Robustness against measurement uncertainties is crucial for gas turbine engine diagnosis.While current research focuses mainly on measurement noise,measurement bias remains challenging.This study proposes a novel perf...Robustness against measurement uncertainties is crucial for gas turbine engine diagnosis.While current research focuses mainly on measurement noise,measurement bias remains challenging.This study proposes a novel performance-based fault detection and identification(FDI)strategy for twin-shaft turbofan gas turbine engines and addresses these uncertainties through a first-order Takagi-Sugeno-Kang fuzzy inference system.To handle ambient condition changes,we use parameter correction to preprocess the raw measurement data,which reduces the FDI’s system complexity.Additionally,the power-level angle is set as a scheduling parameter to reduce the number of rules in the TSK-based FDI system.The data for designing,training,and testing the proposed FDI strategy are generated using a component-level turbofan engine model.The antecedent and consequent parameters of the TSK-based FDI system are optimized using the particle swarm optimization algorithm and ridge regression.A robust structure combining a specialized fuzzy inference system with the TSK-based FDI system is proposed to handle measurement biases.The performance of the first-order TSK-based FDI system and robust FDI structure are evaluated through comprehensive simulation studies.Comparative studies confirm the superior accuracy of the first-order TSK-based FDI system in fault detection,isolation,and identification.The robust structure demonstrates a 2%-8%improvement in the success rate index under relatively large measurement bias conditions,thereby indicating excellent robustness.Accuracy against significant bias values and computation time are also evaluated,suggesting that the proposed robust structure has desirable online performance.This study proposes a novel FDI strategy that effectively addresses measurement uncertainties.展开更多
Published proof test coverage(PTC)estimates for emergency shutdown valves(ESDVs)show only moderate agreement and are predominantly opinion-based.A Failure Modes,Effects,and Diagnostics Analysis(FMEDA)was undertaken us...Published proof test coverage(PTC)estimates for emergency shutdown valves(ESDVs)show only moderate agreement and are predominantly opinion-based.A Failure Modes,Effects,and Diagnostics Analysis(FMEDA)was undertaken using component failure rate data to predict PTC for a full stroke test and a partial stroke test.Given the subjective and uncertain aspects of the FMEDA approach,specifically the selection of component failure rates and the determination of the probability of detecting failure modes,a Fuzzy Inference System(FIS)was proposed to manage the data,addressing the inherent uncertainties.Fuzzy inference systems have been used previously for various FMEA type assessments,but this is the first time an FIS has been employed for use with FMEDA.ESDV PTC values were generated from both the standard FMEDA and the fuzzy-FMEDA approaches using data provided by FMEDA experts.This work demonstrates that fuzzy inference systems can address the subjectivity inherent in FMEDA data,enabling reliable estimates of ESDV proof test coverage for both full and partial stroke tests.This facilitates optimized maintenance planning while ensuring safety is not compromised.展开更多
In recent years,the world has seen an exponential increase in energy demand,prompting scientists to look for innovative ways to exploit the power sun’s power.Solar energy technologies use the sun’s energy and light ...In recent years,the world has seen an exponential increase in energy demand,prompting scientists to look for innovative ways to exploit the power sun’s power.Solar energy technologies use the sun’s energy and light to provide heating,lighting,hot water,electricity and even cooling for homes,businesses,and industries.Therefore,ground-level solar radiation data is important for these applications.Thus,our work aims to use a mathematical modeling tool to predict solar irradiation.For this purpose,we are interested in the application of the Adaptive Neuro Fuzzy Inference System.Through this type of artificial neural system,10 models were developed,based on meteorological data such as the Day number(Nj),Ambient temperature(T),Relative Humidity(Hr),Wind speed(WS),Wind direction(WD),Declination(δ),Irradiation outside the atmosphere(Goh),Maximum temperature(Tmax),Minimum temperature(Tmin).These models have been tested by different static indicators to choose the most suitable one for the estimation of the daily global solar radiation.This study led us to choose the M8 model,which takes Nj,T,Hr,δ,Ws,Wd,G0,and S0 as input variables because it presents the best performance either in the learning phase(R^(2)=0.981,RMSE=0.107 kW/m^(2),MAE=0.089 kW/m2)or in the validation phase(R^(2)=0.979,RMSE=0.117 kW/m^(2),MAE=0.101 kW/m^(2)).展开更多
Synthesis characteristics of the electro-hydraulic servo valve are key factors to determine eligibility of the hydraulic production.Testing all synthesis characteristics of the electro-hydraulic servo valve after asse...Synthesis characteristics of the electro-hydraulic servo valve are key factors to determine eligibility of the hydraulic production.Testing all synthesis characteristics of the electro-hydraulic servo valve after assembling leads to high repair rate and reject rate,so accurate prediction for the synthesis characteristics in the industrial production is particular important in decreasing the repair rate and the reject rate of the product.However,the research in forecasting synthesis characteristics of the electro-hydraulic servo valve is rare.In this work,a hybrid prediction method was proposed based on rough set(RS)and adaptive neuro-fuzzy inference system(ANFIS)in order to predict synthesis characteristics of electro-hydraulic servo valve.Since the geometric factors affecting the synthesis characteristics of the electro-hydraulic servo valve are from workers'experience,the inputs of the prediction method are uncertain.RS-based attributes reduction was used as the preprocessor,and then the exact geometric factors affecting the synthesis characteristics of the electro-hydraulic servo valve were obtained.On the basis of the exact geometric factors,ANFIS was used to build the final prediction model.A typical electro-hydraulic servo valve production was used to demonstrate the proposed prediction method.The prediction results showed that the proposed prediction method was more applicable than the artificial neural networks(ANN)in predicting the synthesis characteristics of electro-hydraulic servo valve,and the proposed prediction method was a powerful tool to predict synthesis characteristics of the electro-hydraulic servo valve.Moreover,with the use of the advantages of RS and ANFIS,the highly effective forecasting framework in this study can also be applied to other problems involving synthesis characteristics forecasting.展开更多
An adaptive neuro fuzzy inference system was used for classifying water quality status of river. It applied several physical and inorganic chemical indicators including dissolved oxygen, chemical oxygen demand, and am...An adaptive neuro fuzzy inference system was used for classifying water quality status of river. It applied several physical and inorganic chemical indicators including dissolved oxygen, chemical oxygen demand, and ammonia-nitrogen. A data set （nine weeks, total 845 observations） was collected from 100 monitoring stations in all major river basins in China and used for training and validating the model. Up to 89.59% of the data could be correctly classified using this model. Such performance was more competitive when compared with artificial neural networks. It is applicable in evaluation and classification of water quality status.展开更多
An efficient and accurate prediction of a precise tidal level in estuaries and coastal areas is indispensable for the management and decision-making of human activity in the field wok of marine engineering. The variat...An efficient and accurate prediction of a precise tidal level in estuaries and coastal areas is indispensable for the management and decision-making of human activity in the field wok of marine engineering. The variation of the tidal level is a time-varying process. The time-varying factors including interference from the external environment that cause the change of tides are fairly complicated. Furthermore, tidal variations are affected not only by periodic movement of celestial bodies but also by time-varying interference from the external environment. Consequently, for the efficient and precise tidal level prediction, a neuro-fuzzy hybrid technology based on the combination of harmonic analysis and adaptive network-based fuzzy inference system（ANFIS）model is utilized to construct a precise tidal level prediction system, which takes both advantages of the harmonic analysis method and the ANFIS network. The proposed prediction model is composed of two modules： the astronomical tide module caused by celestial bodies’ movement and the non-astronomical tide module caused by various meteorological and other environmental factors. To generate a fuzzy inference system（FIS） structure,three approaches which include grid partition（GP）, fuzzy c-means（FCM） and sub-clustering（SC） are used in the ANFIS network constructing process. Furthermore, to obtain the optimal ANFIS based prediction model, large numbers of simulation experiments are implemented for each FIS generating approach. In this tidal prediction study, the optimal ANFIS model is used to predict the non-astronomical tide module, while the conventional harmonic analysis model is used to predict the astronomical tide module. The final prediction result is performed by combining the estimation outputs of the harmonious analysis model and the optimal ANFIS model. To demonstrate the applicability and capability of the proposed novel prediction model, measured tidal level samples of Fort Pulaski tidal station are selected as the testing database. Simulation and experimental results confirm that the proposed prediction approach can achieve precise predictions for the tidal level with high accuracy, satisfactory convergence and stability.展开更多
This paper deals with the estimation of crest settlement in a concrete face rockfill dam （CFRD）, utilizing intelligent methods. Following completion of dam construction, considerable movements of the crest and the b...This paper deals with the estimation of crest settlement in a concrete face rockfill dam （CFRD）, utilizing intelligent methods. Following completion of dam construction, considerable movements of the crest and the body of the dam can develop during the first impoundment of the reservoir. Although there is vast experience worldwide in CFRD design and construction, few accurate experimental relationships are available to predict the settlement in CFRD. The goal is to advance the development of intelligent methods to estimate the subsidence of dams at the design stage. Due to dam zonifieation and uncertainties in material properties, these methods appear to be the appropriate choice. In this study, the crest settlement behavior of CFRDs is analyzed based on compiled data of 24 CFRDs constructed during recent years around the world, along with the utilization of gene ex- pression programming （GEP） and adaptive neuro-fuzzy inference system （ANFIS） methods. In addition, dam height （H）, shape factor （St）, and time （t, time after first operation） are also assessed, being considered major factors in predicting the settlement behavior. From the relationships proposed, the values ofR2 for both equations of GEP （with and without constant） were 0.9603 and 0.9734, and for the three approaches of ANFIS （grid partitioning （GP）, subtractive clustering method （SCM）, and fuzzy c-means clustering （FCM）） were 0.9693, 0.8657, and 0.8848, respectively. The obtained results indicate that the overall behavior evaluated by this approach is consistent with the measured data of other CFRDs.展开更多
Composition estimation plays very important role in plant operation and control.Extended Kalman filter(EKF) is one of the most common estimators,which has been used in composition estimation of reactive batch distilla...Composition estimation plays very important role in plant operation and control.Extended Kalman filter(EKF) is one of the most common estimators,which has been used in composition estimation of reactive batch distillation,but its performance is heavily dependent on the thermodynamic modeling of vapor-liquid equilibrium,which is difficult to initialize and tune.In this paper an inferential state estimation scheme based on adaptive neuro-fuzzy inference system(ANFIS) ,which is a model base estimator,is employed for composition estimation by using temperature measurements in multicomponent reactive batch distillation.The state estimator is supported by data from a complete dynamic model that includes component and energy balance equations accompanied with thermodynamic relations and reaction kinetics.The mathematical model is verified by pilot plant data.The simulation results show that the ANFIS estimator provides reliable and accurate estimation for component concentrations in reactive batch distillation.The estimated states form a basis for improving the performance of reactive batch distillation either through decision making of an operator or through an automatic closed-loop control scheme.展开更多
Semiconductor manufacturing (SM) system is one of the most complicated hybrid processes involved continuously variable dynamical systems and discrete event dynamical systems. The optimization and scheduling of semicon...Semiconductor manufacturing (SM) system is one of the most complicated hybrid processes involved continuously variable dynamical systems and discrete event dynamical systems. The optimization and scheduling of semiconductor fabrication has long been a hot research direction in automation. Bottleneck is the key factor to a SM system, which seriously influences the throughput rate, cycle time, time-delivery rate, etc. Efficient prediction for the bottleneck of a SM system provides the best support for the consequent scheduling. Because categorical data (product types, releasing strategies) and numerical data (work in process, processing time, utilization rate, buffer length, etc.) have significant effect on bottleneck, an improved adaptive network-based fuzzy inference system (ANFIS) was adopted in this study to predict bottleneck since conventional neural network-based methods accommodate only numerical inputs. In this improved ANFIS, the contribution of categorical inputs to firing strength is reflected through a transformation matrix. In order to tackle high-dimensional inputs, reduce the number of fuzzy rules and obtain high prediction accuracy, a fuzzy c-means method combining binary tree linear division method was applied to identify the initial structure of fuzzy inference system. According to the experimental results, the main-bottleneck and sub-bottleneck of SM system can be predicted accurately with the proposed method.展开更多
An adaptive neuro-fuzzy inference system(ANFIS) for predicting the performance of a reversibly used cooling tower(RUCT) under cross flow conditions as part of a heat pump system for a heating mode in winter was demons...An adaptive neuro-fuzzy inference system(ANFIS) for predicting the performance of a reversibly used cooling tower(RUCT) under cross flow conditions as part of a heat pump system for a heating mode in winter was demonstrated.Extensive field experimental work was carried out in order to gather enough data for training and prediction.The statistical methods,such as the correlation coefficient,absolute fraction of variance and root mean square error,were given to compare the predicted and actual values for model validation.The simulation results predicted with the ANFIS can be used to simulate the performance of a reversibly used cooling tower quite accurately.Therefore,the ANFIS approach can reliably be used for forecasting the performance of RUCT.展开更多
Automatic diagnosis tool helps physicians to evaluate capsule endoscopic examinations faster and more accurate.The purpose of this study was to evaluate the validity and reliability of an automatic post-processing met...Automatic diagnosis tool helps physicians to evaluate capsule endoscopic examinations faster and more accurate.The purpose of this study was to evaluate the validity and reliability of an automatic post-processing method for identifying and classifying wireless capsule endoscopic images, and investigate statistical measures to differentiate normal and abnormal images. The proposed technique consists of two main stages, namely, feature extraction and classification. Primarily, 32 features incorporating four statistical measures(contrast, correlation, homogeneity and energy) calculated from co-occurrence metrics were computed. Then, mutual information was used to select features with maximal dependence on the target class and with minimal redundancy between features. Finally, a trained classifier, adaptive neuro-fuzzy interface system was implemented to classify endoscopic images into tumor, healthy and unhealthy classes. Classification accuracy of 94.2% was obtained using the proposed pipeline. Such techniques are valuable for accurate detection characterization and interpretation of endoscopic images.展开更多
The spontaneous combustion is a smoldering process and characterized by a slow burning speed and a long duration. Therefore, it is a hazard to coal mines. Early detection of coal mine spontaneous combustion is quite d...The spontaneous combustion is a smoldering process and characterized by a slow burning speed and a long duration. Therefore, it is a hazard to coal mines. Early detection of coal mine spontaneous combustion is quite difficult because of the complexity of different coal mines. And the traditional threshold discriminance is not suitable for spontaneous combustion detection due to the uncertainty of coalmine combustion. Restrictions of the single detection method will also affect the detection precision in the early time of spontaneous combustion. Although multiple detection methods can be adopted as a complementarity to improve the accuracy of detection, the synthesized method will in- crease the complicacy of criterion, making it difficult to estimate the combustion. To solve this problem, a fuzzy inference system based on CRI （Compositional Rule of Inference） and fuzzy reasoning method FITA （First Infer Then Aggregate） are presented. And the neural network is also developed to realize the fuzzy inference system. Finally, the effectiveness of the inference system is demonstrated bv means of an experiment.展开更多
This paper mainly describes that loose of jig bed affects jig's separation effect, and the corresponding fuzzy rules were built. Using the evaluating index of jig's separation effect--imperfection (I) and tota...This paper mainly describes that loose of jig bed affects jig's separation effect, and the corresponding fuzzy rules were built. Using the evaluating index of jig's separation effect--imperfection (I) and total misplaced material (Cz), it evaluates status of loose of jig bed by fuzzy inference system. Experimental simulation and applications in practice prove the method's feasibility.展开更多
Estimation of tunnel diameter convergence is a very important issue for tunneling construction,especially when the new Austrian tunneling method（NATM） is adopted.For this purpose,a systematic convergence measurement...Estimation of tunnel diameter convergence is a very important issue for tunneling construction,especially when the new Austrian tunneling method（NATM） is adopted.For this purpose,a systematic convergence measurement is usually implemented to adjust the design during the whole construction,and consequently deadly hazards can be prevented.In this study,a new fuzzy model capable of predicting the diameter convergences of a high-speed railway tunnel was developed on the basis of adaptive neuro-fuzzy inference system（ANFIS） approach.The proposed model used more than 1 000 datasets collected from two different tunnels,i.e.Daguan tunnel No.2 and Yaojia tunnel No.1,which are part of a tunnel located in Hunan Province,China.Six Takagi-Sugeno fuzzy inference systems were constructed by using subtractive clustering method.The data obtained from Daguan tunnel No.2 were used for model training,while the data from Yaojia tunnel No.1 were employed to evaluate the performance of the model.The input parameters include surrounding rock masses（SRM） rating index,ground engineering conditions（GEC） rating index,tunnel overburden（H）,rock density（？）,distance between monitoring station and working face（D）,and elapsed time（T）.The model’s performance was assessed by the variance account for（VAF）,root mean square error（RMSE）,mean absolute percentage error（MAPE） as well as the coefficient of determination（R2） between measured and predicted data as recommended by many researchers.The results showed excellent prediction accuracy and it was suggested that the proposed model can be used to estimate the tunnel convergence and convergence velocity.展开更多
Increases in the treatment of water to meet the growing water demand ultimately result in unmanageable quantities of residuals,the handling,and disposal of which is a major environmental issue.Consequently,research in...Increases in the treatment of water to meet the growing water demand ultimately result in unmanageable quantities of residuals,the handling,and disposal of which is a major environmental issue.Consequently,research into beneficial reuse of water treatment residuals continues unabated.This study investigated the applicability of lime-iron sludge for phosphate adsorption by fixed-bed column adsorption.Laboratory-scale experiments were conducted at varying flow rates and bed depths.Fundamental and empirical models(Thomas,Yan,Bohart-Adams,Yoon-Nelson,and Wolboroska)as well as artificial intelligence techniques(Artificial neural network(ANN)and Adaptive neuro-fuzzy inference system(ANFIS))were used to simulate experimental breakthrough curves and predict column dynamics.Increase in flow rate resulted in reduced adsorption capacity.However,adsorption capacity was not affected by bed depth.ANN was superior in predicting breakthrough curves and predicted breakthrough times with high accuracy(R^2>0.9962).Na OH(0.5 mol·L^-1)was successfully used to regenerate the adsorption bed.After nine cyclic adsorption/desorption runs,only a marginal decrease in adsorption and desorption efficiencies of 10%and 8%respectively was observed.The same regenerate Na OH solution was reused for all desorption cycles.After nine cycles the eluent desorbed a total of 1550 mg phosphate exhibiting potential for further reuse.展开更多
One of the important geotechnical parameters required for designing of the civil engineering structure is the compressibility of the soil.In this study,the main purpose is to develop a novel hybrid Machine Learning(ML...One of the important geotechnical parameters required for designing of the civil engineering structure is the compressibility of the soil.In this study,the main purpose is to develop a novel hybrid Machine Learning(ML)model(ANFIS-DE),which used Differential Evolution(DE)algorithm to optimize the predictive capability of Adaptive-Network-based Fuzzy Inference System(ANFIS),for estimating soil Compression coefficient(Cc)from other geotechnical parameters namelyWater Content,Void Ratio,SpecificGravity,Liquid Limit,Plastic Limit,Clay content and Depth of Soil Samples.Validation of the predictive capability of the novel model was carried out using statistical indices:Root Mean Square Error(RMSE),Mean Absolute Error(MAE),and Correlation Coefficient(R).In addition,two popular ML models namely Reduced Error Pruning Trees(REPTree)and Decision Stump(Dstump)were used for comparison.Results showed that the performance of the novel model ANFIS-DE is the best(R=0.825,MAE=0.064 and RMSE=0.094)in comparison to other models such as REPTree(R=0.7802,MAE=0.068 and RMSE=0.0988)andDstump(R=0.7325,MAE=0.0785 and RMSE=0.1036).Therefore,the ANFIS-DE model can be used as a promising tool for the correct and quick estimation of the soil Cc,which can be employed in the design and construction of civil engineering structures.展开更多
ESystems based on EHRs(Electronic health records)have been in use for many years and their amplified realizations have been felt recently.They still have been pioneering collections of massive volumes of health data.D...ESystems based on EHRs(Electronic health records)have been in use for many years and their amplified realizations have been felt recently.They still have been pioneering collections of massive volumes of health data.Duplicate detections involve discovering records referring to the same practical components,indicating tasks,which are generally dependent on several input parameters that experts yield.Record linkage specifies the issue of finding identical records across various data sources.The similarity existing between two records is characterized based on domain-based similarity functions over different features.De-duplication of one dataset or the linkage of multiple data sets has become a highly significant operation in the data processing stages of different data mining programmes.The objective is to match all the records associated with the same entity.Various measures have been in use for representing the quality and complexity about data linkage algorithms,and many other novel metrics have been introduced.An outline of the problem existing in themeasurement of data linkage and de-duplication quality and complexity is presented.This article focuses on the reprocessing of health data that is horizontally divided among data custodians,with the purpose of custodians giving similar features to sets of patients.The first step in this technique is about an automatic selection of training examples with superior quality from the compared record pairs and the second step involves training the reciprocal neuro-fuzzy inference system(RANFIS)classifier.Using the Optimal Threshold classifier,it is presumed that there is information about the original match status for all compared record pairs(i.e.,Ant Lion Optimization),and therefore an optimal threshold can be computed based on the respective RANFIS.Febrl,Clinical Decision(CD),and Cork Open Research Archive(CORA)data repository help analyze the proposed method with evaluated benchmarks with current techniques.展开更多
It has been shown in recent economic and statistical studies that combining forecasts may produce more accurate forecasts than individual ones. However, the literature on combining forecasts has almost exclusively foc...It has been shown in recent economic and statistical studies that combining forecasts may produce more accurate forecasts than individual ones. However, the literature on combining forecasts has almost exclusively focused on linear combining forecasts. In this paper, a new nonlinear combination forecasting method based on fuzzy inference system is present to overcome the difficulties and drawbacks in linear combination modeling of non-stationary time series. Furthermore, the optimization algorithm based on a hierarchical structure of learning automata is used to identify the parameters of the fuzzy system. Experiment results related to numerical examples demonstrate that the new technique has excellent identification performances and forecasting accuracy superior to other existing linear combining forecasts.展开更多
Spectral unmixing helps to identify different components present in the spectral mixtures which occur in the uppermost layer of the area owing to the low spatial resolution of hyperspectral images.Most spectral unmixi...Spectral unmixing helps to identify different components present in the spectral mixtures which occur in the uppermost layer of the area owing to the low spatial resolution of hyperspectral images.Most spectral unmixing methods are globally based and do not consider the spectral variability among its endmembers that occur due to illumination,atmospheric,and environmental conditions.Here,endmember bundle extraction plays a major role in overcoming the above-mentioned limitations leading to more accurate abundance fractions.Accordingly,a two-stage approach is proposed to extract endmembers through endmember bundles in hyperspectral images.The divide and conquer method is applied as the first step in subset images with only the non-redundant bands to extract endmembers using the Vertex Component Analysis(VCA)and N-FINDR algorithms.A fuzzy rule-based inference system utilizing spectral matching parameters is proposed in the second step to categorize endmembers.The endmember with the minimum error is chosen as the final endmember in each specific category.The proposed method is simple and automatically considers endmember variability in hyperspectral images.The efficiency of the proposed method is evaluated using two real hyperspectral datasets.The average spectral angle and abundance angle are used to analyze the performance measures.展开更多
The design and analysis of a fractional order proportional integral deri-vate(FOPID)controller integrated with an adaptive neuro-fuzzy inference system(ANFIS)is proposed in this study.Afirst order plus delay time plant...The design and analysis of a fractional order proportional integral deri-vate(FOPID)controller integrated with an adaptive neuro-fuzzy inference system(ANFIS)is proposed in this study.Afirst order plus delay time plant model has been used to validate the ANFIS combined FOPID control scheme.In the pro-posed adaptive control structure,the intelligent ANFIS was designed such that it will dynamically adjust the fractional order factors(λandµ)of the FOPID(also known as PIλDµ)controller to achieve better control performance.When the plant experiences uncertainties like external load disturbances or sudden changes in the input parameters,the stability and robustness of the system can be achieved effec-tively with the proposed control scheme.Also,a modified structure of the FOPID controller has been used in the present system to enhance the dynamic perfor-mance of the controller.An extensive MATLAB software simulation study was made to verify the usefulness of the proposed control scheme.The study has been carried out under different operating conditions such as external disturbances and sudden changes in input parameters.The results obtained using the ANFIS-FOPID control scheme are also compared to the classical fractional order PIλDµand conventional PID control schemes to validate the advantages of the control-lers.The simulation results confirm the effectiveness of the ANFIS combined FOPID controller for the chosen plant model.Also,the proposed control scheme outperformed traditional control methods in various performance metrics such as rise time,settling time and error criteria.展开更多
文摘Robustness against measurement uncertainties is crucial for gas turbine engine diagnosis.While current research focuses mainly on measurement noise,measurement bias remains challenging.This study proposes a novel performance-based fault detection and identification(FDI)strategy for twin-shaft turbofan gas turbine engines and addresses these uncertainties through a first-order Takagi-Sugeno-Kang fuzzy inference system.To handle ambient condition changes,we use parameter correction to preprocess the raw measurement data,which reduces the FDI’s system complexity.Additionally,the power-level angle is set as a scheduling parameter to reduce the number of rules in the TSK-based FDI system.The data for designing,training,and testing the proposed FDI strategy are generated using a component-level turbofan engine model.The antecedent and consequent parameters of the TSK-based FDI system are optimized using the particle swarm optimization algorithm and ridge regression.A robust structure combining a specialized fuzzy inference system with the TSK-based FDI system is proposed to handle measurement biases.The performance of the first-order TSK-based FDI system and robust FDI structure are evaluated through comprehensive simulation studies.Comparative studies confirm the superior accuracy of the first-order TSK-based FDI system in fault detection,isolation,and identification.The robust structure demonstrates a 2%-8%improvement in the success rate index under relatively large measurement bias conditions,thereby indicating excellent robustness.Accuracy against significant bias values and computation time are also evaluated,suggesting that the proposed robust structure has desirable online performance.This study proposes a novel FDI strategy that effectively addresses measurement uncertainties.
文摘Published proof test coverage(PTC)estimates for emergency shutdown valves(ESDVs)show only moderate agreement and are predominantly opinion-based.A Failure Modes,Effects,and Diagnostics Analysis(FMEDA)was undertaken using component failure rate data to predict PTC for a full stroke test and a partial stroke test.Given the subjective and uncertain aspects of the FMEDA approach,specifically the selection of component failure rates and the determination of the probability of detecting failure modes,a Fuzzy Inference System(FIS)was proposed to manage the data,addressing the inherent uncertainties.Fuzzy inference systems have been used previously for various FMEA type assessments,but this is the first time an FIS has been employed for use with FMEDA.ESDV PTC values were generated from both the standard FMEDA and the fuzzy-FMEDA approaches using data provided by FMEDA experts.This work demonstrates that fuzzy inference systems can address the subjectivity inherent in FMEDA data,enabling reliable estimates of ESDV proof test coverage for both full and partial stroke tests.This facilitates optimized maintenance planning while ensuring safety is not compromised.
文摘In recent years,the world has seen an exponential increase in energy demand,prompting scientists to look for innovative ways to exploit the power sun’s power.Solar energy technologies use the sun’s energy and light to provide heating,lighting,hot water,electricity and even cooling for homes,businesses,and industries.Therefore,ground-level solar radiation data is important for these applications.Thus,our work aims to use a mathematical modeling tool to predict solar irradiation.For this purpose,we are interested in the application of the Adaptive Neuro Fuzzy Inference System.Through this type of artificial neural system,10 models were developed,based on meteorological data such as the Day number(Nj),Ambient temperature(T),Relative Humidity(Hr),Wind speed(WS),Wind direction(WD),Declination(δ),Irradiation outside the atmosphere(Goh),Maximum temperature(Tmax),Minimum temperature(Tmin).These models have been tested by different static indicators to choose the most suitable one for the estimation of the daily global solar radiation.This study led us to choose the M8 model,which takes Nj,T,Hr,δ,Ws,Wd,G0,and S0 as input variables because it presents the best performance either in the learning phase(R^(2)=0.981,RMSE=0.107 kW/m^(2),MAE=0.089 kW/m2)or in the validation phase(R^(2)=0.979,RMSE=0.117 kW/m^(2),MAE=0.101 kW/m^(2)).
基金supported by National Natural Science Foundation of China(Grant No.50835001)Research and Innovation Teams Foundation Project of Ministry of Education of China(Grant No.IRT0610)Liaoning Provincial Key Laboratory Foundation Project of China(Grant No.20060132)
文摘Synthesis characteristics of the electro-hydraulic servo valve are key factors to determine eligibility of the hydraulic production.Testing all synthesis characteristics of the electro-hydraulic servo valve after assembling leads to high repair rate and reject rate,so accurate prediction for the synthesis characteristics in the industrial production is particular important in decreasing the repair rate and the reject rate of the product.However,the research in forecasting synthesis characteristics of the electro-hydraulic servo valve is rare.In this work,a hybrid prediction method was proposed based on rough set(RS)and adaptive neuro-fuzzy inference system(ANFIS)in order to predict synthesis characteristics of electro-hydraulic servo valve.Since the geometric factors affecting the synthesis characteristics of the electro-hydraulic servo valve are from workers'experience,the inputs of the prediction method are uncertain.RS-based attributes reduction was used as the preprocessor,and then the exact geometric factors affecting the synthesis characteristics of the electro-hydraulic servo valve were obtained.On the basis of the exact geometric factors,ANFIS was used to build the final prediction model.A typical electro-hydraulic servo valve production was used to demonstrate the proposed prediction method.The prediction results showed that the proposed prediction method was more applicable than the artificial neural networks(ANN)in predicting the synthesis characteristics of electro-hydraulic servo valve,and the proposed prediction method was a powerful tool to predict synthesis characteristics of the electro-hydraulic servo valve.Moreover,with the use of the advantages of RS and ANFIS,the highly effective forecasting framework in this study can also be applied to other problems involving synthesis characteristics forecasting.
基金supported by the National Natural Science Foundation of China(No. 50778009)
文摘An adaptive neuro fuzzy inference system was used for classifying water quality status of river. It applied several physical and inorganic chemical indicators including dissolved oxygen, chemical oxygen demand, and ammonia-nitrogen. A data set （nine weeks, total 845 observations） was collected from 100 monitoring stations in all major river basins in China and used for training and validating the model. Up to 89.59% of the data could be correctly classified using this model. Such performance was more competitive when compared with artificial neural networks. It is applicable in evaluation and classification of water quality status.
基金The National Natural Science Foundation of China under contract No.51379002the Fundamental Research Funds for the Central Universities of China under contract Nos 3132016322 and 3132016314the Applied Basic Research Project Fund of the Chinese Ministry of Transport of China under contract No.2014329225010
文摘An efficient and accurate prediction of a precise tidal level in estuaries and coastal areas is indispensable for the management and decision-making of human activity in the field wok of marine engineering. The variation of the tidal level is a time-varying process. The time-varying factors including interference from the external environment that cause the change of tides are fairly complicated. Furthermore, tidal variations are affected not only by periodic movement of celestial bodies but also by time-varying interference from the external environment. Consequently, for the efficient and precise tidal level prediction, a neuro-fuzzy hybrid technology based on the combination of harmonic analysis and adaptive network-based fuzzy inference system（ANFIS）model is utilized to construct a precise tidal level prediction system, which takes both advantages of the harmonic analysis method and the ANFIS network. The proposed prediction model is composed of two modules： the astronomical tide module caused by celestial bodies’ movement and the non-astronomical tide module caused by various meteorological and other environmental factors. To generate a fuzzy inference system（FIS） structure,three approaches which include grid partition（GP）, fuzzy c-means（FCM） and sub-clustering（SC） are used in the ANFIS network constructing process. Furthermore, to obtain the optimal ANFIS based prediction model, large numbers of simulation experiments are implemented for each FIS generating approach. In this tidal prediction study, the optimal ANFIS model is used to predict the non-astronomical tide module, while the conventional harmonic analysis model is used to predict the astronomical tide module. The final prediction result is performed by combining the estimation outputs of the harmonious analysis model and the optimal ANFIS model. To demonstrate the applicability and capability of the proposed novel prediction model, measured tidal level samples of Fort Pulaski tidal station are selected as the testing database. Simulation and experimental results confirm that the proposed prediction approach can achieve precise predictions for the tidal level with high accuracy, satisfactory convergence and stability.
文摘This paper deals with the estimation of crest settlement in a concrete face rockfill dam （CFRD）, utilizing intelligent methods. Following completion of dam construction, considerable movements of the crest and the body of the dam can develop during the first impoundment of the reservoir. Although there is vast experience worldwide in CFRD design and construction, few accurate experimental relationships are available to predict the settlement in CFRD. The goal is to advance the development of intelligent methods to estimate the subsidence of dams at the design stage. Due to dam zonifieation and uncertainties in material properties, these methods appear to be the appropriate choice. In this study, the crest settlement behavior of CFRDs is analyzed based on compiled data of 24 CFRDs constructed during recent years around the world, along with the utilization of gene ex- pression programming （GEP） and adaptive neuro-fuzzy inference system （ANFIS） methods. In addition, dam height （H）, shape factor （St）, and time （t, time after first operation） are also assessed, being considered major factors in predicting the settlement behavior. From the relationships proposed, the values ofR2 for both equations of GEP （with and without constant） were 0.9603 and 0.9734, and for the three approaches of ANFIS （grid partitioning （GP）, subtractive clustering method （SCM）, and fuzzy c-means clustering （FCM）） were 0.9693, 0.8657, and 0.8848, respectively. The obtained results indicate that the overall behavior evaluated by this approach is consistent with the measured data of other CFRDs.
文摘Composition estimation plays very important role in plant operation and control.Extended Kalman filter(EKF) is one of the most common estimators,which has been used in composition estimation of reactive batch distillation,but its performance is heavily dependent on the thermodynamic modeling of vapor-liquid equilibrium,which is difficult to initialize and tune.In this paper an inferential state estimation scheme based on adaptive neuro-fuzzy inference system(ANFIS) ,which is a model base estimator,is employed for composition estimation by using temperature measurements in multicomponent reactive batch distillation.The state estimator is supported by data from a complete dynamic model that includes component and energy balance equations accompanied with thermodynamic relations and reaction kinetics.The mathematical model is verified by pilot plant data.The simulation results show that the ANFIS estimator provides reliable and accurate estimation for component concentrations in reactive batch distillation.The estimated states form a basis for improving the performance of reactive batch distillation either through decision making of an operator or through an automatic closed-loop control scheme.
基金Supported by the National Key Basic Research and Development Program of China (2009CB320602)the National Natural Science Foundation of China (60834004, 61025018)+2 种基金the Open Project Program of the State Key Lab of Industrial ControlTechnology (ICT1108)the Open Project Program of the State Key Lab of CAD & CG (A1120)the Foundation of Key Laboratory of System Control and Information Processing (SCIP2011005),Ministry of Education,China
文摘Semiconductor manufacturing (SM) system is one of the most complicated hybrid processes involved continuously variable dynamical systems and discrete event dynamical systems. The optimization and scheduling of semiconductor fabrication has long been a hot research direction in automation. Bottleneck is the key factor to a SM system, which seriously influences the throughput rate, cycle time, time-delivery rate, etc. Efficient prediction for the bottleneck of a SM system provides the best support for the consequent scheduling. Because categorical data (product types, releasing strategies) and numerical data (work in process, processing time, utilization rate, buffer length, etc.) have significant effect on bottleneck, an improved adaptive network-based fuzzy inference system (ANFIS) was adopted in this study to predict bottleneck since conventional neural network-based methods accommodate only numerical inputs. In this improved ANFIS, the contribution of categorical inputs to firing strength is reflected through a transformation matrix. In order to tackle high-dimensional inputs, reduce the number of fuzzy rules and obtain high prediction accuracy, a fuzzy c-means method combining binary tree linear division method was applied to identify the initial structure of fuzzy inference system. According to the experimental results, the main-bottleneck and sub-bottleneck of SM system can be predicted accurately with the proposed method.
基金Projects(51108165, 51178170) supported by the National Natural Science Foundation of China
文摘An adaptive neuro-fuzzy inference system(ANFIS) for predicting the performance of a reversibly used cooling tower(RUCT) under cross flow conditions as part of a heat pump system for a heating mode in winter was demonstrated.Extensive field experimental work was carried out in order to gather enough data for training and prediction.The statistical methods,such as the correlation coefficient,absolute fraction of variance and root mean square error,were given to compare the predicted and actual values for model validation.The simulation results predicted with the ANFIS can be used to simulate the performance of a reversibly used cooling tower quite accurately.Therefore,the ANFIS approach can reliably be used for forecasting the performance of RUCT.
文摘Automatic diagnosis tool helps physicians to evaluate capsule endoscopic examinations faster and more accurate.The purpose of this study was to evaluate the validity and reliability of an automatic post-processing method for identifying and classifying wireless capsule endoscopic images, and investigate statistical measures to differentiate normal and abnormal images. The proposed technique consists of two main stages, namely, feature extraction and classification. Primarily, 32 features incorporating four statistical measures(contrast, correlation, homogeneity and energy) calculated from co-occurrence metrics were computed. Then, mutual information was used to select features with maximal dependence on the target class and with minimal redundancy between features. Finally, a trained classifier, adaptive neuro-fuzzy interface system was implemented to classify endoscopic images into tumor, healthy and unhealthy classes. Classification accuracy of 94.2% was obtained using the proposed pipeline. Such techniques are valuable for accurate detection characterization and interpretation of endoscopic images.
基金Project 20050290010 supported by the Doctoral Foundation of Chinese Education Ministry and 2005AA133070 by National 863 Program for High Technique Research Development
文摘The spontaneous combustion is a smoldering process and characterized by a slow burning speed and a long duration. Therefore, it is a hazard to coal mines. Early detection of coal mine spontaneous combustion is quite difficult because of the complexity of different coal mines. And the traditional threshold discriminance is not suitable for spontaneous combustion detection due to the uncertainty of coalmine combustion. Restrictions of the single detection method will also affect the detection precision in the early time of spontaneous combustion. Although multiple detection methods can be adopted as a complementarity to improve the accuracy of detection, the synthesized method will in- crease the complicacy of criterion, making it difficult to estimate the combustion. To solve this problem, a fuzzy inference system based on CRI （Compositional Rule of Inference） and fuzzy reasoning method FITA （First Infer Then Aggregate） are presented. And the neural network is also developed to realize the fuzzy inference system. Finally, the effectiveness of the inference system is demonstrated bv means of an experiment.
文摘This paper mainly describes that loose of jig bed affects jig's separation effect, and the corresponding fuzzy rules were built. Using the evaluating index of jig's separation effect--imperfection (I) and total misplaced material (Cz), it evaluates status of loose of jig bed by fuzzy inference system. Experimental simulation and applications in practice prove the method's feasibility.
基金support of China University of Geosciences (Wuhan)
文摘Estimation of tunnel diameter convergence is a very important issue for tunneling construction,especially when the new Austrian tunneling method（NATM） is adopted.For this purpose,a systematic convergence measurement is usually implemented to adjust the design during the whole construction,and consequently deadly hazards can be prevented.In this study,a new fuzzy model capable of predicting the diameter convergences of a high-speed railway tunnel was developed on the basis of adaptive neuro-fuzzy inference system（ANFIS） approach.The proposed model used more than 1 000 datasets collected from two different tunnels,i.e.Daguan tunnel No.2 and Yaojia tunnel No.1,which are part of a tunnel located in Hunan Province,China.Six Takagi-Sugeno fuzzy inference systems were constructed by using subtractive clustering method.The data obtained from Daguan tunnel No.2 were used for model training,while the data from Yaojia tunnel No.1 were employed to evaluate the performance of the model.The input parameters include surrounding rock masses（SRM） rating index,ground engineering conditions（GEC） rating index,tunnel overburden（H）,rock density（？）,distance between monitoring station and working face（D）,and elapsed time（T）.The model’s performance was assessed by the variance account for（VAF）,root mean square error（RMSE）,mean absolute percentage error（MAPE） as well as the coefficient of determination（R2） between measured and predicted data as recommended by many researchers.The results showed excellent prediction accuracy and it was suggested that the proposed model can be used to estimate the tunnel convergence and convergence velocity.
文摘Increases in the treatment of water to meet the growing water demand ultimately result in unmanageable quantities of residuals,the handling,and disposal of which is a major environmental issue.Consequently,research into beneficial reuse of water treatment residuals continues unabated.This study investigated the applicability of lime-iron sludge for phosphate adsorption by fixed-bed column adsorption.Laboratory-scale experiments were conducted at varying flow rates and bed depths.Fundamental and empirical models(Thomas,Yan,Bohart-Adams,Yoon-Nelson,and Wolboroska)as well as artificial intelligence techniques(Artificial neural network(ANN)and Adaptive neuro-fuzzy inference system(ANFIS))were used to simulate experimental breakthrough curves and predict column dynamics.Increase in flow rate resulted in reduced adsorption capacity.However,adsorption capacity was not affected by bed depth.ANN was superior in predicting breakthrough curves and predicted breakthrough times with high accuracy(R^2>0.9962).Na OH(0.5 mol·L^-1)was successfully used to regenerate the adsorption bed.After nine cyclic adsorption/desorption runs,only a marginal decrease in adsorption and desorption efficiencies of 10%and 8%respectively was observed.The same regenerate Na OH solution was reused for all desorption cycles.After nine cycles the eluent desorbed a total of 1550 mg phosphate exhibiting potential for further reuse.
基金Ministry of Education and Training of Vietnam,Grant No.B2020-GHA-03the University of Transport and Communications,Hanoi,Vietnam.
文摘One of the important geotechnical parameters required for designing of the civil engineering structure is the compressibility of the soil.In this study,the main purpose is to develop a novel hybrid Machine Learning(ML)model(ANFIS-DE),which used Differential Evolution(DE)algorithm to optimize the predictive capability of Adaptive-Network-based Fuzzy Inference System(ANFIS),for estimating soil Compression coefficient(Cc)from other geotechnical parameters namelyWater Content,Void Ratio,SpecificGravity,Liquid Limit,Plastic Limit,Clay content and Depth of Soil Samples.Validation of the predictive capability of the novel model was carried out using statistical indices:Root Mean Square Error(RMSE),Mean Absolute Error(MAE),and Correlation Coefficient(R).In addition,two popular ML models namely Reduced Error Pruning Trees(REPTree)and Decision Stump(Dstump)were used for comparison.Results showed that the performance of the novel model ANFIS-DE is the best(R=0.825,MAE=0.064 and RMSE=0.094)in comparison to other models such as REPTree(R=0.7802,MAE=0.068 and RMSE=0.0988)andDstump(R=0.7325,MAE=0.0785 and RMSE=0.1036).Therefore,the ANFIS-DE model can be used as a promising tool for the correct and quick estimation of the soil Cc,which can be employed in the design and construction of civil engineering structures.
基金This research project was funded by Princess Nourah bint Abdulrahman University Researchers Supporting Project Number(PNURSP2022R234),Princess Nourah bint Abdulrahman University,Riyadh,Saudi Arabia.
文摘ESystems based on EHRs(Electronic health records)have been in use for many years and their amplified realizations have been felt recently.They still have been pioneering collections of massive volumes of health data.Duplicate detections involve discovering records referring to the same practical components,indicating tasks,which are generally dependent on several input parameters that experts yield.Record linkage specifies the issue of finding identical records across various data sources.The similarity existing between two records is characterized based on domain-based similarity functions over different features.De-duplication of one dataset or the linkage of multiple data sets has become a highly significant operation in the data processing stages of different data mining programmes.The objective is to match all the records associated with the same entity.Various measures have been in use for representing the quality and complexity about data linkage algorithms,and many other novel metrics have been introduced.An outline of the problem existing in themeasurement of data linkage and de-duplication quality and complexity is presented.This article focuses on the reprocessing of health data that is horizontally divided among data custodians,with the purpose of custodians giving similar features to sets of patients.The first step in this technique is about an automatic selection of training examples with superior quality from the compared record pairs and the second step involves training the reciprocal neuro-fuzzy inference system(RANFIS)classifier.Using the Optimal Threshold classifier,it is presumed that there is information about the original match status for all compared record pairs(i.e.,Ant Lion Optimization),and therefore an optimal threshold can be computed based on the respective RANFIS.Febrl,Clinical Decision(CD),and Cork Open Research Archive(CORA)data repository help analyze the proposed method with evaluated benchmarks with current techniques.
基金Funded by the Excellent Young Teachers of MOE (350) and Chongqing Education Committee Foundation
文摘It has been shown in recent economic and statistical studies that combining forecasts may produce more accurate forecasts than individual ones. However, the literature on combining forecasts has almost exclusively focused on linear combining forecasts. In this paper, a new nonlinear combination forecasting method based on fuzzy inference system is present to overcome the difficulties and drawbacks in linear combination modeling of non-stationary time series. Furthermore, the optimization algorithm based on a hierarchical structure of learning automata is used to identify the parameters of the fuzzy system. Experiment results related to numerical examples demonstrate that the new technique has excellent identification performances and forecasting accuracy superior to other existing linear combining forecasts.
文摘Spectral unmixing helps to identify different components present in the spectral mixtures which occur in the uppermost layer of the area owing to the low spatial resolution of hyperspectral images.Most spectral unmixing methods are globally based and do not consider the spectral variability among its endmembers that occur due to illumination,atmospheric,and environmental conditions.Here,endmember bundle extraction plays a major role in overcoming the above-mentioned limitations leading to more accurate abundance fractions.Accordingly,a two-stage approach is proposed to extract endmembers through endmember bundles in hyperspectral images.The divide and conquer method is applied as the first step in subset images with only the non-redundant bands to extract endmembers using the Vertex Component Analysis(VCA)and N-FINDR algorithms.A fuzzy rule-based inference system utilizing spectral matching parameters is proposed in the second step to categorize endmembers.The endmember with the minimum error is chosen as the final endmember in each specific category.The proposed method is simple and automatically considers endmember variability in hyperspectral images.The efficiency of the proposed method is evaluated using two real hyperspectral datasets.The average spectral angle and abundance angle are used to analyze the performance measures.
基金The author extends their appreciation to the Deputyship for Research&Innovation,Ministry of Education in Saudi Arabia for funding this research work through the project number(IFPSAU-2021/01/18128).
文摘The design and analysis of a fractional order proportional integral deri-vate(FOPID)controller integrated with an adaptive neuro-fuzzy inference system(ANFIS)is proposed in this study.Afirst order plus delay time plant model has been used to validate the ANFIS combined FOPID control scheme.In the pro-posed adaptive control structure,the intelligent ANFIS was designed such that it will dynamically adjust the fractional order factors(λandµ)of the FOPID(also known as PIλDµ)controller to achieve better control performance.When the plant experiences uncertainties like external load disturbances or sudden changes in the input parameters,the stability and robustness of the system can be achieved effec-tively with the proposed control scheme.Also,a modified structure of the FOPID controller has been used in the present system to enhance the dynamic perfor-mance of the controller.An extensive MATLAB software simulation study was made to verify the usefulness of the proposed control scheme.The study has been carried out under different operating conditions such as external disturbances and sudden changes in input parameters.The results obtained using the ANFIS-FOPID control scheme are also compared to the classical fractional order PIλDµand conventional PID control schemes to validate the advantages of the control-lers.The simulation results confirm the effectiveness of the ANFIS combined FOPID controller for the chosen plant model.Also,the proposed control scheme outperformed traditional control methods in various performance metrics such as rise time,settling time and error criteria.
