The diagnostic efficacy of contemporary bioimaging technologies remains constrained by inherent limitations of conventional imaging agents,including suboptimal sensitivity,off-target biodistribution,and inherent cytot...The diagnostic efficacy of contemporary bioimaging technologies remains constrained by inherent limitations of conventional imaging agents,including suboptimal sensitivity,off-target biodistribution,and inherent cytotoxicity.These limitations have catalyzed the development of intelligent stimuli-responsive block copolymers-based bioimaging agents,which was engineered to dynamically respond to endogenous biochemical cues(e.g.,p H gradients,redox potential,enzyme activity,hypoxia environment) or exogenous physical triggers(e.g.,photoirradiation,thermal gradients,ultrasound(US)/magnetic stimuli).Through spatiotemporally controlled structural transformations,stimuli-responsive block copolymers enable precise contrast targeting,activatable signal amplification,and theranostic integration,thereby substantially enhancing signal-to-noise ratios of bioimaging and diagnostic specificity.Hence,this mini-review systematically examines molecular engineering principles for designing p H-,redox-,enzyme-,light-,thermo-,and US/magnetic-responsive polymers,with emphasis on structure-property relationships governing imaging performance modulation.Furthermore,we critically analyze emerging strategies for optical imaging,US synergies,and magnetic resonance imaging(MRI).Multimodal bioimaging has also been elaborated,which could overcome the inherent trade-offs between resolution,penetration depth,and functional specificity in single-modal approaches.By elucidating mechanistic insights and translational challenges,this mini-review aims to establish a design framework of stimuli-responsive block copolymersbased for high fidelity bioimaging agents and accelerate their clinical translation in precise diagnosis and therapy.展开更多
Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford prod...Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_2 ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.展开更多
Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphi...Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphite.This study utilizes the porous“defect advantage”of a cathode carbon block matrix to prepare silicon-doped and asphalt-coated detoxified and purified waste graphitization cathode carbon blocks for use as high-performance silicon/carbon composite anode materials.The results show that the uniformly silicondoped silicon/carbon composite material features a unique amorphous carbon-encapsulated“locked silicon”structure,which effectively addresses issues such as cathode volume expansion,excessive growth of the solid electrolyte interphase(SEI)film,and poor electrical contact between active materials.Consequently,electrochemical performance is enhanced.After assembly in a half-cell,the PSCC/10%Si@C(purified waste graphitization cathode carbon/10%Si@C)material exhibits optimal electrochemical stability,with an initial charging specific capacity of 514.5 mAh/g at 0.1 C(1 C=170 mA/g)and a capacity retention rate of 95.1%after 100 cycles.At a charge rate of 2.0 C,a specific capacity of 216.9 mAh/g is achieved.This technology provides a new pathway for the economical and high-value utilization of waste cathode carbon blocks and the development of low-cost,high-performance anode materials.展开更多
12 vol%WCp/2024Al composite was fabricated from mixed powders by hot-pressing at various tempera-tures. Investigation of the interfacial reaction between the WC phase and the Al alloy matrix was performed by X-ray dif...12 vol%WCp/2024Al composite was fabricated from mixed powders by hot-pressing at various tempera-tures. Investigation of the interfacial reaction between the WC phase and the Al alloy matrix was performed by X-ray diffraction （XRD）, transmission electron microscope （TEM） and energy dispersive spectroscopy （EDS）. A multiple layer interface structure, which is composed of Al/ WAl12/AlnC3/WC, is found to form by the interfacial reaction during hot-pressing. Further study shows that the AlaC3 layer forms along with a given crystal orientation of WC phase and might retard the interfacial reaction process.展开更多
Synthesis and ion transport properties of hot-pressed solid polymer electrolytes （SPEs）, （l-x） PEO： x KI, where x is the content of KI in wt%, are reported. A hot-press technique has been used for the formation o...Synthesis and ion transport properties of hot-pressed solid polymer electrolytes （SPEs）, （l-x） PEO： x KI, where x is the content of KI in wt%, are reported. A hot-press technique has been used for the formation of the polymeric membranes in place of the usual solution cast method. The composition （80 PEO：20 KI） was identified as the highest conducting polymer electrolyte on the basis of compositional dependent conductivity studies of PEO：KI films. A conductivity enhancement of more than two orders of magnitude from that of the pure PEO was achieved. Materials characterization and ion transport mechanism were explained by using various experimental techniques.展开更多
Alumina-(0 similar to 20 vol. pct) iron composites were fabricated by hot-pressing of well-mixed-alumina and iron powders at 1400 degreesC and 30 MPa for 30 min. Hot-pressed bodies with nearly theoretical density were...Alumina-(0 similar to 20 vol. pct) iron composites were fabricated by hot-pressing of well-mixed-alumina and iron powders at 1400 degreesC and 30 MPa for 30 min. Hot-pressed bodies with nearly theoretical density were obtained for addition up to 10 vol. pct Fe, but relative density decreased gradually with further increase in Fe addition. The materials exhibit a homogeneous dispersion of Fe. Fracture strength of the composites exhibits a maximum value of 604 MPa at 15 vol. pct Fe, which is 1.5 times that of alumina alone. Fracture toughness increases with the increase in Fe content, reaching 7.5 MPa.m(1/2) at 20 vol. pct Fe. The theoretical values of fracture toughness was calculated and compared with the experimental one. Toughening mechanisms of the composites are also discussed.展开更多
A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution treated.The hot-pressed sintered and solution treated materials were rolled and aged.The precipitation behav...A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution treated.The hot-pressed sintered and solution treated materials were rolled and aged.The precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron microscopy.In contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe composite.The Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 K.Mechanisms for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were analyzed.These findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.展开更多
The three-layered(W-60 vol%Cu/W-40 vol%Cu/W-20 vol%Cu)W/Cu functionally graded material(FGM)containing a Cu network structure was fabricated at different temperatures by hot-pressed sintering produced from copper-coat...The three-layered(W-60 vol%Cu/W-40 vol%Cu/W-20 vol%Cu)W/Cu functionally graded material(FGM)containing a Cu network structure was fabricated at different temperatures by hot-pressed sintering produced from copper-coated tungsten powders.The effects of various sintering temperatures on relative density,microstructure,thermal conductivity,hardness and flexural strength were investigated.Scanning electron microscopy(SEM)and X-ray diffraction(XRD)analysis show that a Cu network extends throughout the W/Cu FGM specimens sintered at 1065℃and the graded structure can be retained perfectly,and W particles are distributed homogeneously.The low-temperature sintering densification of W/Cu FGM arises because the sintering mode of the copper-coated tungsten particles includes just sintering Cu to Cu,rather than Cu to W,Cu to Cu and W to W,as required for conventional powder particles.The relative density of W/Cu FGM sintered at 1065℃for 3 h under a load of25 MPa is 96.1%.The thermal conductivity is up to204 W·m^-1·K^-1 at normal temperature and 150 W·m^-1·K^-1at 800℃.And the Vickers hardness varies with the gradient of different layers from 3.34 to 4.05 GPa.展开更多
针对传统硬件描述语言(Verilog/VHDL)实现密码算法时代码复杂性高、开发周期长且调试困难等问题,本文提出了一种基于Chisel语言的轻量级分组密码算法LBlock的硬件实现方案。利用Chisel的高级硬件构建能力,通过模块化设计和有限状态机控...针对传统硬件描述语言(Verilog/VHDL)实现密码算法时代码复杂性高、开发周期长且调试困难等问题,本文提出了一种基于Chisel语言的轻量级分组密码算法LBlock的硬件实现方案。利用Chisel的高级硬件构建能力,通过模块化设计和有限状态机控制,高效地实现了密钥扩展、加密和解密核心模块。通过在Xilinx ISE Design Suite 14.7上综合后,结果表明,基于Chisel的LBlock算法实现方案在逻辑资源消耗和工作频率上均表现出优势。最高工作频率达到250.197MHz,加密吞吐率为485.815 Mbps,与传统的Verilog实现相比,本设计在显著降低代码量的同时,吞吐率提升了55.7%,为资源受限环境下的密码硬件实现提供了一种更敏捷、高效的设计思路。展开更多
Densification, phase transformation and fracture toughness were studied in hot-pressed Si_3N_4 seeded by in-houseproduced large, elongated β-Si_3N_4 seeds. A mixture of Y_2O_3-Al_2O_3 was used as the sintering aid. C...Densification, phase transformation and fracture toughness were studied in hot-pressed Si_3N_4 seeded by in-houseproduced large, elongated β-Si_3N_4 seeds. A mixture of Y_2O_3-Al_2O_3 was used as the sintering aid. Concentration ofseeds were varied from 0 to 6 wt pct and the sintering time at 1700℃ was varied from 1 to 4 h. Maximum fracturetoughness of 9.0 MPam^(1/2) was measured in samples containing 5 wt pct seeds, hot pressed at 1700℃ for 4 h.展开更多
Arsenic materials have attracted great attention due to their unique properties.However,research concerning iron-arsenic(Fe-As) alloys is very scarce due to the volatility of As at low temperature and the high melting...Arsenic materials have attracted great attention due to their unique properties.However,research concerning iron-arsenic(Fe-As) alloys is very scarce due to the volatility of As at low temperature and the high melting point of Fe.Herein,a new Fe-As alloy was obtained by mechanical alloying(MA) followed by vacuum hot-pressed sintering(VHPS).Moreover,a systematic study was carried out on the microstructural evolution,phase composition,leaching toxicity of As,and physical and mechanical properties of Fe-As alloys with varying weight fractions of As(20%,25%,30%,35%,45%,55%,65%,and 75%).The results showed that pre-alloyed metallic powders(PAMPs) have a fine grain size and specific supersaturated solid solution after MA,which could effectively improve the mechanical properties of Fe-As alloys by VHPS.A high density(> 7.350 g·cm^(-3)),low toxicity,and excellent mechanical properties could be obtained for FeAs alloys sintered via VHPS by adding an appropriate amount of As,which is more valuable than commercial Fe-As products.The Fe-25% As alloy with low toxicity and a relatively high density(7.635 g·cm^(-3)) provides an ultra-high compressive strength(1989.19 MPa),while the Fe-65% As alloy owns the maximum Vickers hardness(HVo.5 899.41).After leaching by the toxicity characteristic leaching procedure(TCLP),these alloys could still maintain good mechanical performance,and the strengthening mechanisms of Fe-As alloys before and after leaching were clarified.Changes in the grain size,micro structure,and phase distribution induced significant differences in the compressive strength and hardness.展开更多
Multiple instances of the Late Cretaceous granodiorites within the Anglonggangri region of the northwestern Lhasa Block were identified,their petrogenesis were explored and mineralization potential were assessed.The z...Multiple instances of the Late Cretaceous granodiorites within the Anglonggangri region of the northwestern Lhasa Block were identified,their petrogenesis were explored and mineralization potential were assessed.The zircon U-Pb dating of the Anglonggangri granodiorites revealed ages of 82.8 and 80.8 Ma.Granodiorite samples have SiO2 contents of 64.36-68.33 wt%,with high Sr/Y(55-95)and A/CNK ratios(0.99-1.06).Zirconε_(Hf)(t)values range from−0.3 to+16.2.Two granodiorite samples have(^(87)Sr/^(86)Sr)i values of 0.7034 and 0.7043 and positiveɛNd(t)values of 3.51 and 3.83.These geochemical properties indicate that they are adakitic rocks formed by partial melting of the juvenile thickened lower crust,slightly contaminated with material from the mantle due to the small-scale delamination of the lower crust.The zircons in the granodiorites have moderate Ce/Nd(2.5-43),logfO2(−20.0 to−9.6),andΔFMQ(−1.28 to+4.00)values;low(Ce/Nd)/Y(0.001-0.049)ratios;and high Dy/Yb(0.17-1.16)ratios,which indicate that these granodiorites exhibit moderate oxygen fugacity and lower magma water content than the Miocene Gangdese porphyry copper deposits associated with high-Sr/Y granites.Their ability to create porphyry-type copper deposits could have been hampered by their low magma water content and moderate oxygen fugacity.展开更多
基金supported by the National Natural Science Foundation of China (Nos.22208218,22078196,and 22278268)the Natural Science Foundation of Shanghai (No.22ZR1460400)Collaborative Innovation Center of Fragrance Flavour and Cosmetics,and Collaborative Innovation Project of Shanghai Institute of Technology (No.XTCX2023-07)。
文摘The diagnostic efficacy of contemporary bioimaging technologies remains constrained by inherent limitations of conventional imaging agents,including suboptimal sensitivity,off-target biodistribution,and inherent cytotoxicity.These limitations have catalyzed the development of intelligent stimuli-responsive block copolymers-based bioimaging agents,which was engineered to dynamically respond to endogenous biochemical cues(e.g.,p H gradients,redox potential,enzyme activity,hypoxia environment) or exogenous physical triggers(e.g.,photoirradiation,thermal gradients,ultrasound(US)/magnetic stimuli).Through spatiotemporally controlled structural transformations,stimuli-responsive block copolymers enable precise contrast targeting,activatable signal amplification,and theranostic integration,thereby substantially enhancing signal-to-noise ratios of bioimaging and diagnostic specificity.Hence,this mini-review systematically examines molecular engineering principles for designing p H-,redox-,enzyme-,light-,thermo-,and US/magnetic-responsive polymers,with emphasis on structure-property relationships governing imaging performance modulation.Furthermore,we critically analyze emerging strategies for optical imaging,US synergies,and magnetic resonance imaging(MRI).Multimodal bioimaging has also been elaborated,which could overcome the inherent trade-offs between resolution,penetration depth,and functional specificity in single-modal approaches.By elucidating mechanistic insights and translational challenges,this mini-review aims to establish a design framework of stimuli-responsive block copolymersbased for high fidelity bioimaging agents and accelerate their clinical translation in precise diagnosis and therapy.
基金financially supported by National Key R&D Program Young Scientists Project(No.2023YFC3903100)the National Natural Science Foundation of China(No.22322503)analytical and testing assistance from the Analysis and Testing Center of HUST。
文摘Switchable polymerization is emerging as a powerful tool to construct block copolymers directly from mixtures of monomers.However,current achievements typically iterate between two polymerization cycles to afford products with fixed sequences and compositions.Herein,we report the triethylborane/1,8-diazabicyclo[5.4.0]undec-7-ene(Et_3B/DBU)pair-mediated four-component switchable polymerization of propylene oxide(PO),CO_(2),phthalic anhydride(PA),and racemic lactide(rac-LA),which enables the on-demand synthesis of four different block copolymers,i.e.,poly(propylene phthalate)-b-polylactide(PPE-b-PLA),PPE-b-PLA-b-poly(propylene carbonate)(PPC),PPE-b-PPC-b-PLA,and PPE-b-PPCb-poly(propylene oxide)(PPO),through rationally modulating the Lewis pair(LP)ratio.Core to this protocol is that increasing the loading of Et_(3)B accelerates the ring-opening of PO while impeding the reactivity of rac-LA,thus allowing for fine-tuning of the thermodynamic and kinetic of the switchable polymerization.Therefore,the four polymerization cycles involving PO/PA ring-opening copolymerization(ROCOP),PO/CO_2 ROCOP,rac-LA ring-opening polymerization(ROP),and PO ROP can be connected and discriminated in precisely programmed manners.
基金supported by the National Natural Science Foundation of China(No.52274346).
文摘Waste graphitization cathode carbon blocks are a type of hazardous solid waste generated during the aluminum electrolysis process,and their proper disposal is a key step in the resource utilization of discarded graphite.This study utilizes the porous“defect advantage”of a cathode carbon block matrix to prepare silicon-doped and asphalt-coated detoxified and purified waste graphitization cathode carbon blocks for use as high-performance silicon/carbon composite anode materials.The results show that the uniformly silicondoped silicon/carbon composite material features a unique amorphous carbon-encapsulated“locked silicon”structure,which effectively addresses issues such as cathode volume expansion,excessive growth of the solid electrolyte interphase(SEI)film,and poor electrical contact between active materials.Consequently,electrochemical performance is enhanced.After assembly in a half-cell,the PSCC/10%Si@C(purified waste graphitization cathode carbon/10%Si@C)material exhibits optimal electrochemical stability,with an initial charging specific capacity of 514.5 mAh/g at 0.1 C(1 C=170 mA/g)and a capacity retention rate of 95.1%after 100 cycles.At a charge rate of 2.0 C,a specific capacity of 216.9 mAh/g is achieved.This technology provides a new pathway for the economical and high-value utilization of waste cathode carbon blocks and the development of low-cost,high-performance anode materials.
基金financially supported by the Program for Changjiang Scholars and Innovative Research Teams in University(PCSIRT)(No.IRT0713)
文摘12 vol%WCp/2024Al composite was fabricated from mixed powders by hot-pressing at various tempera-tures. Investigation of the interfacial reaction between the WC phase and the Al alloy matrix was performed by X-ray diffraction （XRD）, transmission electron microscope （TEM） and energy dispersive spectroscopy （EDS）. A multiple layer interface structure, which is composed of Al/ WAl12/AlnC3/WC, is found to form by the interfacial reaction during hot-pressing. Further study shows that the AlaC3 layer forms along with a given crystal orientation of WC phase and might retard the interfacial reaction process.
基金financially supported by DST, New Delhi through the ‘Fast Track Young Scientist Research Project’(No. SR/FTP/PS-23/2009)
文摘Synthesis and ion transport properties of hot-pressed solid polymer electrolytes （SPEs）, （l-x） PEO： x KI, where x is the content of KI in wt%, are reported. A hot-press technique has been used for the formation of the polymeric membranes in place of the usual solution cast method. The composition （80 PEO：20 KI） was identified as the highest conducting polymer electrolyte on the basis of compositional dependent conductivity studies of PEO：KI films. A conductivity enhancement of more than two orders of magnitude from that of the pure PEO was achieved. Materials characterization and ion transport mechanism were explained by using various experimental techniques.
文摘Alumina-(0 similar to 20 vol. pct) iron composites were fabricated by hot-pressing of well-mixed-alumina and iron powders at 1400 degreesC and 30 MPa for 30 min. Hot-pressed bodies with nearly theoretical density were obtained for addition up to 10 vol. pct Fe, but relative density decreased gradually with further increase in Fe addition. The materials exhibit a homogeneous dispersion of Fe. Fracture strength of the composites exhibits a maximum value of 604 MPa at 15 vol. pct Fe, which is 1.5 times that of alumina alone. Fracture toughness increases with the increase in Fe content, reaching 7.5 MPa.m(1/2) at 20 vol. pct Fe. The theoretical values of fracture toughness was calculated and compared with the experimental one. Toughening mechanisms of the composites are also discussed.
基金This work was supported by the National Natural Science Foundation of China(Grant No.52101181).
文摘A Cu-10wt%Fe composite was prepared through hot-pressed sintering,and the material was subsequently solution treated.The hot-pressed sintered and solution treated materials were rolled and aged.The precipitation behavior and performance changes were systematically studied by using scanning electron microscopy and transmission electron microscopy.In contrast to the hot-pressed sintered specimen,the solution treatment significantly affects the thermal stability and properties of the Cu-10wt%Fe composite.The Cu-10wt%Fe composite was prepared after solid solution,cold rolling and aging at 773 K for 1 h,and it obtained excellent tensile strength of 494 MPa,uniform elongation of 16.3%,electrical conductivity of 51.1%IACS and softening temperature of 838 K.Mechanisms for the distinct difference in thermal stability and properties between hot-pressed sintered and solution treated specimens were analyzed.These findings provide a theoretical basis for designing high-performance Cu-based in-situ composites by post treatment.
基金financially supported by the Wenzhou Public Welfare Technology Research Industry Project(No.G20140042)。
文摘The three-layered(W-60 vol%Cu/W-40 vol%Cu/W-20 vol%Cu)W/Cu functionally graded material(FGM)containing a Cu network structure was fabricated at different temperatures by hot-pressed sintering produced from copper-coated tungsten powders.The effects of various sintering temperatures on relative density,microstructure,thermal conductivity,hardness and flexural strength were investigated.Scanning electron microscopy(SEM)and X-ray diffraction(XRD)analysis show that a Cu network extends throughout the W/Cu FGM specimens sintered at 1065℃and the graded structure can be retained perfectly,and W particles are distributed homogeneously.The low-temperature sintering densification of W/Cu FGM arises because the sintering mode of the copper-coated tungsten particles includes just sintering Cu to Cu,rather than Cu to W,Cu to Cu and W to W,as required for conventional powder particles.The relative density of W/Cu FGM sintered at 1065℃for 3 h under a load of25 MPa is 96.1%.The thermal conductivity is up to204 W·m^-1·K^-1 at normal temperature and 150 W·m^-1·K^-1at 800℃.And the Vickers hardness varies with the gradient of different layers from 3.34 to 4.05 GPa.
文摘针对传统硬件描述语言(Verilog/VHDL)实现密码算法时代码复杂性高、开发周期长且调试困难等问题,本文提出了一种基于Chisel语言的轻量级分组密码算法LBlock的硬件实现方案。利用Chisel的高级硬件构建能力,通过模块化设计和有限状态机控制,高效地实现了密钥扩展、加密和解密核心模块。通过在Xilinx ISE Design Suite 14.7上综合后,结果表明,基于Chisel的LBlock算法实现方案在逻辑资源消耗和工作频率上均表现出优势。最高工作频率达到250.197MHz,加密吞吐率为485.815 Mbps,与传统的Verilog实现相比,本设计在显著降低代码量的同时,吞吐率提升了55.7%,为资源受限环境下的密码硬件实现提供了一种更敏捷、高效的设计思路。
文摘Densification, phase transformation and fracture toughness were studied in hot-pressed Si_3N_4 seeded by in-houseproduced large, elongated β-Si_3N_4 seeds. A mixture of Y_2O_3-Al_2O_3 was used as the sintering aid. Concentration ofseeds were varied from 0 to 6 wt pct and the sintering time at 1700℃ was varied from 1 to 4 h. Maximum fracturetoughness of 9.0 MPam^(1/2) was measured in samples containing 5 wt pct seeds, hot pressed at 1700℃ for 4 h.
基金financially supported by the National Natural Science Foundation of China (No.52104406)the Natural Science Foundation of Hunan Province (No.2022JJ20074)+1 种基金the Foundation for Innovative Research Groups of the National Natural Science Foundation of China (No.52121004)the National Natural Science Foundation of China for Distinguished Young Scholars (No.51825403)。
文摘Arsenic materials have attracted great attention due to their unique properties.However,research concerning iron-arsenic(Fe-As) alloys is very scarce due to the volatility of As at low temperature and the high melting point of Fe.Herein,a new Fe-As alloy was obtained by mechanical alloying(MA) followed by vacuum hot-pressed sintering(VHPS).Moreover,a systematic study was carried out on the microstructural evolution,phase composition,leaching toxicity of As,and physical and mechanical properties of Fe-As alloys with varying weight fractions of As(20%,25%,30%,35%,45%,55%,65%,and 75%).The results showed that pre-alloyed metallic powders(PAMPs) have a fine grain size and specific supersaturated solid solution after MA,which could effectively improve the mechanical properties of Fe-As alloys by VHPS.A high density(> 7.350 g·cm^(-3)),low toxicity,and excellent mechanical properties could be obtained for FeAs alloys sintered via VHPS by adding an appropriate amount of As,which is more valuable than commercial Fe-As products.The Fe-25% As alloy with low toxicity and a relatively high density(7.635 g·cm^(-3)) provides an ultra-high compressive strength(1989.19 MPa),while the Fe-65% As alloy owns the maximum Vickers hardness(HVo.5 899.41).After leaching by the toxicity characteristic leaching procedure(TCLP),these alloys could still maintain good mechanical performance,and the strengthening mechanisms of Fe-As alloys before and after leaching were clarified.Changes in the grain size,micro structure,and phase distribution induced significant differences in the compressive strength and hardness.
基金jointly supported by the National Key Research&Development Program of China(2021YFC2900100)the Basic Research Fund of the Chinese Academy of Geological Sciences(KK2306)+1 种基金the Geological Survey Project(DD20230360,DD20243483)the Sichuan Provincial Natural Science Foundation(2023NSFSC0798).
文摘Multiple instances of the Late Cretaceous granodiorites within the Anglonggangri region of the northwestern Lhasa Block were identified,their petrogenesis were explored and mineralization potential were assessed.The zircon U-Pb dating of the Anglonggangri granodiorites revealed ages of 82.8 and 80.8 Ma.Granodiorite samples have SiO2 contents of 64.36-68.33 wt%,with high Sr/Y(55-95)and A/CNK ratios(0.99-1.06).Zirconε_(Hf)(t)values range from−0.3 to+16.2.Two granodiorite samples have(^(87)Sr/^(86)Sr)i values of 0.7034 and 0.7043 and positiveɛNd(t)values of 3.51 and 3.83.These geochemical properties indicate that they are adakitic rocks formed by partial melting of the juvenile thickened lower crust,slightly contaminated with material from the mantle due to the small-scale delamination of the lower crust.The zircons in the granodiorites have moderate Ce/Nd(2.5-43),logfO2(−20.0 to−9.6),andΔFMQ(−1.28 to+4.00)values;low(Ce/Nd)/Y(0.001-0.049)ratios;and high Dy/Yb(0.17-1.16)ratios,which indicate that these granodiorites exhibit moderate oxygen fugacity and lower magma water content than the Miocene Gangdese porphyry copper deposits associated with high-Sr/Y granites.Their ability to create porphyry-type copper deposits could have been hampered by their low magma water content and moderate oxygen fugacity.
