To investigate the fracture initiation and propagation behavior of fractures in tight sandstone under the supercritical CO_(2)(SCCO_(2))shock fracturing,laboratory fracturing experiments were conducted using a true-tr...To investigate the fracture initiation and propagation behavior of fractures in tight sandstone under the supercritical CO_(2)(SCCO_(2))shock fracturing,laboratory fracturing experiments were conducted using a true-triaxial-like SCCO_(2)shock fracturing system.Computed tomography(CT)scanning and three-dimensional fracture reconstruction were employed to elucidate the effects of shock pressure,pore pressure,and in-situ stress on fracture characteristics.In addition,nuclear magnetic resonance(NMR)transverse relaxation time spectra were used to assess the internal damage induced by SCCO_(2)shock fracturing.The results indicate that,compared with conventional hydraulic fracturing and SCCO_(2)quasi-static fracturing,SCCO_(2)shock fracturing facilitates multidirectional fracture initiation and the formation of complex fracture networks.Increasing shock pressure more readily activates bedding-plane weaknesses,with main and subsidiary fractures interweaving into a dense fracture network.Under the same impulse intensity,elevated pore pressure reduces the effective normal stress and alters stress-wave scattering paths,thereby inducing more branch fractures and enhancing fracture complexity.An increase in differential in-situ stress promotes fracture propagation along the direction of the maximum principal stress,reduces branching,and simplifies fracture morphology.With increasing SCCO_(2)shock pressure,pore volume and connectivity generally increase:small-to-medium pores primarily respond through increased number and enhanced connectivity;when the shock pressure rises to 40-45 MPa,crack coalescence generates larger pores and fissures,which play a dominant role in improving flow pathways and effective storage space,ultimately forming a multiscale pore-fracture network.展开更多
The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated....The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.展开更多
The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechani...The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechanics analysis with transparent soil model tests.An analytical expression for the stress field at the dominant crack tip was derived from the slope stress distribution by superposing the corresponding stress intensity factors(SIFs).The theoretical predictions were then validated against observations from transparent soil model tests.The influences of slope angle(β),crack inclination angle(α),crack position parameter(b),and crack length parameter(h)on crack initiation and propagation were quantified.The results indicated that:(1)cracks at the slope crest tended to propagate in shear mode,and the shear crack initiation angle(θ_(s))was approximately 8°.Cracks at the slope toe might propagate in either tensile or shear mode.(2)θ_(s) at the slope crest increased withβ,b,and l,and decreased withα.The maximum change inθ_(s) induced by the considered parameters was approximately 30°.(3)The tensile crack initiation angle(θ_(t))at the slop toe decreased withβ,α,and l,while the influence of b was comparatively minor.The maximum change inθ_(t) caused by individual parameters ranged approximately from 25°to 60°.Predicted crack propagation modes and directions showed good agreement with experimental results.These findings provide theoretical guidance for stability assessments of valley slopes controlled by dominant crack propagation.展开更多
Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains chall...Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.展开更多
Creating complex and interconnected fracture networks between injection and production wells is crucial for exploiting hot dry rock(HDR)geothermal energy.However,the simple planar fractures created by conventional hyd...Creating complex and interconnected fracture networks between injection and production wells is crucial for exploiting hot dry rock(HDR)geothermal energy.However,the simple planar fractures created by conventional hydraulic fracturing,primarily controlled by in situ stress,fail to connect directionally with the target well.This study proposes a novel stimulation method,i.e.radial borehole fracturing,which shows great potential for guiding the directional propagation of fractures.The fracture initiation and propagation behaviors of high-temperature granite under radial borehole fracturing are investigated and compared with those of conventional fracturing.Three-dimensional morphological scanning and reinjection tests are used to quantitatively evaluate fracturing performance.Additionally,the influences of key parameters,including rock temperature,in situ stress,injection rate,fluid viscosity,azimuth of the radial borehole,and the number of radial boreholes on the fracture morphology and breakdown pressure are investigated.The results show that radial borehole fracturing can effectively guide the initiation and propagation of fractures along the radial borehole.The breakdown pressure of radial borehole fracturing can be reduced by 14.1%–43.7%compared to conventional fracturing.A higher fluid-rock temperature difference reduces the directional propagation range of fractures guided by the radial borehole.Increases in the vertical density of radial boreholes,injection rate,and fluid viscosity enhance the guiding ability of radial boreholes.Furthermore,there is a competitive relationship between in situ stress and the azimuth of radial boreholes in controlling fracture propagation.This research provides a viable alternative for the directional connection of injection-production wells in HDR reservoirs.展开更多
The fatigue crack initiation and early propagation behavior of 2A97 Al-Li alloy was studied. The smooth specimens were fatigued at room temperature under constant maximum stress control when stress ratio （R） is 0.1 ...The fatigue crack initiation and early propagation behavior of 2A97 Al-Li alloy was studied. The smooth specimens were fatigued at room temperature under constant maximum stress control when stress ratio （R） is 0.1 and frequency （f） is 40 Hz. Microstructure observations were examined by optical microscopy, transmission electron microscopy, scanning electron microscopy and electron back scattered diffusion, in order to investigate the relationship between microstructure and fatigue crack initiation and early propagation behavior of 2A97 alloy. The results show that the fatigue cracks are predominantly initiated at inclusions and coarsen secondary phases on the surface of 2A97 alloy. The fatigue crack early propagation behavior of 2A97 alloy is predominantly influenced by the interactions between grain structure and dislocations or persistent slip bands （PSBs）. When the misorientation of two neighbouring grains is close to the orientations of the favorable slip plane within these two grains, high-angle grain boundary severely hinders the PSBs passing through, and thus leads to crack bifurcation and deflection.展开更多
In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain...In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.展开更多
Using high-resolution observations,mesoscale simulations,and idealized experiments,this study investigates the mechanisms governing an episode of orographic convection initiation(CI)during the North China Heavy Rainfa...Using high-resolution observations,mesoscale simulations,and idealized experiments,this study investigates the mechanisms governing an episode of orographic convection initiation(CI)during the North China Heavy Rainfall Experiment.On 4 August 2024,repeated CI occurred over the eastern slopes of the Taihang Mountains in the late afternoon,subsequently enhancing an upstream downhill convective storm.Wind profiler radar data and dense automatic weather stations reveal that CI was supported by strengthening southeasterly upslope winds.These winds primarily resulted from the migration of the mountain-plain solenoid and the mountainward-propagating outflow from a convective cold pool over the plain,with sensitivity experiments showing the latter contributed roughly 22%of the wind strength.The upslope flows gradually transported unstable air from the plain to the slope,fostering CI.Mesoscale simulations further highlight the key role of orographic waves near the mountain ridge,which generated strong downslope winds.The near-surface convergence between downslope and upslope flows,combined with wave-induced divergence aloft,produced deep ascent over the slope.Removing mountain ridges weakened wave strength and reduced downslope wind speeds by~8 m s^(-1).Without orographic heating in the idealized simulation(i.e.,no mountain-plain solenoid),only strong wave descent occurred below 2km,inhibiting CI.These findings underscore the critical interplay among plain convection,orographic waves,and the mountain-plain solenoid,offering new insight into the processes controlling orographic CI in North China.展开更多
With the increasing application of lithium-ion batteries under high-rate operation,safety concerns such as thermal runaway(TR)and thermal runaway propagation(TRP)have become critical.In this study,the TRP action of ba...With the increasing application of lithium-ion batteries under high-rate operation,safety concerns such as thermal runaway(TR)and thermal runaway propagation(TRP)have become critical.In this study,the TRP action of batteries undergoing high-rate cycling is systematically investigated.Microanalysis results reveal that the crystallinity and I_((003))/I_((104))of the cathode are decreased by 32.95%and 13.01%after 4 C cycling,while the layered structure of the anode is seriously damaged.As revealed,the TR interval time(At)of batteries cycled at 4 C is decreased by 83.23%compared with that for batteries cycled at 1 C.Meanwhile,the maximum mass loss(ML)rate of Battery 2#is increased by 32.35%.We have further investigated the influence of battery spacing on TRP action.The maximum TR temperature of Battery2#at 1.5 cm spacing is reduced by 26.21%compared with the value at 0 cm spacing.When increasing the spacing from 0 to 1.5 cm,the ML of batteries is reduced by 20.73%.ML increases and decreases with the elevation of the charging rate and battery spacing,respectively.Compared with a battery cycled at1 C,a battery cycled at 4 C shows reduced heat required to trigger TR.The corresponding decreases can reach 68.28%,70.10%,76.88%,and 26.15%when setting the spacing at 0,0.6,1.5,and 2.1 cm,respectively.This indicates that Battery 2#can enter TR with much lower heat after high-rate cycling.Overall,high-rate cycling and low spacing accelerate the TRP of the battery and aggravate the TR severity of the battery.This work can provide insights for the practical safety design of energy storage systems.展开更多
Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−freque...Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.展开更多
Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagati...Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.展开更多
Ice lens initiation is the core issue in understanding the dynamic process of frost heave.However,there are still limitations to find an adequate criterion for describing the formation of ice lens.A series of one-dime...Ice lens initiation is the core issue in understanding the dynamic process of frost heave.However,there are still limitations to find an adequate criterion for describing the formation of ice lens.A series of one-dimensional freezing tests is designed using the particle image velocimetry(PIV)method to monitor the frost heave and ice lens formation.The results show that the conventional parameters,such as displacement and velocity,cannot be used to track the ice lens formation,while the strain can be employed to detect the ice lens formation and investigate the freezing change patterns.This study proposes strain as a new criterion for assessing ice lens initiation,applicable across various soil types and freezing conditions(constant freezing and ramped freezing).The strain change in the region where the ice lens forms is the largest during the freezing process.Additionally,strain curves at the top of the soil samples can reveal different freezing patterns and distinguish the first and second frost heave stages.This newly developed technology enables continuous,non-destructive monitoring of ice lens initiation across diverse conditions and soil types,enhancing data visualization and three-dimensional modeling of freezing parameters while improving traditional methods by directly measuring velocity and strain in frost heave investigations.The study is expected to enhance the research of ice lens criterion and provide a new perspective for monitoring the freezing process.展开更多
Glucagon-like peptide-1 receptor agonists,originally developed for the treatment of type 2 diabetes mellitus,have been suggested as a potential disease-modifying treatment for Parkinson’s disease.Some clinical trials...Glucagon-like peptide-1 receptor agonists,originally developed for the treatment of type 2 diabetes mellitus,have been suggested as a potential disease-modifying treatment for Parkinson’s disease.Some clinical trials of glucagon-like peptide-1 receptor agonists have demonstrated that they can alleviate motor dysfunction and improve quality of life for patients with Parkinson’s disease.However,the mechanisms underlying the neuroprotective effects of glucagon-like peptide-1 receptor agonists have yet to be elucidated.In this study,we usedα-synuclein preformed fibrils to generate in vitro and in vivo models of Parkinson’s disease and investigated the effects of a short-acting glucagon-like peptide-1 receptor agonist,lixisenatide,on the propagation ofα-synuclein pathology.We found that lixisenatide reducedα-synuclein phosphorylation,aggregation,and propagation in cells treated withα-synuclein preformed fibrils,and that these effects were accompanied by decreased mitochondrial dysfunction and apoptosis.Additionally,lixisenatide treatment alleviated motor dysfunction and dopaminergic cell neurodegeneration 20 weeks after stereotactic injection ofα-synuclein preformed fibrils into the striatum of wild-type mice.In addition,lixisenatide inhibitedα-synuclein phosphorylation and seeding between neurons,mediated by neuronal lymphocyte-activation gene 3 expression.This study provides new insights into the mechanism underlying the disease-modifying effects of glucagon-like peptide-1 receptor agonists in the treatment of Parkinson’s disease.展开更多
Slope failures,particularly in railway embankments during intense rainfall,are a major cause of economic damage and humanitarian loss.To forecast how shear cracks develop in slopes under heavy precipitation,we present...Slope failures,particularly in railway embankments during intense rainfall,are a major cause of economic damage and humanitarian loss.To forecast how shear cracks develop in slopes under heavy precipitation,we present a novel modeling framework:the Extended Cohesive Damage Element enhanced by soil moisture(SMECDE).The method first translates forecasted rainfall into soil moisture levels via an established correspondence.Then,recognizing that rainfall infiltration lowers soil cohesion—particularly at varying depths—we introduce a Soil Moisture Decoherence Model(SMDM)based on experimental data,which quantifies how cohesion degrades with moisture and how depth affects this process.By embedding SMDM within the ECDE technique,we investigate how shear fractures propagate under different moisture conditions throughout the slope profile.We apply SMECDE to a real railway embankment case to identify critical moisture thresholds and crack growth patterns.Validation is performed by comparing predictions against field measurements and weather station records,and further checked through simulations of large-scale plastic deformation in ABAQUS.展开更多
This article examines fatigue crack nucleation and propagation in laser deposited TC18 titanium alloy. The Widmanstatten structure was obtained by double-annealing treatment,. High-cycle fatigue （HCF） tests were con...This article examines fatigue crack nucleation and propagation in laser deposited TC18 titanium alloy. The Widmanstatten structure was obtained by double-annealing treatment,. High-cycle fatigue （HCF） tests were conducted at room temperature with the stress ratio of 0.1 and the notch concentration factor Kt = 1. Fatigue cracks initiated preferentially at micropores, which had great effect on the HCF properties. The effect decreased with the decrease of pore size and the increase of distance from the pore location to the specimen surface. The crack initiation region was characterized by the cleavage facets of a lamella and the tearing of β matrix. The soft a precipitated-free zone formed along grain boundaries accelerated the crack propagation. Subsurface observation indicated that the crack preferred to propagate along the grain boundary α or border of a lamella or vertical to a lamella.展开更多
A three-dimensional dynamic damage model that fits both small and large damage sizes is developed to predict impact damage initiation and propagation for each lamina of T300-carbon/epoxy laminations.First,13 specimens...A three-dimensional dynamic damage model that fits both small and large damage sizes is developed to predict impact damage initiation and propagation for each lamina of T300-carbon/epoxy laminations.First,13 specimens of the same lamination sequence are subjected to three different impact energies(10 J,15 J,and 20 J).After the impact,the laminates are inspected by the naked eye to observe the damage in the outer layers,and subsequently X-rayed to detect the inner damage.Next,the stress analysis of laminates subjected to impact loading is presented,based on the Hertz contact law and virtual displacement principle.Based on the analysis results,a three-dimensional dynamic damage model is proposed,including the Hou failure criteria and Camanho stiffness degradation model,to predict the impact damage shape and area.The numerical predictions of the damage shape and area show a relatively reasonable agreement with the experiments.Finally,the impact damage initiation and propagation for each lamina are investigated using this damage model,and the results improve the understanding of the impact process.展开更多
In situ fatigue tests in special designed SEM were conducted to trace the whole process of crack initiation and propagation fill to fracture in mckel-base P/M superalloy seeded inclusions. The experimental results sho...In situ fatigue tests in special designed SEM were conducted to trace the whole process of crack initiation and propagation fill to fracture in mckel-base P/M superalloy seeded inclusions. The experimental results show that non-metallic inclusions can induce crack initiation. When the inclusion size is larger than the critical one, the crack can propagate as the main crack that induces the specimen to fracture. As a result, the LCF life of the specimen decreases.展开更多
GH4169 at 650℃ in atmosphere was investigated by using single edge notch tensile specimens. The number of main cracks and crack initiation mechanisms at the notch surface strongly depended on the grain size. The crac...GH4169 at 650℃ in atmosphere was investigated by using single edge notch tensile specimens. The number of main cracks and crack initiation mechanisms at the notch surface strongly depended on the grain size. The crack initiation life accounted for more percentages of the total fatigue life for the alloy with smaller grain size. The fatigue life generally increased with increasing crack initiation life. The small crack transited to long crack when its length reached 10 times the grain size.展开更多
The crack tip stress-strain fields of the elastic-plastic cracked specimens have been analyzed using finite element calculations.The crack initiation and steady propagation behaviours have also been investigated by me...The crack tip stress-strain fields of the elastic-plastic cracked specimens have been analyzed using finite element calculations.The crack initiation and steady propagation behaviours have also been investigated by means of slip line pattern etching technique and mechanical tests. The results show that there are HRR near field and distant field in the crack tip region,and the later depends on the specimen configuration.The crack initiation behaviour is controlled by a single parameter J.In contrast,the steady crack propagation is affected by the distant strain field and can not be described by single parameter only.展开更多
The initiation and propagation of failure in intact rock are a matter of fundamental importance in rock engineering. At low confining pressures, tensile fracturing initiates in samples at 40%-60% of the uniaxial compr...The initiation and propagation of failure in intact rock are a matter of fundamental importance in rock engineering. At low confining pressures, tensile fracturing initiates in samples at 40%-60% of the uniaxial compressive strength and as loading continues, and these tensile fractures increase in density, ultimately coalescing and leading to strain localization and macro-scale shear failure of the samples. The Griffith theory of brittle failure provides a simplified model and a useful basis for discussion of this process. The Hoek-Brown failure criterion provides an acceptable estimate of the peak strength for shear failure but a cutoff has been added for tensile conditions. However, neither of these criteria adequately explains the progressive coalition of tensile cracks and the final shearing of the specimens at higher confining stresses. Grain-based numerical models, in which the grain size distributions as well as the physical properties of the component grains of the rock are incorporated, have proved to be very useful in studying these more complex fracture processes.展开更多
基金Supported by the National Natural Science Foundation for Outstanding Young Scholars(52425402)National Natural Science Foundation of China(52341401)International(Regional)Cooperation and Exchange Program of the National Natural Science Foundation of China(W2412078)。
文摘To investigate the fracture initiation and propagation behavior of fractures in tight sandstone under the supercritical CO_(2)(SCCO_(2))shock fracturing,laboratory fracturing experiments were conducted using a true-triaxial-like SCCO_(2)shock fracturing system.Computed tomography(CT)scanning and three-dimensional fracture reconstruction were employed to elucidate the effects of shock pressure,pore pressure,and in-situ stress on fracture characteristics.In addition,nuclear magnetic resonance(NMR)transverse relaxation time spectra were used to assess the internal damage induced by SCCO_(2)shock fracturing.The results indicate that,compared with conventional hydraulic fracturing and SCCO_(2)quasi-static fracturing,SCCO_(2)shock fracturing facilitates multidirectional fracture initiation and the formation of complex fracture networks.Increasing shock pressure more readily activates bedding-plane weaknesses,with main and subsidiary fractures interweaving into a dense fracture network.Under the same impulse intensity,elevated pore pressure reduces the effective normal stress and alters stress-wave scattering paths,thereby inducing more branch fractures and enhancing fracture complexity.An increase in differential in-situ stress promotes fracture propagation along the direction of the maximum principal stress,reduces branching,and simplifies fracture morphology.With increasing SCCO_(2)shock pressure,pore volume and connectivity generally increase:small-to-medium pores primarily respond through increased number and enhanced connectivity;when the shock pressure rises to 40-45 MPa,crack coalescence generates larger pores and fissures,which play a dominant role in improving flow pathways and effective storage space,ultimately forming a multiscale pore-fracture network.
基金supported by the National Natural Science Foundation of China(No.52090041).
文摘The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.
基金financially supported by the National Nature Science Foundation of China(Nos.52379110 and 42207222)the Key Technologies for Accurate Diagnosis and Intelligent Prevention and Control of Slope Hazards in Open Pit Mines,181 Major R&D projects of Metallurgical Corporation of China Ltd。
文摘The stability of rock slopes is frequently controlled by the initiation and propagation of inherent dominant cracks.This study systematically investigated these processes in valley slopes by combining fracture-mechanics analysis with transparent soil model tests.An analytical expression for the stress field at the dominant crack tip was derived from the slope stress distribution by superposing the corresponding stress intensity factors(SIFs).The theoretical predictions were then validated against observations from transparent soil model tests.The influences of slope angle(β),crack inclination angle(α),crack position parameter(b),and crack length parameter(h)on crack initiation and propagation were quantified.The results indicated that:(1)cracks at the slope crest tended to propagate in shear mode,and the shear crack initiation angle(θ_(s))was approximately 8°.Cracks at the slope toe might propagate in either tensile or shear mode.(2)θ_(s) at the slope crest increased withβ,b,and l,and decreased withα.The maximum change inθ_(s) induced by the considered parameters was approximately 30°.(3)The tensile crack initiation angle(θ_(t))at the slop toe decreased withβ,α,and l,while the influence of b was comparatively minor.The maximum change inθ_(t) caused by individual parameters ranged approximately from 25°to 60°.Predicted crack propagation modes and directions showed good agreement with experimental results.These findings provide theoretical guidance for stability assessments of valley slopes controlled by dominant crack propagation.
基金supported by the National Key Research and Development Program(2021YFB150740401)National Natural Science Foundation of China(42202336)the CAS Pioneer Hundred Talents Program in China(Y826031C01)。
文摘Hydraulic stimulation technology is widely employed to enhance the permeability of geothermal reservoirs.Nevertheless,accurately predicting hydraulic fracture propagation in complex geological conditions remains challenging,thereby hindering the effective utilization of existing natural fractures.In this study,a phase field model was developed utilizing the finite element method to examine the influence of fluid presence,stress conditions,and natural fractures on the initiation and propagation of hydraulic fractures.The model employs Biot's poroelasticity theory to establish the coupling between the displacement field and the fluid field,while the phase field theory is applied to simulate fracture behavior.The results show that whenσ_(x0)/σ_(y0)<3 or qf<20 kg/(m^(3)·s),the presence of natural fractures can alter the original propagation direction of hydraulic fractures.Conversely,in the absence of these conditions,the propagation path of natural fractures is predominantly influenced by the initial stress field.Furthermore,based on the analysis of breakdown pressure and damage area,the optimal intersection angle between natural fractures and hydraulic fractures is determined to range from 45°to 60°.Finally,once a dominant channel forms,initiating and propagating hydraulic fractures in other directions becomes increasingly difficult,even in highly fractured areas.This method tackles the challenges of initiating and propagating hydraulic fractures in complex geological conditions,providing a theoretical basis for optimizing Enhanced Geothermal System(EGS)projects.
基金supported by the National Science Fund of China for Major International(Regional)Joint Research Project(Grant No.52020105001)the National Natural Science Foundation of China(Grant Nos.52304053 and 52204019).
文摘Creating complex and interconnected fracture networks between injection and production wells is crucial for exploiting hot dry rock(HDR)geothermal energy.However,the simple planar fractures created by conventional hydraulic fracturing,primarily controlled by in situ stress,fail to connect directionally with the target well.This study proposes a novel stimulation method,i.e.radial borehole fracturing,which shows great potential for guiding the directional propagation of fractures.The fracture initiation and propagation behaviors of high-temperature granite under radial borehole fracturing are investigated and compared with those of conventional fracturing.Three-dimensional morphological scanning and reinjection tests are used to quantitatively evaluate fracturing performance.Additionally,the influences of key parameters,including rock temperature,in situ stress,injection rate,fluid viscosity,azimuth of the radial borehole,and the number of radial boreholes on the fracture morphology and breakdown pressure are investigated.The results show that radial borehole fracturing can effectively guide the initiation and propagation of fractures along the radial borehole.The breakdown pressure of radial borehole fracturing can be reduced by 14.1%–43.7%compared to conventional fracturing.A higher fluid-rock temperature difference reduces the directional propagation range of fractures guided by the radial borehole.Increases in the vertical density of radial boreholes,injection rate,and fluid viscosity enhance the guiding ability of radial boreholes.Furthermore,there is a competitive relationship between in situ stress and the azimuth of radial boreholes in controlling fracture propagation.This research provides a viable alternative for the directional connection of injection-production wells in HDR reservoirs.
文摘The fatigue crack initiation and early propagation behavior of 2A97 Al-Li alloy was studied. The smooth specimens were fatigued at room temperature under constant maximum stress control when stress ratio （R） is 0.1 and frequency （f） is 40 Hz. Microstructure observations were examined by optical microscopy, transmission electron microscopy, scanning electron microscopy and electron back scattered diffusion, in order to investigate the relationship between microstructure and fatigue crack initiation and early propagation behavior of 2A97 alloy. The results show that the fatigue cracks are predominantly initiated at inclusions and coarsen secondary phases on the surface of 2A97 alloy. The fatigue crack early propagation behavior of 2A97 alloy is predominantly influenced by the interactions between grain structure and dislocations or persistent slip bands （PSBs）. When the misorientation of two neighbouring grains is close to the orientations of the favorable slip plane within these two grains, high-angle grain boundary severely hinders the PSBs passing through, and thus leads to crack bifurcation and deflection.
基金supported by the Anhui Quality Infrastructure Standardization Project(Grant No.2024MKSO7)the Science and Technology Project of State Grid(SGAHDK00DJJS2310027)the Anhui Provincial Natural Science Foundation(Grant No.2208085UD03).
文摘In electrochemical energy storage systems,the sodium-ion battery is typically integrated in the form of a“cell-module-cluster”,but its cross-scale thermal runaway triggering risk and the propagation mechanism remain unclear.This study reveals the cross-scale thermal runaway triggering and propagation behavior of sodium-ion batteries of“cell-module-cluster”under overcharge conditions,and investigates the effects of key factors,including module spacing,triggering cell location,and heat dissipation condition,on the thermal runaway propagation behavior.Results demonstrate that the thermal runaway propagation in a module containing the overcharged cell follows a sequential triggering mode,while thermal runaway in the downstream module exhibits a simultaneous triggering mode with greater severity.Furthermore,increasing the module spacing or enhancing the heat dissipation capacity can effectively reduce the heat accumulation and prevent the trigger of thermal runaway.On the above basis,the multi-dimensional evaluation strategy is proposed to quantitatively assess the hazard of sodium-ion battery cluster thermal runaway.The findings serve as a foundation for the safe design of sodium-ion batteries in energy storage systems.
基金supported by the National Key Research and Development Program of China(Grant No.2024YFC3013003)the National Natural Science Foundation of China(Grant Nos.424B2033 and 42475002)+3 种基金projects supported by the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(Grant Nos.SML2024SP035,SML2024SP012,311024001)the Guangdong Project of Basic and Applied Basic Research(Grant Nos.2024A1515510005 and2025A1515011974)the Key Innovation Team of the China Meteorological Administration(Grant No.CMA2023ZD08)the State Key Laboratory of Severe Weather Meteorological Science and Technology(Grant No.2025QZA10)。
文摘Using high-resolution observations,mesoscale simulations,and idealized experiments,this study investigates the mechanisms governing an episode of orographic convection initiation(CI)during the North China Heavy Rainfall Experiment.On 4 August 2024,repeated CI occurred over the eastern slopes of the Taihang Mountains in the late afternoon,subsequently enhancing an upstream downhill convective storm.Wind profiler radar data and dense automatic weather stations reveal that CI was supported by strengthening southeasterly upslope winds.These winds primarily resulted from the migration of the mountain-plain solenoid and the mountainward-propagating outflow from a convective cold pool over the plain,with sensitivity experiments showing the latter contributed roughly 22%of the wind strength.The upslope flows gradually transported unstable air from the plain to the slope,fostering CI.Mesoscale simulations further highlight the key role of orographic waves near the mountain ridge,which generated strong downslope winds.The near-surface convergence between downslope and upslope flows,combined with wave-induced divergence aloft,produced deep ascent over the slope.Removing mountain ridges weakened wave strength and reduced downslope wind speeds by~8 m s^(-1).Without orographic heating in the idealized simulation(i.e.,no mountain-plain solenoid),only strong wave descent occurred below 2km,inhibiting CI.These findings underscore the critical interplay among plain convection,orographic waves,and the mountain-plain solenoid,offering new insight into the processes controlling orographic CI in North China.
基金supported by the National Key Research and Development Plan(2023YFC30099000)the National Natural Science Foundation of China(52104197,52272396,52474233)+2 种基金the Major Basic Research Project of the Natural Science Foundation of the Jiangsu Higher Education Institutions(2020240521)the Open Fund of the State Key Laboratory of Fire Science(SKLFS)Program(HZ2025-KF03)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(SJCX25_0595)。
文摘With the increasing application of lithium-ion batteries under high-rate operation,safety concerns such as thermal runaway(TR)and thermal runaway propagation(TRP)have become critical.In this study,the TRP action of batteries undergoing high-rate cycling is systematically investigated.Microanalysis results reveal that the crystallinity and I_((003))/I_((104))of the cathode are decreased by 32.95%and 13.01%after 4 C cycling,while the layered structure of the anode is seriously damaged.As revealed,the TR interval time(At)of batteries cycled at 4 C is decreased by 83.23%compared with that for batteries cycled at 1 C.Meanwhile,the maximum mass loss(ML)rate of Battery 2#is increased by 32.35%.We have further investigated the influence of battery spacing on TRP action.The maximum TR temperature of Battery2#at 1.5 cm spacing is reduced by 26.21%compared with the value at 0 cm spacing.When increasing the spacing from 0 to 1.5 cm,the ML of batteries is reduced by 20.73%.ML increases and decreases with the elevation of the charging rate and battery spacing,respectively.Compared with a battery cycled at1 C,a battery cycled at 4 C shows reduced heat required to trigger TR.The corresponding decreases can reach 68.28%,70.10%,76.88%,and 26.15%when setting the spacing at 0,0.6,1.5,and 2.1 cm,respectively.This indicates that Battery 2#can enter TR with much lower heat after high-rate cycling.Overall,high-rate cycling and low spacing accelerate the TRP of the battery and aggravate the TR severity of the battery.This work can provide insights for the practical safety design of energy storage systems.
基金funded by the Science and Technology Program of State Grid Corporation of China(5500-202356358A-2-1-ZX).
文摘Arc faults within the transformers can generate sudden pressure surges,constituting significant hazards that may precipitate oil tank explosions and severely compromise power system stability.Conventional power−frequency arc discharge experiments encounter limitations in isolating pressure wave characteristics due to persistent gas generation and arc reignition.To circumvent these challenges,an oil-immersed impulse voltage discharge platform was conceived and engineered to investigate pressure wave propagation dynamics.A pressure numerical simulation model and theoretical model of oil−solid interface reflection and refraction were subsequently established to elucidate the pressure propagation mechanism.The experimental and simulation results show that the pressure wave generated by pulsed arc discharge in oil propagates radially in the form of spherical waves.Due to the viscous loss and wave front expansion of transformer oil,the peak pressure decays exponentially with distance,with a decay coefficientβ=1.15.When pressure waves encounter metal obstacles inside transformer oil,there are two propagation paths:direct transmission through and multiple reflections through,and a mode transformation of pressure waves occurs at the oil−solid interface,mainly propagating through obstacles in the form of transverse waves.This work quantitatively delineates the energy pressure wave coupling,propagation dynamics,and attenuation mechanisms,providing critical insights for assessing and mitigating arc fault-induced transformer explosion risks.
文摘Hydraulic fracturing serves as a critical technology for reservoir stimulation in deep coalbed methane(CBM)development,where the mechanical properties of gangue layers exert a significant control on fracture propagation behavior.To address the unclear mechanisms governing fracture penetration across coal-gangue interfaces,this study employs the Continuum-Discontinuum Element Method(CDEM)to simulate and analyze the vertical propagation of hydraulic fractures initiating within coal seams,based on geomechanical parameters derived from the deep Benxi Formation coal seams in the southeastern Ordos Basin.The investigation systematically examines the influence of geological and operational parameters on cross-interfacial fracture growth.Results demonstrate that vertical stress difference,elastic modulus contrast between coal and gangue layers,interfacial stress differential,and interfacial cohesion at coal-gangue interfaces are critical factors governing hydraulic fracture penetration through these interfaces.High vertical stress differences(>3 MPa)inhibit interfacial dilation,promoting predominant crosslayer fracture propagation.Reduced interfacial stress contrasts and enhanced interfacial cohesion facilitate fracture penetration across interfaces.Furthermore,smaller elastic modulus contrasts between coal and gangue correlate with increased interfacial aperture.Finally,lower injection rates effectively suppress vertical fracture propagation in deep coal reservoirs.This study elucidates the characteristics and mechanisms governing cross-layer fracture propagation in coal–rock composites with interbedded partings,and delineates the dynamic evolution laws and dominant controlling factors involved.Thefindings provide critical theoretical insights for the optimization of fracture design and the efficient development of deep coalbed methane reservoirs.
基金supported by the National Natural Science Foundation of China(Grant No.52178376)National Key R&D Program of China(Grant No.2022YFB2603301)Science and Technology Research and Development Program of China Railway Group Limited(Grant No.2022-ZD-13).
文摘Ice lens initiation is the core issue in understanding the dynamic process of frost heave.However,there are still limitations to find an adequate criterion for describing the formation of ice lens.A series of one-dimensional freezing tests is designed using the particle image velocimetry(PIV)method to monitor the frost heave and ice lens formation.The results show that the conventional parameters,such as displacement and velocity,cannot be used to track the ice lens formation,while the strain can be employed to detect the ice lens formation and investigate the freezing change patterns.This study proposes strain as a new criterion for assessing ice lens initiation,applicable across various soil types and freezing conditions(constant freezing and ramped freezing).The strain change in the region where the ice lens forms is the largest during the freezing process.Additionally,strain curves at the top of the soil samples can reveal different freezing patterns and distinguish the first and second frost heave stages.This newly developed technology enables continuous,non-destructive monitoring of ice lens initiation across diverse conditions and soil types,enhancing data visualization and three-dimensional modeling of freezing parameters while improving traditional methods by directly measuring velocity and strain in frost heave investigations.The study is expected to enhance the research of ice lens criterion and provide a new perspective for monitoring the freezing process.
基金supported by the National Natural Science Foundation of China,No.82271446(to JX).
文摘Glucagon-like peptide-1 receptor agonists,originally developed for the treatment of type 2 diabetes mellitus,have been suggested as a potential disease-modifying treatment for Parkinson’s disease.Some clinical trials of glucagon-like peptide-1 receptor agonists have demonstrated that they can alleviate motor dysfunction and improve quality of life for patients with Parkinson’s disease.However,the mechanisms underlying the neuroprotective effects of glucagon-like peptide-1 receptor agonists have yet to be elucidated.In this study,we usedα-synuclein preformed fibrils to generate in vitro and in vivo models of Parkinson’s disease and investigated the effects of a short-acting glucagon-like peptide-1 receptor agonist,lixisenatide,on the propagation ofα-synuclein pathology.We found that lixisenatide reducedα-synuclein phosphorylation,aggregation,and propagation in cells treated withα-synuclein preformed fibrils,and that these effects were accompanied by decreased mitochondrial dysfunction and apoptosis.Additionally,lixisenatide treatment alleviated motor dysfunction and dopaminergic cell neurodegeneration 20 weeks after stereotactic injection ofα-synuclein preformed fibrils into the striatum of wild-type mice.In addition,lixisenatide inhibitedα-synuclein phosphorylation and seeding between neurons,mediated by neuronal lymphocyte-activation gene 3 expression.This study provides new insights into the mechanism underlying the disease-modifying effects of glucagon-like peptide-1 receptor agonists in the treatment of Parkinson’s disease.
文摘Slope failures,particularly in railway embankments during intense rainfall,are a major cause of economic damage and humanitarian loss.To forecast how shear cracks develop in slopes under heavy precipitation,we present a novel modeling framework:the Extended Cohesive Damage Element enhanced by soil moisture(SMECDE).The method first translates forecasted rainfall into soil moisture levels via an established correspondence.Then,recognizing that rainfall infiltration lowers soil cohesion—particularly at varying depths—we introduce a Soil Moisture Decoherence Model(SMDM)based on experimental data,which quantifies how cohesion degrades with moisture and how depth affects this process.By embedding SMDM within the ECDE technique,we investigate how shear fractures propagate under different moisture conditions throughout the slope profile.We apply SMECDE to a real railway embankment case to identify critical moisture thresholds and crack growth patterns.Validation is performed by comparing predictions against field measurements and weather station records,and further checked through simulations of large-scale plastic deformation in ABAQUS.
基金financially supported by the Cheung Kong Scholars Innovative Research Team Program of Ministry of Education, China (No. IRT0805)the State Key Basic Research Program of China (No. 2011CB606305)
文摘This article examines fatigue crack nucleation and propagation in laser deposited TC18 titanium alloy. The Widmanstatten structure was obtained by double-annealing treatment,. High-cycle fatigue （HCF） tests were conducted at room temperature with the stress ratio of 0.1 and the notch concentration factor Kt = 1. Fatigue cracks initiated preferentially at micropores, which had great effect on the HCF properties. The effect decreased with the decrease of pore size and the increase of distance from the pore location to the specimen surface. The crack initiation region was characterized by the cleavage facets of a lamella and the tearing of β matrix. The soft a precipitated-free zone formed along grain boundaries accelerated the crack propagation. Subsurface observation indicated that the crack preferred to propagate along the grain boundary α or border of a lamella or vertical to a lamella.
文摘A three-dimensional dynamic damage model that fits both small and large damage sizes is developed to predict impact damage initiation and propagation for each lamina of T300-carbon/epoxy laminations.First,13 specimens of the same lamination sequence are subjected to three different impact energies(10 J,15 J,and 20 J).After the impact,the laminates are inspected by the naked eye to observe the damage in the outer layers,and subsequently X-rayed to detect the inner damage.Next,the stress analysis of laminates subjected to impact loading is presented,based on the Hertz contact law and virtual displacement principle.Based on the analysis results,a three-dimensional dynamic damage model is proposed,including the Hou failure criteria and Camanho stiffness degradation model,to predict the impact damage shape and area.The numerical predictions of the damage shape and area show a relatively reasonable agreement with the experiments.Finally,the impact damage initiation and propagation for each lamina are investigated using this damage model,and the results improve the understanding of the impact process.
文摘In situ fatigue tests in special designed SEM were conducted to trace the whole process of crack initiation and propagation fill to fracture in mckel-base P/M superalloy seeded inclusions. The experimental results show that non-metallic inclusions can induce crack initiation. When the inclusion size is larger than the critical one, the crack can propagate as the main crack that induces the specimen to fracture. As a result, the LCF life of the specimen decreases.
基金ffinancially supported by the National Natural Science Foundations of China (Nos. 51725503, 51605164 and 51575183)the 111 project+3 种基金support by Shanghai Technology Innovation Program of SHEITC (No. CXY-2015-001)Fok Ying Tung Education Foundationsupport by Shanghai Sailing Program (No. 16YF1402300)Shanghai Chenguang Program (No. 16CG34).
文摘GH4169 at 650℃ in atmosphere was investigated by using single edge notch tensile specimens. The number of main cracks and crack initiation mechanisms at the notch surface strongly depended on the grain size. The crack initiation life accounted for more percentages of the total fatigue life for the alloy with smaller grain size. The fatigue life generally increased with increasing crack initiation life. The small crack transited to long crack when its length reached 10 times the grain size.
文摘The crack tip stress-strain fields of the elastic-plastic cracked specimens have been analyzed using finite element calculations.The crack initiation and steady propagation behaviours have also been investigated by means of slip line pattern etching technique and mechanical tests. The results show that there are HRR near field and distant field in the crack tip region,and the later depends on the specimen configuration.The crack initiation behaviour is controlled by a single parameter J.In contrast,the steady crack propagation is affected by the distant strain field and can not be described by single parameter only.
文摘The initiation and propagation of failure in intact rock are a matter of fundamental importance in rock engineering. At low confining pressures, tensile fracturing initiates in samples at 40%-60% of the uniaxial compressive strength and as loading continues, and these tensile fractures increase in density, ultimately coalescing and leading to strain localization and macro-scale shear failure of the samples. The Griffith theory of brittle failure provides a simplified model and a useful basis for discussion of this process. The Hoek-Brown failure criterion provides an acceptable estimate of the peak strength for shear failure but a cutoff has been added for tensile conditions. However, neither of these criteria adequately explains the progressive coalition of tensile cracks and the final shearing of the specimens at higher confining stresses. Grain-based numerical models, in which the grain size distributions as well as the physical properties of the component grains of the rock are incorporated, have proved to be very useful in studying these more complex fracture processes.
