Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,a...Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.展开更多
To improve the high-temperature oxidation resistance of TiAlNb9 alloy,a Cr-Al-Y co-deposition coating was prepared on the alloy surface by the pack cementation method.The microstructure of the coating was analyzed by ...To improve the high-temperature oxidation resistance of TiAlNb9 alloy,a Cr-Al-Y co-deposition coating was prepared on the alloy surface by the pack cementation method.The microstructure of the coating was analyzed by scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer,and the high-temperature oxidation properties of the substrate and coating at 1273 K were compared and studied.The results show that the Cr-Al-Y coating is about 30μm in thickness,and it has a dense structure and good film-substrate bonding.The coating includes an outer layer composed of TiCr_(2),TiCr,Ti_(4)Cr,and(Ti,Nb)Cr_(4) phases as well as an inner layer composed of Ti_(2)Al,and Nb-richγ-TiAl interdiffusion zone.The TiAlNb9 substrate forms an oxide layer composed of TiO_(2) and Al_(2)O_(3) at 1273 K.Due to its loose and porous structure,TiO_(2) oxide film cannot effectively isolate the internal diffusion of element O,resulting in continuous oxidation damage to the substrate.The Cr-Al-Y co-deposition coating forms a dense Cr_(2)O_(3) and Al_(2)O_(3) oxide layer during oxidation,effectively preventing the internal diffusion of element O and significantly improving the high-temperature oxidation resistance of the substrate alloy.展开更多
Surface recrystallization(RX) is a typical grain defect observed in directionally solidified(DS) Ni-based superalloys. Most studies have focused on the RX behavior and its impact on the mechanical properties of single...Surface recrystallization(RX) is a typical grain defect observed in directionally solidified(DS) Ni-based superalloys. Most studies have focused on the RX behavior and its impact on the mechanical properties of single-crystal(SC) superalloys, with limited research on its influence on the high-temperature mechanical properties of DS superalloys. This study systematically investigated the effect of RX on the high-temperature tensile properties of a DS DZ409 superalloy. The results show that at 650℃, the yield strength decreases almost linearly with an increase in RX fraction. A significant reduction in elongation is observed as the RX fraction increases from 0% to 4.9%. However, beyond this point, further increase in RX fraction leads to minimal changes in elongation. At 950℃, both yield strength and elongation decrease as the RX fraction increases from 0% to 4.9%. At 650℃, fractures in the RX DS superalloys exhibit a mixed mode of transgranular and intergranular cleavage fracture, while at 950℃, it features a combination of ductile and intergranular dimple fractures. The failure mechanism of the RX DS superalloy is associated with the introduction of transverse grain boundaries(GBs) during RX. In the early stages of tensile testing at intermediate and high temperatures, cracks can easily initiate at these GBs. Subsequently, the cracks propagate along the GBs into the DS matrix, ultimately leading to failure of the DS superalloy.展开更多
In the fields of optoelectronics and semiconductors, reliable fixation and handling of brittle materials (glass, wafer, etc.) in high-temperature, vacuum, and vibration environments face particular technical challenge...In the fields of optoelectronics and semiconductors, reliable fixation and handling of brittle materials (glass, wafer, etc.) in high-temperature, vacuum, and vibration environments face particular technical challenges. These challenges include the inability of suction cups in a vacuum, the residue of chemical adhesives, and the easy damage of mechanical clamping. In this paper, fluorine-based bionic adhesive pads (FBAPs) obtained using molding technology to imitate gecko micropillar arrays are presented. FBAPs inhibit the substantial decay of adhesive properties at high temperatures and provide stable and reliable performance in vacuum and vibration environments. The results demonstrated that the decayed force values of the normal and tangential strength of the FBAP were only 9.01% and 5.82% of the planar samples when warmed up to 300℃ from 25℃, respectively. In a vacuum, all FBAPs exhibit less than 20% adhesion attenuation, and in a vibrational environment, they can withstand accelerations of at least 4.27 g. The design of the microstructure arrays enables the realization of efficient and non-destructive separation through mechanical rotation or blowing. It provides a bionic material basis for the fixation of brittle materials on smooth surfaces under complex environments and for transportation automation.展开更多
High-temperature radiative cooling is essential for solar absorbers,as it mitigates efficiency degradation resulting from thermal accumulation.While porous structures have proven effective in enhancing absorber perfor...High-temperature radiative cooling is essential for solar absorbers,as it mitigates efficiency degradation resulting from thermal accumulation.While porous structures have proven effective in enhancing absorber performance,practical manufacturing processes and prolonged operational wear inevitably introduce surface roughness and structural deviations,which profoundly impact radiative properties.This study constructs a ZnS/Ag solar absorber model with surface roughness and employs the finite-difference time-domain method to investigate how characteristic length,surface roughness,porosity,pore shape factor,and taper influence its radiative properties in the 3μm-5μm band at 750 K.Results show optimal absorption at a 1μm characteristic length with a 36.72%improvement compared to the model with l=0.25μm,increased absorption with higher porosity with a 69.29%improvement at 0.6 compared to the non-porous structure,lower circularity with a 19.03%improvement for C=0.89 compared to C=1.00,while surface roughness with a 61.24%improvement at RMS=0.031 compared to RMS=0 and taper with a 38.29%improvement at β=20°compared to β=0°also exert significant effects.This work provides engineering design guidelines for high-efficiency,low-cost absorbers.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for ca...Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for catalyst design and performance improvement in these applications.In this work,we systematically investigate the HPOR/HPRR mechanisms on low-index Pt surfaces,specifically Pt(111),Pt(100)and Pt(110),through density functional theory(DFT)calculations combined with the computational hydrogen electrode(CHE)model.For HPOR,all the low-index Pt surfaces exhibit a unified potential-determining step(PDS)involving the electrochemical oxidation of hydroperoxyl intermediates(HOO*).The binding free energy of HOO*(Δ_(GHOO*))emerges as an activity descriptor,with Pt(110)exhibiting the highest HPOR activity.The HPRR mechanism follows a chem-electrochemical(C-EC)pathway.The rate-determining step(RDS)of HPRR is either the cleavage of the HO-OH bond(chemical)or the reduction of HO(electrochemical),depending on their respective activation energies.These activation energies are functions of the HO*binding free energy,Δ_(GHO*),establishingΔ_(GHO*)as the descriptor for HPRR activity prediction.Pt(111)and Pt(100)are identified as the most active HPRR catalysts among the studied metal surfaces,although they still experience a significant overpotential.The scaling relationship betweenΔ_(GHOO*)andΔ_(GHO*)reveals a thermodynamic coupling of HPOR and HPRR,explaining their occurrence on Pt surfaces.These findings provide important insights and activity descriptors for both HPOR and HPRR,providing valuable guidance for the design of electrocatalysts in H_(2)O_(2)-related energy applications and fuel cells.展开更多
This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by th...This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by the patterns found on marine shells.The impacts of the parameters on wettability,Surface Free Energy(SFE),surface topography,and texture roughness generated by the laser beam tracking a spiral path were investigated.Reducing spiral pitch produces more complicated and chaotic surface patterns.Most surfaces are hydrophobic,and surface roughness and topography influence the Contact Angle(CA).Topography and roughness were affected by frequency and scanning speed;a decrease in scanning speed and frequency generated more chaotic and irregular surface textures.With general factorial analysis and Analysis of Variance(ANOVA),our statistical study reveals that accounting for 88%of the influence,the scanning speed is the primary factor influencing surface roughness.On the other hand,the spiral pitch is essential for defining the struc-tural features of the surface,even if it less influences roughness.The SFE of laser-textured CoCr28Mo alloy specimens was optimizable within the range of 14-32 mN/m.The relevant findings offer valuable insights into optimizing LST for the specific surface properties of the Co-based alloy.展开更多
This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experi...This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experiments were conducted in a constant-temperature bath at a cold surface temperature of–5℃,relative humidity of 90%,and ambient air temperature of 10℃.The results reveal that the variation trends of frost morphology,frost mass,and frost layer thickness are generally consistent across surfaces with different wettability.Among the tested surfaces,frost crystal formation and complete surface coverage occurred latest on the superhydrophobic surface(CA=153.9–165.8℃),next on the bare aluminumsurface(75.3–83.2℃),and earliest on the hydrophilic surface(5.3–7.5℃).At the same frosting duration,the superhydrophobic surface exhibited a sparse and fluffy frost layer,the bare aluminum surface formed a rough and dense frost,while the hydrophilic surface developed a fine and compact frost layer.The amount of frost formation decreased in the order of hydrophilic>bare aluminum>superhydrophobic,indicating that the superhydrophobic surface provides the most significant anti-frosting effect during the initial stages of frost formation.For instance,on the Type A corrugated structure,after 15 min of frosting,the frost mass on the superhydrophobic surface was 38.78%and 68.45%lower than those on the bare aluminum and hydrophilic surfaces,respectively.After 30 min,these differences were 4.99%and 25.26%,respectively.Overall,the superhydrophobic surface exhibited the smallest frost mass and frost layer thickness,demonstrating superior anti-frosting performance compared with the other surface types.展开更多
Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been d...Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.展开更多
Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosi...Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosion resistance and the role of the oxide scale in corrosion environments.The corrosion resistance of CF-PHS with and without oxide scale was comprehensively evaluated by analyzing electrochemical processes and corrosion products,as well as characterizing the corroded oxide scale features,while comparing it with commercial 22MnB5 steel.The results indicate that CF-PHS exhibits superior corrosion resistance compared to 22MnB5 steel and the presence of oxide scale may have a negative influence on short-time corrosion resistance.The ultra-thin oxide scale is unable to effectively and timely mitigate pit propagation during the rapid electrochemical tests.Conversely,during the prolonged corrosion process,the oxide scale can still function as the physical barrier to provide protective effects,making the corrosion process develop more slowly and evenly.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has att...The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved cerami...In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.展开更多
The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Sur...The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."展开更多
Photodetectors can convert light energy into electrical signals,so are widely used in photovoltaics,photon counting,monitoring,and imaging.Photodetectors are easy to prepare high-resolution photochips because of their...Photodetectors can convert light energy into electrical signals,so are widely used in photovoltaics,photon counting,monitoring,and imaging.Photodetectors are easy to prepare high-resolution photochips because of their small size unit integration.However,these photodetector units often exhibit poor photoelectric performance due to material defects and inadequate structures,which greatly limit the functions of devices.Designing modification strategies and micro-/nanostructures can compensate for defects,adjust the bandgap,and develop novel quantum structures,which consequently optimize photovoltaic units and revolutionize optoelectronic devices.Here,this paper aims to comprehensively elaborate on the surface/interface engineering scheme of micro-/nano-photodetectors.It starts from the fundamentals of photodetectors,such as principles,types,and parameters,and describes the influence of material selection,manufacturing techniques,and post-processing.Then,we analyse in detail the great influence of surface/interface engineering on the performance of photovoltaic devices,including surface/interface modification and micro-/nanostructural design.Finally,the applications and prospects of optoelectronic devices in various fields such as miniaturization of electronic devices,robotics,and human–computer interaction are shown.展开更多
To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype wa...To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype was selected by Finite Element Method(FEM).In addition,the bionic parameters were optimized by Response Surface Method(RSM).Samples holding BNS were prepared by Laser Processing,tribological properties were tested by a Friction and Wear Tester and worn surface morphology was characterized by a Scanning Electron Microscope(SEM).The results showed that BNS on friction surface could regulate the stress distribution and alleviate the peak stress.Among all samples,the coupled texture of pit-hexagonal got the minimum peak stress.During braking,bionic texture could also collect wear debris or change the motion forms from sliding to rotation,which can reduce abnormal abrasion.The wear rate was reduced by 19.31%.The results in this paper can provide a new idea for enhancing the tribological properties of CBFMs,and can also lay the foundation for further research of bionic tribology.展开更多
In this study,polyacrylic acid(PAA)films were employed as a model system,and a series of PAA films with tunable water wettability was systematically prepared by varying molecular weight and curing temperature.Using at...In this study,polyacrylic acid(PAA)films were employed as a model system,and a series of PAA films with tunable water wettability was systematically prepared by varying molecular weight and curing temperature.Using attenuated total reflectance Fourier-transform infrared spectroscopy(ATR-FTIR),the molecular configurations of surface carboxyl groups(COOH),free carboxyl(COOH_(f))and hydrogen-bonded carboxyl(COOH_(HB),were directly correlated with the polar component of surface energy(γ^(s,p)).By decomposing theγ^(s,p)values of the PAA thin films as a sum of the contributions of COOH_(f)and COOH_(H B),the intrinsic polar component of surface energy of COOH_(H B)(γ_(H B)^(s,p*))was quantified for the first time as 8.34 mN/m,significantly lower than that of COOH_(f)(γ_(f)^(s,p*)=34 mN/m).This result highlights that hydrogen bonding markedly reduces theγ^(s,p),providing a rational explanation for the relatively large water contact angle observed on PAA thin films.Furthermore,it establishes a thermodynamic basis for estimating the fraction of surface COOH_(H B)groups(f H B)from wettability measurements.Further extension of the model to carboxyl-terminated self-assembled monolayers(COOH-SAMs)revealed that surface COOH density(ΣCOOH)critically regulates wetting behavior:whenΣCOOH ranges from 4.30 to 5.25 nm^(-2),COOH groups predominantly exist in a free state and facilitate effective hydration layers,thereby promoting superhydrophilicity.Overall,this study not only establishes a unified thermodynamic framework linking surface COOH configurations to macroscopic wettability,but also validates its universality by extending it to COOH-SAMs systems,thereby providing a unified theoretical framework for the controllable design of hydrophilicity in various COOH-functionalized surfaces.展开更多
A methodology for the reduction of radar cross section(RCS)of cambered platforms within the target airspace is presented,which utilizes a dual-polarized ultra-wide-angle artificial electromagnetic absorbing surface.By...A methodology for the reduction of radar cross section(RCS)of cambered platforms within the target airspace is presented,which utilizes a dual-polarized ultra-wide-angle artificial electromagnetic absorbing surface.By applying the theory of generalized Brewster complex wave impedance matching,five distinct unit cell designs are developed to attain more than95%absorption rate for dual-polarized incident waves within five angular ranges:0°-30°,30°-50°,50°-60°,60°-70°,and 70°-80°.To optimally reduce the RCS of a cambered platform,the five types of units can be evenly distributed on the surface based on the local incident angles of plane waves originating from the target airspace.As an illustrative example,the leading edge of an airfoil is taken into account,and experimental measurements validate the efficiency of the proposed structure.Specifically,the absorbing surface achieves more than 10 dB of RCS reduction in the frequency ranges from 5-10 GHz(about66.7%relative bandwidth)for dual polarizations.展开更多
基金National Natural Science Foundation of China(52071126)Natural Science Foundation of Tianjin City,China(22JCQNJC01240)+2 种基金Central Guidance on Local Science and Technology Development Fund of Hebei Province(226Z1009G)Special Funds for Science and Technology Innovation in Hebei(2022X19)Anhui Provincial Natural Science Foundation(2308085ME135)。
文摘Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.
基金National Natural Science Foundation of China(52161009)Innovation Project of Postgraduate Students in North Minzu University(YCX24104)。
文摘To improve the high-temperature oxidation resistance of TiAlNb9 alloy,a Cr-Al-Y co-deposition coating was prepared on the alloy surface by the pack cementation method.The microstructure of the coating was analyzed by scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer,and the high-temperature oxidation properties of the substrate and coating at 1273 K were compared and studied.The results show that the Cr-Al-Y coating is about 30μm in thickness,and it has a dense structure and good film-substrate bonding.The coating includes an outer layer composed of TiCr_(2),TiCr,Ti_(4)Cr,and(Ti,Nb)Cr_(4) phases as well as an inner layer composed of Ti_(2)Al,and Nb-richγ-TiAl interdiffusion zone.The TiAlNb9 substrate forms an oxide layer composed of TiO_(2) and Al_(2)O_(3) at 1273 K.Due to its loose and porous structure,TiO_(2) oxide film cannot effectively isolate the internal diffusion of element O,resulting in continuous oxidation damage to the substrate.The Cr-Al-Y co-deposition coating forms a dense Cr_(2)O_(3) and Al_(2)O_(3) oxide layer during oxidation,effectively preventing the internal diffusion of element O and significantly improving the high-temperature oxidation resistance of the substrate alloy.
基金supported by the National Science and Technology Major Project(No.HT-J2019-VI-0020-0136)the National Youth Talent Support Program,and the Fundamental Research Funds for the Central Universities(No.xtr072024004).
文摘Surface recrystallization(RX) is a typical grain defect observed in directionally solidified(DS) Ni-based superalloys. Most studies have focused on the RX behavior and its impact on the mechanical properties of single-crystal(SC) superalloys, with limited research on its influence on the high-temperature mechanical properties of DS superalloys. This study systematically investigated the effect of RX on the high-temperature tensile properties of a DS DZ409 superalloy. The results show that at 650℃, the yield strength decreases almost linearly with an increase in RX fraction. A significant reduction in elongation is observed as the RX fraction increases from 0% to 4.9%. However, beyond this point, further increase in RX fraction leads to minimal changes in elongation. At 950℃, both yield strength and elongation decrease as the RX fraction increases from 0% to 4.9%. At 650℃, fractures in the RX DS superalloys exhibit a mixed mode of transgranular and intergranular cleavage fracture, while at 950℃, it features a combination of ductile and intergranular dimple fractures. The failure mechanism of the RX DS superalloy is associated with the introduction of transverse grain boundaries(GBs) during RX. In the early stages of tensile testing at intermediate and high temperatures, cracks can easily initiate at these GBs. Subsequently, the cracks propagate along the GBs into the DS matrix, ultimately leading to failure of the DS superalloy.
基金supported by the National Natural Science Foundation of China(No.52075249)the Tianyuan Laboratory Fund(No.24-JSKY-ZZKT-14).
文摘In the fields of optoelectronics and semiconductors, reliable fixation and handling of brittle materials (glass, wafer, etc.) in high-temperature, vacuum, and vibration environments face particular technical challenges. These challenges include the inability of suction cups in a vacuum, the residue of chemical adhesives, and the easy damage of mechanical clamping. In this paper, fluorine-based bionic adhesive pads (FBAPs) obtained using molding technology to imitate gecko micropillar arrays are presented. FBAPs inhibit the substantial decay of adhesive properties at high temperatures and provide stable and reliable performance in vacuum and vibration environments. The results demonstrated that the decayed force values of the normal and tangential strength of the FBAP were only 9.01% and 5.82% of the planar samples when warmed up to 300℃ from 25℃, respectively. In a vacuum, all FBAPs exhibit less than 20% adhesion attenuation, and in a vibrational environment, they can withstand accelerations of at least 4.27 g. The design of the microstructure arrays enables the realization of efficient and non-destructive separation through mechanical rotation or blowing. It provides a bionic material basis for the fixation of brittle materials on smooth surfaces under complex environments and for transportation automation.
基金funded by the National Natural Science Foundation of China,grant number 52406102,received by Haiyan YuShandong Provincial Natural Science Foundation,grant number ZR2023QE258,received by Haiyan Yu.
文摘High-temperature radiative cooling is essential for solar absorbers,as it mitigates efficiency degradation resulting from thermal accumulation.While porous structures have proven effective in enhancing absorber performance,practical manufacturing processes and prolonged operational wear inevitably introduce surface roughness and structural deviations,which profoundly impact radiative properties.This study constructs a ZnS/Ag solar absorber model with surface roughness and employs the finite-difference time-domain method to investigate how characteristic length,surface roughness,porosity,pore shape factor,and taper influence its radiative properties in the 3μm-5μm band at 750 K.Results show optimal absorption at a 1μm characteristic length with a 36.72%improvement compared to the model with l=0.25μm,increased absorption with higher porosity with a 69.29%improvement at 0.6 compared to the non-porous structure,lower circularity with a 19.03%improvement for C=0.89 compared to C=1.00,while surface roughness with a 61.24%improvement at RMS=0.031 compared to RMS=0 and taper with a 38.29%improvement at β=20°compared to β=0°also exert significant effects.This work provides engineering design guidelines for high-efficiency,low-cost absorbers.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金Supported by the Shanxi Province Grant(202203021212007,2023SHB003).
文摘Hydrogen peroxide(H_(2)O_(2))oxidation and reduction reactions(HPOR/HPRR)are pivotal in various innovative electrochemical energy conversion devices.A comprehensive understanding of these mechanisms is critical for catalyst design and performance improvement in these applications.In this work,we systematically investigate the HPOR/HPRR mechanisms on low-index Pt surfaces,specifically Pt(111),Pt(100)and Pt(110),through density functional theory(DFT)calculations combined with the computational hydrogen electrode(CHE)model.For HPOR,all the low-index Pt surfaces exhibit a unified potential-determining step(PDS)involving the electrochemical oxidation of hydroperoxyl intermediates(HOO*).The binding free energy of HOO*(Δ_(GHOO*))emerges as an activity descriptor,with Pt(110)exhibiting the highest HPOR activity.The HPRR mechanism follows a chem-electrochemical(C-EC)pathway.The rate-determining step(RDS)of HPRR is either the cleavage of the HO-OH bond(chemical)or the reduction of HO(electrochemical),depending on their respective activation energies.These activation energies are functions of the HO*binding free energy,Δ_(GHO*),establishingΔ_(GHO*)as the descriptor for HPRR activity prediction.Pt(111)and Pt(100)are identified as the most active HPRR catalysts among the studied metal surfaces,although they still experience a significant overpotential.The scaling relationship betweenΔ_(GHOO*)andΔ_(GHO*)reveals a thermodynamic coupling of HPOR and HPRR,explaining their occurrence on Pt surfaces.These findings provide important insights and activity descriptors for both HPOR and HPRR,providing valuable guidance for the design of electrocatalysts in H_(2)O_(2)-related energy applications and fuel cells.
基金the Scientific and Technological Research Council of Türkiye(TÜBiTAK).
文摘This study investigated surface roughness,the wettability behavior,and surface energy of Co-based alloy specimens textured using the biomimetic Laser Surface Texturing(LST)method.The surface texture was inspired by the patterns found on marine shells.The impacts of the parameters on wettability,Surface Free Energy(SFE),surface topography,and texture roughness generated by the laser beam tracking a spiral path were investigated.Reducing spiral pitch produces more complicated and chaotic surface patterns.Most surfaces are hydrophobic,and surface roughness and topography influence the Contact Angle(CA).Topography and roughness were affected by frequency and scanning speed;a decrease in scanning speed and frequency generated more chaotic and irregular surface textures.With general factorial analysis and Analysis of Variance(ANOVA),our statistical study reveals that accounting for 88%of the influence,the scanning speed is the primary factor influencing surface roughness.On the other hand,the spiral pitch is essential for defining the struc-tural features of the surface,even if it less influences roughness.The SFE of laser-textured CoCr28Mo alloy specimens was optimizable within the range of 14-32 mN/m.The relevant findings offer valuable insights into optimizing LST for the specific surface properties of the Co-based alloy.
基金supported by the Science and Technology Research Project of Henan Province(No.232102241014)the Key scientific research project of Henan Province Colleges and Universities(No.22A470002)Doctoral Fund Project of Henan Polytechnic University(No.B2021-37).
文摘This study experimentally investigates the influence of surfacewettability on the frosting characteristics of three types of corrugated structures(Types A,B,and C)under controlled low-temperature conditions.The experiments were conducted in a constant-temperature bath at a cold surface temperature of–5℃,relative humidity of 90%,and ambient air temperature of 10℃.The results reveal that the variation trends of frost morphology,frost mass,and frost layer thickness are generally consistent across surfaces with different wettability.Among the tested surfaces,frost crystal formation and complete surface coverage occurred latest on the superhydrophobic surface(CA=153.9–165.8℃),next on the bare aluminumsurface(75.3–83.2℃),and earliest on the hydrophilic surface(5.3–7.5℃).At the same frosting duration,the superhydrophobic surface exhibited a sparse and fluffy frost layer,the bare aluminum surface formed a rough and dense frost,while the hydrophilic surface developed a fine and compact frost layer.The amount of frost formation decreased in the order of hydrophilic>bare aluminum>superhydrophobic,indicating that the superhydrophobic surface provides the most significant anti-frosting effect during the initial stages of frost formation.For instance,on the Type A corrugated structure,after 15 min of frosting,the frost mass on the superhydrophobic surface was 38.78%and 68.45%lower than those on the bare aluminum and hydrophilic surfaces,respectively.After 30 min,these differences were 4.99%and 25.26%,respectively.Overall,the superhydrophobic surface exhibited the smallest frost mass and frost layer thickness,demonstrating superior anti-frosting performance compared with the other surface types.
基金supported by the National Natural Science Foundation of China (52172228)the Natural Science Foundation of Fujian Province (2024J01475 and 2023J05127)
文摘Lithium-sulfur batteries(LSBs)represent a next-generation energy storage technology,but widespread applications are restricted by the shuttle of lithium polysulfides(LiPSs).The rational design of separators has been demonstrated to be one of the most efficient and cost-effective strategies to curb the shuttle effect,and tremendous research progress has been achieved.The efficiency of a separator depends on its interaction with LiPSs,which is governed by the surface energy and binding strength.Despite several review works that have been reported to advance the separators,most of them primarily focus on active material innovation and construction.The most crucial issues of surface binding energy have not been systematically reviewed,limiting the precise design of efficient separators.In this review,fundamentals related to surface energy and binding interactions with LiPSs are comprehensively analyzed and discussed.With surface binding and energy main lines,the advancements in separator engineering strategies are elaborately summarized and discussed.Moreover,techniques for evaluating affinity to LiPSs are thoroughly analyzed to avoid any ambiguities in measurement.Based on the research context,valuable research directions are suggested to construct efficient separators.This work provides guidelines to regulate the surface binding and energy of separators for high-performance LSBs.
基金supported by the National Natural Science Foundation of China(Grant Nos.U22A20106,52201112,and U22A20173)Fundamental Research Funds for the Central Universities(N25LJ002).
文摘Coating-free press-hardened steel(CF-PHS)had effectively tackled the challenge of high-temperature oxidation during processing through Cr-Si alloying strategy.However,it is equally essential to investigate its corrosion resistance and the role of the oxide scale in corrosion environments.The corrosion resistance of CF-PHS with and without oxide scale was comprehensively evaluated by analyzing electrochemical processes and corrosion products,as well as characterizing the corroded oxide scale features,while comparing it with commercial 22MnB5 steel.The results indicate that CF-PHS exhibits superior corrosion resistance compared to 22MnB5 steel and the presence of oxide scale may have a negative influence on short-time corrosion resistance.The ultra-thin oxide scale is unable to effectively and timely mitigate pit propagation during the rapid electrochemical tests.Conversely,during the prolonged corrosion process,the oxide scale can still function as the physical barrier to provide protective effects,making the corrosion process develop more slowly and evenly.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
基金financial support from the National Natural Science Foundation of China(No.52035012)the Guangdong Basic and Applied Basic Research Foundation(No.2025A1515012203)。
文摘The specific surface area(S S)and pore size(D)exhibit an inherent trade-off in the microscale design of bone implants:larger pores typically correlate with reduced surface area and vice versa.This relationship has attracted notable attention because of its critical role in the regulation of cell adhesion and osteogenesis.However,it remains largely unclear how S S and D affect the generated bone tissue and dynamically change during long-term osteogenesis.Herein,by applying rigorous geometric mapping to minimal surfaces,we constructed precisely partitioned and layer-by-layer thickened tissue models to simulate osteogenesis across different temporal scales and thereby track the dynamic evolution of geometric characteristics,permeability,and mechanobiological tissue differentiation.The high-S S samples were found to facilitate the rapid formation of new bone tissue in the early stages.However,their smaller pores tended to cause occlusions,hindering further tissue development.In contrast,low-S S samples showed slower bone regeneration,but their larger pores provided adequate physical space for tissue regeneration and mass transport,ultimately promoting bone formation in the long term.Mechanobiological regulation suggests that fibrous tissue formation inhibits additional bone formation,establishing a dynamic equilibrium between osteogenesis and pore space to sustain nutrient/waste exchange throughout the regenerative process.Overall,smaller pores are preferable in implants for minimally loaded osteoplasty procedures focused on early-stage bone consolidation,whereas larger pores are preferable in dynamically loaded implants requiring prolonged mechanical stability.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金National Natural Science Foundation of China(No.U2241205)the Natural Science Basic Research Program of Shaanxi(Nos.2022JC-33,2023-GHZD-35,and 2024JC-ZDXM-25)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National 111 Project to provide fund for conducting experiments。
文摘In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.
文摘The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."
文摘Photodetectors can convert light energy into electrical signals,so are widely used in photovoltaics,photon counting,monitoring,and imaging.Photodetectors are easy to prepare high-resolution photochips because of their small size unit integration.However,these photodetector units often exhibit poor photoelectric performance due to material defects and inadequate structures,which greatly limit the functions of devices.Designing modification strategies and micro-/nanostructures can compensate for defects,adjust the bandgap,and develop novel quantum structures,which consequently optimize photovoltaic units and revolutionize optoelectronic devices.Here,this paper aims to comprehensively elaborate on the surface/interface engineering scheme of micro-/nano-photodetectors.It starts from the fundamentals of photodetectors,such as principles,types,and parameters,and describes the influence of material selection,manufacturing techniques,and post-processing.Then,we analyse in detail the great influence of surface/interface engineering on the performance of photovoltaic devices,including surface/interface modification and micro-/nanostructural design.Finally,the applications and prospects of optoelectronic devices in various fields such as miniaturization of electronic devices,robotics,and human–computer interaction are shown.
基金Wuxi University Research Start-up Fund for Introduced Talents(Grant No:2024r031)Technology Development Contract(Contract Registration Number:2024320205000963)+1 种基金National Natural Science Foundation of China(Grant No.52275288)Ningbo Key Research and Development Plan(Grant No.2023Z022).
文摘To solve the problem of abnormal abrasion of Cu-Based Friction Materials(CBFMs),Bionic Non-Smooth Surface(BNS)on friction surface of CBFMs was constructed based on bionic principles,and the optimal bionic prototype was selected by Finite Element Method(FEM).In addition,the bionic parameters were optimized by Response Surface Method(RSM).Samples holding BNS were prepared by Laser Processing,tribological properties were tested by a Friction and Wear Tester and worn surface morphology was characterized by a Scanning Electron Microscope(SEM).The results showed that BNS on friction surface could regulate the stress distribution and alleviate the peak stress.Among all samples,the coupled texture of pit-hexagonal got the minimum peak stress.During braking,bionic texture could also collect wear debris or change the motion forms from sliding to rotation,which can reduce abnormal abrasion.The wear rate was reduced by 19.31%.The results in this paper can provide a new idea for enhancing the tribological properties of CBFMs,and can also lay the foundation for further research of bionic tribology.
文摘In this study,polyacrylic acid(PAA)films were employed as a model system,and a series of PAA films with tunable water wettability was systematically prepared by varying molecular weight and curing temperature.Using attenuated total reflectance Fourier-transform infrared spectroscopy(ATR-FTIR),the molecular configurations of surface carboxyl groups(COOH),free carboxyl(COOH_(f))and hydrogen-bonded carboxyl(COOH_(HB),were directly correlated with the polar component of surface energy(γ^(s,p)).By decomposing theγ^(s,p)values of the PAA thin films as a sum of the contributions of COOH_(f)and COOH_(H B),the intrinsic polar component of surface energy of COOH_(H B)(γ_(H B)^(s,p*))was quantified for the first time as 8.34 mN/m,significantly lower than that of COOH_(f)(γ_(f)^(s,p*)=34 mN/m).This result highlights that hydrogen bonding markedly reduces theγ^(s,p),providing a rational explanation for the relatively large water contact angle observed on PAA thin films.Furthermore,it establishes a thermodynamic basis for estimating the fraction of surface COOH_(H B)groups(f H B)from wettability measurements.Further extension of the model to carboxyl-terminated self-assembled monolayers(COOH-SAMs)revealed that surface COOH density(ΣCOOH)critically regulates wetting behavior:whenΣCOOH ranges from 4.30 to 5.25 nm^(-2),COOH groups predominantly exist in a free state and facilitate effective hydration layers,thereby promoting superhydrophilicity.Overall,this study not only establishes a unified thermodynamic framework linking surface COOH configurations to macroscopic wettability,but also validates its universality by extending it to COOH-SAMs systems,thereby providing a unified theoretical framework for the controllable design of hydrophilicity in various COOH-functionalized surfaces.
基金supported by the National Key Research and Development Program of China(2023YFB3907304-3)the National Natural Science Foundation of China(NSFC)(62271050)。
文摘A methodology for the reduction of radar cross section(RCS)of cambered platforms within the target airspace is presented,which utilizes a dual-polarized ultra-wide-angle artificial electromagnetic absorbing surface.By applying the theory of generalized Brewster complex wave impedance matching,five distinct unit cell designs are developed to attain more than95%absorption rate for dual-polarized incident waves within five angular ranges:0°-30°,30°-50°,50°-60°,60°-70°,and 70°-80°.To optimally reduce the RCS of a cambered platform,the five types of units can be evenly distributed on the surface based on the local incident angles of plane waves originating from the target airspace.As an illustrative example,the leading edge of an airfoil is taken into account,and experimental measurements validate the efficiency of the proposed structure.Specifically,the absorbing surface achieves more than 10 dB of RCS reduction in the frequency ranges from 5-10 GHz(about66.7%relative bandwidth)for dual polarizations.
