During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the i...During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the installation process,and studied the impact of different lifting and lowering speeds on the hoisting system under the same environmental conditions through numerical simulation.The results show that during the lifting operation,as the lifting speed increases,the swing motion of the substation and the installation vessel tends to decrease,and the faster the hoisting speed,the more obvious the swing suppression of the substation and the installation vessel,and the smaller the fluctuation in the tension amplitude of the slings and mooring lines.In contrast,during the lowering operation,as the lowering speed increases,the swing motion of the substation and the installation vessel tends to increase,and the faster the lowering speed,the more obvious the swing amplification effect of the substation and the installation vessel.Therefore,during hoisting operations,increasing the lifting speed and reducing the lowering speed can mitigate the motion performance of the hoisting coupling system,reduce the tension amplitude variation of the sling and mooring,and ensure the smooth progress of the hoisting operation.展开更多
Due to the shortage of non-renewable energy in the world, China has started to vigorously develop nuclear power construction in recent years. With the introduction of the concept of "modularization" for plan...Due to the shortage of non-renewable energy in the world, China has started to vigorously develop nuclear power construction in recent years. With the introduction of the concept of "modularization" for plant construction, a single nuclear island is divided into several hundred modules for operation. Due to its particularity, nuclear power has put forward more stringent requirements on hoisting technology. The concept of "integral zero deformation" has greatly increased the difficulty of hoisting, especially for large eccentric flexible structures such as cylinder, the control of deformation is of great significance and far-reaching impact on the docking of adjacent modules. Reasonable hoisting technology is a strong guarantee for subsequent safety construction.展开更多
Combined with the experimental results from the large tunnel of the ChongqingResearch Institute,the mechanism of gas and coal dust explosion was studied.Someconcepts about gas and coal dust explosion were introduced s...Combined with the experimental results from the large tunnel of the ChongqingResearch Institute,the mechanism of gas and coal dust explosion was studied.Someconcepts about gas and coal dust explosion were introduced such as the form conditionand influential factors.Gas and coal dust explosion propagation was researched and thelifting process of coal dust was simulated.When an explosion occurred due to great mixtureof gas and air,the maximum explosion pressure appeared in the neighborhood of theexplosion source point.Before it propagated to the tunnel of the deposited coal dust,themaximum explosion pressure appeared to be in declining trend.Part of the energy waslost in the process of raising the deposited coal dust through a shock wave,so the maximumexplosion pressure was smallest on the foreside of the deposited coal dust sector.On the deposited coal dust sector,the explosion pressure rapidly increased and droppedoff after achieving the largest peak value.Because of coal dust participation in the explosion,the flame velocity rose rapidly on the deposited coal dust and achieved a basic stablevalue;coal dust was ignited to explode by initial laminar flame,and the laminar flametransformed into turbulent flame.The turbulence transformed the flame fold into a funnelshape and the shock wave interacted with the flame,so the combustion rate rose and thepressure wave was further enhanced.The regeneration mechanism between the flamecombustion rate and the aerodynamic flowing structure achieved the final critical state forforming the detonation.展开更多
基金support from the National Natural Science Foundation of China(No.52271287)funding from the State Key Laboratory of Hydraulic Engineering Intelligent Construction and Operation,Tianjin University。
文摘During the hoisting process of the offshore substation,changes in the hoisting speed can affect the hoisting system.Therefore,this study set four different speed conditions for the lifting and lowering stages of the installation process,and studied the impact of different lifting and lowering speeds on the hoisting system under the same environmental conditions through numerical simulation.The results show that during the lifting operation,as the lifting speed increases,the swing motion of the substation and the installation vessel tends to decrease,and the faster the hoisting speed,the more obvious the swing suppression of the substation and the installation vessel,and the smaller the fluctuation in the tension amplitude of the slings and mooring lines.In contrast,during the lowering operation,as the lowering speed increases,the swing motion of the substation and the installation vessel tends to increase,and the faster the lowering speed,the more obvious the swing amplification effect of the substation and the installation vessel.Therefore,during hoisting operations,increasing the lifting speed and reducing the lowering speed can mitigate the motion performance of the hoisting coupling system,reduce the tension amplitude variation of the sling and mooring,and ensure the smooth progress of the hoisting operation.
文摘Due to the shortage of non-renewable energy in the world, China has started to vigorously develop nuclear power construction in recent years. With the introduction of the concept of "modularization" for plant construction, a single nuclear island is divided into several hundred modules for operation. Due to its particularity, nuclear power has put forward more stringent requirements on hoisting technology. The concept of "integral zero deformation" has greatly increased the difficulty of hoisting, especially for large eccentric flexible structures such as cylinder, the control of deformation is of great significance and far-reaching impact on the docking of adjacent modules. Reasonable hoisting technology is a strong guarantee for subsequent safety construction.
基金Supported by the National Basic Research Program(973)(2005CB221506)National Natural Science Foundation of Chongqing(CSTC,2007BA6018)National Key Technology R&D Program(2006ABK03B04)
文摘Combined with the experimental results from the large tunnel of the ChongqingResearch Institute,the mechanism of gas and coal dust explosion was studied.Someconcepts about gas and coal dust explosion were introduced such as the form conditionand influential factors.Gas and coal dust explosion propagation was researched and thelifting process of coal dust was simulated.When an explosion occurred due to great mixtureof gas and air,the maximum explosion pressure appeared in the neighborhood of theexplosion source point.Before it propagated to the tunnel of the deposited coal dust,themaximum explosion pressure appeared to be in declining trend.Part of the energy waslost in the process of raising the deposited coal dust through a shock wave,so the maximumexplosion pressure was smallest on the foreside of the deposited coal dust sector.On the deposited coal dust sector,the explosion pressure rapidly increased and droppedoff after achieving the largest peak value.Because of coal dust participation in the explosion,the flame velocity rose rapidly on the deposited coal dust and achieved a basic stablevalue;coal dust was ignited to explode by initial laminar flame,and the laminar flametransformed into turbulent flame.The turbulence transformed the flame fold into a funnelshape and the shock wave interacted with the flame,so the combustion rate rose and thepressure wave was further enhanced.The regeneration mechanism between the flamecombustion rate and the aerodynamic flowing structure achieved the final critical state forforming the detonation.
