Identifying geohazards such as landslides and methane leakage is crucial during gas extraction from natural gas hydrate(NGH)reservoirs,and understanding reservoir settlement behavior is central to this assessment.Hori...Identifying geohazards such as landslides and methane leakage is crucial during gas extraction from natural gas hydrate(NGH)reservoirs,and understanding reservoir settlement behavior is central to this assessment.Horizontal wells can enlarge the pressure relief zone within the formation,improving single-well productivity,and are therefore considered a promising approach for NGH development.This study examines the settlement response of hydrate-bearing sediments during depressurization using horizontal wells.A fully coupled thermal,hydraulic,mechanical,and chemical(THMC)model with representative reservoir properties(Shenhu region in the South China Sea)is presented accordingly.The simulations show that lower production pressures,while increasing gas output,also intensify formation settlement.The maximum difference in settlement between the lowest and highest production pressures reaches 0.016 m,contributing to more pronounced differential subsidence.Optimal well placement,specifically targeting a low-saturation hydrate zone containing free gas and situated adjacent to a high-saturation hydrate layer,markedly improves both gas production rate and cumulative yield,while reducing overall settlement and limiting changes in effective stress.展开更多
Dear Editor,Dorsal pontine lesions may cause a variety of complex neuro-ophthalmic deficits,including horizontal gaze palsy(HGP),internuclear ophthalmoplegia,one-and-ahalf syndrome,abducens nerve palsy,skew deviation,...Dear Editor,Dorsal pontine lesions may cause a variety of complex neuro-ophthalmic deficits,including horizontal gaze palsy(HGP),internuclear ophthalmoplegia,one-and-ahalf syndrome,abducens nerve palsy,skew deviation,or any combination of these.Here we present a rare case of an adult patient who developed multiple complicated clinical manifestations after surgical removal of a pontine cavernous hemangioma(PCH).Our case highlights a single pontine lesion may involve complicated neural pathways and result in complicated symptoms and signs,in which abducens nerve palsy or skew deviation is easily missed when combined with HGP.展开更多
Significant differences exist between deep and medium-shallow coalbed methane(CBM)reservoirs.The unclear understanding of flowback and production behavior severely constrains the development of deep CBM resources.To a...Significant differences exist between deep and medium-shallow coalbed methane(CBM)reservoirs.The unclear understanding of flowback and production behavior severely constrains the development of deep CBM resources.To address this challenge,guided by the gas-liquid two-phase flow theory in ultra-low permeability reservoirs,and integrating theoretical analysis,numerical simulation,and insights from production practices,this study classifies the flowback and production stages of deep CBM well considering the Daning-Jixian Block,Eastern Ordos Basin as a representative case.We summarize the flowback characteristics for each stage and establish a standard flowback production type curve,aiming to guide field operations.The results indicate that:(a)The production process of deep CBM horizontal wells can be divided into five distinct stages:initial single-phase water dewatering stage,initial gas appearance to peak water production stage,gas breakthrough to peak gas production stage,stable production and decline stage,and low-rate production stage.(b)Based on reservoir energy,two standard type curves for horizontal well flowback production are established:the‘Sufficient Reservoir Energy’type and the‘Insufficient Reservoir Energy’type.The former achieves a higher initial gas rate(up to 12×10^(4)m^(3)/d)but exhibits poorer stability,while the latter achieves a lower stable rate(up to 8×10^(4)m^(3)/d)but demonstrates stronger stability.Numerical simulation confirms these behavioral patterns and reveals the underlying mechanisms related to the effectively drained area where pressure is significantly depleted.The findings from this study have guided the flowback production operations in 53 deep CBM wells with positive results,demonstrating high potential for broad application.展开更多
The current inertial measurement unit(IMU)and odometry fusion navigation algorithms often incorporate non-holonomic constraints(NHC)to obtain three-dimensional velocity in the navigation frame.However,due to the integ...The current inertial measurement unit(IMU)and odometry fusion navigation algorithms often incorporate non-holonomic constraints(NHC)to obtain three-dimensional velocity in the navigation frame.However,due to the integral nature of the dead reckoning algorithm,the attitude errors of the IMU accumulate over time,causing the velocity transformation results to fail to accurately reflect the threedimensional velocity in the navigation frame.Based on the fact that during a vehicle??s horizontal and uniform motion,the vertical acceleration is consistent with gravitational acceleration,this paper proposes an IMU/odometry fusion navigation algorithm based on horizontal attitude constraints(HAC).Building on non-holonomic constraints,this algorithm determines the motion state of the vehicle through accelerometer output and zeroes out the pitch and roll angles during horizontal and uniform motion.Verified through two sets of real-world vehicle test data,this algorithm improves horizontal positioning accuracy by approximately 63%and 70%,and vertical positioning accuracy by 98%and 97%,compared with the traditional NHC IMU/odometer fusion algorithm.展开更多
With the continuous development of the offshore wind industry,the design concept of composite foundation has been given attention in the past decade.This paper presents an accurate method for investigating the horizon...With the continuous development of the offshore wind industry,the design concept of composite foundation has been given attention in the past decade.This paper presents an accurate method for investigating the horizontal vibration of monopile-friction wheel composite foundations in layered saturated soil.Firstly,the three-dimensional continuum mechanics theory with the range of linear elasticity is introduced to calculate the frictional resistance distributed on the upper soil surface.Then,the resistances of multilayered soils and inviscid seawater to the pile shaft under horizontal harmonic excitation are obtained using Novak's plane strain model,Biot's porous media theory and radiationwave theory.Thirdly,the expressions for the deformation,bending moment and internal force of the Euler-Bernoulli pile are derived using the boundary conditions with definitephysical meaning and transfer matrix method.By comparing with the results of 1g laboratory test and the idealized formula reported by the literature,the rationality and accuracy of the developed dynamical model can be verified.Finally,this paper conducts a series of worked examples to investigate the influencesof the elastic modulus and thickness of three-layer saturated soil and the location of interlayer soil on the horizontal dynamic vibration of composite foundation.The results show that an increase in elastic modulus of the surface soil is an effective way to improve the dynamic stability of the composite foundation in service conditions.The conclusions drawn from the numerical examples can develop some guidelines for the current foundation design of offshore wind turbines.展开更多
With the rapid advancement of optoelectronic technology,high-performance photodetectors are increasingly in demand in fields such as environmental monitoring,optical communication,and defense systems,where ultraviolet...With the rapid advancement of optoelectronic technology,high-performance photodetectors are increasingly in demand in fields such as environmental monitoring,optical communication,and defense systems,where ultraviolet detection is critical.However,conventional semiconductor materials suffer from limited UV-visible detection capabilities owing to their narrow bandgaps and high dark currents.To address these challenges,wide-bandgap semiconductors have emerged as promising alternatives.Here,we fabricated a horizontally structured n–n heterojunction photodetector by growingβ-Ga_(2)O_(3) on Si–GaN via plasma-enhanced chemical vapor deposition.The device exhibits a self-powered photocurrent of 3.5 nA at zero bias,enabled by the photovoltaic effect of the space charge region.Under 254-nm and 365-nm illumination,it exhibits rectification behavior,achieving a responsivity of 0.475 m A/W(0 V,220??W/cm~2 at 254 nm)and 257.6 mA/W(-5 V),respectively.Notably,the photodetector demonstrates a high photocurrent-to-dark current ratio of 10~5 under-5-V bias,highlighting its potential for self-powered and high-performance UV detection applications.展开更多
AIM:To evaluate the clinical outcomes of a new minimally invasive technique using horizontal mattress sutures and Hoffman pockets for four-point refixation of dislocated fourhaptic intraocular lenses(IOLs).METHODS:Thi...AIM:To evaluate the clinical outcomes of a new minimally invasive technique using horizontal mattress sutures and Hoffman pockets for four-point refixation of dislocated fourhaptic intraocular lenses(IOLs).METHODS:This retrospective consecutive case series included eyes with dislocated Akreos AO60 IOLs underwent scleral refixation using a horizontal mattress doubleneedle suture technique with intralamellar knot burial via Hoffman pockets.Clinical outcomes assessed included pre-and postoperative best-corrected visual acuity(BCVA),intraocular pressure(IOP),spherical equivalent(SE),suture duration,IOL centration,and perioperative complications.RESULTS:A total of 10 eyes from 10 patients(6 males)were included.The mean age at the time of IOL refixation was 53.10±13.07y(range:28-68y).The mean interval between initial IOL implantation and dislocation was 8.44±3.54y.The mean postoperative follow-up duration was 11.45±10.30mo.Surgical time averaged 15.3±1.77min,with no intraoperative complications.The mean axial length was 27.16±4.35 mm,with high myopia(HM)as the leading comorbidity(4/10 eyes).Postoperative BCVA significantly improved compared to preoperative values(P=0.025).Postoperative SE was significantly improved compared with preoperative(P=0.01).All IOLs remained centered throughout follow-up.CONCLUSION:This minimally invasive four-point scleral fixation technique offers a safe and effective refixation strategy for dislocated four-haptic IOLs.The horizontal mattress suture configuration combined with Hoffman pockets facilitates durable centration,avoids conjunctival dissection,and could be adopted into routine surgical practice.展开更多
Climate model prediction has been improved by enhancing model resolution as well as the implementation of sophisticated physical parameterization and refinement of data assimilation systems[section 6.1 in Wang et al.(...Climate model prediction has been improved by enhancing model resolution as well as the implementation of sophisticated physical parameterization and refinement of data assimilation systems[section 6.1 in Wang et al.(2025)].In relation to seasonal forecasting and climate projection in the East Asian summer monsoon season,proper simulation of the seasonal migration of rain bands by models is a challenging and limiting factor[section 7.1 in Wang et al.(2025)].展开更多
The effectiveness of horizontal well multi-stage and multi-cluster fracturing in the fractured soft coal seam roof for coalbed methane(CBM) extraction has been demonstrated.This study focuses on the geological charact...The effectiveness of horizontal well multi-stage and multi-cluster fracturing in the fractured soft coal seam roof for coalbed methane(CBM) extraction has been demonstrated.This study focuses on the geological characteristics of the No.5 and No.11 coal seams in the Hancheng Block,Ordos Basin,China.A multi-functional,variable-size rock sample mold capable of securing the wellbore was developed to simulate layered formations comprising strata of varying lithology and thicknesses.A novel segmented fracturing simulation method based on an expandable pipe plugging technique is proposed.Large-scale true triaxial experiments were conducted to investigate the effects of horizontal wellbore location,perforation strategy,roof lithology,and vertical stress difference on fracture propagation,hydraulic energy variation,and the stimulated reservoir volume in horizontal wells targeting the soft coal seam roof.The results indicate that bilateral downward perforation with a phase angle of 120° optimizes hydraulic energy conservation,reduces operational costs,enhances fracture formation,and prevents fracturing failure caused by coal powder generation and migration.This perforation mode is thus considered optimal for coal seam roof fracturing.When the roof consists of sandstone,each perforation cluster tends to initiate a single dominant fracture with a regular geometry.In contrast,hydraulic fractures formed in mudstone roofs display diverse morphology.Due to its high strength,the sandstone roof requires significantly higher pressure for crack initiation and propagation,whereas the mudstone roof,with its strong water sensitivity,exhibits lower fracturing pressures.To mitigate inter-cluster interference,cluster spacing in mudstone roofs should be greater than that in sandstone roofs.Horizontal wellbore placement critically influences fracturing effectiveness.For indirect fracturing in sandstone roofs,an optimal position is 25 mm away from the lithological interface.In contrast,the optimal location for indirect fracturing in mudstone roofs is directly at the lithological interface with the coal seam.Higher vertical stress coefficients lead to increased fractu ring pressures and promote vertical,layer-penetrating fractures.A coefficient of 0.5 is identified as optimal for achieving effective indirect fracturing.This study provides valuable insights for the design and optimization of staged fracturing in horizontal wells targeting crushed soft coal seam roofs.展开更多
Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. T...Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. The initiation and propagation of hydraulic fractures will cause stress redistribution and may activate natural fractures in the reservoir. Due to the limitation of the analytical method in calculation of induced stresses, we propose a numerical method, which incorporates the interaction of hydraulic fractures and the wellbore, and analyzes the stress distri- bution in the reservoir under different stage spacing. Simulation results indicate the following： （1） The induced stress was overestimated from the analytical method because it did not take into account the interaction between hydraulic fractures and the horizontal wellbore. （2） The hydraulic fracture had a considerable effect on the redis- tribution of stresses in the direction of the horizontal wellbore in the reservoir. The stress in the direction per- pendicular to the horizontal wellbore after hydraulic frac- turing had a minor change compared with the original in situ stress. （3） Stress interferences among fractures were greatly connected with the stage spacing and the distance from the wellbore. When the fracture length was 200 m, and the stage spacing was 50 m, the stress redistribution due to stage fracturing may divert the original stress pat- tern, which might activate natural fractures so as to generate a complex fracture network.展开更多
To resolve the issue of design for multi-stage and multi-cluster fracturing in multi-zone reservoirs, a new efficient algorithm for the planar 3 D multi-fracture propagation model was proposed. The model considers flu...To resolve the issue of design for multi-stage and multi-cluster fracturing in multi-zone reservoirs, a new efficient algorithm for the planar 3 D multi-fracture propagation model was proposed. The model considers fluid flow in the wellbore-perforation-fracture system and fluid leak-off into the rock matrix, and uses a 3 D boundary integral equation to describe the solid deformation. The solid-fluid coupling equation is solved by an explicit integration algorithm, and the fracture front is determined by the uniform tip asymptotic solutions and shortest path algorithm. The accuracy of the algorithm is verified by the analytical solution of radial fracture, results of the implicit level set algorithm, and results of organic glass fracturing experiment. Compared with the implicit level set algorithm(ILSA), the new algorithm is much higher in computation speed. The numerical case study is conducted based on a horizontal well in shale gas formation of Zhejiang oilfield. The impact of stress heterogeneity among multiple clusters and perforation number distribution on multi-fracture growth and fluid distribution among multiple fractures are analyzed by numerical simulation. The results show that reducing perforation number in each cluster can counteract the effect of stress contrast among perforation clusters. Adjusting perforation number in each cluster can promote uniform flux among clusters, and the perforation number difference should better be 1-2 among clusters. Increasing perforation number in the cluster with high in situ stress is conducive to uniform fluid partitioning. However, uniform fluid partitioning is not equivalent to uniform fracture geometry. The fracture geometry is controlled by the stress interference and horizontal principal stress profile jointly.展开更多
Predicting the productivity of multistage fractured horizontal wells plays an important role in exploiting unconventional resources.In recent years,machine learning(ML)models have emerged as a new approach for such st...Predicting the productivity of multistage fractured horizontal wells plays an important role in exploiting unconventional resources.In recent years,machine learning(ML)models have emerged as a new approach for such studies.However,the scarcity of sufficient real data for model training often leads to imprecise predictions,even though the models trained with real data better characterize geological and engineering features.To tackle this issue,we propose an ML model that can obtain reliable results even with a small amount of data samples.Our model integrates the synthetic minority oversampling technique(SMOTE)to expand the data volume,the support vector machine(SVM)for model training,and the particle swarm optimization(PSO)algorithm for optimizing hyperparameters.To enhance the model performance,we conduct feature fusion and dimensionality reduction.Additionally,we examine the influences of different sample sizes and ML models for training.The proposed model demonstrates higher prediction accuracy and generalization ability,achieving a predicted R^(2)value of up to 0.9 for the test set,compared to the traditional ML techniques with an R^(2)of 0.13.This model accurately predicts the production of fractured horizontal wells even with limited samples,supplying an efficient tool for optimizing the production of unconventional resources.Importantly,the model holds the potential applicability to address similar challenges in other fields constrained by scarce data samples.展开更多
The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospher...The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.展开更多
Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Cu...Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.展开更多
A novel laboratory simulation method for modeling multi-staged fracturing in a horizontal well was established based on a true tri-axial hydraulic fracturing simulation system. Using this method, the influences of net...A novel laboratory simulation method for modeling multi-staged fracturing in a horizontal well was established based on a true tri-axial hydraulic fracturing simulation system. Using this method, the influences of net pressure in hydraulic fracture, stage spacing, perforation parameter, horizontal stress bias and well cementation quality on the propagation geometry of multiple fractures in a tight sandstone formation were studied in detail. The specimen splitting and analogy analysis of fracturing curve patterns reveals: Multiple fractures tend to merge under the condition of high horizontal stress bias and short stage spacing with pre-existing hydraulic fractures under critical closure situation, and the propagation of subsequent fractures is possibly suppressed because of high net pressure in pre-created fractures and asymmetric distribution of fracture width. And the subsequently created fractures are situated in the induced stress decreasing zone due to long stage spacing, leading to weak stress interference, and perforation with intense density and deep penetration facilitates the decrease of initiation fracture pressure. The deflection angle of subsequent fracture and horizontal stress variation tend to be amplified under low horizontal bias with constant net pressure in fractures. The longitudinal fracture is likely to be initiated at the interface of wellbore and concrete sample with poor cementation quality. The initiation fracture pressure of the different stages increases in turn, with the largest increase of 30%. Pressure quickly declines after initiation with low propagation pressure when the transverse hydraulic fracture is formed. The pressure reduces with fluctuation after the initiation of fracture when the fracture deflects, the extension pressure is high, and the fracture formed is tortuous and narrow. There is a violently fluctuant rise of pressure with multiple peak values when longitudinal fracture created, and it is hard to distinguish the features between the initiation stage and propagation stage.展开更多
The horizontal ecological compensation plays an important role in balancing the interests of all parties and coordinating regional development in the basin.However,the mechanism of ecological compensation based on emb...The horizontal ecological compensation plays an important role in balancing the interests of all parties and coordinating regional development in the basin.However,the mechanism of ecological compensation based on embodied carbon emissions is still poorly understood.Here,taking the Yellow River Basin as the research area,we use the multi-regional input-output(MRIO)model to measure the embodied carbon transfers between its seven urban agglomerations in 2012 and 2017 from the viewpoint of value-added trade benefits.Further,for the first time,the green trade benefits and ecological compensation amounts are analyzed.The results indicate that:(1)The transfer of trade-embodied carbon among the urban agglomerations in the basin showed obvious spatial heterogeneity and geographic proximity effects,and trade-embodied carbon outflows(inflows)had a pattern of"highest in the midstream,second in the downstream,and lowest in the upstream".(2)The industry composition of the urban agglomerations in relation to embodied carbon outflows(inflows)was similar,mainly in the service and heavy manufacturing industries.(3)The spatial pattern of green trade benefits in the basin had shifted from"high in the north and low in the surrounding area"to"high in the east-central part and low in the west".(4)The pattern of ecological compensation in the basin had shifted from the upstream surplus,the middle and downstream deficit to the midstream deficit,and the upstream and downstream surplus.Therefore,we recommend improving energy structures in high-demand urban agglomerations by adopting clean energy,focusing on decarbonization and energy efficiency in resource-rich regions.Additionally,promoting low-carbon economies,especially in the service and heavy manufacturing industries,implementing differentiated emission reduction strategies,and optimizing carbon compensation mechanisms considering regional disparities and resource endowments are crucial.It is expected that the study can enrich the scientific basis of horizontal ecological compensation and increase the fairness of regional carbon emission rights allocation.展开更多
Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stre...Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.展开更多
In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, w...In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, which considers the influence of viscous flow, Knudsen diffusion, surface diffusion, and adsorption layer thickness. A dis- crete-fracture model is used to simplify the fracture mod- cling, and a finite element method is applied to solve the model. The numerical simulation results indicate that with a decrease in the intrinsic matrix permeability, Knudsen diffusion and surface diffusion contributions to production become large and cannot be ignored. The existence of an adsorption layer on the nanopore surfaces reduces the effective pore radius and the effective porosity, resulting in low production from fractured horizontal wells. With a decrease in the pore radius, considering the adsorption layer, the production reduction rate increases. When the pore radius is less than 10 nm, because of the combined impacts of Knudsen diffusion, surface diffusion, and adsorption layers, the production of multi-stage fractured horizontal wells increases with a decrease in the pore pressure. When the pore pressure is lower than 30 MPa, the rate of production increase becomes larger with a decrease in pore pressure.展开更多
The escalating global dissemination of plasmid-mediated antibiotic resistance poses a formidable threat to global health.Conjugation stands as a pivotal mechanism for horizontal gene transfer among bacterial populatio...The escalating global dissemination of plasmid-mediated antibiotic resistance poses a formidable threat to global health.Conjugation stands as a pivotal mechanism for horizontal gene transfer among bacterial populations,facilitating the spread of antibiotic resistance genes(ARGs).Microelectrolysis has garnered attention as an efficacious strategy for mitigating antibiotic concentrations in wastewater,yet its potential impact on ARG horizontal transfer remain largely unexplored.This comprehensive investigation unveils that microelectrolysis not only influences but significantly accelerates the conjugative transfer of ARG-harboring plasmids.Remarkably,this phenomenon is corroborated at the microbial community scale,underscoring its ecological relevance.Alarmingly,the study highlights the vulnerability of intestinalmicroorganisms to acquire antibiotic resistance under electrolytic stimulation,posing heightened risks to both animal and human health.Delving deeper,the study elucidates the underlyingmechanisms responsible for this enhanced conjugative transfer.It reveals that microelectrolysis augments the abundance of mating-competent cells,triggers the generation of reactive oxygen species,inflicts modest membrane damage,and upregulates the expression of genes critical for conjugation.These findings collectively contribute to a more profound comprehension of the environmental dissemination dynamics and associated public health implications of ARGs in the context of wastewater treatment employing microelectrolytic technologies.展开更多
Measurements from a hyperspectral infrared(HIR) sounder onboard a satellite in geostationary orbit not only provide atmospheric thermodynamic information,but also can be used to infer dynamic information with high tem...Measurements from a hyperspectral infrared(HIR) sounder onboard a satellite in geostationary orbit not only provide atmospheric thermodynamic information,but also can be used to infer dynamic information with high temporal resolution.Radiance measurements from the Geostationary Interferometric Infrared Sounder(GIIRS),obtained with 15-min temporal resolution during Typhoon Maria(2018) and 30-min temporal resolution during Typhoon Lekima(2019),were used to derive three-dimensional(3D) horizontal winds by tracking the motion of atmospheric moisture.This work focused on the impact of assimilation of 3D winds on typhoon analyses and forecasts using the operational NWP model of the China Meteorological Administration(CMA-MESO),and improved understanding of the potential benefits of assimilating dynamic information from geostationary sounder data with higher temporal resolution.The standard deviation of the observations minus simulations revealed that the accuracy of the derived 3D winds with 15-min resolution was higher than that of derived winds with 30-min resolution.Experiments showed that the assimilation system can effectively absorb the information of the derived 3D winds,and that dynamic information from clear-sky areas can be transferred to typhoon areas.In typhoon prediction,assimilation of the derived 3D winds had greatest influence on the typhoon track,and less influence on the maximum wind speed.Assimilation of the derived 3D winds reduced the average track error by 17.4% for Typhoon Maria(2018) and by 3.5% for Typhoon Lekima(2019) during their entire 36-h forecasts initiated at different times.Assimilation of GIIRS dynamic information can substantially improve forecasts of heavy precipitation by CMAMESO.Results indicate that the assimilation of dynamic information from high-temporal-resolution geostationary HIR sounder data adds value for improved numerical weather prediction.展开更多
基金supported by the State Key Research Development Program of China(Grant No.2021YFC2800905-02)the National Natural Science Foundation of China(Grant No.52304208)。
文摘Identifying geohazards such as landslides and methane leakage is crucial during gas extraction from natural gas hydrate(NGH)reservoirs,and understanding reservoir settlement behavior is central to this assessment.Horizontal wells can enlarge the pressure relief zone within the formation,improving single-well productivity,and are therefore considered a promising approach for NGH development.This study examines the settlement response of hydrate-bearing sediments during depressurization using horizontal wells.A fully coupled thermal,hydraulic,mechanical,and chemical(THMC)model with representative reservoir properties(Shenhu region in the South China Sea)is presented accordingly.The simulations show that lower production pressures,while increasing gas output,also intensify formation settlement.The maximum difference in settlement between the lowest and highest production pressures reaches 0.016 m,contributing to more pronounced differential subsidence.Optimal well placement,specifically targeting a low-saturation hydrate zone containing free gas and situated adjacent to a high-saturation hydrate layer,markedly improves both gas production rate and cumulative yield,while reducing overall settlement and limiting changes in effective stress.
文摘Dear Editor,Dorsal pontine lesions may cause a variety of complex neuro-ophthalmic deficits,including horizontal gaze palsy(HGP),internuclear ophthalmoplegia,one-and-ahalf syndrome,abducens nerve palsy,skew deviation,or any combination of these.Here we present a rare case of an adult patient who developed multiple complicated clinical manifestations after surgical removal of a pontine cavernous hemangioma(PCH).Our case highlights a single pontine lesion may involve complicated neural pathways and result in complicated symptoms and signs,in which abducens nerve palsy or skew deviation is easily missed when combined with HGP.
基金supported by the National Science and Technology Major Project of China(No.2025ZD1405702)the Scientific Research and Technology Development Project of PetroChina Coalbed Methane Co.,Ltd.(Project No.25MQCTSG010)Applied Science and Technology Project of PetroChina Company Limited(2023ZZ18YJ04).
文摘Significant differences exist between deep and medium-shallow coalbed methane(CBM)reservoirs.The unclear understanding of flowback and production behavior severely constrains the development of deep CBM resources.To address this challenge,guided by the gas-liquid two-phase flow theory in ultra-low permeability reservoirs,and integrating theoretical analysis,numerical simulation,and insights from production practices,this study classifies the flowback and production stages of deep CBM well considering the Daning-Jixian Block,Eastern Ordos Basin as a representative case.We summarize the flowback characteristics for each stage and establish a standard flowback production type curve,aiming to guide field operations.The results indicate that:(a)The production process of deep CBM horizontal wells can be divided into five distinct stages:initial single-phase water dewatering stage,initial gas appearance to peak water production stage,gas breakthrough to peak gas production stage,stable production and decline stage,and low-rate production stage.(b)Based on reservoir energy,two standard type curves for horizontal well flowback production are established:the‘Sufficient Reservoir Energy’type and the‘Insufficient Reservoir Energy’type.The former achieves a higher initial gas rate(up to 12×10^(4)m^(3)/d)but exhibits poorer stability,while the latter achieves a lower stable rate(up to 8×10^(4)m^(3)/d)but demonstrates stronger stability.Numerical simulation confirms these behavioral patterns and reveals the underlying mechanisms related to the effectively drained area where pressure is significantly depleted.The findings from this study have guided the flowback production operations in 53 deep CBM wells with positive results,demonstrating high potential for broad application.
基金from the National Key Research and Development Program project"Adaptive Navigation Software and Hardware Technology(2018YFB0505200)."。
文摘The current inertial measurement unit(IMU)and odometry fusion navigation algorithms often incorporate non-holonomic constraints(NHC)to obtain three-dimensional velocity in the navigation frame.However,due to the integral nature of the dead reckoning algorithm,the attitude errors of the IMU accumulate over time,causing the velocity transformation results to fail to accurately reflect the threedimensional velocity in the navigation frame.Based on the fact that during a vehicle??s horizontal and uniform motion,the vertical acceleration is consistent with gravitational acceleration,this paper proposes an IMU/odometry fusion navigation algorithm based on horizontal attitude constraints(HAC).Building on non-holonomic constraints,this algorithm determines the motion state of the vehicle through accelerometer output and zeroes out the pitch and roll angles during horizontal and uniform motion.Verified through two sets of real-world vehicle test data,this algorithm improves horizontal positioning accuracy by approximately 63%and 70%,and vertical positioning accuracy by 98%and 97%,compared with the traditional NHC IMU/odometer fusion algorithm.
基金supported by the National Natural Science Foundation of China(Grant No.52178329),the China Scholarship Council(Grant No.202306130155)the Postgraduate Scientific Research Innovation Project of Hunan Province,China(Grant No.CX20230442).
文摘With the continuous development of the offshore wind industry,the design concept of composite foundation has been given attention in the past decade.This paper presents an accurate method for investigating the horizontal vibration of monopile-friction wheel composite foundations in layered saturated soil.Firstly,the three-dimensional continuum mechanics theory with the range of linear elasticity is introduced to calculate the frictional resistance distributed on the upper soil surface.Then,the resistances of multilayered soils and inviscid seawater to the pile shaft under horizontal harmonic excitation are obtained using Novak's plane strain model,Biot's porous media theory and radiationwave theory.Thirdly,the expressions for the deformation,bending moment and internal force of the Euler-Bernoulli pile are derived using the boundary conditions with definitephysical meaning and transfer matrix method.By comparing with the results of 1g laboratory test and the idealized formula reported by the literature,the rationality and accuracy of the developed dynamical model can be verified.Finally,this paper conducts a series of worked examples to investigate the influencesof the elastic modulus and thickness of three-layer saturated soil and the location of interlayer soil on the horizontal dynamic vibration of composite foundation.The results show that an increase in elastic modulus of the surface soil is an effective way to improve the dynamic stability of the composite foundation in service conditions.The conclusions drawn from the numerical examples can develop some guidelines for the current foundation design of offshore wind turbines.
基金Project supported by the Joints Fund of the National Natural Science Foundation of China(Grant No.U23A20349)the Young Scientists Fund of the National Natural Science Foundation of China(Grant Nos.62204126,62305171,62304113)。
文摘With the rapid advancement of optoelectronic technology,high-performance photodetectors are increasingly in demand in fields such as environmental monitoring,optical communication,and defense systems,where ultraviolet detection is critical.However,conventional semiconductor materials suffer from limited UV-visible detection capabilities owing to their narrow bandgaps and high dark currents.To address these challenges,wide-bandgap semiconductors have emerged as promising alternatives.Here,we fabricated a horizontally structured n–n heterojunction photodetector by growingβ-Ga_(2)O_(3) on Si–GaN via plasma-enhanced chemical vapor deposition.The device exhibits a self-powered photocurrent of 3.5 nA at zero bias,enabled by the photovoltaic effect of the space charge region.Under 254-nm and 365-nm illumination,it exhibits rectification behavior,achieving a responsivity of 0.475 m A/W(0 V,220??W/cm~2 at 254 nm)and 257.6 mA/W(-5 V),respectively.Notably,the photodetector demonstrates a high photocurrent-to-dark current ratio of 10~5 under-5-V bias,highlighting its potential for self-powered and high-performance UV detection applications.
文摘AIM:To evaluate the clinical outcomes of a new minimally invasive technique using horizontal mattress sutures and Hoffman pockets for four-point refixation of dislocated fourhaptic intraocular lenses(IOLs).METHODS:This retrospective consecutive case series included eyes with dislocated Akreos AO60 IOLs underwent scleral refixation using a horizontal mattress doubleneedle suture technique with intralamellar knot burial via Hoffman pockets.Clinical outcomes assessed included pre-and postoperative best-corrected visual acuity(BCVA),intraocular pressure(IOP),spherical equivalent(SE),suture duration,IOL centration,and perioperative complications.RESULTS:A total of 10 eyes from 10 patients(6 males)were included.The mean age at the time of IOL refixation was 53.10±13.07y(range:28-68y).The mean interval between initial IOL implantation and dislocation was 8.44±3.54y.The mean postoperative follow-up duration was 11.45±10.30mo.Surgical time averaged 15.3±1.77min,with no intraoperative complications.The mean axial length was 27.16±4.35 mm,with high myopia(HM)as the leading comorbidity(4/10 eyes).Postoperative BCVA significantly improved compared to preoperative values(P=0.025).Postoperative SE was significantly improved compared with preoperative(P=0.01).All IOLs remained centered throughout follow-up.CONCLUSION:This minimally invasive four-point scleral fixation technique offers a safe and effective refixation strategy for dislocated four-haptic IOLs.The horizontal mattress suture configuration combined with Hoffman pockets facilitates durable centration,avoids conjunctival dissection,and could be adopted into routine surgical practice.
文摘Climate model prediction has been improved by enhancing model resolution as well as the implementation of sophisticated physical parameterization and refinement of data assimilation systems[section 6.1 in Wang et al.(2025)].In relation to seasonal forecasting and climate projection in the East Asian summer monsoon season,proper simulation of the seasonal migration of rain bands by models is a challenging and limiting factor[section 7.1 in Wang et al.(2025)].
基金support from China National Natural Science Foundation (11672333)。
文摘The effectiveness of horizontal well multi-stage and multi-cluster fracturing in the fractured soft coal seam roof for coalbed methane(CBM) extraction has been demonstrated.This study focuses on the geological characteristics of the No.5 and No.11 coal seams in the Hancheng Block,Ordos Basin,China.A multi-functional,variable-size rock sample mold capable of securing the wellbore was developed to simulate layered formations comprising strata of varying lithology and thicknesses.A novel segmented fracturing simulation method based on an expandable pipe plugging technique is proposed.Large-scale true triaxial experiments were conducted to investigate the effects of horizontal wellbore location,perforation strategy,roof lithology,and vertical stress difference on fracture propagation,hydraulic energy variation,and the stimulated reservoir volume in horizontal wells targeting the soft coal seam roof.The results indicate that bilateral downward perforation with a phase angle of 120° optimizes hydraulic energy conservation,reduces operational costs,enhances fracture formation,and prevents fracturing failure caused by coal powder generation and migration.This perforation mode is thus considered optimal for coal seam roof fracturing.When the roof consists of sandstone,each perforation cluster tends to initiate a single dominant fracture with a regular geometry.In contrast,hydraulic fractures formed in mudstone roofs display diverse morphology.Due to its high strength,the sandstone roof requires significantly higher pressure for crack initiation and propagation,whereas the mudstone roof,with its strong water sensitivity,exhibits lower fracturing pressures.To mitigate inter-cluster interference,cluster spacing in mudstone roofs should be greater than that in sandstone roofs.Horizontal wellbore placement critically influences fracturing effectiveness.For indirect fracturing in sandstone roofs,an optimal position is 25 mm away from the lithological interface.In contrast,the optimal location for indirect fracturing in mudstone roofs is directly at the lithological interface with the coal seam.Higher vertical stress coefficients lead to increased fractu ring pressures and promote vertical,layer-penetrating fractures.A coefficient of 0.5 is identified as optimal for achieving effective indirect fracturing.This study provides valuable insights for the design and optimization of staged fracturing in horizontal wells targeting crushed soft coal seam roofs.
基金supported by the Natural Science Foundation of China (Grant No. 51490653, Basic Theoretical Research of Shale Oil and Gas Effective Development)
文摘Multi-stage hydraulic fracturing of horizontal wells is the main stimulation method in recovering gas from tight shale gas reservoirs, and stage spacing deter- mination is one of the key issues in fracturing design. The initiation and propagation of hydraulic fractures will cause stress redistribution and may activate natural fractures in the reservoir. Due to the limitation of the analytical method in calculation of induced stresses, we propose a numerical method, which incorporates the interaction of hydraulic fractures and the wellbore, and analyzes the stress distri- bution in the reservoir under different stage spacing. Simulation results indicate the following： （1） The induced stress was overestimated from the analytical method because it did not take into account the interaction between hydraulic fractures and the horizontal wellbore. （2） The hydraulic fracture had a considerable effect on the redis- tribution of stresses in the direction of the horizontal wellbore in the reservoir. The stress in the direction per- pendicular to the horizontal wellbore after hydraulic frac- turing had a minor change compared with the original in situ stress. （3） Stress interferences among fractures were greatly connected with the stage spacing and the distance from the wellbore. When the fracture length was 200 m, and the stage spacing was 50 m, the stress redistribution due to stage fracturing may divert the original stress pat- tern, which might activate natural fractures so as to generate a complex fracture network.
基金China National Science and Technology Major Project(2016ZX05023).
文摘To resolve the issue of design for multi-stage and multi-cluster fracturing in multi-zone reservoirs, a new efficient algorithm for the planar 3 D multi-fracture propagation model was proposed. The model considers fluid flow in the wellbore-perforation-fracture system and fluid leak-off into the rock matrix, and uses a 3 D boundary integral equation to describe the solid deformation. The solid-fluid coupling equation is solved by an explicit integration algorithm, and the fracture front is determined by the uniform tip asymptotic solutions and shortest path algorithm. The accuracy of the algorithm is verified by the analytical solution of radial fracture, results of the implicit level set algorithm, and results of organic glass fracturing experiment. Compared with the implicit level set algorithm(ILSA), the new algorithm is much higher in computation speed. The numerical case study is conducted based on a horizontal well in shale gas formation of Zhejiang oilfield. The impact of stress heterogeneity among multiple clusters and perforation number distribution on multi-fracture growth and fluid distribution among multiple fractures are analyzed by numerical simulation. The results show that reducing perforation number in each cluster can counteract the effect of stress contrast among perforation clusters. Adjusting perforation number in each cluster can promote uniform flux among clusters, and the perforation number difference should better be 1-2 among clusters. Increasing perforation number in the cluster with high in situ stress is conducive to uniform fluid partitioning. However, uniform fluid partitioning is not equivalent to uniform fracture geometry. The fracture geometry is controlled by the stress interference and horizontal principal stress profile jointly.
基金supported by the National Natural Science Foundation of China(52274055)the Shandong Provincial Natural Science Foundation(ZR2022YQ50)the Taishan Scholar Program of Shandong Province(tsqn202408088)。
文摘Predicting the productivity of multistage fractured horizontal wells plays an important role in exploiting unconventional resources.In recent years,machine learning(ML)models have emerged as a new approach for such studies.However,the scarcity of sufficient real data for model training often leads to imprecise predictions,even though the models trained with real data better characterize geological and engineering features.To tackle this issue,we propose an ML model that can obtain reliable results even with a small amount of data samples.Our model integrates the synthetic minority oversampling technique(SMOTE)to expand the data volume,the support vector machine(SVM)for model training,and the particle swarm optimization(PSO)algorithm for optimizing hyperparameters.To enhance the model performance,we conduct feature fusion and dimensionality reduction.Additionally,we examine the influences of different sample sizes and ML models for training.The proposed model demonstrates higher prediction accuracy and generalization ability,achieving a predicted R^(2)value of up to 0.9 for the test set,compared to the traditional ML techniques with an R^(2)of 0.13.This model accurately predicts the production of fractured horizontal wells even with limited samples,supplying an efficient tool for optimizing the production of unconventional resources.Importantly,the model holds the potential applicability to address similar challenges in other fields constrained by scarce data samples.
基金supported by the National Key R&D Program of China (Grant No.2022YFF0503700)the special funds of Hubei Luojia Laboratory (Grant No.220100011)+1 种基金supported by the International Space Science Institute–Beijing(ISSI-BJ) project“The Electromagnetic Data Validation and Scientific Application Research based on CSES Satellite”and ISSI/ISSI-BJ project,“Multi-Scale Magnetosphere–Ionosphere–Thermosphere Interaction.”
文摘The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.
基金supported by National Key Research and Development Program of China,China(2024YFD1800102,2022YFD1800105 and 2022YFD1801500)National Natural Science Foundation of China,China(32372993 and 32030107)Fundamental Research Funds for the Central Universities,China(2662023PY005).
文摘Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.
文摘A novel laboratory simulation method for modeling multi-staged fracturing in a horizontal well was established based on a true tri-axial hydraulic fracturing simulation system. Using this method, the influences of net pressure in hydraulic fracture, stage spacing, perforation parameter, horizontal stress bias and well cementation quality on the propagation geometry of multiple fractures in a tight sandstone formation were studied in detail. The specimen splitting and analogy analysis of fracturing curve patterns reveals: Multiple fractures tend to merge under the condition of high horizontal stress bias and short stage spacing with pre-existing hydraulic fractures under critical closure situation, and the propagation of subsequent fractures is possibly suppressed because of high net pressure in pre-created fractures and asymmetric distribution of fracture width. And the subsequently created fractures are situated in the induced stress decreasing zone due to long stage spacing, leading to weak stress interference, and perforation with intense density and deep penetration facilitates the decrease of initiation fracture pressure. The deflection angle of subsequent fracture and horizontal stress variation tend to be amplified under low horizontal bias with constant net pressure in fractures. The longitudinal fracture is likely to be initiated at the interface of wellbore and concrete sample with poor cementation quality. The initiation fracture pressure of the different stages increases in turn, with the largest increase of 30%. Pressure quickly declines after initiation with low propagation pressure when the transverse hydraulic fracture is formed. The pressure reduces with fluctuation after the initiation of fracture when the fracture deflects, the extension pressure is high, and the fracture formed is tortuous and narrow. There is a violently fluctuant rise of pressure with multiple peak values when longitudinal fracture created, and it is hard to distinguish the features between the initiation stage and propagation stage.
基金supported by the National Natural Science Foundation of China(Grant number 42201302)the"Double First-Class"University Construction Project of Lanzhou University(Grant number:561120213)。
文摘The horizontal ecological compensation plays an important role in balancing the interests of all parties and coordinating regional development in the basin.However,the mechanism of ecological compensation based on embodied carbon emissions is still poorly understood.Here,taking the Yellow River Basin as the research area,we use the multi-regional input-output(MRIO)model to measure the embodied carbon transfers between its seven urban agglomerations in 2012 and 2017 from the viewpoint of value-added trade benefits.Further,for the first time,the green trade benefits and ecological compensation amounts are analyzed.The results indicate that:(1)The transfer of trade-embodied carbon among the urban agglomerations in the basin showed obvious spatial heterogeneity and geographic proximity effects,and trade-embodied carbon outflows(inflows)had a pattern of"highest in the midstream,second in the downstream,and lowest in the upstream".(2)The industry composition of the urban agglomerations in relation to embodied carbon outflows(inflows)was similar,mainly in the service and heavy manufacturing industries.(3)The spatial pattern of green trade benefits in the basin had shifted from"high in the north and low in the surrounding area"to"high in the east-central part and low in the west".(4)The pattern of ecological compensation in the basin had shifted from the upstream surplus,the middle and downstream deficit to the midstream deficit,and the upstream and downstream surplus.Therefore,we recommend improving energy structures in high-demand urban agglomerations by adopting clean energy,focusing on decarbonization and energy efficiency in resource-rich regions.Additionally,promoting low-carbon economies,especially in the service and heavy manufacturing industries,implementing differentiated emission reduction strategies,and optimizing carbon compensation mechanisms considering regional disparities and resource endowments are crucial.It is expected that the study can enrich the scientific basis of horizontal ecological compensation and increase the fairness of regional carbon emission rights allocation.
基金financially supported by the National Natural Science Foundation of China(No.52204084)the Open Research Fund of the State Key Laboratory of Coal Resources and safe Mining,CUMT,China(No.SKLCRSM 23KF004)+3 种基金the Interdisciplinary Research Project for Young Teachers of USTB(Fundamental Research Funds for the Central Universities),China(No.FRF-IDRY-GD22-002)the Fundamental Research Funds for the Central Universities and the Youth Teacher International Exchange and Growth Program,China(No.QNXM20220009)the National Key R&D Program of China(Nos.2022YFC2905600 and 2022 YFC3004601)the Science,Technology&Innovation Project of Xiongan New Area,China(No.2023XAGG0061)。
文摘Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.
基金supported by the National Natural Science Foundation of China (No. 51234007, No. 51490654, No. 51504276, and No. 51504277)Program for Changjiang Scholars and Innovative Research Team in University (IRT1294)+3 种基金the Natural Science Foundation of Shandong Province (ZR2014EL016, ZR2014EEP018)China Postdoctoral Science Foundation (No. 2014M551989 and No. 2015T80762)the Major Programs of Ministry of Education of China (No. 311009)Introducing Talents of Discipline to Universities (B08028)
文摘In order to investigate the influence on shale gas well productivity caused by gas transport in nanometer- size pores, a mathematical model of multi-stage fractured horizontal wells in shale gas reservoirs is built, which considers the influence of viscous flow, Knudsen diffusion, surface diffusion, and adsorption layer thickness. A dis- crete-fracture model is used to simplify the fracture mod- cling, and a finite element method is applied to solve the model. The numerical simulation results indicate that with a decrease in the intrinsic matrix permeability, Knudsen diffusion and surface diffusion contributions to production become large and cannot be ignored. The existence of an adsorption layer on the nanopore surfaces reduces the effective pore radius and the effective porosity, resulting in low production from fractured horizontal wells. With a decrease in the pore radius, considering the adsorption layer, the production reduction rate increases. When the pore radius is less than 10 nm, because of the combined impacts of Knudsen diffusion, surface diffusion, and adsorption layers, the production of multi-stage fractured horizontal wells increases with a decrease in the pore pressure. When the pore pressure is lower than 30 MPa, the rate of production increase becomes larger with a decrease in pore pressure.
基金supported by Jiangsu Agriculture Science and Technology Innovation Fund(No.CX(22)3001)。
文摘The escalating global dissemination of plasmid-mediated antibiotic resistance poses a formidable threat to global health.Conjugation stands as a pivotal mechanism for horizontal gene transfer among bacterial populations,facilitating the spread of antibiotic resistance genes(ARGs).Microelectrolysis has garnered attention as an efficacious strategy for mitigating antibiotic concentrations in wastewater,yet its potential impact on ARG horizontal transfer remain largely unexplored.This comprehensive investigation unveils that microelectrolysis not only influences but significantly accelerates the conjugative transfer of ARG-harboring plasmids.Remarkably,this phenomenon is corroborated at the microbial community scale,underscoring its ecological relevance.Alarmingly,the study highlights the vulnerability of intestinalmicroorganisms to acquire antibiotic resistance under electrolytic stimulation,posing heightened risks to both animal and human health.Delving deeper,the study elucidates the underlyingmechanisms responsible for this enhanced conjugative transfer.It reveals that microelectrolysis augments the abundance of mating-competent cells,triggers the generation of reactive oxygen species,inflicts modest membrane damage,and upregulates the expression of genes critical for conjugation.These findings collectively contribute to a more profound comprehension of the environmental dissemination dynamics and associated public health implications of ARGs in the context of wastewater treatment employing microelectrolytic technologies.
基金supported by the National Natural Science Foundation of China(Grant No.U2142201)the Fengyun Application Pion eering Project(Grant No.FY-APP-ZX-2022.01)。
文摘Measurements from a hyperspectral infrared(HIR) sounder onboard a satellite in geostationary orbit not only provide atmospheric thermodynamic information,but also can be used to infer dynamic information with high temporal resolution.Radiance measurements from the Geostationary Interferometric Infrared Sounder(GIIRS),obtained with 15-min temporal resolution during Typhoon Maria(2018) and 30-min temporal resolution during Typhoon Lekima(2019),were used to derive three-dimensional(3D) horizontal winds by tracking the motion of atmospheric moisture.This work focused on the impact of assimilation of 3D winds on typhoon analyses and forecasts using the operational NWP model of the China Meteorological Administration(CMA-MESO),and improved understanding of the potential benefits of assimilating dynamic information from geostationary sounder data with higher temporal resolution.The standard deviation of the observations minus simulations revealed that the accuracy of the derived 3D winds with 15-min resolution was higher than that of derived winds with 30-min resolution.Experiments showed that the assimilation system can effectively absorb the information of the derived 3D winds,and that dynamic information from clear-sky areas can be transferred to typhoon areas.In typhoon prediction,assimilation of the derived 3D winds had greatest influence on the typhoon track,and less influence on the maximum wind speed.Assimilation of the derived 3D winds reduced the average track error by 17.4% for Typhoon Maria(2018) and by 3.5% for Typhoon Lekima(2019) during their entire 36-h forecasts initiated at different times.Assimilation of GIIRS dynamic information can substantially improve forecasts of heavy precipitation by CMAMESO.Results indicate that the assimilation of dynamic information from high-temporal-resolution geostationary HIR sounder data adds value for improved numerical weather prediction.
