The in-plane tensile behaviors of bi-axial warp-knitted(BWK) composites under quasi-static and high strain rates loading were experimentally analyzed in this article. The tensile tests were conducted along warp direct...The in-plane tensile behaviors of bi-axial warp-knitted(BWK) composites under quasi-static and high strain rates loading were experimentally analyzed in this article. The tensile tests were conducted along warp direction( 0°) and weft direction( 90°) at quasi-static rate of 0. 001 s^(-1) and high strain rates ranging from 1 450 to 2 540 s^(-1),respectively. It is found that the significant strain rate sensitivity can be observed in the stress-strain curves of BWK composites. The fracture morphologies of BWK composites demonstrate that the tensile failure modes are shear failure and fiber breakage under the quasi-static testing condition while interface failure and fibers pullout are at high strain rates.展开更多
Fieldwork along several segments of the Altyn Tagh Fault,between 85 and 95°E,confirms that it ranks as one of the most active faults of Asia.In the East,near Aksay,the active fault trace offsets numerous stream c...Fieldwork along several segments of the Altyn Tagh Fault,between 85 and 95°E,confirms that it ranks as one of the most active faults of Asia.In the East,near Aksay,the active fault trace offsets numerous stream channels,terrace risers and fans tens to hundreds of meters. 14 C dating of organic remains and charcoal within terrace gravels indicates that most of the terraces were emplaced after the beginning of the Holocene,implying a left\|slip rate of about 2cm/a.Large mole tracks attest to the occurrence of great earthquakes.Even larger mole tracks are found north of Lenghu,within the Altun Shan push\|up,a 6000 m high range in a restraining bend of the fault,now sliced by its most active strand.North of Huatougou,at the transition between another push\|up mountain and a recent pull\|apart basin,a spectacular sequence of five flat\|floored,hanging channels,beheaded by the fault from a unique source in the mountain,have been horizontally displaced by up to 1250m.Cosmogenic dating of the abandonment of these channels and of nearby offset terrace risers confirms the slip\|rate at Aksay.Several km to the west,pressure ridges exceeding 10m in height across a large young fan,imply the repeat of several great earthquakes in a relatively short time span.展开更多
Strip-like Fe Co films were patterned by a traditional lithograph process from intrinsically isotropic continuous Fe Co films. The strip-patterned Fe Co film shows a strong in-plane uniaxial magnetic anisotropy with e...Strip-like Fe Co films were patterned by a traditional lithograph process from intrinsically isotropic continuous Fe Co films. The strip-patterned Fe Co film shows a strong in-plane uniaxial magnetic anisotropy with easy axis along the length direction of the strip. The angular dependences of remanence ratio, switching field, and coercivity indicate that the magnetization reversal mechanism of the strip-patterned Fe Co film is coherent rotation and domain wall depinning when the applied field is near the hard axis and easy axis, respectively. The consistency of the experimental hysteresis loops of the strip-patterned Fe Co film and calculated hysteresis loops with a simple in-plane uniaxial anisotropy model indicates that the strip-patterned Fe Co film behaves as a single domain. The absence of the domain wall and the strong in-plane anisotropy field make the strip-patterned Fe Co films have much potential for high-frequency application.展开更多
Structural Health Monitoring(SHM) suggests the use of machine learning algorithms with the aim of understanding specific behaviors in a structural system. This work introduces a pattern recognition methodology for ope...Structural Health Monitoring(SHM) suggests the use of machine learning algorithms with the aim of understanding specific behaviors in a structural system. This work introduces a pattern recognition methodology for operational condition clustering in a structure sample using the well known Density Based Spatial Clustering of Applications with Noise(DBSCAN) algorithm.The methodology was validated using a data set from an experiment with 32 Fiber Bragg Gratings bonded to an aluminum beam placed in cantilever and submitted to cyclic bending loads under 13 different operational conditions(pitch angles). Further, the computational cost and precision of the machine learning pipeline called FA + GA-DBSCAN(which employs a combination of machine learning techniques including factor analysis for dimensionality reduction and a genetic algorithm for the automatic selection of initial parameters of DBSCAN) was measured. The obtained results have shown a good performance, detecting 12 of 13 operational conditions, with an overall precision over 90%.展开更多
This paper presents a fringe-carrier method that eliminates sign ambiguity of transient moire fringes which can be used to automatically determine the relative orders. A fringe carrier is preset in the static state of...This paper presents a fringe-carrier method that eliminates sign ambiguity of transient moire fringes which can be used to automatically determine the relative orders. A fringe carrier is preset in the static state of the specimen and the dynamic in-plane displacements are recorded as the modulation to the frequency of the carrier fringes when the specimen is loaded by impact. According to a modulating criterion developed from the modulation degree, the fringes of the transient moire patterns keep monotonical in orders so that they can be automatically encoded in grey levels by a digital image system. The moire orders purely caused by dynamic loadings are evaluated by subtracting the grey-value of the unmodulated carrier image from that of the modulated carrier images encoded by their orders. With the subtracted moire orders the strain components can be obtained, and, correspondingly, the histograms of dynamic displacement moire images are shown with order variation by image-difference.展开更多
The static test of 13 square hollow section(SHS) X-joints with different β and different types of plate reinforcement under in-plane moment in brace was carried out. Experimental test schemes, failure modes of specim...The static test of 13 square hollow section(SHS) X-joints with different β and different types of plate reinforcement under in-plane moment in brace was carried out. Experimental test schemes, failure modes of specimens, moment-vertical displacement curves, moment-deformation of the chord, and strain strength distribution curves were presented. The effect of β and plate reinforcement types on in-plane flexural property of SHS X-joints was studied. Results show that punching shear of chord face disappears, brace material fracture appears and concave and convex deformation of chord decrease when either collar plates or doubler plates were welded on chord face. Moment-vertical displacement curves of all specimens have obvious elastic, elastic-plastic and plastic stages. As β increases, the in-plane flexural ultimate capacity and initial stiffness of joints of the same plate reinforcement type increase, but ductility of joints decreases. With the same β, the in-plane flexural initial stiffness and ultimate capacity of doubler plate reinforced joints, collar plate reinforced joints, and unreinforced joints decrease progressively. Thickness of reinforcement plate has no obvious effect on in-plane flexural initial stiffness and ultimate capacity of joints. As thickness of reinforcement plate increases, the ductility of reinforced X-joints decreases. The concave and convex deformation of every specimen has good symmetry;as β increases, the yield and ultimate deformation of chord decrease.展开更多
Making use of the method of obtaining regional vertical strain rate from regional preciseleveling data and gaining dynamic pattern combining with deformation data on spanningfaults, the regional vertical strain dynami...Making use of the method of obtaining regional vertical strain rate from regional preciseleveling data and gaining dynamic pattern combining with deformation data on spanningfaults, the regional vertical strain dynamic evolution characteristics of several moderatelystrong earthquakes such as Lijiang (M_s 7.0) and Menyuan (M_s 6.4) earthquakes occurredin crustal deformation monitoring areas located in the western Yunnan and Qilianshan-Hexiregion. Based on the above-mentioned facts, by studying the time-space nonhomogeneity andstrain energy accumulation status, some criteria for judging the medium. and short-termstrong seismic risk regions according to the regional vertical strain rate dynamic informationare proposed.展开更多
The complete stress-strain characteristics of sandstone specimens were investigated in a series of quasistatic monotonic uniaxial compression tests.Strain patterns development during pre-and post-peak behaviours in sp...The complete stress-strain characteristics of sandstone specimens were investigated in a series of quasistatic monotonic uniaxial compression tests.Strain patterns development during pre-and post-peak behaviours in specimens with different aspect ratios was also examined.Peak stress,post-peak portion of stress-strain,brittleness,characteristics of progressive localisation and field strain patterns development were affected at different extents by specimen aspect ratio.Strain patterns of the rocks were obtained by applying three-dimensional(3D) digital image correlation(DIC) technique.Unlike conventional strain measurement using strain gauges attached to specimen,3D DIC allowed not only measuring large strains,but more importantly,mapping the development of field strain throughout the compression test,i.e.in pre-and post-peak regimes.Field strain development in the surface of rock specimen suggests that strain starts localising progressively and develops at a lower rate in pre-peak regime.However,in post-peak regime,strains increase at different rates as local deformations take place at different extents in the vicinity and outside the localised zone.The extent of localised strains together with the rate of strain localisation is associated with the increase in rate of strength degradation.Strain localisation and local inelastic unloading outside the localised zone both feature post-peak regime.展开更多
Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorit...Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorithms, several different 3D electronic speckle pattern interferometry（ESPl） systems for displacement and strain measurements have been achieved and commercialized. This paper provides a review of the recent developments in ESPI systems for 3D displacement and strain measurement. After an overview of the fundamentals of ESP! theory, temporal phase-shift, and spatial phase-shift techniques, 3D deformation measurements by the temporal phase-shift ESPI system, which is suited well for static measurement, and by the spatial phase-shift ESPI system, which is particularly useful for dynamic measurement, are discussed. For each method, the basic theory, a brief derivation and different optical layouts are presented. The state of art application, potential and limitation of the ESPI systems are shown and demonstrated.展开更多
Citrus tristeza virus （CTV）, the most devastating viral pathogen in citrus, causes tremendous economic losses to citrus industry worldwide. The CTV isolates exhibit variable pathogenicities on their hosts indicating...Citrus tristeza virus （CTV）, the most devastating viral pathogen in citrus, causes tremendous economic losses to citrus industry worldwide. The CTV isolates exhibit variable pathogenicities on their hosts indicating a mixed population of the CTV in nature. Several fragments within the CTV genome have been used for studying the genetic diversity of the CTV, however, the best region for rapid the CTV strain differentiation is still absent at present. In present study, a systemic analysis was carried out to evaluate the best region within the CTV genome for rapid CTV strain differentiation. Results of our study showed that the major coat protein （CP） coding region was the best region for this purpose. Using pair-wise distance frequency distribution plot, a reasonable genetic distance cut-off value was set for the CTV CP gene for the CTV strain differentiation. Using this criterion, eight CTV strains, including seven well characterized and a new strain, were successfully differentiated using 537 CTV isolates reported from 38 countries. The global strain distribution pattern was then determined and discussed. Our results also provided a new insight into the evolution and spreading of the virus, as well as the information for developing proper disease management strategy.展开更多
Many populations of the two-spotted spider mite, Tetranychus urticae Koch, have developed high levels of resistance to the pesticide abamectin in China and other countries. This study developed a near-isogenic line to...Many populations of the two-spotted spider mite, Tetranychus urticae Koch, have developed high levels of resistance to the pesticide abamectin in China and other countries. This study developed a near-isogenic line to understand better the inheritance, cross-resistance, and fitness costs associated with abamectin resistance in the field population of T. urticae in China. We introduced the trait that confers extremely high abamectin resistance in a field-collected population of T. urticae into a susceptible laboratory strain(IPP-SS) to generate an abamectin-resistant near-isogenic line(NIL-Aba).This process was carried out through multiple backcrossing to IPP-SS and via parthenogenesis and abamectin screening. Compared with IPP-SS, the NIL-Aba strain had a 25 147-fold resistance to abamectin and a high level of cross-resistance to bifenthrin(288.17-fold), an intermediate level to emamectin benzoate(42.57-fold), and low levels to bifenazate, chlorfenapyr, cyflumetofen, cyenopyrafen, and cyetpyrafen with resistance ranging from 3.18-to 9.31-fold.But it had no cross-resistance to profenofos. The resistance to abamectin in NIL-Aba was autosomal, incompletely dominant, and polygenic. Based on two sex life table parameters, no fitness cost was found in NIL-Aba. Establishing the NIL-Aba strain provides a reliable basis for an in-depth study of abamectin resistance in T. urticae. New information on toxicological characteristics and fitness cost should facilitate the management of abamectin resistance in field populations of T. urticae.展开更多
In this study,the strain rate-dependent dynamic tensile behavior of ZrB2-20%SiC ceramic composite was investigated using experimental and numerical approaches.The split Hopkinson pressure bar apparatus was used to mea...In this study,the strain rate-dependent dynamic tensile behavior of ZrB2-20%SiC ceramic composite was investigated using experimental and numerical approaches.The split Hopkinson pressure bar apparatus was used to measure the dynamic splitting tensile response at strain rates of 17-67 s^(−1).The experiment results demonstrate a significant strain rate dependence of the dynamic tensile behavior of the ZrB2-SiC ceramic composite.The dynamic tensile strength increased linearly with the strain rate,from 288 MPa at 17 s^(−1)to 654 MPa at 67 s^(−1).Moreover,a strain rate-dependent tensile strength was introduced into a modified JH-2 model to describe the dynamic tensile behavior and fracture process of ZrB2-SiC ceramics.The numerical results of dynamic tensile strength agree well with the experimental result.Moreover,the fracture process of ZrB2-SiC ceramics under dynamic tension was further studied by combining high-speed images and numerical results.The effect of strain rate on the fracture process and failure patterns of the ZrB2-SiC ceramic composite could be verified by the modified JH-2 model.展开更多
We present the specific ab-initio calculations that detail the variations of perovskite BaZrO3 caused by in-plane strain. Specifically, the internal relaxation, which was not captured in the widely used biaxial strain...We present the specific ab-initio calculations that detail the variations of perovskite BaZrO3 caused by in-plane strain. Specifically, the internal relaxation, which was not captured in the widely used biaxial strain model, was included in a complementary manner to lattice relaxation. Density functional theory as well as a hybrid functional method based on a plane wave basis set was employed to calculate the lattice structure, elastic constants, electronic properties and optical properties of perovskite BaZrO3. The lattice parameter c exhibited a clear linear dependence on the imposed in-plane strain, but the Poisson＇s ratio caused by internal relaxation was smaller than the elastic deformation, indicating an ＂inelastic＂ or ＂plastic＂ relaxation manner caused by the introduction of internal relaxation. As a result, the related electronic and optical properties of perovskite BaZrO3 were also strongly affected by the in-plane strain, which revealed an effective way to adjust the properties of perovskite BaZrO3 via internal relaxation.展开更多
The paper deals with different plastic deformation behavior of electroformed copper liner of shaped charge, deformed at high strain rate (about 1×107s-1) and normal strain rate (4×10-4s-1). The crystallograp...The paper deals with different plastic deformation behavior of electroformed copper liner of shaped charge, deformed at high strain rate (about 1×107s-1) and normal strain rate (4×10-4s-1). The crystallographic orientation distribution of grains in recovered slugs which had undergone high-strain-rate plastic deformation during explosive detonation was investigated by electron backscattering Kikuchi pattern technique. Cellular structures formed by tangled dislocations and sub-grain boundaries consisting of dislocation arrays were detected in the recovered slugs. Some twins and slip dislocations were observed in specimen deformed at normal strain rate. It was found that dynamic recovery and recrystallization take place during high-strain-rate deformation due to the temperature rising, whereas the conventional slip mechanism operates during deformation at normal strain rate.展开更多
Objective To obtain information on the distribution of serotypes and antimicrobial agent susceptibilities to group B streptococcus (GBS) strains isolated in Beijing area from 1991 to 1996. Methods Bacterial is...Objective To obtain information on the distribution of serotypes and antimicrobial agent susceptibilities to group B streptococcus (GBS) strains isolated in Beijing area from 1991 to 1996. Methods Bacterial isolates of GBS were obtained from vaginal and cervical tract of pregnant and nonpregnant women in Beijing Tian Tan Hospital by culture. A total of 76 GBS strains were identified finally by coagglutination. Serotyping was determined by Standard Lancefield method. Susceptibility to test agents was assessed by determining the minimal inhibitory concentrations (MICs) with agar dilution method that was established by the National Committee for Clinical Laboratory Standards (NCCLS). Results Seven serotypes were identified among 76 GBS strains isolates. Types Ⅱ (33%), Ⅲ (23%) and Ⅰa (16%) were the predominant serotypes in pregnant and nonpregnant women. MICs of penicillin G and ampicillin were ≤0.06 μg/ml. MICs of cephazolin, cefuroxime and cefoperozone were 0.003 μg/ml 0.06 μg/ml. MICs of erythromycin were 0.003 μg/ml 0.03 μg/ml. MICs of gentamycin were 1 μg/ml 32 μg/ml. MICs of amikacin were 4 μg/ml ≥64 μg/ml, nearly 12.8% and 40.4% of the strains were resistant to gentamycin and amikacin, respectively. Conclusions Our study provides useful epidemiologic data for preparation of GBS type specific vaccines which can prevent GBS infections and antimicrobial agents susceptibility patterns in China. Routine reports on GBS susceptibilities by clinical laboratories and continuous surveillance for changes in the susceptibility are of considerable clinical importance.展开更多
Electronic speckle pattern interferometry（ESPI） and digital speckle pattern interferometry are wellestablished non-contact measurement methods. They have been widely used to carry out precise deformation mapping. Ho...Electronic speckle pattern interferometry（ESPI） and digital speckle pattern interferometry are wellestablished non-contact measurement methods. They have been widely used to carry out precise deformation mapping. However, the simultaneous two-dimensional（2D） or three-dimensional（3D） deformation measurements using ESPI with phase shifting usually involve complicated and slow equipment. In this Letter, we solve these issues by proposing a modified ESPI system based on double phase modulations with only one laser and one camera. In-plane normal and shear strains are obtained with good quality. This system can also be developed to measure 3D deformation, and it has the potential to carry out faster measurements with a highspeed camera.展开更多
基金National Natural Science Foundations of China(Nos.11272087,11572085)Financial Supports from Foundation for the Fok Ying-Tong Education Foundation of China(No.141070)the Fundamental Research Funds for the Central Universities of China(No.170310103)
文摘The in-plane tensile behaviors of bi-axial warp-knitted(BWK) composites under quasi-static and high strain rates loading were experimentally analyzed in this article. The tensile tests were conducted along warp direction( 0°) and weft direction( 90°) at quasi-static rate of 0. 001 s^(-1) and high strain rates ranging from 1 450 to 2 540 s^(-1),respectively. It is found that the significant strain rate sensitivity can be observed in the stress-strain curves of BWK composites. The fracture morphologies of BWK composites demonstrate that the tensile failure modes are shear failure and fiber breakage under the quasi-static testing condition while interface failure and fibers pullout are at high strain rates.
文摘Fieldwork along several segments of the Altyn Tagh Fault,between 85 and 95°E,confirms that it ranks as one of the most active faults of Asia.In the East,near Aksay,the active fault trace offsets numerous stream channels,terrace risers and fans tens to hundreds of meters. 14 C dating of organic remains and charcoal within terrace gravels indicates that most of the terraces were emplaced after the beginning of the Holocene,implying a left\|slip rate of about 2cm/a.Large mole tracks attest to the occurrence of great earthquakes.Even larger mole tracks are found north of Lenghu,within the Altun Shan push\|up,a 6000 m high range in a restraining bend of the fault,now sliced by its most active strand.North of Huatougou,at the transition between another push\|up mountain and a recent pull\|apart basin,a spectacular sequence of five flat\|floored,hanging channels,beheaded by the fault from a unique source in the mountain,have been horizontally displaced by up to 1250m.Cosmogenic dating of the abandonment of these channels and of nearby offset terrace risers confirms the slip\|rate at Aksay.Several km to the west,pressure ridges exceeding 10m in height across a large young fan,imply the repeat of several great earthquakes in a relatively short time span.
基金financially supported by the National Natural Science Foundation of China (Nos. 51171076 and 51101079)the Fundamental Research Funds for Central Universities (Nos. lzujbky-2010-172 and Lzujbky-2012-27)
文摘Strip-like Fe Co films were patterned by a traditional lithograph process from intrinsically isotropic continuous Fe Co films. The strip-patterned Fe Co film shows a strong in-plane uniaxial magnetic anisotropy with easy axis along the length direction of the strip. The angular dependences of remanence ratio, switching field, and coercivity indicate that the magnetization reversal mechanism of the strip-patterned Fe Co film is coherent rotation and domain wall depinning when the applied field is near the hard axis and easy axis, respectively. The consistency of the experimental hysteresis loops of the strip-patterned Fe Co film and calculated hysteresis loops with a simple in-plane uniaxial anisotropy model indicates that the strip-patterned Fe Co film behaves as a single domain. The absence of the domain wall and the strong in-plane anisotropy field make the strip-patterned Fe Co films have much potential for high-frequency application.
基金supported by the Centro de Investigación para el Desarrollo y la Innovación (CIDI) from Universidad Pontificia Bolivariana (No. 636B-06/16–57)。
文摘Structural Health Monitoring(SHM) suggests the use of machine learning algorithms with the aim of understanding specific behaviors in a structural system. This work introduces a pattern recognition methodology for operational condition clustering in a structure sample using the well known Density Based Spatial Clustering of Applications with Noise(DBSCAN) algorithm.The methodology was validated using a data set from an experiment with 32 Fiber Bragg Gratings bonded to an aluminum beam placed in cantilever and submitted to cyclic bending loads under 13 different operational conditions(pitch angles). Further, the computational cost and precision of the machine learning pipeline called FA + GA-DBSCAN(which employs a combination of machine learning techniques including factor analysis for dimensionality reduction and a genetic algorithm for the automatic selection of initial parameters of DBSCAN) was measured. The obtained results have shown a good performance, detecting 12 of 13 operational conditions, with an overall precision over 90%.
基金The project supported by Alexander von Humboldt Foundation or Germany and the National Natural Science Foundation of China
文摘This paper presents a fringe-carrier method that eliminates sign ambiguity of transient moire fringes which can be used to automatically determine the relative orders. A fringe carrier is preset in the static state of the specimen and the dynamic in-plane displacements are recorded as the modulation to the frequency of the carrier fringes when the specimen is loaded by impact. According to a modulating criterion developed from the modulation degree, the fringes of the transient moire patterns keep monotonical in orders so that they can be automatically encoded in grey levels by a digital image system. The moire orders purely caused by dynamic loadings are evaluated by subtracting the grey-value of the unmodulated carrier image from that of the modulated carrier images encoded by their orders. With the subtracted moire orders the strain components can be obtained, and, correspondingly, the histograms of dynamic displacement moire images are shown with order variation by image-difference.
基金Projects(51278209 and 51478047) supported by the National Natural Science Foundation of ChinaProject(ZQN-PY110) supported by Promotion Program for Young and Middle-aged Teacher in Science and Technology Research of Huaqiao University,China+1 种基金Project(2014FJ-NCET-ZR03) supported by Program for New Century Excellent Talents in Fujian Province University,ChinaProject(JA13005) supported by Incubation Programme for Excellent Young Science and Technology Talents in Fujian Province Universities,China
文摘The static test of 13 square hollow section(SHS) X-joints with different β and different types of plate reinforcement under in-plane moment in brace was carried out. Experimental test schemes, failure modes of specimens, moment-vertical displacement curves, moment-deformation of the chord, and strain strength distribution curves were presented. The effect of β and plate reinforcement types on in-plane flexural property of SHS X-joints was studied. Results show that punching shear of chord face disappears, brace material fracture appears and concave and convex deformation of chord decrease when either collar plates or doubler plates were welded on chord face. Moment-vertical displacement curves of all specimens have obvious elastic, elastic-plastic and plastic stages. As β increases, the in-plane flexural ultimate capacity and initial stiffness of joints of the same plate reinforcement type increase, but ductility of joints decreases. With the same β, the in-plane flexural initial stiffness and ultimate capacity of doubler plate reinforced joints, collar plate reinforced joints, and unreinforced joints decrease progressively. Thickness of reinforcement plate has no obvious effect on in-plane flexural initial stiffness and ultimate capacity of joints. As thickness of reinforcement plate increases, the ductility of reinforced X-joints decreases. The concave and convex deformation of every specimen has good symmetry;as β increases, the yield and ultimate deformation of chord decrease.
基金This research was sponsored by the National Key Basic Research Project (G1998040703) and China Seismological Burear (95-04-04-01-01).
文摘Making use of the method of obtaining regional vertical strain rate from regional preciseleveling data and gaining dynamic pattern combining with deformation data on spanningfaults, the regional vertical strain dynamic evolution characteristics of several moderatelystrong earthquakes such as Lijiang (M_s 7.0) and Menyuan (M_s 6.4) earthquakes occurredin crustal deformation monitoring areas located in the western Yunnan and Qilianshan-Hexiregion. Based on the above-mentioned facts, by studying the time-space nonhomogeneity andstrain energy accumulation status, some criteria for judging the medium. and short-termstrong seismic risk regions according to the regional vertical strain rate dynamic informationare proposed.
基金supported by the Deep Exploration Technologies Cooperative Research Centre whose activities are funded by the Australian Government's Cooperative Research Centre Programme.This is DET CRC Document 2017/954
文摘The complete stress-strain characteristics of sandstone specimens were investigated in a series of quasistatic monotonic uniaxial compression tests.Strain patterns development during pre-and post-peak behaviours in specimens with different aspect ratios was also examined.Peak stress,post-peak portion of stress-strain,brittleness,characteristics of progressive localisation and field strain patterns development were affected at different extents by specimen aspect ratio.Strain patterns of the rocks were obtained by applying three-dimensional(3D) digital image correlation(DIC) technique.Unlike conventional strain measurement using strain gauges attached to specimen,3D DIC allowed not only measuring large strains,but more importantly,mapping the development of field strain throughout the compression test,i.e.in pre-and post-peak regimes.Field strain development in the surface of rock specimen suggests that strain starts localising progressively and develops at a lower rate in pre-peak regime.However,in post-peak regime,strains increase at different rates as local deformations take place at different extents in the vicinity and outside the localised zone.The extent of localised strains together with the rate of strain localisation is associated with the increase in rate of strength degradation.Strain localisation and local inelastic unloading outside the localised zone both feature post-peak regime.
基金supported by National Natural Science Foundation of China(Grant Nos.51275054,51075116)
文摘Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorithms, several different 3D electronic speckle pattern interferometry（ESPl） systems for displacement and strain measurements have been achieved and commercialized. This paper provides a review of the recent developments in ESPI systems for 3D displacement and strain measurement. After an overview of the fundamentals of ESP! theory, temporal phase-shift, and spatial phase-shift techniques, 3D deformation measurements by the temporal phase-shift ESPI system, which is suited well for static measurement, and by the spatial phase-shift ESPI system, which is particularly useful for dynamic measurement, are discussed. For each method, the basic theory, a brief derivation and different optical layouts are presented. The state of art application, potential and limitation of the ESPI systems are shown and demonstrated.
基金Supported by the National Natural Science Foundation of China (31101417 31101415)+1 种基金Zhejiang Provincial Natural Science Foundation of China (Y3110175 Y3110277)
文摘Citrus tristeza virus （CTV）, the most devastating viral pathogen in citrus, causes tremendous economic losses to citrus industry worldwide. The CTV isolates exhibit variable pathogenicities on their hosts indicating a mixed population of the CTV in nature. Several fragments within the CTV genome have been used for studying the genetic diversity of the CTV, however, the best region for rapid the CTV strain differentiation is still absent at present. In present study, a systemic analysis was carried out to evaluate the best region within the CTV genome for rapid CTV strain differentiation. Results of our study showed that the major coat protein （CP） coding region was the best region for this purpose. Using pair-wise distance frequency distribution plot, a reasonable genetic distance cut-off value was set for the CTV CP gene for the CTV strain differentiation. Using this criterion, eight CTV strains, including seven well characterized and a new strain, were successfully differentiated using 537 CTV isolates reported from 38 countries. The global strain distribution pattern was then determined and discussed. Our results also provided a new insight into the evolution and spreading of the virus, as well as the information for developing proper disease management strategy.
基金funded by the National Natural Science Foundation of China (32072458)the earmarked fund for China Agriculture Research System (CARS-25)the Beijing Key Laboratory for Pest Control and Sustainable Cultivation of Vegetables, China, and the Science and Technology Innovation Program of the Chinese Academy of Agricultural Sciences (CAAS-ASTIPIVFCAAS)。
文摘Many populations of the two-spotted spider mite, Tetranychus urticae Koch, have developed high levels of resistance to the pesticide abamectin in China and other countries. This study developed a near-isogenic line to understand better the inheritance, cross-resistance, and fitness costs associated with abamectin resistance in the field population of T. urticae in China. We introduced the trait that confers extremely high abamectin resistance in a field-collected population of T. urticae into a susceptible laboratory strain(IPP-SS) to generate an abamectin-resistant near-isogenic line(NIL-Aba).This process was carried out through multiple backcrossing to IPP-SS and via parthenogenesis and abamectin screening. Compared with IPP-SS, the NIL-Aba strain had a 25 147-fold resistance to abamectin and a high level of cross-resistance to bifenthrin(288.17-fold), an intermediate level to emamectin benzoate(42.57-fold), and low levels to bifenazate, chlorfenapyr, cyflumetofen, cyenopyrafen, and cyetpyrafen with resistance ranging from 3.18-to 9.31-fold.But it had no cross-resistance to profenofos. The resistance to abamectin in NIL-Aba was autosomal, incompletely dominant, and polygenic. Based on two sex life table parameters, no fitness cost was found in NIL-Aba. Establishing the NIL-Aba strain provides a reliable basis for an in-depth study of abamectin resistance in T. urticae. New information on toxicological characteristics and fitness cost should facilitate the management of abamectin resistance in field populations of T. urticae.
基金This work was supported by the National Natural Science Foundation of China(Grant Nos.11602061 and 51968009)Science and Technology Planning Project of Guizhou Province(Grant Nos.[2017]1033 and[2020]1Y244)Civil Engineering First-Class Discipline Construction Project of Guizhou Province(Grant No.QYNYL[2017]0013).
文摘In this study,the strain rate-dependent dynamic tensile behavior of ZrB2-20%SiC ceramic composite was investigated using experimental and numerical approaches.The split Hopkinson pressure bar apparatus was used to measure the dynamic splitting tensile response at strain rates of 17-67 s^(−1).The experiment results demonstrate a significant strain rate dependence of the dynamic tensile behavior of the ZrB2-SiC ceramic composite.The dynamic tensile strength increased linearly with the strain rate,from 288 MPa at 17 s^(−1)to 654 MPa at 67 s^(−1).Moreover,a strain rate-dependent tensile strength was introduced into a modified JH-2 model to describe the dynamic tensile behavior and fracture process of ZrB2-SiC ceramics.The numerical results of dynamic tensile strength agree well with the experimental result.Moreover,the fracture process of ZrB2-SiC ceramics under dynamic tension was further studied by combining high-speed images and numerical results.The effect of strain rate on the fracture process and failure patterns of the ZrB2-SiC ceramic composite could be verified by the modified JH-2 model.
基金Funded by the National Natural Science Foundation of China(No.51502179)the Colleges and Universities in Hebei Province Science and Technology Research Project(No.YQ2014033)the Hebei Key Discipline Construction Project(B2012210004 and E2013210038)
文摘We present the specific ab-initio calculations that detail the variations of perovskite BaZrO3 caused by in-plane strain. Specifically, the internal relaxation, which was not captured in the widely used biaxial strain model, was included in a complementary manner to lattice relaxation. Density functional theory as well as a hybrid functional method based on a plane wave basis set was employed to calculate the lattice structure, elastic constants, electronic properties and optical properties of perovskite BaZrO3. The lattice parameter c exhibited a clear linear dependence on the imposed in-plane strain, but the Poisson＇s ratio caused by internal relaxation was smaller than the elastic deformation, indicating an ＂inelastic＂ or ＂plastic＂ relaxation manner caused by the introduction of internal relaxation. As a result, the related electronic and optical properties of perovskite BaZrO3 were also strongly affected by the in-plane strain, which revealed an effective way to adjust the properties of perovskite BaZrO3 via internal relaxation.
文摘The paper deals with different plastic deformation behavior of electroformed copper liner of shaped charge, deformed at high strain rate (about 1×107s-1) and normal strain rate (4×10-4s-1). The crystallographic orientation distribution of grains in recovered slugs which had undergone high-strain-rate plastic deformation during explosive detonation was investigated by electron backscattering Kikuchi pattern technique. Cellular structures formed by tangled dislocations and sub-grain boundaries consisting of dislocation arrays were detected in the recovered slugs. Some twins and slip dislocations were observed in specimen deformed at normal strain rate. It was found that dynamic recovery and recrystallization take place during high-strain-rate deformation due to the temperature rising, whereas the conventional slip mechanism operates during deformation at normal strain rate.
文摘Objective To obtain information on the distribution of serotypes and antimicrobial agent susceptibilities to group B streptococcus (GBS) strains isolated in Beijing area from 1991 to 1996. Methods Bacterial isolates of GBS were obtained from vaginal and cervical tract of pregnant and nonpregnant women in Beijing Tian Tan Hospital by culture. A total of 76 GBS strains were identified finally by coagglutination. Serotyping was determined by Standard Lancefield method. Susceptibility to test agents was assessed by determining the minimal inhibitory concentrations (MICs) with agar dilution method that was established by the National Committee for Clinical Laboratory Standards (NCCLS). Results Seven serotypes were identified among 76 GBS strains isolates. Types Ⅱ (33%), Ⅲ (23%) and Ⅰa (16%) were the predominant serotypes in pregnant and nonpregnant women. MICs of penicillin G and ampicillin were ≤0.06 μg/ml. MICs of cephazolin, cefuroxime and cefoperozone were 0.003 μg/ml 0.06 μg/ml. MICs of erythromycin were 0.003 μg/ml 0.03 μg/ml. MICs of gentamycin were 1 μg/ml 32 μg/ml. MICs of amikacin were 4 μg/ml ≥64 μg/ml, nearly 12.8% and 40.4% of the strains were resistant to gentamycin and amikacin, respectively. Conclusions Our study provides useful epidemiologic data for preparation of GBS type specific vaccines which can prevent GBS infections and antimicrobial agents susceptibility patterns in China. Routine reports on GBS susceptibilities by clinical laboratories and continuous surveillance for changes in the susceptibility are of considerable clinical importance.
基金financially supported by the ANR Micromorfing Program(ANR-14-CE07-0035)China Scholarship Council(CSC)the Labex Action
文摘Electronic speckle pattern interferometry（ESPI） and digital speckle pattern interferometry are wellestablished non-contact measurement methods. They have been widely used to carry out precise deformation mapping. However, the simultaneous two-dimensional（2D） or three-dimensional（3D） deformation measurements using ESPI with phase shifting usually involve complicated and slow equipment. In this Letter, we solve these issues by proposing a modified ESPI system based on double phase modulations with only one laser and one camera. In-plane normal and shear strains are obtained with good quality. This system can also be developed to measure 3D deformation, and it has the potential to carry out faster measurements with a highspeed camera.
