Numerical simulation plays an important role in the dynamic analysis of multibody system.With the rapid development of computer science,the numerical solution technology has been further developed.Recently,data-driven...Numerical simulation plays an important role in the dynamic analysis of multibody system.With the rapid development of computer science,the numerical solution technology has been further developed.Recently,data-driven method has become a very popular computing method.However,due to lack of necessary mechanism information of the traditional pure data-driven methods based on neural network,its numerical accuracy cannot be guaranteed for strong nonlinear system.Therefore,this work proposes a mechanism-data hybrid-driven strategy for solving nonlinear multibody system based on physics-informed neural network to overcome the limitation of traditional data-driven methods.The strategy proposed in this paper introduces scaling coefficients to introduce the dynamic model of multibody system into neural network,ensuring that the training results of neural network conform to the mechanics principle of the system,thereby ensuring the good reliability of the data-driven method.Finally,the stability,generalization ability and numerical accuracy of the proposed method are discussed and analyzed using three typical multibody systems,and the constrained default situations can be controlled within the range of 10^(-2)-10^(-4).展开更多
PETREL, a winged hybrid-driven underwater glider is a novel and practical marine survey platform which combines the features of legacy underwater glider and conventional AUV （autonomous underwater vehicle）. It can b...PETREL, a winged hybrid-driven underwater glider is a novel and practical marine survey platform which combines the features of legacy underwater glider and conventional AUV （autonomous underwater vehicle）. It can be treated as a multi-rigid-body system with a floating base and a particular hydrodynamic profile. In this paper, theorems on linear and angular momentum are used to establish the dynamic equations of motion of each rigid body and the effect of translational and rotational motion of internal masses on the attitude control are taken into consideration. In addition, due to the unique external shape with fixed wings and deflectable rudders and the dual-drive operation in thrust and glide modes, the approaches of building dynamic model of conventional AUV and hydrodynamic model of submarine are introduced, and the tailored dynamic equations of the hybrid glider are formulated. Moreover, the behaviors of motion in glide and thrust operation are analyzed based on the simulation and the feasibility of the dynamic model is validated by data from lake field trials.展开更多
Hybrid-driven underwater glider is a new type of tmmanned underwater vehicle, which combines the advantages of autonomous underwater vehicles and traditional underwater gliders. The autonomous underwater vehicles have...Hybrid-driven underwater glider is a new type of tmmanned underwater vehicle, which combines the advantages of autonomous underwater vehicles and traditional underwater gliders. The autonomous underwater vehicles have good maneuverability and can travel with a high speed, while the traditional underwater gliders are highlighted by low power consumption, long voyage, long endurance and good stealth characteristics. The hybrid-driven underwater gliders can realize variable motion profiles by their own buoyancy-driven and propeller propulsion systems. Stability of the mechanical system determines the performance of the system. In this paper, the Petrel-II hybrid-driven underwater glider developed by Tianjin University is selected as the research object and the stability of hybrid-driven underwater glider unitedly controlled by buoyancy and propeller has been targeted and evidenced. The dimensionless equations of the hybrid-driven underwater glider are obtained when the propeller is working. Then, the steady speed and steady glide path angle under steady-state motion have also been achieved. The steady-state operating conditions can be calculated when the hybrid-driven underwater glider reaches the desired steady-state motion. And the steady- state operating conditions are relatively conservative at the lower bound of the velocity range compared with the range of the velocity derived from the method of the composite Lyapunov function. By calculating the hydrodynamic coefficients of the Petrel-II hybrid-driven underwater glider, the simulation analysis has been conducted. In addition, the results of the field trials conducted in the South China Sea and the Danjiangkou Reservoir of China have been presented to illustrate the validity of the analysis and simulations.and to show the feasibility of the method of the composite Lyapunov function which verifies the stability of the Petrel-II hybrid-driven underwater glider.展开更多
Different from conventional mechanical systems with single degree of freedom (DOF), the main idea of the system of hybrid-driven precision press is to combine the motion of a constant speed motor with a servomotor via...Different from conventional mechanical systems with single degree of freedom (DOF), the main idea of the system of hybrid-driven precision press is to combine the motion of a constant speed motor with a servomotor via a two-DOF mechanism to provide flexible output. In order to make the feasibility clear, this paper studies theoretically the dynamic characteristics of this hybrid-driven mechanical system.Firstly,the dynamics model of the whole electromechanical system is set up by combining dynamic equations of DC motors with those of two-DOF nine-bar mechanism deduced by the Lagrange′s formula. Secondly through the numerical solution with the fourth Runge-Kutta, computer simulation about the dynamics is done, which shows that the designed and optimized hybrid-driven precision press is feasible in theory. These provide theoretical basis for later experimental research.展开更多
The concept of virtual slider crank mechanism is proposed and decoupled to obtain parameters of controllable five bar mechanism without any principle error for any given trajectory. The model is simple and easy to sol...The concept of virtual slider crank mechanism is proposed and decoupled to obtain parameters of controllable five bar mechanism without any principle error for any given trajectory. The model is simple and easy to solve. This method has no convergence,flexible workspace and singularity of the mechanism problem. Through this method,we don’ t need any curve to fit the trajectory point. Using MATLAB program to calculate,the computation time can be reduced to less than 3% of the original. Finally,an example is given to illustrate the method which is meanwhile compared with the traditional five bar design method.展开更多
为有效提升配电网韧性,提出了一种基于数据-模型混合驱动的多类型移动应急资源优化调度方法。首先,考虑到交通道路状态动态变化对移动储能车(mobile energy storage system,MESS)和应急抢修队(repair crew,RC)策略的影响,构建了以电力-...为有效提升配电网韧性,提出了一种基于数据-模型混合驱动的多类型移动应急资源优化调度方法。首先,考虑到交通道路状态动态变化对移动储能车(mobile energy storage system,MESS)和应急抢修队(repair crew,RC)策略的影响,构建了以电力-交通耦合网总损失成本最小为目标的多类型移动应急资源随机优化调度模型。然后,为了实时准确地求解MESS和RC最优路由和调度策略,提出了一种数据-模型混合驱动方法对所构建的复杂非线性随机优化模型进行求解。在数据驱动部分提出一种图注意力网络多智能体强化学习算法,以求解考虑交通网道路修复时间和移动应急资源邻接关系动态变化等不确定因素的MESS和RC最优路由策略。所提算法有效结合多种改进策略和优先经验回放策略以提高算法的采样效率和训练效果。在模型驱动部分采用二阶锥松弛和大M法将多类型移动应急资源优化调度问题构建为混合整数二阶锥规划模型以求解可再生能源出力和配电网负荷变化影响下MESS和RC最优调度策略。最后,在2个不同规模的电力-交通耦合网中验证所提方法的有效性、泛化能力和可拓展能力。展开更多
Aiming at decreasing the component complexity and cost of flower transplanting machine,an integrated transplanting method for picking and planting flower seedlings was proposed,and a hybrid-driven five-bar parallel me...Aiming at decreasing the component complexity and cost of flower transplanting machine,an integrated transplanting method for picking and planting flower seedlings was proposed,and a hybrid-driven five-bar parallel mechanism was designed.A“beak-shaped”trajectory was designed for integrated transplanting requirements,and meantime,either the posture requirements of transplanting claw were determined.Based on the transplanting trajectory of the mechanism,a corresponding mathematical model for solving the link parameters was established,and then the five-bar mechanism was divided into two bar groups,optimization was conducted in two steps based on genetic algorithm and NSGA-II algorithm.Consequently,the optimal solution of the hybrid-driven five-bar parallel mechanism for flower seedling transplanting was obtained.Compared with similar designs,the trajectory displacement of the proposed mechanism is larger in the condition of smaller link size,which indicates that the mechanism can effectively decrease the machine size.The real-time controllable motor angular acceleration fluctuation is smaller and the commutation times are less,which has the advantage of reducing the difficulty of the mechanism control system.Subsequently,the correctness of the design method is verified by kinematics simulation.Finally,the synchronous linkage motion control methods of the two motors were designed,a transplanting experiment of the prototype was carried out,the picking success rate had reached 90%-93.4%and transplanting success rate was 80.5%-86.9%during experiment,which showed that the integrated operation of picking and planting flower seedlings can be realized by the proposed mechanism.展开更多
Hybrid-driven technology,which can improve the sailing performance of underwater gliders(UGs),has been successfully used in ocean observation.However,a hybrid-driven UG(HUG)with an added tail propeller is still unable...Hybrid-driven technology,which can improve the sailing performance of underwater gliders(UGs),has been successfully used in ocean observation.However,a hybrid-driven UG(HUG)with an added tail propeller is still unable to achieve backward and turning motion with a body length radius,and the hydrodynamic pitch moment acting on the HUG that is mainly caused by the fixed-wing makes it difficult to achieve high-precision attitude control during fixed-depth navigation.To solve this problem,a two-degree-of-freedom bioinspired controllable wing mechanism(CWM)is proposed to improve the maneuverability and cruising ability of HUGs.The CWM can realize five motion modes:modifying the dihedral angle or anhedral angle,changing the frontal area of the wing,switching the wing from horizontal to be a vertical rudder,flapping the wing as propulsion,and rotating the wing as a vector propeller.First,the design process of the CWM is provided,and hydrodynamic forces in each motion mode of three CWMs with different trailing edge sweepback angles(TESA)and attitude angles are analyzed through computational fluid dynamics simulation.The relationship between hydrodynamics and the attitude angles or TESA of the CWM is analyzed.Then,experiments are conducted to measure the hydrodynamics of the CWM when it is in a flapping wing mode and rotating the wing as a vector propeller,respectively.The hydrodynamic forces obtained from the simulation are consistent with data measured by a force sensor,proving the credibility of the simulated hydrodynamics.Subsequently,by applying the results of the hydrodynamic force in this study,the flapping trajectory of the wingtip is planned using the cubic spline interpolation method.Furthermore,two underwater demo vehicles with a pair of CWMs are developed,and experiments are conducted in a water tank,further validating and demonstrating the feasibility of the proposed CWM.展开更多
An efficient neural mode-solving operator is proposed for evaluating the propagation properties of optical fibers.By incorporating the governing Helmholtz equation into training,the working mechanism of the proposed o...An efficient neural mode-solving operator is proposed for evaluating the propagation properties of optical fibers.By incorporating the governing Helmholtz equation into training,the working mechanism of the proposed operator adheres to the physics essence of fiber analysis.The training of the mode-solving operator adopts a hybrid physics-informed and data-driven approach,providing the advantages of strong physical consistency,enhanced prediction accuracy,and reduced data dependency in comparison with purely datadriven methods.Benefiting from the improvements in network input-output mapping formulation,the proposed operator offers broader applicability to different fiber types and greater flexibility for property optimization.Combined with the particle swarm optimization and refractive index optimization,the operator demonstrates its capacity for the inverse design of multi-step-index fibers(MSIFs)and graded-index fibers(GRIFs).For MSIFs,to ensure a low mode crosstalk for short-distance transmission systems,optimized refractive index profiles(RIPs)of both three-ring and four-ring structures are obtained from large structure parameter search spaces.For GRIFs,to ensure a low receiving complexity for long-haul transmission systems,optimized RIP with low root mean square mode group delay is obtained through point-wise fine-tuning.Moreover,the operator is capable of analyzing the effect of dopant diffusion in manufacturing.展开更多
针对轮毂电机驱动汽车(hub motor driven vehicle,HMDV)因开关磁阻电机自重和电机气隙偏心导致产生的垂向振动负效应严重恶化车辆的平顺性和操稳性的问题,提出一种基于分数阶滑模控制的HMDV可控动惯性悬架优化设计方法。首先,在轮毂驱...针对轮毂电机驱动汽车(hub motor driven vehicle,HMDV)因开关磁阻电机自重和电机气隙偏心导致产生的垂向振动负效应严重恶化车辆的平顺性和操稳性的问题,提出一种基于分数阶滑模控制的HMDV可控动惯性悬架优化设计方法。首先,在轮毂驱动电机气隙偏心产生的不平衡径向力基础上,建立HMDV 1/4混棚动惯性悬架,理论证明二阶混棚正实网络的优异性能;其次,采用HMDV二阶混棚正实网络作为参考模型,构建基于分数阶滑模控制理论的HMDV协调控制系统,在随机路面下进行平顺性仿真和分析;最后,进行HMDV 1/4悬架台架试验。试验结果表明,HMDV可控动惯性悬架与HMDV传统被动悬架相比,车身加速度均方根值、悬架动行程均方根值以及轮胎动载荷均方根值最大降幅分别为7.72%、30.64%以及11.54%。验证了所设计的HMDV可控动惯性悬架对于由开关磁阻电机造成的垂向振动负效应有优异的抑制性能。展开更多
基金supported by the National Natural Science Foundation of China(Grant No.U2241263)the fellowship of China Postdoctoral Science Foundation(Grant No.2024M750310).
文摘Numerical simulation plays an important role in the dynamic analysis of multibody system.With the rapid development of computer science,the numerical solution technology has been further developed.Recently,data-driven method has become a very popular computing method.However,due to lack of necessary mechanism information of the traditional pure data-driven methods based on neural network,its numerical accuracy cannot be guaranteed for strong nonlinear system.Therefore,this work proposes a mechanism-data hybrid-driven strategy for solving nonlinear multibody system based on physics-informed neural network to overcome the limitation of traditional data-driven methods.The strategy proposed in this paper introduces scaling coefficients to introduce the dynamic model of multibody system into neural network,ensuring that the training results of neural network conform to the mechanics principle of the system,thereby ensuring the good reliability of the data-driven method.Finally,the stability,generalization ability and numerical accuracy of the proposed method are discussed and analyzed using three typical multibody systems,and the constrained default situations can be controlled within the range of 10^(-2)-10^(-4).
基金supported by the National Natural Science Foundation of China(Grant Nos. 50835006 and 51005161)the Science & Technology Support Planning Foundation of Tianjin(Grant No. 09ZCKFGX03000)the Natural Science Foundation of Tianjin(Grant No. 09JCZDJC23400)
文摘PETREL, a winged hybrid-driven underwater glider is a novel and practical marine survey platform which combines the features of legacy underwater glider and conventional AUV （autonomous underwater vehicle）. It can be treated as a multi-rigid-body system with a floating base and a particular hydrodynamic profile. In this paper, theorems on linear and angular momentum are used to establish the dynamic equations of motion of each rigid body and the effect of translational and rotational motion of internal masses on the attitude control are taken into consideration. In addition, due to the unique external shape with fixed wings and deflectable rudders and the dual-drive operation in thrust and glide modes, the approaches of building dynamic model of conventional AUV and hydrodynamic model of submarine are introduced, and the tailored dynamic equations of the hybrid glider are formulated. Moreover, the behaviors of motion in glide and thrust operation are analyzed based on the simulation and the feasibility of the dynamic model is validated by data from lake field trials.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51475319 and 51722508)the National Key R&D Plan(Grant No.2016YFC0301100)Aoshan Talents Program of Qingdao National Laboratory for Marine Science and Technology
文摘Hybrid-driven underwater glider is a new type of tmmanned underwater vehicle, which combines the advantages of autonomous underwater vehicles and traditional underwater gliders. The autonomous underwater vehicles have good maneuverability and can travel with a high speed, while the traditional underwater gliders are highlighted by low power consumption, long voyage, long endurance and good stealth characteristics. The hybrid-driven underwater gliders can realize variable motion profiles by their own buoyancy-driven and propeller propulsion systems. Stability of the mechanical system determines the performance of the system. In this paper, the Petrel-II hybrid-driven underwater glider developed by Tianjin University is selected as the research object and the stability of hybrid-driven underwater glider unitedly controlled by buoyancy and propeller has been targeted and evidenced. The dimensionless equations of the hybrid-driven underwater glider are obtained when the propeller is working. Then, the steady speed and steady glide path angle under steady-state motion have also been achieved. The steady-state operating conditions can be calculated when the hybrid-driven underwater glider reaches the desired steady-state motion. And the steady- state operating conditions are relatively conservative at the lower bound of the velocity range compared with the range of the velocity derived from the method of the composite Lyapunov function. By calculating the hydrodynamic coefficients of the Petrel-II hybrid-driven underwater glider, the simulation analysis has been conducted. In addition, the results of the field trials conducted in the South China Sea and the Danjiangkou Reservoir of China have been presented to illustrate the validity of the analysis and simulations.and to show the feasibility of the method of the composite Lyapunov function which verifies the stability of the Petrel-II hybrid-driven underwater glider.
文摘Different from conventional mechanical systems with single degree of freedom (DOF), the main idea of the system of hybrid-driven precision press is to combine the motion of a constant speed motor with a servomotor via a two-DOF mechanism to provide flexible output. In order to make the feasibility clear, this paper studies theoretically the dynamic characteristics of this hybrid-driven mechanical system.Firstly,the dynamics model of the whole electromechanical system is set up by combining dynamic equations of DC motors with those of two-DOF nine-bar mechanism deduced by the Lagrange′s formula. Secondly through the numerical solution with the fourth Runge-Kutta, computer simulation about the dynamics is done, which shows that the designed and optimized hybrid-driven precision press is feasible in theory. These provide theoretical basis for later experimental research.
基金supported by National Innovation Training Project(201710959044)Anhui Province Quality Engineering Project(2016jyxm0336)Anhui Province Educational Department University Natural Science Research Project(KJ2017A523)
文摘The concept of virtual slider crank mechanism is proposed and decoupled to obtain parameters of controllable five bar mechanism without any principle error for any given trajectory. The model is simple and easy to solve. This method has no convergence,flexible workspace and singularity of the mechanism problem. Through this method,we don’ t need any curve to fit the trajectory point. Using MATLAB program to calculate,the computation time can be reduced to less than 3% of the original. Finally,an example is given to illustrate the method which is meanwhile compared with the traditional five bar design method.
文摘为有效提升配电网韧性,提出了一种基于数据-模型混合驱动的多类型移动应急资源优化调度方法。首先,考虑到交通道路状态动态变化对移动储能车(mobile energy storage system,MESS)和应急抢修队(repair crew,RC)策略的影响,构建了以电力-交通耦合网总损失成本最小为目标的多类型移动应急资源随机优化调度模型。然后,为了实时准确地求解MESS和RC最优路由和调度策略,提出了一种数据-模型混合驱动方法对所构建的复杂非线性随机优化模型进行求解。在数据驱动部分提出一种图注意力网络多智能体强化学习算法,以求解考虑交通网道路修复时间和移动应急资源邻接关系动态变化等不确定因素的MESS和RC最优路由策略。所提算法有效结合多种改进策略和优先经验回放策略以提高算法的采样效率和训练效果。在模型驱动部分采用二阶锥松弛和大M法将多类型移动应急资源优化调度问题构建为混合整数二阶锥规划模型以求解可再生能源出力和配电网负荷变化影响下MESS和RC最优调度策略。最后,在2个不同规模的电力-交通耦合网中验证所提方法的有效性、泛化能力和可拓展能力。
基金The research work was financially supported by the National Natural Science Foundation of China(Grant No.51775512,51975536)Key research projects of Zhejiang Province(Grant No.2018C02046)+2 种基金Project funded by China Postdoctoral Science FoundationBasic public welfare research projects of Zhejiang Province(Grant No.LGN19E050002,LGN20E050006)Basic Scientific Research Foundation of Zhejiang Sci-Tech University.
文摘Aiming at decreasing the component complexity and cost of flower transplanting machine,an integrated transplanting method for picking and planting flower seedlings was proposed,and a hybrid-driven five-bar parallel mechanism was designed.A“beak-shaped”trajectory was designed for integrated transplanting requirements,and meantime,either the posture requirements of transplanting claw were determined.Based on the transplanting trajectory of the mechanism,a corresponding mathematical model for solving the link parameters was established,and then the five-bar mechanism was divided into two bar groups,optimization was conducted in two steps based on genetic algorithm and NSGA-II algorithm.Consequently,the optimal solution of the hybrid-driven five-bar parallel mechanism for flower seedling transplanting was obtained.Compared with similar designs,the trajectory displacement of the proposed mechanism is larger in the condition of smaller link size,which indicates that the mechanism can effectively decrease the machine size.The real-time controllable motor angular acceleration fluctuation is smaller and the commutation times are less,which has the advantage of reducing the difficulty of the mechanism control system.Subsequently,the correctness of the design method is verified by kinematics simulation.Finally,the synchronous linkage motion control methods of the two motors were designed,a transplanting experiment of the prototype was carried out,the picking success rate had reached 90%-93.4%and transplanting success rate was 80.5%-86.9%during experiment,which showed that the integrated operation of picking and planting flower seedlings can be realized by the proposed mechanism.
基金the National Key R&D Program of China(Grant No.2016YFC0301101)the National Natural Science Foundation of China(Grant No.51721003)+1 种基金the Natural Science Foundation of Tianjin City(Grant No.18JCJQJC46400)the Aoshan Talent Cultivation Program of QNLM(Grant Nos.2017ASTCP-OS05 and 2017ASTCP-OE01)。
文摘Hybrid-driven technology,which can improve the sailing performance of underwater gliders(UGs),has been successfully used in ocean observation.However,a hybrid-driven UG(HUG)with an added tail propeller is still unable to achieve backward and turning motion with a body length radius,and the hydrodynamic pitch moment acting on the HUG that is mainly caused by the fixed-wing makes it difficult to achieve high-precision attitude control during fixed-depth navigation.To solve this problem,a two-degree-of-freedom bioinspired controllable wing mechanism(CWM)is proposed to improve the maneuverability and cruising ability of HUGs.The CWM can realize five motion modes:modifying the dihedral angle or anhedral angle,changing the frontal area of the wing,switching the wing from horizontal to be a vertical rudder,flapping the wing as propulsion,and rotating the wing as a vector propeller.First,the design process of the CWM is provided,and hydrodynamic forces in each motion mode of three CWMs with different trailing edge sweepback angles(TESA)and attitude angles are analyzed through computational fluid dynamics simulation.The relationship between hydrodynamics and the attitude angles or TESA of the CWM is analyzed.Then,experiments are conducted to measure the hydrodynamics of the CWM when it is in a flapping wing mode and rotating the wing as a vector propeller,respectively.The hydrodynamic forces obtained from the simulation are consistent with data measured by a force sensor,proving the credibility of the simulated hydrodynamics.Subsequently,by applying the results of the hydrodynamic force in this study,the flapping trajectory of the wingtip is planned using the cubic spline interpolation method.Furthermore,two underwater demo vehicles with a pair of CWMs are developed,and experiments are conducted in a water tank,further validating and demonstrating the feasibility of the proposed CWM.
基金supported by the National Natural Science Foundation of China(Grant Nos.U24B20133 and 62522104)the Beijing Nova Program(Grant No.20230484331).
文摘An efficient neural mode-solving operator is proposed for evaluating the propagation properties of optical fibers.By incorporating the governing Helmholtz equation into training,the working mechanism of the proposed operator adheres to the physics essence of fiber analysis.The training of the mode-solving operator adopts a hybrid physics-informed and data-driven approach,providing the advantages of strong physical consistency,enhanced prediction accuracy,and reduced data dependency in comparison with purely datadriven methods.Benefiting from the improvements in network input-output mapping formulation,the proposed operator offers broader applicability to different fiber types and greater flexibility for property optimization.Combined with the particle swarm optimization and refractive index optimization,the operator demonstrates its capacity for the inverse design of multi-step-index fibers(MSIFs)and graded-index fibers(GRIFs).For MSIFs,to ensure a low mode crosstalk for short-distance transmission systems,optimized refractive index profiles(RIPs)of both three-ring and four-ring structures are obtained from large structure parameter search spaces.For GRIFs,to ensure a low receiving complexity for long-haul transmission systems,optimized RIP with low root mean square mode group delay is obtained through point-wise fine-tuning.Moreover,the operator is capable of analyzing the effect of dopant diffusion in manufacturing.
