As battery technology evolves and demand for efficient energy storage solutions,aqueous zinc ion batteries(AZIBs)have garnered significant attention due to their safety and environmental benefits.However,the stability...As battery technology evolves and demand for efficient energy storage solutions,aqueous zinc ion batteries(AZIBs)have garnered significant attention due to their safety and environmental benefits.However,the stability of cathode materials under high-voltage conditions remains a critical challenge in improving its energy density.This review systematically explores the failure mechanisms of high-voltage cathode materials in AZIBs,including hydrogen evolution reaction,phase transformation and dissolution phenomena.To address these challenges,we propose a range of advanced strategies aimed at improving the stability of cathode materials.These strategies include surface coating and doping techniques designed to fortify the surface properties and structure integrity of the cathode materials under high-voltage conditions.Additionally,we emphasize the importance of designing antioxidant electrolytes,with a focus on understanding and optimizing electrolyte decomposition mechanisms.The review also highlights the significance of modifying conductive agents and employing innovative separators to further enhance the stability of AZIBs.By integrating these cutting-edge approaches,this review anticipates substantial advancements in the stability of high-voltage cathode materials,paving the way for the broader application and development of AZIBs in energy storage.展开更多
This article introduces a novel 20 V radiation-hardened high-voltage metal-oxide-semiconductor field-effect transistor(MOSFET)driver with an optimized input circuit and a drain-surrounding-source(DSS)structure.The inp...This article introduces a novel 20 V radiation-hardened high-voltage metal-oxide-semiconductor field-effect transistor(MOSFET)driver with an optimized input circuit and a drain-surrounding-source(DSS)structure.The input circuit of a conventional inverter consists of a thick-gate-oxide n-type MOSFET(NMOS).These conventional drivers can tolerate a total ionizing dose(TID)of up to 100 krad(Si).In contrast,the proposed comparator input circuit uses both a thick-gate-oxide p-type MOSFET(PMOS)and thin-gate-oxide NMOS to offer a high input voltage and higher TID tolerance.Because the thick-gate-oxide PMOS and thin-gate-oxide NMOS collectively provide better TID tolerance than the thick-gate-oxide NMOS,the circuit exhibits enhanced TID tolerance of>300 krad(Si).Simulations and experimental date indicate that the DSS structure reduces the probability of unwanted parasitic bipolar junction transistor activation,yielding a better single-event effect tolerance of over 81.8 MeVcm^(2)mg^(-1).The innovative strategy proposed in this study involves circuit and layout design optimization,and does not require any specialized process flow.Hence,the proposed circuit can be manufactured using common commercial 0.35μm BCD processes.展开更多
Expanding the cutoff voltage of layered oxide cathodes for sodium-ion batteries(SIBs)is crucial for overcoming their existing energy density limitations.However,cationic/anodic redox-triggered multiple phase transitio...Expanding the cutoff voltage of layered oxide cathodes for sodium-ion batteries(SIBs)is crucial for overcoming their existing energy density limitations.However,cationic/anodic redox-triggered multiple phase transitions and unfavorable interfacial side reactions accelerate capacity and voltage decay.Herein,we present a straightforward melting plus reactive wetting strategy using H_(3)BO_(3)for surface modification of O_(3)-type Na_(0.9)Cu_(0.12)Ni_(0.33)Mn_(0.4)Ti_(0.15)O_(2)(CNMT).The transformation of H_(3)BO_(3)from solid to liquid under mild heating facilitates the uniform dispersion and complete surface coverage of CNMT particles.By neutralizing the residual alkali and extracting Na^(+)from the CNMT lattice,H_(3)BO_(3)forms a multifunctional Na_(2)B_(2)O_(5)-dominated layer on the CNMT surface.This Na_(x)B_(y)O_(z)(NBO)layer plays a positive role in providing low-barrier Na^(+)transport channels,suppressing phase transitions,and minimizing the generation of O_(2)/CO_(2)gases and resistive byproducts.As a result,at a charge cutoff voltage of 4.5 V,the NBO-coated CNMT delivers a high discharge capacity of 149,1 mAh g^(-1)at 10 mA g^(-1)and exhibits excellent cycling stability at 100 mA g^(-1)over 200 cycles with a higher capacity retention than that of pristine CNMT(86,4%vs,62.1%).This study highlights the effectiveness of surface modification using lowmelting-point solid acids,with potential applications for other layered oxide cathode materials to achieve stable high-voltage cycling.This proposed strategy opens new avenues for the construction of highquality coatings for high-voltage layered oxide cathodes in SIBs.展开更多
Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects s...Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.展开更多
Lithium-ion capacitors(LICs)combine the high power dens-ity of electrical double-layer capacitors with the high energy density of lithium-ion batteries.However,they face practical limitations due to the narrow operati...Lithium-ion capacitors(LICs)combine the high power dens-ity of electrical double-layer capacitors with the high energy density of lithium-ion batteries.However,they face practical limitations due to the narrow operating voltage window of their activated carbon(AC)cathodes.We report a scalable thermal treatment strategy to develop high-voltage-tolerant AC cathodes.Through controlled thermal treatment of commer-cial activated carbon(Raw-AC)under a H_(2)/Ar atmosphere at 400-800℃,the targeted reduction of degradation-prone functional groups can be achieved while preserving the critical pore structure and increasing graph-itic microcrystalline ordering.The AC treated at 400℃(HAC-400)had a significant increase in specific capacity(96.0 vs.75.1 mAh/g at 0.05 A/g)and better rate capability(61.1 vs.36.1 mAh/g at 5 A/g)in half-cell LICs,along with an 83.5%capacity retention over 7400 cycles within an extended voltage range of 2.0-4.2 V in full-cell LICs.Scalability was demonstrated by a 120 g batch production,enabling fabrication of pouch-type LICs with commercial hard carbon anodes that delivered a higher energy density of 28.3 Wh/kg at 1 C,and a peak power density of 12.1 kW/kg compared to devices using raw AC.This simple,industry-compatible approach may be used for producing ad-vanced cathode materials for practical high-performance LICs.展开更多
In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology bas...In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology based on the principle of high-throughput sequencing,and established a multi-locus 10 animalderived components identification method of cattle,goat,sheep,donkey,horse,chicken,duck,goose,pigeon,quail in meat and meat products.The specific loci of each species could be detected and the species could be accurately identified,including 5 loci for cattle and duck,3 loci for sheep,9 loci for chicken and horse,10 loci for goose and pigeon,6 loci for quail and 1 locus for donkey and goat,and an adulteration model was established to simulate commercially available samples.The results showed that the method established in this study had high throughput,good repeatability and accuracy,and was able to identify 10 animalderived components simultaneously with 100%repeatability accuracy.The detection limit was 0.1%(m/m)in simulated samples of chicken,duck and horse.Using the method established in this study to test commercially available samples,4 samples from 14 commercially available samples were detected to be inconsistent with the labels,of which 2 did not contain the target ingredient and 2 were adulterated with small amounts of other ingredients.展开更多
Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC...Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC is a nonlinear system with a lot of overlapping information.In this paper,a dataset of eight roughness statistical parameters covering 112 digital joints is established.Then,the principal component analysis method is introduced to extract the significant information,which solves the information overlap problem of roughness characterization.Based on the two principal components of extracted features,the white shark optimizer algorithm was introduced to optimize the extreme gradient boosting model,and a new machine learning(ML)prediction model was established.The prediction accuracy of the new model and the other 17 models was measured using statistical metrics.The results show that the prediction result of the new model is more consistent with the real JRC value,with higher recognition accuracy and generalization ability.展开更多
Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants h...Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.展开更多
Restoration of phase aberrations is crucial for addressing atmospheric turbulence in light propagation.Traditional restoration algorithms based on Zernike polynomials(ZPs)often encounter challenges related to high com...Restoration of phase aberrations is crucial for addressing atmospheric turbulence in light propagation.Traditional restoration algorithms based on Zernike polynomials(ZPs)often encounter challenges related to high computational complexity and insufficient capture of high-frequency phase aberration components,so we proposed a Principal-Component-Analysis-based method for representing phase aberrations.This paper discusses the factors influencing the accuracy of restoration,mainly including the sample space size and the sampling interval of D/r_(0),on the basis of characterizing phase aberrations by Principal Components(PCs).The experimental results show that a larger D/r_(0)sampling interval can ensure the generalization ability and robustness of the principal components in the case of a limited amount of original data,which can help to achieve high-precision deployment of the model in practical applications quickly.In the environment with relatively strong turbulence in the test set of D/r_(0)=24,the use of 34 terms of PCs can improve the corrected Strehl ratio(SR)from 0.007 to 0.1585,while the Strehl ratio of the light spot after restoration using 34 terms of ZPs is only 0.0215,demonstrating almost no correction effect.The results indicate that PCs can serve as a better alternative in representing and restoring the characteristics of atmospheric turbulence induced phase aberrations.These findings pave the way to use PCs of phase aberrations with fewer terms than traditional ZPs to achieve data dimensionality reduction,and offer a reference to accelerate and stabilize the model and deep learning based adaptive optics correction.展开更多
Thermal batteries are a type of thermally activated reserve battery,where the cathode material significantly influences the operating voltage and specific capacity.In this work,Cu_(2)O–CuO nanowires are prepared by i...Thermal batteries are a type of thermally activated reserve battery,where the cathode material significantly influences the operating voltage and specific capacity.In this work,Cu_(2)O–CuO nanowires are prepared by in-situ thermal oxidation method onto Cu foam,which are further coated with a carbon layer derived from polydopamine(PDA).The morphology of the nanowires has been examined using scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The material shows a kind of core–shell structure,with CuO as the shell and Cu_(2)O as the core.To further explore the interaction between the material and lithium-ion(Li^(+)),the Lit adsorption energies of CuO and Cu_(2)O were calculated,revealing a stronger affinity of Li^(+) for CuO.The unique core–shell nanowire structure of Cu_(2)O–CuO can provide a good Li^(+)adsorption with the outer layer CuO and excellent structural stability with the inner layer Cu_(2)O.When applied in thermal batteries,Cu_(2)O–CuO–C nanowires exhibit specific capacity and specific energy of 326 mAh g^(-1)and 697 Wh kg^(-1)at a cut-off voltage of 1.5 V both of which are higher than those of Cu_(2)O–CuO(238 mAh g^(-1)and 445 Wh kg^(-1)).The discharge process includes the insertion of lithium ions and subsequent reduction reactions,ultimately resulting in the formation of lithium oxide and copper.展开更多
Objective: The present research aims to determine if adherence to the Lewinnek safe zone, when exclusively considered, constitutes a pivotal element for ensuring stability in the context of total hip arthroplasty. Thi...Objective: The present research aims to determine if adherence to the Lewinnek safe zone, when exclusively considered, constitutes a pivotal element for ensuring stability in the context of total hip arthroplasty. This is done by examining the acetabular placement in instances of hip dislocation after total hip arthroplasty (THA). Methodology: The authors searched 2653 patient records from 2015 to 2022 looking for patients who had total hip arthroplasty at our facility. For the analysis, 23 patients were culled from 64 individuals who exhibited post-THA dislocations, employing a stringent exclusion criterion, and the resultant acetabular angulation and anteversion were quantified utilizing PEEKMED software (Peek Health S.A., Portugal) upon radiographic evidence. Results: Within the operational timeframe, from the cohort of 2653 subjects, 64 presented with at least a singular incident of displacement. Post-exclusion criterion enforcement, 23 patients were eligible for inclusion. Of these, 10 patients conformed to the safe zone demarcated by Lewinnek for both inclination and anteversion angles, while 13 exhibited deviations from the prescribed anteversion and/or inclination benchmarks. Conclusion: Analysis of the 23 patients reveals that 13 did not confirm to be in the safe zone parameters for anteversion and/or inclination, whereas 10 were within the safe zone as per Lewinnek’s guidelines. This investigative review, corroborated by extant literature, suggests that the isolated consideration of the Lewinnek safe zone does not suffice as a solitary protective factor. It further posits that additional variables are equally critical as acetabular positioning and mandate individual assessment.展开更多
Dear Editor,Local recurrence and cervical lymph node metastases are major causes of mortality in patients with head and neck squamous cell carcinoma(HNSCC).To date,none of the proposed strategies for predicting outcom...Dear Editor,Local recurrence and cervical lymph node metastases are major causes of mortality in patients with head and neck squamous cell carcinoma(HNSCC).To date,none of the proposed strategies for predicting outcomes in this disease have proven fully effective,and a comprehensive physical examination remains the primary method for early detection and monitoring of HNSCC.展开更多
This paper focuses on the high-voltage safety of drive motor systems in new energy vehicles and conducts standardized research on functional safety design in the concept phase. In view of the lack of high-voltage haza...This paper focuses on the high-voltage safety of drive motor systems in new energy vehicles and conducts standardized research on functional safety design in the concept phase. In view of the lack of high-voltage hazard analysis for drive motor systems in existing standards, based on theories such as GB/T 34590 and ISO 26262, the safety levels are deeply analyzed. The HAZOP method is innovatively used, and 16 types of guidewords are combined to comprehensively analyze the system functions, identifying vehicle hazards such as high-voltage electric shock caused by functional abnormalities, including high-voltage interlock function failure and abnormal active discharge. Subsequently, safety goals such as preventing high-voltage electric shock are set, functional safety requirements such as accurately obtaining collision signals and timely discharging high-voltage electricity are formulated, and requirements for external signal sources and other technologies are clearly defined, constructing a complete high-voltage safety protection system. The research results provide important technical support and standardized references for the high-voltage safety functional design of drive motor systems in new energy vehicles, and are of great significance for improving the high-voltage safety level of the new energy vehicle industry, expecting to play a key role in subsequent product development and standard improvement.展开更多
High-voltage solid-state lithium-ion batteries(SSLIBs)have attracted considerable research attention in recent years due to their high-energy-density and superior safety characteristics.However,the integration of high...High-voltage solid-state lithium-ion batteries(SSLIBs)have attracted considerable research attention in recent years due to their high-energy-density and superior safety characteristics.However,the integration of high-voltage cathodes with solid electrolytes(SEs)presents multiple challenges,including the formation of high-impedance layers from spontaneous chemical reactions,electrochemical instability,insufficient interfacial contact,and lattice expansion.These issues significantly impair battery performance and potentially lead to battery failure,thus impeding the commercialization of high-voltage SSLIBs.The incorporation of fluorides,known for their robust bond strength and high free energy of formation,has emerged as an effective strategy to address these challenges.Fluorinated electrolytes and electrode/electrolyte interfaces have been demonstrated to significantly influence the reaction reversibility/kinetics,safety,and stability of rechargeable batteries,particularly under high voltage.This review summarizes recent advancements in fluorination treatment for high-voltage SEs,focusing on solid polymer electrolytes(SPEs),inorganic solid electrolytes(ISEs),and composite solid electrolytes(CSEs),along with the performance enhancements these strategies afford.This review aims to provide a comprehensive understanding of the structure-property relationships,the characteristics of fluorinated interfaces,and the application of fluorinated SEs in high-voltage SSLIBs.Further,the impacts of residual moisture and the challenges of fluorinated SEs are discussed.Finally,the review explores potential future directions for the development of fluorinated SSLIBs.展开更多
Immense attention has been focused on developing supercapacitors in the field of energy storage by virtue of their exceptional power density,extended cycling stability and operational safety.However,traditional liquid...Immense attention has been focused on developing supercapacitors in the field of energy storage by virtue of their exceptional power density,extended cycling stability and operational safety.However,traditional liquid electrolytes pose severe challenges in response to leakage,high volatility and low electrochemical stability issues.To address these problems,we have developed a novel composite polymer membrane for gel polymer electrolytes(GPEs).This membrane features an internal fibrous framework composed of shape-memory polymers,while surface dielectric layers of PVDF-HFP cross-linked with modified TiO_(2)nanoparticles are constructed on both sides of the framework.This configuration modulates the Stern layer potential gradient and diffuse layer ionic distribution through dielectric polarization,thereby suppressing electrolyte decomposition at high voltages,mitigating side reactions and facilitating ionic conduction.The resultant quasi-solid-state supercapacitor demonstrates excellent electrochemical stability at a voltage of 3.5 V,achieving an energy density of 43.87 Wh kg^(-1),with a high-power density of 22.66 kW kg^(-1)along with exceptional cyclic stability and mechanical flexibility.The synergistic structural design offers a safe and efficient energy harvesting solution for wearable electronic devices and portable energy storage systems.展开更多
Enhancing the energy density of lithium-ion batteries through high-voltage cathodes holds great pro-mise.However,traditional carbonate-based electrolytes face significant challenges due to limited oxida-tive stability...Enhancing the energy density of lithium-ion batteries through high-voltage cathodes holds great pro-mise.However,traditional carbonate-based electrolytes face significant challenges due to limited oxida-tive stability and poor compatibility with high-nickel materials.This study introduces a novel electrolyte that combines bis(triethoxysilyl)methane(DMSP)as the sole solvent with lithium bis(fluorosulfonyl)imide(LiFSI)as the lithium salt.This formulation significantly improves the stability of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathodes and graphite anodes.The capacity retention of the NCM811 elec-trode increases from 5%to 95%after 1000 cycles at 1 C(3.0-4.5 V),while that of the graphite anode is improved from 22%to 92%after 400 cycles at 0.2 C(0.005-3.0 V).The NCM811//graphite pouch cell exhibits enhanced retention,rising from 12%to 66%at 25℃and from 3%to 65%at 60℃after 300 cycles at 0.2 C.Spectroscopic characterization and theoretical calculations reveal that the steric hindrance of the Si-O-CH_(3)groups in DMSP creates a weakly solvating structure,promoting the formation of Lit^(+)-FSI^(-)ion pairs and aggregation clusters,which enriches the electrode interphase with LiF,Li_(3)N,and Li_(2)SO_(3).Furthermore,DMSP with abundant Si-O effectively enhances the elasticity of the interphase layer,scav-enging harmful substances such as HF and suppressing gas evolution and transition metal dissolution.The simplicity of the DMSP-based electrolyte formulation,coupled with its superior performance,ensures scalability for large-scale manufacturing and practical application in the high-voltage battery.This work provides critical insights into improving interfacial chemistry and addressing compatibility issues in high-voltageNi-rich cathodes.展开更多
Solid-state batteries(SSBs) are highly attractive on account of their high energy density and good safety.In high-voltage and high-current conditions,however,the interface reactions,structural changes,and decompositio...Solid-state batteries(SSBs) are highly attractive on account of their high energy density and good safety.In high-voltage and high-current conditions,however,the interface reactions,structural changes,and decomposition of the electrolyte impede the transmission of lithium ions in all-solid-state lithium batteries(ASSLBs),significantly reducing the charging and discharging capacity and cycling stability of the battery and therefore restricting its practical applications.The main content of review is to conduct an in-depth analysis of the existing problems of solid-state batteries from the aspects of interface reactions,material failure,ion migration,and dendrite growth,and points out the main factors influencing the electrochemical performance of ASSLBs.Additionally,the compatibility and ion conduction mechanisms between polymer electrolytes,inorganic solid electrolytes,and composite electrolytes and the electrode materials are discussed.Furthermore,the perspectives of electrode materials,electrolyte properties,and interface modification are summarized and prospected,providing new optimization directions for the future commercialization of high-voltage solid-state electrolytes.展开更多
Groundwater is a crucial water source for urban areas in Africa, particularly where surface water is insufficient to meet demand. This study analyses the water quality of five shallow wells (WW1-WW5) in Half-London Wa...Groundwater is a crucial water source for urban areas in Africa, particularly where surface water is insufficient to meet demand. This study analyses the water quality of five shallow wells (WW1-WW5) in Half-London Ward, Tunduma Town, Tanzania, using Principal Component Analysis (PCA) to identify the primary factors influencing groundwater contamination. Monthly samples were collected over 12 months and analysed for physical, chemical, and biological parameters. The PCA revealed between four and six principal components (PCs) for each well, explaining between 84.61% and 92.55% of the total variance in water quality data. In WW1, five PCs captured 87.53% of the variability, with PC1 (33.05%) dominated by pH, EC, TDS, and microbial contamination, suggesting significant influences from surface runoff and pit latrines. In WW2, six PCs explained 92.55% of the variance, with PC1 (36.17%) highlighting the effects of salinity, TDS, and agricultural runoff. WW3 had four PCs explaining 84.61% of the variance, with PC1 (39.63%) showing high contributions from pH, hardness, and salinity, indicating geological influences and contamination from human activities. Similarly, in WW4, six PCs explained 90.83% of the variance, where PC1 (43.53%) revealed contamination from pit latrines and fertilizers. WW5 also had six PCs, accounting for 92.51% of the variance, with PC1 (42.73%) indicating significant contamination from agricultural runoff and pit latrines. The study concludes that groundwater quality in Half-London Ward is primarily affected by a combination of surface runoff, pit latrine contamination, agricultural inputs, and geological factors. The presence of microbial contaminants and elevated nitrate and phosphate levels underscores the need for improved sanitation and sustainable agricultural practices. Recommendations include strengthening sanitation infrastructure, promoting responsible farming techniques, and implementing regular groundwater monitoring to safeguard water resources and public health in the region.展开更多
Li/Mn-rich layered oxide(LMR)cathode active materials offer remarkably high specific discharge capacity(>250 mAh g^(-1))from both cationic and anionic redox.The latter necessitates harsh charging conditions to high...Li/Mn-rich layered oxide(LMR)cathode active materials offer remarkably high specific discharge capacity(>250 mAh g^(-1))from both cationic and anionic redox.The latter necessitates harsh charging conditions to high cathode potentials(>4.5 V vs Li|Li^(+)),which is accompanied by lattice oxygen release,phase transformation,voltage fade,and transition metal(TM)dissolution.In cells with graphite anode,TM dissolution is particularly detrimental as it initiates electrode crosstalk.Lithium difluorophosphate(LiDFP)is known for its pivotal role in suppressing electrode crosstalk through TM scavenging.In LMR‖graphite cells charged to an upper cutoff voltage(UCV)of 4.5 V,effective TM scavenging effects of LiDFP are observed.In contrast,for an UCV of 4.7 V,the scavenging effects are limited due to more severe TM dissolution compared an UCV of 4.5V.Given the saturation in solubility of the TM scavenging agents,which are LiDFP decomposition products,e.g.,PO_(4)^(3-) and PO_(3)F^(2-),higher concentrations of the LiDFP as precursor"cannot enhance the amount of scavenging species,they rather start to precipitate and damage the anode.展开更多
基金supported by the Exchange Program of Highend Foreign Experts of Ministry of Science and Technology of People’s Republic of China(No.G2023041003L)the Natural Science Foundation of Shaanxi Provincial Department of Education(No.23JK0367)+1 种基金the Scientific Research Startup Program for Introduced Talents of Shaanxi University of Technology(Nos.SLGRCQD2208,SLGRCQD2306,SLGRCQD2133)Contaminated Soil Remediation and Resource Utilization Innovation Team at Shaanxi University of Technology。
文摘As battery technology evolves and demand for efficient energy storage solutions,aqueous zinc ion batteries(AZIBs)have garnered significant attention due to their safety and environmental benefits.However,the stability of cathode materials under high-voltage conditions remains a critical challenge in improving its energy density.This review systematically explores the failure mechanisms of high-voltage cathode materials in AZIBs,including hydrogen evolution reaction,phase transformation and dissolution phenomena.To address these challenges,we propose a range of advanced strategies aimed at improving the stability of cathode materials.These strategies include surface coating and doping techniques designed to fortify the surface properties and structure integrity of the cathode materials under high-voltage conditions.Additionally,we emphasize the importance of designing antioxidant electrolytes,with a focus on understanding and optimizing electrolyte decomposition mechanisms.The review also highlights the significance of modifying conductive agents and employing innovative separators to further enhance the stability of AZIBs.By integrating these cutting-edge approaches,this review anticipates substantial advancements in the stability of high-voltage cathode materials,paving the way for the broader application and development of AZIBs in energy storage.
基金supported by the National Natural Science Foundation of China(U2241221).
文摘This article introduces a novel 20 V radiation-hardened high-voltage metal-oxide-semiconductor field-effect transistor(MOSFET)driver with an optimized input circuit and a drain-surrounding-source(DSS)structure.The input circuit of a conventional inverter consists of a thick-gate-oxide n-type MOSFET(NMOS).These conventional drivers can tolerate a total ionizing dose(TID)of up to 100 krad(Si).In contrast,the proposed comparator input circuit uses both a thick-gate-oxide p-type MOSFET(PMOS)and thin-gate-oxide NMOS to offer a high input voltage and higher TID tolerance.Because the thick-gate-oxide PMOS and thin-gate-oxide NMOS collectively provide better TID tolerance than the thick-gate-oxide NMOS,the circuit exhibits enhanced TID tolerance of>300 krad(Si).Simulations and experimental date indicate that the DSS structure reduces the probability of unwanted parasitic bipolar junction transistor activation,yielding a better single-event effect tolerance of over 81.8 MeVcm^(2)mg^(-1).The innovative strategy proposed in this study involves circuit and layout design optimization,and does not require any specialized process flow.Hence,the proposed circuit can be manufactured using common commercial 0.35μm BCD processes.
基金supported by the National Natural Science Foundation of China(22169002 and 22469003)the Chongzuo Key Research and Development Program of China(20241205 and 20231204)the Counterpart Aid Project for Discipline Construction from Guangxi University(2023M02)。
文摘Expanding the cutoff voltage of layered oxide cathodes for sodium-ion batteries(SIBs)is crucial for overcoming their existing energy density limitations.However,cationic/anodic redox-triggered multiple phase transitions and unfavorable interfacial side reactions accelerate capacity and voltage decay.Herein,we present a straightforward melting plus reactive wetting strategy using H_(3)BO_(3)for surface modification of O_(3)-type Na_(0.9)Cu_(0.12)Ni_(0.33)Mn_(0.4)Ti_(0.15)O_(2)(CNMT).The transformation of H_(3)BO_(3)from solid to liquid under mild heating facilitates the uniform dispersion and complete surface coverage of CNMT particles.By neutralizing the residual alkali and extracting Na^(+)from the CNMT lattice,H_(3)BO_(3)forms a multifunctional Na_(2)B_(2)O_(5)-dominated layer on the CNMT surface.This Na_(x)B_(y)O_(z)(NBO)layer plays a positive role in providing low-barrier Na^(+)transport channels,suppressing phase transitions,and minimizing the generation of O_(2)/CO_(2)gases and resistive byproducts.As a result,at a charge cutoff voltage of 4.5 V,the NBO-coated CNMT delivers a high discharge capacity of 149,1 mAh g^(-1)at 10 mA g^(-1)and exhibits excellent cycling stability at 100 mA g^(-1)over 200 cycles with a higher capacity retention than that of pristine CNMT(86,4%vs,62.1%).This study highlights the effectiveness of surface modification using lowmelting-point solid acids,with potential applications for other layered oxide cathode materials to achieve stable high-voltage cycling.This proposed strategy opens new avenues for the construction of highquality coatings for high-voltage layered oxide cathodes in SIBs.
基金funded by the National Natural Science Foundation of China Youth Fund(Grant No.62304022)Science and Technology on Electromechanical Dynamic Control Laboratory(China,Grant No.6142601012304)the 2022e2024 China Association for Science and Technology Innovation Integration Association Youth Talent Support Project(Grant No.2022QNRC001).
文摘Metal Additive Manufacturing(MAM) technology has become an important means of rapid prototyping precision manufacturing of special high dynamic heterogeneous complex parts. In response to the micromechanical defects such as porosity issues, significant deformation, surface cracks, and challenging control of surface morphology encountered during the selective laser melting(SLM) additive manufacturing(AM) process of specialized Micro Electromechanical System(MEMS) components, multiparameter optimization and micro powder melt pool/macro-scale mechanical properties control simulation of specialized components are conducted. The optimal parameters obtained through highprecision preparation and machining of components and static/high dynamic verification are: laser power of 110 W, laser speed of 600 mm/s, laser diameter of 75 μm, and scanning spacing of 50 μm. The density of the subordinate components under this reference can reach 99.15%, the surface hardness can reach 51.9 HRA, the yield strength can reach 550 MPa, the maximum machining error of the components is 4.73%, and the average surface roughness is 0.45 μm. Through dynamic hammering and high dynamic firing verification, SLM components meet the requirements for overload resistance. The results have proven that MEM technology can provide a new means for the processing of MEMS components applied in high dynamic environments. The parameters obtained in the conclusion can provide a design basis for the additive preparation of MEMS components.
文摘Lithium-ion capacitors(LICs)combine the high power dens-ity of electrical double-layer capacitors with the high energy density of lithium-ion batteries.However,they face practical limitations due to the narrow operating voltage window of their activated carbon(AC)cathodes.We report a scalable thermal treatment strategy to develop high-voltage-tolerant AC cathodes.Through controlled thermal treatment of commer-cial activated carbon(Raw-AC)under a H_(2)/Ar atmosphere at 400-800℃,the targeted reduction of degradation-prone functional groups can be achieved while preserving the critical pore structure and increasing graph-itic microcrystalline ordering.The AC treated at 400℃(HAC-400)had a significant increase in specific capacity(96.0 vs.75.1 mAh/g at 0.05 A/g)and better rate capability(61.1 vs.36.1 mAh/g at 5 A/g)in half-cell LICs,along with an 83.5%capacity retention over 7400 cycles within an extended voltage range of 2.0-4.2 V in full-cell LICs.Scalability was demonstrated by a 120 g batch production,enabling fabrication of pouch-type LICs with commercial hard carbon anodes that delivered a higher energy density of 28.3 Wh/kg at 1 C,and a peak power density of 12.1 kW/kg compared to devices using raw AC.This simple,industry-compatible approach may be used for producing ad-vanced cathode materials for practical high-performance LICs.
基金financially supported by National Key R&D Program(2021YFF0701905)。
文摘In order to save manpower and time costs,and to achieve simultaneous detection of multiple animal-derived components in meat and meat products,this study used multiple nucleotide polymorphism(MNP)marker technology based on the principle of high-throughput sequencing,and established a multi-locus 10 animalderived components identification method of cattle,goat,sheep,donkey,horse,chicken,duck,goose,pigeon,quail in meat and meat products.The specific loci of each species could be detected and the species could be accurately identified,including 5 loci for cattle and duck,3 loci for sheep,9 loci for chicken and horse,10 loci for goose and pigeon,6 loci for quail and 1 locus for donkey and goat,and an adulteration model was established to simulate commercially available samples.The results showed that the method established in this study had high throughput,good repeatability and accuracy,and was able to identify 10 animalderived components simultaneously with 100%repeatability accuracy.The detection limit was 0.1%(m/m)in simulated samples of chicken,duck and horse.Using the method established in this study to test commercially available samples,4 samples from 14 commercially available samples were detected to be inconsistent with the labels,of which 2 did not contain the target ingredient and 2 were adulterated with small amounts of other ingredients.
基金funding from the National Natural Science Foundation of China (Grant No.42277175)the pilot project of cooperation between the Ministry of Natural Resources and Hunan Province“Research and demonstration of key technologies for comprehensive remote sensing identification of geological hazards in typical regions of Hunan Province” (Grant No.2023ZRBSHZ056)the National Key Research and Development Program of China-2023 Key Special Project (Grant No.2023YFC2907400).
文摘Joint roughness coefficient(JRC)is the most commonly used parameter for quantifying surface roughness of rock discontinuities in practice.The system composed of multiple roughness statistical parameters to measure JRC is a nonlinear system with a lot of overlapping information.In this paper,a dataset of eight roughness statistical parameters covering 112 digital joints is established.Then,the principal component analysis method is introduced to extract the significant information,which solves the information overlap problem of roughness characterization.Based on the two principal components of extracted features,the white shark optimizer algorithm was introduced to optimize the extreme gradient boosting model,and a new machine learning(ML)prediction model was established.The prediction accuracy of the new model and the other 17 models was measured using statistical metrics.The results show that the prediction result of the new model is more consistent with the real JRC value,with higher recognition accuracy and generalization ability.
基金supported by the key project at the central government level:The ability establishment of sustainable use for valuable Chinese medicine resources(Grant number 2060302)the National Natural Science Foundation of China(Grant number 82373982,82173929).
文摘Background:Rosa chinensis Jacq.and Rosa rugosa Thunb.are not only of ornamental value,but also edible flowers and the flower buds have been listed in the Chinese Pharmacopoeia as traditional medicines.The two plants have some differences in efficacy,but the flower buds are easily confused for similar traits.In addition,large-scale cultivation of ornamental rose flowers may lead to a decrease in the effective components of medicinal roses.Therefore,it is necessary to study the chemical composition and make quality evaluation of Rosae Chinensis Flos(Yueji)and Rosae Rugosae Flos(Meigui).Methods:In this study,40 batches of samples including Meigui and Yueji from different regions in China were collected to establish high-performance liquid chromatography fingerprints.Then,the fingerprints data was analyzed using principal component analysis,hierarchical cluster analysis,and partial least squares discriminant analysis analysis chemometrics to obtain information on intergroup differences,and non-targeted metabolomic techniques were applied to identify and compare chemical compositions of samples which were chosen from groups with large differences.Differential compounds were screened by orthogonal partial least-squares discriminant analysis and S-plot,and finally multi-component quantification was performed to comprehensively evaluate the quality of Yueji and Meigui.Results:The similarity between the fingerprints of 40 batches roses and the reference print R was 0.73 to 0.93,indicating that there were similarities and differences between the samples.Through principal component analysis and hierarchical cluster analysis of fingerprints data,the samples from different origins and varieties were intuitively divided into four groups.Partial least-squares discriminant analysis analysis showed that Meigui and Yueji cluster into two categories and the model was reliable.A total of 89 compounds were identified by high resolution mass spectrometry,mainly were flavonoids and flavonoid glycosides,as well as phenolic acids.Eight differential components were screened out by orthogonal partial least-squares discriminant analysis and S-plot analysis.Quantitative analyses of the eight compounds,including gallic acid,ellagic acid,hyperoside,isoquercitrin,etc.,showed that Yueji was generally richer in phenolic acids and flavonoids than Meigui,and the quality of Yueji from Shandong and Hebei was better.It is worth noting that Xinjiang rose is rich in various components,which is worth focusing on more in-depth research.Conclusion:In this study,the fingerprints of Meigui and Yueji were established.The chemical components information of roses was further improved based on non-targeted metabolomics and mass spectrometry technology.At the same time,eight differential components of Meigui and Yueji were screened out and quantitatively analyzed.The research results provided a scientific basis for the quality control and rational development and utilization of Rosae Chinensis Flos and Rosae Rugosae Flos,and also laid a foundation for the study of their pharmacodynamic material basis.
文摘Restoration of phase aberrations is crucial for addressing atmospheric turbulence in light propagation.Traditional restoration algorithms based on Zernike polynomials(ZPs)often encounter challenges related to high computational complexity and insufficient capture of high-frequency phase aberration components,so we proposed a Principal-Component-Analysis-based method for representing phase aberrations.This paper discusses the factors influencing the accuracy of restoration,mainly including the sample space size and the sampling interval of D/r_(0),on the basis of characterizing phase aberrations by Principal Components(PCs).The experimental results show that a larger D/r_(0)sampling interval can ensure the generalization ability and robustness of the principal components in the case of a limited amount of original data,which can help to achieve high-precision deployment of the model in practical applications quickly.In the environment with relatively strong turbulence in the test set of D/r_(0)=24,the use of 34 terms of PCs can improve the corrected Strehl ratio(SR)from 0.007 to 0.1585,while the Strehl ratio of the light spot after restoration using 34 terms of ZPs is only 0.0215,demonstrating almost no correction effect.The results indicate that PCs can serve as a better alternative in representing and restoring the characteristics of atmospheric turbulence induced phase aberrations.These findings pave the way to use PCs of phase aberrations with fewer terms than traditional ZPs to achieve data dimensionality reduction,and offer a reference to accelerate and stabilize the model and deep learning based adaptive optics correction.
基金supported by National Natural Science Foundation of China(Nos.52374298)National Natural Science Foundation of Chongqing(Nos.CSTB2023NSCQ-MSX0662)Beijing Natural Science Foundation(Nos.L243019).
文摘Thermal batteries are a type of thermally activated reserve battery,where the cathode material significantly influences the operating voltage and specific capacity.In this work,Cu_(2)O–CuO nanowires are prepared by in-situ thermal oxidation method onto Cu foam,which are further coated with a carbon layer derived from polydopamine(PDA).The morphology of the nanowires has been examined using scanning electron microscopy(SEM)and transmission electron microscopy(TEM).The material shows a kind of core–shell structure,with CuO as the shell and Cu_(2)O as the core.To further explore the interaction between the material and lithium-ion(Li^(+)),the Lit adsorption energies of CuO and Cu_(2)O were calculated,revealing a stronger affinity of Li^(+) for CuO.The unique core–shell nanowire structure of Cu_(2)O–CuO can provide a good Li^(+)adsorption with the outer layer CuO and excellent structural stability with the inner layer Cu_(2)O.When applied in thermal batteries,Cu_(2)O–CuO–C nanowires exhibit specific capacity and specific energy of 326 mAh g^(-1)and 697 Wh kg^(-1)at a cut-off voltage of 1.5 V both of which are higher than those of Cu_(2)O–CuO(238 mAh g^(-1)and 445 Wh kg^(-1)).The discharge process includes the insertion of lithium ions and subsequent reduction reactions,ultimately resulting in the formation of lithium oxide and copper.
文摘Objective: The present research aims to determine if adherence to the Lewinnek safe zone, when exclusively considered, constitutes a pivotal element for ensuring stability in the context of total hip arthroplasty. This is done by examining the acetabular placement in instances of hip dislocation after total hip arthroplasty (THA). Methodology: The authors searched 2653 patient records from 2015 to 2022 looking for patients who had total hip arthroplasty at our facility. For the analysis, 23 patients were culled from 64 individuals who exhibited post-THA dislocations, employing a stringent exclusion criterion, and the resultant acetabular angulation and anteversion were quantified utilizing PEEKMED software (Peek Health S.A., Portugal) upon radiographic evidence. Results: Within the operational timeframe, from the cohort of 2653 subjects, 64 presented with at least a singular incident of displacement. Post-exclusion criterion enforcement, 23 patients were eligible for inclusion. Of these, 10 patients conformed to the safe zone demarcated by Lewinnek for both inclination and anteversion angles, while 13 exhibited deviations from the prescribed anteversion and/or inclination benchmarks. Conclusion: Analysis of the 23 patients reveals that 13 did not confirm to be in the safe zone parameters for anteversion and/or inclination, whereas 10 were within the safe zone as per Lewinnek’s guidelines. This investigative review, corroborated by extant literature, suggests that the isolated consideration of the Lewinnek safe zone does not suffice as a solitary protective factor. It further posits that additional variables are equally critical as acetabular positioning and mandate individual assessment.
文摘Dear Editor,Local recurrence and cervical lymph node metastases are major causes of mortality in patients with head and neck squamous cell carcinoma(HNSCC).To date,none of the proposed strategies for predicting outcomes in this disease have proven fully effective,and a comprehensive physical examination remains the primary method for early detection and monitoring of HNSCC.
文摘This paper focuses on the high-voltage safety of drive motor systems in new energy vehicles and conducts standardized research on functional safety design in the concept phase. In view of the lack of high-voltage hazard analysis for drive motor systems in existing standards, based on theories such as GB/T 34590 and ISO 26262, the safety levels are deeply analyzed. The HAZOP method is innovatively used, and 16 types of guidewords are combined to comprehensively analyze the system functions, identifying vehicle hazards such as high-voltage electric shock caused by functional abnormalities, including high-voltage interlock function failure and abnormal active discharge. Subsequently, safety goals such as preventing high-voltage electric shock are set, functional safety requirements such as accurately obtaining collision signals and timely discharging high-voltage electricity are formulated, and requirements for external signal sources and other technologies are clearly defined, constructing a complete high-voltage safety protection system. The research results provide important technical support and standardized references for the high-voltage safety functional design of drive motor systems in new energy vehicles, and are of great significance for improving the high-voltage safety level of the new energy vehicle industry, expecting to play a key role in subsequent product development and standard improvement.
基金supported by the A*STAR MTC Programmatic Project(No.M23L9b0052)the Indonesia-NTU Singapore Institute of Research for Sustainability and Innovation(INSPIRASI)(No.6635/E3/KL.02.02/2023)+2 种基金the Singapore NRF Singapore-China Flagship Program(No.023740-00001)the National Natural Science Foundation of China(Nos.11975043 and 11475300)the China Scholarship Council(No.202306460087)。
文摘High-voltage solid-state lithium-ion batteries(SSLIBs)have attracted considerable research attention in recent years due to their high-energy-density and superior safety characteristics.However,the integration of high-voltage cathodes with solid electrolytes(SEs)presents multiple challenges,including the formation of high-impedance layers from spontaneous chemical reactions,electrochemical instability,insufficient interfacial contact,and lattice expansion.These issues significantly impair battery performance and potentially lead to battery failure,thus impeding the commercialization of high-voltage SSLIBs.The incorporation of fluorides,known for their robust bond strength and high free energy of formation,has emerged as an effective strategy to address these challenges.Fluorinated electrolytes and electrode/electrolyte interfaces have been demonstrated to significantly influence the reaction reversibility/kinetics,safety,and stability of rechargeable batteries,particularly under high voltage.This review summarizes recent advancements in fluorination treatment for high-voltage SEs,focusing on solid polymer electrolytes(SPEs),inorganic solid electrolytes(ISEs),and composite solid electrolytes(CSEs),along with the performance enhancements these strategies afford.This review aims to provide a comprehensive understanding of the structure-property relationships,the characteristics of fluorinated interfaces,and the application of fluorinated SEs in high-voltage SSLIBs.Further,the impacts of residual moisture and the challenges of fluorinated SEs are discussed.Finally,the review explores potential future directions for the development of fluorinated SSLIBs.
基金financially supported by the Key Research and Development Program of Shaanxi(No.2022GXLH-01-23)the Fundamental Research Funds for the Central Universities,CHD(No.300102384106)+1 种基金the Innovation Capability Support Program of Shaanxi(No.2022KXJ-144)the National Natural Science Foundation of China(No.22209101)
文摘Immense attention has been focused on developing supercapacitors in the field of energy storage by virtue of their exceptional power density,extended cycling stability and operational safety.However,traditional liquid electrolytes pose severe challenges in response to leakage,high volatility and low electrochemical stability issues.To address these problems,we have developed a novel composite polymer membrane for gel polymer electrolytes(GPEs).This membrane features an internal fibrous framework composed of shape-memory polymers,while surface dielectric layers of PVDF-HFP cross-linked with modified TiO_(2)nanoparticles are constructed on both sides of the framework.This configuration modulates the Stern layer potential gradient and diffuse layer ionic distribution through dielectric polarization,thereby suppressing electrolyte decomposition at high voltages,mitigating side reactions and facilitating ionic conduction.The resultant quasi-solid-state supercapacitor demonstrates excellent electrochemical stability at a voltage of 3.5 V,achieving an energy density of 43.87 Wh kg^(-1),with a high-power density of 22.66 kW kg^(-1)along with exceptional cyclic stability and mechanical flexibility.The synergistic structural design offers a safe and efficient energy harvesting solution for wearable electronic devices and portable energy storage systems.
基金supported by the National Natural Science Foundation of China (Grant No. 22179041)the Guangzhou Science and Technology Plan Project (Grant No. 2024A04J4354)the Guangdong Basic and Applied Basic Research Foundation (Grant No. 2024A1515010034)
文摘Enhancing the energy density of lithium-ion batteries through high-voltage cathodes holds great pro-mise.However,traditional carbonate-based electrolytes face significant challenges due to limited oxida-tive stability and poor compatibility with high-nickel materials.This study introduces a novel electrolyte that combines bis(triethoxysilyl)methane(DMSP)as the sole solvent with lithium bis(fluorosulfonyl)imide(LiFSI)as the lithium salt.This formulation significantly improves the stability of LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2)(NCM811)cathodes and graphite anodes.The capacity retention of the NCM811 elec-trode increases from 5%to 95%after 1000 cycles at 1 C(3.0-4.5 V),while that of the graphite anode is improved from 22%to 92%after 400 cycles at 0.2 C(0.005-3.0 V).The NCM811//graphite pouch cell exhibits enhanced retention,rising from 12%to 66%at 25℃and from 3%to 65%at 60℃after 300 cycles at 0.2 C.Spectroscopic characterization and theoretical calculations reveal that the steric hindrance of the Si-O-CH_(3)groups in DMSP creates a weakly solvating structure,promoting the formation of Lit^(+)-FSI^(-)ion pairs and aggregation clusters,which enriches the electrode interphase with LiF,Li_(3)N,and Li_(2)SO_(3).Furthermore,DMSP with abundant Si-O effectively enhances the elasticity of the interphase layer,scav-enging harmful substances such as HF and suppressing gas evolution and transition metal dissolution.The simplicity of the DMSP-based electrolyte formulation,coupled with its superior performance,ensures scalability for large-scale manufacturing and practical application in the high-voltage battery.This work provides critical insights into improving interfacial chemistry and addressing compatibility issues in high-voltageNi-rich cathodes.
基金financial support received from the National Key R&D Program of China (2023YFB2504000)the financial support from the National Outstanding Youth Foundation of China (52125104)+2 种基金the National Natural Science Foundation of China (52071285)the Fundamental Research Funds for the Central Universities (226-2024-00075)the National Youth Top-Notch Talent Support Program。
文摘Solid-state batteries(SSBs) are highly attractive on account of their high energy density and good safety.In high-voltage and high-current conditions,however,the interface reactions,structural changes,and decomposition of the electrolyte impede the transmission of lithium ions in all-solid-state lithium batteries(ASSLBs),significantly reducing the charging and discharging capacity and cycling stability of the battery and therefore restricting its practical applications.The main content of review is to conduct an in-depth analysis of the existing problems of solid-state batteries from the aspects of interface reactions,material failure,ion migration,and dendrite growth,and points out the main factors influencing the electrochemical performance of ASSLBs.Additionally,the compatibility and ion conduction mechanisms between polymer electrolytes,inorganic solid electrolytes,and composite electrolytes and the electrode materials are discussed.Furthermore,the perspectives of electrode materials,electrolyte properties,and interface modification are summarized and prospected,providing new optimization directions for the future commercialization of high-voltage solid-state electrolytes.
文摘Groundwater is a crucial water source for urban areas in Africa, particularly where surface water is insufficient to meet demand. This study analyses the water quality of five shallow wells (WW1-WW5) in Half-London Ward, Tunduma Town, Tanzania, using Principal Component Analysis (PCA) to identify the primary factors influencing groundwater contamination. Monthly samples were collected over 12 months and analysed for physical, chemical, and biological parameters. The PCA revealed between four and six principal components (PCs) for each well, explaining between 84.61% and 92.55% of the total variance in water quality data. In WW1, five PCs captured 87.53% of the variability, with PC1 (33.05%) dominated by pH, EC, TDS, and microbial contamination, suggesting significant influences from surface runoff and pit latrines. In WW2, six PCs explained 92.55% of the variance, with PC1 (36.17%) highlighting the effects of salinity, TDS, and agricultural runoff. WW3 had four PCs explaining 84.61% of the variance, with PC1 (39.63%) showing high contributions from pH, hardness, and salinity, indicating geological influences and contamination from human activities. Similarly, in WW4, six PCs explained 90.83% of the variance, where PC1 (43.53%) revealed contamination from pit latrines and fertilizers. WW5 also had six PCs, accounting for 92.51% of the variance, with PC1 (42.73%) indicating significant contamination from agricultural runoff and pit latrines. The study concludes that groundwater quality in Half-London Ward is primarily affected by a combination of surface runoff, pit latrine contamination, agricultural inputs, and geological factors. The presence of microbial contaminants and elevated nitrate and phosphate levels underscores the need for improved sanitation and sustainable agricultural practices. Recommendations include strengthening sanitation infrastructure, promoting responsible farming techniques, and implementing regular groundwater monitoring to safeguard water resources and public health in the region.
基金the Ministry for Culture and Science of North Rhine Westphalia(Germany)for funding this work within the International Graduate School for Battery Chemistry,Characterization,Analysis,Recycling,and Application(BACCARA)Open Access funding enabled and organized by Projekt DEAL。
文摘Li/Mn-rich layered oxide(LMR)cathode active materials offer remarkably high specific discharge capacity(>250 mAh g^(-1))from both cationic and anionic redox.The latter necessitates harsh charging conditions to high cathode potentials(>4.5 V vs Li|Li^(+)),which is accompanied by lattice oxygen release,phase transformation,voltage fade,and transition metal(TM)dissolution.In cells with graphite anode,TM dissolution is particularly detrimental as it initiates electrode crosstalk.Lithium difluorophosphate(LiDFP)is known for its pivotal role in suppressing electrode crosstalk through TM scavenging.In LMR‖graphite cells charged to an upper cutoff voltage(UCV)of 4.5 V,effective TM scavenging effects of LiDFP are observed.In contrast,for an UCV of 4.7 V,the scavenging effects are limited due to more severe TM dissolution compared an UCV of 4.5V.Given the saturation in solubility of the TM scavenging agents,which are LiDFP decomposition products,e.g.,PO_(4)^(3-) and PO_(3)F^(2-),higher concentrations of the LiDFP as precursor"cannot enhance the amount of scavenging species,they rather start to precipitate and damage the anode.
