Hook defect is one of the trickiest issues for friction stir lap welding,which remains to be resolved.In this study,a designed pin with an enlarged-end was proposed to control the interfacial hook defect by optimizing...Hook defect is one of the trickiest issues for friction stir lap welding,which remains to be resolved.In this study,a designed pin with an enlarged-end was proposed to control the interfacial hook defect by optimizing its morphology orientation.The insert aduncous structure at the advancing side is dissected by multilayer metallographic observation,which is the main character to terminate the inner-ward extension of the hook.The application of this tool was verified practical with a varied plunge depth of pin into the lower plate from 0.1 mm to 1.6 mm.The angle of the hook was small and terminated at the insert-structure or oriented toward the material convergence region.No joint fractured along the hook line and the highest joint efficiency reached 86%of the parent 6082-T4 aluminum alloy.展开更多
To improve tensile-shear properties of fiction stir lap welded(FSLW) dissimilar Al/Mg joints, pin-tip profiles were innovatively designed and welding speed was optimized, and effects of them on formation, interface mi...To improve tensile-shear properties of fiction stir lap welded(FSLW) dissimilar Al/Mg joints, pin-tip profiles were innovatively designed and welding speed was optimized, and effects of them on formation, interface microstructure and mechanical properties of different FSLW joints were investigated. With increasing the welding speed, the tensile-shear load of FSLW joints produced by three pins presents an increasing firstly and then decreasing trend. Compared with Rpin, the hook and hole defect in the joints made by S-pin and T-pin are eliminated owing to additional eccentric force. Moreover, the joints obtained by T-pin at 75 mm/min have the highest tensile-shear load, and a maximum value of 3.425 kN is produced, which increases by 96.8%.Meanwhile, the pin-tip profile improves significantly the interface reaction depending on the welding temperature. For R-pin, thick brittle intermetallic compounds of about 6.9 μm Al3Mg2and 13.3 μm Al12Mg17layers at the welding interface derived from diffusion reaction are formed, resulting in continuous cracks. However, using T-pin can raise the interface temperature, and which makes the interface liquefy locally to generate only 2.2 μm Al3Mg2layer and dispersive(Al12-Mg17+Mg) eutectic structure. This can release high residual stress and remove welding crack, consequently enhancing the interface properties of T-pin joints.展开更多
With the addition of a thin Zn interlayer, 2.4 mm thick Mg-3AI-1Zn alloy sheets were friction stir spot welded （FSSW） using a pinless tool with fiat, convex and concave shoulder shapes. The results showed that an al...With the addition of a thin Zn interlayer, 2.4 mm thick Mg-3AI-1Zn alloy sheets were friction stir spot welded （FSSW） using a pinless tool with fiat, convex and concave shoulder shapes. The results showed that an alloying reaction took place between the Mg substrate and Zn interlayer during FSSW, forming a discontinuous intermetallics layer composed of dispersive （α-Mg ＋ MgZn） eutectic structure under- neath the shoulder and a Mg-Zn intermetallics bonding zone at the outside of the joints. This alloying reaction increased the bonded area and eliminated the hook defects, thereby producing sound FSSWjoints with a shallow keyhole without hook defects. The increase of plunge depth was beneficial to the Mg-Zn diffusion, thereby increasing the tensile-shear load of the joints. However, excessive plunge depths re- sulted in a decrease of the effective sheet thickness, reducing the strength of the joints. At a small plunge depth, the convex and concave shoulders were more beneficial to the interface reaction than the fiat shoul- der. The maximum joint load of 6.6 kN was achieved by using the concave shoulder at a plunge depth of 1.0 mm. A post-welding heat treatment promoted the dissolution of the discontinuous reaction layer in the joints; however, it led to the occurrence of void defects, influencing the bonding strength.展开更多
基金supported by the National Natural Science Foundation of China(No.51575132)。
文摘Hook defect is one of the trickiest issues for friction stir lap welding,which remains to be resolved.In this study,a designed pin with an enlarged-end was proposed to control the interfacial hook defect by optimizing its morphology orientation.The insert aduncous structure at the advancing side is dissected by multilayer metallographic observation,which is the main character to terminate the inner-ward extension of the hook.The application of this tool was verified practical with a varied plunge depth of pin into the lower plate from 0.1 mm to 1.6 mm.The angle of the hook was small and terminated at the insert-structure or oriented toward the material convergence region.No joint fractured along the hook line and the highest joint efficiency reached 86%of the parent 6082-T4 aluminum alloy.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.52005240 and 52164045)Young Talent Program of Major Disciplines of Academic and Technical Leaders in Jiangxi Province(No.20212BCJ23028)Key Laboratory Fund Project(No.EG202180417).
文摘To improve tensile-shear properties of fiction stir lap welded(FSLW) dissimilar Al/Mg joints, pin-tip profiles were innovatively designed and welding speed was optimized, and effects of them on formation, interface microstructure and mechanical properties of different FSLW joints were investigated. With increasing the welding speed, the tensile-shear load of FSLW joints produced by three pins presents an increasing firstly and then decreasing trend. Compared with Rpin, the hook and hole defect in the joints made by S-pin and T-pin are eliminated owing to additional eccentric force. Moreover, the joints obtained by T-pin at 75 mm/min have the highest tensile-shear load, and a maximum value of 3.425 kN is produced, which increases by 96.8%.Meanwhile, the pin-tip profile improves significantly the interface reaction depending on the welding temperature. For R-pin, thick brittle intermetallic compounds of about 6.9 μm Al3Mg2and 13.3 μm Al12Mg17layers at the welding interface derived from diffusion reaction are formed, resulting in continuous cracks. However, using T-pin can raise the interface temperature, and which makes the interface liquefy locally to generate only 2.2 μm Al3Mg2layer and dispersive(Al12-Mg17+Mg) eutectic structure. This can release high residual stress and remove welding crack, consequently enhancing the interface properties of T-pin joints.
基金supported by the National R&D Program of China under Grant No.2011BAE22B05Liaoning Province Doctor Startup Fund Program No.20131087the National Natural Science Foundation of China under Grant Nos.51371179 and 51331008
文摘With the addition of a thin Zn interlayer, 2.4 mm thick Mg-3AI-1Zn alloy sheets were friction stir spot welded （FSSW） using a pinless tool with fiat, convex and concave shoulder shapes. The results showed that an alloying reaction took place between the Mg substrate and Zn interlayer during FSSW, forming a discontinuous intermetallics layer composed of dispersive （α-Mg ＋ MgZn） eutectic structure under- neath the shoulder and a Mg-Zn intermetallics bonding zone at the outside of the joints. This alloying reaction increased the bonded area and eliminated the hook defects, thereby producing sound FSSWjoints with a shallow keyhole without hook defects. The increase of plunge depth was beneficial to the Mg-Zn diffusion, thereby increasing the tensile-shear load of the joints. However, excessive plunge depths re- sulted in a decrease of the effective sheet thickness, reducing the strength of the joints. At a small plunge depth, the convex and concave shoulders were more beneficial to the interface reaction than the fiat shoul- der. The maximum joint load of 6.6 kN was achieved by using the concave shoulder at a plunge depth of 1.0 mm. A post-welding heat treatment promoted the dissolution of the discontinuous reaction layer in the joints; however, it led to the occurrence of void defects, influencing the bonding strength.
