Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.Howev...Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.However,the widened hydraulic excitation frequency may satisfy the blade resonance due to the time variation in the velocity and angle of attack of the ocean current,even resulting in blade fatigue and destructively interfering with grid stability.A key parameter that determines the resonance amplitude of the blade is the hydrodynamic damping ratio(HDR).However,HDR is difficult to obtain due to the complex fluid-structure interaction(FSI).Therefore,a literature review was conducted on the hydrodynamic damping characteristics of blade-like structures.The experimental and simulation methods used to identify and obtain the HDR quantitatively were described,placing emphasis on the experimental processes and simulation setups.Moreover,the accuracy and efficiency of different simulation methods were compared,and the modal work approach was recommended.The effects of key typical parameters,including flow velocity,angle of attack,gap,rotational speed,and cavitation,on the HDR were then summarized,and the suggestions on operating conditions were presented from the perspective of increasing the HDR.Subsequently,considering multiple flow parameters,several theoretical derivations and semi-empirical prediction formulas for HDR were introduced,and the accuracy and application were discussed.Based on the shortcomings of the existing research,the direction of future research was finally determined.The current work offers a clear understanding of the HDR of blade-like structures,which could improve the evaluation accuracy of flow-induced vibration in the design stage.展开更多
The identification of key nodes plays an important role in improving the robustness of the transportation network.For different types of transportation networks,the effect of the same identification method may be diff...The identification of key nodes plays an important role in improving the robustness of the transportation network.For different types of transportation networks,the effect of the same identification method may be different.It is of practical significance to study the key nodes identification methods corresponding to various types of transportation networks.Based on the knowledge of complex networks,the metro networks and the bus networks are selected as the objects,and the key nodes are identified by the node degree identification method,the neighbor node degree identification method,the weighted k-shell degree neighborhood identification method(KSD),the degree k-shell identification method(DKS),and the degree k-shell neighborhood identification method(DKSN).Take the network efficiency and the largest connected subgraph as the effective indicators.The results show that the KSD identification method that comprehensively considers the elements has the best recognition effect and has certain practical significance.展开更多
With the rapid increase of the number and influence of floating population in China,it is urgently needed to understand the regional types of China＇s floating population and their spatial characteristics. After revie...With the rapid increase of the number and influence of floating population in China,it is urgently needed to understand the regional types of China＇s floating population and their spatial characteristics. After reviewing the current methods for identifying regional types of floating population,this paper puts forward a new composite-index identification method and its modification version which is consisted of two indexes of the net migration rate and gross migration rate. Then,the traditional single-index and the new composite-index identification methods are empirically tested to explore their spatial patterns and characteristics by using China＇s 2000 census data at county level. The results show：（1） The composite-index identification method is much better than traditional single-index method because it can measure the migration direction and scale of floating simultaneously,and in particular it can identify the unique regional types of floating population with large scale of immigration and emigration. （2） The modified composite-index identification method,by using the share of a region＇s certain type of floating population to the total in China as weights,can effectively correct the over-or under-estimated errors due to the rather large or small total population of a region. （3） The spatial patterns of different regional types of China＇s floating population are closely related to the regional differentiation of their natural environment,population density and socio-economic development level. The three active regional types of floating population are mainly located in the eastern part of China with lower elevation,more than 800 mm precipitation,rather higher population densities and economic development levels.展开更多
Several parameter identification methods of thermal response test were evaluated through numerical and experimental study.A three-dimensional finite-volume numerical model was established under the assumption that the...Several parameter identification methods of thermal response test were evaluated through numerical and experimental study.A three-dimensional finite-volume numerical model was established under the assumption that the soil thermal conductivity had been known in the simulation of thermal response test.The thermal response curve was firstly obtained through numerical calculation.Then,the accuracy of the numerical model was verified with measured data obtained through a thermal response test.Based on the numerical and experimental thermal response curves,the thermal conductivity of the soil was calculated by different parameter identification methods.The calculated results were compared with the assumed value and then the accuracy of these methods was evaluated.Furthermore,the effects of test time,variable data quality,borehole radius,initial ground temperature,and heat injection rate were analyzed.The results show that the method based on cylinder-source model has a low precision and the identified thermal conductivity decreases with an increase in borehole radius.For parameter estimation,the measuring accuracy of the initial temperature of the deep ground soil has greater effect on identified thermal conductivity.展开更多
Traditional Chinese medicines are the material basis for the treatment of diseases under theoretical direction, as well as the raw materials of traditional Chinese medicine decoction pieces and Chinese patent medicine...Traditional Chinese medicines are the material basis for the treatment of diseases under theoretical direction, as well as the raw materials of traditional Chinese medicine decoction pieces and Chinese patent medicines. The quality of traditional Chinese medicine directly influences clinical efficacy. Therefore, the identification of traditional Chinese medicine is the responsibility of medicinal workers. The identification method develops from observation, tasting, smelling and listening to firing method and testing with water, and the construction of fingerprints of traditional Chinese medicines and molecular biological techniques. The development and evolution of traditional Chinese medicine identification methods was reviewed in this paper.展开更多
At present,the identification of tropical cyclone remote precipitation(TRP)requires subjective participation,leading to inconsistent results among different researchers despite adopting the same identification standar...At present,the identification of tropical cyclone remote precipitation(TRP)requires subjective participation,leading to inconsistent results among different researchers despite adopting the same identification standard.Thus,establishing an objective identification method is greatly important.In this study,an objective synoptic analysis technique for TRP(OSAT_TRP)is proposed to identify TRP using daily precipitation datasets,historical tropical cyclone(TC)track data,and the ERA5 reanalysis data.This method includes three steps:first,independent rain belts are separated,and those that might relate to TCs'remote effects are distinguished according to their distance from the TCs.Second,the strong water vapor transport belt from the TC is identified using integrated horizontal water vapor transport(IVT).Third,TRP is distinguished by connecting the first two steps.The TRP obtained through this method can satisfy three criteria,as follows:1)the precipitation occurs outside the circulation of TCs,2)the precipitation is affected by TCs,and 3)a gap exists between the TRP and TC rain belt.Case diagnosis analysis,compared with subjective TRP results and backward trajectory analyses using HYSPLIT,indicates that OSAT_TRP can distinguish TRP even when multiple TCs in the Northwest Pacific are involved.Then,we applied the OSAT_TRP to select typical TRPs and obtained the synoptic-scale environments of the TRP through composite analysis.展开更多
The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of differen...The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of different inorganic components have not yet been fully developed.For this reason,a quantitative characterization method of inorganic pores using pixel information was proposed in this study.A machine learning algorithm was used to assist the field emission scanning electron microscopy(FE-SEM)image processing of shale to realize the accurate identification and quantitative characterization of inorganic pores on the surface of high-precision images of shale with a small view.Moreover,large-view image splicing technology,combined with quantitative evaluation of minerals by scanning electron microscopy(QEMSCAN)image joint characterization technology,was used to accurately analyze the distribution characteristics of inorganic pores under different mineral components.The quantitative methods of pore characteristics of different inorganic components under the pixel information of shale were studied.The results showed that(1)the Waikato Environment for Knowledge Analysis(WEKA)machine learning model can effectively identify and extract shale mineral components and inorganic pore distribution,and the large-view FE-SEM images are representative of samples at the 200μm×200μm view scale,meeting statistical requirements and eliminating the influence of heterogeneity;(2)the pores developed by different mineral components of shale had obvious differences,indicating that the development of inorganic pores is highly correlated with the properties of shale minerals themselves;and(3)the pore-forming ability of different mineral components is calculated by the quantitative method of single component pore-forming coefficient.Chlorite showed the highest pore-forming ability,followed by(in descending order)illite,pyrite,calcite,dolomite,albite,orthoclase,quartz,and apatite.This study contributes to advancing our understanding of inorganic pore characteristics in shale.展开更多
Under low temperature stress,theplasmamembrane and chloroplast of plant cellsare impaired,resulting in electrolyte leakage and al-teration of chlorophyll fluorescence which can bemeasured with conductometer and fluore...Under low temperature stress,theplasmamembrane and chloroplast of plant cellsare impaired,resulting in electrolyte leakage and al-teration of chlorophyll fluorescence which can bemeasured with conductometer and fluoremeter.The cold tolerance of excised leaves of several ricevarieties were determined with these two instru-ments at seedling and heading stages to compare展开更多
The material of nickel aluminum bronze (NAB) presents superior properties such as high strength, excellent wear resistance and stress corrosion resistance and is extensively used for marine propellers. In order to est...The material of nickel aluminum bronze (NAB) presents superior properties such as high strength, excellent wear resistance and stress corrosion resistance and is extensively used for marine propellers. In order to establish the constitutive relation of NAB under high strain rate condition, a new methodology was proposed to accurately identify the constitutive parameters of Johnson?Cook model in machining, combining SHPB tests, predictive cutting force model and orthogonal cutting experiment. Firstly, SHPB tests were carried out to obtain the true stress?strain curves at various temperatures and strain rates. Then, an objective function of the predictive and experimental flow stresses was set up, which put the identified parameters of SHPB tests as the initial value, and utilized the PSO algorithm to identify the constitutive parameters of NAB in machining. Finally, the identified parameters were verified to be sufficiently accurate by comparing the values of cutting forces calculated from the predictive model and FEM simulation.展开更多
Landslides,collapses and cracks are the main types of geological hazards,which threaten the safety of human life and property at all times.In emergency surveying and mapping,it is timeconsuming and laborious to use th...Landslides,collapses and cracks are the main types of geological hazards,which threaten the safety of human life and property at all times.In emergency surveying and mapping,it is timeconsuming and laborious to use the method of field artificial investigation and recognition and using satellite image to identify ground hazards,there are some problems,such as time lag,low resolution,and difficult to select the map on demand.In this paper,a10 cm per pixel resolution photogrammetry of a geological hazard-prone area of Taohuagou,Shanxi Province,China is carried out by DJ 4 UAV.The digital orthophoto model(DOM),digital surface model(DSM) and three-dimensional point cloud model(3 DPCM) are generated in this region.The method of visual interpretation of cracks based on DOM(as main)-3 DPCM(as auxiliary) and landslide and collapse based on 3 DPCM(as main)-DOM and DSM(as auxiliary) are proposed.Based on the low altitude remote sensing image of UAV,the shape characteristics,geological characteristics and distribution of the identified hazards are analyzed.The results show that using UAV low altitude remote sensing image,the method of combination of main and auxiliary data can quickly and accurately identify landslide,collapse and crack,the accuracy of crack identification is 93%,and the accuracy of landslide and collapse identification is 100%.It mainly occurs in silty clay and mudstone geology and is greatly affected by slope foot excavation.This study can play a great role in the recognition of sudden hazards by low altitude remote sensing images of UAV.展开更多
Urban functional area(UFA)is a core scientific issue affecting urban sustainability.The current knowledge gap is mainly reflected in the lack of multi-scale quantitative interpretation methods from the perspective of ...Urban functional area(UFA)is a core scientific issue affecting urban sustainability.The current knowledge gap is mainly reflected in the lack of multi-scale quantitative interpretation methods from the perspective of human-land interaction.In this paper,based on multi-source big data include 250 m×250 m resolution cell phone data,1.81×105 Points of Interest(POI)data and administrative boundary data,we built a UFA identification method and demonstrated empirically in Shenyang City,China.We argue that the method we built can effectively identify multi-scale multi-type UFAs based on human activity and further reveal the spatial correlation between urban facilities and human activity.The empirical study suggests that the employment functional zones in Shenyang City are more concentrated in central cities than other single functional zones.There are more mix functional areas in the central city areas,while the planned industrial new cities need to develop comprehensive functions in Shenyang.UFAs have scale effects and human-land interaction patterns.We suggest that city decision makers should apply multi-sources big data to measure urban functional service in a more refined manner from a supply-demand perspective.展开更多
To relieve traffic congestion in urban rail transit stations,a new identification method of crowded passenger flow based on automatic fare collection data is proposed.First,passenger travel characteristics are analyze...To relieve traffic congestion in urban rail transit stations,a new identification method of crowded passenger flow based on automatic fare collection data is proposed.First,passenger travel characteristics are analyzed by observing the temporal distribution of inflow passengers each hour and the spatial distribution concerning cross-section passenger flow.Secondly,the identification method of crowded passenger flow is proposed to calculate the threshold via the probability density function fitted by Matlab and classify the early-warning situation based on the threshold obtained.Finally,a case study of Xinjiekou station is conducted to prove the validity and practicability of the proposed method.Compared to the traditional methods,the proposed comprehensive method can remove defects such as efficiency and delay.Furthermore,the proposed method is suitable for other rail transit companies equipped with automatic fare collection systems.展开更多
Considering the differences between the Northeast China Cold Vortex （CV） and the Mid-Summer （MS） rainy period and their corresponding atmospheric circulations are comprehensively analyzed, and the objective identi...Considering the differences between the Northeast China Cold Vortex （CV） and the Mid-Summer （MS） rainy period and their corresponding atmospheric circulations are comprehensively analyzed, and the objective identification methods of defining the annual beginning and ending dates of Northeast China CV and MS rainy periods are developed respectively. The annual beginning date of the CV （MS） rainy period is as follows. In a period from April to August, if daily regional mean precipitation ryi is larger than yearly regional mean precipitation R （or 2R） on a certain day, the station precipitation rs is larger than the station yearly mean precipitation （r/ （or 2（r）） in at least 50% of stations in Northeast China, and this condition is satisfied in the following 2 （7） days, then this date is defined as the beginning date of the CV （MS） rainy period. While the definition of the ending date of the MS rainy period shows the opposite process to its beginning date. With this objective identification method, the multi-year average （1981-2010） beginning date of the CV rainy period is May 3, the beginning date of the MS rainy period is June 27, the ending day of the CV rainy period is defined as the day before the beginning date of the MS rainy period, and the ending date of the MS rainy period is August 29. Meanwhile, corresponding anomaly analysis at a 500-hPa geopotential height, 850-hPa wind, Omega and relative humidity fields all show that the definitions of the average beginning and ending dates of the CV and MS rainy periods have a certain circulation meaning. Furthermore, the daily evolution of the CV index, meridional and zonal wind index, etc. all show that these objectively defined beginning and ending dates of the CV and MS rainy periods have climate significance.展开更多
There is an urgent need for the development of a method that can undertake rapid, effective, and accurate monitoring and identification of fog by satellite remote sensing, since heavy fog can cause enormous disasters ...There is an urgent need for the development of a method that can undertake rapid, effective, and accurate monitoring and identification of fog by satellite remote sensing, since heavy fog can cause enormous disasters to China’s national economy and people's lives and property in the urban and coastal areas. In this paper, the correlative relationship between the reflectivity of land surface and clouds in different time phases is found, based on the analysis of the radiative and satellite-based spectral characteristics of fog. Through calculation and analyses of the relative variability of the reflectivity in the images, the threshold to identify quasi-fog areas is generated automatically. Furthermore, using the technique of quick image run-length encoding, and in combination with such practical methods as analyzing texture and shape fractures, smoothness, and template characteristics, the automatic identification of fog and fog-cloud separation using meteorological satellite remote sensing images are studied, with good results in application.展开更多
Conventional attractive magnetic force models (proportional to the coil current squared and inversely proportional to the gap squared) cannot simulate the nonlinear responses of magnetic bearings in the presence of el...Conventional attractive magnetic force models (proportional to the coil current squared and inversely proportional to the gap squared) cannot simulate the nonlinear responses of magnetic bearings in the presence of electromagnetic losses,flux leakage or saturation of iron.In this paper,based on results from an experimental set-up designed to study magnetic force,a novel parametric model is presented in the form of a nonlinear polynomial with unknown coefficients.The parameters of the proposed model are identified using the weighted residual method.Validations of the model identified were performed by comparing the results in time and frequency domains.The results show a good correlation between experiments and numerical simulations.展开更多
In this paper, we present a method for simultaneously identifying the vehicular parameters and the structural damage of bridges. By using the dynamic response data of bridge in coupled vibration state and the algorith...In this paper, we present a method for simultaneously identifying the vehicular parameters and the structural damage of bridges. By using the dynamic response data of bridge in coupled vibration state and the algorithm for the inverse problem, the vehicle-bridge coupling model is built through combining the motion equations of both vehicle and the bridge based on their interaction force relationship at contact point. Load shape function method and Newmark iterative method are used to solve the vibration response of the coupled system. Penalty function method and regularization method are interchangeable in the process until the error is less than the allowable value. The proposed method is applied on a single-span girders bridge, and the recognition results verify the feasibility, high accuracy and robustness of the method.展开更多
Based on measured natural frequencies and acceleration responses,a non-probabilistic information fusion technique is proposed for the structural damage detection by adopting the set-membership identification（SMI） an...Based on measured natural frequencies and acceleration responses,a non-probabilistic information fusion technique is proposed for the structural damage detection by adopting the set-membership identification（SMI） and twostep model updating procedure.Due to the insufficiency and uncertainty of information obtained from measurements,the uncertain problem of damage identification is addressed with interval variables in this paper.Based on the first-order Taylor series expansion,the interval bounds of the elemental stiffness parameters in undamaged and damaged models are estimated,respectively.The possibility of damage existence（PoDE） in elements is proposed as the quantitative measure of structural damage probability,which is more reasonable in the condition of insufficient measurement data.In comparison with the identification method based on a single kind of information,the SMI method will improve the accuracy in damage identification,which reflects the information fusion concept based on the non-probabilistic set.A numerical example is performed to demonstrate the feasibility and effectiveness of the proposed technique.展开更多
An improved covariance driven subspace identification method is presented to identify the weakly excited modes.In this method,the traditional Hankel matrix is replaced by a reformed one to enhance the identifiability ...An improved covariance driven subspace identification method is presented to identify the weakly excited modes.In this method,the traditional Hankel matrix is replaced by a reformed one to enhance the identifiability of weak characteristics.The robustness of eigenparameter estimation to noise contamination is reinforced by the improved Hankel matrix,in combination with component energy index(CEI)which indicates the vibration intensity of signal components,an alternative stabilization diagram is adopted to effectively separate spurious and physical modes.Simulation of a vibration system of multiple-degree-of-freedom and experiment of a frame structure subject to wind excitation are presented to demonstrate the improvement of the proposed blind method.The performance of this blind method is assessed in terms of its capability in extracting the weak modes as well as the accuracy of estimated parameters.The results have shown that the proposed blind method gives a better estimation of the weak modes from response signals of small signal to noise ratio(SNR)and gives a reliable separation of spurious and physical estimates.展开更多
The meaning of each part of the screw-on curve,the definition of shoulder torque,and the common characteristics of the screw-on curve are introduced.Moreover,the principle and shortcomings of the commonly used method ...The meaning of each part of the screw-on curve,the definition of shoulder torque,and the common characteristics of the screw-on curve are introduced.Moreover,the principle and shortcomings of the commonly used method of curve curvature radius are discussed.A new method of sealing surface deformation is proposed based on the requirements of shoulder torque recognition.The calculation method and principle of PW value are elucidated and the advantages of this method are summarized.The proposed method considers the difference value of tightening torque and calculates the elastic deformation of the sealing surface,accurately reflecting the state of the thread compound and the correlation between torque change and elastic deformation of the sealing surface after compression.展开更多
基金Supported by the National Natural Science Foundation of China(Nos.52222904 and 52309117)China Postdoctoral Science Foundation(Nos.2022TQ0168 and 2023M731895).
文摘Ocean energy has progressively gained considerable interest due to its sufficient potential to meet the world’s energy demand,and the blade is the core component in electricity generation from the ocean current.However,the widened hydraulic excitation frequency may satisfy the blade resonance due to the time variation in the velocity and angle of attack of the ocean current,even resulting in blade fatigue and destructively interfering with grid stability.A key parameter that determines the resonance amplitude of the blade is the hydrodynamic damping ratio(HDR).However,HDR is difficult to obtain due to the complex fluid-structure interaction(FSI).Therefore,a literature review was conducted on the hydrodynamic damping characteristics of blade-like structures.The experimental and simulation methods used to identify and obtain the HDR quantitatively were described,placing emphasis on the experimental processes and simulation setups.Moreover,the accuracy and efficiency of different simulation methods were compared,and the modal work approach was recommended.The effects of key typical parameters,including flow velocity,angle of attack,gap,rotational speed,and cavitation,on the HDR were then summarized,and the suggestions on operating conditions were presented from the perspective of increasing the HDR.Subsequently,considering multiple flow parameters,several theoretical derivations and semi-empirical prediction formulas for HDR were introduced,and the accuracy and application were discussed.Based on the shortcomings of the existing research,the direction of future research was finally determined.The current work offers a clear understanding of the HDR of blade-like structures,which could improve the evaluation accuracy of flow-induced vibration in the design stage.
基金supported by the National Natural Science Foundation of China(Grant No.61961019)the Youth Key Project of the Natural Science Foundation of Jiangxi Province of China(Grant No.20202ACBL212003).
文摘The identification of key nodes plays an important role in improving the robustness of the transportation network.For different types of transportation networks,the effect of the same identification method may be different.It is of practical significance to study the key nodes identification methods corresponding to various types of transportation networks.Based on the knowledge of complex networks,the metro networks and the bus networks are selected as the objects,and the key nodes are identified by the node degree identification method,the neighbor node degree identification method,the weighted k-shell degree neighborhood identification method(KSD),the degree k-shell identification method(DKS),and the degree k-shell neighborhood identification method(DKSN).Take the network efficiency and the largest connected subgraph as the effective indicators.The results show that the KSD identification method that comprehensively considers the elements has the best recognition effect and has certain practical significance.
基金Foundation： Knowledge Innovation Program of the Chinese Academy of Sciences, No.KZCX2-YW-322, National Natural Science Foundation of China, No.40971102 The National Science and Technology Support Plan, No.2006BAJ11B02-04
文摘With the rapid increase of the number and influence of floating population in China,it is urgently needed to understand the regional types of China＇s floating population and their spatial characteristics. After reviewing the current methods for identifying regional types of floating population,this paper puts forward a new composite-index identification method and its modification version which is consisted of two indexes of the net migration rate and gross migration rate. Then,the traditional single-index and the new composite-index identification methods are empirically tested to explore their spatial patterns and characteristics by using China＇s 2000 census data at county level. The results show：（1） The composite-index identification method is much better than traditional single-index method because it can measure the migration direction and scale of floating simultaneously,and in particular it can identify the unique regional types of floating population with large scale of immigration and emigration. （2） The modified composite-index identification method,by using the share of a region＇s certain type of floating population to the total in China as weights,can effectively correct the over-or under-estimated errors due to the rather large or small total population of a region. （3） The spatial patterns of different regional types of China＇s floating population are closely related to the regional differentiation of their natural environment,population density and socio-economic development level. The three active regional types of floating population are mainly located in the eastern part of China with lower elevation,more than 800 mm precipitation,rather higher population densities and economic development levels.
基金Project(xjj20100078) supported by the Fundamental Research Funds for the Central Universities in China
文摘Several parameter identification methods of thermal response test were evaluated through numerical and experimental study.A three-dimensional finite-volume numerical model was established under the assumption that the soil thermal conductivity had been known in the simulation of thermal response test.The thermal response curve was firstly obtained through numerical calculation.Then,the accuracy of the numerical model was verified with measured data obtained through a thermal response test.Based on the numerical and experimental thermal response curves,the thermal conductivity of the soil was calculated by different parameter identification methods.The calculated results were compared with the assumed value and then the accuracy of these methods was evaluated.Furthermore,the effects of test time,variable data quality,borehole radius,initial ground temperature,and heat injection rate were analyzed.The results show that the method based on cylinder-source model has a low precision and the identified thermal conductivity decreases with an increase in borehole radius.For parameter estimation,the measuring accuracy of the initial temperature of the deep ground soil has greater effect on identified thermal conductivity.
基金Supported by Zhuang Yao Medicine Collaborative Innovation Center(GJKY[2013]20)Guangxi Key Laboratory of Zhuang Yao Medicine(GKJZ[2014]32)+2 种基金Guangxi Key Discipline:Zhuang Pharmacy(GJKY[2013]16)Chinese Traditional Medicine Innovation Theory and Drug Efficacy Study of Bagui Scholars(J13162)National Natural Science Foundation of China(81260620)
文摘Traditional Chinese medicines are the material basis for the treatment of diseases under theoretical direction, as well as the raw materials of traditional Chinese medicine decoction pieces and Chinese patent medicines. The quality of traditional Chinese medicine directly influences clinical efficacy. Therefore, the identification of traditional Chinese medicine is the responsibility of medicinal workers. The identification method develops from observation, tasting, smelling and listening to firing method and testing with water, and the construction of fingerprints of traditional Chinese medicines and molecular biological techniques. The development and evolution of traditional Chinese medicine identification methods was reviewed in this paper.
基金supported by the Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX22_1136)the National Natural Scientific Foundation of China(No.42275037)+2 种基金the Basic Research Fund of CAMS(No.2023Z016)the Key Laboratory of South China Sea Meteorological Disaster Prevention and Mitigation of Hainan Province(No.SCSF202202)supported by the Jiangsu Collaborative Innovation Center for Climate Change。
文摘At present,the identification of tropical cyclone remote precipitation(TRP)requires subjective participation,leading to inconsistent results among different researchers despite adopting the same identification standard.Thus,establishing an objective identification method is greatly important.In this study,an objective synoptic analysis technique for TRP(OSAT_TRP)is proposed to identify TRP using daily precipitation datasets,historical tropical cyclone(TC)track data,and the ERA5 reanalysis data.This method includes three steps:first,independent rain belts are separated,and those that might relate to TCs'remote effects are distinguished according to their distance from the TCs.Second,the strong water vapor transport belt from the TC is identified using integrated horizontal water vapor transport(IVT).Third,TRP is distinguished by connecting the first two steps.The TRP obtained through this method can satisfy three criteria,as follows:1)the precipitation occurs outside the circulation of TCs,2)the precipitation is affected by TCs,and 3)a gap exists between the TRP and TC rain belt.Case diagnosis analysis,compared with subjective TRP results and backward trajectory analyses using HYSPLIT,indicates that OSAT_TRP can distinguish TRP even when multiple TCs in the Northwest Pacific are involved.Then,we applied the OSAT_TRP to select typical TRPs and obtained the synoptic-scale environments of the TRP through composite analysis.
基金supported by the National Natural Science Foundation of China(42372144)the Natural Science Foundation of Xinjiang Uygur Autonomous Region(2024D01E09)the Strategic Cooperation Technology Projects of CNPC and CUPB(ZLZX2020-01-05).
文摘The types and structures of inorganic pores are key factors in evaluations of the reservoir space and distribution characteristics of shale oil and gas.However,quantitative identification methods for pores of different inorganic components have not yet been fully developed.For this reason,a quantitative characterization method of inorganic pores using pixel information was proposed in this study.A machine learning algorithm was used to assist the field emission scanning electron microscopy(FE-SEM)image processing of shale to realize the accurate identification and quantitative characterization of inorganic pores on the surface of high-precision images of shale with a small view.Moreover,large-view image splicing technology,combined with quantitative evaluation of minerals by scanning electron microscopy(QEMSCAN)image joint characterization technology,was used to accurately analyze the distribution characteristics of inorganic pores under different mineral components.The quantitative methods of pore characteristics of different inorganic components under the pixel information of shale were studied.The results showed that(1)the Waikato Environment for Knowledge Analysis(WEKA)machine learning model can effectively identify and extract shale mineral components and inorganic pore distribution,and the large-view FE-SEM images are representative of samples at the 200μm×200μm view scale,meeting statistical requirements and eliminating the influence of heterogeneity;(2)the pores developed by different mineral components of shale had obvious differences,indicating that the development of inorganic pores is highly correlated with the properties of shale minerals themselves;and(3)the pore-forming ability of different mineral components is calculated by the quantitative method of single component pore-forming coefficient.Chlorite showed the highest pore-forming ability,followed by(in descending order)illite,pyrite,calcite,dolomite,albite,orthoclase,quartz,and apatite.This study contributes to advancing our understanding of inorganic pore characteristics in shale.
文摘Under low temperature stress,theplasmamembrane and chloroplast of plant cellsare impaired,resulting in electrolyte leakage and al-teration of chlorophyll fluorescence which can bemeasured with conductometer and fluoremeter.The cold tolerance of excised leaves of several ricevarieties were determined with these two instru-ments at seedling and heading stages to compare
基金Project(2014CB046704)supported by the National Basic Research Program of ChinaProject(2014BAB13B01)supported by the National Science and Technology Pillar Program of China
文摘The material of nickel aluminum bronze (NAB) presents superior properties such as high strength, excellent wear resistance and stress corrosion resistance and is extensively used for marine propellers. In order to establish the constitutive relation of NAB under high strain rate condition, a new methodology was proposed to accurately identify the constitutive parameters of Johnson?Cook model in machining, combining SHPB tests, predictive cutting force model and orthogonal cutting experiment. Firstly, SHPB tests were carried out to obtain the true stress?strain curves at various temperatures and strain rates. Then, an objective function of the predictive and experimental flow stresses was set up, which put the identified parameters of SHPB tests as the initial value, and utilized the PSO algorithm to identify the constitutive parameters of NAB in machining. Finally, the identified parameters were verified to be sufficiently accurate by comparing the values of cutting forces calculated from the predictive model and FEM simulation.
基金supported by the National Natural Science Foundation of China (Award Number: 51704205)Key R & D Plan projects in Shanxi Province of China (Award Number: 201803D31044)+1 种基金Education Department Natural Science Foundation in Guizhou of China (Award Number: KY (2017) 097)the High-Level Talents Fund of Guizhou University of Engineering Science (Award Number: G2015005)。
文摘Landslides,collapses and cracks are the main types of geological hazards,which threaten the safety of human life and property at all times.In emergency surveying and mapping,it is timeconsuming and laborious to use the method of field artificial investigation and recognition and using satellite image to identify ground hazards,there are some problems,such as time lag,low resolution,and difficult to select the map on demand.In this paper,a10 cm per pixel resolution photogrammetry of a geological hazard-prone area of Taohuagou,Shanxi Province,China is carried out by DJ 4 UAV.The digital orthophoto model(DOM),digital surface model(DSM) and three-dimensional point cloud model(3 DPCM) are generated in this region.The method of visual interpretation of cracks based on DOM(as main)-3 DPCM(as auxiliary) and landslide and collapse based on 3 DPCM(as main)-DOM and DSM(as auxiliary) are proposed.Based on the low altitude remote sensing image of UAV,the shape characteristics,geological characteristics and distribution of the identified hazards are analyzed.The results show that using UAV low altitude remote sensing image,the method of combination of main and auxiliary data can quickly and accurately identify landslide,collapse and crack,the accuracy of crack identification is 93%,and the accuracy of landslide and collapse identification is 100%.It mainly occurs in silty clay and mudstone geology and is greatly affected by slope foot excavation.This study can play a great role in the recognition of sudden hazards by low altitude remote sensing images of UAV.
基金Under the auspices of Natural Science Foundation of China(No.41971166)。
文摘Urban functional area(UFA)is a core scientific issue affecting urban sustainability.The current knowledge gap is mainly reflected in the lack of multi-scale quantitative interpretation methods from the perspective of human-land interaction.In this paper,based on multi-source big data include 250 m×250 m resolution cell phone data,1.81×105 Points of Interest(POI)data and administrative boundary data,we built a UFA identification method and demonstrated empirically in Shenyang City,China.We argue that the method we built can effectively identify multi-scale multi-type UFAs based on human activity and further reveal the spatial correlation between urban facilities and human activity.The empirical study suggests that the employment functional zones in Shenyang City are more concentrated in central cities than other single functional zones.There are more mix functional areas in the central city areas,while the planned industrial new cities need to develop comprehensive functions in Shenyang.UFAs have scale effects and human-land interaction patterns.We suggest that city decision makers should apply multi-sources big data to measure urban functional service in a more refined manner from a supply-demand perspective.
基金The National Key Research and Development Program of China(No.2016YFE0206800)
文摘To relieve traffic congestion in urban rail transit stations,a new identification method of crowded passenger flow based on automatic fare collection data is proposed.First,passenger travel characteristics are analyzed by observing the temporal distribution of inflow passengers each hour and the spatial distribution concerning cross-section passenger flow.Secondly,the identification method of crowded passenger flow is proposed to calculate the threshold via the probability density function fitted by Matlab and classify the early-warning situation based on the threshold obtained.Finally,a case study of Xinjiekou station is conducted to prove the validity and practicability of the proposed method.Compared to the traditional methods,the proposed comprehensive method can remove defects such as efficiency and delay.Furthermore,the proposed method is suitable for other rail transit companies equipped with automatic fare collection systems.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.41205040 and 41375078)the State Key Development Program for Basic Research,China(Grant No.2012CB955203)the Special Scientific Research Project for Public Interest(Grant No.GYHY201306021)
文摘Considering the differences between the Northeast China Cold Vortex （CV） and the Mid-Summer （MS） rainy period and their corresponding atmospheric circulations are comprehensively analyzed, and the objective identification methods of defining the annual beginning and ending dates of Northeast China CV and MS rainy periods are developed respectively. The annual beginning date of the CV （MS） rainy period is as follows. In a period from April to August, if daily regional mean precipitation ryi is larger than yearly regional mean precipitation R （or 2R） on a certain day, the station precipitation rs is larger than the station yearly mean precipitation （r/ （or 2（r）） in at least 50% of stations in Northeast China, and this condition is satisfied in the following 2 （7） days, then this date is defined as the beginning date of the CV （MS） rainy period. While the definition of the ending date of the MS rainy period shows the opposite process to its beginning date. With this objective identification method, the multi-year average （1981-2010） beginning date of the CV rainy period is May 3, the beginning date of the MS rainy period is June 27, the ending day of the CV rainy period is defined as the day before the beginning date of the MS rainy period, and the ending date of the MS rainy period is August 29. Meanwhile, corresponding anomaly analysis at a 500-hPa geopotential height, 850-hPa wind, Omega and relative humidity fields all show that the definitions of the average beginning and ending dates of the CV and MS rainy periods have a certain circulation meaning. Furthermore, the daily evolution of the CV index, meridional and zonal wind index, etc. all show that these objectively defined beginning and ending dates of the CV and MS rainy periods have climate significance.
基金Key research project "Research of Shanghai City and Costal Heavy Fog Remote Sensing Detecting and Warning System" of Science and Technology Commission of Shanghai Municipality (075115011)
文摘There is an urgent need for the development of a method that can undertake rapid, effective, and accurate monitoring and identification of fog by satellite remote sensing, since heavy fog can cause enormous disasters to China’s national economy and people's lives and property in the urban and coastal areas. In this paper, the correlative relationship between the reflectivity of land surface and clouds in different time phases is found, based on the analysis of the radiative and satellite-based spectral characteristics of fog. Through calculation and analyses of the relative variability of the reflectivity in the images, the threshold to identify quasi-fog areas is generated automatically. Furthermore, using the technique of quick image run-length encoding, and in combination with such practical methods as analyzing texture and shape fractures, smoothness, and template characteristics, the automatic identification of fog and fog-cloud separation using meteorological satellite remote sensing images are studied, with good results in application.
文摘Conventional attractive magnetic force models (proportional to the coil current squared and inversely proportional to the gap squared) cannot simulate the nonlinear responses of magnetic bearings in the presence of electromagnetic losses,flux leakage or saturation of iron.In this paper,based on results from an experimental set-up designed to study magnetic force,a novel parametric model is presented in the form of a nonlinear polynomial with unknown coefficients.The parameters of the proposed model are identified using the weighted residual method.Validations of the model identified were performed by comparing the results in time and frequency domains.The results show a good correlation between experiments and numerical simulations.
基金Supported by the National Natural Science Foundation of China(41402271)Guizhou Science and Technology Cooperation Project(LH[2016]7043)Young Science and Technology Talents Growth Project of Guizhou Provincial Department of Education(KY-[2016]-282)
文摘In this paper, we present a method for simultaneously identifying the vehicular parameters and the structural damage of bridges. By using the dynamic response data of bridge in coupled vibration state and the algorithm for the inverse problem, the vehicle-bridge coupling model is built through combining the motion equations of both vehicle and the bridge based on their interaction force relationship at contact point. Load shape function method and Newmark iterative method are used to solve the vibration response of the coupled system. Penalty function method and regularization method are interchangeable in the process until the error is less than the allowable value. The proposed method is applied on a single-span girders bridge, and the recognition results verify the feasibility, high accuracy and robustness of the method.
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education (20091102120023)the Aeronautical Science Foundation of China (2012ZA51010)+1 种基金the National Natural Science Foundation of China (11002013)Defense Industrial Technology Development Program (A2120110001 and B2120110011)
文摘Based on measured natural frequencies and acceleration responses,a non-probabilistic information fusion technique is proposed for the structural damage detection by adopting the set-membership identification（SMI） and twostep model updating procedure.Due to the insufficiency and uncertainty of information obtained from measurements,the uncertain problem of damage identification is addressed with interval variables in this paper.Based on the first-order Taylor series expansion,the interval bounds of the elemental stiffness parameters in undamaged and damaged models are estimated,respectively.The possibility of damage existence（PoDE） in elements is proposed as the quantitative measure of structural damage probability,which is more reasonable in the condition of insufficient measurement data.In comparison with the identification method based on a single kind of information,the SMI method will improve the accuracy in damage identification,which reflects the information fusion concept based on the non-probabilistic set.A numerical example is performed to demonstrate the feasibility and effectiveness of the proposed technique.
基金This project is supported by National Natural Science Foundation of China(No.10302019).
文摘An improved covariance driven subspace identification method is presented to identify the weakly excited modes.In this method,the traditional Hankel matrix is replaced by a reformed one to enhance the identifiability of weak characteristics.The robustness of eigenparameter estimation to noise contamination is reinforced by the improved Hankel matrix,in combination with component energy index(CEI)which indicates the vibration intensity of signal components,an alternative stabilization diagram is adopted to effectively separate spurious and physical modes.Simulation of a vibration system of multiple-degree-of-freedom and experiment of a frame structure subject to wind excitation are presented to demonstrate the improvement of the proposed blind method.The performance of this blind method is assessed in terms of its capability in extracting the weak modes as well as the accuracy of estimated parameters.The results have shown that the proposed blind method gives a better estimation of the weak modes from response signals of small signal to noise ratio(SNR)and gives a reliable separation of spurious and physical estimates.
文摘The meaning of each part of the screw-on curve,the definition of shoulder torque,and the common characteristics of the screw-on curve are introduced.Moreover,the principle and shortcomings of the commonly used method of curve curvature radius are discussed.A new method of sealing surface deformation is proposed based on the requirements of shoulder torque recognition.The calculation method and principle of PW value are elucidated and the advantages of this method are summarized.The proposed method considers the difference value of tightening torque and calculates the elastic deformation of the sealing surface,accurately reflecting the state of the thread compound and the correlation between torque change and elastic deformation of the sealing surface after compression.
