The Pearl River Estuary(PRE) is located at the onshore-offshore transition zone between South China and South China Sea Basin, and it is of great significant value in discussing tectonic relationships between South Ch...The Pearl River Estuary(PRE) is located at the onshore-offshore transition zone between South China and South China Sea Basin, and it is of great significant value in discussing tectonic relationships between South China block and South China Sea block and seismic activities along the offshore active faults in PRE. However, the researches on geometric characteristics of offshore faults in this area are extremely lacking. To investigate the offshore fault distribution and their geometric features in the PRE in greater detail, we acquired thirteen seismic reflection profiles in 2015. Combining the analysis of the seismic reflection and free-air gravity anomaly data, this paper revealed the location, continuity, and geometry of the littoral fault zone and other offshore faults in PRE. The littoral fault zone is composed of the major Dangan Islands fault and several parallel, high-angle, normal faults, which mainly trend northeast to northeast-to-east and dip to the southeast with large displacements. The fault zone is divided into three different segments by the northwest-trending faults. Moreover, the basement depth around Dangan Islands is very shallow, while it suddenly increases along the islands westward and southward. These has resulted in the islands and neighboring areas becoming the places where the stress accumulates easily. The seismogenic pattern of this area is closely related to the comprehensive effect of intersecting faults together with the low velocity layer.展开更多
Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China a...Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.展开更多
Coastal defenses such as the breakwaters are important structures to maintain the navigation conditions in a harbor.The estimation of their hydrodynamic characteristics is conventionally done using physical models,sub...Coastal defenses such as the breakwaters are important structures to maintain the navigation conditions in a harbor.The estimation of their hydrodynamic characteristics is conventionally done using physical models,subjecting to higher costs and prolonged procedures.Soft computing methods prove to be useful tools,in cases where the data availability from physical models is limited.The present paper employs adaptive neuro-fuzzy inference system(ANFIS)and artificial neural network(ANN)models to the data obtained from physical model studies to develop a novel methodology to predict the reflection coefficient(Kr)of seaside perforated semicircular breakwaters under low wave heights,for which no physical model data is available.The prediction was done using the input parameters viz.,incident wave height(Hi),wave period(T),center-to-center spacing of perforations(S),diameter of perforations(D),radius of semicircular caisson(R),water depth(d),and semicircular breakwater structure height(hs).The study shows the prediction below the available data range of wave heights is possible by ANFIS and ANN models.However,the ANFIS performed better with R^2=0.9775 and the error reduced in comparison with the ANN model with R2=0.9751.Study includes conventional data segregation and prediction using ANN and ANFIS.展开更多
Sand dust belts span approximately one-fifth of the global land surface.In these regions,dust tends to settle on vegetation surfaces,altering the observed reflectance and affecting remote sensing detections.To enhance...Sand dust belts span approximately one-fifth of the global land surface.In these regions,dust tends to settle on vegetation surfaces,altering the observed reflectance and affecting remote sensing detections.To enhance the accuracy of maize growth monitoring in dust-affected regions,this study aims to quantify the effect of sand dust retention on maize during the tasseling stage in the Kashgar Prefecture,Xinjiang Uygur Autonomous Region,China,by analyzing changes in canopy reflectance and vegetation indices.First,field sampling was conducted to measure the key canopy structure parameters and dust retention levels of maize,and laboratory spectral measurements were performed on leaf spectral properties under gradient dust retention.The measured data were then used to drive the LargE-Scale remote sensing data and image Simulation framework(LESS)model for simulating realistic maize canopy spectra across different dust levels,with validation against Sentinel-2 imagery.Second,on the basis of the simulated and satellite-derived spectra,the dust resistance of 36 common vegetation indices was systematically evaluated,and new robust dust-resistant indices were developed.The results showed that compared with dust-free maize,the canopy reflectance of dust-retained maize followed an increase–decrease–increase pattern,with critical turning points at 735 and 1325 nm.The maximum reflectance difference of–0.11755(change rate:29.002%)occurred within the 735–1325 nm range at 24 g/m^(2)dust retention,and the minimum reflectance difference of 0.04285(change rate:148.950%)was observed in the 350–735 nm range under the same dust retention level.Among the 36 vegetation indices,only the global environment monitoring index(GEMI)and the ratio of transformed chlorophyll absorption in reflectance index to optimized soil-adjusted vegetation index(TCARI/OSAVI)exhibited dust resistance,with GEMI being effective below 6 g/m^(2)and TCARI/OSAVI remaining stable across all levels(average ratio:0.970).The newly developed indices in this study,(RE3–RE2)/(NIR–RE2),(RE3–RE2)/(RE4–RE2),and(NIR–RE2)/(RE4–RE2),retained values within the predefined dust-resistant range over the full dust retention levels of 0–24 g/m^(2),thus showing a more stable dust resistance compared with the commonly used 36 vegetation indices.Specially,(RE3–RE2)/(RE4–RE2)performed the most robustly in Sentinel-2 imagery,that is,58.020%of pixels were within the dust-resistant range,and an average ratio of 0.937 was obtained for the original-spectra index.This study provides a scientific basis for crop monitoring and management in dust-affected regions.展开更多
The existing seismic reflection pattern classification methods need to convert multidimensional prestack seismic data into one-dimensional vectors for processing,which loses the characteristics of amplitude variation ...The existing seismic reflection pattern classification methods need to convert multidimensional prestack seismic data into one-dimensional vectors for processing,which loses the characteristics of amplitude variation with offset/azimuth in the prestack seismic data.In this study,a tensor discriminant dictionary learning method for classifying prestack seismic reflection patterns is proposed.The method is initially based on the tensor Tucker decomposition algorithm and uses a tensor form to characterize the prestack seismic data with multidimensional features.The tensor discriminant dictionary is then used to reduce the influence of noise on the sample features.Finally,the method uses the Pearson correlation coefficient to measure the correlation degree of the sparse representation coefficients of different types of tensors.The advantages of the new method are as follows.(1)It can retain the rich structural features in different dimensions in the prestack data.(2)It adjusts the threshold of the Pearson correlation coefficient to optimize the classification effect.(3)It fully uses drilling information and expert knowledge and performs calibration training of the sample labels.The numerical-model tests confirm that the new method is more accurate and robust than the traditional support vector machine and K-nearest neighbor classification algorithms.The application of actual data further confirms that the classification results of the new method agree with the geological patterns and are more suitable for the analysis and interpretation of sedimentary facies.展开更多
Structured-illumination reflectance imaging(SIRI)provides a new means for food quality detection.This original work investigated the capability of(SIRI)technique coupled with multivariate chemometrics to evaluate the ...Structured-illumination reflectance imaging(SIRI)provides a new means for food quality detection.This original work investigated the capability of(SIRI)technique coupled with multivariate chemometrics to evaluate the microbial contamination in pork inoculated with Pseudomonas fluorescens and Brochothrix thermosphacta during storage at different temperatures.The prediction performances based on different spectrum and the textural features of direct component and amplitude component images demodulated from the SIRI pattern,as well as their data fusion were comprehensively compared.Based on the full wavelength spectrum(420-700 nm)of amplitude component images,the orthogonal signal correction coupled with support vector machine regression provided the best predictions of the number of P.fluorescens and B.thermosphacta in pork,with the determination coefficients of prediction(R_(p)^(2))values of 0.870 and 0.906,respectively.Besides,the prediction models based on the amplitude component or direct component image textural features and the data fusion models using spectrum and textural features from direct component and amplitude component images cannot significantly improve their prediction accuracy.Consequently,SIRI can be further considered as a potential technique for the rapid evaluation of microbial contaminations in pork meat.展开更多
During drilling operations,the low resolution of seismic data often limits the accurate characterization of small-scale geological bodies near the borehole and ahead of the drill bit.This study investigates high-resol...During drilling operations,the low resolution of seismic data often limits the accurate characterization of small-scale geological bodies near the borehole and ahead of the drill bit.This study investigates high-resolution seismic data processing technologies and methods tailored for drilling scenarios.The high-resolution processing of seismic data is divided into three stages:pre-drilling processing,post-drilling correction,and while-drilling updating.By integrating seismic data from different stages,spatial ranges,and frequencies,together with information from drilled wells and while-drilling data,and applying artificial intelligence modeling techniques,a progressive high-resolution processing technology of seismic data based on multi-source information fusion is developed,which performs simple and efficient seismic information updates during drilling.Case studies show that,with the gradual integration of multi-source information,the resolution and accuracy of seismic data are significantly improved,and thin-bed weak reflections are more clearly imaged.The updated seismic information while-drilling demonstrates high value in predicting geological bodies ahead of the drill bit.Validation using logging,mud logging,and drilling engineering data ensures the fidelity of the processing results of high-resolution seismic data.This provides clearer and more accurate stratigraphic information for drilling operations,enhancing both drilling safety and efficiency.展开更多
Reflection attacks are one of the most intimidating threats organizations face.A reflection attack is a special type of distributed denial-of-service attack that amplifies the amount of malicious traffic by using refl...Reflection attacks are one of the most intimidating threats organizations face.A reflection attack is a special type of distributed denial-of-service attack that amplifies the amount of malicious traffic by using reflectors and hides the identity of the attacker.Reflection attacks are known to be one of the most common causes of service disruption in large networks.Large networks perform extensive logging of NetFlow data,and parsing this data is an advocated basis for identifying network attacks.We conduct a comprehensive analysis of NetFlow data containing 1.7 billion NetFlow records and identified reflection attacks on the network time protocol(NTP)and NetBIOS servers.We set up three regression models including the Ridge,Elastic Net and LASSO.To the best of our knowledge,there is no work that studied different regression models to understand patterns of reflection attacks in a large network.In this paper,we(a)propose an approach for identifying correlations of reflection attacks,and(b)evaluate the three regression models on real NetFlow data.Our results show that(a)reflection attacks on the NTP servers are not correlated,(b)reflection attacks on the NetBIOS servers are not correlated,(c)the traffic generated by those reflection attacks did not overwhelm the NTP and NetBIOS servers,and(d)the dwell times of reflection attacks on the NTP and NetBIOS servers are too small for predicting reflection attacks on these servers.Our work on reflection attacks identification highlights recommendations that could facilitate better handling of reflection attacks in large networks.展开更多
Concentrations of Iron (Fe), As, and Cu in soil samples from the fields near the Baoshan Mine in Hunan Province, China, were analyzed and soil spectral reflectance was measured with an ASD FieldSpec FR spectroradiomet...Concentrations of Iron (Fe), As, and Cu in soil samples from the fields near the Baoshan Mine in Hunan Province, China, were analyzed and soil spectral reflectance was measured with an ASD FieldSpec FR spectroradiometer (Analytical Spectral Devices, Inc., USA) under laboratory condition. Partial least square regression (PLSR) models were constructed for predicting soil metal concentrations. The data pre-processing methods, first and second derivatives (FD and SD), baseline correction (BC), standard normal variate (SNV), multiplicative scatter correction (MSC), and continuum removal (CR), were used for the spectral reflectance data pretreatments. Then, the prediction results were evaluated by relative root mean square error (RRMSE) and coefficients of determination (R 2 ). According to the criteria of minimal RRMSE and maximal R 2 , the PLSR models with the FD pretreatment (RRMSE = 0.24, R 2 = 0.61), SNV pretreatment (RRMSE = 0.08, R 2 = 0.78), and BC-pretreatment (RRMSE = 0.20, R 2 = 0.41) were considered as the final models for predicting As, Fe, and Cu, respectively. Wavebands at around 460, 1 400, 1 900, and 2 200 nm were selected as important spectral variables to construct final models. In conclusion, concentrations of heavy metals in contaminated soils could be indirectly assessed by soil spectra according to the correlation between the spectrally featureless components and Fe; therefore, spectral reflectance would be an alternative tool for monitoring soil heavy metals contamination.展开更多
Two field experiments were conducted in Jiashan and Yuhang towns of Zhejiang Province, China, to study the feasibility of predicting N status of rice using canopy spectral reflectance. The canopy spectral reflectance ...Two field experiments were conducted in Jiashan and Yuhang towns of Zhejiang Province, China, to study the feasibility of predicting N status of rice using canopy spectral reflectance. The canopy spectral reflectance of rice grown with different levels of N inputs was determined at several important growth stages. Statistical analyses showed that as a result of the different levels of N supply, there were significant differences in the N concentrations of canopy leaves at different growth stages. Since spectral reflectance measurements showed that the N status of rice was related to reflectance in the visible and NIR (near-infrared) ranges, observations for rice in 1 nm bandwidths were then converted to bandwidths in the visible and NIR spectral regions with IKONOS (space imaging) bandwidths and vegetation indices being used to predict the N status of rice. The results indicated that canopy reflectance measurements converted to ratio vegetation index (RVI) and normalized difference vegetation index (NDVI) for simulated IKONOS bands provided a better prediction of rice N status than the reflectance measurements in the simulated IKONOS bands themselves. The precision of the developed regression models using RVI and NDVI proved to be very high with R2 ranging from 0.82 to 0.94, and when validated with experimental data from a different site, the results were satisfactory with R2 ranging from 0.55 to 0.70. Thus, the results showed that theoretically it should be possible to monitor N status using remotely sensed data.展开更多
Comprehensive inversion of logging and seismic data presented in this paper is a method to improve seismic data resolution. It involves using ample high-frequency information and complete low-frequency information of ...Comprehensive inversion of logging and seismic data presented in this paper is a method to improve seismic data resolution. It involves using ample high-frequency information and complete low-frequency information of known logging to make up for the lack of limited bandwidth of practical seismic recording, obtaining an approximate reflection coefficient sequence (or wave impedance) of high resolution by iterative inversion and providing more reliable seismic evidence for further lithologic interpretation and lateral tracking, correlation and prediction of thin reservoir. The comprehensive inversion can be realized in the following steps: (1) to establish an initial model of higher resolution; (2) to obtain wavelets, and (3) to constrain iterative inversion. The key to this inversion lies in building an initial model. It is assumed from our experience that when the initial model is properly given, iterative inversion can be quickly converged to the ideal result.展开更多
Hyperspectral images have wide applications in the fields of geology,mineral exploration,agriculture,forestry and environmental studies etc.due to their narrow band width with numerous channels.However,these images co...Hyperspectral images have wide applications in the fields of geology,mineral exploration,agriculture,forestry and environmental studies etc.due to their narrow band width with numerous channels.However,these images commonly suffer from atmospheric effects,thereby limiting their use.In such a situation,atmospheric correction becomes a necessary pre-requisite for any further processing and accurate interpretation of spectra of different surface materials/objects.In the present study,two very advance atmospheric approaches i.e.QUAC and FLAASH have been applied on the hyperspectral remote sensing imagery.The spectra of vegetation,man-made structure and different minerals from the Gadag area of Karnataka,were extracted from the raw image and also from the QUAC and FLAASH corrected images.These spectra were compared among themselves and also with the existing USGS and JHU spectral library.FLAASH is rigorous atmospheric algorithm and requires various parameters to perform but it has capability to compensate the effects of atmospheric absorption.These absorption curves in any spectra play an important role in identification of the compositions.Therefore,the presence of unwanted absorption features can lead to wrong interpretation and identification of mineral composition.FLAASH also has an advantage of spectral polishing which provides smooth spectral curves which helps in accurate identification of composition of minerals.Therefore,this study recommends that FLAASH is better than QUAC for atmospheric correction and correct interpretation and identification of composition of any object or minerals.展开更多
Field experimental seismic sounding permitted us to obtain optimal shallow seismic reflection sounding parameters.In process of data processing,we obtained a high-qualitative shallow seismic reflection sounding profil...Field experimental seismic sounding permitted us to obtain optimal shallow seismic reflection sounding parameters.In process of data processing,we obtained a high-qualitative shallow seismic reflection sounding profile by using the techniques such as filtering,edition surgical blanking,prediction deconvolution,fitting static correlation of first arrival time,and velocity analysis.Comprehensive analysis on the information of reflection wave groups along the seismic sounding profile and the stratigraphic and neogeochronological data obtained from many drills near the sounding line reveals that the upper termination of the detected fault zone is located at depth of 75~80 m,in the Middle Pleistocene deposits dated to be about 220 ka BP.The continuity,discontinuity,increasing and decreasing amount of reflection wave groups and change of their configurations,in combination with geological columns of drills,permitted us to know that the width of upper termination of the fault zone is 100 m.It can be inferred from the variation of number of reflection wave groups along the profile that the scarp of hidden fault is 200 m wide and the fault is a synsedimentary active fault in the Early Pleistocene and the early stage of Middle Pleistocene.No tectonic movement,which offset the covering deposits,had occurred since the late stage of Middle Pleistocene.展开更多
Hydrological and marine seismic data, collected in the Gulf of Cadiz (respectively in July 1999, 2000, 2001 and 2002, and in April 2000 and 2001) are analysed to reveal the various structures of Mediterranean Water (M...Hydrological and marine seismic data, collected in the Gulf of Cadiz (respectively in July 1999, 2000, 2001 and 2002, and in April 2000 and 2001) are analysed to reveal the various structures of Mediterranean Water (MW). Both the hydrological and seismic data clearly identify the MW undercurrents on the Iberian slope, detached MW eddies (meddies and a cyclone) and smaller fragments of MW (filaments and small eddies). Seismic reflectivity and synthetic reflectivity computed from hydrology, indicate that strong acoustic reflectors, associated with 8 - 64 m thick homogeneous water layers, are found above and below meddies and filaments, around the MW undercurrents, but mostly in the lower part of cyclones and below submesoscale eddies. Reflectors are also observed in the near surface layers where thermohaline contrasts are quite pronounced. The successful use of seismic data to locate submesoscale MW structures, superior to that of hydrology, is related to the improved horizontal resolution.展开更多
A new design solution of data access layer for N-tier architecture is presented. It can solve the problems such as low efficiency of development and difficulties in transplantation, update and reuse. The solution util...A new design solution of data access layer for N-tier architecture is presented. It can solve the problems such as low efficiency of development and difficulties in transplantation, update and reuse. The solution utilizes the reflection technology of .NET and design pattern. A typical application of the solution demonstrates that the new solution of data access layer performs better than the current N-tier architecture. More importantly, the application suggests that the new solution of data access layer can be reused effectively.展开更多
Paleostress plays a significant role in controlling the formation, accumulation, and distribution of reservoirs, and this could be an important factor in controlling the production of hydrocarbons from the unconventio...Paleostress plays a significant role in controlling the formation, accumulation, and distribution of reservoirs, and this could be an important factor in controlling the production of hydrocarbons from the unconventional reservoirs. In this study, we will use 3D seismic reflection data to perform the slip-tendency-based stress inversion to determine the stress field in the basement of the northern slope area in the Bongor Basin. The dataset for this technique is easily available in the oil and gas companies. The stress inversion results from the basement of the northern slope area of Bongor basin show that the maximum principal stress axis (σ1) is oriented vertically, the intermediate principal stress axis (σ2) is oriented N18° and the minimum principal stress axis (σ3) is oriented N105°, and σ2/σ1 = 0.60 and σ3/σ1 = 0.29. The findings of this paper provide significant information to understand the fault reactivation at the critical stage of hydrocarbon accumulation and the regional tectonic evolution.展开更多
基金supported by the National Natural Science Foundation of China(Nos.41506046,41376060,41706054)the Opening Foundation of Key Laboratory of Ocean and Marginal Sea Geology,CAS(No.MSGL15-05)+1 种基金WPOS(No.XDA11030102-02)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA13010101)
文摘The Pearl River Estuary(PRE) is located at the onshore-offshore transition zone between South China and South China Sea Basin, and it is of great significant value in discussing tectonic relationships between South China block and South China Sea block and seismic activities along the offshore active faults in PRE. However, the researches on geometric characteristics of offshore faults in this area are extremely lacking. To investigate the offshore fault distribution and their geometric features in the PRE in greater detail, we acquired thirteen seismic reflection profiles in 2015. Combining the analysis of the seismic reflection and free-air gravity anomaly data, this paper revealed the location, continuity, and geometry of the littoral fault zone and other offshore faults in PRE. The littoral fault zone is composed of the major Dangan Islands fault and several parallel, high-angle, normal faults, which mainly trend northeast to northeast-to-east and dip to the southeast with large displacements. The fault zone is divided into three different segments by the northwest-trending faults. Moreover, the basement depth around Dangan Islands is very shallow, while it suddenly increases along the islands westward and southward. These has resulted in the islands and neighboring areas becoming the places where the stress accumulates easily. The seismogenic pattern of this area is closely related to the comprehensive effect of intersecting faults together with the low velocity layer.
基金supported by the Foundation of Institute of Geology,Chinese Academy of Geological Sciences (No. J1315)the 3D Geological Mapping Project (No. D1204)the SinoProbe-02 project of China
文摘Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.
文摘Coastal defenses such as the breakwaters are important structures to maintain the navigation conditions in a harbor.The estimation of their hydrodynamic characteristics is conventionally done using physical models,subjecting to higher costs and prolonged procedures.Soft computing methods prove to be useful tools,in cases where the data availability from physical models is limited.The present paper employs adaptive neuro-fuzzy inference system(ANFIS)and artificial neural network(ANN)models to the data obtained from physical model studies to develop a novel methodology to predict the reflection coefficient(Kr)of seaside perforated semicircular breakwaters under low wave heights,for which no physical model data is available.The prediction was done using the input parameters viz.,incident wave height(Hi),wave period(T),center-to-center spacing of perforations(S),diameter of perforations(D),radius of semicircular caisson(R),water depth(d),and semicircular breakwater structure height(hs).The study shows the prediction below the available data range of wave heights is possible by ANFIS and ANN models.However,the ANFIS performed better with R^2=0.9775 and the error reduced in comparison with the ANN model with R2=0.9751.Study includes conventional data segregation and prediction using ANN and ANFIS.
基金supported by the Fundamental Research Funds for the Central Universities(N2001020)the National Natural Science Foundation of China(41201359).
文摘Sand dust belts span approximately one-fifth of the global land surface.In these regions,dust tends to settle on vegetation surfaces,altering the observed reflectance and affecting remote sensing detections.To enhance the accuracy of maize growth monitoring in dust-affected regions,this study aims to quantify the effect of sand dust retention on maize during the tasseling stage in the Kashgar Prefecture,Xinjiang Uygur Autonomous Region,China,by analyzing changes in canopy reflectance and vegetation indices.First,field sampling was conducted to measure the key canopy structure parameters and dust retention levels of maize,and laboratory spectral measurements were performed on leaf spectral properties under gradient dust retention.The measured data were then used to drive the LargE-Scale remote sensing data and image Simulation framework(LESS)model for simulating realistic maize canopy spectra across different dust levels,with validation against Sentinel-2 imagery.Second,on the basis of the simulated and satellite-derived spectra,the dust resistance of 36 common vegetation indices was systematically evaluated,and new robust dust-resistant indices were developed.The results showed that compared with dust-free maize,the canopy reflectance of dust-retained maize followed an increase–decrease–increase pattern,with critical turning points at 735 and 1325 nm.The maximum reflectance difference of–0.11755(change rate:29.002%)occurred within the 735–1325 nm range at 24 g/m^(2)dust retention,and the minimum reflectance difference of 0.04285(change rate:148.950%)was observed in the 350–735 nm range under the same dust retention level.Among the 36 vegetation indices,only the global environment monitoring index(GEMI)and the ratio of transformed chlorophyll absorption in reflectance index to optimized soil-adjusted vegetation index(TCARI/OSAVI)exhibited dust resistance,with GEMI being effective below 6 g/m^(2)and TCARI/OSAVI remaining stable across all levels(average ratio:0.970).The newly developed indices in this study,(RE3–RE2)/(NIR–RE2),(RE3–RE2)/(RE4–RE2),and(NIR–RE2)/(RE4–RE2),retained values within the predefined dust-resistant range over the full dust retention levels of 0–24 g/m^(2),thus showing a more stable dust resistance compared with the commonly used 36 vegetation indices.Specially,(RE3–RE2)/(RE4–RE2)performed the most robustly in Sentinel-2 imagery,that is,58.020%of pixels were within the dust-resistant range,and an average ratio of 0.937 was obtained for the original-spectra index.This study provides a scientific basis for crop monitoring and management in dust-affected regions.
基金supported by the National Natural Science Foundation of China(Nos.42130812,42174151,and 41874155).
文摘The existing seismic reflection pattern classification methods need to convert multidimensional prestack seismic data into one-dimensional vectors for processing,which loses the characteristics of amplitude variation with offset/azimuth in the prestack seismic data.In this study,a tensor discriminant dictionary learning method for classifying prestack seismic reflection patterns is proposed.The method is initially based on the tensor Tucker decomposition algorithm and uses a tensor form to characterize the prestack seismic data with multidimensional features.The tensor discriminant dictionary is then used to reduce the influence of noise on the sample features.Finally,the method uses the Pearson correlation coefficient to measure the correlation degree of the sparse representation coefficients of different types of tensors.The advantages of the new method are as follows.(1)It can retain the rich structural features in different dimensions in the prestack data.(2)It adjusts the threshold of the Pearson correlation coefficient to optimize the classification effect.(3)It fully uses drilling information and expert knowledge and performs calibration training of the sample labels.The numerical-model tests confirm that the new method is more accurate and robust than the traditional support vector machine and K-nearest neighbor classification algorithms.The application of actual data further confirms that the classification results of the new method agree with the geological patterns and are more suitable for the analysis and interpretation of sedimentary facies.
基金supported by Key Research&Development Program of Jiangsu Province in China(BE2020693)Major Project of Science and Technology of Anhui Province(201903a06020010)+1 种基金Joint Key Project of Science and Technology Innovation of Yangtze River Delta in Anhui Province(202004g01020009)the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘Structured-illumination reflectance imaging(SIRI)provides a new means for food quality detection.This original work investigated the capability of(SIRI)technique coupled with multivariate chemometrics to evaluate the microbial contamination in pork inoculated with Pseudomonas fluorescens and Brochothrix thermosphacta during storage at different temperatures.The prediction performances based on different spectrum and the textural features of direct component and amplitude component images demodulated from the SIRI pattern,as well as their data fusion were comprehensively compared.Based on the full wavelength spectrum(420-700 nm)of amplitude component images,the orthogonal signal correction coupled with support vector machine regression provided the best predictions of the number of P.fluorescens and B.thermosphacta in pork,with the determination coefficients of prediction(R_(p)^(2))values of 0.870 and 0.906,respectively.Besides,the prediction models based on the amplitude component or direct component image textural features and the data fusion models using spectrum and textural features from direct component and amplitude component images cannot significantly improve their prediction accuracy.Consequently,SIRI can be further considered as a potential technique for the rapid evaluation of microbial contaminations in pork meat.
基金Supported by the National Natural Science Foundation of China(U24B2031)National Key Research and Development Project(2018YFA0702504)"14th Five-Year Plan"Science and Technology Project of CNOOC(KJGG2022-0201)。
文摘During drilling operations,the low resolution of seismic data often limits the accurate characterization of small-scale geological bodies near the borehole and ahead of the drill bit.This study investigates high-resolution seismic data processing technologies and methods tailored for drilling scenarios.The high-resolution processing of seismic data is divided into three stages:pre-drilling processing,post-drilling correction,and while-drilling updating.By integrating seismic data from different stages,spatial ranges,and frequencies,together with information from drilled wells and while-drilling data,and applying artificial intelligence modeling techniques,a progressive high-resolution processing technology of seismic data based on multi-source information fusion is developed,which performs simple and efficient seismic information updates during drilling.Case studies show that,with the gradual integration of multi-source information,the resolution and accuracy of seismic data are significantly improved,and thin-bed weak reflections are more clearly imaged.The updated seismic information while-drilling demonstrates high value in predicting geological bodies ahead of the drill bit.Validation using logging,mud logging,and drilling engineering data ensures the fidelity of the processing results of high-resolution seismic data.This provides clearer and more accurate stratigraphic information for drilling operations,enhancing both drilling safety and efficiency.
基金the auspices of the EU Horizon 2020 Research and Innovation program under Grant Agreement No.830927(CONCORDIA)by Security Lancaster under the EPSRC Grant EP/V026763/1.
文摘Reflection attacks are one of the most intimidating threats organizations face.A reflection attack is a special type of distributed denial-of-service attack that amplifies the amount of malicious traffic by using reflectors and hides the identity of the attacker.Reflection attacks are known to be one of the most common causes of service disruption in large networks.Large networks perform extensive logging of NetFlow data,and parsing this data is an advocated basis for identifying network attacks.We conduct a comprehensive analysis of NetFlow data containing 1.7 billion NetFlow records and identified reflection attacks on the network time protocol(NTP)and NetBIOS servers.We set up three regression models including the Ridge,Elastic Net and LASSO.To the best of our knowledge,there is no work that studied different regression models to understand patterns of reflection attacks in a large network.In this paper,we(a)propose an approach for identifying correlations of reflection attacks,and(b)evaluate the three regression models on real NetFlow data.Our results show that(a)reflection attacks on the NTP servers are not correlated,(b)reflection attacks on the NetBIOS servers are not correlated,(c)the traffic generated by those reflection attacks did not overwhelm the NTP and NetBIOS servers,and(d)the dwell times of reflection attacks on the NTP and NetBIOS servers are too small for predicting reflection attacks on these servers.Our work on reflection attacks identification highlights recommendations that could facilitate better handling of reflection attacks in large networks.
基金Project supported by the National Natural Science Foundation of China (No. 40571130)the Natural Science Foundation of Shanghai, China (No. 07ZR14032)
文摘Concentrations of Iron (Fe), As, and Cu in soil samples from the fields near the Baoshan Mine in Hunan Province, China, were analyzed and soil spectral reflectance was measured with an ASD FieldSpec FR spectroradiometer (Analytical Spectral Devices, Inc., USA) under laboratory condition. Partial least square regression (PLSR) models were constructed for predicting soil metal concentrations. The data pre-processing methods, first and second derivatives (FD and SD), baseline correction (BC), standard normal variate (SNV), multiplicative scatter correction (MSC), and continuum removal (CR), were used for the spectral reflectance data pretreatments. Then, the prediction results were evaluated by relative root mean square error (RRMSE) and coefficients of determination (R 2 ). According to the criteria of minimal RRMSE and maximal R 2 , the PLSR models with the FD pretreatment (RRMSE = 0.24, R 2 = 0.61), SNV pretreatment (RRMSE = 0.08, R 2 = 0.78), and BC-pretreatment (RRMSE = 0.20, R 2 = 0.41) were considered as the final models for predicting As, Fe, and Cu, respectively. Wavebands at around 460, 1 400, 1 900, and 2 200 nm were selected as important spectral variables to construct final models. In conclusion, concentrations of heavy metals in contaminated soils could be indirectly assessed by soil spectra according to the correlation between the spectrally featureless components and Fe; therefore, spectral reflectance would be an alternative tool for monitoring soil heavy metals contamination.
基金Project supported by the National Natural Science Foundation of China (Nos. 30070444 and 40201021)the British Council (No. SHA/992/308)the Doctor Foundation of Qingdao University of Science and Technology.
文摘Two field experiments were conducted in Jiashan and Yuhang towns of Zhejiang Province, China, to study the feasibility of predicting N status of rice using canopy spectral reflectance. The canopy spectral reflectance of rice grown with different levels of N inputs was determined at several important growth stages. Statistical analyses showed that as a result of the different levels of N supply, there were significant differences in the N concentrations of canopy leaves at different growth stages. Since spectral reflectance measurements showed that the N status of rice was related to reflectance in the visible and NIR (near-infrared) ranges, observations for rice in 1 nm bandwidths were then converted to bandwidths in the visible and NIR spectral regions with IKONOS (space imaging) bandwidths and vegetation indices being used to predict the N status of rice. The results indicated that canopy reflectance measurements converted to ratio vegetation index (RVI) and normalized difference vegetation index (NDVI) for simulated IKONOS bands provided a better prediction of rice N status than the reflectance measurements in the simulated IKONOS bands themselves. The precision of the developed regression models using RVI and NDVI proved to be very high with R2 ranging from 0.82 to 0.94, and when validated with experimental data from a different site, the results were satisfactory with R2 ranging from 0.55 to 0.70. Thus, the results showed that theoretically it should be possible to monitor N status using remotely sensed data.
文摘Comprehensive inversion of logging and seismic data presented in this paper is a method to improve seismic data resolution. It involves using ample high-frequency information and complete low-frequency information of known logging to make up for the lack of limited bandwidth of practical seismic recording, obtaining an approximate reflection coefficient sequence (or wave impedance) of high resolution by iterative inversion and providing more reliable seismic evidence for further lithologic interpretation and lateral tracking, correlation and prediction of thin reservoir. The comprehensive inversion can be realized in the following steps: (1) to establish an initial model of higher resolution; (2) to obtain wavelets, and (3) to constrain iterative inversion. The key to this inversion lies in building an initial model. It is assumed from our experience that when the initial model is properly given, iterative inversion can be quickly converged to the ideal result.
文摘Hyperspectral images have wide applications in the fields of geology,mineral exploration,agriculture,forestry and environmental studies etc.due to their narrow band width with numerous channels.However,these images commonly suffer from atmospheric effects,thereby limiting their use.In such a situation,atmospheric correction becomes a necessary pre-requisite for any further processing and accurate interpretation of spectra of different surface materials/objects.In the present study,two very advance atmospheric approaches i.e.QUAC and FLAASH have been applied on the hyperspectral remote sensing imagery.The spectra of vegetation,man-made structure and different minerals from the Gadag area of Karnataka,were extracted from the raw image and also from the QUAC and FLAASH corrected images.These spectra were compared among themselves and also with the existing USGS and JHU spectral library.FLAASH is rigorous atmospheric algorithm and requires various parameters to perform but it has capability to compensate the effects of atmospheric absorption.These absorption curves in any spectra play an important role in identification of the compositions.Therefore,the presence of unwanted absorption features can lead to wrong interpretation and identification of mineral composition.FLAASH also has an advantage of spectral polishing which provides smooth spectral curves which helps in accurate identification of composition of minerals.Therefore,this study recommends that FLAASH is better than QUAC for atmospheric correction and correct interpretation and identification of composition of any object or minerals.
基金A High-new Technique Project by State Development and Planning Commission of China (2001977).
文摘Field experimental seismic sounding permitted us to obtain optimal shallow seismic reflection sounding parameters.In process of data processing,we obtained a high-qualitative shallow seismic reflection sounding profile by using the techniques such as filtering,edition surgical blanking,prediction deconvolution,fitting static correlation of first arrival time,and velocity analysis.Comprehensive analysis on the information of reflection wave groups along the seismic sounding profile and the stratigraphic and neogeochronological data obtained from many drills near the sounding line reveals that the upper termination of the detected fault zone is located at depth of 75~80 m,in the Middle Pleistocene deposits dated to be about 220 ka BP.The continuity,discontinuity,increasing and decreasing amount of reflection wave groups and change of their configurations,in combination with geological columns of drills,permitted us to know that the width of upper termination of the fault zone is 100 m.It can be inferred from the variation of number of reflection wave groups along the profile that the scarp of hidden fault is 200 m wide and the fault is a synsedimentary active fault in the Early Pleistocene and the early stage of Middle Pleistocene.No tectonic movement,which offset the covering deposits,had occurred since the late stage of Middle Pleistocene.
文摘Hydrological and marine seismic data, collected in the Gulf of Cadiz (respectively in July 1999, 2000, 2001 and 2002, and in April 2000 and 2001) are analysed to reveal the various structures of Mediterranean Water (MW). Both the hydrological and seismic data clearly identify the MW undercurrents on the Iberian slope, detached MW eddies (meddies and a cyclone) and smaller fragments of MW (filaments and small eddies). Seismic reflectivity and synthetic reflectivity computed from hydrology, indicate that strong acoustic reflectors, associated with 8 - 64 m thick homogeneous water layers, are found above and below meddies and filaments, around the MW undercurrents, but mostly in the lower part of cyclones and below submesoscale eddies. Reflectors are also observed in the near surface layers where thermohaline contrasts are quite pronounced. The successful use of seismic data to locate submesoscale MW structures, superior to that of hydrology, is related to the improved horizontal resolution.
基金the Foundation for Key Teachers of Chongqing University (200209055).
文摘A new design solution of data access layer for N-tier architecture is presented. It can solve the problems such as low efficiency of development and difficulties in transplantation, update and reuse. The solution utilizes the reflection technology of .NET and design pattern. A typical application of the solution demonstrates that the new solution of data access layer performs better than the current N-tier architecture. More importantly, the application suggests that the new solution of data access layer can be reused effectively.
文摘Paleostress plays a significant role in controlling the formation, accumulation, and distribution of reservoirs, and this could be an important factor in controlling the production of hydrocarbons from the unconventional reservoirs. In this study, we will use 3D seismic reflection data to perform the slip-tendency-based stress inversion to determine the stress field in the basement of the northern slope area in the Bongor Basin. The dataset for this technique is easily available in the oil and gas companies. The stress inversion results from the basement of the northern slope area of Bongor basin show that the maximum principal stress axis (σ1) is oriented vertically, the intermediate principal stress axis (σ2) is oriented N18° and the minimum principal stress axis (σ3) is oriented N105°, and σ2/σ1 = 0.60 and σ3/σ1 = 0.29. The findings of this paper provide significant information to understand the fault reactivation at the critical stage of hydrocarbon accumulation and the regional tectonic evolution.
