This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert ...This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert triggering and light curve generation for transient sources.By applying the STRIP pipeline to both simulated and real observational data of the Mini-Si Tian survey,it successfully identified various types of variable sources,including stellar flares,supernovae,variable stars,and asteroids,while meeting requirements of reduction speed within 5 minutes.For the real observational data set,the pipeline detected one flare event,127 variable stars,and14 asteroids from three monitored sky regions.Additionally,two data sets were generated:one,a real-bogus training data set comprising 218,818 training samples,and the other,a variable star light curve data set with 421instances.These data sets will be used to train machine learning algorithms,which are planned for future integration into STRIP.展开更多
The dipping process was recorded firstly by high-speed camera system; acceleration time, speed, and dipping time were set by the control system of dipping bed, respectively. By image processing of dipping process base...The dipping process was recorded firstly by high-speed camera system; acceleration time, speed, and dipping time were set by the control system of dipping bed, respectively. By image processing of dipping process based on Otsu's method, it was found that low-viscosity flux glue eliminates the micelle effectively, very low speed also leads to small micelle hidden between the bumps, and this small micelle and hidden phenomenon disappeared when the speed is ≥0.2 cm s-1. Dipping flux quantity of the bump decreases by about 100 square pixels when flux viscosity is reduced from4,500 to 3,500 mpa s. For the 3,500 mpa s viscosity glue, dipping flux quantity increases with the increase of the speed and decreases with the increase of the speed after the speed is up to 0.8 cm s-1. The stable time of dipping glue can be obtained by real-time curve of dipping flux quantity and is only 80–90 ms when dipping speed is from 1.6 to 4.0 cm s-1. Dipping flux quantity has an increasing trend for acceleration time and has a decreasing trend for acceleration. Dipping flux quantity increases with the increase of dipping time, and is becoming saturated when the time is ≥55 ms.展开更多
Karst fractures serve as crucial seepage channels and storage spaces for carbonate natural gas reservoirs,and electrical image logs are vital data for visualizing and characterizing such fractures.However,the conventi...Karst fractures serve as crucial seepage channels and storage spaces for carbonate natural gas reservoirs,and electrical image logs are vital data for visualizing and characterizing such fractures.However,the conventional approach of identifying fractures using electrical image logs predominantly relies on manual processes that are not only time-consuming but also highly subjective.In addition,the heterogeneity and strong dissolution tendency of karst carbonate reservoirs lead to complexity and variety in fracture geometry,which makes it difficult to accurately identify fractures.In this paper,the electrical image logs network(EILnet)da deep-learning-based intelligent semantic segmentation model with a selective attention mechanism and selective feature fusion moduledwas created to enable the intelligent identification and segmentation of different types of fractures through electrical logging images.Data from electrical image logs representing structural and induced fractures were first selected using the sliding window technique before image inpainting and data augmentation were implemented for these images to improve the generalizability of the model.Various image-processing tools,including the bilateral filter,Laplace operator,and Gaussian low-pass filter,were also applied to the electrical logging images to generate a multi-attribute dataset to help the model learn the semantic features of the fractures.The results demonstrated that the EILnet model outperforms mainstream deep-learning semantic segmentation models,such as Fully Convolutional Networks(FCN-8s),U-Net,and SegNet,for both the single-channel dataset and the multi-attribute dataset.The EILnet provided significant advantages for the single-channel dataset,and its mean intersection over union(MIoU)and pixel accuracy(PA)were 81.32%and 89.37%,respectively.In the case of the multi-attribute dataset,the identification capability of all models improved to varying degrees,with the EILnet achieving the highest MIoU and PA of 83.43%and 91.11%,respectively.Further,applying the EILnet model to various blind wells demonstrated its ability to provide reliable fracture identification,thereby indicating its promising potential applications.展开更多
A new surface inspection system for cold rolled strips based on image processing is introduced. The system is equipped withtwo different illumination structures and CCD matrix cameras. The structure and image processi...A new surface inspection system for cold rolled strips based on image processing is introduced. The system is equipped withtwo different illumination structures and CCD matrix cameras. The structure and image processing of the inspection system are described. Some efficient algorithms for image processing and classification are presented. The system is tested with strip samples fromcold rolling plants. The results show that the system can detect and recognize six common defects of cold rolled strips successfully.展开更多
Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gra...Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gray-level and binary images, the linear texture of ship wake in oceanic clutter can be well detected. It has been applied to the automatic detection of a moving ship from the SEASAT SAR image. The results show that this algorithm is well robust in a strong noisy background and is not very sensitive to the threshold parameter and the working window size.展开更多
An improvement detecting method was proposed according to the disadvantages of testing method of optical axes parallelism of shipboard photoelectrical theodolite (short for theodolite) based on image processing. Point...An improvement detecting method was proposed according to the disadvantages of testing method of optical axes parallelism of shipboard photoelectrical theodolite (short for theodolite) based on image processing. Pointolite replaced 0.2'' collimator to reduce the errors of crosshair images processing and improve the quality of image. What’s more, the high quality images could help to optimize the image processing method and the testing accuracy. The errors between the trial results interpreted by software and the results tested in dock were less than 10'', which indicated the improve method had some actual application values.展开更多
In the present study,the laws of smoke diffusion during forest fires are determined using the general principles of fluid mechanics and dedicated data obtained experimentally using an“ad hoc”imaging technology.Exper...In the present study,the laws of smoke diffusion during forest fires are determined using the general principles of fluid mechanics and dedicated data obtained experimentally using an“ad hoc”imaging technology.Experimental images mimicking smoke in a real scenario are used to extract some“statistics”.These in turn are used to obtain the“divergence”of the flow(this fluid-dynamic parameter describing the amount of air that converges to a certain place from the surroundings or vice versa).The results show that the divergence of the smoke depends on the outside airflow and finally tends to zero as time passes.Most remarkably,compared with clouds and fog,smoke has a unique dynamic time-evolution curve.The present study demonstrates that as long as image processing technology and intelligent monitoring technology are used to monitor the gas flow in a forest,the occurrence of forest fires can be quickly diagnosed.展开更多
This study seeks to establish a novel,semi-automatic system that utilizes Industry 4.0 principles to effectively determine both acceptable and rejectable concrete cubes with regard to their failure modes,significantly...This study seeks to establish a novel,semi-automatic system that utilizes Industry 4.0 principles to effectively determine both acceptable and rejectable concrete cubes with regard to their failure modes,significantly contributing to the dependability of concrete quality evaluations.The study utilizes image processing and machine learning(ML)methods,namely object detectionmodels such as YOLOv8 and Convolutional Neural Networks(CNNs),to evaluate images of concrete cubes.These models are trained and validated on an extensive database of annotated images from real-world and laboratory conditions.Preliminary results indicate a good performance in the classification of concrete cube failure modes.The proposed system accurately identifies cracks,determines the severity of damage to structures,indicating the potential to minimize human errors and discrepancies that might occur through the current techniques to detect the failure mode of concrete cubes.Thedeveloped systemcould significantly improve the reliability of concrete cube assessments,reduce resource wastage,and contribute to more sustainable construction practices.By minimizing material costs and errors,this innovation supports the construction industry’s move towards sustainability.展开更多
In micro milling machining,tool wear directly affects workpiece quality and accuracy,making effective tool wear monitoring a key factor in ensuring product integrity.The use of machine vision-based methods can provide...In micro milling machining,tool wear directly affects workpiece quality and accuracy,making effective tool wear monitoring a key factor in ensuring product integrity.The use of machine vision-based methods can provide an intuitive and efficient representation of tool wear conditions.However,micro milling tools have non-flat flanks,thin coatings can peel off,and spindle orientation is uncertain during downtime.These factors result in low pixel values,uneven illumination,and arbitrary tool position.To address this,we propose an image-based tool wear monitoring method.It combines multiple algorithms to restore lost pixels due to uneven illumination during segmentation and accurately extract wear areas.Experimental results demonstrate that the proposed algorithm exhibits high robustness to such images,effectively addressing the effects of illumination and spindle orientation.Additionally,the algorithm has low complexity,fast execution time,and significantly reduces the detection time in situ.展开更多
The China Space Station Telescope(CSST)is a 2 m three-mirror anastigmat equipped with a Fast Steering Mirror(FSM),which is part of its precision image stabilization system.The FSM is used to compensate for residuals f...The China Space Station Telescope(CSST)is a 2 m three-mirror anastigmat equipped with a Fast Steering Mirror(FSM),which is part of its precision image stabilization system.The FSM is used to compensate for residuals from the previous stage of the image stabilization system.However,a new type of image stabilization residual caused by image rotation and projection distortion is introduced when the FSM performs tip-tilt adjustments,reducing both the image stabilization accuracy and the absolute pointing accuracy of the CSST.In this paper,we propose a scheme to compute the image stabilization residuals across the full field of view(FOV)by using a reference star as the target for stabilization control,which can be utilized for subsequent image position correction.To achieve this,we developed a linear optical model for image point displacement by simplifying an existing image point displacement model and incorporating more readily available parameters.The computational accuracy of the new model is equivalent to that of the original,with computational differences of less than 0.03μm.Based on this linear model,we established a calculation model for image stabilization residuals,including those due to image rotation and projection distortion caused by FSM tip-tilt adjustments.This model provides a theoretical foundation for quantifying such residuals during the image stabilization process.Finally,the results of testing using this scheme are provided.Experimental results demonstrate that within the observation FOV of the CSST,when the FSM tilts by(1″,1″),the maximum absolute value of the image stabilization residuals accounts for 20%of the total image stabilization accuracy requirement.This finding underscores the necessity of computing and correcting these residuals to meet performance requirements.展开更多
Deep learning now underpins many state-of-the-art systems for biomedical image and signal processing,enabling automated lesion detection,physiological monitoring,and therapy planning with accuracy that rivals expert p...Deep learning now underpins many state-of-the-art systems for biomedical image and signal processing,enabling automated lesion detection,physiological monitoring,and therapy planning with accuracy that rivals expert performance.This survey reviews the principal model families as convolutional,recurrent,generative,reinforcement,autoencoder,and transfer-learning approaches as emphasising how their architectural choices map to tasks such as segmentation,classification,reconstruction,and anomaly detection.A dedicated treatment of multimodal fusion networks shows how imaging features can be integrated with genomic profiles and clinical records to yield more robust,context-aware predictions.To support clinical adoption,we outline post-hoc explainability techniques(Grad-CAM,SHAP,LIME)and describe emerging intrinsically interpretable designs that expose decision logic to end users.Regulatory guidance from the U.S.FDA,the European Medicines Agency,and the EU AI Act is summarised,linking transparency and lifecycle-monitoring requirements to concrete development practices.Remaining challenges as data imbalance,computational cost,privacy constraints,and cross-domain generalization are discussed alongside promising solutions such as federated learning,uncertainty quantification,and lightweight 3-D architectures.The article therefore offers researchers,clinicians,and policymakers a concise,practice-oriented roadmap for deploying trustworthy deep-learning systems in healthcare.展开更多
Structural Health Monitoring(SHM)systems play a key role in managing buildings and infrastructure by delivering vital insights into their strength and structural integrity.There is a need for more efficient techniques...Structural Health Monitoring(SHM)systems play a key role in managing buildings and infrastructure by delivering vital insights into their strength and structural integrity.There is a need for more efficient techniques to detect defects,as traditional methods are often prone to human error,and this issue is also addressed through image processing(IP).In addition to IP,automated,accurate,and real-time detection of structural defects,such as cracks,corrosion,and material degradation that conventional inspection techniques may miss,is made possible by Artificial Intelligence(AI)technologies like Machine Learning(ML)and Deep Learning(DL).This review examines the integration of computer vision and AI techniques in Structural Health Monitoring(SHM),investigating their effectiveness in detecting various forms of structural deterioration.Also,it evaluates ML and DL models in SHM for their accuracy in identifying and assessing structural damage,ultimately enhancing safety,durability,and maintenance practices in the field.Key findings reveal that AI-powered approaches,especially those utilizing IP and DL models like CNNs,significantly improve detection efficiency and accuracy,with reported accuracies in various SHM tasks.However,significant research gaps remain,including challenges with the consistency,quality,and environmental resilience of image data,a notable lack of standardized models and datasets for training across diverse structures,and concerns regarding computational costs,model interpretability,and seamless integration with existing systems.Future work should focus on developing more robust models through data augmentation,transfer learning,and hybrid approaches,standardizing protocols,and fostering interdisciplinary collaboration to overcome these limitations and achieve more reliable,scalable,and affordable SHM systems.展开更多
As a pathfinder of the SiTian project,the Mini-SiTian(MST)Array,employed three commercial CMOS cameras,represents a next-generation,cost-effective optical time-domain survey project.This paper focuses primarily on the...As a pathfinder of the SiTian project,the Mini-SiTian(MST)Array,employed three commercial CMOS cameras,represents a next-generation,cost-effective optical time-domain survey project.This paper focuses primarily on the precise data processing pipeline designed for wide-field,CMOS-based devices,including the removal of instrumental effects,astrometry,photometry,and flux calibration.When applying this pipeline to approximately3000 observations taken in the Field 02(f02)region by MST,the results demonstrate a remarkable astrometric precision of approximately 70–80 mas(about 0.1 pixel),an impressive calibration accuracy of approximately1 mmag in the MST zero points,and a photometric accuracy of about 4 mmag for bright stars.Our studies demonstrate that MST CMOS can achieve photometric accuracy comparable to that of CCDs,highlighting the feasibility of large-scale CMOS-based optical time-domain surveys and their potential applications for cost optimization in future large-scale time-domain surveys,like the SiTian project.展开更多
All-optical image processing has been viewed as a promising technique for its high computation speed and low power consumption.However,current methods are often restricted to few functionalities and low reconfigurabil...All-optical image processing has been viewed as a promising technique for its high computation speed and low power consumption.However,current methods are often restricted to few functionalities and low reconfigurabilities,which cannot meet the growing demand for device integration and scenario adaptation in next-generation vision regimes.Here,we propose and experimentally demonstrate a bilayer liquid crystal computing platform for reconfigurable image processing.Under different in-situ/ex-situ twisted/untwisted conditions of the layers,our approach allows for eight kinds of image processing functions,including one/two-channel bright field imaging,one/two-channel vortex filtering,horizontally/vertically one-dimensional edge detection,vertex detection,and photonic spin Hall effect-based resolution adjustable edge detection.A unified theoretical framework for this scheme is established on the transfer function theory,which coincides well with the experimental results.The proposed method offers an easily-switchable multi-functional solution to optical image processing by introducing mechanical degrees of freedom,which may enable emerging applications in computer vision,autonomous driving,and biomedical microscopy.展开更多
Against the backdrop of massive sky survey data,the automated detection,classification,and parameter computation of targets have emerged as critical areas demanding urgent breakthroughs.However,in detection and classi...Against the backdrop of massive sky survey data,the automated detection,classification,and parameter computation of targets have emerged as critical areas demanding urgent breakthroughs.However,in detection and classification tasks,model accuracy is often constrained by issues such as small target sizes and insufficient feature information.To address this challenge,we innovatively constructs a fully automated astronomical image analysis pipeline that combines point source detection and classification,galaxy morphological classification,and parameter computation,forming an end-to-end solution.This pipeline achieves automated detection and morphological classification of both point sources and extended sources,and it is also able to compute the basic parameters of galaxy targets.The pipeline first accomplishes the detection and localization of target sources using the YOLOv9 model,and then leverages the optimized ResNet-AE model to initially categorize the detected targets into three major classes:stars,quasars,and galaxies.To tackle the problem of small sizes in some galaxy targets,we filtered out samples with larger sizes and distinct contours.Drawing on morphological characteristics,these samples were further classified into six categories via the DenseNet-SE4 model:barred spiral galaxies,cigar galaxies,elliptical galaxies,intermediate galaxies,spiral galaxies,and irregular galaxies.Following this classification,parameter computation was conducted on the targets.Experimental results show that the detection model has achieved better performance than previous studies,with a mean average precision of 85.20%at Intersection over Union values ranging from 0.5 to 0.95.Both classification models also reached an accuracy of over 85%on the test set.Compared with classical CNN networks,these two classification models boast higher precision,and the computation of target parameters has also yielded reliable outcomes.Experiments verify that this pipeline can act as a supplementary tool for astronomical image processing and be applied to data mining and analysis work in sky surveys.展开更多
Breast cancer remains one of the most pressing global health concerns,and early detection plays a crucial role in improving survival rates.Integrating digital mammography with computational techniques and advanced ima...Breast cancer remains one of the most pressing global health concerns,and early detection plays a crucial role in improving survival rates.Integrating digital mammography with computational techniques and advanced image processing has significantly enhanced the ability to identify abnormalities.However,existing methodologies face persistent challenges,including low image contrast,noise interference,and inaccuracies in segmenting regions of interest.To address these limitations,this study introduces a novel computational framework for analyzing mammographic images,evaluated using the Mammographic Image Analysis Society(MIAS)dataset comprising 322 samples.The proposed methodology follows a structured three-stage approach.Initially,mammographic scans are classified using the Breast Imaging Reporting and Data System(BI-RADS),ensuring systematic and standardized image analysis.Next,the pectoral muscle,which can interfere with accurate segmentation,is effectively removed to refine the region of interest(ROI).The final stage involves an advanced image pre-processing module utilizing Independent Component Analysis(ICA)to enhance contrast,suppress noise,and improve image clarity.Following these enhancements,a robust segmentation technique is employed to delineated abnormal regions.Experimental results validate the efficiency of the proposed framework,demonstrating a significant improvement in the Effective Measure of Enhancement(EME)and a 3 dB increase in Peak Signal-to-Noise Ratio(PSNR),indicating superior image quality.The model also achieves an accuracy of approximately 97%,surpassing contemporary techniques evaluated on the MIAS dataset.Furthermore,its ability to process mammograms across all BI-RADS categories highlights its adaptability and reliability for clinical applications.This study presents an advanced and dependable computational framework for mammographic image analysis,effectively addressing critical challenges in noise reduction,contrast enhancement,and segmentation precision.The proposed approach lays the groundwork for seamless integration into computer-aided diagnostic(CAD)systems,with the potential to significantly enhance early breast cancer detection and contribute to improved patient outcomes.展开更多
Based on the model of a formal neuron proposed by McCulloch and Pitts,a kind ofneural circuit,which is a CMOS Variable Threshold Logic(VTL)circuit,is given in this paperconsidering the features of the binary image pro...Based on the model of a formal neuron proposed by McCulloch and Pitts,a kind ofneural circuit,which is a CMOS Variable Threshold Logic(VTL)circuit,is given in this paperconsidering the features of the binary image processing system.The theoretical analysis,andthe simulations for the building block circuits such as D/A converters,comparator and so on aregiven.The layout design of the whole circuit are also given.The binary image processing can berealized by using the VTL circuit combined with its external auxiliary circuits.展开更多
Important in many different sectors of the industry, the determination of stream velocity has become more and more important due to measurements precision necessity, in order to determine the right production rates, d...Important in many different sectors of the industry, the determination of stream velocity has become more and more important due to measurements precision necessity, in order to determine the right production rates, determine the volumetric production of undesired fluid, establish automated controls based on these measurements avoiding over-flooding or over-production, guaranteeing accurate predictive maintenance, etc. Difficulties being faced have been the determination of the velocity of specific fluids embedded in some others, for example, determining the gas bubbles stream velocity flowing throughout liquid fluid phase. Although different and already applicable methods have been researched and already implemented within the industry, a non-intrusive automated way of providing those stream velocities has its importance, and may have a huge impact in projects budget. Knowing the importance of its determination, this developed script uses a methodology of breaking-down real-time videos media into frame images, analyzing by pixel correlations possible superposition matches for further gas bubbles stream velocity estimation. In raw sense, the script bases itself in functions and procedures already available in MatLab, which can be used for image processing and treatments, allowing the methodology to be implemented. Its accuracy after the running test was of around 97% (ninety-seven percent);the raw source code with comments had almost 3000 (three thousand) characters;and the hardware placed for running the code was an Intel Core Duo 2.13 [Ghz] and 2 [Gb] RAM memory capable workstation. Even showing good results, it could be stated that just the end point correlations were actually getting to the final solution. So that, making use of self-learning functions or neural network, one could surely enhance the capability of the application to be run in real-time without getting exhaust by iterative loops.展开更多
The scope of this project was to investigate the possibility of application of Image Processing Technique in the field of Shaft Alignment process. Misalignment of shaft using image processing software Visionbuilder wa...The scope of this project was to investigate the possibility of application of Image Processing Technique in the field of Shaft Alignment process. Misalignment of shaft using image processing software Visionbuilder was calculated. The further purpose of this project was to check whether the image processing technique can be used in bone transplant surgery. The model of the hip was used for the experimentation purpose. Image processing software Visionbuilder was used to match the profiles of the bone before implant and bone after implant.展开更多
基金supported from the Strategic Pioneer Program of the Astronomy Large-Scale Scientific FacilityChinese Academy of Sciences and the Science and Education Integration Funding of University of Chinese Academy of Sciences+9 种基金the supports from the National Key Basic R&D Program of China via 2023YFA1608303the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0550103)the supports from the Strategic Priority Research Program of the Chinese Academy of Sciences under grant No.XDB0550000the National Natural Science Foundation of China(NSFC,grant Nos.12422303 and12261141690)the supports from the NSFC(grant No.12403024)supports from the NSFC through grant Nos.11988101 and 11933004the Postdoctoral Fellowship Program of CPSF under grant No.GZB20240731the Young Data Scientist Project of the National Astronomical Data Centerthe China Post-doctoral Science Foundation(No.2023M743447)supports from the New Cornerstone Science Foundation through the New Cornerstone Investigator Program and the XPLORER PRIZE。
文摘This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert triggering and light curve generation for transient sources.By applying the STRIP pipeline to both simulated and real observational data of the Mini-Si Tian survey,it successfully identified various types of variable sources,including stellar flares,supernovae,variable stars,and asteroids,while meeting requirements of reduction speed within 5 minutes.For the real observational data set,the pipeline detected one flare event,127 variable stars,and14 asteroids from three monitored sky regions.Additionally,two data sets were generated:one,a real-bogus training data set comprising 218,818 training samples,and the other,a variable star light curve data set with 421instances.These data sets will be used to train machine learning algorithms,which are planned for future integration into STRIP.
基金supported by National Natural Science Foundation of China (No. 51275536)the China High Technology R&D Program 973 (No. 2015CB057206)
文摘The dipping process was recorded firstly by high-speed camera system; acceleration time, speed, and dipping time were set by the control system of dipping bed, respectively. By image processing of dipping process based on Otsu's method, it was found that low-viscosity flux glue eliminates the micelle effectively, very low speed also leads to small micelle hidden between the bumps, and this small micelle and hidden phenomenon disappeared when the speed is ≥0.2 cm s-1. Dipping flux quantity of the bump decreases by about 100 square pixels when flux viscosity is reduced from4,500 to 3,500 mpa s. For the 3,500 mpa s viscosity glue, dipping flux quantity increases with the increase of the speed and decreases with the increase of the speed after the speed is up to 0.8 cm s-1. The stable time of dipping glue can be obtained by real-time curve of dipping flux quantity and is only 80–90 ms when dipping speed is from 1.6 to 4.0 cm s-1. Dipping flux quantity has an increasing trend for acceleration time and has a decreasing trend for acceleration. Dipping flux quantity increases with the increase of dipping time, and is becoming saturated when the time is ≥55 ms.
基金the National Natural Science Foundation of China(42472194,42302153,and 42002144)the Fundamental Research Funds for the Central Univer-sities(22CX06002A).
文摘Karst fractures serve as crucial seepage channels and storage spaces for carbonate natural gas reservoirs,and electrical image logs are vital data for visualizing and characterizing such fractures.However,the conventional approach of identifying fractures using electrical image logs predominantly relies on manual processes that are not only time-consuming but also highly subjective.In addition,the heterogeneity and strong dissolution tendency of karst carbonate reservoirs lead to complexity and variety in fracture geometry,which makes it difficult to accurately identify fractures.In this paper,the electrical image logs network(EILnet)da deep-learning-based intelligent semantic segmentation model with a selective attention mechanism and selective feature fusion moduledwas created to enable the intelligent identification and segmentation of different types of fractures through electrical logging images.Data from electrical image logs representing structural and induced fractures were first selected using the sliding window technique before image inpainting and data augmentation were implemented for these images to improve the generalizability of the model.Various image-processing tools,including the bilateral filter,Laplace operator,and Gaussian low-pass filter,were also applied to the electrical logging images to generate a multi-attribute dataset to help the model learn the semantic features of the fractures.The results demonstrated that the EILnet model outperforms mainstream deep-learning semantic segmentation models,such as Fully Convolutional Networks(FCN-8s),U-Net,and SegNet,for both the single-channel dataset and the multi-attribute dataset.The EILnet provided significant advantages for the single-channel dataset,and its mean intersection over union(MIoU)and pixel accuracy(PA)were 81.32%and 89.37%,respectively.In the case of the multi-attribute dataset,the identification capability of all models improved to varying degrees,with the EILnet achieving the highest MIoU and PA of 83.43%and 91.11%,respectively.Further,applying the EILnet model to various blind wells demonstrated its ability to provide reliable fracture identification,thereby indicating its promising potential applications.
文摘A new surface inspection system for cold rolled strips based on image processing is introduced. The system is equipped withtwo different illumination structures and CCD matrix cameras. The structure and image processing of the inspection system are described. Some efficient algorithms for image processing and classification are presented. The system is tested with strip samples fromcold rolling plants. The results show that the system can detect and recognize six common defects of cold rolled strips successfully.
基金This project was supported by the National Natural Science Foundation of China (No. 49831060).
文摘Using the Radon transform and morphological image processing, an algorithm for ship's wake detection in the SAR (synthetic aperture radar) image is developed. Being manipulated in the Radon space to invert the gray-level and binary images, the linear texture of ship wake in oceanic clutter can be well detected. It has been applied to the automatic detection of a moving ship from the SEASAT SAR image. The results show that this algorithm is well robust in a strong noisy background and is not very sensitive to the threshold parameter and the working window size.
文摘An improvement detecting method was proposed according to the disadvantages of testing method of optical axes parallelism of shipboard photoelectrical theodolite (short for theodolite) based on image processing. Pointolite replaced 0.2'' collimator to reduce the errors of crosshair images processing and improve the quality of image. What’s more, the high quality images could help to optimize the image processing method and the testing accuracy. The errors between the trial results interpreted by software and the results tested in dock were less than 10'', which indicated the improve method had some actual application values.
基金This work was supported by Civil Engineering Specialty of Brand Construction Point of Private Colleges and Universities in Henan Province(No.ZLG201702).
文摘In the present study,the laws of smoke diffusion during forest fires are determined using the general principles of fluid mechanics and dedicated data obtained experimentally using an“ad hoc”imaging technology.Experimental images mimicking smoke in a real scenario are used to extract some“statistics”.These in turn are used to obtain the“divergence”of the flow(this fluid-dynamic parameter describing the amount of air that converges to a certain place from the surroundings or vice versa).The results show that the divergence of the smoke depends on the outside airflow and finally tends to zero as time passes.Most remarkably,compared with clouds and fog,smoke has a unique dynamic time-evolution curve.The present study demonstrates that as long as image processing technology and intelligent monitoring technology are used to monitor the gas flow in a forest,the occurrence of forest fires can be quickly diagnosed.
文摘This study seeks to establish a novel,semi-automatic system that utilizes Industry 4.0 principles to effectively determine both acceptable and rejectable concrete cubes with regard to their failure modes,significantly contributing to the dependability of concrete quality evaluations.The study utilizes image processing and machine learning(ML)methods,namely object detectionmodels such as YOLOv8 and Convolutional Neural Networks(CNNs),to evaluate images of concrete cubes.These models are trained and validated on an extensive database of annotated images from real-world and laboratory conditions.Preliminary results indicate a good performance in the classification of concrete cube failure modes.The proposed system accurately identifies cracks,determines the severity of damage to structures,indicating the potential to minimize human errors and discrepancies that might occur through the current techniques to detect the failure mode of concrete cubes.Thedeveloped systemcould significantly improve the reliability of concrete cube assessments,reduce resource wastage,and contribute to more sustainable construction practices.By minimizing material costs and errors,this innovation supports the construction industry’s move towards sustainability.
基金Supported by National Natural Science Foundation of China(Grant No.52175528)。
文摘In micro milling machining,tool wear directly affects workpiece quality and accuracy,making effective tool wear monitoring a key factor in ensuring product integrity.The use of machine vision-based methods can provide an intuitive and efficient representation of tool wear conditions.However,micro milling tools have non-flat flanks,thin coatings can peel off,and spindle orientation is uncertain during downtime.These factors result in low pixel values,uneven illumination,and arbitrary tool position.To address this,we propose an image-based tool wear monitoring method.It combines multiple algorithms to restore lost pixels due to uneven illumination during segmentation and accurately extract wear areas.Experimental results demonstrate that the proposed algorithm exhibits high robustness to such images,effectively addressing the effects of illumination and spindle orientation.Additionally,the algorithm has low complexity,fast execution time,and significantly reduces the detection time in situ.
基金financially supported by the National Key R&D Program of China(2022YFB3806300)。
文摘The China Space Station Telescope(CSST)is a 2 m three-mirror anastigmat equipped with a Fast Steering Mirror(FSM),which is part of its precision image stabilization system.The FSM is used to compensate for residuals from the previous stage of the image stabilization system.However,a new type of image stabilization residual caused by image rotation and projection distortion is introduced when the FSM performs tip-tilt adjustments,reducing both the image stabilization accuracy and the absolute pointing accuracy of the CSST.In this paper,we propose a scheme to compute the image stabilization residuals across the full field of view(FOV)by using a reference star as the target for stabilization control,which can be utilized for subsequent image position correction.To achieve this,we developed a linear optical model for image point displacement by simplifying an existing image point displacement model and incorporating more readily available parameters.The computational accuracy of the new model is equivalent to that of the original,with computational differences of less than 0.03μm.Based on this linear model,we established a calculation model for image stabilization residuals,including those due to image rotation and projection distortion caused by FSM tip-tilt adjustments.This model provides a theoretical foundation for quantifying such residuals during the image stabilization process.Finally,the results of testing using this scheme are provided.Experimental results demonstrate that within the observation FOV of the CSST,when the FSM tilts by(1″,1″),the maximum absolute value of the image stabilization residuals accounts for 20%of the total image stabilization accuracy requirement.This finding underscores the necessity of computing and correcting these residuals to meet performance requirements.
基金supported by the Science Committee of the Ministry of Higher Education and Science of the Republic of Kazakhstan within the framework of grant AP23489899“Applying Deep Learning and Neuroimaging Methods for Brain Stroke Diagnosis”.
文摘Deep learning now underpins many state-of-the-art systems for biomedical image and signal processing,enabling automated lesion detection,physiological monitoring,and therapy planning with accuracy that rivals expert performance.This survey reviews the principal model families as convolutional,recurrent,generative,reinforcement,autoencoder,and transfer-learning approaches as emphasising how their architectural choices map to tasks such as segmentation,classification,reconstruction,and anomaly detection.A dedicated treatment of multimodal fusion networks shows how imaging features can be integrated with genomic profiles and clinical records to yield more robust,context-aware predictions.To support clinical adoption,we outline post-hoc explainability techniques(Grad-CAM,SHAP,LIME)and describe emerging intrinsically interpretable designs that expose decision logic to end users.Regulatory guidance from the U.S.FDA,the European Medicines Agency,and the EU AI Act is summarised,linking transparency and lifecycle-monitoring requirements to concrete development practices.Remaining challenges as data imbalance,computational cost,privacy constraints,and cross-domain generalization are discussed alongside promising solutions such as federated learning,uncertainty quantification,and lightweight 3-D architectures.The article therefore offers researchers,clinicians,and policymakers a concise,practice-oriented roadmap for deploying trustworthy deep-learning systems in healthcare.
文摘Structural Health Monitoring(SHM)systems play a key role in managing buildings and infrastructure by delivering vital insights into their strength and structural integrity.There is a need for more efficient techniques to detect defects,as traditional methods are often prone to human error,and this issue is also addressed through image processing(IP).In addition to IP,automated,accurate,and real-time detection of structural defects,such as cracks,corrosion,and material degradation that conventional inspection techniques may miss,is made possible by Artificial Intelligence(AI)technologies like Machine Learning(ML)and Deep Learning(DL).This review examines the integration of computer vision and AI techniques in Structural Health Monitoring(SHM),investigating their effectiveness in detecting various forms of structural deterioration.Also,it evaluates ML and DL models in SHM for their accuracy in identifying and assessing structural damage,ultimately enhancing safety,durability,and maintenance practices in the field.Key findings reveal that AI-powered approaches,especially those utilizing IP and DL models like CNNs,significantly improve detection efficiency and accuracy,with reported accuracies in various SHM tasks.However,significant research gaps remain,including challenges with the consistency,quality,and environmental resilience of image data,a notable lack of standardized models and datasets for training across diverse structures,and concerns regarding computational costs,model interpretability,and seamless integration with existing systems.Future work should focus on developing more robust models through data augmentation,transfer learning,and hybrid approaches,standardizing protocols,and fostering interdisciplinary collaboration to overcome these limitations and achieve more reliable,scalable,and affordable SHM systems.
基金supported by the National Key Basic R&D Program of China via 2023YFA1608303the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0550103)+3 种基金the National Science Foundation of China 12422303,12403024,12222301,12173007,and 12261141690the Postdoctoral Fellowship Program of CPSF under grant Number GZB20240731the Young Data Scientist Project of the National Astronomical Data Center,and the China Post-doctoral Science Foundation No.2023M743447support from the NSFC through grant No.12303039 and No.12261141690.
文摘As a pathfinder of the SiTian project,the Mini-SiTian(MST)Array,employed three commercial CMOS cameras,represents a next-generation,cost-effective optical time-domain survey project.This paper focuses primarily on the precise data processing pipeline designed for wide-field,CMOS-based devices,including the removal of instrumental effects,astrometry,photometry,and flux calibration.When applying this pipeline to approximately3000 observations taken in the Field 02(f02)region by MST,the results demonstrate a remarkable astrometric precision of approximately 70–80 mas(about 0.1 pixel),an impressive calibration accuracy of approximately1 mmag in the MST zero points,and a photometric accuracy of about 4 mmag for bright stars.Our studies demonstrate that MST CMOS can achieve photometric accuracy comparable to that of CCDs,highlighting the feasibility of large-scale CMOS-based optical time-domain surveys and their potential applications for cost optimization in future large-scale time-domain surveys,like the SiTian project.
基金supported in part by the National Natural Science Foundation of China(12421005,12374273,and 61805077)in part by the Natural Science Foundation of Hunan Province(2025JJ50046)in part by the Hunan Provincial Major Sci-Tech Program(2023ZJ1010)。
文摘All-optical image processing has been viewed as a promising technique for its high computation speed and low power consumption.However,current methods are often restricted to few functionalities and low reconfigurabilities,which cannot meet the growing demand for device integration and scenario adaptation in next-generation vision regimes.Here,we propose and experimentally demonstrate a bilayer liquid crystal computing platform for reconfigurable image processing.Under different in-situ/ex-situ twisted/untwisted conditions of the layers,our approach allows for eight kinds of image processing functions,including one/two-channel bright field imaging,one/two-channel vortex filtering,horizontally/vertically one-dimensional edge detection,vertex detection,and photonic spin Hall effect-based resolution adjustable edge detection.A unified theoretical framework for this scheme is established on the transfer function theory,which coincides well with the experimental results.The proposed method offers an easily-switchable multi-functional solution to optical image processing by introducing mechanical degrees of freedom,which may enable emerging applications in computer vision,autonomous driving,and biomedical microscopy.
基金supported by the National Natural Science Foundation of China(NSFC,grant No.U1731128)。
文摘Against the backdrop of massive sky survey data,the automated detection,classification,and parameter computation of targets have emerged as critical areas demanding urgent breakthroughs.However,in detection and classification tasks,model accuracy is often constrained by issues such as small target sizes and insufficient feature information.To address this challenge,we innovatively constructs a fully automated astronomical image analysis pipeline that combines point source detection and classification,galaxy morphological classification,and parameter computation,forming an end-to-end solution.This pipeline achieves automated detection and morphological classification of both point sources and extended sources,and it is also able to compute the basic parameters of galaxy targets.The pipeline first accomplishes the detection and localization of target sources using the YOLOv9 model,and then leverages the optimized ResNet-AE model to initially categorize the detected targets into three major classes:stars,quasars,and galaxies.To tackle the problem of small sizes in some galaxy targets,we filtered out samples with larger sizes and distinct contours.Drawing on morphological characteristics,these samples were further classified into six categories via the DenseNet-SE4 model:barred spiral galaxies,cigar galaxies,elliptical galaxies,intermediate galaxies,spiral galaxies,and irregular galaxies.Following this classification,parameter computation was conducted on the targets.Experimental results show that the detection model has achieved better performance than previous studies,with a mean average precision of 85.20%at Intersection over Union values ranging from 0.5 to 0.95.Both classification models also reached an accuracy of over 85%on the test set.Compared with classical CNN networks,these two classification models boast higher precision,and the computation of target parameters has also yielded reliable outcomes.Experiments verify that this pipeline can act as a supplementary tool for astronomical image processing and be applied to data mining and analysis work in sky surveys.
基金funded by Deanship of Graduate Studies and Scientific Research at Najran University for supporting the research project through the Nama’a program,with the project code NU/GP/MRC/13/771-4.
文摘Breast cancer remains one of the most pressing global health concerns,and early detection plays a crucial role in improving survival rates.Integrating digital mammography with computational techniques and advanced image processing has significantly enhanced the ability to identify abnormalities.However,existing methodologies face persistent challenges,including low image contrast,noise interference,and inaccuracies in segmenting regions of interest.To address these limitations,this study introduces a novel computational framework for analyzing mammographic images,evaluated using the Mammographic Image Analysis Society(MIAS)dataset comprising 322 samples.The proposed methodology follows a structured three-stage approach.Initially,mammographic scans are classified using the Breast Imaging Reporting and Data System(BI-RADS),ensuring systematic and standardized image analysis.Next,the pectoral muscle,which can interfere with accurate segmentation,is effectively removed to refine the region of interest(ROI).The final stage involves an advanced image pre-processing module utilizing Independent Component Analysis(ICA)to enhance contrast,suppress noise,and improve image clarity.Following these enhancements,a robust segmentation technique is employed to delineated abnormal regions.Experimental results validate the efficiency of the proposed framework,demonstrating a significant improvement in the Effective Measure of Enhancement(EME)and a 3 dB increase in Peak Signal-to-Noise Ratio(PSNR),indicating superior image quality.The model also achieves an accuracy of approximately 97%,surpassing contemporary techniques evaluated on the MIAS dataset.Furthermore,its ability to process mammograms across all BI-RADS categories highlights its adaptability and reliability for clinical applications.This study presents an advanced and dependable computational framework for mammographic image analysis,effectively addressing critical challenges in noise reduction,contrast enhancement,and segmentation precision.The proposed approach lays the groundwork for seamless integration into computer-aided diagnostic(CAD)systems,with the potential to significantly enhance early breast cancer detection and contribute to improved patient outcomes.
文摘Based on the model of a formal neuron proposed by McCulloch and Pitts,a kind ofneural circuit,which is a CMOS Variable Threshold Logic(VTL)circuit,is given in this paperconsidering the features of the binary image processing system.The theoretical analysis,andthe simulations for the building block circuits such as D/A converters,comparator and so on aregiven.The layout design of the whole circuit are also given.The binary image processing can berealized by using the VTL circuit combined with its external auxiliary circuits.
基金financial support from the Brazilian Federal Agency for Support and Evaluation of Graduate Education(Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior—CAPES,scholarship process no BEX 0506/15-0)the Brazilian National Agency of Petroleum,Natural Gas and Biofuels(Agencia Nacional do Petroleo,Gas Natural e Biocombustiveis—ANP),in cooperation with the Brazilian Financier of Studies and Projects(Financiadora de Estudos e Projetos—FINEP)the Brazilian Ministry of Science,Technology and Innovation(Ministério da Ciencia,Tecnologia e Inovacao—MCTI)through the ANP’s Human Resources Program of the State University of Sao Paulo(Universidade Estadual Paulista—UNESP)for the Oil and Gas Sector PRH-ANP/MCTI no 48(PRH48).
文摘Important in many different sectors of the industry, the determination of stream velocity has become more and more important due to measurements precision necessity, in order to determine the right production rates, determine the volumetric production of undesired fluid, establish automated controls based on these measurements avoiding over-flooding or over-production, guaranteeing accurate predictive maintenance, etc. Difficulties being faced have been the determination of the velocity of specific fluids embedded in some others, for example, determining the gas bubbles stream velocity flowing throughout liquid fluid phase. Although different and already applicable methods have been researched and already implemented within the industry, a non-intrusive automated way of providing those stream velocities has its importance, and may have a huge impact in projects budget. Knowing the importance of its determination, this developed script uses a methodology of breaking-down real-time videos media into frame images, analyzing by pixel correlations possible superposition matches for further gas bubbles stream velocity estimation. In raw sense, the script bases itself in functions and procedures already available in MatLab, which can be used for image processing and treatments, allowing the methodology to be implemented. Its accuracy after the running test was of around 97% (ninety-seven percent);the raw source code with comments had almost 3000 (three thousand) characters;and the hardware placed for running the code was an Intel Core Duo 2.13 [Ghz] and 2 [Gb] RAM memory capable workstation. Even showing good results, it could be stated that just the end point correlations were actually getting to the final solution. So that, making use of self-learning functions or neural network, one could surely enhance the capability of the application to be run in real-time without getting exhaust by iterative loops.
文摘The scope of this project was to investigate the possibility of application of Image Processing Technique in the field of Shaft Alignment process. Misalignment of shaft using image processing software Visionbuilder was calculated. The further purpose of this project was to check whether the image processing technique can be used in bone transplant surgery. The model of the hip was used for the experimentation purpose. Image processing software Visionbuilder was used to match the profiles of the bone before implant and bone after implant.
