L-carnitine selective polymers were prepared by molecular imprinting using methacrylic acid as the functional monomer. The acid function of the monomer is expected to form hydrogen bond and ionic interactions with th...L-carnitine selective polymers were prepared by molecular imprinting using methacrylic acid as the functional monomer. The acid function of the monomer is expected to form hydrogen bond and ionic interactions with the amine function of the target molecule L-carnitine. The imprinted polymers were used as stationary phases in high-performance liquid chromatography (HPLC). It was shown that L-carnitine imprinted polymer exhibited a higher affinity to its template molecule, while the non-imprinted polymer had no affinity to the compounds tested. Racemic carnitine hydrochloride was efficiently resolved on the L-carnitine imprinted polymer, and the separation factor is 1.9.展开更多
Molecular imprinting polymers (MIPs) against N-Cbz-L-Tyr were prepared utilizing different polymer systems and evaluated in HPLC mode. It was found that MIP utilizing cocktail functional monomers, acrylamide + 2-vinyl...Molecular imprinting polymers (MIPs) against N-Cbz-L-Tyr were prepared utilizing different polymer systems and evaluated in HPLC mode. It was found that MIP utilizing cocktail functional monomers, acrylamide + 2-vinylpyridine showed better molecular recognition and better separation ability for the template molecule than those utilizing other functional monomers. MIP utilizing trimethylolpropane trimethacrylate as cross-linker showed higher load capacity and separation factor than those utilizing ethylene glycol dimethacrylate as cross-linker. Increasing the concentration of competing solvent, acetic acid weakened me ionic interaction and hydrogen bonding between the analyte and the functional monomers, 2-vinylpyridine and acrylamide, when me template enantiomer was separated by HPLC. Therefore increasing of the concentration of acetic acid leads to decreasing of capacity factor, separation factor and resolution.展开更多
As a typical bioflavonoid,diosmetin is desirable in the field of natural medicine,healthy food,and cosmetics by anti-cancer,antibacterial,antioxidant,estrogen-like and anti-inflammatory activities,and it comes from a ...As a typical bioflavonoid,diosmetin is desirable in the field of natural medicine,healthy food,and cosmetics by anti-cancer,antibacterial,antioxidant,estrogen-like and anti-inflammatory activities,and it comes from a wide range of sources in traditional Chinese medicine like spider fragrance,spearmint and chrysanthemum,as well as in Citrus fruit.However,traditional analytical methods such as silica gel column chromatography face multiple challenges in the selective extraction of diosmetin from biological materials and traditional Chinese medicinal materials.Therefore,it is urgent to develop a new type of absorbent with high efficiency,recyclability and good specificity to diosmetin.In this investigation,a magnetic surface molecularly imprinted polymer(labeled as Diosmetin/SMIPs)was synthesized employing magnetic nanoparticles as the carrier and 4-vinylpyridinyl(4-VP)as the functional monomer by surface imprinting technology.The functional monomer was screened by the binding energy(△E)between functional monomers and template molecules via computational simulation.The Diosmetin/SMIPs had a high level of specific recognition and adsorption capability towards diosmetin with a 20.25 mg g^(-1) adsorption capacity and an imprinting factor(IF)of 2.28.Additionally,it demonstrated excellent regeneration performance with 8 adsorption/desorption cycles.In addition,91.20%-94.16% of spiked diosmetin was recovered from the lemon peel samples.The strategy of constructing Diosmetin/SMIPs based on computational simulation can effectively enhance the specific adsorption performance of diosmetin.Meanwhile,Diosmetin/SMIPs synthesized by imprinting polymerization showed excellent anti-interference and reusability,and realized efficient targeted extraction of diosmetin from lemon peel samples.The results of this investigation provide a promising adsorbent for selective enrichment of diosmetin from Citrus fruit and complicated materials.展开更多
In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was...In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was developed.The MIP film was synthesized on the surface of gold electrode via electrochemical polymerization,using pyrrole(PY)as the functional monomer and KA as the template molecule.The commonly used luminescent reagent Ru(bpy)32+was employed as the ECL probe,and its co-reagent tripropylamine(TPA)was added to enhance the detection sensitivity of the sensor.Quantitative analysis of KA was performed by evaluating the difference in ECL responses between MIP film electrodes after KA removal and KA rebinding.The sensor exhibited high selectivity,good reproducibility,and stability toward KA,with a linear range of 5.00×10^(-8) to 1.00×10^(-5) mol·L^(-1) and a limit of detection of 1.67×10^(-8) mol·L^(-1)(S/N=3).This work would provide a new idea for the development of simple and sensitive molecularly imprinted ECL sensors.展开更多
Bromocresol green(BCG)and malachite green(MG)are water-soluble toxic organic dyes with adverse health and environmental implications.This study presented a conjugate imprinted adsorbent(CIA)synthesized by incorporatin...Bromocresol green(BCG)and malachite green(MG)are water-soluble toxic organic dyes with adverse health and environmental implications.This study presented a conjugate imprinted adsorbent(CIA)synthesized by incorporating trimethoprim vanillin ligand into a highly crosslinked polymer,designed for the efficient removal of BCG and MG from wastewater.Characterization of CIA involved X-ray powder diffraction,Fourier transform infrared,and scanning electron microscopic analyses.Batch adsorption processes were conducted to evaluate the adsorption characteristics of CIA,with focuses on the effects of contact time,initial dye concentration,pH,and temperature.The molecularly imprinted polymers(MIPs)achieved removal efficiencies of 99.27%and 98.99%at equilibrium for BCG and MG adsorption,respectively.The non-imprinted polymers(NIPs)demonstrated BCG and MG adsorption efficiencies of 51.52%and 62.90%at equilibrium,respectively.Kinetic and isotherm models were employed to elucidate the BCG and MG adsorption mechanisms.The thermodynamic results indicated non-spontaneous and spontaneous reactions for BCG and MG adsorption on MIPs under the examined temperature conditions.The adsorbent exhibited sustained high removal efficiency through five reuse cycles,with no apparent reduction in adsorption performance.Validation of the adsorbent using real textile wastewater samples achieved BCG and MG removal efficiencies of 85.5%-87.5%.The adsorbent outperformed previously reported materials in BCG and MG adsorption.The synthesized CIA is a promising adsorbent for BCG and MG dye removal,contributing to water sustainability.展开更多
Molecularly imprinted polymers(MIPs)are a kind of synthetic receptors possessing wide application prospects in proteins recognition.However,there are still great challenges in proteins imprinting due to their large si...Molecularly imprinted polymers(MIPs)are a kind of synthetic receptors possessing wide application prospects in proteins recognition.However,there are still great challenges in proteins imprinting due to their large size and easy conformation change.In this study,we explored epitope-oriented MIP based on host-vip interaction(hg-MIP)and constructed a novel hg-MIP-SERS(surface-enhanced Raman scatting)approach for efficiently recognizing the terminal epitopes of neuron-specific enolase(NSE),a well-known disease biomarker for small cell lung cancer,neuroblstom,and Alzheimer's disease.The C-and N-terminal epitopes of NSE were modified with 4-(phenylazo)benzoic acid,then they were used as the templates and immobilized onβ-cyclodextrin-functionalized substrates.The imprinted layer was formed by polymerization of various functional monomers.Combined with SERS detection,an antibody-free sandwich assay based on hg-MIP was successfully used to detect the concentration of NSE in human serums,with the advantages of simple operation,small sample volume(5μL),wide linear range(1–10^(4)ng/m L)and a limit of detection as low as 0.01 ng/m L.The developed epitope-oriented hg-MIP-SERS approach can also be extended to other proteins,expanding the imprinting method of proteins,and has a broad development space in the field of protein separation and detection.展开更多
Quantitative determination of tetracycline(TC)in environment and foods is of great importance,as excessive residues might have negative effects on human health and environmental risks.Herein,a selfpowered molecularly ...Quantitative determination of tetracycline(TC)in environment and foods is of great importance,as excessive residues might have negative effects on human health and environmental risks.Herein,a selfpowered molecularly imprinted photoelectrochemical(PEC)sensor based on the Zn O/C photoanode and the Fe-doped CuBi_(2)O_(4)(CBFO)photocathode is developed for the sensitive detection of TC.The photocathodic current can be amplified by the efficient electron transfer caused by the Fermi energy level gap between the photoanode and photocathode.Furthermore,molecularly imprinted polymers(MIPs)at photocathode can selectivity identify the TC templates and thus improve the specificity.Under the optimal conditions,the sensor has a linear range of 10^(-2)-1.0×10^(5) nmol/L,and a limit of detection(LOD)of 0.007 nmol/L(S/N=3).More crucially,the milk sample detection is carried out using the as-prepared sensor,and the outcome is satisfactory.The research gives us a novel sensing platform for quick and accurate antibiotic(like TC)in environment and food monitoring.展开更多
A sensitive, fast and low-cost molecular imprinted polymeric sensor for quantitative determination of parathion was prepared with chitosan（CS） as function matrix and parathion（PT） as template molecule via constant...A sensitive, fast and low-cost molecular imprinted polymeric sensor for quantitative determination of parathion was prepared with chitosan（CS） as function matrix and parathion（PT） as template molecule via constant potential electrochemical deposition. Sensitive response was obtained with a detection limit of 1.0× 10-7 mol/L and an excellent recognition for PT was achieved due to the good memory capacity of the sensor. The developed sensor exhibited good fabrication reproducibility and acceptable stability, which provided a new promising tool for pesticide analysis.展开更多
Tetracycline selective electrode using molecularly imprinted polymer particles as quasi-ionophore was constructed the first time, and its performance was carefully characterized. Due to the specific recognition of tet...Tetracycline selective electrode using molecularly imprinted polymer particles as quasi-ionophore was constructed the first time, and its performance was carefully characterized. Due to the specific recognition of tetracycline by the particles, the selectivity coefficients for routine interferences were less than 10-4. Benefited from the absence of tetracycline in the sensitive membrane and the optimized composition of the inner filling solution, the limit of detection of the electrode was reduced to about 2.5 × 10^-8 mol/ L. It exhibited a good electrode slope 57.6 mV/decade near the theoretical Nernstian one, with a wide linear working range from 6.0 × 10^-8 to 1.0 × 10^-3 mol/L. The fabricated electrode should be used in pH 2--4, response time of which was less than 200 s when the concentration of tetracycline was higher than 1.0 × 10^-6 mol/L and no more than 30 min at the concentration of 1.0 × 10^-8 mol/L.展开更多
The interaction process between the phenobarbital（PHN） and acrylamide（AM） was studied using the M062X/6-31G（d,p） method. The PHN and AM were used as the template and functional monomer,respectively. The molecula...The interaction process between the phenobarbital（PHN） and acrylamide（AM） was studied using the M062X/6-31G（d,p） method. The PHN and AM were used as the template and functional monomer,respectively. The molecular electrostatic potential（MEP） was simulated for predicting the reactive sites. The atoms in molecules theory helped to reveal the imprinting mechanism and optimize the molar ratios for PHN and AM. The molecular imprinted polymers（MIPs） containing PHN were synthesized through the precipitation polymerization. The diameter range of the obtained MIPs was from 150 to 390 nm. According to the computational results,MIPs with the molar ratio of PHN and AM equal to 1：6 showed high selective adsorption for PHN. The apparent maximum adsorption quantity（Q_（max）） of MIPs toward PHN was 7.9 mg/g,and the Qmax of nonimprinted polymer microspheres（NIPs） was 3.2 mg/g. Herein,the studies can provide theoretical and experimental references for the controllable fabrication of MIPs.展开更多
Molecular imprinting chiral stationary phase against Cbz-L-Serine (Cbz-L-Ser) and Cbz-L-Alaine (Cbz-L-Ala) were prepared utilizing acrylamide + 2-vinylpyridine as combined basic functional monomers. Cross-selectivity ...Molecular imprinting chiral stationary phase against Cbz-L-Serine (Cbz-L-Ser) and Cbz-L-Alaine (Cbz-L-Ala) were prepared utilizing acrylamide + 2-vinylpyridine as combined basic functional monomers. Cross-selectivity was used to obtain simultaneous chiral separations of Cbz-DL-Ser and Cbz-DL-Ala by connecting two columns packed with Cbz-L-Ser and Cbz-L-Ala imprinted chiral stationary phase, respectively.展开更多
Molecular imprinting of theophylline in poly(methacrylic acid-ethylene dimethacrylate)as CEC stationary phases was synthesized by an in situ photo-initiated polymerization reaction.The effect of electrolyte pH on xant...Molecular imprinting of theophylline in poly(methacrylic acid-ethylene dimethacrylate)as CEC stationary phases was synthesized by an in situ photo-initiated polymerization reaction.The effect of electrolyte pH on xanthine derivatives and the stability of MIP column performance were investigated.the relative standard deviation(D RS)of migration time of five consecutive runs on MIP column was in the range of 2.2%–3.1%.The reproducibility of migration time column to column of M(A)was in the range of 3.8%–4.9%.The highest column efficiency was more than 140000 plates per meter.The MIP capillaries had showed better selective for theophylline,which comparing with the reference column.The urine sample was separated by spiked 5×10^(-4)mol·L^(-1)theophylline.展开更多
Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（a...Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.展开更多
A new bovine serum albumin （BSA） surface imprinting method was developed by the incorporation of quantum dots （QDs） into molecularly imprinted polymers （MIP）, which can offer shape selectivity. Preparation and a...A new bovine serum albumin （BSA） surface imprinting method was developed by the incorporation of quantum dots （QDs） into molecularly imprinted polymers （MIP）, which can offer shape selectivity. Preparation and adsorption conditions were optimized. Physical appearance of the QDs and QDs-MIP particles was illustrated by scanning electron microscope images. Photoluminescence emission of CdS was quenched when rebinding of the template.The quenching of photoluminescence emissions is presumably due to the fluorescence resonance energy transfer between quantum dots and BSA template molecules. The adsorption is compiled with Langmuir isotherm, and chemical adsorption is the rate-controlling step.The maximum adsorption capacity could reach 226.0 mg/g, which is 142.4 mg/g larger than that of undoped BSA MIP. This study demonstrates the validity of QDs coupled with MIP technology for analyzing BSA.展开更多
Neodymium ion imprinted polymer（Nd^3＋-IIP） particles for selective solid-phase extraction of Nd^3＋ were prepared and determined with inductively coupled plasma atomic emission spectrometry（ICP-AES）.The unleached...Neodymium ion imprinted polymer（Nd^3＋-IIP） particles for selective solid-phase extraction of Nd^3＋ were prepared and determined with inductively coupled plasma atomic emission spectrometry（ICP-AES）.The unleached Nd^3＋-IIP particles were prepared by the copoly-merization of Nd^3＋-5,7-dichloroquinoline-8-ol-4-vinylpyridine ternary complex with styrene and divinyl benzene, then Nd^3＋ was leached to obtain Nd^3＋-IIP particles.The adsorption capacity of the Nd3＋-IIP was 35.18 mg/g.The largest selectivity coefficient for Nd3＋ in the presence of competitive ions such as La^3＋, Ce^3＋, Pr^3＋ and Sm^3＋ was over 110.The proposed method was validated by analyzing two certified reference materials（GBW07301a sediment and GBW07401 soil） and the determined values were in a good agreement with standard values.The method was convenient, selective, sensitive and applicable to the determination of trace Nd^3＋ in environmental samples with complicated matrix.展开更多
Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological...Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravimetric analysis （TGA）, elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity （13.5 lag/mg）, high recognition ability （the imprinted factor is 3.2） and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of anapicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.展开更多
Hydrophilic molecularly imprinted polymers（MIPs） were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinti...Hydrophilic molecularly imprinted polymers（MIPs） were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinting effect and adsorption amounts of hydrophilic MIPs for tetracycline（TC） were greatly improved in water media.Furthermore,the electrochemical sensor fabricated by modifying hydrophilic MIPs on glassy carbon electrode was developed for the determination of TC in foodstuff samples.展开更多
Molecularly imprinted polymer, exhibiting considerable enantioselectivity for L-mandelic acid, was prepared using metal coordination-chelation interaction. By evaluating the recognition characteristics in the chromato...Molecularly imprinted polymer, exhibiting considerable enantioselectivity for L-mandelic acid, was prepared using metal coordination-chelation interaction. By evaluating the recognition characteristics in the chromatographic mode, the recognition interactions were proposed: specific and nonspecific metal coordination-chelation interaction and hydrophobic interaction were responsible for substrate binding on metal-complexing imprinted polymer; while the selective recognition only came from specific metal coordination-chelation interaction and specific hydrophobic interaction.展开更多
A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1...A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.展开更多
High selective molecularly imprinted polymers （MIPs） for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent, the ratio of monomer and template and the characterization of...High selective molecularly imprinted polymers （MIPs） for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent, the ratio of monomer and template and the characterization of the polymer were investigated by frontal chromatography and selectivity experiment. The results clearly indicated that the polymer, which had the highest molecular recognition abilities for tetracycline antibiotics, had been received.展开更多
基金Research supported by The Analysis & Test Fund of Zhejiang Province.
文摘L-carnitine selective polymers were prepared by molecular imprinting using methacrylic acid as the functional monomer. The acid function of the monomer is expected to form hydrogen bond and ionic interactions with the amine function of the target molecule L-carnitine. The imprinted polymers were used as stationary phases in high-performance liquid chromatography (HPLC). It was shown that L-carnitine imprinted polymer exhibited a higher affinity to its template molecule, while the non-imprinted polymer had no affinity to the compounds tested. Racemic carnitine hydrochloride was efficiently resolved on the L-carnitine imprinted polymer, and the separation factor is 1.9.
基金Project (No. 29775025) supported by the National Natural Science Foundation of China.
文摘Molecular imprinting polymers (MIPs) against N-Cbz-L-Tyr were prepared utilizing different polymer systems and evaluated in HPLC mode. It was found that MIP utilizing cocktail functional monomers, acrylamide + 2-vinylpyridine showed better molecular recognition and better separation ability for the template molecule than those utilizing other functional monomers. MIP utilizing trimethylolpropane trimethacrylate as cross-linker showed higher load capacity and separation factor than those utilizing ethylene glycol dimethacrylate as cross-linker. Increasing the concentration of competing solvent, acetic acid weakened me ionic interaction and hydrogen bonding between the analyte and the functional monomers, 2-vinylpyridine and acrylamide, when me template enantiomer was separated by HPLC. Therefore increasing of the concentration of acetic acid leads to decreasing of capacity factor, separation factor and resolution.
基金supported by the National Natural Science Foundation of China(Nos.32301259,32101228,32271527 and 32371536)the“Pioneer”and“Leading Goose”R&D Program of Zhejiang(Nos.2022C02023 and 2023C02015)+1 种基金the Research Foundation of Talented Scholars of Zhejiang A&F University(No.2021LFR058)the Dean-ship of Scientific Research at Northern Border University,Arar,KSA for funding this research work through the project number“NBU-FPEJ-2024-177-01”.
文摘As a typical bioflavonoid,diosmetin is desirable in the field of natural medicine,healthy food,and cosmetics by anti-cancer,antibacterial,antioxidant,estrogen-like and anti-inflammatory activities,and it comes from a wide range of sources in traditional Chinese medicine like spider fragrance,spearmint and chrysanthemum,as well as in Citrus fruit.However,traditional analytical methods such as silica gel column chromatography face multiple challenges in the selective extraction of diosmetin from biological materials and traditional Chinese medicinal materials.Therefore,it is urgent to develop a new type of absorbent with high efficiency,recyclability and good specificity to diosmetin.In this investigation,a magnetic surface molecularly imprinted polymer(labeled as Diosmetin/SMIPs)was synthesized employing magnetic nanoparticles as the carrier and 4-vinylpyridinyl(4-VP)as the functional monomer by surface imprinting technology.The functional monomer was screened by the binding energy(△E)between functional monomers and template molecules via computational simulation.The Diosmetin/SMIPs had a high level of specific recognition and adsorption capability towards diosmetin with a 20.25 mg g^(-1) adsorption capacity and an imprinting factor(IF)of 2.28.Additionally,it demonstrated excellent regeneration performance with 8 adsorption/desorption cycles.In addition,91.20%-94.16% of spiked diosmetin was recovered from the lemon peel samples.The strategy of constructing Diosmetin/SMIPs based on computational simulation can effectively enhance the specific adsorption performance of diosmetin.Meanwhile,Diosmetin/SMIPs synthesized by imprinting polymerization showed excellent anti-interference and reusability,and realized efficient targeted extraction of diosmetin from lemon peel samples.The results of this investigation provide a promising adsorbent for selective enrichment of diosmetin from Citrus fruit and complicated materials.
文摘In this work,by combining the specific selectivity of molecularly imprinted polymer(MIP)with a simple and sensitive electrochemiluminescence(ECL)detection method,a molecularly imprinted ECL sensor for kanamycin(KA)was developed.The MIP film was synthesized on the surface of gold electrode via electrochemical polymerization,using pyrrole(PY)as the functional monomer and KA as the template molecule.The commonly used luminescent reagent Ru(bpy)32+was employed as the ECL probe,and its co-reagent tripropylamine(TPA)was added to enhance the detection sensitivity of the sensor.Quantitative analysis of KA was performed by evaluating the difference in ECL responses between MIP film electrodes after KA removal and KA rebinding.The sensor exhibited high selectivity,good reproducibility,and stability toward KA,with a linear range of 5.00×10^(-8) to 1.00×10^(-5) mol·L^(-1) and a limit of detection of 1.67×10^(-8) mol·L^(-1)(S/N=3).This work would provide a new idea for the development of simple and sensitive molecularly imprinted ECL sensors.
文摘Bromocresol green(BCG)and malachite green(MG)are water-soluble toxic organic dyes with adverse health and environmental implications.This study presented a conjugate imprinted adsorbent(CIA)synthesized by incorporating trimethoprim vanillin ligand into a highly crosslinked polymer,designed for the efficient removal of BCG and MG from wastewater.Characterization of CIA involved X-ray powder diffraction,Fourier transform infrared,and scanning electron microscopic analyses.Batch adsorption processes were conducted to evaluate the adsorption characteristics of CIA,with focuses on the effects of contact time,initial dye concentration,pH,and temperature.The molecularly imprinted polymers(MIPs)achieved removal efficiencies of 99.27%and 98.99%at equilibrium for BCG and MG adsorption,respectively.The non-imprinted polymers(NIPs)demonstrated BCG and MG adsorption efficiencies of 51.52%and 62.90%at equilibrium,respectively.Kinetic and isotherm models were employed to elucidate the BCG and MG adsorption mechanisms.The thermodynamic results indicated non-spontaneous and spontaneous reactions for BCG and MG adsorption on MIPs under the examined temperature conditions.The adsorbent exhibited sustained high removal efficiency through five reuse cycles,with no apparent reduction in adsorption performance.Validation of the adsorbent using real textile wastewater samples achieved BCG and MG removal efficiencies of 85.5%-87.5%.The adsorbent outperformed previously reported materials in BCG and MG adsorption.The synthesized CIA is a promising adsorbent for BCG and MG dye removal,contributing to water sustainability.
基金supported by Open Project of State Key Laboratory of Supramolecular Structure and Materials,Jilin University,China(No.sklssm2024018)。
文摘Molecularly imprinted polymers(MIPs)are a kind of synthetic receptors possessing wide application prospects in proteins recognition.However,there are still great challenges in proteins imprinting due to their large size and easy conformation change.In this study,we explored epitope-oriented MIP based on host-vip interaction(hg-MIP)and constructed a novel hg-MIP-SERS(surface-enhanced Raman scatting)approach for efficiently recognizing the terminal epitopes of neuron-specific enolase(NSE),a well-known disease biomarker for small cell lung cancer,neuroblstom,and Alzheimer's disease.The C-and N-terminal epitopes of NSE were modified with 4-(phenylazo)benzoic acid,then they were used as the templates and immobilized onβ-cyclodextrin-functionalized substrates.The imprinted layer was formed by polymerization of various functional monomers.Combined with SERS detection,an antibody-free sandwich assay based on hg-MIP was successfully used to detect the concentration of NSE in human serums,with the advantages of simple operation,small sample volume(5μL),wide linear range(1–10^(4)ng/m L)and a limit of detection as low as 0.01 ng/m L.The developed epitope-oriented hg-MIP-SERS approach can also be extended to other proteins,expanding the imprinting method of proteins,and has a broad development space in the field of protein separation and detection.
基金supported by the Fuxiaquan Collaborative Innovation Platform(No.K30001)Major Scientific Research Program for Young and Middle-aged Health Professionals of Fujian Province,China(No.2022ZQNZD007)Youth Innovation Technology Project of Higher School in Shandong Province(Food Nanotechnology Innovation Team)。
文摘Quantitative determination of tetracycline(TC)in environment and foods is of great importance,as excessive residues might have negative effects on human health and environmental risks.Herein,a selfpowered molecularly imprinted photoelectrochemical(PEC)sensor based on the Zn O/C photoanode and the Fe-doped CuBi_(2)O_(4)(CBFO)photocathode is developed for the sensitive detection of TC.The photocathodic current can be amplified by the efficient electron transfer caused by the Fermi energy level gap between the photoanode and photocathode.Furthermore,molecularly imprinted polymers(MIPs)at photocathode can selectivity identify the TC templates and thus improve the specificity.Under the optimal conditions,the sensor has a linear range of 10^(-2)-1.0×10^(5) nmol/L,and a limit of detection(LOD)of 0.007 nmol/L(S/N=3).More crucially,the milk sample detection is carried out using the as-prepared sensor,and the outcome is satisfactory.The research gives us a novel sensing platform for quick and accurate antibiotic(like TC)in environment and food monitoring.
基金Supported by the National Natural Science Foundation of China(Nos20575023, 20955001)the Key Project of International Cooperation Foundation of Fujian Province, China(No2006I0021)the Natural Science Foundation of Fujian Province, China(NosD0710017, D0810016 and U0850008)
文摘A sensitive, fast and low-cost molecular imprinted polymeric sensor for quantitative determination of parathion was prepared with chitosan（CS） as function matrix and parathion（PT） as template molecule via constant potential electrochemical deposition. Sensitive response was obtained with a detection limit of 1.0× 10-7 mol/L and an excellent recognition for PT was achieved due to the good memory capacity of the sensor. The developed sensor exhibited good fabrication reproducibility and acceptable stability, which provided a new promising tool for pesticide analysis.
基金Financial supports from Ningbo Science and Technology Bureau(No.2007C10061)Department of Education of Zhejiang Province(No.20070963)Science and Technology Department of Zhejiang Province of China(No. 2008R40G2070056) are gratefully acknowledged
文摘Tetracycline selective electrode using molecularly imprinted polymer particles as quasi-ionophore was constructed the first time, and its performance was carefully characterized. Due to the specific recognition of tetracycline by the particles, the selectivity coefficients for routine interferences were less than 10-4. Benefited from the absence of tetracycline in the sensitive membrane and the optimized composition of the inner filling solution, the limit of detection of the electrode was reduced to about 2.5 × 10^-8 mol/ L. It exhibited a good electrode slope 57.6 mV/decade near the theoretical Nernstian one, with a wide linear working range from 6.0 × 10^-8 to 1.0 × 10^-3 mol/L. The fabricated electrode should be used in pH 2--4, response time of which was less than 200 s when the concentration of tetracycline was higher than 1.0 × 10^-6 mol/L and no more than 30 min at the concentration of 1.0 × 10^-8 mol/L.
基金Supported by the Science and Technology Development Program of Jilin Province(Nos.20150101018JC and 20130206099SF)the National Natural Science Foundation of China(Nos.21302062 and 21563002)
文摘The interaction process between the phenobarbital（PHN） and acrylamide（AM） was studied using the M062X/6-31G（d,p） method. The PHN and AM were used as the template and functional monomer,respectively. The molecular electrostatic potential（MEP） was simulated for predicting the reactive sites. The atoms in molecules theory helped to reveal the imprinting mechanism and optimize the molar ratios for PHN and AM. The molecular imprinted polymers（MIPs） containing PHN were synthesized through the precipitation polymerization. The diameter range of the obtained MIPs was from 150 to 390 nm. According to the computational results,MIPs with the molar ratio of PHN and AM equal to 1：6 showed high selective adsorption for PHN. The apparent maximum adsorption quantity（Q_（max）） of MIPs toward PHN was 7.9 mg/g,and the Qmax of nonimprinted polymer microspheres（NIPs） was 3.2 mg/g. Herein,the studies can provide theoretical and experimental references for the controllable fabrication of MIPs.
文摘Molecular imprinting chiral stationary phase against Cbz-L-Serine (Cbz-L-Ser) and Cbz-L-Alaine (Cbz-L-Ala) were prepared utilizing acrylamide + 2-vinylpyridine as combined basic functional monomers. Cross-selectivity was used to obtain simultaneous chiral separations of Cbz-DL-Ser and Cbz-DL-Ala by connecting two columns packed with Cbz-L-Ser and Cbz-L-Ala imprinted chiral stationary phase, respectively.
基金Supported by the National Nature Science Foundation of China(20375028)the Research Fund for the National High Technology Development“863”of China(2002AA2Z2004)
文摘Molecular imprinting of theophylline in poly(methacrylic acid-ethylene dimethacrylate)as CEC stationary phases was synthesized by an in situ photo-initiated polymerization reaction.The effect of electrolyte pH on xanthine derivatives and the stability of MIP column performance were investigated.the relative standard deviation(D RS)of migration time of five consecutive runs on MIP column was in the range of 2.2%–3.1%.The reproducibility of migration time column to column of M(A)was in the range of 3.8%–4.9%.The highest column efficiency was more than 140000 plates per meter.The MIP capillaries had showed better selective for theophylline,which comparing with the reference column.The urine sample was separated by spiked 5×10^(-4)mol·L^(-1)theophylline.
文摘Dummy molecularly imprinted polymers （DMIPs） for 4-（methylnitrosamino）-1-（3-pyridyl）-1-butanol （NNAL） were produced using three structural analogues as dummy template molecules. The chosen analogues were 4-（acetymethylamino）-1-（3-pyridyl）-butanol, 4- （methylamino）-1-（3-pyridyl）-1-butanol, and 1-（3-pyridyl）-1,4,-butanediol. The molecular recognition characteristics of the produced polymers were evaluated by X-ray photoelec- tron spectroscopy （XPS） and Fourier transform infrared spectroscopy （FT-IR）. Interactions between NNAL and methacrylic acid should be cooperative hydrogen bonds while the ni- trogen atom of the pyridine ring and the oxygen atom of the nitroso group in NNAL are two of the hydrogen-bond acceptors. It was further demonstrated that DMIP synthesized by 4-（acetymethylamino）-1-（3-pyridyl）-butanol had the best binding performance by XPS and FT-IR. Then dummy molecularly imprinted solid phase extraction （DMISPE） was developed for the determination of the analyte using the hit polymer as the sorbing material. Under optimal conditions, the recovery of NNAL dissolved in standard solution reached 93%. And the investigated polymer exhibited much higher binding of NNAL when nicotine was acted as the competitive molecule. Also the proposed method was applied to the measurement of NNAL spiked in blank urine samples with recoveries ranging from 87.2% to 101.2%.
基金This work was supported by the National Natural Science Foundation of China （No.20405013）.
文摘A new bovine serum albumin （BSA） surface imprinting method was developed by the incorporation of quantum dots （QDs） into molecularly imprinted polymers （MIP）, which can offer shape selectivity. Preparation and adsorption conditions were optimized. Physical appearance of the QDs and QDs-MIP particles was illustrated by scanning electron microscope images. Photoluminescence emission of CdS was quenched when rebinding of the template.The quenching of photoluminescence emissions is presumably due to the fluorescence resonance energy transfer between quantum dots and BSA template molecules. The adsorption is compiled with Langmuir isotherm, and chemical adsorption is the rate-controlling step.The maximum adsorption capacity could reach 226.0 mg/g, which is 142.4 mg/g larger than that of undoped BSA MIP. This study demonstrates the validity of QDs coupled with MIP technology for analyzing BSA.
文摘Neodymium ion imprinted polymer（Nd^3＋-IIP） particles for selective solid-phase extraction of Nd^3＋ were prepared and determined with inductively coupled plasma atomic emission spectrometry（ICP-AES）.The unleached Nd^3＋-IIP particles were prepared by the copoly-merization of Nd^3＋-5,7-dichloroquinoline-8-ol-4-vinylpyridine ternary complex with styrene and divinyl benzene, then Nd^3＋ was leached to obtain Nd^3＋-IIP particles.The adsorption capacity of the Nd3＋-IIP was 35.18 mg/g.The largest selectivity coefficient for Nd3＋ in the presence of competitive ions such as La^3＋, Ce^3＋, Pr^3＋ and Sm^3＋ was over 110.The proposed method was validated by analyzing two certified reference materials（GBW07301a sediment and GBW07401 soil） and the determined values were in a good agreement with standard values.The method was convenient, selective, sensitive and applicable to the determination of trace Nd^3＋ in environmental samples with complicated matrix.
基金financially supported by the National Natural Science Foundation of China (Nos. 81573391 and 81173024)the National Key Projects of China (No. 812277802)
文摘Surface molecularly imprinted polymers （SMIPs） for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, thermogravimetric analysis （TGA）, elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity （13.5 lag/mg）, high recognition ability （the imprinted factor is 3.2） and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of anapicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.
基金financed by the Entry-Exit Inspection and Quarantine Bureau of PRC(Nos.2006IK152,2009IK 130 and 200910085)
文摘Hydrophilic molecularly imprinted polymers（MIPs） were prepared using tetracycline as template,methacrylic acid as monomer and glycidilmethacrylate as pro-hydrophilic co-monomer.Compared with common MIPs,the imprinting effect and adsorption amounts of hydrophilic MIPs for tetracycline（TC） were greatly improved in water media.Furthermore,the electrochemical sensor fabricated by modifying hydrophilic MIPs on glassy carbon electrode was developed for the determination of TC in foodstuff samples.
文摘Molecularly imprinted polymer, exhibiting considerable enantioselectivity for L-mandelic acid, was prepared using metal coordination-chelation interaction. By evaluating the recognition characteristics in the chromatographic mode, the recognition interactions were proposed: specific and nonspecific metal coordination-chelation interaction and hydrophobic interaction were responsible for substrate binding on metal-complexing imprinted polymer; while the selective recognition only came from specific metal coordination-chelation interaction and specific hydrophobic interaction.
基金Project(17ZYPTJC00050)supported by Science and Technology Committee of Tianjin,ChinaProject(2017YFC1600803)supported by the Ministry of Science and Technology of China
文摘A novel molecularly imprinted polymer (MIP) based on upconversion nanoparticles (UCNPs) was successfully synthesized for determination of Ochratoxin A (OTA). The MIP was developed on the silica-coated UCNPs using N-(1-hydroxy-2-naphthoyl amido)-(L)-phenylalanine (HNA-Phe) as the alternative template. The final composite combined the advantages of the high selectivity of MIP with the high fluorescence intensity of UCNPs which was selective and sensitive to OTA. Under the optimal condition, the fluorescence intensity of UCNPs@SiO2@MIP decreases linearly when the concentration of OTA increases from 0.05 to 1.0 mg/L. The detection limit of OTA with the method was 0.031 mg/L. At three spiked concentration levels (50, 100 and 200 μg/kg), the recovery ranges of OTA in corn, rice and feed are 88.0%–91.6%, 80.2%–91.6% and 89.2%–90.4%, respectively.
文摘High selective molecularly imprinted polymers （MIPs） for tetracycline have been prepared by precipitation polymerization. Effects of monomer and solvent, the ratio of monomer and template and the characterization of the polymer were investigated by frontal chromatography and selectivity experiment. The results clearly indicated that the polymer, which had the highest molecular recognition abilities for tetracycline antibiotics, had been received.
