Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical...Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical properties and damage mechanisms of carbonaceous slate under cyclic impact loads of varying intensities,cyclic dynamic tests are conducted using a triaxial split Hopkinson pressure bar.This study analyzes the stress-strain relationship,energy damage evolution,and macro-to-micro failure characteristics.The results show that peak stress and strain are significantly influenced by impact intensity and the number of impacts.The initial dynamic stress is positively correlated with the impact intensity,but with more impact,the dynamic stress decreases while the peak strain increases.Energy evolution follows a pattern of"slow growthfluctuating growthrapid growth,"with the crack initiation stress and its proportion decreasing.CT and SEM analyses reveal that as the impact intensity increases,failure becomes more chaotic,the fracture volume increases,and the fracture mode shifts from interlayer and intergranular to through-layer and trans-granular fractures.These findings provide an experimental basis for soft rock tunnel stability analysis.展开更多
This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior...This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.展开更多
Dual-phase heterogeneous structures confer eutectic high-entropy alloy(EHEA)with excellent strength-ductility synergy under quasi-static tensile loading.However,it is questionable whether the EHEAs pos-sess equally go...Dual-phase heterogeneous structures confer eutectic high-entropy alloy(EHEA)with excellent strength-ductility synergy under quasi-static tensile loading.However,it is questionable whether the EHEAs pos-sess equally good impact toughness because the phase interfaces are vulnerable to crack initiation.This work aimed to study the Charpy impact toughness and fracture behavior of AlCoCrFeNi_(2.1) EHEA.The results indicate that while maintaining high tensile strength and ductility,the AlCoCrFeNi_(2.1) EHEA also shows a satisfactory impact toughness of 25.86 J/cm^(2),superior to most other dual-phase alloys like TC4 titanium alloy or DP steel.Fractography analysis reveals characteristic regions of the fracture surface,which suggests energy absorption mechanisms primarily through ductile dimples,flat cleavage facets,secondary cracks,and microvoids,corresponding to a ductile-brittle mixed fracture mode.Detailed obser-vations of the deformed microstructure through TEM and EBSD demonstrate that FCC(L1_(2))and BCC(B2)phases underwent concurrent tearing along their phase boundaries,indicating a crucial influence of phase boundaries over crack initiation and propagation.The FCC(L1_(2))phase bore almost all plastic deformation of the sample through dislocation slip,whereas the BCC(B2)phase underwent a rapid shearing but almost no dislocation slip.Crack initiation under impact loading typically starts at the FCC(L1_(2))/BCC(B2)inter-face before propagating through the BCC(B2)phase.Additionally,this work further examines the effect of sample size and notch shape on the impact toughness of AlCoCrFeNi_(2.1) EHEA.A comparative analysis of the mechanical behavior under static and impact loading was also conducted,highlighting differences and connections in stress distribution and fracture surface morphology.The study offers valuable insights into the mechanical response and fracture behavior of AlCoCrFeNi_(2.1) EHEA under impact loading,provid-ing crucial information for its potential industrial applications.展开更多
Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an...Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an artificial method in a laboratory setting using microbial-induced carbonate precipitation(MICP)to simulate the natural process of cementation of limestone.The artificially cemented sand has a high degree of similarity with the natural weakly limestone in three aspects:(1)the mineral composition of the cemented material is also granular calcite and acicular aragonite;(2)the microstructure in interconnected open pore network can be gradually closed and contracted with cementation.The porosity reaches to approximately 9.2%;(3)both the stress-strain relationship and the unconfined strength closely resemble that of natural weakly limestone.Furthermore,both static and dynamic behaviors of artificial limestone were studied by quasi-static compression tests and Split Hopkinson Pressure Bar(SHPB)tests,finding that the unconfined strength of weakly artifical limestone exponentially increases with increasing strain rate.A rate-dependent bond strength was proposed and implemented in software to reveal the mechanism of strain rate effects.It is found that the loading velocity is too high to keep in sync with the initiation and propagation of cracks under impact loading.This delay-induced viscosity may restrict the movement of the surrounding balls,thus increasing resistance.展开更多
The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control...The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control during debris flows is crucial but difficult.Herein,an eco-friendly control system featuring anchoring natural boulders(NBs)with(negative Poisson's ratio)NPR anchor cables is proposed to form an NB-NPR baffle.A series of flume experiments are conducted to verify the effect of NB-NPR baffles on controlling debris flow impact.The deployment of NB-NPR baffles substantially influences the kinematic behavior of a debris flow,primarily in the form of changes in the depositional properties and impact intensities.The results show that the NB-NPR baffle matrix successfully controls boulder mobility and exhibits positive feedback on solid particle deposition.The NB-NPR baffle group exhibits a reduction in peak impact force ranging from 29%to 79%compared to that of the control group in the basic experiment.The NPR anchor cables play a significant role in the NB-NPR baffle by demonstrating particular characteristics,including consistent resistance,large deformation,and substantial energy absorption.The NB-NPR baffle innovatively utilizes the natural boulders in a debris flow gully by converting destructive boulders into constructive boulders.Overall,this research serves as a basis for future field experiments and applications.展开更多
In this study,a coupled loading method combining three-dimensional static loading with graded cyclic impacts was developed to simulate the stress environment of the surrounding rock under impact ground pressure caused...In this study,a coupled loading method combining three-dimensional static loading with graded cyclic impacts was developed to simulate the stress environment of the surrounding rock under impact ground pressure caused by cyclic disturbances.The mechanical behavior and energy dissipation of coal under this loading method were studied using a split Hopkinson pressure bar(SHPB).The results showed that the pre-applied cyclic low-pressure impacts deteriorated the coal sample's resistance to external loads.Under both cyclic low-pressure impacts and single high-pressure impacts,the dynamic peak stress and secant modulus decreased with increasing impact cycles,exhibiting dynamic fatigue characteristics.The dynamic secant modulus of the sample decreased by 4.14%-6.67%after each impact.The dissipated energy for coal fragmentation samples increased with the number of impacts,averaging 28%under cyclic low-pressure impacts and 29%under single high-pressure impacts.The efficiency of dissipated energy for coal fragmentation initially increased and then decreased as the wave impedance ratio between the coal sample and the bar increased,reaching a maximum of 43.3%when the ratio was 0.06.Based on the defined damage variable,the damage to coal samples from high-pressure impacts was found to be 12 times greater than that under low-pressure conditions.The degree of coal fragmentation was positively correlated with the maximum damage increment.With increasing maximum damage increment,the failure mode of the coal sample evolved from tensile failure to tensile-compressive-shear composite failure.展开更多
Submarine landslides frequently occur on continental margins and slopes,thereby causing serious damage to offshore structures.Therefore,analyzing their motion behavior and predicting their impact forces are crucial.In...Submarine landslides frequently occur on continental margins and slopes,thereby causing serious damage to offshore structures.Therefore,analyzing their motion behavior and predicting their impact forces are crucial.In this work,the smooth particle hydrodynamics(SPH)algorithm is used in the development of a multiphase flow model for submarine landslides.The underwater landslide and the ambient water are simulated using the non-Newtonian and Newtonian fluid models,respectively.An artificial diffusion term of density is incorporated in the governing equation,and the equation of state is modified to improve the stability and accuracy of the SPH model.Three benchmark problems are simulated using the SPH model.The effect of SPH particle size on the simulated results is also explored.The effects of the rheological parameters on the landslide motion behavior are investigated by conducting a sensitivity analysis.Numerical results fit the experimental data well,indicating the good stability of the SPH model and its accuracy in simulating the motion and impact behavior of submarine landslides.展开更多
The understanding of the impact of high-velocity microparticles on human skin tissue is important for the ad-ministration of drugs during transdermal drug delivery.This paper aims to numerically investigate the dynami...The understanding of the impact of high-velocity microparticles on human skin tissue is important for the ad-ministration of drugs during transdermal drug delivery.This paper aims to numerically investigate the dynamic behavior of human skin tissue under micro-particle impact in transdermal drug delivery.The numerical model was developed based on a coupled smoothed particle hydrodynamics(SPH)and FEM method via commercial FE software RADIOSS.Analytical analysis was conducted applying the Poncelet model and was used as validation data.A hyperelastic one-term Ogden model with one pair of material parameters(μ,α)was implemented for the skin tissue.Sensitivity studies reveal that the effect of parameter α on the penetration process is much more significant than μ.Numerical results correlate well with the analytical curves with various particle diameters and impact velocities,its capability of predicting the penetration process of micro-particle impacts into skin tissues.This work can be further investigated to guide the design of transdermal drug delivery equipment.展开更多
A thermal-solid-liquid complex operational environment induces structural interface developing a typical coupling sliding/impact wear behavior.It results in contact damage until systems fail,which may cause significan...A thermal-solid-liquid complex operational environment induces structural interface developing a typical coupling sliding/impact wear behavior.It results in contact damage until systems fail,which may cause significant economic losses and catastrophic consequences.The key point of solving this problem is to reveal the coupling damage mechanism of the sliding/impact behavior in typical systems and life characterization under a complicate evolving environment.This has been a hot topic in the area of mechanical reliability.The main work in this paper can be concluded as follows.Firstly,the main industries in which the"sliding/impact behavior"takes place have been introduced.Then,existing studies on the wear mechanism and degree analysis are presented,which includes surface morphology analysis,wear debris analysis,and wear degree measurement.Meanwhile,existing problems in theoretical modeling and experiments in current research are summarized,so as to point out a bright direction for future research on wear prediction.They include interface contact modeling,mathematic coupling mechanism modeling,wear equation establishment,and wear life characterization,which can provide some new ideas for improving the existing studies on the sliding/impact wear behavior.展开更多
The counter-intuitive behaviors of pin-ended beams under the projectile impact axe investigated with ANSYS/LS-DYNA in this paper. It studies in detail their displacement-time history curves, final deformed shapes, ene...The counter-intuitive behaviors of pin-ended beams under the projectile impact axe investigated with ANSYS/LS-DYNA in this paper. It studies in detail their displacement-time history curves, final deformed shapes, energy relationships and projectile impact velocity ranges related to their counter-intuitive behaviors. The influences of the impact positions on their counterintuitive behaviors are also discussed. The results show that no matter where the impact position on the beam is, the counter-intuitive behaviors of pinned beams will occur as long as the impacting velocity lies within a proper range. Corresponding to the occurring of the counter-intuitive behaviors, the rebounding number in the displacement history curves of the beams decreases from a few times to zero with an increase of the impact velocity. The final deformation modes of the beam corresponding to the counter-intuitive behaviors will appear in symmetrical and unsymmetrical forms no matter where the impact position is; the impact velocity of the first-occurring of the counter-intuitive behaviors of the beam increases slowly with the deviation of the impact position away from the mid-span.展开更多
While animal models of controlled cortical impact often display short-term motor dysfunction after injury, histological examinations do not show severe cortical damage. Thus, this model requires further improvement. M...While animal models of controlled cortical impact often display short-term motor dysfunction after injury, histological examinations do not show severe cortical damage. Thus, this model requires further improvement. Mice were subjected to injury at three severities using a Pin-Point^(TM)-controlled cortical impact device to establish secondary brain injury mouse models. Twenty-four hours after injury, hematoxylin-eosin staining, Fluoro-Jade B histofluorescence, and immunohistochemistry were performed for brain slices. Compared to the uninjured side, we observed differences of histopathological findings, neuronal degeneration, and glial cell number in the CA2 and CA3 regions of the hippocampus on the injured side. The Morris water maze task and beam-walking test verified long-term(14–28 days) spatial learning/memory and motor balance. To conclude, the histopathological responses were positively correlated with the degree of damage,as were the long-term behavioral manifestations after controlled cortical impact. All animal procedures were approved by the Institutional Animal Care and Use Committee at Shanghai Jiao Tong University School of Medicine.展开更多
The dry impact wear behavior of bainite ductile cast iron was evaluated under three different impact loads for 30000 cycles. The strain-hardening effects beneath the contact surfaces were analyzed according to the sur...The dry impact wear behavior of bainite ductile cast iron was evaluated under three different impact loads for 30000 cycles. The strain-hardening effects beneath the contact surfaces were analyzed according to the surfaces＇ micro-hardness profiles. Scanning electron microscopy （SEM） and X-ray diffraction （XRD） were used to observe the wom surfaces. The results indicated that the material with the highest hardness was the one continuously cooled at 20℃, which exhibited the lowest wear rate under each set of test conditions. The hardness of the worn surface and the thickness of the hardened layer increased with the increases in impact load and in the number of test cycles. The better wear performance of the sample cooled at 20℃ is attributed to its finer microstructure and superior mechanical properties. All the samples underwent the transformation induced plasticity （TRIP） phenomenon after impact wear, as revealed by the fact that small amounts of retained austenite were detected by XRD.展开更多
Annular grooved projectiles(AGPs)have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates.They could become embedded solidly in the target surface dur...Annular grooved projectiles(AGPs)have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates.They could become embedded solidly in the target surface during low-velocity impact.In this investigation,the firm embedding behavior of AGP was observed by impact experiments.Corresponding numerical simulations provided a better understanding of this process.Experimental and numerical results indicated that the firm embedding behavior of AGP was mainly due to the filling-material in the groove rather than the friction between the projectile and target,unlike traditional shape such as conical projectile.According to observation,firm embedding process can generally be subdivided into four stages:initial-cratering stage,groove-filling stage,fillingmaterial failure stage and rebound vibration stage.Moreover,the damage mechanics of target material around crater was obtained through microscopic tests.A comparison of the cross-sectional figures between the experiment and simulation proved that the analysis and the proposed method were reasonable and feasible,which further demonstrated that the firm embedding behavior has application potential in new concept warheads.展开更多
The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the d...The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the damage mechanism.The influences of impact velocity and reactive projectile chemical characteristics on the damage effect are decoupled analyzed based on this model.These analyses indicate that the high energy releasing efficiency and fast reaction propagation velocity of the reactive projectile are conducive to enhancing the damage effect.The experiments with various reactive projectiles impact velocity increasing from 702 to 1385 m/s were conducted to verify this model.The experimental results presented that,the damage hole radius of the rear-plate increases with the increase of impact velocity.At the impact velocity of 1350 m/s,the radius of damage hole formed by PTFE/Al/Bi_(2)O_(3),PTFE/Al/MoO_(3),PTFE/Al/Fe_(2)O_(3)projectile on the rear-plate become smaller in sequence.These results are consistent with the analytical model prediction,demonstrating that this model can predict the damage effect quantitatively.This work is of constructive significance to the application of reactive projectiles.展开更多
To understand the mechanical and twinning behaviors of a fine-grained extruded Mg-8.0Al-0.1Mn-2.0Ca alloy under high-speed impact,impact tests were carried out using a split Hopkinson pressure bar,and microstructures ...To understand the mechanical and twinning behaviors of a fine-grained extruded Mg-8.0Al-0.1Mn-2.0Ca alloy under high-speed impact,impact tests were carried out using a split Hopkinson pressure bar,and microstructures at strains of 0.05,0.10 and 0.20 were obtained using a series of stop rings manufactured by high-strength steel.The stress response and twinning behavior are closely related to loading direction and applied strain rate.The true stress-true strain curves are s-shaped in extrusion direction(ED)and c-shaped in transverse direction(TD),showing apparent anisotropy,while the yield strength is insensitive to loading direction.Almost identical strain-rate sensitivity is demonstrated by the stress in ED and TD.Interestingly,de-twinning is apparent as the applied strain increases to 0.20,and it is enhanced with increasing the applied strain rate.In contrast,the twin density in ED samples is clearly higher than that in TD samples.By modifying the terms of strain hardening and strain rate hardening in the classical JC model,an optimized model is built,which can accurately predict the stress response behavior of the studied alloy under high-speed impact along ED and TD.The correlation coefficient(R)and average absolute relative error(AARE)are 98.63%and 0.0199 for ED,and 96.88%and 0.0202 for TD,respectively.展开更多
We have for the first time elucidated the microstructural evolution and deformation behaviors of a gradient textured AZ31 B Mg alloy plate under the ultrahigh strain rate of ~10~6 s^(-1) that is generated by a two-sta...We have for the first time elucidated the microstructural evolution and deformation behaviors of a gradient textured AZ31 B Mg alloy plate under the ultrahigh strain rate of ~10~6 s^(-1) that is generated by a two-stage light gas gun with the hypervelocities of 1.6-4.4 km s^(-1). The hypervelocity impact cratering behaviors indicate that the cratering deformation of AZ31 B Mg alloy is mainly affected by the inertia and strength of the target material. The crater prediction equation of AZ31 B Mg alloy target under impact velocity of 5 km s^(-1) is given. The 2017 Al projectile completely melts in the Mg alloy target plate at the impact velocities of 3.8 km s^(-1) and 4.4 km s^(-1), and the microstructural evolution around the crater is: dynamic recrystallization zone, high-density twinning zone, low-density twinning zone, and Mg alloy matrix. It is found that the dynamic recrystallization, twinning and cracking are the main deformation behaviors for the AZ31 B Mg alloy to absorb the shock wave energy and release the stress generated by the hypervelocity impact. The main plastic deformation mechanisms of the Mg alloy target during hypervelocity impact are twinning and dislocation slip. Microstructure analysis shows the interactions of twins-twins, dislocations-dislocations, and twins-dislocations determine the strain hardening during the hypervelocity impact process, which eventually contributes the dynamic mechanical properties. The evolution of microhardness around the crater further demonstrates the microstructural evolutions and their interactions under the hypervelocity impacts.展开更多
The deformation behavior and formability of gradient nano-grained（GNG） AISI 304 stainless steel in uniaxial and biaxial states were investigated by means of tensile test and small punch test（SPT）. The GNG top laye...The deformation behavior and formability of gradient nano-grained（GNG） AISI 304 stainless steel in uniaxial and biaxial states were investigated by means of tensile test and small punch test（SPT）. The GNG top layer was fabricated on coarse grains（CG） AISI 304 by ultrasonic impact treatment. The results showed that the CG substrate could effectively suppress the strain localization of NC in GNG layer, and an approximate linear relationship existed between the thickness of substrate（h） and uniform true strain before necking（ε_（unif））. Grain growth of NC was observed at the stress state with high Stress triaxiality T, which led to better ductility of GNG/CG 304 in SPT, as well as similar true strain after the onset of necking（ε_（neck）） compared with coarse 304 in tensile test. Ei-values of GNG/CG 304 with different structures were nearly the same at different punch speeds, and good formability of GNG/CG 304 was demonstrated. However, punch speed and microstructure needed to be optimized to avoid much lost of membrane strain region in biaxial stress state.展开更多
This study investigates how Internet media in the mobile phone influence on the cognitive and behavioral aspects of human sexuality. Sex is being deviating from socially accepted behaviors; ranging from bisexuality to...This study investigates how Internet media in the mobile phone influence on the cognitive and behavioral aspects of human sexuality. Sex is being deviating from socially accepted behaviors; ranging from bisexuality to homosexuality. Based on the qualitative methodology using particular case studies and textual analysis as well as survey research leading to quantitative methodology, this assumes of a transition of cultures as a result of the thorough impact of Internet towards society. In conclusion, lnternet implicit practices in the Mobile Phone in youth and teen societies storms a big change in sexuality, is also affecting towards the human cognitive and behavioral phases of the social life in traditional Buddhist rural village setting in Sri Lanka.展开更多
To improve the defense capability of military equipment under extreme conditions,impact-resistant and high-energy-consuming materials have to be developed.The damping characteristic of entangled porous metallic wire m...To improve the defense capability of military equipment under extreme conditions,impact-resistant and high-energy-consuming materials have to be developed.The damping characteristic of entangled porous metallic wire materials(EPMWM)for vibration isolation was previously investigated.In this paper,a study focusing on the impact-resistance of EPMWM with the consideration of ambient temperature is presented.The quasi-static and low-velocity impact mechanical behavior of EPMWM under different temperatures(25℃-300℃)are systematically studied.The results of the static compression test show that the damping energy dissipation of EPMWM increases with temperature while the nonlinear damping characteristics are gradually enhanced.During the impact experiments,the impact energy loss rate of EPMWM was between 65%and 85%,while the temperatures increased from 25℃to 300℃.Moreover,under the same drop impact conditions,the overall deformation of EPMWM decreases in the temperature range of 100℃-200℃.On the other hand,the impact stiffness,energy dissipation,and impact loss factor of EPMWM significantly increase with temperature.This can be attributed to an increase in temperature,which changes the thermal expansion coefficient and contact state of the internal wire helixes.Consequently,the energy dissipation mode(dry friction,air damping,and plastic deformation)of EPMWM is also altered.Therefore,the EPMWM may act as a potential candidate material for superior energy absorption applications.展开更多
The mechanical behavior of TiNi alloy and Cr12MoV alloy under dynamic impact loading was investigated with a self-made impact testing system. The real-time contact force was measured with a piezoelectric force sensor ...The mechanical behavior of TiNi alloy and Cr12MoV alloy under dynamic impact loading was investigated with a self-made impact testing system. The real-time contact force was measured with a piezoelectric force sensor and digital signal processing system during impact. Equations for predicting instantaneous velocity anti displacement were presented. The results showed that the TiNi alloy exhibited a plateau of maximum contact force with increasing impact height. At the plateau stage, TiNi alloy in the parent phase can absorb impact energy and keep the maximum contact force nearly identical due to its pseudoelasticity.展开更多
基金support from the Joint Funds of the National Natural Science Foundation of China(Grant No.U23A2060)the National Natural Science Foundation of China(Grant Nos.42177143 and 52474150).
文摘Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical properties and damage mechanisms of carbonaceous slate under cyclic impact loads of varying intensities,cyclic dynamic tests are conducted using a triaxial split Hopkinson pressure bar.This study analyzes the stress-strain relationship,energy damage evolution,and macro-to-micro failure characteristics.The results show that peak stress and strain are significantly influenced by impact intensity and the number of impacts.The initial dynamic stress is positively correlated with the impact intensity,but with more impact,the dynamic stress decreases while the peak strain increases.Energy evolution follows a pattern of"slow growthfluctuating growthrapid growth,"with the crack initiation stress and its proportion decreasing.CT and SEM analyses reveal that as the impact intensity increases,failure becomes more chaotic,the fracture volume increases,and the fracture mode shifts from interlayer and intergranular to through-layer and trans-granular fractures.These findings provide an experimental basis for soft rock tunnel stability analysis.
文摘This paper prepared a novel as-cast W-Zr-Ti metallic ESM using high-frequency vacuum induction melting technique.The above ESM performs a typical elastic-brittle material feature and strain rate strengthening behavior.The specimens exhibit violent chemical reaction during the fracture process under the impact loading,and the size distribution of their residual debris follows Rosin-Rammler model.The dynamic fracture toughness is obtained by the fitting of debris length scale,approximately 1.87 MPa·m~(1/2).Microstructure observation on residual debris indicates that the failure process is determined by primary crack propagation under quasi-static compression,while it is affected by multiple cracks propagation in both particle and matrix in the case of dynamic impact.Impact test demonstrates that the novel energetic fragment performs brilliant penetration and combustion effect behind the front target,leading to the effective ignition of fuel tank.For the brittleness of as-cast W-ZrTi ESM,further study conducted bond-based peridynamic(BB-PD)C++computational code to simulate its fracture behavior during penetration.The BB-PD method successfully captured the fracture process and debris cloud formation of the energetic fragment.This paper explores a novel as-cast metallic ESM,and provides an available numerical avenue to the simulation of brittle energetic fragment.
基金financially supported by the Natural Science Spe-cial(Special Post)Research Foundation of Guizhou University(No.2023-46)the Youth Science and Technology Talent Development Program of Guizhou(No.QKJ[2024]24)the National Natural Science Foundation of China(Nos.52274260,52074096,and 52164017).
文摘Dual-phase heterogeneous structures confer eutectic high-entropy alloy(EHEA)with excellent strength-ductility synergy under quasi-static tensile loading.However,it is questionable whether the EHEAs pos-sess equally good impact toughness because the phase interfaces are vulnerable to crack initiation.This work aimed to study the Charpy impact toughness and fracture behavior of AlCoCrFeNi_(2.1) EHEA.The results indicate that while maintaining high tensile strength and ductility,the AlCoCrFeNi_(2.1) EHEA also shows a satisfactory impact toughness of 25.86 J/cm^(2),superior to most other dual-phase alloys like TC4 titanium alloy or DP steel.Fractography analysis reveals characteristic regions of the fracture surface,which suggests energy absorption mechanisms primarily through ductile dimples,flat cleavage facets,secondary cracks,and microvoids,corresponding to a ductile-brittle mixed fracture mode.Detailed obser-vations of the deformed microstructure through TEM and EBSD demonstrate that FCC(L1_(2))and BCC(B2)phases underwent concurrent tearing along their phase boundaries,indicating a crucial influence of phase boundaries over crack initiation and propagation.The FCC(L1_(2))phase bore almost all plastic deformation of the sample through dislocation slip,whereas the BCC(B2)phase underwent a rapid shearing but almost no dislocation slip.Crack initiation under impact loading typically starts at the FCC(L1_(2))/BCC(B2)inter-face before propagating through the BCC(B2)phase.Additionally,this work further examines the effect of sample size and notch shape on the impact toughness of AlCoCrFeNi_(2.1) EHEA.A comparative analysis of the mechanical behavior under static and impact loading was also conducted,highlighting differences and connections in stress distribution and fracture surface morphology.The study offers valuable insights into the mechanical response and fracture behavior of AlCoCrFeNi_(2.1) EHEA under impact loading,provid-ing crucial information for its potential industrial applications.
基金The authors would like to acknowledge the support of the National Natural Science Foundation of China(No.52279097,No.51779264)Blue and Green Project of Jiangsu Province.
文摘Natural cemented calcareous sand and limestone are highly complex and not well understood in terms of the me-chanical behavior due to the difficulty of obtaining undisturbed samples from far sea.This paper proposes an artificial method in a laboratory setting using microbial-induced carbonate precipitation(MICP)to simulate the natural process of cementation of limestone.The artificially cemented sand has a high degree of similarity with the natural weakly limestone in three aspects:(1)the mineral composition of the cemented material is also granular calcite and acicular aragonite;(2)the microstructure in interconnected open pore network can be gradually closed and contracted with cementation.The porosity reaches to approximately 9.2%;(3)both the stress-strain relationship and the unconfined strength closely resemble that of natural weakly limestone.Furthermore,both static and dynamic behaviors of artificial limestone were studied by quasi-static compression tests and Split Hopkinson Pressure Bar(SHPB)tests,finding that the unconfined strength of weakly artifical limestone exponentially increases with increasing strain rate.A rate-dependent bond strength was proposed and implemented in software to reveal the mechanism of strain rate effects.It is found that the loading velocity is too high to keep in sync with the initiation and propagation of cracks under impact loading.This delay-induced viscosity may restrict the movement of the surrounding balls,thus increasing resistance.
基金financial support from the National Natural Science Foundation of China(Grant No.41941018).
文摘The impacts of natural boulders carried by debris flows pose serious risks to the safety and reliability of structures and buildings.Natural boulders can be highly random and unpredictable.Consequently,boulder control during debris flows is crucial but difficult.Herein,an eco-friendly control system featuring anchoring natural boulders(NBs)with(negative Poisson's ratio)NPR anchor cables is proposed to form an NB-NPR baffle.A series of flume experiments are conducted to verify the effect of NB-NPR baffles on controlling debris flow impact.The deployment of NB-NPR baffles substantially influences the kinematic behavior of a debris flow,primarily in the form of changes in the depositional properties and impact intensities.The results show that the NB-NPR baffle matrix successfully controls boulder mobility and exhibits positive feedback on solid particle deposition.The NB-NPR baffle group exhibits a reduction in peak impact force ranging from 29%to 79%compared to that of the control group in the basic experiment.The NPR anchor cables play a significant role in the NB-NPR baffle by demonstrating particular characteristics,including consistent resistance,large deformation,and substantial energy absorption.The NB-NPR baffle innovatively utilizes the natural boulders in a debris flow gully by converting destructive boulders into constructive boulders.Overall,this research serves as a basis for future field experiments and applications.
基金supported by the Youth Fund of the CCTEG Coal Mining Research Institute(Grant No.KCYJY-2023-QN-01)the National Natural Science Foundation of China(Grant No.52174080)the Science Foundation of Tiandi Technology Co.,Ltd.(Grant No.2022-2-TD-ZD016).
文摘In this study,a coupled loading method combining three-dimensional static loading with graded cyclic impacts was developed to simulate the stress environment of the surrounding rock under impact ground pressure caused by cyclic disturbances.The mechanical behavior and energy dissipation of coal under this loading method were studied using a split Hopkinson pressure bar(SHPB).The results showed that the pre-applied cyclic low-pressure impacts deteriorated the coal sample's resistance to external loads.Under both cyclic low-pressure impacts and single high-pressure impacts,the dynamic peak stress and secant modulus decreased with increasing impact cycles,exhibiting dynamic fatigue characteristics.The dynamic secant modulus of the sample decreased by 4.14%-6.67%after each impact.The dissipated energy for coal fragmentation samples increased with the number of impacts,averaging 28%under cyclic low-pressure impacts and 29%under single high-pressure impacts.The efficiency of dissipated energy for coal fragmentation initially increased and then decreased as the wave impedance ratio between the coal sample and the bar increased,reaching a maximum of 43.3%when the ratio was 0.06.Based on the defined damage variable,the damage to coal samples from high-pressure impacts was found to be 12 times greater than that under low-pressure conditions.The degree of coal fragmentation was positively correlated with the maximum damage increment.With increasing maximum damage increment,the failure mode of the coal sample evolved from tensile failure to tensile-compressive-shear composite failure.
基金supported by the National Natural Science Foundation of China(Nos.42472332,42102318 and 42006143)the Open Research Fund Program of Zhoushan Field Scientific Observation and Research Station for Marine Geo-Hazards,China Geological Survey(No.ZSORS22-07)+1 种基金the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning(No.TP2019037)the Open Research Fund Program of Marine Ecological Restoration and Smart Ocean Engineering Research Center of Hebei Province(No.HB MESO2312)。
文摘Submarine landslides frequently occur on continental margins and slopes,thereby causing serious damage to offshore structures.Therefore,analyzing their motion behavior and predicting their impact forces are crucial.In this work,the smooth particle hydrodynamics(SPH)algorithm is used in the development of a multiphase flow model for submarine landslides.The underwater landslide and the ambient water are simulated using the non-Newtonian and Newtonian fluid models,respectively.An artificial diffusion term of density is incorporated in the governing equation,and the equation of state is modified to improve the stability and accuracy of the SPH model.Three benchmark problems are simulated using the SPH model.The effect of SPH particle size on the simulated results is also explored.The effects of the rheological parameters on the landslide motion behavior are investigated by conducting a sensitivity analysis.Numerical results fit the experimental data well,indicating the good stability of the SPH model and its accuracy in simulating the motion and impact behavior of submarine landslides.
基金supported by the Nanjing Institute of Technology(Grant No.YKJ202301).
文摘The understanding of the impact of high-velocity microparticles on human skin tissue is important for the ad-ministration of drugs during transdermal drug delivery.This paper aims to numerically investigate the dynamic behavior of human skin tissue under micro-particle impact in transdermal drug delivery.The numerical model was developed based on a coupled smoothed particle hydrodynamics(SPH)and FEM method via commercial FE software RADIOSS.Analytical analysis was conducted applying the Poncelet model and was used as validation data.A hyperelastic one-term Ogden model with one pair of material parameters(μ,α)was implemented for the skin tissue.Sensitivity studies reveal that the effect of parameter α on the penetration process is much more significant than μ.Numerical results correlate well with the analytical curves with various particle diameters and impact velocities,its capability of predicting the penetration process of micro-particle impacts into skin tissues.This work can be further investigated to guide the design of transdermal drug delivery equipment.
基金supported by the National Natural Science Foundation of China(No.51675025).
文摘A thermal-solid-liquid complex operational environment induces structural interface developing a typical coupling sliding/impact wear behavior.It results in contact damage until systems fail,which may cause significant economic losses and catastrophic consequences.The key point of solving this problem is to reveal the coupling damage mechanism of the sliding/impact behavior in typical systems and life characterization under a complicate evolving environment.This has been a hot topic in the area of mechanical reliability.The main work in this paper can be concluded as follows.Firstly,the main industries in which the"sliding/impact behavior"takes place have been introduced.Then,existing studies on the wear mechanism and degree analysis are presented,which includes surface morphology analysis,wear debris analysis,and wear degree measurement.Meanwhile,existing problems in theoretical modeling and experiments in current research are summarized,so as to point out a bright direction for future research on wear prediction.They include interface contact modeling,mathematic coupling mechanism modeling,wear equation establishment,and wear life characterization,which can provide some new ideas for improving the existing studies on the sliding/impact wear behavior.
基金Project supported by Shanxi Province Returned Scholars Fund (No.200335).
文摘The counter-intuitive behaviors of pin-ended beams under the projectile impact axe investigated with ANSYS/LS-DYNA in this paper. It studies in detail their displacement-time history curves, final deformed shapes, energy relationships and projectile impact velocity ranges related to their counter-intuitive behaviors. The influences of the impact positions on their counterintuitive behaviors are also discussed. The results show that no matter where the impact position on the beam is, the counter-intuitive behaviors of pinned beams will occur as long as the impacting velocity lies within a proper range. Corresponding to the occurring of the counter-intuitive behaviors, the rebounding number in the displacement history curves of the beams decreases from a few times to zero with an increase of the impact velocity. The final deformation modes of the beam corresponding to the counter-intuitive behaviors will appear in symmetrical and unsymmetrical forms no matter where the impact position is; the impact velocity of the first-occurring of the counter-intuitive behaviors of the beam increases slowly with the deviation of the impact position away from the mid-span.
基金supported by the National Natural Science Foundation of China,No.81771332,81571184,81070990(all to CLZ)the Shanghai Key Medical Discipline for Critical Care Medicine of China,No.2017zz02017(to CLZ)+1 种基金the Key Discipline Construction Project of Pudong Health Bureau of Shanghai of China,No.PWZxk2017-23,PWYgf2018-05(both to CLZ)the Outstanding Leaders Training Program of Pudong Health Bureau of Shanghai of China,No.PWR12018-07(to CLZ)
文摘While animal models of controlled cortical impact often display short-term motor dysfunction after injury, histological examinations do not show severe cortical damage. Thus, this model requires further improvement. Mice were subjected to injury at three severities using a Pin-Point^(TM)-controlled cortical impact device to establish secondary brain injury mouse models. Twenty-four hours after injury, hematoxylin-eosin staining, Fluoro-Jade B histofluorescence, and immunohistochemistry were performed for brain slices. Compared to the uninjured side, we observed differences of histopathological findings, neuronal degeneration, and glial cell number in the CA2 and CA3 regions of the hippocampus on the injured side. The Morris water maze task and beam-walking test verified long-term(14–28 days) spatial learning/memory and motor balance. To conclude, the histopathological responses were positively correlated with the degree of damage,as were the long-term behavioral manifestations after controlled cortical impact. All animal procedures were approved by the Institutional Animal Care and Use Committee at Shanghai Jiao Tong University School of Medicine.
文摘The dry impact wear behavior of bainite ductile cast iron was evaluated under three different impact loads for 30000 cycles. The strain-hardening effects beneath the contact surfaces were analyzed according to the surfaces＇ micro-hardness profiles. Scanning electron microscopy （SEM） and X-ray diffraction （XRD） were used to observe the wom surfaces. The results indicated that the material with the highest hardness was the one continuously cooled at 20℃, which exhibited the lowest wear rate under each set of test conditions. The hardness of the worn surface and the thickness of the hardened layer increased with the increases in impact load and in the number of test cycles. The better wear performance of the sample cooled at 20℃ is attributed to its finer microstructure and superior mechanical properties. All the samples underwent the transformation induced plasticity （TRIP） phenomenon after impact wear, as revealed by the fact that small amounts of retained austenite were detected by XRD.
基金financially supported by the National Natural Science Foundation of China [grant number 11472053]
文摘Annular grooved projectiles(AGPs)have drawn ongoing concerns as an advanced penetrator for their excellent anti-rebound capability in impacting metal plates.They could become embedded solidly in the target surface during low-velocity impact.In this investigation,the firm embedding behavior of AGP was observed by impact experiments.Corresponding numerical simulations provided a better understanding of this process.Experimental and numerical results indicated that the firm embedding behavior of AGP was mainly due to the filling-material in the groove rather than the friction between the projectile and target,unlike traditional shape such as conical projectile.According to observation,firm embedding process can generally be subdivided into four stages:initial-cratering stage,groove-filling stage,fillingmaterial failure stage and rebound vibration stage.Moreover,the damage mechanics of target material around crater was obtained through microscopic tests.A comparison of the cross-sectional figures between the experiment and simulation proved that the analysis and the proposed method were reasonable and feasible,which further demonstrated that the firm embedding behavior has application potential in new concept warheads.
基金supported by the State Key Program of National Natural Science Foundation of China(Grant No.12132003)State Key Laboratory of Explosion Science and Technology(Grant No.QNKT20-07)。
文摘The time-sequenced damage behavior of the reactive projectile impacting double-layer plates is discussed.The analytical model considering the combined effect of kinetic and chemical energy is developed to reveal the damage mechanism.The influences of impact velocity and reactive projectile chemical characteristics on the damage effect are decoupled analyzed based on this model.These analyses indicate that the high energy releasing efficiency and fast reaction propagation velocity of the reactive projectile are conducive to enhancing the damage effect.The experiments with various reactive projectiles impact velocity increasing from 702 to 1385 m/s were conducted to verify this model.The experimental results presented that,the damage hole radius of the rear-plate increases with the increase of impact velocity.At the impact velocity of 1350 m/s,the radius of damage hole formed by PTFE/Al/Bi_(2)O_(3),PTFE/Al/MoO_(3),PTFE/Al/Fe_(2)O_(3)projectile on the rear-plate become smaller in sequence.These results are consistent with the analytical model prediction,demonstrating that this model can predict the damage effect quantitatively.This work is of constructive significance to the application of reactive projectiles.
基金supported by the National Natural Science Foundation of China(Nos.11872216 and 52071139)the Natural Science Foundation of Hunan Province(Nos.2019JJ50586 and 2019JJ50591)the Scientific Research Project of Hunan Provincial Department of Education(Nos.18B193 and 21B0471).
文摘To understand the mechanical and twinning behaviors of a fine-grained extruded Mg-8.0Al-0.1Mn-2.0Ca alloy under high-speed impact,impact tests were carried out using a split Hopkinson pressure bar,and microstructures at strains of 0.05,0.10 and 0.20 were obtained using a series of stop rings manufactured by high-strength steel.The stress response and twinning behavior are closely related to loading direction and applied strain rate.The true stress-true strain curves are s-shaped in extrusion direction(ED)and c-shaped in transverse direction(TD),showing apparent anisotropy,while the yield strength is insensitive to loading direction.Almost identical strain-rate sensitivity is demonstrated by the stress in ED and TD.Interestingly,de-twinning is apparent as the applied strain increases to 0.20,and it is enhanced with increasing the applied strain rate.In contrast,the twin density in ED samples is clearly higher than that in TD samples.By modifying the terms of strain hardening and strain rate hardening in the classical JC model,an optimized model is built,which can accurately predict the stress response behavior of the studied alloy under high-speed impact along ED and TD.The correlation coefficient(R)and average absolute relative error(AARE)are 98.63%and 0.0199 for ED,and 96.88%and 0.0202 for TD,respectively.
基金support from the Chongqing University Program (No.02090011044158)。
文摘We have for the first time elucidated the microstructural evolution and deformation behaviors of a gradient textured AZ31 B Mg alloy plate under the ultrahigh strain rate of ~10~6 s^(-1) that is generated by a two-stage light gas gun with the hypervelocities of 1.6-4.4 km s^(-1). The hypervelocity impact cratering behaviors indicate that the cratering deformation of AZ31 B Mg alloy is mainly affected by the inertia and strength of the target material. The crater prediction equation of AZ31 B Mg alloy target under impact velocity of 5 km s^(-1) is given. The 2017 Al projectile completely melts in the Mg alloy target plate at the impact velocities of 3.8 km s^(-1) and 4.4 km s^(-1), and the microstructural evolution around the crater is: dynamic recrystallization zone, high-density twinning zone, low-density twinning zone, and Mg alloy matrix. It is found that the dynamic recrystallization, twinning and cracking are the main deformation behaviors for the AZ31 B Mg alloy to absorb the shock wave energy and release the stress generated by the hypervelocity impact. The main plastic deformation mechanisms of the Mg alloy target during hypervelocity impact are twinning and dislocation slip. Microstructure analysis shows the interactions of twins-twins, dislocations-dislocations, and twins-dislocations determine the strain hardening during the hypervelocity impact process, which eventually contributes the dynamic mechanical properties. The evolution of microhardness around the crater further demonstrates the microstructural evolutions and their interactions under the hypervelocity impacts.
基金Funded by the National National Natural Science Foundation of China(No.51505189)Open Project of Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment&Technology(No.FM-2015-5)
文摘The deformation behavior and formability of gradient nano-grained（GNG） AISI 304 stainless steel in uniaxial and biaxial states were investigated by means of tensile test and small punch test（SPT）. The GNG top layer was fabricated on coarse grains（CG） AISI 304 by ultrasonic impact treatment. The results showed that the CG substrate could effectively suppress the strain localization of NC in GNG layer, and an approximate linear relationship existed between the thickness of substrate（h） and uniform true strain before necking（ε_（unif））. Grain growth of NC was observed at the stress state with high Stress triaxiality T, which led to better ductility of GNG/CG 304 in SPT, as well as similar true strain after the onset of necking（ε_（neck）） compared with coarse 304 in tensile test. Ei-values of GNG/CG 304 with different structures were nearly the same at different punch speeds, and good formability of GNG/CG 304 was demonstrated. However, punch speed and microstructure needed to be optimized to avoid much lost of membrane strain region in biaxial stress state.
文摘This study investigates how Internet media in the mobile phone influence on the cognitive and behavioral aspects of human sexuality. Sex is being deviating from socially accepted behaviors; ranging from bisexuality to homosexuality. Based on the qualitative methodology using particular case studies and textual analysis as well as survey research leading to quantitative methodology, this assumes of a transition of cultures as a result of the thorough impact of Internet towards society. In conclusion, lnternet implicit practices in the Mobile Phone in youth and teen societies storms a big change in sexuality, is also affecting towards the human cognitive and behavioral phases of the social life in traditional Buddhist rural village setting in Sri Lanka.
基金supported by the National Natural Science Foundation of China(grant number 51805086)the Natural Science Foundation of Fujian Province,China(grant number 2018J01763)。
文摘To improve the defense capability of military equipment under extreme conditions,impact-resistant and high-energy-consuming materials have to be developed.The damping characteristic of entangled porous metallic wire materials(EPMWM)for vibration isolation was previously investigated.In this paper,a study focusing on the impact-resistance of EPMWM with the consideration of ambient temperature is presented.The quasi-static and low-velocity impact mechanical behavior of EPMWM under different temperatures(25℃-300℃)are systematically studied.The results of the static compression test show that the damping energy dissipation of EPMWM increases with temperature while the nonlinear damping characteristics are gradually enhanced.During the impact experiments,the impact energy loss rate of EPMWM was between 65%and 85%,while the temperatures increased from 25℃to 300℃.Moreover,under the same drop impact conditions,the overall deformation of EPMWM decreases in the temperature range of 100℃-200℃.On the other hand,the impact stiffness,energy dissipation,and impact loss factor of EPMWM significantly increase with temperature.This can be attributed to an increase in temperature,which changes the thermal expansion coefficient and contact state of the internal wire helixes.Consequently,the energy dissipation mode(dry friction,air damping,and plastic deformation)of EPMWM is also altered.Therefore,the EPMWM may act as a potential candidate material for superior energy absorption applications.
文摘The mechanical behavior of TiNi alloy and Cr12MoV alloy under dynamic impact loading was investigated with a self-made impact testing system. The real-time contact force was measured with a piezoelectric force sensor and digital signal processing system during impact. Equations for predicting instantaneous velocity anti displacement were presented. The results showed that the TiNi alloy exhibited a plateau of maximum contact force with increasing impact height. At the plateau stage, TiNi alloy in the parent phase can absorb impact energy and keep the maximum contact force nearly identical due to its pseudoelasticity.
