Based on the hopping principle, a miniature gas fuel-powered hopper is designed and manufactured. According to thermodynamic analysis, the pressure-displacement curve in the combustion chamber after ignition is obtain...Based on the hopping principle, a miniature gas fuel-powered hopper is designed and manufactured. According to thermodynamic analysis, the pressure-displacement curve in the combustion chamber after ignition is obtained through iterative calculation, then the work on the cylinder done by high-pressure gas is calculated and the initial hopping velocity of the hopper is obtained. The wireless control system is developed to realize the tele-control of the hopper, including fuel injection and ignition. Experimental results agree well with analytical results. The hopper has a jumping ability of height 2.2 m and distance 3.5 m, and it is more than 14 times its dimension.展开更多
Owing to a certain angle existing between a belt conveyor and the parallel hoppers,and the hoppers localizing away from the centerlines of a blast furnace,particles size segregation is likely to happen in a bell-less ...Owing to a certain angle existing between a belt conveyor and the parallel hoppers,and the hoppers localizing away from the centerlines of a blast furnace,particles size segregation is likely to happen in a bell-less top blast furnace with parallel hoppers.Mastering the law of particles size segregation in hoppers could help to choose better charging parameters and optimize production and technical indices.As for the previous works on burden segregation at a bell-less top blast furnace with parallel hoppers,more attention was paid to the falling point segregation and the circumferential mass flow segregation while charging from the tilting chute,but ignoring the particle size segregation in burden hoppers as burden falls from a belt conveyor,which is the right basis of analyzing the former,and plays a significant role in controlling the gas distribution in the blast furnace.The present work takes ternary mixtures of coke in three different particle sizes to simulate the size segregation of the coke charged into the hoppers by experiments.The effect of the main striking point on size segregation is also investigated.The research shows that there exists a good linear relation between segregation coefficient k and the dimensionless main striking point when using the equation C = C_0~k to express the degree of size segregation in hoppers.The linear relation is proposed for the first time and provides a new way to predict the size segregation in hoppers,which forms a theoretical basis and technical support for reducing the size segregation degree in hoppers.展开更多
The circumferential burden distribution of bell-less top with two parallel hoppers was analyzed to obtain the expressions of burden flux and uneven ratio. The four-batch feeding spirally with two parallel hoppers was ...The circumferential burden distribution of bell-less top with two parallel hoppers was analyzed to obtain the expressions of burden flux and uneven ratio. The four-batch feeding spirally with two parallel hoppers was proposed to realize even burden distribution by uneven flux, ensuring reasonable distribution of BF gas and effective usage of heat energy and chemical energy of gas as well as stable BF production with higher quality and lower consumption.展开更多
Flow behaviors of four kinds of granular particles(i.e. sphere,ellipsoid,hexahedron and binary mixture of sphere and hexahedron) in rectangular hoppers were experimentally studied. The effects of granular shape and ho...Flow behaviors of four kinds of granular particles(i.e. sphere,ellipsoid,hexahedron and binary mixture of sphere and hexahedron) in rectangular hoppers were experimentally studied. The effects of granular shape and hopper structure on flow pattern,discharge fraction,mean particle residence time and tracer concentration distribu-tion were tested based on the visual observation and particle tracer technique. The results show that particle shape affects significantly the flow pattern. The flow patterns of sphere,ellipsoid and binary mixture are all parabolic shape,and the flow pattern shows no significant difference with the change of wedge angle. The flowing zone be-comes more sharp-angled with the increasing outlet size. The flow pattern of hexahedron is featured with straight lines. The discharge rates are in increasing order from hexahedron,sphere,binary mixture to ellipsoid. The dis-charge rate also increases with the wedge angle and outlet size. The mean particle residence time becomes shorter when the outlet size increases. The difference of mean particle residence time between the maximum and minimum values decreases as the wedge angle increases. The residence time of hexahedron is the shortest. The tracer concen-tration distribution of hexahedron at any height is more uniform than that of binary mixture. The tracer concentra-tion of sphere in the middle is lower than that near the wall,and the contrary tendency is found for ellipsoid particles.展开更多
The dynamics of granular material discharging from a cuboid but thin hopper,including the hopper flow and granular jet,are investigated via discrete element method(DEM)simulations.The slot width is varied to study its...The dynamics of granular material discharging from a cuboid but thin hopper,including the hopper flow and granular jet,are investigated via discrete element method(DEM)simulations.The slot width is varied to study its influence on the flow.It is found the flow in the cuboid hopper has similarity with the flow in two-dimensional(2D)hopper.When the slot width is large,the flowrate is higher than the predicted value from Beverloo’s law and the velocity distribution is not Gaussian-like.For granular jet,there is a transition with varying slot width.For large slot width,there is a dense core in the jet and the variations of velocities and density are relatively small.Finally,the availability of continuum model is assessed and the results show that the performance with large slot width is better than that with small slot width.展开更多
We experimentally investigate the effect of the hopper angle on the flow rate of grains discharged from a twodimensional horizontal hopper on a conveyor belt.The flow rate grows with the hopper angle,and finally reach...We experimentally investigate the effect of the hopper angle on the flow rate of grains discharged from a twodimensional horizontal hopper on a conveyor belt.The flow rate grows with the hopper angle,and finally reaches a plateau.The curve feature appears to be similar for different orifice widths and conveyor belt-driven velocities.On the basis of an empirical law of flow rate for a flat-bottom hopper,we propose a modified equation to describe the relation between the flow rate and hopper angle,which is in a good agreement with the experimental results.展开更多
We investigated the influence of an inserted bar on the hopper flow experimentally.Three geometrical parameters,size of upper outlet D1,size of lower outlet D0,and the height of bar H,are variables here.With varying H...We investigated the influence of an inserted bar on the hopper flow experimentally.Three geometrical parameters,size of upper outlet D1,size of lower outlet D0,and the height of bar H,are variables here.With varying H we found three regimes:one transition from clogging to a surface flow and another transition from a surface flow to a dense flow.For the dense flow,the flow rate follows Beverloo’s law and there is a saturation of inclination of free surfaceθ.We plotted the velocity field and there is a uniform linear relation between the particle velocity and depth from the free surface.We also found that the required value of D_(1) to guarantee the connectivity of flow is little smaller than D_(0).For the transition from a surface flow to a dense flow,there is a jump of flow rate and the minimumθfor flowing is two degrees larger than the repose angle.展开更多
The mass flow rate of a granular flow through an aperture under gravity is a long-standing challenge issue in physical science. We show that for steady flow field close to laminar flow, the dynamical equations togethe...The mass flow rate of a granular flow through an aperture under gravity is a long-standing challenge issue in physical science. We show that for steady flow field close to laminar flow, the dynamical equations together with the continue equation and Mohr-circle description of the stress are closed, and hence solvable. In a case of streamline guided by the two-dimensional hopper, we obtain a consistent condition and use it to determine the stress and the velocity distribution. Our result indicates that 3/2 power scaling behavior is recovered with a coefficient C(μ,α) being a function of frictional coefficient and the hopper angle. It is found that the predicted coefficient C(μ,α) is compatible with previous studies.展开更多
The adhesion mechanics of coal and the behavior of the coal adhesion to the hopper are analyzed. A model coal hopper is developed, and the model experiments are made by using the surface electro osmosis technology ac...The adhesion mechanics of coal and the behavior of the coal adhesion to the hopper are analyzed. A model coal hopper is developed, and the model experiments are made by using the surface electro osmosis technology according to the processing conditions. The parameters of the surface electro osmosis technology are optimized by the method of orthogonal polynomial regression designing. The result shows that the surface electro osmosis technique is one of the good methods to solve the adhering problem of coal to the coal hopper in transfer piping.展开更多
Rice brown planthopper (BPH) (Nilaparvata lugens Stal, ) which occurs 4 generations within one year in Jiangsu Province has become a serious pest and causes loss of yield on rice every year in this region. The contact...Rice brown planthopper (BPH) (Nilaparvata lugens Stal, ) which occurs 4 generations within one year in Jiangsu Province has become a serious pest and causes loss of yield on rice every year in this region. The contact toxicities of imidacloprid and methamidophos to rice BPH were tested by means of immerse topical application method and a field trial from 1993 to 1994. A randomized complete design was laid out in 6 treatments with three replications.展开更多
Field experiments were carried out in northern Zhejiang Province. Three insecticides (methamidophos,Shachongshuang and triazophos) were used to control the rice leaffolder Cnaphalocrocis medinalis and rice striped ste...Field experiments were carried out in northern Zhejiang Province. Three insecticides (methamidophos,Shachongshuang and triazophos) were used to control the rice leaffolder Cnaphalocrocis medinalis and rice striped stemborer Chilo suppressalis in rice fields during 18—27 days after transplantating. The impacts of timing and insecticides on the population development of brown planthopper Nilaparavata lugens was surveyed by direct counting on the plants or by tapping method.展开更多
A two-dimensional discrete element model （DEM） simulation of cohesive polygonal particles has been developed to assess the benefit of point source vibration to induce flow in wedge-shaped hoppers. The particle-parti...A two-dimensional discrete element model （DEM） simulation of cohesive polygonal particles has been developed to assess the benefit of point source vibration to induce flow in wedge-shaped hoppers. The particle-particle interaction model used is based on a multi-contact principle. The first part of the study investigated particle discharge under gravity without vibration to determine the critical orifice size （Bc） to just sustain flow as a function of particle shape. It is shown that polygonal-shaped particles need a larger orifice than circular particles. It is also shown that Bc decreases as the number of particle vertices increases. Addition of circular particles promotes flow of polygons in a linear manner. The second part of the study showed that vibration could enhance flow, effectively reducing Bc. The model demonstrated the importance of vibrator location （height）, consistent with previous continuum model results, and vibration amplitude in enhancing flow.展开更多
Ellipsoidal particles flowing in the hopper were simulated by using the discrete element method （DEM）, and described by the multi-element method. The contact detection algorithm and equations for ellipsoidal particl...Ellipsoidal particles flowing in the hopper were simulated by using the discrete element method （DEM）, and described by the multi-element method. The contact detection algorithm and equations for ellipsoidal particle motion in hopper were developed. And the simulation results were confirmed by experiment. Additionally, the mass flow rate, pressure distribution and velocity distribu- tion of two kinds of particles were examined. The results show that the mass flow rate of ellipsoidal particles is smaller than that of spherical particles. There is a maximum value of pressure drop at the top of the junction. Besides, the pressure drop decreases with the discharging time increasing. The velocity of spherical particle is larger than that of ellipsoidal.展开更多
基金Supported by the National Natural Science Foundation of China(50605031)~~
文摘Based on the hopping principle, a miniature gas fuel-powered hopper is designed and manufactured. According to thermodynamic analysis, the pressure-displacement curve in the combustion chamber after ignition is obtained through iterative calculation, then the work on the cylinder done by high-pressure gas is calculated and the initial hopping velocity of the hopper is obtained. The wireless control system is developed to realize the tele-control of the hopper, including fuel injection and ignition. Experimental results agree well with analytical results. The hopper has a jumping ability of height 2.2 m and distance 3.5 m, and it is more than 14 times its dimension.
文摘Owing to a certain angle existing between a belt conveyor and the parallel hoppers,and the hoppers localizing away from the centerlines of a blast furnace,particles size segregation is likely to happen in a bell-less top blast furnace with parallel hoppers.Mastering the law of particles size segregation in hoppers could help to choose better charging parameters and optimize production and technical indices.As for the previous works on burden segregation at a bell-less top blast furnace with parallel hoppers,more attention was paid to the falling point segregation and the circumferential mass flow segregation while charging from the tilting chute,but ignoring the particle size segregation in burden hoppers as burden falls from a belt conveyor,which is the right basis of analyzing the former,and plays a significant role in controlling the gas distribution in the blast furnace.The present work takes ternary mixtures of coke in three different particle sizes to simulate the size segregation of the coke charged into the hoppers by experiments.The effect of the main striking point on size segregation is also investigated.The research shows that there exists a good linear relation between segregation coefficient k and the dimensionless main striking point when using the equation C = C_0~k to express the degree of size segregation in hoppers.The linear relation is proposed for the first time and provides a new way to predict the size segregation in hoppers,which forms a theoretical basis and technical support for reducing the size segregation degree in hoppers.
文摘The circumferential burden distribution of bell-less top with two parallel hoppers was analyzed to obtain the expressions of burden flux and uneven ratio. The four-batch feeding spirally with two parallel hoppers was proposed to realize even burden distribution by uneven flux, ensuring reasonable distribution of BF gas and effective usage of heat energy and chemical energy of gas as well as stable BF production with higher quality and lower consumption.
基金Supported by the National Natural Science Foundation of China （50706007 50976025） the National Key Program of Basic Research in China （2010CB732206）+1 种基金 the Foundation of Excellent Young Scholar of Southeast University （4003001039） the Collaboration Project of China and British （2010DFA61960）
文摘Flow behaviors of four kinds of granular particles(i.e. sphere,ellipsoid,hexahedron and binary mixture of sphere and hexahedron) in rectangular hoppers were experimentally studied. The effects of granular shape and hopper structure on flow pattern,discharge fraction,mean particle residence time and tracer concentration distribu-tion were tested based on the visual observation and particle tracer technique. The results show that particle shape affects significantly the flow pattern. The flow patterns of sphere,ellipsoid and binary mixture are all parabolic shape,and the flow pattern shows no significant difference with the change of wedge angle. The flowing zone be-comes more sharp-angled with the increasing outlet size. The flow pattern of hexahedron is featured with straight lines. The discharge rates are in increasing order from hexahedron,sphere,binary mixture to ellipsoid. The dis-charge rate also increases with the wedge angle and outlet size. The mean particle residence time becomes shorter when the outlet size increases. The difference of mean particle residence time between the maximum and minimum values decreases as the wedge angle increases. The residence time of hexahedron is the shortest. The tracer concen-tration distribution of hexahedron at any height is more uniform than that of binary mixture. The tracer concentra-tion of sphere in the middle is lower than that near the wall,and the contrary tendency is found for ellipsoid particles.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11705256 and 11905272)the National Postdoctoral Program for Innovative Talents,China(Grant No.BX201700258)+1 种基金Young Scholar of CAS“Light of West China”Program for Guanghui Yang(Grant No.2018-98)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA21010202)。
文摘The dynamics of granular material discharging from a cuboid but thin hopper,including the hopper flow and granular jet,are investigated via discrete element method(DEM)simulations.The slot width is varied to study its influence on the flow.It is found the flow in the cuboid hopper has similarity with the flow in two-dimensional(2D)hopper.When the slot width is large,the flowrate is higher than the predicted value from Beverloo’s law and the velocity distribution is not Gaussian-like.For granular jet,there is a transition with varying slot width.For large slot width,there is a dense core in the jet and the variations of velocities and density are relatively small.Finally,the availability of continuum model is assessed and the results show that the performance with large slot width is better than that with small slot width.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11475018 and 11974044)the National Key Research and Development Program of China(Grant 2016YFC1401001)。
文摘We experimentally investigate the effect of the hopper angle on the flow rate of grains discharged from a twodimensional horizontal hopper on a conveyor belt.The flow rate grows with the hopper angle,and finally reaches a plateau.The curve feature appears to be similar for different orifice widths and conveyor belt-driven velocities.On the basis of an empirical law of flow rate for a flat-bottom hopper,we propose a modified equation to describe the relation between the flow rate and hopper angle,which is in a good agreement with the experimental results.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11705256 and 11905272)National Postdoctoral Program for Innovative Talents,China(Grant No.BX201700258)West Light Foundation of the Chinese Academy of Sciences(Grant No.2018-98)。
文摘We investigated the influence of an inserted bar on the hopper flow experimentally.Three geometrical parameters,size of upper outlet D1,size of lower outlet D0,and the height of bar H,are variables here.With varying H we found three regimes:one transition from clogging to a surface flow and another transition from a surface flow to a dense flow.For the dense flow,the flow rate follows Beverloo’s law and there is a saturation of inclination of free surfaceθ.We plotted the velocity field and there is a uniform linear relation between the particle velocity and depth from the free surface.We also found that the required value of D_(1) to guarantee the connectivity of flow is little smaller than D_(0).For the transition from a surface flow to a dense flow,there is a jump of flow rate and the minimumθfor flowing is two degrees larger than the repose angle.
基金Supported by the Key Research Program of Frontier Science of the Chinese Academy of Sciences under Grant No QYZDYSSW-SYS006
文摘The mass flow rate of a granular flow through an aperture under gravity is a long-standing challenge issue in physical science. We show that for steady flow field close to laminar flow, the dynamical equations together with the continue equation and Mohr-circle description of the stress are closed, and hence solvable. In a case of streamline guided by the two-dimensional hopper, we obtain a consistent condition and use it to determine the stress and the velocity distribution. Our result indicates that 3/2 power scaling behavior is recovered with a coefficient C(μ,α) being a function of frictional coefficient and the hopper angle. It is found that the predicted coefficient C(μ,α) is compatible with previous studies.
文摘The adhesion mechanics of coal and the behavior of the coal adhesion to the hopper are analyzed. A model coal hopper is developed, and the model experiments are made by using the surface electro osmosis technology according to the processing conditions. The parameters of the surface electro osmosis technology are optimized by the method of orthogonal polynomial regression designing. The result shows that the surface electro osmosis technique is one of the good methods to solve the adhering problem of coal to the coal hopper in transfer piping.
文摘Rice brown planthopper (BPH) (Nilaparvata lugens Stal, ) which occurs 4 generations within one year in Jiangsu Province has become a serious pest and causes loss of yield on rice every year in this region. The contact toxicities of imidacloprid and methamidophos to rice BPH were tested by means of immerse topical application method and a field trial from 1993 to 1994. A randomized complete design was laid out in 6 treatments with three replications.
文摘Field experiments were carried out in northern Zhejiang Province. Three insecticides (methamidophos,Shachongshuang and triazophos) were used to control the rice leaffolder Cnaphalocrocis medinalis and rice striped stemborer Chilo suppressalis in rice fields during 18—27 days after transplantating. The impacts of timing and insecticides on the population development of brown planthopper Nilaparavata lugens was surveyed by direct counting on the plants or by tapping method.
文摘A two-dimensional discrete element model （DEM） simulation of cohesive polygonal particles has been developed to assess the benefit of point source vibration to induce flow in wedge-shaped hoppers. The particle-particle interaction model used is based on a multi-contact principle. The first part of the study investigated particle discharge under gravity without vibration to determine the critical orifice size （Bc） to just sustain flow as a function of particle shape. It is shown that polygonal-shaped particles need a larger orifice than circular particles. It is also shown that Bc decreases as the number of particle vertices increases. Addition of circular particles promotes flow of polygons in a linear manner. The second part of the study showed that vibration could enhance flow, effectively reducing Bc. The model demonstrated the importance of vibrator location （height）, consistent with previous continuum model results, and vibration amplitude in enhancing flow.
文摘Ellipsoidal particles flowing in the hopper were simulated by using the discrete element method （DEM）, and described by the multi-element method. The contact detection algorithm and equations for ellipsoidal particle motion in hopper were developed. And the simulation results were confirmed by experiment. Additionally, the mass flow rate, pressure distribution and velocity distribu- tion of two kinds of particles were examined. The results show that the mass flow rate of ellipsoidal particles is smaller than that of spherical particles. There is a maximum value of pressure drop at the top of the junction. Besides, the pressure drop decreases with the discharging time increasing. The velocity of spherical particle is larger than that of ellipsoidal.
