This study investigates the influence of runaway current in runaway plasmas on the dynamics of sawtooth oscillations and resultant loss of runaway electrons(RE)using the 3D magnetohydrodynamic(MHD)code M3D-C^(1)(Jardi...This study investigates the influence of runaway current in runaway plasmas on the dynamics of sawtooth oscillations and resultant loss of runaway electrons(RE)using the 3D magnetohydrodynamic(MHD)code M3D-C^(1)(Jardin et al 2012 J.Comput.Sci.Discovery 6014002).Using an HL-2A-like equilibrium,we confirm that in the linear phase,the impact of REs on resistive internal kink instabilities is consistent with previous research.In the nonlinear phase,as the runaway current fully replaces the plasmas current,we observe a significant suppression of sawtooth oscillations,with the first sawtooth cycle occurring earlier compared to the case without runaway current.Following the first sawtooth collapse,plasma current density,runaway current density,and safety factor(q)flatten within the q=1 surface,albeit displaying fine structures.Subsequently,the growing high torodial(n)and poloidal(m)mode number modes disrupt the magnetic surfaces,leading to the loss of REs outside the q=1 surface,while minimally affecting the majority of REs well-confined within it.Thus,in the current model,the physical processes associated with the presence of sawtooth oscillations do not effectively dissipate runaway current,as REs are assumed to be collisionless.In addition,the final profile of runaway current density exhibits increased steepening near the q=1 surface in contrast to the initial profile,displaying a distinctive corrugated inhomogeneity influenced by the growing fluctuation of the n=0 component.Finally,detailed convergence tests are conducted to validate the numerical simulations.展开更多
Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into...Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.展开更多
An unauthorised version of the Chinese MMSE was used in this article by the authors without permission from the copyright owner,PAR.Necessary permission has now been retrospectively obtained from PAR.The MMSE is a cop...An unauthorised version of the Chinese MMSE was used in this article by the authors without permission from the copyright owner,PAR.Necessary permission has now been retrospectively obtained from PAR.The MMSE is a copyrighted instrument and may not be used or reproduced in whole or in part,in any form or language,or by any means without the written permission of PAR(www.parinc.com).展开更多
This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper cons...This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.展开更多
Marine current energy conversion with turbines is a growing field of interest owing to its high energy density and predictability.For wind energy,three-bladed horizontal-axis turbines are the most common because of th...Marine current energy conversion with turbines is a growing field of interest owing to its high energy density and predictability.For wind energy,three-bladed horizontal-axis turbines are the most common because of their high power capture.Forces on blades are considerably higher in marine currents,presenting challenges to turbine design.Current research focuses on blade optimization and the selection of reliable transmission systems,and data from experiments conducted in natural environments are lacking.This paper focuses on a five-bladed vertical axis marine current turbine with a direct drive generator especially designed for low rotational speed and presents data from real-world experiments and 3D simulation models.The paper specifically investigates the influence of blade pitch angle on power capture.Experiments have been conducted at 1.42 m/s with a turbine in a river for blade pitch angles of 0°and+3°(the angle is defined as the leading edge of the blade rotating outward,perpendicular to,and opposite of the turbine axis).Two numerical 3D models,namely a vortex model and an actuator line model,have been used to simulate the turbine under the same conditions(1.42 m/s and 0°,+3°).The experimental and simulation results show that a 0°pitch angle gives a higher power capture power than a+3°pitch angle.In addition,simulation models were used to simulate the performance for an extended range at pitch angles of−3°to+3°,a fixed tip-speed ratio,and a step size of 1°.The simulations show that+1°gives the highest power coefficient and increases the average power capture by up to 0.6%.The performance of vertical axis marine current turbines can be improved by increasing the pitch angle to 1°in the positive direction.By contrast,a negative pitch angle can increase the average power capture of wind turbines.展开更多
The newly identified Jinlin crater in southern China lies on a hillside covered by a thick granite weathering crust.It appears as a slightly elliptical bowl-shaped depression with a diameter of 820-900 m.The structure...The newly identified Jinlin crater in southern China lies on a hillside covered by a thick granite weathering crust.It appears as a slightly elliptical bowl-shaped depression with a diameter of 820-900 m.The structure is a tilted impact crater,showing a maximum rim height difference of about 200 m and an apparent depth of 90 m.The crater rim is composed mainly of granite weathered soil and a small amount of granite fragments,while the bottom of the crater is filled with the same mixture of granite weathered soil and granite fragments.Planar deformation features in quartz grains from the rock fragments of the crater provide decisive evidence for its impact origin.The impact event is inferred to have taken place during the Holocene.展开更多
The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during pen...The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during penetrating multi-layered plates,and generating a multipeak overpressure behind the plates.Here analytical models of RMFS self-distributed energy release and equivalent deflagration are developed.The multipeak overpressure formation model based on the single deflagration overpressure expression was promoted.The impact tests of RMFS on multi-layered plates at 584 m/s,616 m/s,and819 m/s were performed to validate the analytical model.Further,the influence of a single overpressure peak and time intervals versus impact velocity is discussed.The analysis results indicate that the deflagration happened within 20.68 mm behind the plate,the initial impact velocity and plate thickness are the crucial factors that dominate the self-distributed multipeak overpressure effect.Three formation patterns of multipeak overpressure are proposed.展开更多
Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evo...Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.展开更多
Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles a...Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles appeared at the bottom of the part during single-step forming,but no wrinkles were observed during double-step forming.The thinning rate and deviation of the wall thickness of the part in each area were less than 20%and 2.7 mm,correspondingly,and the drawing depth of the part reached 45.8 mm.The effect of double-step forming was better than that of single-step forming,which was related to the IHF forming law.Besides,the characteristics of the IHF process were studied by numerical simulation.The results indicated that when double-step forming was utilized,there was almost no velocity field in the opposite direction of deformation after the bottom of the part contacted the die,and the existence of stress state at the bottom would restrain and eliminate the wrinkles.The inertia effect evolved with the driving pressure.Specially,the inertia effect can improve the flow of metal and reduce the deviation of the wall thickness of the part under double-step forming.展开更多
In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honey...In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.展开更多
The synergistic effects of corrosion and impact loading on the microstructure evolution and dynamic mechanical properties of ultrahigh-strength AerMet 100 steel are investigated.Through integrated experiments and mode...The synergistic effects of corrosion and impact loading on the microstructure evolution and dynamic mechanical properties of ultrahigh-strength AerMet 100 steel are investigated.Through integrated experiments and modeling,the result reveals that the corrosion leads to grain refinement and a reduction in the proportion of low-angle grain boundaries.Notably,corrosion promotes austenite enrichment(increasing from 1.8%to 13.9%)through selective dissolution of the martensitic matrix,while repetitive impacts reverse this trend(reducing to 0.1%)through stress-induced martensitic transformation.Fracture analysis demonstrates corrosion-induced ductile-to-brittle transition,with quasi-cleavage features dominating after prolonged corrosion.A physics-based dynamic yield strength model with<3%prediction error relative to impact tests is developed.These findings establish microstructure-property relationships of AerMet 100 steel under multi-field coupling,providing critical guidance for designing corrosion-resistant ultrahigh-strength steels in marine-impact environments.展开更多
Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressur...Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressure as the shock wave propagates initially to the rear of the projectile.The shock wave that induces a phase-transition is commonly referred to as a macroscopic phase-transition wave,whereas the interface that separates the distinct phases is referred to as macroscopic phase-boundary.The contact interface between the spherical projectile and the thin plate,characterized by its curved surface,plays a significant role in the nonlinear propagation and evolution of wave systems.The pressure distribution along the central axis of a spherical projectile is derived in accordance with the linear decay law observed for axial pressure.On this basis,a quadratic function is employed to characterize the trend of changes in wave front pressure,thereby facilitating the establishment of a model for wave front pressure distribution.Using the phase-transition pressure criterion for materials,the wave front phase evolution process is derived,and the macroscopic phase-boundary is determined.Based on the geometric propagation model(GPM)and the pressure distribution of the wave front,a phase geometric propagation model(PGPM)is proposed.The phase distribution of a spherical projectile impacting a thin plate is obtained by theoretical methods.The accuracy of the PGPM is subsequently validated through a comparison of its results with those obtained from numerical simulations.展开更多
Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical...Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical properties and damage mechanisms of carbonaceous slate under cyclic impact loads of varying intensities,cyclic dynamic tests are conducted using a triaxial split Hopkinson pressure bar.This study analyzes the stress-strain relationship,energy damage evolution,and macro-to-micro failure characteristics.The results show that peak stress and strain are significantly influenced by impact intensity and the number of impacts.The initial dynamic stress is positively correlated with the impact intensity,but with more impact,the dynamic stress decreases while the peak strain increases.Energy evolution follows a pattern of"slow growthfluctuating growthrapid growth,"with the crack initiation stress and its proportion decreasing.CT and SEM analyses reveal that as the impact intensity increases,failure becomes more chaotic,the fracture volume increases,and the fracture mode shifts from interlayer and intergranular to through-layer and trans-granular fractures.These findings provide an experimental basis for soft rock tunnel stability analysis.展开更多
Compared with traditional energy sources,wind power has a lower environmental impact.However,emissions are still generated across the life cycle of wind turbines,from production to recycling.As wind power rapidly deve...Compared with traditional energy sources,wind power has a lower environmental impact.However,emissions are still generated across the life cycle of wind turbines,from production to recycling.As wind power rapidly develops and deployment increases,these impacts are becoming increasingly evident.A comprehensive understanding of these impacts is crucial for sustainable development.Based on the harmonization of previous detailed life cycle assessment(LCA)studies,this study develops a simplified LCA model that estimates the life cycle environmental impacts of wind turbines based on their nominal power.Using this simplified LCA model,we assess the global warming potential(GWP),acidification potential(AP),and cumulative energy demand(CED)of wind power at the regional scale for 2022 and under three future scenarios(high-power wind turbine promotion,reduced wind curtailment,and a comprehensive development scenario).The results indicate that in 2022,the life cycle GWP,AP,and CED of wind power in western China were 10.76 g CO_(2) eq/kWh,0.177 g SO_(2) eq/kWh,and 17.6 kJ/kWh,respectively.Scenario simulations suggest that reducing wind curtailment is the most effective approach for reducing emissions in Inner Mongolia,Gansu,Qinghai,Ningxia,and Xinjiang,producing average decreases of 8.64%in GWP,8.39%in AP,and 9.26%in CED.In contrast,for Guangxi,Chongqing,Sichuan,Guizhou,Yunnan,Xizang,and Shaanxi,the promotion of high-power wind turbines provides greater environmental benefits than reducing curtailment,producing average decreases of 3.45%,3.09%,and 4.29%in GWP,AP,and CED,respectively.These findings help clarify the environmental impact of wind power across its life cycle at the regional scale and provide theoretical references for the direction of future wind power development and the formulation of related policies.展开更多
Investigating effect of recrystallization mechanism on deformation mode and texture evolution is conducive to controlling deformation mechanism and texture in magnesium alloys under medium-high temperature impact load...Investigating effect of recrystallization mechanism on deformation mode and texture evolution is conducive to controlling deformation mechanism and texture in magnesium alloys under medium-high temperature impact loading.In the present study,a Johnson-Cook model incorporating twin strengthening was established to simulate macro-deformation,and a twinning induced recrystallization(TDRX)model and bulging recrystallization(GBBDRX)model are introduced into visco-plastic self consistant(VPSC)framework to quantitatively study the deformation mechanism of pre-twinned AZ31 magnesium alloy during medium-high temperature impact loading.Both TDRX and GBBDRX occur,with basal slip as the dominant slip system,followed by pyramidal〈c+a〉slip and prismatic slip.The dynamic recrystallization(DRX)significantly influences basal and pyramidal〈c+a〉slip systems,with minimal impact on secondary deformation mechanism.In addition,the recrystallization mechanism of grain boundary bowing increases the activity of basal slip and decreases the activity of pyramidal〈c+a〉slip.The nucleation and growth of recrystallized grains enhance basal slip activity and suppress pyramidal〈c+a〉slip,leading to the formation of a strong basal texture.As dynamic recrystallization progresses,a bimodal texture develops,characterized by a reduction in basal component pole density and a more pronounced basal slip.展开更多
This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable ...This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable bolts has received limited experimental attention,and their effectiveness in seismically active zones remains a subject of ongoing debate.To address this gap,a reverse pull-out test machine integrated with a drop hammer rig was employed.Tests were conducted on 70-t SUMO bulbed and non-bulbed cable bolts with encapsulation lengths of 300 and 450 mm,subjected to an impact energy of 14.52 k J.Results indicate that non-bulbed cables,despite showing lower initial peak loads(average 218 vs.328 k N for bulbed cables at 300 mm encapsulation),demonstrated superior energy absorption(average 11.26 vs.8.75 k J)and displacement capacity(average 48.40 vs.36.25 mm).Increasing the encapsulation length for bulbed cables led to a reduction in initial peak load but improved displacement and energy absorption.The dominant failure mechanism was debonding at the cable-grout interface,characterised by frictional sliding and cable rotation.These findings provide new insights into the energy dissipation mechanisms of cables and support the development of more resilient ground support systems for dynamically active conditions.展开更多
To elucidate the accelerated degradation mechanisms of metallic interconnects in operational solid oxide fuel cells,the oxidation behavior of FSS430 ferritic stainless steel under the coupling of simultaneous electric...To elucidate the accelerated degradation mechanisms of metallic interconnects in operational solid oxide fuel cells,the oxidation behavior of FSS430 ferritic stainless steel under the coupling of simultaneous electrical current and high-temperature exposure is investigated.Isothermal thermogravimetric analysis was employed to quantify oxidation kinetics,complemented by microstructural characterization using X-ray diffraction,scanning electron microscopy with energy-dispersive spectroscopy and transmission electron microscopy.Experimental results demonstrate that the applied current dramatically enhances oxidation rates,increasing specific mass gain from 0.25 mg/cm^(2)(0 A/cm^(2))to 5.20 mg/cm^(2)(0.2 A/cm^(2))and oxide scale thickness from 1.87 to 15.62μm after 200 h.This acceleration originates from current-induced electromigration forces that promote cationic transport through the oxide layer.The quantitative relationships between current density and oxidation parameters are established,enabling predictive modeling of interconnector degradation in solid oxide fuel cell(SOFC)systems.展开更多
The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated....The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.展开更多
基金supported in part by the National Key R&D Program of China (No.2022YFE03040002)the Natural Science Foundation of Sichuan (No.2022NSFSC1814)+3 种基金National Natural Science Foundation of China (Nos.12305246,12175053 and 12261131622)the Italian Ministry of Foreign Affairs (No.CN23GR02)the Fundamental Research Funds for the Central Universitiessupported by US Department of Energy (No.DE-AC0209CH11466)。
文摘This study investigates the influence of runaway current in runaway plasmas on the dynamics of sawtooth oscillations and resultant loss of runaway electrons(RE)using the 3D magnetohydrodynamic(MHD)code M3D-C^(1)(Jardin et al 2012 J.Comput.Sci.Discovery 6014002).Using an HL-2A-like equilibrium,we confirm that in the linear phase,the impact of REs on resistive internal kink instabilities is consistent with previous research.In the nonlinear phase,as the runaway current fully replaces the plasmas current,we observe a significant suppression of sawtooth oscillations,with the first sawtooth cycle occurring earlier compared to the case without runaway current.Following the first sawtooth collapse,plasma current density,runaway current density,and safety factor(q)flatten within the q=1 surface,albeit displaying fine structures.Subsequently,the growing high torodial(n)and poloidal(m)mode number modes disrupt the magnetic surfaces,leading to the loss of REs outside the q=1 surface,while minimally affecting the majority of REs well-confined within it.Thus,in the current model,the physical processes associated with the presence of sawtooth oscillations do not effectively dissipate runaway current,as REs are assumed to be collisionless.In addition,the final profile of runaway current density exhibits increased steepening near the q=1 surface in contrast to the initial profile,displaying a distinctive corrugated inhomogeneity influenced by the growing fluctuation of the n=0 component.Finally,detailed convergence tests are conducted to validate the numerical simulations.
基金National Key Research and Development Program of China(2021YFB3700801)。
文摘Low-density short-duration pulsed current-assisted aging treatment was applied to the Ti-6Al-4V-0.5Mo-0.5Zr alloy subjected to different solution treatments.The results show that numerous α_(p) phases redissolve into the new β phase during the pulsed current-assisted aging process,and then the newly formed β phase is mainly transformed into the β_(t) phase,with occasional transition to new α_(p) phase,leading to a remarkable grain refinement,especially for the lamellarαs phases.In comparison to conventional aging treatment,the pulsed current-assisted aging approach achieves a significant enhancement in strength without degrading ductility,yielding an excellent mechanical property combination:a yield strength of 932 MPa,a tensile strength of 1042 MPa,and an elongation of 12.2%.It is primarily ascribed to the increased fraction of β_(t) phases,the obvious grain refinement effect,and the slip block effect induced by the multiple-variantαs colonies distributed within β_(t) phases.
文摘An unauthorised version of the Chinese MMSE was used in this article by the authors without permission from the copyright owner,PAR.Necessary permission has now been retrospectively obtained from PAR.The MMSE is a copyrighted instrument and may not be used or reproduced in whole or in part,in any form or language,or by any means without the written permission of PAR(www.parinc.com).
基金Supported by the Fundamental Research Funds for the Central Universities(2024ZYGXZR047)the National Natural Science Foundation of China(62373156)the Guangdong Basic and Applied Basic Research Foundation(2024A1515011736)。
文摘This article investigates the robust current tracking control problem of three-phase grid-connected inverters with LCL filter under external disturbance by a dynamic state feedback control method.First,this paper constructs an internal model to learn the information of the states and input of the grid-connected inverter under steady state.Second,by utilizing the internal model principle,the paper turns the tracking control problem into the robust stabilization control problem based on some appropriate coordinate transformations.Then,The paper designs a dynamics state feedback control law to deal with this robust stabilization problem,and thus the solution of the robust current tracking control problem of three-phase grid-connected inverters can be obtained.This control method can ensure the asymptotic stability of the closedloop system.Finally,the paper illustrates the effectiveness of the proposed control approach through several groups of simulations,and compares it with the feedforward control method to verify the robustness of the proposed control method to uncertain parameters.
基金Supported by Jgust Richert,Standup for Energy and Vattenfall,the Swedish National Infrastructure for Computing(SNIC)at NSC at Linköping University partially funded by the Swedish Research Council under Grant Nos.2021/23-539 and 2021/5-443.
文摘Marine current energy conversion with turbines is a growing field of interest owing to its high energy density and predictability.For wind energy,three-bladed horizontal-axis turbines are the most common because of their high power capture.Forces on blades are considerably higher in marine currents,presenting challenges to turbine design.Current research focuses on blade optimization and the selection of reliable transmission systems,and data from experiments conducted in natural environments are lacking.This paper focuses on a five-bladed vertical axis marine current turbine with a direct drive generator especially designed for low rotational speed and presents data from real-world experiments and 3D simulation models.The paper specifically investigates the influence of blade pitch angle on power capture.Experiments have been conducted at 1.42 m/s with a turbine in a river for blade pitch angles of 0°and+3°(the angle is defined as the leading edge of the blade rotating outward,perpendicular to,and opposite of the turbine axis).Two numerical 3D models,namely a vortex model and an actuator line model,have been used to simulate the turbine under the same conditions(1.42 m/s and 0°,+3°).The experimental and simulation results show that a 0°pitch angle gives a higher power capture power than a+3°pitch angle.In addition,simulation models were used to simulate the performance for an extended range at pitch angles of−3°to+3°,a fixed tip-speed ratio,and a step size of 1°.The simulations show that+1°gives the highest power coefficient and increases the average power capture by up to 0.6%.The performance of vertical axis marine current turbines can be improved by increasing the pitch angle to 1°in the positive direction.By contrast,a negative pitch angle can increase the average power capture of wind turbines.
基金financial support from Shanghai Key Laboratory Novel Extreme Condition Materials,China(Grant No.22dz2260800)the Shanghai Science and Technology Committee,China(Grant No.22JC1410300).
文摘The newly identified Jinlin crater in southern China lies on a hillside covered by a thick granite weathering crust.It appears as a slightly elliptical bowl-shaped depression with a diameter of 820-900 m.The structure is a tilted impact crater,showing a maximum rim height difference of about 200 m and an apparent depth of 90 m.The crater rim is composed mainly of granite weathered soil and a small amount of granite fragments,while the bottom of the crater is filled with the same mixture of granite weathered soil and granite fragments.Planar deformation features in quartz grains from the rock fragments of the crater provide decisive evidence for its impact origin.The impact event is inferred to have taken place during the Holocene.
基金the support received from the National Natural Science Foundation of China(Grant No.12302460)the State Key Laboratory of Explosion Science and Safety Protection(Grant No.YBKT24-02)。
文摘The reactive materials filled structure(RMFS)is a structural penetrator that replaces high explosive(HE)with reactive materials,presenting a novel self-distributed initiation,multiple deflagrations behavior during penetrating multi-layered plates,and generating a multipeak overpressure behind the plates.Here analytical models of RMFS self-distributed energy release and equivalent deflagration are developed.The multipeak overpressure formation model based on the single deflagration overpressure expression was promoted.The impact tests of RMFS on multi-layered plates at 584 m/s,616 m/s,and819 m/s were performed to validate the analytical model.Further,the influence of a single overpressure peak and time intervals versus impact velocity is discussed.The analysis results indicate that the deflagration happened within 20.68 mm behind the plate,the initial impact velocity and plate thickness are the crucial factors that dominate the self-distributed multipeak overpressure effect.Three formation patterns of multipeak overpressure are proposed.
基金supported by the National Natural Science Foundation of China(Grant No.12272018)the National Key Basic Research Project(2022JCJQZD20600).
文摘Kinetic impact is the most practical planetary-defense technique,with momentum-transfer efficiency central to deflection design.We present a Monte Carlo photometric framework that couples ejecta sampling,dynamical evolution,and image synthesis to compare directly with HST,LICIACube,ground-based and Lucy observations of the DART impact.Decomposing ejecta into(1)a highvelocity(~1600 m/s)plume exhibiting Na/K resonance,(2)a low-velocity(~1 m/s)conical component shaped by binary gravity and solar radiation pressure,and(3)meter-scale boulders,we quantify each component’s mass and momentum.Fitting photometric decay curves and morphological evolution yields size-velocity distributions and,via scaling laws,estimates of Dimorphos’bulk density,cratering parameters,and cohesive strength that agree with dynamical constraints.Photometric ejecta modeling therefore provides a robust route to constrain momentum enhancement and target properties,improving predictive capability for kinetic-deflection missions.
基金financially supported by the National Key R&D Program of China(No.2024YFE0108800/T24KITG014)the National Natural Science Foundation of China(No:52475411)the International Partnership Program of Chinese Academy of Sciences(No.172GJHZ2022096FN)。
文摘Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles appeared at the bottom of the part during single-step forming,but no wrinkles were observed during double-step forming.The thinning rate and deviation of the wall thickness of the part in each area were less than 20%and 2.7 mm,correspondingly,and the drawing depth of the part reached 45.8 mm.The effect of double-step forming was better than that of single-step forming,which was related to the IHF forming law.Besides,the characteristics of the IHF process were studied by numerical simulation.The results indicated that when double-step forming was utilized,there was almost no velocity field in the opposite direction of deformation after the bottom of the part contacted the die,and the existence of stress state at the bottom would restrain and eliminate the wrinkles.The inertia effect evolved with the driving pressure.Specially,the inertia effect can improve the flow of metal and reduce the deviation of the wall thickness of the part under double-step forming.
基金the financial supports from National Key R&D Program for Young Scientists of China(Grant No.2022YFC3080900)National Natural Science Foundation of China(Grant No.52374181)+1 种基金BIT Research and Innovation Promoting Project(Grant No.2024YCXZ017)supported by Science and Technology Innovation Program of Beijing institute of technology under Grant No.2022CX01025。
文摘In this study,an inverse design framework was established to find lightweight honeycomb structures(HCSs)with high impact resistance.The hybrid HCS,composed of re-entrant(RE)and elliptical annular re-entrant(EARE)honeycomb cells,was created by constructing arrangement matrices to achieve structural lightweight.The machine learning(ML)framework consisted of a neural network(NN)forward regression model for predicting impact resistance and a multi-objective optimization algorithm for generating high-performance designs.The surrogate of the local design space was initially realized by establishing the NN in the small sample dataset,and the active learning strategy was used to continuously extended the local optimal design until the model converged in the global space.The results indicated that the active learning strategy significantly improved the inference capability of the NN model in unknown design domains.By guiding the iteration direction of the optimization algorithm,lightweight designs with high impact resistance were identified.The energy absorption capacity of the optimal design reached 94.98%of the EARE honeycomb,while the initial peak stress and mass decreased by 28.85%and 19.91%,respectively.Furthermore,Shapley Additive Explanations(SHAP)for global explanation of the NN indicated a strong correlation between the arrangement mode of HCS and its impact resistance.By reducing the stiffness of the cells at the top boundary of the structure,the initial impact damage sustained by the structure can be significantly improved.Overall,this study proposed a general lightweight design method for array structures under impact loads,which is beneficial for the widespread application of honeycomb-based protective structures.
基金supported by the National Natural Science Foundation of China(12522203,12532003 and U2267252)National Technological Basic Research Program of China,the Development and Application Project of Ship CAE Softwarethe Science and Technology Innovation 2035 Major Project of Yongjiang under Grant(2025Z009).
文摘The synergistic effects of corrosion and impact loading on the microstructure evolution and dynamic mechanical properties of ultrahigh-strength AerMet 100 steel are investigated.Through integrated experiments and modeling,the result reveals that the corrosion leads to grain refinement and a reduction in the proportion of low-angle grain boundaries.Notably,corrosion promotes austenite enrichment(increasing from 1.8%to 13.9%)through selective dissolution of the martensitic matrix,while repetitive impacts reverse this trend(reducing to 0.1%)through stress-induced martensitic transformation.Fracture analysis demonstrates corrosion-induced ductile-to-brittle transition,with quasi-cleavage features dominating after prolonged corrosion.A physics-based dynamic yield strength model with<3%prediction error relative to impact tests is developed.These findings establish microstructure-property relationships of AerMet 100 steel under multi-field coupling,providing critical guidance for designing corrosion-resistant ultrahigh-strength steels in marine-impact environments.
基金supported by National Natural Science Foundation of China(Nos.12432018,12372346)the Innovative Research Groups of the National Natural Science Foundation of China(No.12221002)National Natural Science Foundation of China(No.12302493)。
文摘Material phase-transition represents a significant phenomenon and mechanism in the context of hypervelocity protection.This study presents a thorough analysis of the phase-transition phenomena induced by shock pressure as the shock wave propagates initially to the rear of the projectile.The shock wave that induces a phase-transition is commonly referred to as a macroscopic phase-transition wave,whereas the interface that separates the distinct phases is referred to as macroscopic phase-boundary.The contact interface between the spherical projectile and the thin plate,characterized by its curved surface,plays a significant role in the nonlinear propagation and evolution of wave systems.The pressure distribution along the central axis of a spherical projectile is derived in accordance with the linear decay law observed for axial pressure.On this basis,a quadratic function is employed to characterize the trend of changes in wave front pressure,thereby facilitating the establishment of a model for wave front pressure distribution.Using the phase-transition pressure criterion for materials,the wave front phase evolution process is derived,and the macroscopic phase-boundary is determined.Based on the geometric propagation model(GPM)and the pressure distribution of the wave front,a phase geometric propagation model(PGPM)is proposed.The phase distribution of a spherical projectile impacting a thin plate is obtained by theoretical methods.The accuracy of the PGPM is subsequently validated through a comparison of its results with those obtained from numerical simulations.
基金support from the Joint Funds of the National Natural Science Foundation of China(Grant No.U23A2060)the National Natural Science Foundation of China(Grant Nos.42177143 and 52474150).
文摘Drilling and blasting tunneling is a cyclic process in which tunnel rock undergoes repeated blast loading,affecting its dynamic characteristics,energy evolution,and damage progression.To explore the dynamic mechanical properties and damage mechanisms of carbonaceous slate under cyclic impact loads of varying intensities,cyclic dynamic tests are conducted using a triaxial split Hopkinson pressure bar.This study analyzes the stress-strain relationship,energy damage evolution,and macro-to-micro failure characteristics.The results show that peak stress and strain are significantly influenced by impact intensity and the number of impacts.The initial dynamic stress is positively correlated with the impact intensity,but with more impact,the dynamic stress decreases while the peak strain increases.Energy evolution follows a pattern of"slow growthfluctuating growthrapid growth,"with the crack initiation stress and its proportion decreasing.CT and SEM analyses reveal that as the impact intensity increases,failure becomes more chaotic,the fracture volume increases,and the fracture mode shifts from interlayer and intergranular to through-layer and trans-granular fractures.These findings provide an experimental basis for soft rock tunnel stability analysis.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFF1303405).
文摘Compared with traditional energy sources,wind power has a lower environmental impact.However,emissions are still generated across the life cycle of wind turbines,from production to recycling.As wind power rapidly develops and deployment increases,these impacts are becoming increasingly evident.A comprehensive understanding of these impacts is crucial for sustainable development.Based on the harmonization of previous detailed life cycle assessment(LCA)studies,this study develops a simplified LCA model that estimates the life cycle environmental impacts of wind turbines based on their nominal power.Using this simplified LCA model,we assess the global warming potential(GWP),acidification potential(AP),and cumulative energy demand(CED)of wind power at the regional scale for 2022 and under three future scenarios(high-power wind turbine promotion,reduced wind curtailment,and a comprehensive development scenario).The results indicate that in 2022,the life cycle GWP,AP,and CED of wind power in western China were 10.76 g CO_(2) eq/kWh,0.177 g SO_(2) eq/kWh,and 17.6 kJ/kWh,respectively.Scenario simulations suggest that reducing wind curtailment is the most effective approach for reducing emissions in Inner Mongolia,Gansu,Qinghai,Ningxia,and Xinjiang,producing average decreases of 8.64%in GWP,8.39%in AP,and 9.26%in CED.In contrast,for Guangxi,Chongqing,Sichuan,Guizhou,Yunnan,Xizang,and Shaanxi,the promotion of high-power wind turbines provides greater environmental benefits than reducing curtailment,producing average decreases of 3.45%,3.09%,and 4.29%in GWP,AP,and CED,respectively.These findings help clarify the environmental impact of wind power across its life cycle at the regional scale and provide theoretical references for the direction of future wind power development and the formulation of related policies.
基金supported by the National Natural Science Foundation of China(52471132,52475356,12272192,52475344,U21A20130)the Natural Science Foundation of Fujian Province for Distinguished Young Scholars(2024J010031)as well as the Natural Science Foundation of Chongqing(grant number CSTB2023NSCQ-MSX0886).
文摘Investigating effect of recrystallization mechanism on deformation mode and texture evolution is conducive to controlling deformation mechanism and texture in magnesium alloys under medium-high temperature impact loading.In the present study,a Johnson-Cook model incorporating twin strengthening was established to simulate macro-deformation,and a twinning induced recrystallization(TDRX)model and bulging recrystallization(GBBDRX)model are introduced into visco-plastic self consistant(VPSC)framework to quantitatively study the deformation mechanism of pre-twinned AZ31 magnesium alloy during medium-high temperature impact loading.Both TDRX and GBBDRX occur,with basal slip as the dominant slip system,followed by pyramidal〈c+a〉slip and prismatic slip.The dynamic recrystallization(DRX)significantly influences basal and pyramidal〈c+a〉slip systems,with minimal impact on secondary deformation mechanism.In addition,the recrystallization mechanism of grain boundary bowing increases the activity of basal slip and decreases the activity of pyramidal〈c+a〉slip.The nucleation and growth of recrystallized grains enhance basal slip activity and suppress pyramidal〈c+a〉slip,leading to the formation of a strong basal texture.As dynamic recrystallization progresses,a bimodal texture develops,characterized by a reduction in basal component pole density and a more pronounced basal slip.
文摘This study investigates the performance of high-strength cable bolts under impact loading conditions representative of rock bursts in underground environments.Although widely used,the dynamic behaviour of these cable bolts has received limited experimental attention,and their effectiveness in seismically active zones remains a subject of ongoing debate.To address this gap,a reverse pull-out test machine integrated with a drop hammer rig was employed.Tests were conducted on 70-t SUMO bulbed and non-bulbed cable bolts with encapsulation lengths of 300 and 450 mm,subjected to an impact energy of 14.52 k J.Results indicate that non-bulbed cables,despite showing lower initial peak loads(average 218 vs.328 k N for bulbed cables at 300 mm encapsulation),demonstrated superior energy absorption(average 11.26 vs.8.75 k J)and displacement capacity(average 48.40 vs.36.25 mm).Increasing the encapsulation length for bulbed cables led to a reduction in initial peak load but improved displacement and energy absorption.The dominant failure mechanism was debonding at the cable-grout interface,characterised by frictional sliding and cable rotation.These findings provide new insights into the energy dissipation mechanisms of cables and support the development of more resilient ground support systems for dynamically active conditions.
基金supported by Natural Science Foundation of Wuhan(2024040701010051)Natural Science Foundation of Hubei(2023AFB111)and National Natural Science Foundation of China(52401108).
文摘To elucidate the accelerated degradation mechanisms of metallic interconnects in operational solid oxide fuel cells,the oxidation behavior of FSS430 ferritic stainless steel under the coupling of simultaneous electrical current and high-temperature exposure is investigated.Isothermal thermogravimetric analysis was employed to quantify oxidation kinetics,complemented by microstructural characterization using X-ray diffraction,scanning electron microscopy with energy-dispersive spectroscopy and transmission electron microscopy.Experimental results demonstrate that the applied current dramatically enhances oxidation rates,increasing specific mass gain from 0.25 mg/cm^(2)(0 A/cm^(2))to 5.20 mg/cm^(2)(0.2 A/cm^(2))and oxide scale thickness from 1.87 to 15.62μm after 200 h.This acceleration originates from current-induced electromigration forces that promote cationic transport through the oxide layer.The quantitative relationships between current density and oxidation parameters are established,enabling predictive modeling of interconnector degradation in solid oxide fuel cell(SOFC)systems.
基金supported by the National Natural Science Foundation of China(No.52090041).
文摘The influence of different solution and aging conditions on the microstructure,impact toughness,and crack initiation and propagation mechanisms of the novel α+β titanium alloy Ti6422 was systematically investigated.By adjusting the furnace cooling time after solution treatment and the aging temperature,Ti6422 alloy samples were developed with a multi-level lamellar microstructure,in-cluding microscaleαcolonies and α_(p) lamellae,as well as nanoscale α_(s) phases.Extending the furnace cooling time after solution treatment at 920℃ for 1 h from 240 to 540 min,followed by aging at 600℃ for 6 h,increased the α_(p) lamella content,reduced the α_(s) phase content,expanded theαcolonies and α_(p) lamellae size,and improved the impact toughness from 22.7 to 53.8 J/cm^(2).Additionally,under the same solution treatment,raising the aging temperature from 500 to 700℃ resulted in a decrease in the α_(s) phase content and a growth in the thickness of the α_(p) lamella and α_(s) phase.The impact toughness increased significantly with these changes.Samples with high α_(p) lamellae content or large α_(s) phase size exhibited high crack initiation and propagation energies.Impact deformation caused severe kinking of the α_(p) lamellae in crack initiation and propagation areas,leading to a uniform and high-density kernel average misorientation(KAM)distribu-tion,enhancing plastic deformation coordination and uniformity.Moreover,the multidirectional arrangement of coarserαcolonies and α_(p) lamellae continuously deflect the crack propagation direction,inhibiting crack propagation.
