Relight of jet engines at high altitude is difficult due to the relatively low pressure and temperature of inlet air.The penetration of initial flame kernel affects the ignition probability in the turbine engine combu...Relight of jet engines at high altitude is difficult due to the relatively low pressure and temperature of inlet air.The penetration of initial flame kernel affects the ignition probability in the turbine engine combustor greatly.In order to achieve successful ignition at high altitude,a deeper penetration of initial flame kernel should be generated.In this study,a Gliding Arc Plasma Jet Igniter(GAPJI)is designed to induce initial flame kernel with deeper penetration to achieve successful ignition at high altitude.The ignition performance of the GAPJI was demonstrated in a model combustor.It was found that GAPJI can generate plasma with deeper penetration up to 30.5 mm than spark igniter with 22.1 mm.The discharge power of GAPJI was positively correlated with flow rate of the carrier gas,approaching 200 W in average.Ignition experiments show that GAPJI has the advantage of extending the lean ignition limit.With GAPJI,the lean ignition limit of the combustor is 0.02 at 0 km,which is 55.6%less than that with spark igniter(0.045).The evolution of flame morphology was observed to explore the development of the flame kernel.It is shown that the advantage of a high penetration and continuous releasing energy can accelerate the ignition process and enhance combustion.展开更多
In the extreme conditions of high altitude,low temperature,low pressure,and high speed,the aircraft engine is prone to flameout and difficult to start secondary ignition,which makes reliable ignition of combustion cha...In the extreme conditions of high altitude,low temperature,low pressure,and high speed,the aircraft engine is prone to flameout and difficult to start secondary ignition,which makes reliable ignition of combustion chamber at high altitude become a worldwide problem.To solve this problem,a kind of multichannel plasma igniter with round cavity is proposed in this paper,the three-channel and five-channel igniters are compared with the traditional ones.The discharge energy of the three igniters was compared based on the electric energy test and the thermal energy test,and ignition experiments was conducted in the simulated high-altitude environment of the component combustion chamber.The results show that the recessed multichannel plasma igniter has higher discharge energy than the conventional spark igniter,which can increase the conversion efficiency of electric energy from 26%to 43%,and the conversion efficiency of thermal energy from 25%to 73%.The recessed multichannel plasma igniter can achieve greater spark penetration depth and excitation area,which both increase with the increase of height.At the same height,the inlet flow helps to increase the penetration depth of the spark.The recessed multichannel plasma igniter can widen the lean ignition boundary,and the maximum enrichment percentage of lean ignition boundary can reach 31%.展开更多
Relighting of jet engines at high altitudes is very difficult because of the high velocity, low pressure, and low tempera- ture of the inlet airflow. Successful ignition needs sufficient ignition energy to generate a ...Relighting of jet engines at high altitudes is very difficult because of the high velocity, low pressure, and low tempera- ture of the inlet airflow. Successful ignition needs sufficient ignition energy to generate a spark kernel to induce a so-called critical flame initiation radius. However, at high altitudes with high-speed inlet airflow, the critical flame initiation radius becomes larger; therefore, traditional ignition technologies such as a semiconductor igniter （SI） become infeasible for use in high-altitude relighting of jet engines. In this study, to generate a large spark kernel to achieve successful ignition with high-speed inlet airflow, a new type of multichannel plasma igniter （MCPI） is proposed. Experiments on the electrical char- acteristics of the MCPI and SI were conducted under normal and sub-atmospheric pressures （P = 10-100 kPa）. Ignition experiments for the MCPI and SI with a kerosene/air mixture in a triple-swirler combustor under different velocities of inlet airflow （60-110 m/s）, with a temperature of 473 K at standard atmospheric pressure, were investigated. Results show that the MCPI generates much more arc discharge energy than the SI under a constant pressure; for example, the MCPI generated 6.93% and 16.05 % more arc discharge energy than that of the SI at 30 kPa and 50 kPa, respectively. Compared to the SI, the MCPI generates a larger area and height of plasma heating zone, and induces a much larger initial spark kernel. Furthermore, the lean ignition limit of the MCPI and SI decreases with an increase in the velocity of the inlet airflow, and the maximum velocity of inlet airflow where the SI and MCPI can achieve successful and reliable ignition is 88.7 m/s and 102.2 m/s, respectively. Therefore, the MCPI has the advantage of achieving successful ignition with high-speed inlet airflow and extends the average ignition speed boundary of the kerosene/air mixture by 15.2%.展开更多
High-temperature ignition is essential for the ignition and combustion of energetic metal fuels, including aluminum and magnesium particles which are protected by their high- melting-temperature oxides. A plasma torch...High-temperature ignition is essential for the ignition and combustion of energetic metal fuels, including aluminum and magnesium particles which are protected by their high- melting-temperature oxides. A plasma torch characterized by an ultrahigh-temperature plasma plume fulfills such high-temperature ignition conditions. A new steam plasma igniter is designed and successfully validated by aluminum power ignition and combustion tests. The steam plasma rapidly stabilizes in both plasma and steam jet modes. Parametric investigation of the steam plasma jet is conducted in terms of arc strength. A high-speed camera and an oscilloscope method visualize the discharge characteristics, and optical emission spectroscopy measures the thermochemical properties of the plasma jet. The diatomic molecule OH fitting method, the Boltzmann plot method, and short exposure capturing with an intensified charge coupled device record the axial distributions of the rotational gas temperature, excitation temperature, and OH radical distribution, respectively. The excitation temperature at the nozzle tip is near 5500 K, and the gas temperature is 5400 K.展开更多
Plasma ignition technology has delivered good performance in the aerospace industry. In this study, a pre-combustion plasma jet igniter was designed, and its characteristics were examined from three aspects: the morph...Plasma ignition technology has delivered good performance in the aerospace industry. In this study, a pre-combustion plasma jet igniter was designed, and its characteristics were examined from three aspects: the morphology, temperature, and discharge characteristics and process of ignition. Images of the OH distribution were obtained by using an OH Planar Laser-Induced Fluorescence(OH-PLIF) experimental system. Results have shown that the proposed plasma jet had a higher OH concentration, longer length, and larger area than those of a traditional igniter. The stability of discharge of the igniter was improved as the equivalence ratio φ was increased, and reducing gas flow reduced the pulsation of the plasma jet. When the input current was increased from 15A to 35 A, the highest average temperature increased from 5127 K to 7987 K. An increase in the equivalence ratio reduced the region of arc ionization, but expanded the regions of the core combustion reaction and the outer flame. Herein, this study has obtained a deep understanding of the jet and ignition law and developed a new idea for the application of plasma in the ignition field.A pre-combustion plasma jet igniter can significantly improve the efficiency of ignition and shorten the ignition process compared with a traditional igniter.展开更多
Block piezoelectric ceramics(PZTs)are often used in impact igniters to provide activation energy for electric initiators.Under the action of strong impact stress,PZTs release electric energy accompanied by crack initi...Block piezoelectric ceramics(PZTs)are often used in impact igniters to provide activation energy for electric initiators.Under the action of strong impact stress,PZTs release electric energy accompanied by crack initiation,propagation and crushing.At present,the electrical output performance of PZTs in projectile is usually calculated by quasi-static piezoelectric equation without considering the dynamic effect caused by strong impact and the influence of crack propagation on material properties.So the ignition parameters are always not accurately predicted.To tackle this,a PZT dynamic damage constitutive model considering crack propagation is established based on the dynamic impact test and the crack propagation theory of brittle materials.The model is then embedded into the ABAQUS subroutine and used to simulate the electromechanical response of the impact igniter during the impact of a small caliber projectile on the target.Meanwhile,the experiments of projectile with impact igniter impact on the target are carried out.The comparison between experimental and numerical simulation results show that the established dynamic damage model can effectively predict the dynamic electromechanical response of PZTs in the missile service environment.展开更多
The electrical characteristics of an alternating current （AC） plasma igniter were investigated for a working gas of air at atmospheric pressure. The discharge voltage and current were measured in air in both breakdo...The electrical characteristics of an alternating current （AC） plasma igniter were investigated for a working gas of air at atmospheric pressure. The discharge voltage and current were measured in air in both breakdown and stable combustion processes, respectively, and the current-zero phenomena, voltage-current （V-I） characteristics were studied for different working gas flow rates. The results indicated that the working gas between anode and cathode could be ionized to generate gas discharge when the voltage reached 8 kV, and the maximum current was 33.36 A. When the current came to zero, current-zero phenomena appeared with duration of 2 #s. At the current-zero moment, dynamic resistance between electrodes became extremely high, and the maximum value could reach 445 kf~, which was the main factor to restrain the current. With increasing working gas flow rates, the gradient of V-I characteristic curves was increased, as was the dynamic resistance. At a constant driven power, the discharge voltage increased.展开更多
At present, aero-engines face a major need to widen the ignition envelope. In order to provide a technical support to expand the high altitude ignition envelope of aero-engines, in this article we propose a novel igni...At present, aero-engines face a major need to widen the ignition envelope. In order to provide a technical support to expand the high altitude ignition envelope of aero-engines, in this article we propose a novel ignition technology, i.e., "precombustion plasma jet ignition technology". In this paper, we also design a pre-combustion plasma jet igniter. Its discharge characteristics, jet characteristics, and ignition effects are studied. The results show that increasing the equivalent ratio of jet gas can enhance the discharge stability and increase the duty cycle. At the same time, it can reduce working power and energy consumption. The increase of equivalent ratio in jet gas can enhance the length and ignition area of plasma jet.In the process of ignition, the pre-combustion plasma jet igniter has obvious advantages, suchn as shortening the ignition delay time and enlarging the ignition boundary. When the airflow velocity is 39.11 m/s and the inlet air temperature is80℃, compared with the spark igniter and the air plasma jet igniter, the pre-combustion plasma jet igniter has an ignition boundary that is expanded by 319.8% and 55.7% respectively.展开更多
Stable combustion in an afterburner can help increase the thrust of the engine in a short time,thereby improving the maneuverability of a fighter.To improve the ignition performance of an afterburner,a twin-duct ignit...Stable combustion in an afterburner can help increase the thrust of the engine in a short time,thereby improving the maneuverability of a fighter.To improve the ignition performance of an afterburner,a twin-duct ignition platform was designed to study the performance of a gliding arc plasma igniter in close-to-real afterburner conditions.The research was carried out by a combination of experiments and simulations.The working environment of the igniter was explored through a numerical simulation.The results showed that the airflow ejected from the radiating holes formed a swirling sheath,which increased the anti-interference ability of the airflow jet.The influence of the pressure difference between the inlet and outlet of the igniter(Δp),the flow rate outside the igniter outlet(W_(2)),and the installation angle(α)on the singlecycle discharge energy(E)as well as the maximum arc length(L)were studied through experiments.Three stages were identified:the airflow breakdown stage,the arc evolution stage,and the arc fracture stage.E and L increased by 107.3%and 366.2%,respectively,withΔp increasing from 10 to 70 Torr.The relationship between L andΔp obtained by data fitting is L=3-2.47/(1+(Δp/25)^(4)).The relationship of L at differentαis L_(α=0°)>(L_(α=45°)and L_(α=135°))>L_(α=180°)>L_(α=90°).E and L decrease by 18.2%and 37.3%,respectively,whenΔp=45 Torr and W_(2) is increased from 0 to 250 l min^(-1).展开更多
A plasma jet ignition technology was studied for aeroengine combustor.The advantages of compact stnucture and advanced performance of air-cooled plasma jet igniter had been tested and verified in the opening test.The ...A plasma jet ignition technology was studied for aeroengine combustor.The advantages of compact stnucture and advanced performance of air-cooled plasma jet igniter had been tested and verified in the opening test.The plasma jet igniter could produce a continuous plasma jet,stable and reliable ignition.The influence factors of plasma jet ignition aerodynamic and structure were studied in the opening test.Continuous plasma jet was closely related to inlet pressure and flow,simultaneously to the igniter nozzle geometry and throat size.Based on the stable continuous plasma jet,some methods were explored in order to reduce plasma output power,optimize the structure design,and improve the thermal protective.The plasma jet igniter applied to aeroengine combustor was identified initially.For combustion chamber with the igniter,altitude ignition performance were experimented for the inlet pressure of plasma ignition from 10 kPa to 50 kPa,the flow of plasma jet not more than 0.20 g/s,and energy output of ignition from 800 W to 1500 W.The test results were compared with that of conventional aeroengine high energy ignition system.The results show that the plasma jet igniter is better than the conventional one.展开更多
Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade...Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.展开更多
Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric ...Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1??to 123.5??.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.展开更多
Boron has attracted increasing attention in the field of high-energy explosives and propellants due to its high volume calorific value and mass calorific value.However,the complicated combustion process and low combus...Boron has attracted increasing attention in the field of high-energy explosives and propellants due to its high volume calorific value and mass calorific value.However,the complicated combustion process and low combustion efficiency hinder its wide application.To tackle this challenge,bioinspired polydopamine(PDA)interface reinforced boron-Viton composites,with high structure stability and excellent energy releasing efficiency,are designed and prepared,combining the interface regulation of PDA biomimetic materials and combustion promotion of fluoropolymers.Firstly,the stronger adsorption energy of PDA with boron compared to Viton is demonstrated by molecular dynamics simulations.Next,B@PDA@Viton is prepared by the combination of in-situ dopamine polymerization and solvent/nonsolvent method,and the double-layer core-shell structure is confirmed by XPS,FTIR,and TEM characterizations.TG-DSC analysis shows that B@PDA@Viton possesses superior thermal properties,with a 55.48%increase in oxidation heat compared to raw B.Furthermore,ignition and combustion performance tests indicate that B@PDA@Viton reduces ignition delay by 57.56%and increases heat of combustion by 68.63%relative to raw B.These findings elucidate the ignition and combustion mechanisms of B@PDA@Viton.This work not only developed high-performance boron-based composite fuels but also provided insights into the development of boron-based fuels.展开更多
Pre-chamber ignition technology can address the issue of uneven in-cylinder mixture combustion in large-bore marine engines.The impact of various pre-chamber structures on the formation of the mixture and jet flames w...Pre-chamber ignition technology can address the issue of uneven in-cylinder mixture combustion in large-bore marine engines.The impact of various pre-chamber structures on the formation of the mixture and jet flames within the pre-chamber is explored.This study performed numerical simulations on a large-bore marine ammonia/hydrogen pre-chamber engine prototype,considering pre-chamber volume,throat diameter,the distance between the hydrogen injector and the spark plug,and the hydrogen injector angle.Compared with the original engine,when the pre-chamber volume is 73.4 ml,the throat diameter is 14 mm,the distance ratio is 0.92,and the hydrogen injector angle is 80°.Moreover,the peak pressure in the pre-chamber increased by 23.1%,and that in the main chamber increased by 46.3%.The results indicate that the performance of the original engine is greatly enhanced by altering its fuel and pre-chamber structure.展开更多
Magnesium and its alloys offer lightweight advantage and have extensive development prospects,particularly in aerospace.However,their flammability poses a significant barrier on the development of Mg alloys.The igniti...Magnesium and its alloys offer lightweight advantage and have extensive development prospects,particularly in aerospace.However,their flammability poses a significant barrier on the development of Mg alloys.The ignition resistance of these alloys often depends on the protectiveness of the oxide film formed on the surface.This paper elucidates the formation mechanism of oxide film from thermodynamics and kinetics,classifying oxide films based on their layered structure to assess their protective properties.Furthermore,it comprehensively reviews the impact of characteristics on the protective effectiveness such as compactness,continuity,thickness,and mechanical properties.The paper also introduces various characterization methods for the microstructure and properties of oxide film.The primary objective of this paper is to enhance the comprehension of oxide film concerning the ignition resistance of Mg alloys and to furnish references for future advancements and research in Mg alloys with heightened ignition resistance.展开更多
Enhancing the ignition system performance of turbo engines is crucial,with a focus on rapidly and reliably igniting the entire combustor in low-temperature,low-pressure,high-speed inlet flow conditions.This challenge ...Enhancing the ignition system performance of turbo engines is crucial,with a focus on rapidly and reliably igniting the entire combustor in low-temperature,low-pressure,high-speed inlet flow conditions.This challenge has garnered international attention.To address the issue of reliable ignition in the combustors of advanced propulsion system,this paper proposes a Multichannel Jet Enhanced Plasma Igniter(MJEPI) and conducts comparative experimental studies with the conventional spark igniter in a component-level dual-dome swirl combustor.The ignition limit in the combustor is obtained and the ignition processes are recorded.Experimental results demonstrate that the MJEPI significantly improves the ignition performance at high altitude.Specifically,at 0 km and 6 km for ground start-up,ignition limit is extended by 36% and 29%,respectively.At 6 km and 12 km for high-altitude relight,ignition limit is extended by 32% and 21%,respectively.The maximum ignition height is increased by 2.3 km,as determined by the global equivalence ratio of 1.The primary reason for these improvements is attributed to the larger initial flame kernel with greater penetration depth generated by MJEPI,which enables it to withstand more sever conditions such as low temperature,low pressure,and poor kerosene spray quality at elevated altitudes.展开更多
In February 2024,192 lasers at the National Ignition Facility(NIF)in Livermore,CA,USA,began pouring 2.2 MJ of energy into a gold container smaller than the tip of a person’s little finger,heat-ing it to more than thr...In February 2024,192 lasers at the National Ignition Facility(NIF)in Livermore,CA,USA,began pouring 2.2 MJ of energy into a gold container smaller than the tip of a person’s little finger,heat-ing it to more than three million degrees Celsius(Fig.1)[1-4].Inside the container was a tiny fuel capsule containing tritium and deuterium that imploded at more than 400 km·s^(-1)causing atoms to combine and releasing 5.2 MJ of energy[1-4].展开更多
The reignition of aero-engine combustors at high altitudes poses significant challenges due to the low-temperature and low-pressure environment.A novel Long Pulse-Width Plasma Ignition(LPWPI)system has been developed ...The reignition of aero-engine combustors at high altitudes poses significant challenges due to the low-temperature and low-pressure environment.A novel Long Pulse-Width Plasma Ignition(LPWPI)system has been developed to enhance ignition performance.The LPWPI system can effectively prolong the discharge duration time,improve ignition efficacy,and increase the plasma penetration depth.Experimental comparisons with the traditional Spark Ignition(SI)system demonstrate that the LPWPI increased discharge duration to 2.03 ms,which is 45 times longer than that of the SI system,while also doubling the spark penetration depth to 24.1 mm.The LPWPI system achieved a discharge efficiency of 61.1%,significantly surpassing the SI system's efficiency of23.3%.These advancements facilitated an extension of the lean ignition boundary by approximately 22.7%to 39.3%.High-speed camera recordings reveal that the spark duration of the LPWPI system was extended to 2.1 ms,compared to 0.6 ms in the SI system.Ignition progress with LPWPI shows a sustained spark kernel without the flame residence stage observed in the SI system.The impressive performance of the LPWPI system suggests that it is a promising alternative for aero-engine ignition systems.展开更多
Oxide films hinder diffusion and resist external forces,which determines the flame ignition mechanism of magnesium alloys.The effects of the continuity,compactness and mechanical properties of oxide films on the ignit...Oxide films hinder diffusion and resist external forces,which determines the flame ignition mechanism of magnesium alloys.The effects of the continuity,compactness and mechanical properties of oxide films on the ignition mechanism were analyzed,by investigating the flame ignition behaviors of AZ80(ZM5),EZ30K(ZM6)and WE43 Mg alloys.The results show that the rupture of the oxide films caused by liquid gravity was the key to causing ignition.According to thermodynamic calculations,compared with Mg,Al cannot be preferentially oxidized;while Nd can be preferentially oxidized through significant enrichment,resulting in a discontinuous Nd_(2)O_(3)inner layer in the ZM6 alloy;in contrast,Y has a strong preferential oxidation ability,which gives the WE43 alloy a continuous Y_(2)O_(3)inner layer and self-healing ability.In addition,the oxide film of the ZM5 alloy is loose and has poor mechanical properties,so it cannot effec-tively hinder diffusion and resist liquid gravity.Differently,the oxide films of the ZM6 and WE43 alloys are dense and have better mechanical properties,leading to higher ignition temperatures and longer igni-tion times.In addition,a criterion was proposed to predict the ignition time based on the law of energy conservation,and it was simplified to predict the ignition temperature.The errors between the predicted and measured values are within 11%.展开更多
Aluminum-water(Al-H_(2)O)propellants represent an innovative class of solid propellants characterized by low cost and minimal signal signature.However,conventional formulations are hindered by significant aluminum(Al)...Aluminum-water(Al-H_(2)O)propellants represent an innovative class of solid propellants characterized by low cost and minimal signal signature.However,conventional formulations are hindered by significant aluminum(Al)agglomeration,leading to reduced combustion efficiency and substantial residues.This study introduces a method for modifying Al powder with Polyvinylidene Fluoride(PVDF)to enhance the performance of Al-H_(2)O propellants by mitigating agglomeration during combustion.Experimental methodologies,including thermogravimetric analysis under ambient-pressure nitrogen atmosphere and laser ignition tests,were employed to investigate the influence of varying PVDF content on the combustion characteristics of the propellants.Furthermore,the effect of PVDF on motor performance was systematically evaluated through laboratoryscale Solid Rocket Motor(SRM)tests.The results demonstrate that the addition of 7.5%PVDF significantly enhances the burning rate from 1.12 mm/s to 3.78 mm/s and reduces the mean particle size of condensed combustion products from 699μm to 527μm.Combustion efficiency rises from88.57%to 94.51%,while injection efficiency improves significantly from 30.45%to 70.45%.SRM tests further demonstrate an increase in combustion chamber pressure from 0.17 MPa to 0.58 MPa.A dynamic agglomeration model explains these improvements,attributing reduced agglomeration to enhanced aerodynamic forces and a thinner melting layer,while increased gas yield improves injection performance.This study highlights PVDF's potential in advancing Al-H_(2)O propellants by improving combustion and injection efficiency.展开更多
基金co-supported by the National Natural Science Foundation of China (Nos. 51807204 and 91941301)the Postdoctoral Research Foundation of China (No. 2019M663719)the National Science and Technology Major Project, China (No. 2017-Ⅲ-0007-0033)
文摘Relight of jet engines at high altitude is difficult due to the relatively low pressure and temperature of inlet air.The penetration of initial flame kernel affects the ignition probability in the turbine engine combustor greatly.In order to achieve successful ignition at high altitude,a deeper penetration of initial flame kernel should be generated.In this study,a Gliding Arc Plasma Jet Igniter(GAPJI)is designed to induce initial flame kernel with deeper penetration to achieve successful ignition at high altitude.The ignition performance of the GAPJI was demonstrated in a model combustor.It was found that GAPJI can generate plasma with deeper penetration up to 30.5 mm than spark igniter with 22.1 mm.The discharge power of GAPJI was positively correlated with flow rate of the carrier gas,approaching 200 W in average.Ignition experiments show that GAPJI has the advantage of extending the lean ignition limit.With GAPJI,the lean ignition limit of the combustor is 0.02 at 0 km,which is 55.6%less than that with spark igniter(0.045).The evolution of flame morphology was observed to explore the development of the flame kernel.It is shown that the advantage of a high penetration and continuous releasing energy can accelerate the ignition process and enhance combustion.
基金National Natural Science Foundation of China(Grant No.91641204).
文摘In the extreme conditions of high altitude,low temperature,low pressure,and high speed,the aircraft engine is prone to flameout and difficult to start secondary ignition,which makes reliable ignition of combustion chamber at high altitude become a worldwide problem.To solve this problem,a kind of multichannel plasma igniter with round cavity is proposed in this paper,the three-channel and five-channel igniters are compared with the traditional ones.The discharge energy of the three igniters was compared based on the electric energy test and the thermal energy test,and ignition experiments was conducted in the simulated high-altitude environment of the component combustion chamber.The results show that the recessed multichannel plasma igniter has higher discharge energy than the conventional spark igniter,which can increase the conversion efficiency of electric energy from 26%to 43%,and the conversion efficiency of thermal energy from 25%to 73%.The recessed multichannel plasma igniter can achieve greater spark penetration depth and excitation area,which both increase with the increase of height.At the same height,the inlet flow helps to increase the penetration depth of the spark.The recessed multichannel plasma igniter can widen the lean ignition boundary,and the maximum enrichment percentage of lean ignition boundary can reach 31%.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.91541120,11472306,51336011,and 91641204)
文摘Relighting of jet engines at high altitudes is very difficult because of the high velocity, low pressure, and low tempera- ture of the inlet airflow. Successful ignition needs sufficient ignition energy to generate a spark kernel to induce a so-called critical flame initiation radius. However, at high altitudes with high-speed inlet airflow, the critical flame initiation radius becomes larger; therefore, traditional ignition technologies such as a semiconductor igniter （SI） become infeasible for use in high-altitude relighting of jet engines. In this study, to generate a large spark kernel to achieve successful ignition with high-speed inlet airflow, a new type of multichannel plasma igniter （MCPI） is proposed. Experiments on the electrical char- acteristics of the MCPI and SI were conducted under normal and sub-atmospheric pressures （P = 10-100 kPa）. Ignition experiments for the MCPI and SI with a kerosene/air mixture in a triple-swirler combustor under different velocities of inlet airflow （60-110 m/s）, with a temperature of 473 K at standard atmospheric pressure, were investigated. Results show that the MCPI generates much more arc discharge energy than the SI under a constant pressure; for example, the MCPI generated 6.93% and 16.05 % more arc discharge energy than that of the SI at 30 kPa and 50 kPa, respectively. Compared to the SI, the MCPI generates a larger area and height of plasma heating zone, and induces a much larger initial spark kernel. Furthermore, the lean ignition limit of the MCPI and SI decreases with an increase in the velocity of the inlet airflow, and the maximum velocity of inlet airflow where the SI and MCPI can achieve successful and reliable ignition is 88.7 m/s and 102.2 m/s, respectively. Therefore, the MCPI has the advantage of achieving successful ignition with high-speed inlet airflow and extends the average ignition speed boundary of the kerosene/air mixture by 15.2%.
基金supported by the Defense Acquisition Program Administration and Agency for Defense Development under the contract UD110095CDsupported by the Advanced Research Center Program(NRF-2013R1A5A1073861) through the National Research Foundation of Korea(NRF) grant funded by the Korean government(MSIP) contracted through the Advanced Space Propulsion Research Center at Seoul National University
文摘High-temperature ignition is essential for the ignition and combustion of energetic metal fuels, including aluminum and magnesium particles which are protected by their high- melting-temperature oxides. A plasma torch characterized by an ultrahigh-temperature plasma plume fulfills such high-temperature ignition conditions. A new steam plasma igniter is designed and successfully validated by aluminum power ignition and combustion tests. The steam plasma rapidly stabilizes in both plasma and steam jet modes. Parametric investigation of the steam plasma jet is conducted in terms of arc strength. A high-speed camera and an oscilloscope method visualize the discharge characteristics, and optical emission spectroscopy measures the thermochemical properties of the plasma jet. The diatomic molecule OH fitting method, the Boltzmann plot method, and short exposure capturing with an intensified charge coupled device record the axial distributions of the rotational gas temperature, excitation temperature, and OH radical distribution, respectively. The excitation temperature at the nozzle tip is near 5500 K, and the gas temperature is 5400 K.
基金co-supported by the National Natural Science Foundation of China(No.52306123)the Postdoctoral Science Foundation,China(No.2023M734277)the Natural Science Basic Research Program of Shaanxi,China(No.2021JQ-046)。
文摘Plasma ignition technology has delivered good performance in the aerospace industry. In this study, a pre-combustion plasma jet igniter was designed, and its characteristics were examined from three aspects: the morphology, temperature, and discharge characteristics and process of ignition. Images of the OH distribution were obtained by using an OH Planar Laser-Induced Fluorescence(OH-PLIF) experimental system. Results have shown that the proposed plasma jet had a higher OH concentration, longer length, and larger area than those of a traditional igniter. The stability of discharge of the igniter was improved as the equivalence ratio φ was increased, and reducing gas flow reduced the pulsation of the plasma jet. When the input current was increased from 15A to 35 A, the highest average temperature increased from 5127 K to 7987 K. An increase in the equivalence ratio reduced the region of arc ionization, but expanded the regions of the core combustion reaction and the outer flame. Herein, this study has obtained a deep understanding of the jet and ignition law and developed a new idea for the application of plasma in the ignition field.A pre-combustion plasma jet igniter can significantly improve the efficiency of ignition and shorten the ignition process compared with a traditional igniter.
基金supported by the National Natural Science Foundation of China(Grant No.12172232)the project of Key Laboratory of Impact and Safety Engineering(Ningbo University,China)+1 种基金Ministry of Education(CJ202206)supported by the scientific research support plan of introducing high-level talents from Shenyang Ligong University。
文摘Block piezoelectric ceramics(PZTs)are often used in impact igniters to provide activation energy for electric initiators.Under the action of strong impact stress,PZTs release electric energy accompanied by crack initiation,propagation and crushing.At present,the electrical output performance of PZTs in projectile is usually calculated by quasi-static piezoelectric equation without considering the dynamic effect caused by strong impact and the influence of crack propagation on material properties.So the ignition parameters are always not accurately predicted.To tackle this,a PZT dynamic damage constitutive model considering crack propagation is established based on the dynamic impact test and the crack propagation theory of brittle materials.The model is then embedded into the ABAQUS subroutine and used to simulate the electromechanical response of the impact igniter during the impact of a small caliber projectile on the target.Meanwhile,the experiments of projectile with impact igniter impact on the target are carried out.The comparison between experimental and numerical simulation results show that the established dynamic damage model can effectively predict the dynamic electromechanical response of PZTs in the missile service environment.
基金supported by National Natural Science Foundation of China(Nos.50776100,51106179)
文摘The electrical characteristics of an alternating current （AC） plasma igniter were investigated for a working gas of air at atmospheric pressure. The discharge voltage and current were measured in air in both breakdown and stable combustion processes, respectively, and the current-zero phenomena, voltage-current （V-I） characteristics were studied for different working gas flow rates. The results indicated that the working gas between anode and cathode could be ionized to generate gas discharge when the voltage reached 8 kV, and the maximum current was 33.36 A. When the current came to zero, current-zero phenomena appeared with duration of 2 #s. At the current-zero moment, dynamic resistance between electrodes became extremely high, and the maximum value could reach 445 kf~, which was the main factor to restrain the current. With increasing working gas flow rates, the gradient of V-I characteristic curves was increased, as was the dynamic resistance. At a constant driven power, the discharge voltage increased.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51776223 and 91741112)
文摘At present, aero-engines face a major need to widen the ignition envelope. In order to provide a technical support to expand the high altitude ignition envelope of aero-engines, in this article we propose a novel ignition technology, i.e., "precombustion plasma jet ignition technology". In this paper, we also design a pre-combustion plasma jet igniter. Its discharge characteristics, jet characteristics, and ignition effects are studied. The results show that increasing the equivalent ratio of jet gas can enhance the discharge stability and increase the duty cycle. At the same time, it can reduce working power and energy consumption. The increase of equivalent ratio in jet gas can enhance the length and ignition area of plasma jet.In the process of ignition, the pre-combustion plasma jet igniter has obvious advantages, suchn as shortening the ignition delay time and enlarging the ignition boundary. When the airflow velocity is 39.11 m/s and the inlet air temperature is80℃, compared with the spark igniter and the air plasma jet igniter, the pre-combustion plasma jet igniter has an ignition boundary that is expanded by 319.8% and 55.7% respectively.
基金supported by National Science and Technology Major Project (No. 2017-Ⅲ-0007-0033)
文摘Stable combustion in an afterburner can help increase the thrust of the engine in a short time,thereby improving the maneuverability of a fighter.To improve the ignition performance of an afterburner,a twin-duct ignition platform was designed to study the performance of a gliding arc plasma igniter in close-to-real afterburner conditions.The research was carried out by a combination of experiments and simulations.The working environment of the igniter was explored through a numerical simulation.The results showed that the airflow ejected from the radiating holes formed a swirling sheath,which increased the anti-interference ability of the airflow jet.The influence of the pressure difference between the inlet and outlet of the igniter(Δp),the flow rate outside the igniter outlet(W_(2)),and the installation angle(α)on the singlecycle discharge energy(E)as well as the maximum arc length(L)were studied through experiments.Three stages were identified:the airflow breakdown stage,the arc evolution stage,and the arc fracture stage.E and L increased by 107.3%and 366.2%,respectively,withΔp increasing from 10 to 70 Torr.The relationship between L andΔp obtained by data fitting is L=3-2.47/(1+(Δp/25)^(4)).The relationship of L at differentαis L_(α=0°)>(L_(α=45°)and L_(α=135°))>L_(α=180°)>L_(α=90°).E and L decrease by 18.2%and 37.3%,respectively,whenΔp=45 Torr and W_(2) is increased from 0 to 250 l min^(-1).
基金The study is all supported by Aviation Science Foundation of Aviation Industry Corporation of Chinathe authors are grateful to the participants of Shenyang Engine Research Institute of China for their help.
文摘A plasma jet ignition technology was studied for aeroengine combustor.The advantages of compact stnucture and advanced performance of air-cooled plasma jet igniter had been tested and verified in the opening test.The plasma jet igniter could produce a continuous plasma jet,stable and reliable ignition.The influence factors of plasma jet ignition aerodynamic and structure were studied in the opening test.Continuous plasma jet was closely related to inlet pressure and flow,simultaneously to the igniter nozzle geometry and throat size.Based on the stable continuous plasma jet,some methods were explored in order to reduce plasma output power,optimize the structure design,and improve the thermal protective.The plasma jet igniter applied to aeroengine combustor was identified initially.For combustion chamber with the igniter,altitude ignition performance were experimented for the inlet pressure of plasma ignition from 10 kPa to 50 kPa,the flow of plasma jet not more than 0.20 g/s,and energy output of ignition from 800 W to 1500 W.The test results were compared with that of conventional aeroengine high energy ignition system.The results show that the plasma jet igniter is better than the conventional one.
文摘Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.
基金supported by Research Fund of SWUST for PhD(Grant No.22zx7175)Sichuan Science and Technology Program(Grant No.2024NSFSC1097)。
文摘Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1??to 123.5??.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.
基金funded by the National Natural Science Foundation of China,Grant No.22405208。
文摘Boron has attracted increasing attention in the field of high-energy explosives and propellants due to its high volume calorific value and mass calorific value.However,the complicated combustion process and low combustion efficiency hinder its wide application.To tackle this challenge,bioinspired polydopamine(PDA)interface reinforced boron-Viton composites,with high structure stability and excellent energy releasing efficiency,are designed and prepared,combining the interface regulation of PDA biomimetic materials and combustion promotion of fluoropolymers.Firstly,the stronger adsorption energy of PDA with boron compared to Viton is demonstrated by molecular dynamics simulations.Next,B@PDA@Viton is prepared by the combination of in-situ dopamine polymerization and solvent/nonsolvent method,and the double-layer core-shell structure is confirmed by XPS,FTIR,and TEM characterizations.TG-DSC analysis shows that B@PDA@Viton possesses superior thermal properties,with a 55.48%increase in oxidation heat compared to raw B.Furthermore,ignition and combustion performance tests indicate that B@PDA@Viton reduces ignition delay by 57.56%and increases heat of combustion by 68.63%relative to raw B.These findings elucidate the ignition and combustion mechanisms of B@PDA@Viton.This work not only developed high-performance boron-based composite fuels but also provided insights into the development of boron-based fuels.
基金Supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions under Grant No.014000319/2018-00391.
文摘Pre-chamber ignition technology can address the issue of uneven in-cylinder mixture combustion in large-bore marine engines.The impact of various pre-chamber structures on the formation of the mixture and jet flames within the pre-chamber is explored.This study performed numerical simulations on a large-bore marine ammonia/hydrogen pre-chamber engine prototype,considering pre-chamber volume,throat diameter,the distance between the hydrogen injector and the spark plug,and the hydrogen injector angle.Compared with the original engine,when the pre-chamber volume is 73.4 ml,the throat diameter is 14 mm,the distance ratio is 0.92,and the hydrogen injector angle is 80°.Moreover,the peak pressure in the pre-chamber increased by 23.1%,and that in the main chamber increased by 46.3%.The results indicate that the performance of the original engine is greatly enhanced by altering its fuel and pre-chamber structure.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB3501002)the National Natural Science Foundation of China(Grant No.52301059,No.52271009)the Shanghai Post-doctoral Excellence Program(Grant No.2023372).
文摘Magnesium and its alloys offer lightweight advantage and have extensive development prospects,particularly in aerospace.However,their flammability poses a significant barrier on the development of Mg alloys.The ignition resistance of these alloys often depends on the protectiveness of the oxide film formed on the surface.This paper elucidates the formation mechanism of oxide film from thermodynamics and kinetics,classifying oxide films based on their layered structure to assess their protective properties.Furthermore,it comprehensively reviews the impact of characteristics on the protective effectiveness such as compactness,continuity,thickness,and mechanical properties.The paper also introduces various characterization methods for the microstructure and properties of oxide film.The primary objective of this paper is to enhance the comprehension of oxide film concerning the ignition resistance of Mg alloys and to furnish references for future advancements and research in Mg alloys with heightened ignition resistance.
基金supported by the Science Center for Gas Turbine Project, China (No. P2022-B-Ⅱ-018-001)。
文摘Enhancing the ignition system performance of turbo engines is crucial,with a focus on rapidly and reliably igniting the entire combustor in low-temperature,low-pressure,high-speed inlet flow conditions.This challenge has garnered international attention.To address the issue of reliable ignition in the combustors of advanced propulsion system,this paper proposes a Multichannel Jet Enhanced Plasma Igniter(MJEPI) and conducts comparative experimental studies with the conventional spark igniter in a component-level dual-dome swirl combustor.The ignition limit in the combustor is obtained and the ignition processes are recorded.Experimental results demonstrate that the MJEPI significantly improves the ignition performance at high altitude.Specifically,at 0 km and 6 km for ground start-up,ignition limit is extended by 36% and 29%,respectively.At 6 km and 12 km for high-altitude relight,ignition limit is extended by 32% and 21%,respectively.The maximum ignition height is increased by 2.3 km,as determined by the global equivalence ratio of 1.The primary reason for these improvements is attributed to the larger initial flame kernel with greater penetration depth generated by MJEPI,which enables it to withstand more sever conditions such as low temperature,low pressure,and poor kerosene spray quality at elevated altitudes.
文摘In February 2024,192 lasers at the National Ignition Facility(NIF)in Livermore,CA,USA,began pouring 2.2 MJ of energy into a gold container smaller than the tip of a person’s little finger,heat-ing it to more than three million degrees Celsius(Fig.1)[1-4].Inside the container was a tiny fuel capsule containing tritium and deuterium that imploded at more than 400 km·s^(-1)causing atoms to combine and releasing 5.2 MJ of energy[1-4].
基金co-supported by the National Natural Science Foundation of China(Nos.52376138 and 52025064)the Science Center for Gas Turbine Project,China(No.P2022B-Ⅱ-018-001)the Foundation Research Project,China(No.1002TJA22010)。
文摘The reignition of aero-engine combustors at high altitudes poses significant challenges due to the low-temperature and low-pressure environment.A novel Long Pulse-Width Plasma Ignition(LPWPI)system has been developed to enhance ignition performance.The LPWPI system can effectively prolong the discharge duration time,improve ignition efficacy,and increase the plasma penetration depth.Experimental comparisons with the traditional Spark Ignition(SI)system demonstrate that the LPWPI increased discharge duration to 2.03 ms,which is 45 times longer than that of the SI system,while also doubling the spark penetration depth to 24.1 mm.The LPWPI system achieved a discharge efficiency of 61.1%,significantly surpassing the SI system's efficiency of23.3%.These advancements facilitated an extension of the lean ignition boundary by approximately 22.7%to 39.3%.High-speed camera recordings reveal that the spark duration of the LPWPI system was extended to 2.1 ms,compared to 0.6 ms in the SI system.Ignition progress with LPWPI shows a sustained spark kernel without the flame residence stage observed in the SI system.The impressive performance of the LPWPI system suggests that it is a promising alternative for aero-engine ignition systems.
基金supported by the National Key Research and Development Program of China(No.2021YFB3501002)the National Science and Technology Major Project(No.J2019-Ⅷ-0003-0165)the National Natural Science Foundation of China(No.52301059).
文摘Oxide films hinder diffusion and resist external forces,which determines the flame ignition mechanism of magnesium alloys.The effects of the continuity,compactness and mechanical properties of oxide films on the ignition mechanism were analyzed,by investigating the flame ignition behaviors of AZ80(ZM5),EZ30K(ZM6)and WE43 Mg alloys.The results show that the rupture of the oxide films caused by liquid gravity was the key to causing ignition.According to thermodynamic calculations,compared with Mg,Al cannot be preferentially oxidized;while Nd can be preferentially oxidized through significant enrichment,resulting in a discontinuous Nd_(2)O_(3)inner layer in the ZM6 alloy;in contrast,Y has a strong preferential oxidation ability,which gives the WE43 alloy a continuous Y_(2)O_(3)inner layer and self-healing ability.In addition,the oxide film of the ZM5 alloy is loose and has poor mechanical properties,so it cannot effec-tively hinder diffusion and resist liquid gravity.Differently,the oxide films of the ZM6 and WE43 alloys are dense and have better mechanical properties,leading to higher ignition temperatures and longer igni-tion times.In addition,a criterion was proposed to predict the ignition time based on the law of energy conservation,and it was simplified to predict the ignition temperature.The errors between the predicted and measured values are within 11%.
基金supported by the National Natural Science Foundation of China(Nos.U2441284 and 22375164)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University,China(No.CX2024042)。
文摘Aluminum-water(Al-H_(2)O)propellants represent an innovative class of solid propellants characterized by low cost and minimal signal signature.However,conventional formulations are hindered by significant aluminum(Al)agglomeration,leading to reduced combustion efficiency and substantial residues.This study introduces a method for modifying Al powder with Polyvinylidene Fluoride(PVDF)to enhance the performance of Al-H_(2)O propellants by mitigating agglomeration during combustion.Experimental methodologies,including thermogravimetric analysis under ambient-pressure nitrogen atmosphere and laser ignition tests,were employed to investigate the influence of varying PVDF content on the combustion characteristics of the propellants.Furthermore,the effect of PVDF on motor performance was systematically evaluated through laboratoryscale Solid Rocket Motor(SRM)tests.The results demonstrate that the addition of 7.5%PVDF significantly enhances the burning rate from 1.12 mm/s to 3.78 mm/s and reduces the mean particle size of condensed combustion products from 699μm to 527μm.Combustion efficiency rises from88.57%to 94.51%,while injection efficiency improves significantly from 30.45%to 70.45%.SRM tests further demonstrate an increase in combustion chamber pressure from 0.17 MPa to 0.58 MPa.A dynamic agglomeration model explains these improvements,attributing reduced agglomeration to enhanced aerodynamic forces and a thinner melting layer,while increased gas yield improves injection performance.This study highlights PVDF's potential in advancing Al-H_(2)O propellants by improving combustion and injection efficiency.
