It is an important subject to probe the structure in the medium by various kinds of detection methods in the geotechnical engineering. Based on the propagation theory of elastic wave in half-space layered medium, the ...It is an important subject to probe the structure in the medium by various kinds of detection methods in the geotechnical engineering. Based on the propagation theory of elastic wave in half-space layered medium, the propagation characteristics of elastic wave in layered medium with different elastic parameters are discussed using dynamic analysis of finite element method. It is known that the S-wave velocity, density and thickness of layer are related to the properties of the elastic wave including waveform characteristics, spectral characteristics and time-frequency characteristics. We pay special attention to the structure with low velocity interlayer. The impact imaging method is applied to the grouting construction of the immersed tube tunnel. Data acquisition and analytical method are introduced in detail. The grouting effects can be qualitatively evaluated by comparing the characteristics of elastic wave before grouting with those after grouting. Finally, a quantitative evaluation is obtained according to the relationship between energy response of elastic wave and impedance ratio.展开更多
Airborne gravity gradient data contain additional short-wavelength information about the buried geological bodies.This study develops a fast interpretation method based on the gravity gradient data for the sources’sp...Airborne gravity gradient data contain additional short-wavelength information about the buried geological bodies.This study develops a fast interpretation method based on the gravity gradient data for the sources’spatial location and physical property parameters.This study analyzes the advantages of the source parameter inversion method based on tensor invariants.It proposes a normalized fast-imaging method based on tensor invariants to quickly estimate the spatial location parameters of sources through the local maximum value position of the imaging results.First,the tensor invariant characteristics and the imaging method’s effect in a simple model are analyzed using a theoretical model.Second,to analyze the imaging method’s application effect in complex model conditions,the method’s applicability is quantitatively analyzed using the data added with noise,superimposed anomalies of adjacent sources,and anomalies of deep and shallow geological bodies.The theoretical model’s simulation results show that the model’s imaging results in this study have satisfactory performance on the spatial position estimation of the sources.Finally,the method is applied to the gravity anomaly data corresponding to the Humble salt dome.The imaging results can effectively estimate the distribution of the salt dome’s horizontal and depths,verifying the practicability of the method.展开更多
Imaging methods are frequently used to diagnose gastrointestinal diseases and play a crucial role in verifying clinical diagnoses among all diagnostic algorithms.However,these methods have limitations,challenges,benef...Imaging methods are frequently used to diagnose gastrointestinal diseases and play a crucial role in verifying clinical diagnoses among all diagnostic algorithms.However,these methods have limitations,challenges,benefits,and advantages.Addressing these limitations requires the application of objective criteria to assess the effectiveness of each diagnostic method.The diagnostic process is dynamic and requires a consistent algorithm,progressing from clinical subjective data,such as patient history(anamnesis),and objective findings to diagnostics ex juvantibus.Caution must be exercised when interpreting diagnostic results,and there is an urgent need for better diagnostic tests.In the absence of such tests,preliminary criteria and a diagnosis ex juvantibus must be relied upon.Diagnostic imaging methods are critical stages in the diagnostic workflow,with sensitivity,specificity,and accuracy serving as the primary criteria for evaluating clinical,laboratory,and instrumental symptoms.A comprehensive evaluation of all available diagnostic data guarantees an accurate diagnosis.The“gold standard”for diagnosis is typically established through either the results of a pathological autopsy or a lifetime diagnosis resulting from a thorough examination using all diagnostic methods.展开更多
The visual noise of each light intensity area is different when the image is drawn by Monte Carlo method.However,the existing denoising algorithms have limited denoising performance under complex lighting conditions a...The visual noise of each light intensity area is different when the image is drawn by Monte Carlo method.However,the existing denoising algorithms have limited denoising performance under complex lighting conditions and are easy to lose detailed information.So we propose a rendered image denoising method with filtering guided by lighting information.First,we design an image segmentation algorithm based on lighting information to segment the image into different illumination areas.Then,we establish the parameter prediction model guided by lighting information for filtering(PGLF)to predict the filtering parameters of different illumination areas.For different illumination areas,we use these filtering parameters to construct area filters,and the filters are guided by the lighting information to perform sub-area filtering.Finally,the filtering results are fused with auxiliary features to output denoised images for improving the overall denoising effect of the image.Under the physically based rendering tool(PBRT)scene and Tungsten dataset,the experimental results show that compared with other guided filtering denoising methods,our method improves the peak signal-to-noise ratio(PSNR)metrics by 4.2164 dB on average and the structural similarity index(SSIM)metrics by 7.8%on average.This shows that our method can better reduce the noise in complex lighting scenesand improvethe imagequality.展开更多
We propose a hierarchical multi-scale attention mechanism-based model in response to the low accuracy and inefficient manual classification of existing oceanic biological image classification methods. Firstly, the hie...We propose a hierarchical multi-scale attention mechanism-based model in response to the low accuracy and inefficient manual classification of existing oceanic biological image classification methods. Firstly, the hierarchical efficient multi-scale attention(H-EMA) module is designed for lightweight feature extraction, achieving outstanding performance at a relatively low cost. Secondly, an improved EfficientNetV2 block is used to integrate information from different scales better and enhance inter-layer message passing. Furthermore, introducing the convolutional block attention module(CBAM) enhances the model's perception of critical features, optimizing its generalization ability. Lastly, Focal Loss is introduced to adjust the weights of complex samples to address the issue of imbalanced categories in the dataset, further improving the model's performance. The model achieved 96.11% accuracy on the intertidal marine organism dataset of Nanji Islands and 84.78% accuracy on the CIFAR-100 dataset, demonstrating its strong generalization ability to meet the demands of oceanic biological image classification.展开更多
Imaging techniques play a crucial role in the modern era of medicine,particularly in gastroenterology.Nowadays,various non-invasive and invasive imaging modalities are being routinely employed to evaluate different ga...Imaging techniques play a crucial role in the modern era of medicine,particularly in gastroenterology.Nowadays,various non-invasive and invasive imaging modalities are being routinely employed to evaluate different gastrointestinal(GI)diseases.However,many instrumental as well as clinical issues are arising in the area of modern GI imaging.This minireview article aims to briefly overview the clinical issues and challenges encountered in imaging GI diseases while highlighting our experience in the field.We also summarize the advances in clinically available diagnostic methods for evaluating different diseases of the GI tract and demonstrate our experience in the area.In conclusion,almost all imaging techniques used in imaging GI diseases can also raise many challenges that necessitate careful consideration and profound expertise in this field.展开更多
Tunnel seismic advance prediction can effectively reduce the construction risk during tunnel excavation.Compared with the 2-D method,the 3-D method is more conducive to describing the spatial characteristics of the ge...Tunnel seismic advance prediction can effectively reduce the construction risk during tunnel excavation.Compared with the 2-D method,the 3-D method is more conducive to describing the spatial characteristics of the geological body by adding the seismic data in the vertical direction.However,some drawbacks still need improvement in the current 3-D tunnel seismic prediction method.(1)The geometry is complex,which is destructiveness,high cost,and time-consuming,and will delay the tunnel construction schedule.(2)Illumination of the anomalous body is insufficient,and the precision of migration imaging is low.(3)Shot points are far away from the tunnel face,the energy loss at the shot points is more serious.(4)The received signals at the tunnel wall have the surface wave with strong energy when the shot points are placed on the tunnel wall.(5)The geometry is not linear,so the directional filtering method cannot be used to extract the reflection wave.To overcome the drawbacks of the current prediction method,a new 3-D symmetrical tunnel seismic prediction method is proposed.Six geophones are installed on the tunnel wall,two on the left side,two on the right side,and two on the top side.Twenty-four shot points are placed on the tunnel face and near both sides of the tunnel wall,twelve shot points on the left side and twelve shot points on the right side.The shot points will move along with the forward excavation of the tunnel.The wavefield analysis,illumination statistics,and 3-D reverse time migration imaging are used to evaluate the proposed method.The result of modeled data indicates that the proposed 3-D geometry has some advantages:(1)the geometry is simple and the geophone installation time is short;(2)it has high illumination energy,wide illumination range,and can improve the prediction distance and imaging accuracy;(3)the proposed 3-D method can better estimate the velocity of surrounding rock and is more conducive to extracting the reflection wave with high resolution.展开更多
A recent review by Gulinac et al,provides an in-depth analysis of current clinical issues and challenges in gastrointestinal imaging.This editorial highlights the advancements in imaging techniques,including the integ...A recent review by Gulinac et al,provides an in-depth analysis of current clinical issues and challenges in gastrointestinal imaging.This editorial highlights the advancements in imaging techniques,including the integration of artificial intelligence and functional imaging modalities,and discusses the ongoing relevance of traditional nuclear medicine tests.The future of gastrointestinal imaging looks promising,with continuous improvements in resolution,enhanced ability to analyze color and texture beyond visual diagnosis,faster image processing,and the application of molecular imaging and nanoparticles expected to enhance diagnostic accuracy and clinical outcomes.展开更多
An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal...An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal- to-noise ratio data from all experimental data and then to use these selected data for elliptical imaging. Tile relationships among imaging accuracy, distance coefficient and residual direct wave are investigated, and then the residual direct wave is introduced to make the engineering application more convenient. The effectiveness of the proposed method is evaluated experimentally by sparse transducer array of a rectangle, and the results reveal that selecting experimental data of smaller distance coefficient can effectively improve imaging accuracy. Moreover, the direct wave difference increases with the decrease of the distance coefficient, which implies that the imaging accuracy can be effectively improved by using the experimental data of the larger direct wave difference.展开更多
Aiming at the problem that the lattice feature exceeds the view field of the scanning electron microscope(SEM)measuring system,a new lattice measuring method is proposed based on integral imaging technology.When the s...Aiming at the problem that the lattice feature exceeds the view field of the scanning electron microscope(SEM)measuring system,a new lattice measuring method is proposed based on integral imaging technology.When the system works,the SEM measuring system is equivalent to an integral image acquisition system.Firstly,a lattice measuring method is researched based on integral imaging theory.Secondly,the system parameters are calibrated by the VLSI lattice standard.Finally,the value of the lattice standard to be tested is determined based on the calibration parameters and the lattice measuring algorithm.The experimental results show that,compared with the traditional electron microscope measurement method,the relative error of the measured value of the algorithm is maintained within 0.2%,with the same level of measurement accuracy,but it expands the field of view of the electron microscope measurement system,which is suitable for the measurement of samples under high magnification.展开更多
In order to improve depth extraction accuracy, a method using moving array lenslet technique(MALT) in pickup stage is proposed, which can decrease the depth interval caused by pixelation. In this method, the lenslet a...In order to improve depth extraction accuracy, a method using moving array lenslet technique(MALT) in pickup stage is proposed, which can decrease the depth interval caused by pixelation. In this method, the lenslet array is moved along the horizontal and vertical directions simultaneously for N times in a pitch to get N sets of elemental images. Computational integral imaging reconstruction method for MALT is taken to obtain the slice images of the 3 D scene, and the sum modulus(SMD) blur metric is taken on these slice images to achieve the depth information of the 3 D scene. Simulation and optical experiments are carried out to verify the feasibility of this method.展开更多
We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular...We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular local targets. We also propose a calculation and analysis scheme based on numerical simulations of the subsurface transient electromagnetic fields. In the modeling of the electromagnetic fields, the forward modeling simulations are performed by using the finite-difference time-domain method and the discrete image method, which combines the Gaver–Stehfest inverse Laplace transform with the Prony method to solve the initial electromagnetic fields. The precision in the iterative computations is ensured by using the transmission boundary conditions. For the response analysis, we customize geoelectric models consisting of near-borehole targets and conductive wall rocks and implement forward modeling simulations. The observed electric fields are converted into induced electromotive force responses using multicomponent observation devices. By comparing the transient electric fields and multicomponent responses under different conditions, we suggest that the multicomponent-induced electromotive force responses are related to the horizontal and vertical gradient variations of the transient electric field at different times. The characteristics of the response are determined by the varying the subsurface transient electromagnetic fields, i.e., diffusion, attenuation and distortion, under different conditions as well as the electromagnetic fields at the observation positions. The calculation and analysis scheme of the response consider the surrounding rocks and the anomalous field of the local targets. It therefore can account for the geological data better than conventional transient field response analysis of local targets.展开更多
We conducted a study on the numerical calculation and response analysis of a transient electromagnetic field generated by a ground source in geological media. One solution method, the traditional discrete image method...We conducted a study on the numerical calculation and response analysis of a transient electromagnetic field generated by a ground source in geological media. One solution method, the traditional discrete image method, involves complex operation, and its digital filtering algorithm requires a large number of calculations. To solve these problems, we proposed an improved discrete image method, where the following are realized： the real number of the electromagnetic field solution based on the Gaver-Stehfest algorithm for approximate inversion, the exponential approximation of the objective kernel function using the Prony method, the transient electromagnetic field according to discrete image theory, and closed-form solution of the approximate coefficients. To verify the method, we tentatively calculated the transient electromagnetic field in a homogeneous model and compared it with the results obtained from the Hankel transform digital filtering method. The results show that the method has considerable accuracy and good applicability. We then used this method to calculate the transient electromagnetic field generated by a ground magnetic dipole source in a typical geoelectric model and analyzed the horizontal component response of the induced magnetic field obtained from the ＂ground excitation-stratum measurement method. We reached the conclusion that the horizontal component response of a transient field is related to the geoelectric structure, observation time, spatial location, and others. The horizontal component response of the induced magnetic field reflects the eddy current field distribution and its vertical gradient variation. During the detection of abnormal objects, positions with a zero or comparatively large offset were selected for the drill- hole measurements or a comparatively long observation delay was adopted to reduce the influence of the ambient field on the survey results. The discrete image method and forward calculation results in this paper can be used as references for relevant research.展开更多
Creating conditions to implement equilibrium processes of damage accumulation under a predictable scenario enables control over the failure of structural elements in critical states.It improves safety and reduces the ...Creating conditions to implement equilibrium processes of damage accumulation under a predictable scenario enables control over the failure of structural elements in critical states.It improves safety and reduces the probability of catastrophic behavior in case of accidents.Equilibrium damage accumulation in some cases leads to a falling part(called a postcritical stage)on the material’s stress-strain curve.It must be taken into account to assess the strength and deformation limits of composite structures.Digital image correlation method,acoustic emission(AE)signals recording,and optical microscopy were used in this paper to study the deformation and failure processes of an orthogonal-layup composite during tension in various directions to orthotropy axes.An elastic-plastic deformation model was proposed for the composite in a plane stress condition.The evolution of strain fields and neck formation were analyzed.The staging of the postcritical deformation process was described.AE signals obtained during tests were studied;characteristic damage types of a material were defined.The rationality and necessity of polymer composites’postcritical deformation stage taken into account in refined strength analysis of structures were concluded.展开更多
Cracking affected by wetting-drying cycles is a major cause of shallow failure of soft rock slopes.Knowledge of rock tensile properties and cracking behaviors helps better assess the stability of soft rock slopes.This...Cracking affected by wetting-drying cycles is a major cause of shallow failure of soft rock slopes.Knowledge of rock tensile properties and cracking behaviors helps better assess the stability of soft rock slopes.This study aims to examine the cracking behaviors and tensile strength of silty mudstone under wetting-drying cycles.The wetting-drying cycle and Brazilian splitting tests were performed on silty mudstone considering various cycle number and amplitude.The cracking behaviors of wetting-drying cycles were analyzed by digital image correlation,three-dimensional(3D)scanning technology,and scanning electron microscopy.The results reveal a spiral-like pattern of crack ratio escalation in silty mudstone,with a higher crack ratio observed during drying than wetting.Tensile strength and fracture energy correlate negatively with cycle number or amplitude,with cycle number exerting a more pronounced effect.The variance of the maximum principal strain reflects stages of initial deformation,linear deformation,strain localization,and stable deformation.The formation of strain localization zones reveals the physical process of crack propagation.Crack tip opening displacement progresses through stages of slow growth,exponential growth,and linear growth,delineating the process from crack initiation to stable extension.Failure modes of silty mudstone primarily involve tensile and tensile-shear failure,influenced by the geometric parameters of cracks induced by wetting-drying cycles.Fracture surface roughness and fractal dimension increase with cycle number due to mineral dissolution,physical erosion,and nondirectional crack propagation.Hydration-swelling and dehydration-shrinkage of clay minerals,along with absorption-drying cracking,initiate and merge cracks,leading to degradation of the rock mechanical properties.The findings could provide insights for mitigating shallow cracking of soft rock slopes under wetting-drying cycles.展开更多
Soft rock is one of the common geological conditions in coal mine underground water reservoir engineering.The cross-scale correlation analysis of water erosion soft lithology deterioration is very important for the sa...Soft rock is one of the common geological conditions in coal mine underground water reservoir engineering.The cross-scale correlation analysis of water erosion soft lithology deterioration is very important for the safety and stability of coal mine underground reservoir(CMUR)engineering.To address the issues of grain crowding and segmentation difficulties in cross-scale corelation analysis,as well as the limitations of traditional etching methods,this study proposes an image grain segmentation method based on deep learning algorithms,utilizing scanning electron microscopy and image process-ing techniques.The method successfully segments crowded grains and eliminates the interference from misplaced particles.In addition,indoor uniaxial compression tests were conducted to obtain the mechanical properties of sandstone samples with different water content.By quantitatively characterizing the macroscopic and microscopic deterioration degree of red sandstone samples with different water contents,the relationship between the strength changes of rock samples and the pet-rographic parameters such as grain size and grain shape is analyzed,and the influence law of soft lithology deterioration in CMUR engineering is revealed.The results indicate:(1)Water significantly weakens the mechanical properties and stability of soft rock.With increasing water content,the strength of sandstone samples continuously decreases,and the failure mode transitions from brittle to ductile failure.(2)The deterioration of micro-micro structures is the main cause of the decrease in mechanical properties of water-eroded soft rock.Grain size,grain area,and aspect ratio are negatively correlated with water content,indicating that hydrophilic minerals in soft rock dissolve under the action of water,leading to rock damage.(3)Grain size,area,and aspect ratio can serve as significant indicators for quantifying the strength changes of water-eroded soft rock.The research findings can be applied to stability assessment and disaster prevention in CMUR engineering.展开更多
A method using multiple mirror images of point charges is put forward to analyze the polarization of two identical conductor spheres in a uniform electrostatic field.By use of the method,the electric field distributio...A method using multiple mirror images of point charges is put forward to analyze the polarization of two identical conductor spheres in a uniform electrostatic field.By use of the method,the electric field distribution and the interaction force between two spheres can be calculated accurately even for very small gap between two spheres.Our results show that the magnitude of the product of the gap between two spheres and the local electric field in the center of the gap is approximately in the same order and the interaction between two spheres increases very fast as the two spheres are close to each other.We also show that the interaction force between two conductor spheres is almost same with that between two dielectric spheres with high permittivity.展开更多
The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation dur...The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation during the tests.In this study,splitting tests were performed on sea ice,with 32 samples subjected to the regular procedure and 8 samples subjected to the digital image correlation method.The salinity,density,and temperature were measured to determine the total porosity.With the advantage of the digital image correlation method,the full-field deformation of the ice samples could be determined.In the loading direction,the samples mainly deformed at the ice-platen contact area.In the direction vertical to the loading,deformation appears along the central line where the splitting crack occurs.Based on the distribution of the sample deformation,a modified solution was derived to calculate the tensile strength with the maximum load.Based on the modified solution,the tensile strength was further calculated together with the splitting test results.The results show that the tensile strength has a negative correlation with the total porosity,which agrees with previous studies based on uniaxial tension tests.展开更多
Wavefront sensing from multiple focal plane images is a promising technique for high-contrast imaging systems.However,the wavefront error of an optics system can be properly reconstructed only when it is very small.Th...Wavefront sensing from multiple focal plane images is a promising technique for high-contrast imaging systems.However,the wavefront error of an optics system can be properly reconstructed only when it is very small.This paper presents an iterative optimization algorithm for the direct measurement of large static wavefront errors from only one focal plane image.We first measure the intensity of the pupil image to get the pupil function of the system and acquire the aberrated image on the focal plane with a phase error that will be measured.Then we induce a dynamic phase on the tested pupil function and calculate the associated intensity of the reconstructed image on the focal plane.The algorithm will then try to minimize the intensity difference between the reconstructed image and the aberrated test image in the focal plane,where the induced phase is a variable of the optimization algorithm.The simulation shows that the wavefront of an optical system can theoretically be reconstructed with high precision,which indicates that such an iterative algorithm may be an effective way to perform wavefront sensing for high-contrast imaging systems.展开更多
基金the National Basic Research Program (973) of China(No.2011CB013505)
文摘It is an important subject to probe the structure in the medium by various kinds of detection methods in the geotechnical engineering. Based on the propagation theory of elastic wave in half-space layered medium, the propagation characteristics of elastic wave in layered medium with different elastic parameters are discussed using dynamic analysis of finite element method. It is known that the S-wave velocity, density and thickness of layer are related to the properties of the elastic wave including waveform characteristics, spectral characteristics and time-frequency characteristics. We pay special attention to the structure with low velocity interlayer. The impact imaging method is applied to the grouting construction of the immersed tube tunnel. Data acquisition and analytical method are introduced in detail. The grouting effects can be qualitatively evaluated by comparing the characteristics of elastic wave before grouting with those after grouting. Finally, a quantitative evaluation is obtained according to the relationship between energy response of elastic wave and impedance ratio.
基金supported by the National Key R&D Program of China(No.2020YFE0201300)Natural Science Foundation of Jilin Province(No.20210508033RQ)Fundamental Research Funds for the Central Universities and Geological Survey Project(No.DD20190129).
文摘Airborne gravity gradient data contain additional short-wavelength information about the buried geological bodies.This study develops a fast interpretation method based on the gravity gradient data for the sources’spatial location and physical property parameters.This study analyzes the advantages of the source parameter inversion method based on tensor invariants.It proposes a normalized fast-imaging method based on tensor invariants to quickly estimate the spatial location parameters of sources through the local maximum value position of the imaging results.First,the tensor invariant characteristics and the imaging method’s effect in a simple model are analyzed using a theoretical model.Second,to analyze the imaging method’s application effect in complex model conditions,the method’s applicability is quantitatively analyzed using the data added with noise,superimposed anomalies of adjacent sources,and anomalies of deep and shallow geological bodies.The theoretical model’s simulation results show that the model’s imaging results in this study have satisfactory performance on the spatial position estimation of the sources.Finally,the method is applied to the gravity anomaly data corresponding to the Humble salt dome.The imaging results can effectively estimate the distribution of the salt dome’s horizontal and depths,verifying the practicability of the method.
文摘Imaging methods are frequently used to diagnose gastrointestinal diseases and play a crucial role in verifying clinical diagnoses among all diagnostic algorithms.However,these methods have limitations,challenges,benefits,and advantages.Addressing these limitations requires the application of objective criteria to assess the effectiveness of each diagnostic method.The diagnostic process is dynamic and requires a consistent algorithm,progressing from clinical subjective data,such as patient history(anamnesis),and objective findings to diagnostics ex juvantibus.Caution must be exercised when interpreting diagnostic results,and there is an urgent need for better diagnostic tests.In the absence of such tests,preliminary criteria and a diagnosis ex juvantibus must be relied upon.Diagnostic imaging methods are critical stages in the diagnostic workflow,with sensitivity,specificity,and accuracy serving as the primary criteria for evaluating clinical,laboratory,and instrumental symptoms.A comprehensive evaluation of all available diagnostic data guarantees an accurate diagnosis.The“gold standard”for diagnosis is typically established through either the results of a pathological autopsy or a lifetime diagnosis resulting from a thorough examination using all diagnostic methods.
基金supported by the National Natural Science(No.U19A2063)the Jilin Provincial Development Program of Science and Technology (No.20230201080GX)the Jilin Province Education Department Scientific Research Project (No.JJKH20230851KJ)。
文摘The visual noise of each light intensity area is different when the image is drawn by Monte Carlo method.However,the existing denoising algorithms have limited denoising performance under complex lighting conditions and are easy to lose detailed information.So we propose a rendered image denoising method with filtering guided by lighting information.First,we design an image segmentation algorithm based on lighting information to segment the image into different illumination areas.Then,we establish the parameter prediction model guided by lighting information for filtering(PGLF)to predict the filtering parameters of different illumination areas.For different illumination areas,we use these filtering parameters to construct area filters,and the filters are guided by the lighting information to perform sub-area filtering.Finally,the filtering results are fused with auxiliary features to output denoised images for improving the overall denoising effect of the image.Under the physically based rendering tool(PBRT)scene and Tungsten dataset,the experimental results show that compared with other guided filtering denoising methods,our method improves the peak signal-to-noise ratio(PSNR)metrics by 4.2164 dB on average and the structural similarity index(SSIM)metrics by 7.8%on average.This shows that our method can better reduce the noise in complex lighting scenesand improvethe imagequality.
基金supported by the National Natural Science Foundation of China (Nos.61806107 and 61702135)。
文摘We propose a hierarchical multi-scale attention mechanism-based model in response to the low accuracy and inefficient manual classification of existing oceanic biological image classification methods. Firstly, the hierarchical efficient multi-scale attention(H-EMA) module is designed for lightweight feature extraction, achieving outstanding performance at a relatively low cost. Secondly, an improved EfficientNetV2 block is used to integrate information from different scales better and enhance inter-layer message passing. Furthermore, introducing the convolutional block attention module(CBAM) enhances the model's perception of critical features, optimizing its generalization ability. Lastly, Focal Loss is introduced to adjust the weights of complex samples to address the issue of imbalanced categories in the dataset, further improving the model's performance. The model achieved 96.11% accuracy on the intertidal marine organism dataset of Nanji Islands and 84.78% accuracy on the CIFAR-100 dataset, demonstrating its strong generalization ability to meet the demands of oceanic biological image classification.
基金Supported by The European Union-NextGenerationEU,through the National Recovery and Resilience Plan of the Republic of Bulgaria,No.BG-RRP-2.004-0008。
文摘Imaging techniques play a crucial role in the modern era of medicine,particularly in gastroenterology.Nowadays,various non-invasive and invasive imaging modalities are being routinely employed to evaluate different gastrointestinal(GI)diseases.However,many instrumental as well as clinical issues are arising in the area of modern GI imaging.This minireview article aims to briefly overview the clinical issues and challenges encountered in imaging GI diseases while highlighting our experience in the field.We also summarize the advances in clinically available diagnostic methods for evaluating different diseases of the GI tract and demonstrate our experience in the area.In conclusion,almost all imaging techniques used in imaging GI diseases can also raise many challenges that necessitate careful consideration and profound expertise in this field.
基金funded by the National Natural Science Foundation of China(No.41731284)。
文摘Tunnel seismic advance prediction can effectively reduce the construction risk during tunnel excavation.Compared with the 2-D method,the 3-D method is more conducive to describing the spatial characteristics of the geological body by adding the seismic data in the vertical direction.However,some drawbacks still need improvement in the current 3-D tunnel seismic prediction method.(1)The geometry is complex,which is destructiveness,high cost,and time-consuming,and will delay the tunnel construction schedule.(2)Illumination of the anomalous body is insufficient,and the precision of migration imaging is low.(3)Shot points are far away from the tunnel face,the energy loss at the shot points is more serious.(4)The received signals at the tunnel wall have the surface wave with strong energy when the shot points are placed on the tunnel wall.(5)The geometry is not linear,so the directional filtering method cannot be used to extract the reflection wave.To overcome the drawbacks of the current prediction method,a new 3-D symmetrical tunnel seismic prediction method is proposed.Six geophones are installed on the tunnel wall,two on the left side,two on the right side,and two on the top side.Twenty-four shot points are placed on the tunnel face and near both sides of the tunnel wall,twelve shot points on the left side and twelve shot points on the right side.The shot points will move along with the forward excavation of the tunnel.The wavefield analysis,illumination statistics,and 3-D reverse time migration imaging are used to evaluate the proposed method.The result of modeled data indicates that the proposed 3-D geometry has some advantages:(1)the geometry is simple and the geophone installation time is short;(2)it has high illumination energy,wide illumination range,and can improve the prediction distance and imaging accuracy;(3)the proposed 3-D method can better estimate the velocity of surrounding rock and is more conducive to extracting the reflection wave with high resolution.
基金Supported by the Bio&Medical Technology Development Program of the National Research Foundation(NRF)funded by the Korean government(MSIT),No.RS-2023-00223501.
文摘A recent review by Gulinac et al,provides an in-depth analysis of current clinical issues and challenges in gastrointestinal imaging.This editorial highlights the advancements in imaging techniques,including the integration of artificial intelligence and functional imaging modalities,and discusses the ongoing relevance of traditional nuclear medicine tests.The future of gastrointestinal imaging looks promising,with continuous improvements in resolution,enhanced ability to analyze color and texture beyond visual diagnosis,faster image processing,and the application of molecular imaging and nanoparticles expected to enhance diagnostic accuracy and clinical outcomes.
文摘An imaging accuracy improving method is established, within which a distance coefficient including location information between sparse array configuration and the location of defect is proposed to select higher signal- to-noise ratio data from all experimental data and then to use these selected data for elliptical imaging. Tile relationships among imaging accuracy, distance coefficient and residual direct wave are investigated, and then the residual direct wave is introduced to make the engineering application more convenient. The effectiveness of the proposed method is evaluated experimentally by sparse transducer array of a rectangle, and the results reveal that selecting experimental data of smaller distance coefficient can effectively improve imaging accuracy. Moreover, the direct wave difference increases with the decrease of the distance coefficient, which implies that the imaging accuracy can be effectively improved by using the experimental data of the larger direct wave difference.
基金supported by the National Key Research and Development Program(No.2019YFB2005503)。
文摘Aiming at the problem that the lattice feature exceeds the view field of the scanning electron microscope(SEM)measuring system,a new lattice measuring method is proposed based on integral imaging technology.When the system works,the SEM measuring system is equivalent to an integral image acquisition system.Firstly,a lattice measuring method is researched based on integral imaging theory.Secondly,the system parameters are calibrated by the VLSI lattice standard.Finally,the value of the lattice standard to be tested is determined based on the calibration parameters and the lattice measuring algorithm.The experimental results show that,compared with the traditional electron microscope measurement method,the relative error of the measured value of the algorithm is maintained within 0.2%,with the same level of measurement accuracy,but it expands the field of view of the electron microscope measurement system,which is suitable for the measurement of samples under high magnification.
基金supported by the National Natural Science Foundation of China(Nos.11474169 and 61675100)the Tianjin Natural Science Foundation(No.15JCYBJC16900)
文摘In order to improve depth extraction accuracy, a method using moving array lenslet technique(MALT) in pickup stage is proposed, which can decrease the depth interval caused by pixelation. In this method, the lenslet array is moved along the horizontal and vertical directions simultaneously for N times in a pitch to get N sets of elemental images. Computational integral imaging reconstruction method for MALT is taken to obtain the slice images of the 3 D scene, and the sum modulus(SMD) blur metric is taken on these slice images to achieve the depth information of the 3 D scene. Simulation and optical experiments are carried out to verify the feasibility of this method.
基金supported by the Young Scientists Fund of the National Natural Science Foundation of China(No.41304082)the China Postdoctoral Science Foundation(No.2016M590731)+2 种基金the Young Scientists Fund of the Natural Science Foundation of Hebei Province(No.D2014403011)the Program for Young Excellent Talents of Higher Education Institutions of Hebei Province(No.BJ2016046)the Geological survey project of China Geological Survey(No.1212011121197)
文摘We calculate the multicomponent responses of surface-hole transient electromagnetic method. The methods and models are unsuitable as geoelectric models of conductive surrounding rocks because they are based on regular local targets. We also propose a calculation and analysis scheme based on numerical simulations of the subsurface transient electromagnetic fields. In the modeling of the electromagnetic fields, the forward modeling simulations are performed by using the finite-difference time-domain method and the discrete image method, which combines the Gaver–Stehfest inverse Laplace transform with the Prony method to solve the initial electromagnetic fields. The precision in the iterative computations is ensured by using the transmission boundary conditions. For the response analysis, we customize geoelectric models consisting of near-borehole targets and conductive wall rocks and implement forward modeling simulations. The observed electric fields are converted into induced electromotive force responses using multicomponent observation devices. By comparing the transient electric fields and multicomponent responses under different conditions, we suggest that the multicomponent-induced electromotive force responses are related to the horizontal and vertical gradient variations of the transient electric field at different times. The characteristics of the response are determined by the varying the subsurface transient electromagnetic fields, i.e., diffusion, attenuation and distortion, under different conditions as well as the electromagnetic fields at the observation positions. The calculation and analysis scheme of the response consider the surrounding rocks and the anomalous field of the local targets. It therefore can account for the geological data better than conventional transient field response analysis of local targets.
基金supported by the Young Scientists Fund of the National Natural Science Foundation of China(No.41304082)the Young Scientists Fund of the Natural Science Foundation of Hebei Province(No.D2014403011)the Geological survey project of China Geological Survey(No.12120114090201)
文摘We conducted a study on the numerical calculation and response analysis of a transient electromagnetic field generated by a ground source in geological media. One solution method, the traditional discrete image method, involves complex operation, and its digital filtering algorithm requires a large number of calculations. To solve these problems, we proposed an improved discrete image method, where the following are realized： the real number of the electromagnetic field solution based on the Gaver-Stehfest algorithm for approximate inversion, the exponential approximation of the objective kernel function using the Prony method, the transient electromagnetic field according to discrete image theory, and closed-form solution of the approximate coefficients. To verify the method, we tentatively calculated the transient electromagnetic field in a homogeneous model and compared it with the results obtained from the Hankel transform digital filtering method. The results show that the method has considerable accuracy and good applicability. We then used this method to calculate the transient electromagnetic field generated by a ground magnetic dipole source in a typical geoelectric model and analyzed the horizontal component response of the induced magnetic field obtained from the ＂ground excitation-stratum measurement method. We reached the conclusion that the horizontal component response of a transient field is related to the geoelectric structure, observation time, spatial location, and others. The horizontal component response of the induced magnetic field reflects the eddy current field distribution and its vertical gradient variation. During the detection of abnormal objects, positions with a zero or comparatively large offset were selected for the drill- hole measurements or a comparatively long observation delay was adopted to reduce the influence of the ambient field on the survey results. The discrete image method and forward calculation results in this paper can be used as references for relevant research.
基金This work was supported by the Russian Science Foundation(Grant No.22-19-00765)at the Perm National Research Polytechnic University.
文摘Creating conditions to implement equilibrium processes of damage accumulation under a predictable scenario enables control over the failure of structural elements in critical states.It improves safety and reduces the probability of catastrophic behavior in case of accidents.Equilibrium damage accumulation in some cases leads to a falling part(called a postcritical stage)on the material’s stress-strain curve.It must be taken into account to assess the strength and deformation limits of composite structures.Digital image correlation method,acoustic emission(AE)signals recording,and optical microscopy were used in this paper to study the deformation and failure processes of an orthogonal-layup composite during tension in various directions to orthotropy axes.An elastic-plastic deformation model was proposed for the composite in a plane stress condition.The evolution of strain fields and neck formation were analyzed.The staging of the postcritical deformation process was described.AE signals obtained during tests were studied;characteristic damage types of a material were defined.The rationality and necessity of polymer composites’postcritical deformation stage taken into account in refined strength analysis of structures were concluded.
基金the financial support by the National Natural Science Foundation of China(Grant No.52108397)“Xiaohe”Science and Technology Talent Special Project(Grant No.2024 TJ-X06)Water Resources Science and Technology Project of Hunan Province(Grant No.XSKJ2023059-41).
文摘Cracking affected by wetting-drying cycles is a major cause of shallow failure of soft rock slopes.Knowledge of rock tensile properties and cracking behaviors helps better assess the stability of soft rock slopes.This study aims to examine the cracking behaviors and tensile strength of silty mudstone under wetting-drying cycles.The wetting-drying cycle and Brazilian splitting tests were performed on silty mudstone considering various cycle number and amplitude.The cracking behaviors of wetting-drying cycles were analyzed by digital image correlation,three-dimensional(3D)scanning technology,and scanning electron microscopy.The results reveal a spiral-like pattern of crack ratio escalation in silty mudstone,with a higher crack ratio observed during drying than wetting.Tensile strength and fracture energy correlate negatively with cycle number or amplitude,with cycle number exerting a more pronounced effect.The variance of the maximum principal strain reflects stages of initial deformation,linear deformation,strain localization,and stable deformation.The formation of strain localization zones reveals the physical process of crack propagation.Crack tip opening displacement progresses through stages of slow growth,exponential growth,and linear growth,delineating the process from crack initiation to stable extension.Failure modes of silty mudstone primarily involve tensile and tensile-shear failure,influenced by the geometric parameters of cracks induced by wetting-drying cycles.Fracture surface roughness and fractal dimension increase with cycle number due to mineral dissolution,physical erosion,and nondirectional crack propagation.Hydration-swelling and dehydration-shrinkage of clay minerals,along with absorption-drying cracking,initiate and merge cracks,leading to degradation of the rock mechanical properties.The findings could provide insights for mitigating shallow cracking of soft rock slopes under wetting-drying cycles.
基金supported by the National Natural Science Foundation of China(51774196,52304093)China Postdoctoral Science Foundation(2023M741968)Shandong Provincial Natural Science Foundation(ZR2023ME086).
文摘Soft rock is one of the common geological conditions in coal mine underground water reservoir engineering.The cross-scale correlation analysis of water erosion soft lithology deterioration is very important for the safety and stability of coal mine underground reservoir(CMUR)engineering.To address the issues of grain crowding and segmentation difficulties in cross-scale corelation analysis,as well as the limitations of traditional etching methods,this study proposes an image grain segmentation method based on deep learning algorithms,utilizing scanning electron microscopy and image process-ing techniques.The method successfully segments crowded grains and eliminates the interference from misplaced particles.In addition,indoor uniaxial compression tests were conducted to obtain the mechanical properties of sandstone samples with different water content.By quantitatively characterizing the macroscopic and microscopic deterioration degree of red sandstone samples with different water contents,the relationship between the strength changes of rock samples and the pet-rographic parameters such as grain size and grain shape is analyzed,and the influence law of soft lithology deterioration in CMUR engineering is revealed.The results indicate:(1)Water significantly weakens the mechanical properties and stability of soft rock.With increasing water content,the strength of sandstone samples continuously decreases,and the failure mode transitions from brittle to ductile failure.(2)The deterioration of micro-micro structures is the main cause of the decrease in mechanical properties of water-eroded soft rock.Grain size,grain area,and aspect ratio are negatively correlated with water content,indicating that hydrophilic minerals in soft rock dissolve under the action of water,leading to rock damage.(3)Grain size,area,and aspect ratio can serve as significant indicators for quantifying the strength changes of water-eroded soft rock.The research findings can be applied to stability assessment and disaster prevention in CMUR engineering.
基金Supported by Guizhou Provincial Science and Technology Foundation (Z103167)Youth Foundation of Guizhou University (X092012)+1 种基金the National Basic Research Program of China under Grant No. 2009CB930800National Natural Science Foundation of China under Grant Nos. 10674157 and 10875166
文摘A method using multiple mirror images of point charges is put forward to analyze the polarization of two identical conductor spheres in a uniform electrostatic field.By use of the method,the electric field distribution and the interaction force between two spheres can be calculated accurately even for very small gap between two spheres.Our results show that the magnitude of the product of the gap between two spheres and the local electric field in the center of the gap is approximately in the same order and the interaction between two spheres increases very fast as the two spheres are close to each other.We also show that the interaction force between two conductor spheres is almost same with that between two dielectric spheres with high permittivity.
基金This study was supported financially by the National Key Research and Development Program of China(Grant no.2018YFA0605902)the National Natural Science Foundation of China(Grant no.52101300)+1 种基金the Fundamental Research Funds for the Central Universities(Grant no.DUT21LK03)Joint Scientific Research Fund Project of DBJI(Grant no.ICR2102).
文摘The splitting test is a competitive alternative method to study the tensile strength of sea ice owing to its suitability for sampling.However,the approach was questioned to the neglect of local plastic deformation during the tests.In this study,splitting tests were performed on sea ice,with 32 samples subjected to the regular procedure and 8 samples subjected to the digital image correlation method.The salinity,density,and temperature were measured to determine the total porosity.With the advantage of the digital image correlation method,the full-field deformation of the ice samples could be determined.In the loading direction,the samples mainly deformed at the ice-platen contact area.In the direction vertical to the loading,deformation appears along the central line where the splitting crack occurs.Based on the distribution of the sample deformation,a modified solution was derived to calculate the tensile strength with the maximum load.Based on the modified solution,the tensile strength was further calculated together with the splitting test results.The results show that the tensile strength has a negative correlation with the total porosity,which agrees with previous studies based on uniaxial tension tests.
基金funded by the National Natural Science Foundation of China (Grant Nos.11003031 and 10873024)supported by the National Astronomical Observatories’ Special Fund for AstronomyPart of the workdescribed in this paper was carried out at California State University Northridge,with support from the National Science Foundation under grant ATM-0841440
文摘Wavefront sensing from multiple focal plane images is a promising technique for high-contrast imaging systems.However,the wavefront error of an optics system can be properly reconstructed only when it is very small.This paper presents an iterative optimization algorithm for the direct measurement of large static wavefront errors from only one focal plane image.We first measure the intensity of the pupil image to get the pupil function of the system and acquire the aberrated image on the focal plane with a phase error that will be measured.Then we induce a dynamic phase on the tested pupil function and calculate the associated intensity of the reconstructed image on the focal plane.The algorithm will then try to minimize the intensity difference between the reconstructed image and the aberrated test image in the focal plane,where the induced phase is a variable of the optimization algorithm.The simulation shows that the wavefront of an optical system can theoretically be reconstructed with high precision,which indicates that such an iterative algorithm may be an effective way to perform wavefront sensing for high-contrast imaging systems.
