Axisymmetric fundamental solutions that are applied in the consolidation calculations of a finite clay layer with impeded boundaries were derived. Laplace and Hankel integral transforms were utilized with respect to t...Axisymmetric fundamental solutions that are applied in the consolidation calculations of a finite clay layer with impeded boundaries were derived. Laplace and Hankel integral transforms were utilized with respect to time and radial coordinates, respectively in the analysis. The derivation of fundamental solutions considers two boundary value problems involving unit point loading and ring loading in the vertical. The solutions are extended to circular distributed and strip distributed normal load. The computation and analysis of settlements, vertical total stress and excess pore pressure in the consolidation layer subject to circular loading are presented.展开更多
On the basis of Terzaghi's one-dimensional consolidation theory, the variation of effective stress ratio in layered saturated soils with impeded boundaries under time-dependent loading was studied. By the method o...On the basis of Terzaghi's one-dimensional consolidation theory, the variation of effective stress ratio in layered saturated soils with impeded boundaries under time-dependent loading was studied. By the method of Laplace transform, the solution was presented. Influences of different kinds of cyclic loadings and impeded boundaries conditions were discussed. Through numerical inversion of Laplace transform, useful illustrations were given considering several common time-dependent loadings. Pervious or impervious boundary condition is just the special case of the problem considered here. Compared with average index method,the results from the method illustrated are more accurate.展开更多
The green innovation value chain is a key step in transforming green,innovative scientific,and technological achievements into productive forces.The establishment of green innovation value chains based on value distri...The green innovation value chain is a key step in transforming green,innovative scientific,and technological achievements into productive forces.The establishment of green innovation value chains based on value distribution rather than technical conditions can effectively overcome the common bottleneck faced by different nations during their green innovation endeavors,namely,the substitution of conventional products with green alternatives.This study investigates the impeded diffusion of green products and their underlying causes,analyzes the internal structure and mechanism of the green innovation value chain,and explores the establishment of regional green innovation value chains and the models available for value chain upgrading.展开更多
Interfacial solar evaporation holds immense potential for brine desalination with low carbon footprints and high energy utilization.Hydrogels,as a tunable material platform from the molecular level to the macroscopic ...Interfacial solar evaporation holds immense potential for brine desalination with low carbon footprints and high energy utilization.Hydrogels,as a tunable material platform from the molecular level to the macroscopic scale,have been considered the most promising candidate for solar evaporation.However,the simultaneous achievement of high evaporation efficiency and satisfactory tolerance to salt ions in brine remains a challenging scientific bottleneck,restricting the widespread application.Herein,we report ionization engineering,which endows polymer chains of hydrogels with electronegativity for impeding salt ions and activating water molecules,fundamentally overcoming the hydrogel salt-impeded challenge and dramatically expediting water evaporating in brine.The sodium dodecyl benzene sulfonate-modified carbon black is chosen as the solar absorbers.The hydrogel reaches a ground-breaking evaporation rate of 2.9 kg m−2 h−1 in 20 wt%brine with 95.6%efficiency under one sun irradiation,surpassing most of the reported literature.More notably,such a hydrogel-based evaporator enables extracting clean water from oversaturated salt solutions and maintains durability under different high-strength deformation or a 15-day continuous operation.Meantime,on the basis of the cation selectivity induced by the electronegativity,we first propose an all-day system that evaporates during the day and generates salinity-gradient electricity using waste-evaporated brine at night,anticipating pioneer a new opportunity for all-day resource-generating systems in fields of freshwater and electricity.展开更多
Although previous studies have demonstrated that transcranial focused ultrasound stimulation protects the ischemic brain,clear criteria for the stimulation time window and intensity are lacking.Electrical impedance to...Although previous studies have demonstrated that transcranial focused ultrasound stimulation protects the ischemic brain,clear criteria for the stimulation time window and intensity are lacking.Electrical impedance tomography enables real-time monitoring of changes in cerebral blood perfusion within the ischemic brain,but investigating the feasibility of using this method to assess post-stroke rehabilitation in vivo remains critical.In this study,ischemic stroke was induced in rats through middle cerebral artery occlusion surgery.Transcranial focused ultrasound stimulation was used to treat the rat model of ischemia,and electrical impedance tomography was used to measure impedance during both the acute stage of ischemia and the rehabilitation stage following the stimulation.Electrical impedance tomography results indicated that cerebral impedance increased after the onset of ischemia and decreased following transcranial focused ultrasound stimulation.Furthermore,the stimulation promoted motor function recovery,reduced cerebral infarction volume in the rat model of ischemic stroke,and induced the expression of brain-derived neurotrophic factor in the ischemic brain.Our results also revealed a significant correlation between the impedance of the ischemic brain post-intervention and improvements in behavioral scores and infarct volume.This study shows that daily administration of transcranial focused ultrasound stimulation for 20 minutes to the ischemic hemisphere 24 hours after cerebral ischemia enhanced motor recovery in a rat model of ischemia.Additionally,our findings indicate that electrical impedance tomography can serve as a valuable tool for quantitatively evaluating rehabilitation after ischemic stroke in vivo.These findings suggest the feasibility of using impedance data collected via electrical impedance tomography to clinically assess the effects of rehabilitatory interventions for patients with ischemic stroke.展开更多
Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the elec...Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.展开更多
This paper presents a programmable frequency scan algorithm based on harmonic balance.The core idea involves treating systems under perturbation as nonlinear time-periodic(NTP)systems.Steady-state harmonics are first ...This paper presents a programmable frequency scan algorithm based on harmonic balance.The core idea involves treating systems under perturbation as nonlinear time-periodic(NTP)systems.Steady-state harmonics are first solved via Newton-Raphson iteration through a set of nonlinear equations,and then input-output variables are selected to estimate the linear transfer function of the original NTP system without perturbations.The applications and insights of the proposed algorithm are discussed,particularly in guiding existing frequency scan algorithms,which are restricted by time-domain signal generation or measurement.This improvement is achieved through linear stability analysis of NTP systems with perturbations.展开更多
In the future power-electronics-dominated power systems,grid-forming(GFM)converters have been regarded as important devices to actively establish frequency and voltage,so as to provide essential grid support.However,d...In the future power-electronics-dominated power systems,grid-forming(GFM)converters have been regarded as important devices to actively establish frequency and voltage,so as to provide essential grid support.However,due to their voltage source behavior and emulated swing dynamics,GFM converters may encounter low-frequency oscillations(LFOs)when connected to strong grids,which belongs to the self-stability problem of GFM converters.Moreover,GFM converters will also interact with grid-following(GFL)converters and thus impact the mid-frequency oscillations(MFOs)induced by phase-locked loops(PLLs).It has been preliminarily shown in the literature that GFM converters can help stabilize the PLL-induced MFOs,but currently,there is a lack of systematic design methods to coordinate the self-stability and stabilizing ability of GFM converters.This paper addresses this gap by revisiting the impedance model of a typical GFM converter and briefly analyze the oscillations caused by converters.Based on our analysis,we propose a frequency-partitioned synthesis design framework to enable dynamic virtual impedance(DVI)in GFM converters,aiming to enhance their self-stability and stabilizing ability simultaneously.Particularly,a self-stabilizing module is designed to ensure robust device-level damping,with control parameters auto-tuned using H∞methods.In parallel,a stabilizing module is introduced to stabilize GFL converters and enhance the system-level stability,which utilizes a perceive-and-optimize tuning strategy.Simulation results validate the effectiveness of the proposed synthesis DVI framework.展开更多
In a rapid cycling synchrotron(RCS),the magnetic field is synchronized with the beam energy,creating a highly dynamic magnetic environment.A ceramic chamber with a shielding layer(RF shield),composed of a series of co...In a rapid cycling synchrotron(RCS),the magnetic field is synchronized with the beam energy,creating a highly dynamic magnetic environment.A ceramic chamber with a shielding layer(RF shield),composed of a series of copper strips connected to a capacitor at either end,is typically employed as a vacuum chamber to mitigate eddy current effects and beam coupling impedance.Consequently,the ceramic chamber exhibits a thin-walled multilayered complex structure.Previous theoretical studies have suggested that the impedance of such a structure has a negligible impact on the beam.However,recent impedance measurements of the ceramic chamber in the China Spallation Neutron Source(CSNS)RCS revealed a resonance in the low-frequency range,which was confirmed by further theoretical analysis as a source of beam instability in the RCS.Currently,the magnitude of this impedance cannot be accurately assessed using theoretical calculations.In this study,we used the CST Microwave Studio to confirm the impedance of the ceramic chamber.Further simulations covering six different types of ceramic chambers were conducted to develop an impedance model in the RCS.Additionally,this study investigates the resonant characteristics of the ceramic chamber impedance,finding that the resonant frequency is closely related to the capacitance of the capacitors.This finding provides clear directions for further impedance optimization and is crucial for achieving a beam power of 500 kW for the CSNS Phase-Ⅱ project(CSNS-Ⅱ).However,careful attention must be paid to the voltage across the capacitors.展开更多
This study proposes a multimodal deep learning framework for joint prediction of the state of health(SOH)and remaining useful life(RUL)of lithium-ion batteries.Twelve representative impedance features-covering charge-...This study proposes a multimodal deep learning framework for joint prediction of the state of health(SOH)and remaining useful life(RUL)of lithium-ion batteries.Twelve representative impedance features-covering charge-transfer resistance,solid electrolyte interface(SEI)layer impedance,and ion diffusion-are extracted from electrochemical impedance spectroscopy(EIS)and combined with short voltage/current segments to form a compact,interpretable feature set.A residual multi-layer perceptron(ResMLP)is employed for SOH regression,and a temporal convolutional network with attention(TCNAttention)is used for RUL estimation.Lifetime experiments on two battery types with different chemistries and form factors,evaluated through three rounds of paired cross-validation,validate the approach.Results show that the proposed features significantly reduce dimensionality and computational cost while substantially lowering SOH error,achieving an average normalized root mean square error of 2.3%.The RUL prediction reaches an average error of 14.8%.Overall,the framework balances interpretability,robustness,and feasibility,providing a practical solution for battery management systems(BMS)monitoring and life prediction.展开更多
The demand for high-temperature electromagnetic wave absorption(EWA)materials has significantly increased alongside advancements in aerospace and communication technologies.Although traditional magnetic absorbers,such...The demand for high-temperature electromagnetic wave absorption(EWA)materials has significantly increased alongside advancements in aerospace and communication technologies.Although traditional magnetic absorbers,such as ferrites and metal powders,show excellent magnetic loss performance at room temperature,they have significant limitations in harsh environments due to their high density,low Curie temperature,and susceptibility to oxidation.In contrast,carbon-containing materials have emerged as promising candidates for high-temperature EWA applications,owing to their high melting point,low density,tunable dielectric loss mechanisms,and superior thermal stability.Unlike magnetic materials,carbon-based systems primarily dissipate electromagnetic energy through conductance loss,dipole polarization,and interfacial polarization,thereby avoiding performance degradation at elevated temperatures.However,several critical challenges remain,including insufficient oxidation resistance,mechanical reliability issues,and the need for stable impedance matching.To address these limitations,recent strategies such as defect engineering,heterointerface construction,and metamaterial design have been proposed to enhance thermal stability and functional performance.This review provides a systematic summary of recent advances in carbon-containing absorbers,with a focus on dielectric loss mechanisms,optimization strategies,and multiscale structural design principles.By elucidating the structure–property relationships of carbon materials,carbide ceramics,and novel carbon hybrids,this study aims to offer theoretical and technical guidance for the development of advanced high-temperature electromagnetic wave absorbers,thereby promoting their practical applications in aerospace and telecommunications.展开更多
Despite significant progress in fuel cell technology,its large-scale industrial application is still challenged by the frequently encountered performance failure during long-term operation.Clarifying the failure mecha...Despite significant progress in fuel cell technology,its large-scale industrial application is still challenged by the frequently encountered performance failure during long-term operation.Clarifying the failure mechanism is the key to extending the lifecycle and enhancing stability.Herein,we have developed a time and space resolved multi-field characterization,including electrochemical impedance spectroscopy,to unveil its underlying mechanism.With this operando and non-destructive characterization,the dynamic evolution of the internal mass transport,heat,and electricity field distribution is fully depicted within an industrial-scale fuel cell in operation.Thus,it is revealed that hydrogen starvation occurs in the outlet region due to the excessive hydrogen consumption during the loading-down process.This can induce local low current density and carbon corrosion,which may subsequently cause severe damage to the structure of the catalyst layer and membrane,ultimately leading to performance failure.With this understanding,we further identify a descriptor for early diagnosis to prevent any potential degradation.The methodology is of significance,which can bring fuel cell technology a step further towards industrial applications.展开更多
The pseudo-two-dimensional(P2D)model plays an important role in exploring physicochemical mechanisms,predicting the state of health,and improving the fast charge capability for Li-ion batteries(LIBs).However,the fast ...The pseudo-two-dimensional(P2D)model plays an important role in exploring physicochemical mechanisms,predicting the state of health,and improving the fast charge capability for Li-ion batteries(LIBs).However,the fast charge leads to the lithium concentration gradient in the solid and electrolyte phases and the non-uniform electrochemical reaction at the solid/electrolyte interface.In order to decouple charge transfer reactions in LIBs under dynamic conditions,understanding the spatio-temporal resolution of the P2D model is urgently required.Till now,the study of this aspect is still insufficient.This work studies the spatio-temporal resolution for dynamic/static electrochemical impedance spectroscopy(DEIS/SEIS)on multiple scales.In detail,DEIS and SEIS with spatio-temporal resolutions are used to decouple charge transfer reactions in LIBs based on the numerical solution of the P2D model in the frequency domain.The calculated results indicate that decoupling solid diffusion requires a high spatial resolution along the r-direction in particles,decoupling electrolyte diffusion and interfacial transfer reaction requires a high spatial resolution along the x-direction,and decoupling charge transfer reactions in LIBs at an extremely low state of charge(SOC)requires an extremely high temporal resolution along the t-direction.Finally,the optimal range of spatio-temporal resolutions for DEIS/SEIS is derived,and the method to decouple charge transfer reactions with spatio-temporal resolutions is developed.展开更多
Interaction between the converter and the grid may lead to harmonic oscillations.The impedance-based method is an effective way to deal with the stability issue.In this study,the impedance-based method is used to inve...Interaction between the converter and the grid may lead to harmonic oscillations.The impedance-based method is an effective way to deal with the stability issue.In this study,the impedance-based method is used to investigate the small-signal stability of a cascaded 12-pulse line-commutated converter-based high-voltage direct current(LCC-HVDC)transmission system.In the modeling part,the impedance models of the single rectifier and inverter are established respectively with consideration to the effect of frequency coupling,which has improved the accuracy of the models.Based on the models,the AC impedance models of the cascaded LCC-HVDC transmission system are established both on the rectifier and inverter side.In the stability analysis part,the stability of the system is analyzed under different working conditions.The simulation results reveal that the established impedance model can properly represent the stability of this system.The findings of this study can provide a theoretical reference for the stability design and oscillation suppression strategy of LCC-HVDC transmission systems and LCC interconnected systems.展开更多
BACKGROUND:Individualized positive end-expiratory pressure(PEEP)titration is a crucial technique in mechanical ventilation therapy for acute respiratory distress syndrome(ARDS)patients with intra-abdominal hypertensio...BACKGROUND:Individualized positive end-expiratory pressure(PEEP)titration is a crucial technique in mechanical ventilation therapy for acute respiratory distress syndrome(ARDS)patients with intra-abdominal hypertension(IAH).This study aimed to evaluate the eff ectiveness of electrical impedance tomography(EIT)-guided PEEP titration in this population.METHODS:This prospective study enrolled 36 ARDS patients,including 22 patients with IAH and 14 without IAH.All the patients underwent EIT-guided PEEP titration at the intersection point between alveolar overdistension and collapse during a decremental PEEP trial.The changes in pulmonary ventilation distribution,respiratory mechanics and hemodynamics during the titration process were observed.RESULTS:After EIT-guided PEEP titration was performed,the PEEP,peak inspiratory pressure and plateau pressure increased significantly(P<0.05).Furthermore,no significant differences were observed in respiratory system compliance,tidal volume,driving pressure,or the 4*DP+RR index between the two groups(P>0.05).The mechanical power increased in the non-IAH(NIAH)group after PEEP titration(P<0.05).Ventilation in gravity-dependent lung regions significantly increased(P<0.05),and the oxygenation index(PaO2/FiO2)improved signifi cantly(P<0.05)in both groups.However,blood pressure,heart rate,respiratory rate,central venous pressure,and lactate levels did not signifi cantly change.In the IAH group,the PaO2/FiO2 ratio improved less than that in the NIAH group did(P<0.05).CONCLUSION:In our study,individualized PEEP titration guided by EIT improved oxygenation in ARDS patients with concomitant IAH without signifi cantly aff ecting hemodynamics.The presence of IAH may limit the improvement of oxygenation during EIT-guided PEEP titration.展开更多
Developing advanced acoustic treatments,such as the Multi-Degree-of-Freedom(MDOF)septum liner,to realize the broadband noise reduction is critical for silent aeroengines.This study investigates experimentally the MDOF...Developing advanced acoustic treatments,such as the Multi-Degree-of-Freedom(MDOF)septum liner,to realize the broadband noise reduction is critical for silent aeroengines.This study investigates experimentally the MDOF septum liner and its impedance model on the Beihang Grazing Flow Duct(BGFD)setup,over a wide frequency range under grazing flows up to 0.5 Mach number and Sound Pressure Level(SPL)up to 150 dB,typically encountered in aeroengine nacelles.Several specimens varying in the numbers,types,and depths of septa among units are designed,fabricated,and measured.Their impedances and Transmission Losses(TL)are obtained using the mirror-based multimodal straightforward method and the mode decomposition technique,respectively.Generally,the model predictions show good agreement with the educed impedances in all cases,and such liners with a large-porosity facesheet exhibit low acoustic nonlinearities in the presence of high SPL,especially under high-velocity grazing flows.Moreover,a MDOF liner we delicately designed,compared with a conventional broadband three-layer perforated liner as the reference,is close to the resonant state at more frequencies and thus has higher and wider measured TL spectra almost from 1 kHz up to 10 kHz at studied Mach numbers,under the premise of saving 22.7 mm in the thickness.These show that,the MDOF septum liner,if well designed,can achieve an ultra-broadband efficient sound attenuation using more limited spaces in complex aeroacoustic environments.展开更多
Effects of thermo-mechanical Laser Shock Peening without Absorbing Coating(LSPwC)on the dual-phase structural evolution and the potential of LSPwC in the corrosion resistance of2Cr13 martensitic stainless steel were i...Effects of thermo-mechanical Laser Shock Peening without Absorbing Coating(LSPwC)on the dual-phase structural evolution and the potential of LSPwC in the corrosion resistance of2Cr13 martensitic stainless steel were investigated.A Neodymium-doped Yttrium Aluminium Garnet(Nd:YAG)laser with a pulse energy of 7.6 J was used for the LSPwC treatment.Microstructural changes were characterized using X-Ray Diffraction(XRD),Transmission Electron Microscopy(TEM)and X-ray Photoelectron Spectroscopy(XPS).Corrosion behavior was evaluated via Electrochemical Impedance Spectroscopy(EIS)and Potentiodynamic Polarization(PDP)measurements,and the morphology of corrosion pits was observed using Scanning Electron Microscopy(SEM).Results show that the LSPwC treatment led to an obvious reduction in the corrosion resistance owing to the precipitation of numerous Cr_(8)O_(21),surface roughening and tensile residual stress generated by laser ablation.However,LSPwC with subsequent treatment of slight ablation layer removal brought about 13.5 fold increase in charge transfer resistance and about 83.6% reduction of passive current density,and the significant improvement in the corrosion resistance is attributed to the Cr2O3-rich surface passive film resulting from Cr_(15.58)Fe_(7.42)C_(6)decomposition caused by LSPwC-induced mechanical effects.展开更多
α-MnO_(2) is a promising,inexpensive,and readily producible catalyst for the oxygen reduction reaction(ORR)in alkaline media,but its application is limited by low electronic conductivity.In this study,we enhance the ...α-MnO_(2) is a promising,inexpensive,and readily producible catalyst for the oxygen reduction reaction(ORR)in alkaline media,but its application is limited by low electronic conductivity.In this study,we enhance the performance ofα-MnO_(2) electrodes by systematically varying theα-MnO_(2)-to-Vulcan ratio within the catalyst layer.Electrodes are evaluated in a gas diffusion electrode(GDE)half-cell,where an optimized catalyst layer composition leads to significantly improved ORR performance.By finetuning both theα-MnO_(2)-to-Vulcan ratio and theα-MnO_(2) loading,the electrode outperforms a commercial MnO_(2)-based electrode and approaches the performance of the Pt/C benchmark.The improvement is attributed to the presence of a three-dimensional(3D)Vulcan network electronically connecting catalytically activeα-MnO_(2) sites with the substrate.Additionally,the optimized electrodes are employed in a prototype Al-O_(2) flow cell.Under constant oxygen flow,power densities exceed 250 mW cm^(-2),which is significantly higher than that of conventional Al-air batteries.Electrochemical impedance spectroscopy combined with distribution of relaxation times(DRT)analysis enables the separation of anode and cathode charge transfer impedances without the need for an additional reference electrode.The analysis reveals that the anode contributes more than twice as much impedance as the cathode,highlighting the need for further anode optimization.This work demonstrates a transferable approach for catalyst layer screening under technically relevant conditions in the GDE half-cell.Subsequent measurements in an Al-O_(2) flow cell validate the approach.The methodology is widely applicable to the development of advanced electrodes for a variety of metal-air battery technologies.展开更多
Developing effective strategies to regulate graphene’s conduction loss and polarization has become a key to expanding its application in the electromagnetic wave absorption(EMWA)field.Based on the unique energy band ...Developing effective strategies to regulate graphene’s conduction loss and polarization has become a key to expanding its application in the electromagnetic wave absorption(EMWA)field.Based on the unique energy band structure of graphene,regulating its bandgap and electrical properties by introducing heteroatoms is considered a feasible solution.Herein,metal-nitrogen doping reduced graphene oxide(M–N-RGO)was prepared by embedding a series of single metal atoms M–N_(4) sites(M=Mn,Fe,Co,Ni,Cu,Zn,Nb,Cd,and Sn)in RGO using an N-coordination atom-assisted strategy.These composites had adjustable conductivity and polarization to optimize dielectric loss and impedance matching for efficient EMWA performance.The results showed that the minimum reflection loss(RL_(min))of Fe–N-RGO reaches−74.05 dB(2.0 mm)and the maximum effective absorption bandwidth(EAB_(max))is 7.05 GHz(1.89 mm)even with a low filler loading of only 1 wt%.Combined with X-ray absorption spectra(XAFS),atomic force microscopy,and density functional theory calculation analysis,the Fe–N_(4) can be used as the polarization center to increase dipole polarization,interface polarization and defect-induced polarization due to d-p orbital hybridization and structural distortion.Moreover,electron migration within the Fe further leads to conduction loss,thereby synergistically promoting energy attenuation.This study demonstrates the effectiveness of metal-nitrogen doping in regulating the graphene′s dielectric properties,which provides an important basis for further investigation of the loss mechanism.展开更多
文摘Axisymmetric fundamental solutions that are applied in the consolidation calculations of a finite clay layer with impeded boundaries were derived. Laplace and Hankel integral transforms were utilized with respect to time and radial coordinates, respectively in the analysis. The derivation of fundamental solutions considers two boundary value problems involving unit point loading and ring loading in the vertical. The solutions are extended to circular distributed and strip distributed normal load. The computation and analysis of settlements, vertical total stress and excess pore pressure in the consolidation layer subject to circular loading are presented.
文摘On the basis of Terzaghi's one-dimensional consolidation theory, the variation of effective stress ratio in layered saturated soils with impeded boundaries under time-dependent loading was studied. By the method of Laplace transform, the solution was presented. Influences of different kinds of cyclic loadings and impeded boundaries conditions were discussed. Through numerical inversion of Laplace transform, useful illustrations were given considering several common time-dependent loadings. Pervious or impervious boundary condition is just the special case of the problem considered here. Compared with average index method,the results from the method illustrated are more accurate.
基金the part of the“Research on Paths to High-quality Development in Agriculture Against the Backdrop of Rural Revitalization,”a project of the Publicity Department of the CPC Central Committee for Young Talents in Publicity,Socialist Thought and Cultural Promotionthe National Social Science Fund of China-supported project,“Research on Theoretical Logic and Realization Path of Urban-Rural Integration Based on Industrial Internet”(21XJL001)+1 种基金the major project of Sichuan province in philosophy and social science planning,“Research on the Innovation and Policy Adaptation of Sichuan’s Agricultural Green Development System under the‘Dual Carbon’Goal”(SC22ZDYC44)the key project of Sichuan province in soft science research and planning,“Research on the Path to Peak Carbon and Carbon Neutrality of the Agricultural Sector in Rural Areas of Sichuan Province”(2022JDR0157).
文摘The green innovation value chain is a key step in transforming green,innovative scientific,and technological achievements into productive forces.The establishment of green innovation value chains based on value distribution rather than technical conditions can effectively overcome the common bottleneck faced by different nations during their green innovation endeavors,namely,the substitution of conventional products with green alternatives.This study investigates the impeded diffusion of green products and their underlying causes,analyzes the internal structure and mechanism of the green innovation value chain,and explores the establishment of regional green innovation value chains and the models available for value chain upgrading.
基金the National Natural Science Foundation of China(Grant No.52076028).
文摘Interfacial solar evaporation holds immense potential for brine desalination with low carbon footprints and high energy utilization.Hydrogels,as a tunable material platform from the molecular level to the macroscopic scale,have been considered the most promising candidate for solar evaporation.However,the simultaneous achievement of high evaporation efficiency and satisfactory tolerance to salt ions in brine remains a challenging scientific bottleneck,restricting the widespread application.Herein,we report ionization engineering,which endows polymer chains of hydrogels with electronegativity for impeding salt ions and activating water molecules,fundamentally overcoming the hydrogel salt-impeded challenge and dramatically expediting water evaporating in brine.The sodium dodecyl benzene sulfonate-modified carbon black is chosen as the solar absorbers.The hydrogel reaches a ground-breaking evaporation rate of 2.9 kg m−2 h−1 in 20 wt%brine with 95.6%efficiency under one sun irradiation,surpassing most of the reported literature.More notably,such a hydrogel-based evaporator enables extracting clean water from oversaturated salt solutions and maintains durability under different high-strength deformation or a 15-day continuous operation.Meantime,on the basis of the cation selectivity induced by the electronegativity,we first propose an all-day system that evaporates during the day and generates salinity-gradient electricity using waste-evaporated brine at night,anticipating pioneer a new opportunity for all-day resource-generating systems in fields of freshwater and electricity.
基金supported by the Fundamental Research Funds for the Central Universities,Nos.G2021KY05107,G2021KY05101the National Natural Science Foundation of China,Nos.32071316,32211530049+1 种基金the Natural Science Foundation of Shaanxi Province,No.2022-JM482the Education and Teaching Reform Funds for the Central Universities,No.23GZ230102(all to LL and HH).
文摘Although previous studies have demonstrated that transcranial focused ultrasound stimulation protects the ischemic brain,clear criteria for the stimulation time window and intensity are lacking.Electrical impedance tomography enables real-time monitoring of changes in cerebral blood perfusion within the ischemic brain,but investigating the feasibility of using this method to assess post-stroke rehabilitation in vivo remains critical.In this study,ischemic stroke was induced in rats through middle cerebral artery occlusion surgery.Transcranial focused ultrasound stimulation was used to treat the rat model of ischemia,and electrical impedance tomography was used to measure impedance during both the acute stage of ischemia and the rehabilitation stage following the stimulation.Electrical impedance tomography results indicated that cerebral impedance increased after the onset of ischemia and decreased following transcranial focused ultrasound stimulation.Furthermore,the stimulation promoted motor function recovery,reduced cerebral infarction volume in the rat model of ischemic stroke,and induced the expression of brain-derived neurotrophic factor in the ischemic brain.Our results also revealed a significant correlation between the impedance of the ischemic brain post-intervention and improvements in behavioral scores and infarct volume.This study shows that daily administration of transcranial focused ultrasound stimulation for 20 minutes to the ischemic hemisphere 24 hours after cerebral ischemia enhanced motor recovery in a rat model of ischemia.Additionally,our findings indicate that electrical impedance tomography can serve as a valuable tool for quantitatively evaluating rehabilitation after ischemic stroke in vivo.These findings suggest the feasibility of using impedance data collected via electrical impedance tomography to clinically assess the effects of rehabilitatory interventions for patients with ischemic stroke.
文摘Objective:To investigate the spatial gradient of intraoperative impedance across the cochlear electrode array in pediatric cochlear implant recipients and assess its potential as a physiological indicator for the electrode-neural interface.Methods:A prospective observational study involving 56 pediatric patients underwent cochlear implantation with Cochlear Nucleus devices.Intraoperative polarized impedance and electrically evoked compound action potential(ECAP)threshold were recorded across all 1232 electrodes using AutoNRT software.Eight electrodes with open-or short-circuit were excluded,leaving 1,224 for analysis.Impedance values were categorized by cochlear region(basal,middle,apical),and electrodes with elevated impedance(10-20 kΩ)were analyzed for regional distribution and clinical relevance.Data were analyzed for spatial patterns and correlation with the ECAP threshold profiles.Results:A consistent basal-to-apical increase in impedance was observed(7.7±1.9,9.2±1.4,10.8±1.5 kΩ;p<0.001).Impedance and ECAP threshold were weakly correlated(ρ=-0.20,p<0.001;β=-1.26,p<0.001),with a positive association in the apical region(ρ=0.12,p=0.048).Electrodes with higher impedance(1020 kΩ)were less likely to show elevated or absent TNRT(OR=0.175,p=0.02).The impedance gradient persisted across age groups and was significantly correlated with ECAP threshold patterns.Conclusion:Intraoperative impedance monitoring reveals a strong and physiologically consistent gradient,with higher values in apical electrodes.This gradient reflects anatomical and tissue interface variations,which may offer a valuable physiological indicator for intraoperative electrode positioning and neural interface integrity.
基金supported by China Southern Power Grid Corporation(036000KC23090005(GDKJXM20231027)).
文摘This paper presents a programmable frequency scan algorithm based on harmonic balance.The core idea involves treating systems under perturbation as nonlinear time-periodic(NTP)systems.Steady-state harmonics are first solved via Newton-Raphson iteration through a set of nonlinear equations,and then input-output variables are selected to estimate the linear transfer function of the original NTP system without perturbations.The applications and insights of the proposed algorithm are discussed,particularly in guiding existing frequency scan algorithms,which are restricted by time-domain signal generation or measurement.This improvement is achieved through linear stability analysis of NTP systems with perturbations.
基金supported by National Natural Science Foundation of China(U24B6008,U22B6008)State Grid Zhejiang Electric Power Co.,Ltd.Science,and Technology Project(B311DS240015).
文摘In the future power-electronics-dominated power systems,grid-forming(GFM)converters have been regarded as important devices to actively establish frequency and voltage,so as to provide essential grid support.However,due to their voltage source behavior and emulated swing dynamics,GFM converters may encounter low-frequency oscillations(LFOs)when connected to strong grids,which belongs to the self-stability problem of GFM converters.Moreover,GFM converters will also interact with grid-following(GFL)converters and thus impact the mid-frequency oscillations(MFOs)induced by phase-locked loops(PLLs).It has been preliminarily shown in the literature that GFM converters can help stabilize the PLL-induced MFOs,but currently,there is a lack of systematic design methods to coordinate the self-stability and stabilizing ability of GFM converters.This paper addresses this gap by revisiting the impedance model of a typical GFM converter and briefly analyze the oscillations caused by converters.Based on our analysis,we propose a frequency-partitioned synthesis design framework to enable dynamic virtual impedance(DVI)in GFM converters,aiming to enhance their self-stability and stabilizing ability simultaneously.Particularly,a self-stabilizing module is designed to ensure robust device-level damping,with control parameters auto-tuned using H∞methods.In parallel,a stabilizing module is introduced to stabilize GFL converters and enhance the system-level stability,which utilizes a perceive-and-optimize tuning strategy.Simulation results validate the effectiveness of the proposed synthesis DVI framework.
基金supported by the Guangdong Basic and Applied Basic Research Foundation,China(No.2021B1515140007).
文摘In a rapid cycling synchrotron(RCS),the magnetic field is synchronized with the beam energy,creating a highly dynamic magnetic environment.A ceramic chamber with a shielding layer(RF shield),composed of a series of copper strips connected to a capacitor at either end,is typically employed as a vacuum chamber to mitigate eddy current effects and beam coupling impedance.Consequently,the ceramic chamber exhibits a thin-walled multilayered complex structure.Previous theoretical studies have suggested that the impedance of such a structure has a negligible impact on the beam.However,recent impedance measurements of the ceramic chamber in the China Spallation Neutron Source(CSNS)RCS revealed a resonance in the low-frequency range,which was confirmed by further theoretical analysis as a source of beam instability in the RCS.Currently,the magnitude of this impedance cannot be accurately assessed using theoretical calculations.In this study,we used the CST Microwave Studio to confirm the impedance of the ceramic chamber.Further simulations covering six different types of ceramic chambers were conducted to develop an impedance model in the RCS.Additionally,this study investigates the resonant characteristics of the ceramic chamber impedance,finding that the resonant frequency is closely related to the capacitance of the capacitors.This finding provides clear directions for further impedance optimization and is crucial for achieving a beam power of 500 kW for the CSNS Phase-Ⅱ project(CSNS-Ⅱ).However,careful attention must be paid to the voltage across the capacitors.
基金financially supported by the National Natural Science Foundation of China(No.U22A20439)the Shenzhen Fundamental Research Program(No.JCYJ20220818100418040)+2 种基金the Guangdong-Hong Kong-Macao Joint Innovation Fund(No.2024A0505040001)the Guangdong Basic and Applied Basic Research Foundation(2023A1515011122)the Shenzhen ShowMac Network Technology Co.,Ltd.
文摘This study proposes a multimodal deep learning framework for joint prediction of the state of health(SOH)and remaining useful life(RUL)of lithium-ion batteries.Twelve representative impedance features-covering charge-transfer resistance,solid electrolyte interface(SEI)layer impedance,and ion diffusion-are extracted from electrochemical impedance spectroscopy(EIS)and combined with short voltage/current segments to form a compact,interpretable feature set.A residual multi-layer perceptron(ResMLP)is employed for SOH regression,and a temporal convolutional network with attention(TCNAttention)is used for RUL estimation.Lifetime experiments on two battery types with different chemistries and form factors,evaluated through three rounds of paired cross-validation,validate the approach.Results show that the proposed features significantly reduce dimensionality and computational cost while substantially lowering SOH error,achieving an average normalized root mean square error of 2.3%.The RUL prediction reaches an average error of 14.8%.Overall,the framework balances interpretability,robustness,and feasibility,providing a practical solution for battery management systems(BMS)monitoring and life prediction.
基金supported by the National Natural Science Foundation of China(52572086 and 52502371)the Natural Science Foundation of Henan(242300421010)+2 种基金Scientific and Technological Innovation Talents in Colleges and Universities in Henan Province(22HASTIT001)the Henan Province Natural Science Foundation Outstanding Youth Fund Project(242300421009)the Henan Province science and technology research project(252102320354and 252102230037)。
文摘The demand for high-temperature electromagnetic wave absorption(EWA)materials has significantly increased alongside advancements in aerospace and communication technologies.Although traditional magnetic absorbers,such as ferrites and metal powders,show excellent magnetic loss performance at room temperature,they have significant limitations in harsh environments due to their high density,low Curie temperature,and susceptibility to oxidation.In contrast,carbon-containing materials have emerged as promising candidates for high-temperature EWA applications,owing to their high melting point,low density,tunable dielectric loss mechanisms,and superior thermal stability.Unlike magnetic materials,carbon-based systems primarily dissipate electromagnetic energy through conductance loss,dipole polarization,and interfacial polarization,thereby avoiding performance degradation at elevated temperatures.However,several critical challenges remain,including insufficient oxidation resistance,mechanical reliability issues,and the need for stable impedance matching.To address these limitations,recent strategies such as defect engineering,heterointerface construction,and metamaterial design have been proposed to enhance thermal stability and functional performance.This review provides a systematic summary of recent advances in carbon-containing absorbers,with a focus on dielectric loss mechanisms,optimization strategies,and multiscale structural design principles.By elucidating the structure–property relationships of carbon materials,carbide ceramics,and novel carbon hybrids,this study aims to offer theoretical and technical guidance for the development of advanced high-temperature electromagnetic wave absorbers,thereby promoting their practical applications in aerospace and telecommunications.
基金supported by the National Key R&D Program of China[2023YFB4006100]。
文摘Despite significant progress in fuel cell technology,its large-scale industrial application is still challenged by the frequently encountered performance failure during long-term operation.Clarifying the failure mechanism is the key to extending the lifecycle and enhancing stability.Herein,we have developed a time and space resolved multi-field characterization,including electrochemical impedance spectroscopy,to unveil its underlying mechanism.With this operando and non-destructive characterization,the dynamic evolution of the internal mass transport,heat,and electricity field distribution is fully depicted within an industrial-scale fuel cell in operation.Thus,it is revealed that hydrogen starvation occurs in the outlet region due to the excessive hydrogen consumption during the loading-down process.This can induce local low current density and carbon corrosion,which may subsequently cause severe damage to the structure of the catalyst layer and membrane,ultimately leading to performance failure.With this understanding,we further identify a descriptor for early diagnosis to prevent any potential degradation.The methodology is of significance,which can bring fuel cell technology a step further towards industrial applications.
基金supported by the National Natural Science Foundation of China(Nos.22479092 and 22078190)。
文摘The pseudo-two-dimensional(P2D)model plays an important role in exploring physicochemical mechanisms,predicting the state of health,and improving the fast charge capability for Li-ion batteries(LIBs).However,the fast charge leads to the lithium concentration gradient in the solid and electrolyte phases and the non-uniform electrochemical reaction at the solid/electrolyte interface.In order to decouple charge transfer reactions in LIBs under dynamic conditions,understanding the spatio-temporal resolution of the P2D model is urgently required.Till now,the study of this aspect is still insufficient.This work studies the spatio-temporal resolution for dynamic/static electrochemical impedance spectroscopy(DEIS/SEIS)on multiple scales.In detail,DEIS and SEIS with spatio-temporal resolutions are used to decouple charge transfer reactions in LIBs based on the numerical solution of the P2D model in the frequency domain.The calculated results indicate that decoupling solid diffusion requires a high spatial resolution along the r-direction in particles,decoupling electrolyte diffusion and interfacial transfer reaction requires a high spatial resolution along the x-direction,and decoupling charge transfer reactions in LIBs at an extremely low state of charge(SOC)requires an extremely high temporal resolution along the t-direction.Finally,the optimal range of spatio-temporal resolutions for DEIS/SEIS is derived,and the method to decouple charge transfer reactions with spatio-temporal resolutions is developed.
基金supported in part by the National Natural Science Foundation of China under 52125704 and 51937001.
文摘Interaction between the converter and the grid may lead to harmonic oscillations.The impedance-based method is an effective way to deal with the stability issue.In this study,the impedance-based method is used to investigate the small-signal stability of a cascaded 12-pulse line-commutated converter-based high-voltage direct current(LCC-HVDC)transmission system.In the modeling part,the impedance models of the single rectifier and inverter are established respectively with consideration to the effect of frequency coupling,which has improved the accuracy of the models.Based on the models,the AC impedance models of the cascaded LCC-HVDC transmission system are established both on the rectifier and inverter side.In the stability analysis part,the stability of the system is analyzed under different working conditions.The simulation results reveal that the established impedance model can properly represent the stability of this system.The findings of this study can provide a theoretical reference for the stability design and oscillation suppression strategy of LCC-HVDC transmission systems and LCC interconnected systems.
基金PEEP titration in ARDS patients using EIT combined with lung ultrasound,Key Laboratory of Emergency Trauma Research,Ministry of Education (KLET-202201)airway clearance protocol in ICU mechanically ventilated patients based on electrical impedance imaging technology,Natural Science Foundation of Hunan Province (2024JJ9148)effects of end expiratory positive pressure on lung re-expansion in patients with ARDS and intra-abdominal hypertension monitored using lung ultrasound,Natural Science Foundation of Hunan Province (2023JJ60308)
文摘BACKGROUND:Individualized positive end-expiratory pressure(PEEP)titration is a crucial technique in mechanical ventilation therapy for acute respiratory distress syndrome(ARDS)patients with intra-abdominal hypertension(IAH).This study aimed to evaluate the eff ectiveness of electrical impedance tomography(EIT)-guided PEEP titration in this population.METHODS:This prospective study enrolled 36 ARDS patients,including 22 patients with IAH and 14 without IAH.All the patients underwent EIT-guided PEEP titration at the intersection point between alveolar overdistension and collapse during a decremental PEEP trial.The changes in pulmonary ventilation distribution,respiratory mechanics and hemodynamics during the titration process were observed.RESULTS:After EIT-guided PEEP titration was performed,the PEEP,peak inspiratory pressure and plateau pressure increased significantly(P<0.05).Furthermore,no significant differences were observed in respiratory system compliance,tidal volume,driving pressure,or the 4*DP+RR index between the two groups(P>0.05).The mechanical power increased in the non-IAH(NIAH)group after PEEP titration(P<0.05).Ventilation in gravity-dependent lung regions significantly increased(P<0.05),and the oxygenation index(PaO2/FiO2)improved signifi cantly(P<0.05)in both groups.However,blood pressure,heart rate,respiratory rate,central venous pressure,and lactate levels did not signifi cantly change.In the IAH group,the PaO2/FiO2 ratio improved less than that in the NIAH group did(P<0.05).CONCLUSION:In our study,individualized PEEP titration guided by EIT improved oxygenation in ARDS patients with concomitant IAH without signifi cantly aff ecting hemodynamics.The presence of IAH may limit the improvement of oxygenation during EIT-guided PEEP titration.
基金co-supported by the National Natural Science Foundation of China(No.52206039)the Taihang Laboratory of China(No.A2053)+1 种基金the Aeronautical Science Foundation of China(No.20240011051001)the National Key R&D Program of China(No.2021YFB3703900)。
文摘Developing advanced acoustic treatments,such as the Multi-Degree-of-Freedom(MDOF)septum liner,to realize the broadband noise reduction is critical for silent aeroengines.This study investigates experimentally the MDOF septum liner and its impedance model on the Beihang Grazing Flow Duct(BGFD)setup,over a wide frequency range under grazing flows up to 0.5 Mach number and Sound Pressure Level(SPL)up to 150 dB,typically encountered in aeroengine nacelles.Several specimens varying in the numbers,types,and depths of septa among units are designed,fabricated,and measured.Their impedances and Transmission Losses(TL)are obtained using the mirror-based multimodal straightforward method and the mode decomposition technique,respectively.Generally,the model predictions show good agreement with the educed impedances in all cases,and such liners with a large-porosity facesheet exhibit low acoustic nonlinearities in the presence of high SPL,especially under high-velocity grazing flows.Moreover,a MDOF liner we delicately designed,compared with a conventional broadband three-layer perforated liner as the reference,is close to the resonant state at more frequencies and thus has higher and wider measured TL spectra almost from 1 kHz up to 10 kHz at studied Mach numbers,under the premise of saving 22.7 mm in the thickness.These show that,the MDOF septum liner,if well designed,can achieve an ultra-broadband efficient sound attenuation using more limited spaces in complex aeroacoustic environments.
基金financial support from the National Natural Science Foundation of China(Nos.52305363 and 12104508)the Natural Science Research of Jiangsu Higher Education Institutions in China(No.23KJB460006)the Postgraduate Research and Practice Innovation Program of Jiangsu Province,China(No.SJCX24_2388)。
文摘Effects of thermo-mechanical Laser Shock Peening without Absorbing Coating(LSPwC)on the dual-phase structural evolution and the potential of LSPwC in the corrosion resistance of2Cr13 martensitic stainless steel were investigated.A Neodymium-doped Yttrium Aluminium Garnet(Nd:YAG)laser with a pulse energy of 7.6 J was used for the LSPwC treatment.Microstructural changes were characterized using X-Ray Diffraction(XRD),Transmission Electron Microscopy(TEM)and X-ray Photoelectron Spectroscopy(XPS).Corrosion behavior was evaluated via Electrochemical Impedance Spectroscopy(EIS)and Potentiodynamic Polarization(PDP)measurements,and the morphology of corrosion pits was observed using Scanning Electron Microscopy(SEM).Results show that the LSPwC treatment led to an obvious reduction in the corrosion resistance owing to the precipitation of numerous Cr_(8)O_(21),surface roughening and tensile residual stress generated by laser ablation.However,LSPwC with subsequent treatment of slight ablation layer removal brought about 13.5 fold increase in charge transfer resistance and about 83.6% reduction of passive current density,and the significant improvement in the corrosion resistance is attributed to the Cr2O3-rich surface passive film resulting from Cr_(15.58)Fe_(7.42)C_(6)decomposition caused by LSPwC-induced mechanical effects.
基金part of the ALU-STORE project(Aluminum Metal as Energy Carrier for Seasonal Energy Storage)funded by the KIT Future Fieldsthe research performed at CELEST(Center for Electrochemical Energy Storage Ulm-Karlsruhe)+1 种基金funding from the German Federal Ministry of Research,Technology and Space(BMFTR)in the Nano Mat Futur program(03XP0423)basic funding from the Helmholtz Association。
文摘α-MnO_(2) is a promising,inexpensive,and readily producible catalyst for the oxygen reduction reaction(ORR)in alkaline media,but its application is limited by low electronic conductivity.In this study,we enhance the performance ofα-MnO_(2) electrodes by systematically varying theα-MnO_(2)-to-Vulcan ratio within the catalyst layer.Electrodes are evaluated in a gas diffusion electrode(GDE)half-cell,where an optimized catalyst layer composition leads to significantly improved ORR performance.By finetuning both theα-MnO_(2)-to-Vulcan ratio and theα-MnO_(2) loading,the electrode outperforms a commercial MnO_(2)-based electrode and approaches the performance of the Pt/C benchmark.The improvement is attributed to the presence of a three-dimensional(3D)Vulcan network electronically connecting catalytically activeα-MnO_(2) sites with the substrate.Additionally,the optimized electrodes are employed in a prototype Al-O_(2) flow cell.Under constant oxygen flow,power densities exceed 250 mW cm^(-2),which is significantly higher than that of conventional Al-air batteries.Electrochemical impedance spectroscopy combined with distribution of relaxation times(DRT)analysis enables the separation of anode and cathode charge transfer impedances without the need for an additional reference electrode.The analysis reveals that the anode contributes more than twice as much impedance as the cathode,highlighting the need for further anode optimization.This work demonstrates a transferable approach for catalyst layer screening under technically relevant conditions in the GDE half-cell.Subsequent measurements in an Al-O_(2) flow cell validate the approach.The methodology is widely applicable to the development of advanced electrodes for a variety of metal-air battery technologies.
基金supported by National Natural Science Foundation of China(NSFC 52432002,52372041,52302087)Heilongjiang Touyan Team Program,the Fundamental Research Funds for the Central Universities(Grant No.HIT.OCEF.2021003)the Shanghai Aerospace Science and Technology Innovation Fund(SAST2022-60).
文摘Developing effective strategies to regulate graphene’s conduction loss and polarization has become a key to expanding its application in the electromagnetic wave absorption(EMWA)field.Based on the unique energy band structure of graphene,regulating its bandgap and electrical properties by introducing heteroatoms is considered a feasible solution.Herein,metal-nitrogen doping reduced graphene oxide(M–N-RGO)was prepared by embedding a series of single metal atoms M–N_(4) sites(M=Mn,Fe,Co,Ni,Cu,Zn,Nb,Cd,and Sn)in RGO using an N-coordination atom-assisted strategy.These composites had adjustable conductivity and polarization to optimize dielectric loss and impedance matching for efficient EMWA performance.The results showed that the minimum reflection loss(RL_(min))of Fe–N-RGO reaches−74.05 dB(2.0 mm)and the maximum effective absorption bandwidth(EAB_(max))is 7.05 GHz(1.89 mm)even with a low filler loading of only 1 wt%.Combined with X-ray absorption spectra(XAFS),atomic force microscopy,and density functional theory calculation analysis,the Fe–N_(4) can be used as the polarization center to increase dipole polarization,interface polarization and defect-induced polarization due to d-p orbital hybridization and structural distortion.Moreover,electron migration within the Fe further leads to conduction loss,thereby synergistically promoting energy attenuation.This study demonstrates the effectiveness of metal-nitrogen doping in regulating the graphene′s dielectric properties,which provides an important basis for further investigation of the loss mechanism.
