AISI 304L is an austenitic Chromium-Nickel stainless steel offering the optimum combination of corrosion resistance, strength and ductility. These attributes make it a favorite for many mechanical components. The pape...AISI 304L is an austenitic Chromium-Nickel stainless steel offering the optimum combination of corrosion resistance, strength and ductility. These attributes make it a favorite for many mechanical components. The paper focuses on developing mathematical models to predict grain size and hardness of pulsed current micro plasma arc welded AISI 304L joints. Four factors, five level, central composite rotatable design matrix is used to optimize the number of experiments. The mathematical models have been developed by Response Surface Method (RSM) and its adequacy is checked by Analysis of Variance (ANOVA) technique. By using the developed mathematical models, grain size and hardness of the weld joints can be predicted with 99% confidence level. The developed mathematical models have been optimized using Hooke and Jeeves algorithm to minimize grain size and maximize the hardness.展开更多
Though the preferred welding process to weld aluminium alloy is frequently constant current gas tungsten arc welding (CCGTAW),it resulted in grain coarsening at the fusion zone and heat affected zone(HAZ).Hence,pulsed...Though the preferred welding process to weld aluminium alloy is frequently constant current gas tungsten arc welding (CCGTAW),it resulted in grain coarsening at the fusion zone and heat affected zone(HAZ).Hence,pulsed current gas tungsten arc welding(PCGTAW) was performed,to yield finer fusion zone grains,which leads to higher strength of AA6061 (Al-Mg-Si) aluminium alloy joints.In order to determine the most influential control factors which will yield minimum fusion zone grain size and maximum tensile strength of the joints,the traditional Hooke and Jeeves pattern search method was used.The experiments were carried out based on central composite design with 31 runs and an algorithm was developed to optimize the fusion zone grain size and the tensile strength of pulsed current gas tungsten arc welded AA6061 aluminium alloy joints.The results indicate that the peak current (Ip) and base current (IB) are the most significant parameters,to decide the fusion zone grain size and the tensile strength of the AA6061 aluminum alloy joints.展开更多
The selection of process parameter in the gas tungsten arc （GTA） welding of titanium alloy was presented for obtaining optimum grain size and hardness. Titanium alloy （Ti-6Al-4V） is one of the most important non-f...The selection of process parameter in the gas tungsten arc （GTA） welding of titanium alloy was presented for obtaining optimum grain size and hardness. Titanium alloy （Ti-6Al-4V） is one of the most important non-ferrous metals which offers great potential application in aerospace, biomedical and chemical industries, because of its low density （4.5 g/cm^3）, excellent corrosion resistance, high strength, attractive fracture behaviour and high melting point （1678℃）. The preferred welding process for titanium alloy is frequent GTA welding due to its comparatively easier applicability and better economy. In the case of single pass （GTA） welding of thinner section of this alloy, the pulsed current has been found beneficial due to its advantages over the conventional continuous current process. Many considerations come into the picture and one needs to carefully balance various pulse current parameters to reach an optimum combination. Four factors, five level, central composite, rotatable design matrix were used to optimize the required number of experimental conditions. Mathematical models were developed to predict the fusion zone grain size using analysis of variance （ANOVA） and regression analysis. The developed models were optimized using the traditional Hooke and Jeeve＇s algorithm. Experimental results were provided to illustrate the proposed approach.展开更多
文摘AISI 304L is an austenitic Chromium-Nickel stainless steel offering the optimum combination of corrosion resistance, strength and ductility. These attributes make it a favorite for many mechanical components. The paper focuses on developing mathematical models to predict grain size and hardness of pulsed current micro plasma arc welded AISI 304L joints. Four factors, five level, central composite rotatable design matrix is used to optimize the number of experiments. The mathematical models have been developed by Response Surface Method (RSM) and its adequacy is checked by Analysis of Variance (ANOVA) technique. By using the developed mathematical models, grain size and hardness of the weld joints can be predicted with 99% confidence level. The developed mathematical models have been optimized using Hooke and Jeeves algorithm to minimize grain size and maximize the hardness.
基金Naval Research Board (NRB),Ministry of Defence,New Delhi for the financial support to carry out this investigation through sponsored project No.DNRD/05/4003/NRB/67.
文摘Though the preferred welding process to weld aluminium alloy is frequently constant current gas tungsten arc welding (CCGTAW),it resulted in grain coarsening at the fusion zone and heat affected zone(HAZ).Hence,pulsed current gas tungsten arc welding(PCGTAW) was performed,to yield finer fusion zone grains,which leads to higher strength of AA6061 (Al-Mg-Si) aluminium alloy joints.In order to determine the most influential control factors which will yield minimum fusion zone grain size and maximum tensile strength of the joints,the traditional Hooke and Jeeves pattern search method was used.The experiments were carried out based on central composite design with 31 runs and an algorithm was developed to optimize the fusion zone grain size and the tensile strength of pulsed current gas tungsten arc welded AA6061 aluminium alloy joints.The results indicate that the peak current (Ip) and base current (IB) are the most significant parameters,to decide the fusion zone grain size and the tensile strength of the AA6061 aluminum alloy joints.
文摘The selection of process parameter in the gas tungsten arc （GTA） welding of titanium alloy was presented for obtaining optimum grain size and hardness. Titanium alloy （Ti-6Al-4V） is one of the most important non-ferrous metals which offers great potential application in aerospace, biomedical and chemical industries, because of its low density （4.5 g/cm^3）, excellent corrosion resistance, high strength, attractive fracture behaviour and high melting point （1678℃）. The preferred welding process for titanium alloy is frequent GTA welding due to its comparatively easier applicability and better economy. In the case of single pass （GTA） welding of thinner section of this alloy, the pulsed current has been found beneficial due to its advantages over the conventional continuous current process. Many considerations come into the picture and one needs to carefully balance various pulse current parameters to reach an optimum combination. Four factors, five level, central composite, rotatable design matrix were used to optimize the required number of experimental conditions. Mathematical models were developed to predict the fusion zone grain size using analysis of variance （ANOVA） and regression analysis. The developed models were optimized using the traditional Hooke and Jeeve＇s algorithm. Experimental results were provided to illustrate the proposed approach.
