Neglecting the self-force, self-energy and radiative effects, we follow the spirit of Wald＇s gedanken experiment and further discuss whether an extremal Kerr-Newman-AdS （KNA） black hole can turn into a naked singul...Neglecting the self-force, self-energy and radiative effects, we follow the spirit of Wald＇s gedanken experiment and further discuss whether an extremal Kerr-Newman-AdS （KNA） black hole can turn into a naked singularity when it captures charged and spinning massive particles. It is found that feeding a test particle into an extremal KNA black hole could lead to a violation of cosmic censorship for the black hole.展开更多
Loess internal erosion caused by preferential flow often leads to serious loess ground collapse,shallow loess landslides,and other geological disasters.However,there is a lack of quantitative evaluation of the interna...Loess internal erosion caused by preferential flow often leads to serious loess ground collapse,shallow loess landslides,and other geological disasters.However,there is a lack of quantitative evaluation of the internal erodibility of undisturbed loess under the action of preferential flow,and little is known about the correlation between the internal erodibility of loess and its microstructure.In this study,we carried out a series of hole erosion tests(HET)on undisturbed loess samples from 4 typical locations on China's Loess Plateau.The internal erodibility of loess was quantitatively evaluated through an improved HET method,and its association with initial water content,clay content,and initial water head difference was investigated.On the microscopic scale,the microstructure of loess with different clay content was measured by scanning electron microscopy(SEM).The correlation between pore and particle microstructure parameters and loess internal erosion parameters was established based on grey correlation theory.When the initial water content increased from 10%to 36%,the erodibility index increased from 1 to 2.5.When the clay content increased from 8%to 27.95%,the erodibility index increased 3.5 times.The increase of initial water head difference has a positive linear effect on the internal erodibility of loess.The microstructure analysis shows that with the increase of clay content,the microstructure of undisturbed loess changes from a mosaic structure to a cementation structure,which creates favourable conditions for controlling the internal erosion of loess.Through grey correlation analysis,it has been determined that the microstructure of undisturbed loess has a significant correlation with the critical shear stress,and the loess microstructure morphology strongly correlates with the erosion rate.Under normal circumstances,the higher the clay content,the better the erosion resistance,the better the mechanical stability,and the easier to form a stable cave in loess.This study can provide a reference for revealing the cave formation mechanism in the loess area in the future.展开更多
To clarify the effects of the vertical angle of a conical punch on stretch flangeability, hole expansion forming tests were conducted. Test results showed that the hole expansion ratio becomes larger as the vertical a...To clarify the effects of the vertical angle of a conical punch on stretch flangeability, hole expansion forming tests were conducted. Test results showed that the hole expansion ratio becomes larger as the vertical angle decreases.Results also showed that the fracture strain at the fracture location on the hole edge was constant and independent of the vertical angle. This is because the hole expansion ratio was controlled not only by the fracture strain, which is independent of the vertical angle, but also by deformation uniformity along the hole edge. From the result of numerical analyses, it was determined that deformation uniformity depends on the gradient of circumferential stress along the radius direction. When the vertical angle is sharp, the circumferential stress showed a steep decline and the deformation localization was suppressed. Consequently, the hole edge deformed more uniformly and the hole expansion ratio became larger. It is concluded that in order to improve stretch flangeability of high strength steel, it is important to uniformly deform the hole edge by applying a conical punch with a sharp vertical angle.展开更多
Servo press forming machines are advanced forming systems that are capable of imparting interrupted punch motion,resulting in enhanced room temperature formability.The exact mechanism of the formability improvement is...Servo press forming machines are advanced forming systems that are capable of imparting interrupted punch motion,resulting in enhanced room temperature formability.The exact mechanism of the formability improvement is not yet established.The contribution of interrupted motion in the ductility improvement has been studied through stress relaxation phenomena in uniaxial tensile(UT)tests.However,the reason for improved formability observed when employing servo press is complicated due to the additional contribution from frictional effects.In the present work,an attempt is made to decouple the friction effect on formability improvement numerically.The improved formability is studied using a hole expansion test(HET).The limit of forming during hole expansion is modeled using the Hosford–Coulomb(HC)damage criteria,which is implemented as a user subroutine in a commercial explicit finite element(FE)software.Only the contribution of stress relaxation is accounted for in the evolution of the damage variable during interrupted loading.Therefore,the difference between simulation and experimental hole expansion ratio(HER)can be used to decouple the friction effect from the overall formability improvement during hole expansion.The improvement in HER due to stress relaxation and friction effect is different.The study showed that the model effectively captures the hole expansion deformation process in both monotonic and interrupted loading conditions.Compared to stress relaxation,friction effect played a major role during interrupted HET.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 11275099,11435006 and 11405130
文摘Neglecting the self-force, self-energy and radiative effects, we follow the spirit of Wald＇s gedanken experiment and further discuss whether an extremal Kerr-Newman-AdS （KNA） black hole can turn into a naked singularity when it captures charged and spinning massive particles. It is found that feeding a test particle into an extremal KNA black hole could lead to a violation of cosmic censorship for the black hole.
基金funded by the Natural Science Foundation of China(Grants No.42041006,42377158,42377163)the Provincial Key R&D Project(211426230324).
文摘Loess internal erosion caused by preferential flow often leads to serious loess ground collapse,shallow loess landslides,and other geological disasters.However,there is a lack of quantitative evaluation of the internal erodibility of undisturbed loess under the action of preferential flow,and little is known about the correlation between the internal erodibility of loess and its microstructure.In this study,we carried out a series of hole erosion tests(HET)on undisturbed loess samples from 4 typical locations on China's Loess Plateau.The internal erodibility of loess was quantitatively evaluated through an improved HET method,and its association with initial water content,clay content,and initial water head difference was investigated.On the microscopic scale,the microstructure of loess with different clay content was measured by scanning electron microscopy(SEM).The correlation between pore and particle microstructure parameters and loess internal erosion parameters was established based on grey correlation theory.When the initial water content increased from 10%to 36%,the erodibility index increased from 1 to 2.5.When the clay content increased from 8%to 27.95%,the erodibility index increased 3.5 times.The increase of initial water head difference has a positive linear effect on the internal erodibility of loess.The microstructure analysis shows that with the increase of clay content,the microstructure of undisturbed loess changes from a mosaic structure to a cementation structure,which creates favourable conditions for controlling the internal erosion of loess.Through grey correlation analysis,it has been determined that the microstructure of undisturbed loess has a significant correlation with the critical shear stress,and the loess microstructure morphology strongly correlates with the erosion rate.Under normal circumstances,the higher the clay content,the better the erosion resistance,the better the mechanical stability,and the easier to form a stable cave in loess.This study can provide a reference for revealing the cave formation mechanism in the loess area in the future.
文摘To clarify the effects of the vertical angle of a conical punch on stretch flangeability, hole expansion forming tests were conducted. Test results showed that the hole expansion ratio becomes larger as the vertical angle decreases.Results also showed that the fracture strain at the fracture location on the hole edge was constant and independent of the vertical angle. This is because the hole expansion ratio was controlled not only by the fracture strain, which is independent of the vertical angle, but also by deformation uniformity along the hole edge. From the result of numerical analyses, it was determined that deformation uniformity depends on the gradient of circumferential stress along the radius direction. When the vertical angle is sharp, the circumferential stress showed a steep decline and the deformation localization was suppressed. Consequently, the hole edge deformed more uniformly and the hole expansion ratio became larger. It is concluded that in order to improve stretch flangeability of high strength steel, it is important to uniformly deform the hole edge by applying a conical punch with a sharp vertical angle.
文摘Servo press forming machines are advanced forming systems that are capable of imparting interrupted punch motion,resulting in enhanced room temperature formability.The exact mechanism of the formability improvement is not yet established.The contribution of interrupted motion in the ductility improvement has been studied through stress relaxation phenomena in uniaxial tensile(UT)tests.However,the reason for improved formability observed when employing servo press is complicated due to the additional contribution from frictional effects.In the present work,an attempt is made to decouple the friction effect on formability improvement numerically.The improved formability is studied using a hole expansion test(HET).The limit of forming during hole expansion is modeled using the Hosford–Coulomb(HC)damage criteria,which is implemented as a user subroutine in a commercial explicit finite element(FE)software.Only the contribution of stress relaxation is accounted for in the evolution of the damage variable during interrupted loading.Therefore,the difference between simulation and experimental hole expansion ratio(HER)can be used to decouple the friction effect from the overall formability improvement during hole expansion.The improvement in HER due to stress relaxation and friction effect is different.The study showed that the model effectively captures the hole expansion deformation process in both monotonic and interrupted loading conditions.Compared to stress relaxation,friction effect played a major role during interrupted HET.
