According to these characteristics of the movement of the special platform servo,a new improved grey predictive PID control algorithm was proposed based on the grey predictive PID,and then the algorithm was simulated ...According to these characteristics of the movement of the special platform servo,a new improved grey predictive PID control algorithm was proposed based on the grey predictive PID,and then the algorithm was simulated by MATLAB.As a result that it can improve the response speed and stability of the system,and meet the demand of the system.展开更多
This paper deeply analyzes the closed-loop nature ofGPCin the fram ework ofinter- nalm odelcontrol(IMC) theory. A new sort ofrelation lies in the feedback structure so that robustreason can be satisfactorily explain...This paper deeply analyzes the closed-loop nature ofGPCin the fram ework ofinter- nalm odelcontrol(IMC) theory. A new sort ofrelation lies in the feedback structure so that robustreason can be satisfactorily explained. The resultissignificantbecause the previous con- clusions are only applied to open-loop stable plant(orm odel).展开更多
A new framework for networked control system based on Generalized Predictive Control (GPC) is proposed in this paper. Clock-driven sensors, event-driven controller, and clock-driven actuators are required in this fram...A new framework for networked control system based on Generalized Predictive Control (GPC) is proposed in this paper. Clock-driven sensors, event-driven controller, and clock-driven actuators are required in this framework. A queuing strategy is proposed to overcome the network induced delay. Without redesigning, the proposed framework enables the existing GPC controller to be used in a network environment. It also does not require clock synchronization and is only slightly affected by bad network condition such as package loss. Various experiments are designed over the real network to test the proposed approach, which verify that the proposed approach can stabilize the Networked Control System (NCS) and is robust.展开更多
In textile industry, carding process has decisive influence on produced yarn quality. From the system theoretic point of view, it is marked by stochastic disturbance, long delays, and parameter variation. So, a cardin...In textile industry, carding process has decisive influence on produced yarn quality. From the system theoretic point of view, it is marked by stochastic disturbance, long delays, and parameter variation. So, a carding process is difficult to control with traditional control algorithms (such as PID). In this paper, a weighted adaptive generalized predictive control (GPC) law was developed to control such a process. The experimental results show that GPC autoleveller controller could greatly reduce the sliver’s standard deviation and reject disturbance.展开更多
This paper describes the self—adjustment of some tuning-knobs of the generalized predictive controller(GPC).A three feedforward neural network was utilized to on line learn two key tuning-knobs of GPC,and BP algorith...This paper describes the self—adjustment of some tuning-knobs of the generalized predictive controller(GPC).A three feedforward neural network was utilized to on line learn two key tuning-knobs of GPC,and BP algorithm was used for the training of the linking-weights of the neural network.Hence it gets rid of the difficulty of choosing these tuning-knobs manually and provides easier condition for the wide applications of GPC on industrial plants.Simulation results illustrated the effectiveness of the method.展开更多
The fluctuation of active power output of wind farm has many negative impacts on large-scale wind power integration into power grid. In this paper, flywheel energy storage system (FESS) was connected to AC side of the...The fluctuation of active power output of wind farm has many negative impacts on large-scale wind power integration into power grid. In this paper, flywheel energy storage system (FESS) was connected to AC side of the doubly-fed induction generator (DFIG) wind farm to realize smooth control of wind power output. Based on improved wind power prediction algorithm and wind speed-power curve modeling, a new smooth control strategy with the FESS was proposed. The requirement of power system dispatch for wind power prediction and flywheel rotor speed limit were taken into consideration during the process. While smoothing the wind power fluctuation, FESS can track short-term planned output of wind farm. It was demonstrated by quantitative analysis of simulation results that the proposed control strategy can smooth the active power fluctuation of wind farm effectively and thereby improve power quality of the power grid.展开更多
In predictive direct power control(PDPC)system of three-phase pulse width modulation(PWM)rectifier,grid voltage sensor makes the whole system more complex and costly.Therefore,third-order generalized integrator(TOGI)i...In predictive direct power control(PDPC)system of three-phase pulse width modulation(PWM)rectifier,grid voltage sensor makes the whole system more complex and costly.Therefore,third-order generalized integrator(TOGI)is used to generate orthogonal signals with the same frequency to estimate the grid voltage.In addition,in view of the deviation between actual and reference power in the three-phase PWM rectifier traditional PDPC strategy,a power correction link is designed to correct the power reference value.The grid voltage sensor free algorithm based on TOGI and the corrected PDPC strategy are applied to three-phase PWM rectifier and simulated on the simulation platform.Simulation results show that the proposed method can effectively eliminate the power tracking deviation and the grid voltage.The effectiveness of the proposed method is verified by comparing the simulation results.展开更多
A constrained generalized predictive control （GPC） algorithm based on the T-S fuzzy model is presented for the nonlinear system. First, a Takagi-Sugeno （T-S） fuzzy model based on the fuzzy cluster algorithm and th...A constrained generalized predictive control （GPC） algorithm based on the T-S fuzzy model is presented for the nonlinear system. First, a Takagi-Sugeno （T-S） fuzzy model based on the fuzzy cluster algorithm and the orthogonalleast square method is constructed to approach the nonlinear system. Since its consequence is linear, it can divide the nonlinear system into a number of linear or nearly linear subsystems. For this T-S fuzzy model, a GPC algorithm with input constraints is presented. This strategy takes into account all the constraints of the control signal and its increment, and does not require the calculation of the Diophantine equations. So it needs only a small computer memory and the computational speed is high. The simulation results show a good performance for the nonlinear systems.展开更多
This paper investigates how to address the chaos problem in a permanent magnet synchronous generator（PMSG） in a wind turbine system. Predictive control approach is proposed to suppress chaotic behavior and make oper...This paper investigates how to address the chaos problem in a permanent magnet synchronous generator（PMSG） in a wind turbine system. Predictive control approach is proposed to suppress chaotic behavior and make operating stable;the advantage of this method is that it can only be applied to one state of the wind turbine system. The use of the genetic algorithms to estimate the optimal parameter values of the wind turbine leads to maximization of the power generation.Moreover, some simulation results are included to visualize the effectiveness and robustness of the proposed method.展开更多
The batch dyeing process is a typical nonlinear process with time-delay,where precise controlling of temperature plays a vital role on the dyeing quality.Because the accuracy and robustness of the commonly used propor...The batch dyeing process is a typical nonlinear process with time-delay,where precise controlling of temperature plays a vital role on the dyeing quality.Because the accuracy and robustness of the commonly used proportion integration differentiation(PID) algorithm had been limited,a novel method was developed to precisely control the heating and cooling stages for batch dyeing process based on predictive sliding mode control(SMC) algorithm.Firstly,a special predictive sliding mode model was constructed according to the principle of generalized predictive control(GPC);secondly,an appropriate reference trajectory for SMC was designed based on the improved approaching law;finally,the predictive sliding mode model and the Diophantine equation were used to predict the output and then the optimized control law was derived using the generalized predictive law.This method combined GPC and the SMC with their respective advantages,so it could be applied to time-delay process,making the control system more robust.Simulation experiments show that this algorithm can well track the temperature variation for the batch dyeing process.展开更多
In this paper,a Novel Compliant Actuator(NCA)-driven Upper-Limb Exoskeleton(ULE)with force controllable,impact resistance,and back drivability is designed to ensure the safety of the subject during Human-Robot Interac...In this paper,a Novel Compliant Actuator(NCA)-driven Upper-Limb Exoskeleton(ULE)with force controllable,impact resistance,and back drivability is designed to ensure the safety of the subject during Human-Robot Interaction(HRI)processing.Based on the designed NCA-driven ULE,this paper constructs a Model Predictive Control Scheme(MPCS)for force trajectory tracking,which minimises future tracking errors by solving an optimal control problem with inequality constraints.In addition,an Error-Accumulation Improved Newton Algorithm(EAINA)is proposed to solve the MPCS for suppressing various noises and external disturbances.The proposed EAINA is theoretically proved to have small steady state for noise conditions and stability of the EAINA using Lyapunov method.Finally,experimental results verify that the proposed MPCS solved by the EAINA in the NCA-driven ULE achieves robustness,fast convergence,strong tolerance and stability for trajectory rehabilitation task.展开更多
基金supported by the Chongqing Scientific and Technological Innovating Program under grant CSTC2008AC1014
文摘According to these characteristics of the movement of the special platform servo,a new improved grey predictive PID control algorithm was proposed based on the grey predictive PID,and then the algorithm was simulated by MATLAB.As a result that it can improve the response speed and stability of the system,and meet the demand of the system.
文摘This paper deeply analyzes the closed-loop nature ofGPCin the fram ework ofinter- nalm odelcontrol(IMC) theory. A new sort ofrelation lies in the feedback structure so that robustreason can be satisfactorily explained. The resultissignificantbecause the previous con- clusions are only applied to open-loop stable plant(orm odel).
文摘A new framework for networked control system based on Generalized Predictive Control (GPC) is proposed in this paper. Clock-driven sensors, event-driven controller, and clock-driven actuators are required in this framework. A queuing strategy is proposed to overcome the network induced delay. Without redesigning, the proposed framework enables the existing GPC controller to be used in a network environment. It also does not require clock synchronization and is only slightly affected by bad network condition such as package loss. Various experiments are designed over the real network to test the proposed approach, which verify that the proposed approach can stabilize the Networked Control System (NCS) and is robust.
基金National Innovation Foundation ResearchProgram of Small-Medium Sized Enterprise(No.03C26113200125)
文摘In textile industry, carding process has decisive influence on produced yarn quality. From the system theoretic point of view, it is marked by stochastic disturbance, long delays, and parameter variation. So, a carding process is difficult to control with traditional control algorithms (such as PID). In this paper, a weighted adaptive generalized predictive control (GPC) law was developed to control such a process. The experimental results show that GPC autoleveller controller could greatly reduce the sliver’s standard deviation and reject disturbance.
基金Supported by the National 863 CIMS Project Foundation(863-511-010)Tianjin Natural Science Foundation(983602011)Backbone Young Teacher Project Foundation of Ministry of Education
文摘This paper describes the self—adjustment of some tuning-knobs of the generalized predictive controller(GPC).A three feedforward neural network was utilized to on line learn two key tuning-knobs of GPC,and BP algorithm was used for the training of the linking-weights of the neural network.Hence it gets rid of the difficulty of choosing these tuning-knobs manually and provides easier condition for the wide applications of GPC on industrial plants.Simulation results illustrated the effectiveness of the method.
文摘The fluctuation of active power output of wind farm has many negative impacts on large-scale wind power integration into power grid. In this paper, flywheel energy storage system (FESS) was connected to AC side of the doubly-fed induction generator (DFIG) wind farm to realize smooth control of wind power output. Based on improved wind power prediction algorithm and wind speed-power curve modeling, a new smooth control strategy with the FESS was proposed. The requirement of power system dispatch for wind power prediction and flywheel rotor speed limit were taken into consideration during the process. While smoothing the wind power fluctuation, FESS can track short-term planned output of wind farm. It was demonstrated by quantitative analysis of simulation results that the proposed control strategy can smooth the active power fluctuation of wind farm effectively and thereby improve power quality of the power grid.
基金National Natural Science Foundation of China(Nos.51767013,52067013)。
文摘In predictive direct power control(PDPC)system of three-phase pulse width modulation(PWM)rectifier,grid voltage sensor makes the whole system more complex and costly.Therefore,third-order generalized integrator(TOGI)is used to generate orthogonal signals with the same frequency to estimate the grid voltage.In addition,in view of the deviation between actual and reference power in the three-phase PWM rectifier traditional PDPC strategy,a power correction link is designed to correct the power reference value.The grid voltage sensor free algorithm based on TOGI and the corrected PDPC strategy are applied to three-phase PWM rectifier and simulated on the simulation platform.Simulation results show that the proposed method can effectively eliminate the power tracking deviation and the grid voltage.The effectiveness of the proposed method is verified by comparing the simulation results.
基金This Project was supported by the National Natural Science Foundation of China (60374037 and 60574036)the Opening Project Foundation of National Lab of Industrial Control Technology (0708008).
文摘A constrained generalized predictive control （GPC） algorithm based on the T-S fuzzy model is presented for the nonlinear system. First, a Takagi-Sugeno （T-S） fuzzy model based on the fuzzy cluster algorithm and the orthogonalleast square method is constructed to approach the nonlinear system. Since its consequence is linear, it can divide the nonlinear system into a number of linear or nearly linear subsystems. For this T-S fuzzy model, a GPC algorithm with input constraints is presented. This strategy takes into account all the constraints of the control signal and its increment, and does not require the calculation of the Diophantine equations. So it needs only a small computer memory and the computational speed is high. The simulation results show a good performance for the nonlinear systems.
基金Project supported by the CMEP-TASSILI Project(Grant No.14MDU920)
文摘This paper investigates how to address the chaos problem in a permanent magnet synchronous generator（PMSG） in a wind turbine system. Predictive control approach is proposed to suppress chaotic behavior and make operating stable;the advantage of this method is that it can only be applied to one state of the wind turbine system. The use of the genetic algorithms to estimate the optimal parameter values of the wind turbine leads to maximization of the power generation.Moreover, some simulation results are included to visualize the effectiveness and robustness of the proposed method.
基金National Natural Science Foundation of China(No.61074154)
文摘The batch dyeing process is a typical nonlinear process with time-delay,where precise controlling of temperature plays a vital role on the dyeing quality.Because the accuracy and robustness of the commonly used proportion integration differentiation(PID) algorithm had been limited,a novel method was developed to precisely control the heating and cooling stages for batch dyeing process based on predictive sliding mode control(SMC) algorithm.Firstly,a special predictive sliding mode model was constructed according to the principle of generalized predictive control(GPC);secondly,an appropriate reference trajectory for SMC was designed based on the improved approaching law;finally,the predictive sliding mode model and the Diophantine equation were used to predict the output and then the optimized control law was derived using the generalized predictive law.This method combined GPC and the SMC with their respective advantages,so it could be applied to time-delay process,making the control system more robust.Simulation experiments show that this algorithm can well track the temperature variation for the batch dyeing process.
基金supported by the National Natural Science Foundation of China(Nos.62373065,61873304,62173048,and 62106023)the Key Science and Technology Projects of Jilin Province,China(No.20230204081YY).
文摘In this paper,a Novel Compliant Actuator(NCA)-driven Upper-Limb Exoskeleton(ULE)with force controllable,impact resistance,and back drivability is designed to ensure the safety of the subject during Human-Robot Interaction(HRI)processing.Based on the designed NCA-driven ULE,this paper constructs a Model Predictive Control Scheme(MPCS)for force trajectory tracking,which minimises future tracking errors by solving an optimal control problem with inequality constraints.In addition,an Error-Accumulation Improved Newton Algorithm(EAINA)is proposed to solve the MPCS for suppressing various noises and external disturbances.The proposed EAINA is theoretically proved to have small steady state for noise conditions and stability of the EAINA using Lyapunov method.Finally,experimental results verify that the proposed MPCS solved by the EAINA in the NCA-driven ULE achieves robustness,fast convergence,strong tolerance and stability for trajectory rehabilitation task.
