As battery technology evolves and demand for efficient energy storage solutions,aqueous zinc ion batteries(AZIBs)have garnered significant attention due to their safety and environmental benefits.However,the stability...As battery technology evolves and demand for efficient energy storage solutions,aqueous zinc ion batteries(AZIBs)have garnered significant attention due to their safety and environmental benefits.However,the stability of cathode materials under high-voltage conditions remains a critical challenge in improving its energy density.This review systematically explores the failure mechanisms of high-voltage cathode materials in AZIBs,including hydrogen evolution reaction,phase transformation and dissolution phenomena.To address these challenges,we propose a range of advanced strategies aimed at improving the stability of cathode materials.These strategies include surface coating and doping techniques designed to fortify the surface properties and structure integrity of the cathode materials under high-voltage conditions.Additionally,we emphasize the importance of designing antioxidant electrolytes,with a focus on understanding and optimizing electrolyte decomposition mechanisms.The review also highlights the significance of modifying conductive agents and employing innovative separators to further enhance the stability of AZIBs.By integrating these cutting-edge approaches,this review anticipates substantial advancements in the stability of high-voltage cathode materials,paving the way for the broader application and development of AZIBs in energy storage.展开更多
This article introduces a novel 20 V radiation-hardened high-voltage metal-oxide-semiconductor field-effect transistor(MOSFET)driver with an optimized input circuit and a drain-surrounding-source(DSS)structure.The inp...This article introduces a novel 20 V radiation-hardened high-voltage metal-oxide-semiconductor field-effect transistor(MOSFET)driver with an optimized input circuit and a drain-surrounding-source(DSS)structure.The input circuit of a conventional inverter consists of a thick-gate-oxide n-type MOSFET(NMOS).These conventional drivers can tolerate a total ionizing dose(TID)of up to 100 krad(Si).In contrast,the proposed comparator input circuit uses both a thick-gate-oxide p-type MOSFET(PMOS)and thin-gate-oxide NMOS to offer a high input voltage and higher TID tolerance.Because the thick-gate-oxide PMOS and thin-gate-oxide NMOS collectively provide better TID tolerance than the thick-gate-oxide NMOS,the circuit exhibits enhanced TID tolerance of>300 krad(Si).Simulations and experimental date indicate that the DSS structure reduces the probability of unwanted parasitic bipolar junction transistor activation,yielding a better single-event effect tolerance of over 81.8 MeVcm^(2)mg^(-1).The innovative strategy proposed in this study involves circuit and layout design optimization,and does not require any specialized process flow.Hence,the proposed circuit can be manufactured using common commercial 0.35μm BCD processes.展开更多
Expanding the cutoff voltage of layered oxide cathodes for sodium-ion batteries(SIBs)is crucial for overcoming their existing energy density limitations.However,cationic/anodic redox-triggered multiple phase transitio...Expanding the cutoff voltage of layered oxide cathodes for sodium-ion batteries(SIBs)is crucial for overcoming their existing energy density limitations.However,cationic/anodic redox-triggered multiple phase transitions and unfavorable interfacial side reactions accelerate capacity and voltage decay.Herein,we present a straightforward melting plus reactive wetting strategy using H_(3)BO_(3)for surface modification of O_(3)-type Na_(0.9)Cu_(0.12)Ni_(0.33)Mn_(0.4)Ti_(0.15)O_(2)(CNMT).The transformation of H_(3)BO_(3)from solid to liquid under mild heating facilitates the uniform dispersion and complete surface coverage of CNMT particles.By neutralizing the residual alkali and extracting Na^(+)from the CNMT lattice,H_(3)BO_(3)forms a multifunctional Na_(2)B_(2)O_(5)-dominated layer on the CNMT surface.This Na_(x)B_(y)O_(z)(NBO)layer plays a positive role in providing low-barrier Na^(+)transport channels,suppressing phase transitions,and minimizing the generation of O_(2)/CO_(2)gases and resistive byproducts.As a result,at a charge cutoff voltage of 4.5 V,the NBO-coated CNMT delivers a high discharge capacity of 149,1 mAh g^(-1)at 10 mA g^(-1)and exhibits excellent cycling stability at 100 mA g^(-1)over 200 cycles with a higher capacity retention than that of pristine CNMT(86,4%vs,62.1%).This study highlights the effectiveness of surface modification using lowmelting-point solid acids,with potential applications for other layered oxide cathode materials to achieve stable high-voltage cycling.This proposed strategy opens new avenues for the construction of highquality coatings for high-voltage layered oxide cathodes in SIBs.展开更多
With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist i...With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist in the field testing methodologies for wave energy converters(WECs).In this paper,a numerical wave field of the Dawanshan Island Sea Area in Zhuhai City is constructed based on the MIKE21 SW wave model and by using an NCEP wind field driving model.In conjunction with the IEC-62600-100 standard,by taking site testing of the“Wanshan”wave energy converter on which a sea trial has been conducted in Dawanshan Island of Zhuhai city as an example,research on-site testing method for a wave energy converter has been carried out.The wave measurement position for the“Wanshan”converter was determined by combining statistically analyzed field data with a validated numerical wave model.By comparing a valid wave height at the position where a wave rider is located with a valid wave height at the position where the“Wanshan”wave energy converter is situated,the correlation coefficient between simulation and observed data reached 0.90,with a root-mean-square error of 0.19.The representativeness of wave measurement data during site testing is verified and can be used as a basis for calculating the input energy of the“Wanshan”wave energy converter.展开更多
Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the su...Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.展开更多
Point-of-care testing(POCT)refers to a category of diagnostic tests that are performed at or near to the site of the patients(also called bedside testing)and is capable of obtaining accurate results in a short time by...Point-of-care testing(POCT)refers to a category of diagnostic tests that are performed at or near to the site of the patients(also called bedside testing)and is capable of obtaining accurate results in a short time by using portable diagnostic devices,avoiding sending samples to the medical laboratories.It has been extensively explored for diagnosing and monitoring patients’diseases and health conditions with the assistance of development in biochemistry and microfluidics.Microfluidic paper-based analytical devices(μPADs)have gained dramatic popularity in POCT because of their simplicity,user-friendly,fast and accurate result reading and low cost.SeveralμPADs have been successfully commercialized and received excellent feedback during the past several decades.This review briefly discusses the main types ofμPADs,preparation methods and their detection principles,followed by a few representative examples.The future perspectives of the development inμPADs are also provided.展开更多
Thermal batteries are a type of thermally activated reserve battery,where the cathode material significantly influences the operating voltage and specific capacity.In this work,Cu_(2)O–CuO nanowires are prepared by i...Thermal batteries are a type of thermally activated reserve battery,where the cathode material significantly influences the operating voltage and specific capacity.In this work,Cu_(2)O–CuO nanowires are prepared by in-situ thermal oxidation method onto Cu foam,which are further coated with a carbon layer derived from polydopamine(PDA).The morphology of the nanowires has been examined using scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The material shows a kind of core–shell structure,with CuO as the shell and Cu_(2)O as the core.To further explore the interaction between the material and lithium-ion(Li^(+)),the Lit adsorption energies of CuO and Cu_(2)O were calculated,revealing a stronger affinity of Li^(+) for CuO.The unique core–shell nanowire structure of Cu_(2)O–CuO can provide a good Li^(+)adsorption with the outer layer CuO and excellent structural stability with the inner layer Cu_(2)O.When applied in thermal batteries,Cu_(2)O–CuO–C nanowires exhibit specific capacity and specific energy of 326 mAh g^(-1)and 697 Wh kg^(-1)at a cut-off voltage of 1.5 V both of which are higher than those of Cu_(2)O–CuO(238 mAh g^(-1)and 445 Wh kg^(-1)).The discharge process includes the insertion of lithium ions and subsequent reduction reactions,ultimately resulting in the formation of lithium oxide and copper.展开更多
Penetration testing plays a critical role in ensuring security in an increasingly interconnected world. Despite advancements in technology leading to smaller, more portable devices, penetration testing remains reliant...Penetration testing plays a critical role in ensuring security in an increasingly interconnected world. Despite advancements in technology leading to smaller, more portable devices, penetration testing remains reliant on traditional laptops and computers, which, while portable, lack true ultra-portability. This paper explores the potential impact of developing a dedicated, ultra-portable, low-cost device for on-the-go penetration testing. Such a device could replicate the core functionalities of advanced penetration testing tools, including those found in Kali Linux, within a compact form factor that fits easily into a pocket. By offering the convenience and portability akin to a smartphone, this innovative device could redefine the way penetration testers operate, enabling them to carry essential tools wherever they go and ensuring they are always prepared to conduct security assessments efficiently. This approach aims to revolutionize penetration testing by merging high functionality with unparalleled portability.展开更多
This paper focuses on the high-voltage safety of drive motor systems in new energy vehicles and conducts standardized research on functional safety design in the concept phase. In view of the lack of high-voltage haza...This paper focuses on the high-voltage safety of drive motor systems in new energy vehicles and conducts standardized research on functional safety design in the concept phase. In view of the lack of high-voltage hazard analysis for drive motor systems in existing standards, based on theories such as GB/T 34590 and ISO 26262, the safety levels are deeply analyzed. The HAZOP method is innovatively used, and 16 types of guidewords are combined to comprehensively analyze the system functions, identifying vehicle hazards such as high-voltage electric shock caused by functional abnormalities, including high-voltage interlock function failure and abnormal active discharge. Subsequently, safety goals such as preventing high-voltage electric shock are set, functional safety requirements such as accurately obtaining collision signals and timely discharging high-voltage electricity are formulated, and requirements for external signal sources and other technologies are clearly defined, constructing a complete high-voltage safety protection system. The research results provide important technical support and standardized references for the high-voltage safety functional design of drive motor systems in new energy vehicles, and are of great significance for improving the high-voltage safety level of the new energy vehicle industry, expecting to play a key role in subsequent product development and standard improvement.展开更多
Geomechanical properties of rocks vary across different measurement scales,primarily due to heterogeneity.Micro-scale geomechanical tests,including micro-scale“scratch tests”and nano-scale nanoindentation tests,are ...Geomechanical properties of rocks vary across different measurement scales,primarily due to heterogeneity.Micro-scale geomechanical tests,including micro-scale“scratch tests”and nano-scale nanoindentation tests,are attractive at different scales.Each method requires minimal sample volume,is low cost,and includes a relatively rapid measurement turnaround time.However,recent micro-scale test results–including scratch test results and nanoindentation results–exhibit tangible variance and uncertainty,suggesting a need to correlate mineral composition mapping to elastic modulus mapping to isolate the relative impact of specific minerals.Different research labs often utilize different interpretation methods,and it is clear that future micro-mechanical tests may benefit from standardized testing and interpretation procedures.The objectives of this study are to seek options for standardized testing and interpretation procedures,through two specific objectives:(1)Quantify chemical and physical controls on micro-mechanical properties and(2)Quantify the source of uncertainties associated with nanoindentation measurements.To reach these goals,we conducted mechanical tests on three different scales:triaxial compression tests,scratch tests,and nanoindentation tests.We found that mineral phase weight percentage is highly correlated with nanoindentation elastic modulus distribution.Finally,we conclude that nanoindentation testing is a mineralogy and microstructure-based method and generally yields significant uncertainty and overestimation.The uncertainty of the testing method is largely associated with not mapping pore space a priori.Lastly,the uncertainty can be reduced by combining phase mapping and modulus mapping with substantial and random data sampling.展开更多
High-voltage solid-state lithium-ion batteries(SSLIBs)have attracted considerable research attention in recent years due to their high-energy-density and superior safety characteristics.However,the integration of high...High-voltage solid-state lithium-ion batteries(SSLIBs)have attracted considerable research attention in recent years due to their high-energy-density and superior safety characteristics.However,the integration of high-voltage cathodes with solid electrolytes(SEs)presents multiple challenges,including the formation of high-impedance layers from spontaneous chemical reactions,electrochemical instability,insufficient interfacial contact,and lattice expansion.These issues significantly impair battery performance and potentially lead to battery failure,thus impeding the commercialization of high-voltage SSLIBs.The incorporation of fluorides,known for their robust bond strength and high free energy of formation,has emerged as an effective strategy to address these challenges.Fluorinated electrolytes and electrode/electrolyte interfaces have been demonstrated to significantly influence the reaction reversibility/kinetics,safety,and stability of rechargeable batteries,particularly under high voltage.This review summarizes recent advancements in fluorination treatment for high-voltage SEs,focusing on solid polymer electrolytes(SPEs),inorganic solid electrolytes(ISEs),and composite solid electrolytes(CSEs),along with the performance enhancements these strategies afford.This review aims to provide a comprehensive understanding of the structure-property relationships,the characteristics of fluorinated interfaces,and the application of fluorinated SEs in high-voltage SSLIBs.Further,the impacts of residual moisture and the challenges of fluorinated SEs are discussed.Finally,the review explores potential future directions for the development of fluorinated SSLIBs.展开更多
Enhancing the energy density of lithium-ion batteries through high-voltage cathodes holds great pro-mise.However,traditional carbonate-based electrolytes face significant challenges due to limited oxida-tive stability...Enhancing the energy density of lithium-ion batteries through high-voltage cathodes holds great pro-mise.However,traditional carbonate-based electrolytes face significant challenges due to limited oxida-tive stability and poor compatibility with high-nickel materials.This study introduces a novel electrolyte that combines bis(triethoxysilyl)methane(DMSP)as the sole solvent with lithium bis(fluorosulfonyl)imide(LiFSI)as the lithium salt.This formulation significantly improves the stability of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathodes and graphite anodes.The capacity retention of the NCM811 elec-trode increases from 5%to 95%after 1000 cycles at 1 C(3.0-4.5 V),while that of the graphite anode is improved from 22%to 92%after 400 cycles at 0.2 C(0.005-3.0 V).The NCM811//graphite pouch cell exhibits enhanced retention,rising from 12%to 66%at 25℃and from 3%to 65%at 60℃after 300 cycles at 0.2 C.Spectroscopic characterization and theoretical calculations reveal that the steric hindrance of the Si-O-CH_(3)groups in DMSP creates a weakly solvating structure,promoting the formation of Lit^(+)-FSI^(-)ion pairs and aggregation clusters,which enriches the electrode interphase with LiF,Li_(3)N,and Li_(2)SO_(3).Furthermore,DMSP with abundant Si-O effectively enhances the elasticity of the interphase layer,scav-enging harmful substances such as HF and suppressing gas evolution and transition metal dissolution.The simplicity of the DMSP-based electrolyte formulation,coupled with its superior performance,ensures scalability for large-scale manufacturing and practical application in the high-voltage battery.This work provides critical insights into improving interfacial chemistry and addressing compatibility issues in high-voltageNi-rich cathodes.展开更多
Li/Mn-rich layered oxide(LMR)cathode active materials offer remarkably high specific discharge capacity(>250 mAh g^(-1))from both cationic and anionic redox.The latter necessitates harsh charging conditions to high...Li/Mn-rich layered oxide(LMR)cathode active materials offer remarkably high specific discharge capacity(>250 mAh g^(-1))from both cationic and anionic redox.The latter necessitates harsh charging conditions to high cathode potentials(>4.5 V vs Li|Li^(+)),which is accompanied by lattice oxygen release,phase transformation,voltage fade,and transition metal(TM)dissolution.In cells with graphite anode,TM dissolution is particularly detrimental as it initiates electrode crosstalk.Lithium difluorophosphate(LiDFP)is known for its pivotal role in suppressing electrode crosstalk through TM scavenging.In LMR‖graphite cells charged to an upper cutoff voltage(UCV)of 4.5 V,effective TM scavenging effects of LiDFP are observed.In contrast,for an UCV of 4.7 V,the scavenging effects are limited due to more severe TM dissolution compared an UCV of 4.5V.Given the saturation in solubility of the TM scavenging agents,which are LiDFP decomposition products,e.g.,PO_(4)^(3-) and PO_(3)F^(2-),higher concentrations of the LiDFP as precursor"cannot enhance the amount of scavenging species,they rather start to precipitate and damage the anode.展开更多
Solid-state batteries(SSBs) are highly attractive on account of their high energy density and good safety.In high-voltage and high-current conditions,however,the interface reactions,structural changes,and decompositio...Solid-state batteries(SSBs) are highly attractive on account of their high energy density and good safety.In high-voltage and high-current conditions,however,the interface reactions,structural changes,and decomposition of the electrolyte impede the transmission of lithium ions in all-solid-state lithium batteries(ASSLBs),significantly reducing the charging and discharging capacity and cycling stability of the battery and therefore restricting its practical applications.The main content of review is to conduct an in-depth analysis of the existing problems of solid-state batteries from the aspects of interface reactions,material failure,ion migration,and dendrite growth,and points out the main factors influencing the electrochemical performance of ASSLBs.Additionally,the compatibility and ion conduction mechanisms between polymer electrolytes,inorganic solid electrolytes,and composite electrolytes and the electrode materials are discussed.Furthermore,the perspectives of electrode materials,electrolyte properties,and interface modification are summarized and prospected,providing new optimization directions for the future commercialization of high-voltage solid-state electrolytes.展开更多
Weakly solvating electrolyte(WSE)demonstrates superior compatibility with lithium(Li)metal batteries(LMBs).However,its application in fast-charging high-voltage LMBs is challenging.Here,we propose a diluent modified W...Weakly solvating electrolyte(WSE)demonstrates superior compatibility with lithium(Li)metal batteries(LMBs).However,its application in fast-charging high-voltage LMBs is challenging.Here,we propose a diluent modified WSE for fast-charging high-voltage LMBs,which is formed by adding diluent of 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether(TTE)into the tetrahydropyran(THP)based WSE.A relatively loose solvation structure is formed due to the formation of weak hydrogen bond between TTE and THP,which accelerates the de-solvation kinetics of Li~+.Besides,more anions are involved in solvation structure in the presence of TTE,yielding inorganic-rich interphases with improved stability.Li(30μm)||Li Ni_(0.5)Co_(0.2)Mn_(0.3)O_(2)(4.1 mAh/cm^(2))batteries with the TTE modified WSE retain over 64%capacity retention after 175 cycles under high rate of 3 C and high-voltage of 4.5 V,much better than that with pure THP based WSE.This work points out that the combination of diluent with weakly solvating solvent is a promising approach to develop high performance electrolytes for fast-charging high-voltage LMBs.展开更多
P2-type layered oxide Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)(NM)is a promising cathode material for sodium-ion batteries(SIBs).However,the severe irreversible phase transition,sluggish Na+diffusion kinetics,and interfacial sid...P2-type layered oxide Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)(NM)is a promising cathode material for sodium-ion batteries(SIBs).However,the severe irreversible phase transition,sluggish Na+diffusion kinetics,and interfacial side reactions at high-voltage result in grievous capacity degradation and inferior electrochemical performance.Herein,a dual-function strategy of entropy tuning and artificial cathode electrolyte interface(CEI)layer construction is reported to generate a novel P2-type medium-entropy Na_(0.75)Li_(0.1)Mg_(0.05)Ni_(0.18)Mn_(0.66)Ta_(0.01)O_(2)with NaTaO_(3)surface modification(LMNMT)to address the aforementioned issues.In situ X-ray diffraction reveals that LMNMT exhibits a near zero-strain phase transition with a volume change of only 1.4%,which is significantly lower than that of NM(20.9%),indicating that entropy tuning effectively suppresses irreversible phase transitions and enhances ion diffusion.Kinetic analysis and post-cycling interfacial characterization further confirm that the artificial CEI layer promotes the formation of a stable,thin NaF-rich CEI and reduces interfacial side reactions,thereby further enhancing ion transport kinetics and surface/interface stability.Consequently,the LMNMT electrode exhibits outstanding rate capability(46 mA h g^(−1)at 20 C)and cycling stability(89.5%capacity retention after 200 cycles at 2 C)within the voltage range of 2–4.35 V.The LMNMT also exhibits superior all-climate performance and air stability.This study provides a novel path for the design of high-voltage cathode materials for SIBs.展开更多
The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSN...The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSNS-II)commenced in 2024.The CSNS-II linac design primarily involves the addition of a radio-frequency ion source and a section of a superconducting linear accelerator composed of two types of superconducting cavities,namely double-spoke and six-cell elliptical cavities,after the drift tube linac(DTL).The development of the double-spoke superconducting cavity began in early 2021,and by January 2023,the welding,post-processing,and vertical tests of two 324 MHz double-spoke cavity prototypes were completed,with vertical test gradients of 11.6 and 15 MV/m,and Q_(0)≥3×10^(10)@E_(acc)≤10 MV/m.The R&D of the cryomodule began in January 2022.In October 2023,the clean assembly of the double-spoke cavity string and cold mass installation of the cryomodule commenced,with the installation of the cryomodule and valve box completing in two months.In January 2024,a horizontal test of the cryomodule was completed,making it the first double-spoke cavity cryomodule in China.The test results showed that the maximum gradients of the two superconducting cavities at a pulse width of 4 ms and repetition frequency of 25 Hz were 12.8 and 15.2 MV/m,respectively.This article provides a detailed introduction to the double-spoke superconducting cavity,tuner,coupler,and cryomodule,elaborates on the clean assembly of the cavity string and cold mass installation of the cryomodule,and provides a detailed analysis of the horizontal test results.展开更多
Efficient,safe,and reliable energy output from high-energy-density lithium metal batteries(LMBs)at all climates is crucial for portable electronic devices operating in complex environments.The performance of correspon...Efficient,safe,and reliable energy output from high-energy-density lithium metal batteries(LMBs)at all climates is crucial for portable electronic devices operating in complex environments.The performance of corresponding cathodes and lithium(Li)metal anodes,however,faces significant challenges under such demanding conditions.Herein,a nonflammable electrolyte for high-voltage Li‖LCO cells has been designed,including partially-fluorinated ethyl 4,4,4-trifluorobutyrate(ETFB)as the key solvent,guided by theoretical calculations.With this ETFB-based electrolyte,Li‖LCO cells exhibit enhanced reversible capacities and superior capacity retention at an elevated charge voltage of 4.5 V and a wide operating temperature range spanning from-60℃to 70℃.The cells achieve 67.1%discharge capacity at-60℃,relative to room temperature capacity,and 85.9%100th-cycle retention at 70℃.The outstanding properties are attributed to the LiF-rich interphases formed in the ETFB-based electrolyte with a finetuned solvation structure,in which the coordination environment in the vicinity of Li^(+)cations and the distance between anion and solvents are subtly adjusted by introducing ETFB.This solvation structure has been mutually elucidated through joint spectra characterizations and atomistic simulations.This work presents a new strategy for the design of electrolytes to achieve all-climate reliable and safe application of LMBs.展开更多
In recent years,the application scenarios of electrical and electronic products have become increasingly diverse worldwide.The impact of climatic environmental tests on the performance of related products has attracte...In recent years,the application scenarios of electrical and electronic products have become increasingly diverse worldwide.The impact of climatic environmental tests on the performance of related products has attracted much attention,and formulating scientific and reasonable environmental test plans has become an important step to ensure product quality and reliability.展开更多
Sodium-ion batteries are the prominent device for stationary energy storage system and low-speed electric vehicles.However,the practical application is still limited by the unsatisfied performance and high cost of the...Sodium-ion batteries are the prominent device for stationary energy storage system and low-speed electric vehicles.However,the practical application is still limited by the unsatisfied performance and high cost of the cathode side,which strictly requires the development of high voltage,high capacity,and earth-abundant cathode material.Ni-Fe-Mn ternary layered oxide has been recognized as one of the most promising standard type of cathodes.However,the composition and phase structure on high-voltage characteristics have not been well investigated.Herein,selecting the typically high-voltage cathode of P2-Na_(0.67)Ni_(0.33)Mn_(0.67)O_(2)as a parent material,we fabricate ten Ni-Fe-Mn ternary layered oxides through replacing the Ni,Mn,or both Ni and Mn by Fe.The thermodynamically stable phase diagram for those materials is presented.The electrochemical properties for all the samples are investigated in detail.Three potential Ni-Fe-Mn ternary layered oxides are picked up considering the energy density,cycle stability,kinetics,cost price,and working voltage,which demonstrate great potential for surpassing the performance of lithium iron phosphate.The related electrochemical reaction and fading mechanism are well revealed.This work provides some new foundational Ni-Fe-Mn ternary layered materials for high-voltage sodium-ion batteries.展开更多
基金supported by the Exchange Program of Highend Foreign Experts of Ministry of Science and Technology of People’s Republic of China(No.G2023041003L)the Natural Science Foundation of Shaanxi Provincial Department of Education(No.23JK0367)+1 种基金the Scientific Research Startup Program for Introduced Talents of Shaanxi University of Technology(Nos.SLGRCQD2208,SLGRCQD2306,SLGRCQD2133)Contaminated Soil Remediation and Resource Utilization Innovation Team at Shaanxi University of Technology。
文摘As battery technology evolves and demand for efficient energy storage solutions,aqueous zinc ion batteries(AZIBs)have garnered significant attention due to their safety and environmental benefits.However,the stability of cathode materials under high-voltage conditions remains a critical challenge in improving its energy density.This review systematically explores the failure mechanisms of high-voltage cathode materials in AZIBs,including hydrogen evolution reaction,phase transformation and dissolution phenomena.To address these challenges,we propose a range of advanced strategies aimed at improving the stability of cathode materials.These strategies include surface coating and doping techniques designed to fortify the surface properties and structure integrity of the cathode materials under high-voltage conditions.Additionally,we emphasize the importance of designing antioxidant electrolytes,with a focus on understanding and optimizing electrolyte decomposition mechanisms.The review also highlights the significance of modifying conductive agents and employing innovative separators to further enhance the stability of AZIBs.By integrating these cutting-edge approaches,this review anticipates substantial advancements in the stability of high-voltage cathode materials,paving the way for the broader application and development of AZIBs in energy storage.
基金supported by the National Natural Science Foundation of China(U2241221).
文摘This article introduces a novel 20 V radiation-hardened high-voltage metal-oxide-semiconductor field-effect transistor(MOSFET)driver with an optimized input circuit and a drain-surrounding-source(DSS)structure.The input circuit of a conventional inverter consists of a thick-gate-oxide n-type MOSFET(NMOS).These conventional drivers can tolerate a total ionizing dose(TID)of up to 100 krad(Si).In contrast,the proposed comparator input circuit uses both a thick-gate-oxide p-type MOSFET(PMOS)and thin-gate-oxide NMOS to offer a high input voltage and higher TID tolerance.Because the thick-gate-oxide PMOS and thin-gate-oxide NMOS collectively provide better TID tolerance than the thick-gate-oxide NMOS,the circuit exhibits enhanced TID tolerance of>300 krad(Si).Simulations and experimental date indicate that the DSS structure reduces the probability of unwanted parasitic bipolar junction transistor activation,yielding a better single-event effect tolerance of over 81.8 MeVcm^(2)mg^(-1).The innovative strategy proposed in this study involves circuit and layout design optimization,and does not require any specialized process flow.Hence,the proposed circuit can be manufactured using common commercial 0.35μm BCD processes.
基金supported by the National Natural Science Foundation of China(22169002 and 22469003)the Chongzuo Key Research and Development Program of China(20241205 and 20231204)the Counterpart Aid Project for Discipline Construction from Guangxi University(2023M02)。
文摘Expanding the cutoff voltage of layered oxide cathodes for sodium-ion batteries(SIBs)is crucial for overcoming their existing energy density limitations.However,cationic/anodic redox-triggered multiple phase transitions and unfavorable interfacial side reactions accelerate capacity and voltage decay.Herein,we present a straightforward melting plus reactive wetting strategy using H_(3)BO_(3)for surface modification of O_(3)-type Na_(0.9)Cu_(0.12)Ni_(0.33)Mn_(0.4)Ti_(0.15)O_(2)(CNMT).The transformation of H_(3)BO_(3)from solid to liquid under mild heating facilitates the uniform dispersion and complete surface coverage of CNMT particles.By neutralizing the residual alkali and extracting Na^(+)from the CNMT lattice,H_(3)BO_(3)forms a multifunctional Na_(2)B_(2)O_(5)-dominated layer on the CNMT surface.This Na_(x)B_(y)O_(z)(NBO)layer plays a positive role in providing low-barrier Na^(+)transport channels,suppressing phase transitions,and minimizing the generation of O_(2)/CO_(2)gases and resistive byproducts.As a result,at a charge cutoff voltage of 4.5 V,the NBO-coated CNMT delivers a high discharge capacity of 149,1 mAh g^(-1)at 10 mA g^(-1)and exhibits excellent cycling stability at 100 mA g^(-1)over 200 cycles with a higher capacity retention than that of pristine CNMT(86,4%vs,62.1%).This study highlights the effectiveness of surface modification using lowmelting-point solid acids,with potential applications for other layered oxide cathode materials to achieve stable high-voltage cycling.This proposed strategy opens new avenues for the construction of highquality coatings for high-voltage layered oxide cathodes in SIBs.
基金supported by the“National Ocean Technology Center Innovation Fund”under Project No.N3220Z002,led by Ning Jia.The official website of the National Ocean Technology Center is accessible at:http://www.notcsoa.org.cn/.
文摘With the depletion of fossil fuels and increasing environmental concerns,the development of renewable energy,such as wave energy,has become a critical component of global energy strategies.However,challenges persist in the field testing methodologies for wave energy converters(WECs).In this paper,a numerical wave field of the Dawanshan Island Sea Area in Zhuhai City is constructed based on the MIKE21 SW wave model and by using an NCEP wind field driving model.In conjunction with the IEC-62600-100 standard,by taking site testing of the“Wanshan”wave energy converter on which a sea trial has been conducted in Dawanshan Island of Zhuhai city as an example,research on-site testing method for a wave energy converter has been carried out.The wave measurement position for the“Wanshan”converter was determined by combining statistically analyzed field data with a validated numerical wave model.By comparing a valid wave height at the position where a wave rider is located with a valid wave height at the position where the“Wanshan”wave energy converter is situated,the correlation coefficient between simulation and observed data reached 0.90,with a root-mean-square error of 0.19.The representativeness of wave measurement data during site testing is verified and can be used as a basis for calculating the input energy of the“Wanshan”wave energy converter.
基金supported by the National Natural Science Foundation of China for Distinguished Young Scholars(Grant No.42225206)National Natural Science Foundation of China(42207180,42477209,42302320).
文摘Subgrade engineering is a fundamental aspect of infrastructure construction in China.As the primary structural element responsible for bearing and distributing traffic loads,the subgrade must not only withstand the substantial pressures exerted by vehicles,trains,and other forms of transportation,but also efficiently transfer these loads to the underlying foundation,ensuring the stability and longevity of the roadway.In recent years,advancements in subgrade engineering technology have propelled the industry towards smarter,greener,and more sustainable practices,particularly in the areas of intelligent monitoring,disaster management,and innovative construction methods.This paper reviews the application and methodologies of intelligent testing equipment,including cone penetration testing(CPT)devices,soil resistivity testers,and intelligent rebound testers,in subgrade engineering.It examines the operating principles,advantages,limitations,and application ranges of these tools in subgrade testing.Additionally,the paper evaluates the practical use of advanced equipment from both domestic and international perspectives,addressing the challenges encountered by various instruments in realworld applications.These devices enable precise,comprehensive testing and evaluation of subgrade conditions at different stages,providing real-time data analysis and intelligent early warnings.This supports effective subgrade health management and maintenance.As intelligent technologies continue to evolve and integrate,these tools will increasingly enhance the accuracy,efficiency,and sustainability of subgrade monitoring.
文摘Point-of-care testing(POCT)refers to a category of diagnostic tests that are performed at or near to the site of the patients(also called bedside testing)and is capable of obtaining accurate results in a short time by using portable diagnostic devices,avoiding sending samples to the medical laboratories.It has been extensively explored for diagnosing and monitoring patients’diseases and health conditions with the assistance of development in biochemistry and microfluidics.Microfluidic paper-based analytical devices(μPADs)have gained dramatic popularity in POCT because of their simplicity,user-friendly,fast and accurate result reading and low cost.SeveralμPADs have been successfully commercialized and received excellent feedback during the past several decades.This review briefly discusses the main types ofμPADs,preparation methods and their detection principles,followed by a few representative examples.The future perspectives of the development inμPADs are also provided.
基金supported by National Natural Science Foundation of China(Nos.52374298)National Natural Science Foundation of Chongqing(Nos.CSTB2023NSCQ-MSX0662)Beijing Natural Science Foundation(Nos.L243019).
文摘Thermal batteries are a type of thermally activated reserve battery,where the cathode material significantly influences the operating voltage and specific capacity.In this work,Cu_(2)O–CuO nanowires are prepared by in-situ thermal oxidation method onto Cu foam,which are further coated with a carbon layer derived from polydopamine(PDA).The morphology of the nanowires has been examined using scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The material shows a kind of core–shell structure,with CuO as the shell and Cu_(2)O as the core.To further explore the interaction between the material and lithium-ion(Li^(+)),the Lit adsorption energies of CuO and Cu_(2)O were calculated,revealing a stronger affinity of Li^(+) for CuO.The unique core–shell nanowire structure of Cu_(2)O–CuO can provide a good Li^(+)adsorption with the outer layer CuO and excellent structural stability with the inner layer Cu_(2)O.When applied in thermal batteries,Cu_(2)O–CuO–C nanowires exhibit specific capacity and specific energy of 326 mAh g^(-1)and 697 Wh kg^(-1)at a cut-off voltage of 1.5 V both of which are higher than those of Cu_(2)O–CuO(238 mAh g^(-1)and 445 Wh kg^(-1)).The discharge process includes the insertion of lithium ions and subsequent reduction reactions,ultimately resulting in the formation of lithium oxide and copper.
文摘Penetration testing plays a critical role in ensuring security in an increasingly interconnected world. Despite advancements in technology leading to smaller, more portable devices, penetration testing remains reliant on traditional laptops and computers, which, while portable, lack true ultra-portability. This paper explores the potential impact of developing a dedicated, ultra-portable, low-cost device for on-the-go penetration testing. Such a device could replicate the core functionalities of advanced penetration testing tools, including those found in Kali Linux, within a compact form factor that fits easily into a pocket. By offering the convenience and portability akin to a smartphone, this innovative device could redefine the way penetration testers operate, enabling them to carry essential tools wherever they go and ensuring they are always prepared to conduct security assessments efficiently. This approach aims to revolutionize penetration testing by merging high functionality with unparalleled portability.
文摘This paper focuses on the high-voltage safety of drive motor systems in new energy vehicles and conducts standardized research on functional safety design in the concept phase. In view of the lack of high-voltage hazard analysis for drive motor systems in existing standards, based on theories such as GB/T 34590 and ISO 26262, the safety levels are deeply analyzed. The HAZOP method is innovatively used, and 16 types of guidewords are combined to comprehensively analyze the system functions, identifying vehicle hazards such as high-voltage electric shock caused by functional abnormalities, including high-voltage interlock function failure and abnormal active discharge. Subsequently, safety goals such as preventing high-voltage electric shock are set, functional safety requirements such as accurately obtaining collision signals and timely discharging high-voltage electricity are formulated, and requirements for external signal sources and other technologies are clearly defined, constructing a complete high-voltage safety protection system. The research results provide important technical support and standardized references for the high-voltage safety functional design of drive motor systems in new energy vehicles, and are of great significance for improving the high-voltage safety level of the new energy vehicle industry, expecting to play a key role in subsequent product development and standard improvement.
基金support of this project through the Southwest Regional Partnership on Carbon Sequestration(Grant No.DE-FC26-05NT42591)Improving Production in the Emerging Paradox Oil Play(Grant No.DE-FE0031775).
文摘Geomechanical properties of rocks vary across different measurement scales,primarily due to heterogeneity.Micro-scale geomechanical tests,including micro-scale“scratch tests”and nano-scale nanoindentation tests,are attractive at different scales.Each method requires minimal sample volume,is low cost,and includes a relatively rapid measurement turnaround time.However,recent micro-scale test results–including scratch test results and nanoindentation results–exhibit tangible variance and uncertainty,suggesting a need to correlate mineral composition mapping to elastic modulus mapping to isolate the relative impact of specific minerals.Different research labs often utilize different interpretation methods,and it is clear that future micro-mechanical tests may benefit from standardized testing and interpretation procedures.The objectives of this study are to seek options for standardized testing and interpretation procedures,through two specific objectives:(1)Quantify chemical and physical controls on micro-mechanical properties and(2)Quantify the source of uncertainties associated with nanoindentation measurements.To reach these goals,we conducted mechanical tests on three different scales:triaxial compression tests,scratch tests,and nanoindentation tests.We found that mineral phase weight percentage is highly correlated with nanoindentation elastic modulus distribution.Finally,we conclude that nanoindentation testing is a mineralogy and microstructure-based method and generally yields significant uncertainty and overestimation.The uncertainty of the testing method is largely associated with not mapping pore space a priori.Lastly,the uncertainty can be reduced by combining phase mapping and modulus mapping with substantial and random data sampling.
基金supported by the A*STAR MTC Programmatic Project(No.M23L9b0052)the Indonesia-NTU Singapore Institute of Research for Sustainability and Innovation(INSPIRASI)(No.6635/E3/KL.02.02/2023)+2 种基金the Singapore NRF Singapore-China Flagship Program(No.023740-00001)the National Natural Science Foundation of China(Nos.11975043 and 11475300)the China Scholarship Council(No.202306460087)。
文摘High-voltage solid-state lithium-ion batteries(SSLIBs)have attracted considerable research attention in recent years due to their high-energy-density and superior safety characteristics.However,the integration of high-voltage cathodes with solid electrolytes(SEs)presents multiple challenges,including the formation of high-impedance layers from spontaneous chemical reactions,electrochemical instability,insufficient interfacial contact,and lattice expansion.These issues significantly impair battery performance and potentially lead to battery failure,thus impeding the commercialization of high-voltage SSLIBs.The incorporation of fluorides,known for their robust bond strength and high free energy of formation,has emerged as an effective strategy to address these challenges.Fluorinated electrolytes and electrode/electrolyte interfaces have been demonstrated to significantly influence the reaction reversibility/kinetics,safety,and stability of rechargeable batteries,particularly under high voltage.This review summarizes recent advancements in fluorination treatment for high-voltage SEs,focusing on solid polymer electrolytes(SPEs),inorganic solid electrolytes(ISEs),and composite solid electrolytes(CSEs),along with the performance enhancements these strategies afford.This review aims to provide a comprehensive understanding of the structure-property relationships,the characteristics of fluorinated interfaces,and the application of fluorinated SEs in high-voltage SSLIBs.Further,the impacts of residual moisture and the challenges of fluorinated SEs are discussed.Finally,the review explores potential future directions for the development of fluorinated SSLIBs.
基金supported by the National Natural Science Foundation of China (Grant No. 22179041)the Guangzhou Science and Technology Plan Project (Grant No. 2024A04J4354)the Guangdong Basic and Applied Basic Research Foundation (Grant No. 2024A1515010034)
文摘Enhancing the energy density of lithium-ion batteries through high-voltage cathodes holds great pro-mise.However,traditional carbonate-based electrolytes face significant challenges due to limited oxida-tive stability and poor compatibility with high-nickel materials.This study introduces a novel electrolyte that combines bis(triethoxysilyl)methane(DMSP)as the sole solvent with lithium bis(fluorosulfonyl)imide(LiFSI)as the lithium salt.This formulation significantly improves the stability of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathodes and graphite anodes.The capacity retention of the NCM811 elec-trode increases from 5%to 95%after 1000 cycles at 1 C(3.0-4.5 V),while that of the graphite anode is improved from 22%to 92%after 400 cycles at 0.2 C(0.005-3.0 V).The NCM811//graphite pouch cell exhibits enhanced retention,rising from 12%to 66%at 25℃and from 3%to 65%at 60℃after 300 cycles at 0.2 C.Spectroscopic characterization and theoretical calculations reveal that the steric hindrance of the Si-O-CH_(3)groups in DMSP creates a weakly solvating structure,promoting the formation of Lit^(+)-FSI^(-)ion pairs and aggregation clusters,which enriches the electrode interphase with LiF,Li_(3)N,and Li_(2)SO_(3).Furthermore,DMSP with abundant Si-O effectively enhances the elasticity of the interphase layer,scav-enging harmful substances such as HF and suppressing gas evolution and transition metal dissolution.The simplicity of the DMSP-based electrolyte formulation,coupled with its superior performance,ensures scalability for large-scale manufacturing and practical application in the high-voltage battery.This work provides critical insights into improving interfacial chemistry and addressing compatibility issues in high-voltageNi-rich cathodes.
基金the Ministry for Culture and Science of North Rhine Westphalia(Germany)for funding this work within the International Graduate School for Battery Chemistry,Characterization,Analysis,Recycling,and Application(BACCARA)Open Access funding enabled and organized by Projekt DEAL。
文摘Li/Mn-rich layered oxide(LMR)cathode active materials offer remarkably high specific discharge capacity(>250 mAh g^(-1))from both cationic and anionic redox.The latter necessitates harsh charging conditions to high cathode potentials(>4.5 V vs Li|Li^(+)),which is accompanied by lattice oxygen release,phase transformation,voltage fade,and transition metal(TM)dissolution.In cells with graphite anode,TM dissolution is particularly detrimental as it initiates electrode crosstalk.Lithium difluorophosphate(LiDFP)is known for its pivotal role in suppressing electrode crosstalk through TM scavenging.In LMR‖graphite cells charged to an upper cutoff voltage(UCV)of 4.5 V,effective TM scavenging effects of LiDFP are observed.In contrast,for an UCV of 4.7 V,the scavenging effects are limited due to more severe TM dissolution compared an UCV of 4.5V.Given the saturation in solubility of the TM scavenging agents,which are LiDFP decomposition products,e.g.,PO_(4)^(3-) and PO_(3)F^(2-),higher concentrations of the LiDFP as precursor"cannot enhance the amount of scavenging species,they rather start to precipitate and damage the anode.
基金financial support received from the National Key R&D Program of China (2023YFB2504000)the financial support from the National Outstanding Youth Foundation of China (52125104)+2 种基金the National Natural Science Foundation of China (52071285)the Fundamental Research Funds for the Central Universities (226-2024-00075)the National Youth Top-Notch Talent Support Program。
文摘Solid-state batteries(SSBs) are highly attractive on account of their high energy density and good safety.In high-voltage and high-current conditions,however,the interface reactions,structural changes,and decomposition of the electrolyte impede the transmission of lithium ions in all-solid-state lithium batteries(ASSLBs),significantly reducing the charging and discharging capacity and cycling stability of the battery and therefore restricting its practical applications.The main content of review is to conduct an in-depth analysis of the existing problems of solid-state batteries from the aspects of interface reactions,material failure,ion migration,and dendrite growth,and points out the main factors influencing the electrochemical performance of ASSLBs.Additionally,the compatibility and ion conduction mechanisms between polymer electrolytes,inorganic solid electrolytes,and composite electrolytes and the electrode materials are discussed.Furthermore,the perspectives of electrode materials,electrolyte properties,and interface modification are summarized and prospected,providing new optimization directions for the future commercialization of high-voltage solid-state electrolytes.
基金supported by Hengyang City,Hunan Province Science and Technology Innovation Project(No.202250045319)the National Natural Science Foundation of China(Nos.11375084,21808125)the Scientific Research Planning Project of Jilin Provincial Education Department(No.JJKH20241249KJ)。
文摘Weakly solvating electrolyte(WSE)demonstrates superior compatibility with lithium(Li)metal batteries(LMBs).However,its application in fast-charging high-voltage LMBs is challenging.Here,we propose a diluent modified WSE for fast-charging high-voltage LMBs,which is formed by adding diluent of 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether(TTE)into the tetrahydropyran(THP)based WSE.A relatively loose solvation structure is formed due to the formation of weak hydrogen bond between TTE and THP,which accelerates the de-solvation kinetics of Li~+.Besides,more anions are involved in solvation structure in the presence of TTE,yielding inorganic-rich interphases with improved stability.Li(30μm)||Li Ni_(0.5)Co_(0.2)Mn_(0.3)O_(2)(4.1 mAh/cm^(2))batteries with the TTE modified WSE retain over 64%capacity retention after 175 cycles under high rate of 3 C and high-voltage of 4.5 V,much better than that with pure THP based WSE.This work points out that the combination of diluent with weakly solvating solvent is a promising approach to develop high performance electrolytes for fast-charging high-voltage LMBs.
基金supported by the National Natural Science Foundation of China(52272295,52071137,51977071,51802040,and 21802020)the Science and Technology Innovation Program of Hunan Province(2021RC3066 and 2021RC3067)+2 种基金the Natural Science Foundation of Hunan Province(2020JJ3004 and 2020JJ4192)Graduate Research Innovation Project of Hunan Province(CX20240456 and CX20240405)N.Zhang and X.Xie also acknowledge the financial support of the Fundamental Research Funds for the Central。
文摘P2-type layered oxide Na_(2/3)Ni_(1/3)Mn_(2/3)O_(2)(NM)is a promising cathode material for sodium-ion batteries(SIBs).However,the severe irreversible phase transition,sluggish Na+diffusion kinetics,and interfacial side reactions at high-voltage result in grievous capacity degradation and inferior electrochemical performance.Herein,a dual-function strategy of entropy tuning and artificial cathode electrolyte interface(CEI)layer construction is reported to generate a novel P2-type medium-entropy Na_(0.75)Li_(0.1)Mg_(0.05)Ni_(0.18)Mn_(0.66)Ta_(0.01)O_(2)with NaTaO_(3)surface modification(LMNMT)to address the aforementioned issues.In situ X-ray diffraction reveals that LMNMT exhibits a near zero-strain phase transition with a volume change of only 1.4%,which is significantly lower than that of NM(20.9%),indicating that entropy tuning effectively suppresses irreversible phase transitions and enhances ion diffusion.Kinetic analysis and post-cycling interfacial characterization further confirm that the artificial CEI layer promotes the formation of a stable,thin NaF-rich CEI and reduces interfacial side reactions,thereby further enhancing ion transport kinetics and surface/interface stability.Consequently,the LMNMT electrode exhibits outstanding rate capability(46 mA h g^(−1)at 20 C)and cycling stability(89.5%capacity retention after 200 cycles at 2 C)within the voltage range of 2–4.35 V.The LMNMT also exhibits superior all-climate performance and air stability.This study provides a novel path for the design of high-voltage cathode materials for SIBs.
文摘The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSNS-II)commenced in 2024.The CSNS-II linac design primarily involves the addition of a radio-frequency ion source and a section of a superconducting linear accelerator composed of two types of superconducting cavities,namely double-spoke and six-cell elliptical cavities,after the drift tube linac(DTL).The development of the double-spoke superconducting cavity began in early 2021,and by January 2023,the welding,post-processing,and vertical tests of two 324 MHz double-spoke cavity prototypes were completed,with vertical test gradients of 11.6 and 15 MV/m,and Q_(0)≥3×10^(10)@E_(acc)≤10 MV/m.The R&D of the cryomodule began in January 2022.In October 2023,the clean assembly of the double-spoke cavity string and cold mass installation of the cryomodule commenced,with the installation of the cryomodule and valve box completing in two months.In January 2024,a horizontal test of the cryomodule was completed,making it the first double-spoke cavity cryomodule in China.The test results showed that the maximum gradients of the two superconducting cavities at a pulse width of 4 ms and repetition frequency of 25 Hz were 12.8 and 15.2 MV/m,respectively.This article provides a detailed introduction to the double-spoke superconducting cavity,tuner,coupler,and cryomodule,elaborates on the clean assembly of the cavity string and cold mass installation of the cryomodule,and provides a detailed analysis of the horizontal test results.
基金the financial support from Projects of Science&Technology Department of Sichuan Province(Grant No.22023YFG0082,Grant No.2023YFG0096,and Grant No.2023ZHJY0019)Chengdu Science and Technology Projects(Grant No.2024-YF08-00062-GX).
文摘Efficient,safe,and reliable energy output from high-energy-density lithium metal batteries(LMBs)at all climates is crucial for portable electronic devices operating in complex environments.The performance of corresponding cathodes and lithium(Li)metal anodes,however,faces significant challenges under such demanding conditions.Herein,a nonflammable electrolyte for high-voltage Li‖LCO cells has been designed,including partially-fluorinated ethyl 4,4,4-trifluorobutyrate(ETFB)as the key solvent,guided by theoretical calculations.With this ETFB-based electrolyte,Li‖LCO cells exhibit enhanced reversible capacities and superior capacity retention at an elevated charge voltage of 4.5 V and a wide operating temperature range spanning from-60℃to 70℃.The cells achieve 67.1%discharge capacity at-60℃,relative to room temperature capacity,and 85.9%100th-cycle retention at 70℃.The outstanding properties are attributed to the LiF-rich interphases formed in the ETFB-based electrolyte with a finetuned solvation structure,in which the coordination environment in the vicinity of Li^(+)cations and the distance between anion and solvents are subtly adjusted by introducing ETFB.This solvation structure has been mutually elucidated through joint spectra characterizations and atomistic simulations.This work presents a new strategy for the design of electrolytes to achieve all-climate reliable and safe application of LMBs.
文摘In recent years,the application scenarios of electrical and electronic products have become increasingly diverse worldwide.The impact of climatic environmental tests on the performance of related products has attracted much attention,and formulating scientific and reasonable environmental test plans has become an important step to ensure product quality and reliability.
基金financially supported by the National Natural Science Foundation of China(Grant No.52402215)the Anhui Provincial Natural Science Foundation(2408085QB036)+1 种基金the Natural Science Research Project of Anhui Province Education Department(Grant Nos.2022AH050334,2022AH030046,2023AH051119)the Scientific Research Foundation of Anhui University of Technology for Talent Introduction(DT2200001211)。
文摘Sodium-ion batteries are the prominent device for stationary energy storage system and low-speed electric vehicles.However,the practical application is still limited by the unsatisfied performance and high cost of the cathode side,which strictly requires the development of high voltage,high capacity,and earth-abundant cathode material.Ni-Fe-Mn ternary layered oxide has been recognized as one of the most promising standard type of cathodes.However,the composition and phase structure on high-voltage characteristics have not been well investigated.Herein,selecting the typically high-voltage cathode of P2-Na_(0.67)Ni_(0.33)Mn_(0.67)O_(2)as a parent material,we fabricate ten Ni-Fe-Mn ternary layered oxides through replacing the Ni,Mn,or both Ni and Mn by Fe.The thermodynamically stable phase diagram for those materials is presented.The electrochemical properties for all the samples are investigated in detail.Three potential Ni-Fe-Mn ternary layered oxides are picked up considering the energy density,cycle stability,kinetics,cost price,and working voltage,which demonstrate great potential for surpassing the performance of lithium iron phosphate.The related electrochemical reaction and fading mechanism are well revealed.This work provides some new foundational Ni-Fe-Mn ternary layered materials for high-voltage sodium-ion batteries.
