Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,a...Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.展开更多
Powder metallurgy was used to fabricate TiC-NiCr cermets and the oxidation behavior at 900℃ was investigated.Results reveal that TiC-NiCr cermets have uniform structures with excellent mechanical properties,whose har...Powder metallurgy was used to fabricate TiC-NiCr cermets and the oxidation behavior at 900℃ was investigated.Results reveal that TiC-NiCr cermets have uniform structures with excellent mechanical properties,whose hardness is 65 HRC and flexural strength is 1450 MPa.The high-temperature oxidation mechanism of TiC-based cermets was investigated through an X-ray diffractometer and scanning electron microscope.The added elements Ni and Cr along with their solid solutions not only bond with the hard phase TiC to ensure the physical performance of the cermet,but also impede the internal diffusion during oxidation by forming a dense composite oxide layer,thereby enhancing the oxidation resistance.The TiC-NiCr cermet exhibits a dense protective oxide layer at 900℃ and can endure continuous oxidation for approximately 1000 h.A methodology for fabricating TiC-NiCr metal matrix composites is proposed,and their oxidation resistance is evaluated,providing a theoretical and practical basis for simultaneously enhancing the mechanical properties and oxidation resistance and reducing production costs.展开更多
The high-temperature oxidation resistance of AISI 321 stainless steel used in solar thermal power heat exchangers determines its service life.In this study,aluminizing and subsequent laser shock peening(LSP)treatments...The high-temperature oxidation resistance of AISI 321 stainless steel used in solar thermal power heat exchangers determines its service life.In this study,aluminizing and subsequent laser shock peening(LSP)treatments were employed to improve the high-temperature oxidation resistance of AISI 321 stainless steel at 620°C.These two treatments decreased the oxidation rate of AISI 321 steel.Specifically,the optimal oxidation resistance was observed in aluminized steel before oxidation for 144 h owing to the increased entropy of the LSP-treated specimen.After 144 h,LSP-treated steel achieved the best oxidation resistance because of the formation of a protectiveα-Al2O3film.Moreover,the large amount of subgrain boundaries formed on the aluminized layer of the LSP-treated samples could act as short-circuit paths for the outward diffusion of Al,facilitating the rapid nucleation ofα-Al2O3.Meanwhile,the aluminized layer could isolate the contact between the oxidation environment and matrix,thereby decreasing the oxidation rate.Furthermore,the minimum oxidation parabolic constant was calculated for LSP-treated steel(6.45787×10^(-14)),which was 69.18%and 36.36%that of aluminized and 321 steel,respectively,during the entire oxidation process.Therefore,the combination of aluminizing and LSP treatments can improve the high-temperature oxidation resistance of 321 stainless steel,providing a new idea for its surface treatment to achieve a long service life at high temperatures.展开更多
SnS,a well-known van der Waals chalcogenide,is susceptible to oxidation in high-temperature or highhumidity environments,significantly impacting its functional performance and device stability.Conversely,oxidation can...SnS,a well-known van der Waals chalcogenide,is susceptible to oxidation in high-temperature or highhumidity environments,significantly impacting its functional performance and device stability.Conversely,oxidation can be used as an effective strategy for surface engineering,allowing for structure modulation or design,property tuning and application exploration.However,there is currently a gap in understanding the relationship between the oxidation behavior of SnS,the structure of its oxidized surface,and the dependence on oxidation temperature.In this study,we systematically investigated the evolution of SnS surfaces under thermal oxidation using electron microscopy.The microstructure evolution(e.g.,surface structures,phases,defects,and interface)of SnS during high-temperature oxidation has been fully characterized and studied based on cross-sectional samples.Various surface heterostructures were constructed,including SnO_(2)/SnS,SnO_(2)/SnS_(2)/SnS,and SnO_(2)/Sn_(2)S_(3)/SnS,offering significant potential for the surface functionalization of SnS-based systems.Accordingly,oxidation mechanisms at different stages were elucidated based on the detailed and clear picture of microstructures.This research not only deepens our understanding of the fundamental science of SnS oxidation but also provides valuable insights for preventing and developing surface oxidation engineering in SnS and other van der Waals chalcogenides/materials.展开更多
Twinning-induced plasticity (TWIP) steel shows great potential in engineering due to its excellent strength and ductility synergy, and strengthening research on its corrosion resistance and high-temperature oxidation ...Twinning-induced plasticity (TWIP) steel shows great potential in engineering due to its excellent strength and ductility synergy, and strengthening research on its corrosion resistance and high-temperature oxidation resistance is critical for broader applications. Herein, the effect of annealing temperature on the high-temperature oxidation and corrosion behavior of Fe-Mn-Cr-Al-Cu-C TWIP steel is investigated. The results show that increasing the annealing temperature from 700℃ to 1100℃ reduced the mass gain of the TWIP steel oxidized at 800℃ for 8 h from 1.93 to 0.58 mg·cm^(−2). Additionally, the self-corrosion current density decreases from 6.52 × 10^(−6) to 1.32 × 10^(−6) A·cm^(−2), while charge transfer resistance increases from 1461 to 3339 Ω·cm^(−2). The reduction in grain boundaries and dislocation density in the TWIP steel attributed to the increase in annealing temperature inhibits short-circuit diffusion, local galvanic corrosion and pitting, ultimately improving both oxidation and corrosion resistance. Moreover, high-temperature annealing prevents the formation of carbon-rich compounds and ensures uniform element distribution. The accumulation of Cu and Cu-rich products formed at the interface further protects against Cl− erosion, inhibiting pitting and local corrosion, thus enhancing the corrosion resistance of the TWIP steel.展开更多
The effects of niobium on the high-temperature oxidation resistance of austenitic stainless steel were systematically investigated.Two austenitic stainless steels with different Nb contents were prepared and exposed t...The effects of niobium on the high-temperature oxidation resistance of austenitic stainless steel were systematically investigated.Two austenitic stainless steels with different Nb contents were prepared and exposed to air at 850℃for 200 h.Results show that Nb positively affects the high-temperature oxidation resistance of austenitic stainless steels.The matrix organization of austenitic stainless steels with added niobium does not change,while the austenitic grain size is significantly refined,and it also promoted the release of internal stresses in the oxide film,which in turn improved the integrity of the oxide film and adhesion to the substrate.In addition,with the addition of Nb element,a large number of Nb(C,N)particles are diffusely distributed in the matrix.Nb(C,N)phase distributed in the matrix and the niobium-rich layer formed by the diffusion of niobium into the interface between the metal matrix and the oxide film during the high-temperature oxidation process effectively prevents the diffusion of iron into the outer layer and enhances the oxidation resistance at high temperatures.展开更多
The high melting point element W and the rare earth element Ce were added to 18Cr-Mo(444-type)ferritic stainless steel to improve its high-temperature oxidation resistance in exhaust gas.A simulated exhaust gas was fi...The high melting point element W and the rare earth element Ce were added to 18Cr-Mo(444-type)ferritic stainless steel to improve its high-temperature oxidation resistance in exhaust gas.A simulated exhaust gas was filled in the simultaneous thermal analyzer to simulate the service environment,and the oxidation behavior in high-temperature exhaust gas environment of 444-type ferritic stainless steel alloyed with W and Ce was investigated.The oxide structure and composition formed in this process were analyzed and characterized by scanning electron microscopy/energy-dispersive spectroscopy and electron probe analysis,and the mechanism of W and Ce in the oxidation process was revealed.The results show that 18Cr-Mo ferritic stainless steel containing W and Ce has better oxidation resistance in high-temperature exhaust gas.The element W can promote the precipitation of Laves phase at the matrix/interface,inhibit the interface diffusion of oxidizing elements and prevent the inward growth of the oxide film.The element Ce can suppress the volume of SiO_(2)at the oxide film/interface,reducing the breakaway oxidation caused by cracking of the oxide film.The CeO_(2)provides nucleation sites for oxide particles,promoting the healing of cracks and voids within the oxide film.展开更多
Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb...Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.展开更多
In this study,the oxidation behavior of Ti42Al5Mn,Ti42Al5Mn0.5 W,Ti42Al5Mn0.5W0.1B,and Ti42Al5Mn0.8 W was investigated at 800℃.Due to the inability to form a dense protective Al2O_(3) layer,Ti42Al5Mn suffered severe ...In this study,the oxidation behavior of Ti42Al5Mn,Ti42Al5Mn0.5 W,Ti42Al5Mn0.5W0.1B,and Ti42Al5Mn0.8 W was investigated at 800℃.Due to the inability to form a dense protective Al2O_(3) layer,Ti42Al5Mn suffered severe spallation during oxidation at 800℃and the mass gain was significant.The intermediate layer between the scale and the substrate was first composed of Laves/Z phase but changed toα2/Z phase with prolonged oxidation.The intermediate layer with high Ti/Al ratio favors the forma-tion of a thick Al2O_(3)+TiO_(2) mixed layer in the oxide scale which is prone to initiate cracks and cause the spalling of oxides.The doping of W in TiO_(2) effectively inhibited its generation and promoted the for-mation of a dense Al2O_(3) layer,resulting in a significant improvement in the oxidation resistance of the alloy.Compared to Ti42Al5Mn alloy,Ti42Al5Mn0.8 W showed no spallation after 300 h cyclic oxidation and the kinetic curve changed from liner law to parabolic law.The intermediate layer of Ti42Al5Mn0.8 W alloy was composed of a single Laves phase and remained unchanged even after 1000 h oxidation at 800℃,offering a favorable basis for the generation of a stable protective oxide layer in the alloy.The addi-tion of 0.1 at.%B to Ti42Al5Mn0.5 W alloy refined its microstructure and further improved its spallation resistance to a level close to that of Ti42Al5Mn0.8 W alloy.展开更多
In this paper,the isothermal oxidation experiments were used to study the effect of Ag on the high-temperature oxidation behavior of Mg-6.5Gd-5.6Y-0.1Nd-0.01Ce-0.4Zr(wt%)alloy oxidized at 350℃,400℃ and 450℃ for 120...In this paper,the isothermal oxidation experiments were used to study the effect of Ag on the high-temperature oxidation behavior of Mg-6.5Gd-5.6Y-0.1Nd-0.01Ce-0.4Zr(wt%)alloy oxidized at 350℃,400℃ and 450℃ for 120 h.The results show that the oxidation weight gain of the alloy mainly occurs in the early oxidation stage(0-20 h).This reason attributes to the lack of protective oxide film and the rapid inward diffusion of oxygen through the macroscopic defects of the incomplete oxide film.When dense oxide films such as Y_(2)O_(3),Gd_(2)O_(3),and ZrO2 form,they hinder the inward transport of oxygen ions and improve the high-temperature oxidation resistance of the alloy.In addition,the role of the Ag element at three temperatures is different.The addition of Ag mainly promotes the formation of eutectic phases such as Mg3Gd,Mg24Y5,and Ag2Gd,which reduces the content of Gd and Y elements in the alloy matrix,resulting in a decrease in the diffusion rate of Gd and Y elements during the oxidation process at 350℃ and 400℃,and weakens the oxidation resistance of Ag-containing alloys.However,in the oxidation experiment at 450℃,a large amount of eutectic phase is solid dissolved into the matrix,reducing the difference in element content.At this time,it is detected that the Ag element promoted the outward diffusion of Gd and Y elements,accelerating the formation of the oxide film.The oxidation resistance of Ag-containing alloys is improved.展开更多
The presence of excess Ta in high-temperature protective coatings can compromise the integrity of the Al_(2)O_(3)scale on the surface,which has a negative impact on the oxidation behavior and reduces the service life....The presence of excess Ta in high-temperature protective coatings can compromise the integrity of the Al_(2)O_(3)scale on the surface,which has a negative impact on the oxidation behavior and reduces the service life.The effects of oxygen doping on the isothermal oxidation of three sputtered nanocrystalline coatings were investigated at 1100°C.The results indicated that oxygen doping inhibited the diffusion of Ta from the coating to the oxide scale,which was primarily attributed to the preferential oxidation of the Al in the coating.However,excess oxygen doping decreased the amount of Al available for the formation of the Al_(2)O_(3)scale on the coating,thus reducing the inhibitory effect on Ta oxidation.Moreover,doping with excess O caused spalling of the oxide scale.Therefore,the right balance in O doping is crucial for suppressing Ta oxidation while maintaining the integrity of the oxide scale.展开更多
The oxidation behavior of WE43 magnesium alloy in dry air at three temperatures(225,440 and 525℃)and the corresponding corrosion performance of samples attached to oxide film in 3.5 wt%NaCl solution was investigated....The oxidation behavior of WE43 magnesium alloy in dry air at three temperatures(225,440 and 525℃)and the corresponding corrosion performance of samples attached to oxide film in 3.5 wt%NaCl solution was investigated.The results show that the oxide films formed at all three temperatures are a complex MgO·RE_(2)O_(3)·ZrO film with different compositions.The film formed at 225℃is flat and dense,whose components are 3.2MgO·1.8RE_(2)O_(3)·1ZrO.The oxidation ridges begin to form,and then gradually grow into nodular oxides and form a loose and porous oxide layer as the temperature increases to 525℃.The oxide films formed at all three temperatures improve the corrosion resistance of the alloy due to the MgO·RE_(2)O_(3)·ZrO,with the protective properties of oxide films following the order of 225℃>440℃>525℃,because the dense MgO·RE_(2)O_(3)·ZrO film formed at 225℃can provide better protection to the substrate than the loose oxide film formed at higher temperatures.展开更多
This work investigated the effect of Cr and Si on the mechanical properties and oxidation resistance of press hardened steel.Results indicated that the microstructure of the Cr-Si micro-alloyed press hardened steel co...This work investigated the effect of Cr and Si on the mechanical properties and oxidation resistance of press hardened steel.Results indicated that the microstructure of the Cr-Si micro-alloyed press hardened steel consisted of lath martensite,M_(23)C_(6)carbides,and retained austenite.The retained austenite and carbides are responsible for the increase in elongation of the micro-alloyed steel.In addition,after oxidation at 930℃for 5 min,the thickness of the oxide scales on the Cr-Si micro-alloyed press hardened steel is less than 5μm,much thinner than 45.50μm-thick oxide scales on 22MnB5.The oxide scales of the Cr-Si micro-alloyed steel are composed of Fe_(2)O_(3),Fe_(3)O_(4),mixed spinel oxide(FeCr_(2)O_(4)and Fe_(2)SiO_(4)),and amorphous SiO_(2).Adding Cr and Si significantly reduces the thickness of the oxide scales and prevents the generation of the FeO phase.Due to the increase of spinel FeCr_(2)O_(4)and Fe_(2)SiO_(4)phase in the inner oxide scale and the amorphous SiO_(2)close to the substrate,the oxidation resistance of the Cr-Si micro-alloyed press hardened steel is improved.展开更多
Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the...Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the oxidation resistance of the electrodeposited Ni-La2O3/CeO2 composites in air at 1000 °C was studied. The results indicate that, compared with the electrodeposited Ni-film, Ni-La2O3/CeO2 composites exhibit a superior oxidation resistance due to the codeposited La2O3 or CeO2 particles blocking the outward diffusion of nickel. Moreover, compared with nanoparticles, La2O3 or CeO2 microparticles have stronger effect because La2O3 or CeO2 microparticles also act as a diffusion barrier layer at the onset of oxidation.展开更多
Chromium oxide ceramic materials are widely used in high-temperature applications requiring high wear resistance and lubricity.To further improve the friction and wear performance and high-temperature stability of chr...Chromium oxide ceramic materials are widely used in high-temperature applications requiring high wear resistance and lubricity.To further improve the friction and wear performance and high-temperature stability of chromium oxide thin films,this study attempted to dope rare earth(RE)element Y(yttrium)and deposited CrYO high-temperature self-lubricating ceramic thin films with different doping levels on the surface of IN718 alloys by using multi-arc ion plating technology.The deposited films were annealed at 1000℃for 2 h under atmospheric conditions to analyze the changes in phase composition and thickness,and the friction and wear characteristics of the CrYO films were tested using a high-temperature friction and wear tester in the temperature range of 25–600℃.The results show that the CrYO-2 film has a dense multilayer structure,and the multilayer oxide film produces interlayer sliding under frictional shear,thus providing lubrication.In particular,the friction coefficients are as low as about 0.25 in the middle and high-temperature sections(400,600℃),which provides good high-temperature tribological properties.In addition,the doping of Y elements dramatically affects the formation of the oxide layer and the distribution of voids in the film,changing the diffusion process of the elements of the base material inside the film and at the film-air interface at high temperatures.After two annealing treatments,the film thickness increased from 1.81 to 2.25μm,and the volume expansion of the films was effectively controlled compared with that of the Cr_(2)O_(3)films.展开更多
The development of alloys with high antioxidation performance is limited by the ambiguous details of the oxidation mechanism.Here,based on the structures of internal oxides detected by high-resolution transmission ele...The development of alloys with high antioxidation performance is limited by the ambiguous details of the oxidation mechanism.Here,based on the structures of internal oxides detected by high-resolution transmission electron microscopy,a hybrid method combining first-principles calculation,climb image nudged elastic band method and quasi-harmonic Debye model has been implemented to explain the oxidation mechanism with an emphasis on the origin of delamination and cracking.The results showed that the delamination of oxides corresponds to the acceleration of diffusion of Cr element caused by lamellar structures.The reduction in the cracking occurrence at high temperature mainly results from the smaller bulk modulus of oxides.Furthermore,the stronger chemical bonds promoted by lamellar structures also correspond to the higher crackingresistance.展开更多
In this paper,Si coatings were sprayed onto C/SiC composite substrates by atmospheric plasma spraying(APS).The high-temperature oxidation behavior of the substrate and coating at temperatures of 1100 and 1300℃was als...In this paper,Si coatings were sprayed onto C/SiC composite substrates by atmospheric plasma spraying(APS).The high-temperature oxidation behavior of the substrate and coating at temperatures of 1100 and 1300℃was also studied.The C/SiC ceramic matrix composite will be damaged seriously and even failed due to the oxidation of carbon fibers in matrix.The Si coating effectively improved the oxidation resistance of the C/SiC substrate in the high-temperature oxidation test.The effect of the thickness of the Si coatings on the oxidation resistance was investigated.The 150-μm coating is proved to enable the substrate to have the lowest oxidation weight loss and the best oxidation resistance after static oxidation for 5 h.展开更多
In this study,we investigated the oxidation of the Mg-11Y-1Al alloy at 500℃in an Ar-20%O2environment.Multiscale analysis showed the network-like long-period stacking ordered(LPSO)phase transformed into needle-like LP...In this study,we investigated the oxidation of the Mg-11Y-1Al alloy at 500℃in an Ar-20%O2environment.Multiscale analysis showed the network-like long-period stacking ordered(LPSO)phase transformed into needle-like LPSO and polygonal Mg24Y5 phases,leading to the formation of a high-dense network of needle-like oxides at the oxidation front.These oxides grew laterally along the oxide/matrix interfaces,forming a thicker,continuous scale that effectively blocked elemental diffusion.Hence,the preferential oxidation along the needle-like LPSO is believed to accelerate the formation of a thicker and continuous oxide scale,further improving the oxidation resistance of the Mg-11Y-1Al alloy.展开更多
The high-temperature oxidation resistance of the nickel superalloy prepared by the laser powder bed fusion(LPBF)has been significantly increased as a result of in-situ formation of a thermal barrier layer(α-Al_(2)O_(...The high-temperature oxidation resistance of the nickel superalloy prepared by the laser powder bed fusion(LPBF)has been significantly increased as a result of in-situ formation of a thermal barrier layer(α-Al_(2)O_(3)+CaMoO4)during oxidative annealing of surface layers modified by electric spark treatment(EST).The reactive EST of the LPBF-built items based on nickel EP741NP alloy was carried out with low-melting Al−12%Si,Al−6%Ca−0.6%Si and Al−7%Ca−1%Mn electrodes.It was found that under EST done by Al−7%Ca−1%Mn electrode an intermetallic(β-NiAl+γ'-Ni3Al)15μm-thick layer reinforced by spherical oxide(CaMe)O nanoparticles was formed.Formation of that structure increases the wear resistance of LPBF nickel superalloy by 4.5 times.Further oxidative annealing at 1000°C leads to a formation of continuous two-layered coating with an inner layer ofα-Al_(2)O_(3) and an outer layer of CaMoO4,which together act as an effective barrier preventing the diffusion of oxygen into the bulk of the superalloy.展开更多
The oxidation behavior and mechanism of as-received and 30 % cold-rolled alumina-forming austenitic(AFA) steel were investigated in dry air at 700℃.The results show that the mass gain per unit area curves of as-recei...The oxidation behavior and mechanism of as-received and 30 % cold-rolled alumina-forming austenitic(AFA) steel were investigated in dry air at 700℃.The results show that the mass gain per unit area curves of as-received and 30 % cold-rolled steels subject to near-parabolic law before 100 h oxidation time.Two samples both show higher high-temperature oxidation resistance due to the formation of dense Al_(2)O_(3) oxide scale.Gradual spallation of outer scale results in the formation of continuous and dense alumina scale.Dislocations can act as short-circuit diffusion channel for the diffusion of Al from alloy matrix to surface,and also provide nucleation sites for B2-NiAl phase,which ensure the continuous formation of Al_(2)O_(3) scale.展开更多
基金National Natural Science Foundation of China(52071126)Natural Science Foundation of Tianjin City,China(22JCQNJC01240)+2 种基金Central Guidance on Local Science and Technology Development Fund of Hebei Province(226Z1009G)Special Funds for Science and Technology Innovation in Hebei(2022X19)Anhui Provincial Natural Science Foundation(2308085ME135)。
文摘Co-based alloy coating was prepared on Zr alloy using laser melting and cladding technique to study the difference in the high-temperature oxidation behavior between pure metal Co coatings and Co-T800 alloy coatings,as well as the wear resistance of the coatings.Besides,the effect of changing the laser melting process on the coatings was also investigated.The oxidation mass gain at 800–1200℃and the high-temperature oxidation behavior during high-temperature treatment for 1 h of two coated Zr alloy samples were studied.Results show that the Co coating and the Co-T800 coating have better resistance against high-temperature oxidation.After oxidizing at 1000℃for 1 h,the thickness of the oxide layer of the uncoated sample was 241.0μm,whereas that of the sample with Co-based coating is only 11.8–35.5μm.The friction wear test shows that the depth of the abrasion mark of the coated sample is only 1/2 of that of the substrate,indicating that the hardness and wear resistance of the Zr substrate are greatly improved.The disadvantage of Co-based coatings is the inferior corrosion resistance in 3.5wt%NaCl solution.
基金National Natural Science Foundation of China(52376076)Open Fund of Material Corrosion and Protection Key Laboratory of Sichuan Province(2023CL13)Laiwu Vocational and Technical College Teachers Research Fund(2023jsky05)。
文摘Powder metallurgy was used to fabricate TiC-NiCr cermets and the oxidation behavior at 900℃ was investigated.Results reveal that TiC-NiCr cermets have uniform structures with excellent mechanical properties,whose hardness is 65 HRC and flexural strength is 1450 MPa.The high-temperature oxidation mechanism of TiC-based cermets was investigated through an X-ray diffractometer and scanning electron microscope.The added elements Ni and Cr along with their solid solutions not only bond with the hard phase TiC to ensure the physical performance of the cermet,but also impede the internal diffusion during oxidation by forming a dense composite oxide layer,thereby enhancing the oxidation resistance.The TiC-NiCr cermet exhibits a dense protective oxide layer at 900℃ and can endure continuous oxidation for approximately 1000 h.A methodology for fabricating TiC-NiCr metal matrix composites is proposed,and their oxidation resistance is evaluated,providing a theoretical and practical basis for simultaneously enhancing the mechanical properties and oxidation resistance and reducing production costs.
基金Supported by National Natural Science Foundation of China(Grant Nos.52075048,51675058,12232004)Hunan Provincial Excellent Youth Project of the Education Department(Grant No.21B0304)+2 种基金Natural Science Foundation of Hunan Province(Grant No.2023JJ30025)Science and Technology Innovation Program of Hunan Province(Grant No.2023RC1058)Scientific Research Innovation Project for Graduate Student of Changsha University of Science and Technology(Grant No.CLSJCX22096)。
文摘The high-temperature oxidation resistance of AISI 321 stainless steel used in solar thermal power heat exchangers determines its service life.In this study,aluminizing and subsequent laser shock peening(LSP)treatments were employed to improve the high-temperature oxidation resistance of AISI 321 stainless steel at 620°C.These two treatments decreased the oxidation rate of AISI 321 steel.Specifically,the optimal oxidation resistance was observed in aluminized steel before oxidation for 144 h owing to the increased entropy of the LSP-treated specimen.After 144 h,LSP-treated steel achieved the best oxidation resistance because of the formation of a protectiveα-Al2O3film.Moreover,the large amount of subgrain boundaries formed on the aluminized layer of the LSP-treated samples could act as short-circuit paths for the outward diffusion of Al,facilitating the rapid nucleation ofα-Al2O3.Meanwhile,the aluminized layer could isolate the contact between the oxidation environment and matrix,thereby decreasing the oxidation rate.Furthermore,the minimum oxidation parabolic constant was calculated for LSP-treated steel(6.45787×10^(-14)),which was 69.18%and 36.36%that of aluminized and 321 steel,respectively,during the entire oxidation process.Therefore,the combination of aluminizing and LSP treatments can improve the high-temperature oxidation resistance of 321 stainless steel,providing a new idea for its surface treatment to achieve a long service life at high temperatures.
基金financially supported by the National Natural Science Foundation of China(Nos.11904039,52125103,52071041,U21A2054 and 12104071)。
文摘SnS,a well-known van der Waals chalcogenide,is susceptible to oxidation in high-temperature or highhumidity environments,significantly impacting its functional performance and device stability.Conversely,oxidation can be used as an effective strategy for surface engineering,allowing for structure modulation or design,property tuning and application exploration.However,there is currently a gap in understanding the relationship between the oxidation behavior of SnS,the structure of its oxidized surface,and the dependence on oxidation temperature.In this study,we systematically investigated the evolution of SnS surfaces under thermal oxidation using electron microscopy.The microstructure evolution(e.g.,surface structures,phases,defects,and interface)of SnS during high-temperature oxidation has been fully characterized and studied based on cross-sectional samples.Various surface heterostructures were constructed,including SnO_(2)/SnS,SnO_(2)/SnS_(2)/SnS,and SnO_(2)/Sn_(2)S_(3)/SnS,offering significant potential for the surface functionalization of SnS-based systems.Accordingly,oxidation mechanisms at different stages were elucidated based on the detailed and clear picture of microstructures.This research not only deepens our understanding of the fundamental science of SnS oxidation but also provides valuable insights for preventing and developing surface oxidation engineering in SnS and other van der Waals chalcogenides/materials.
基金support from the National Natural Science Foundation of China(Grant No.52174359)is greatly acknowledged.
文摘Twinning-induced plasticity (TWIP) steel shows great potential in engineering due to its excellent strength and ductility synergy, and strengthening research on its corrosion resistance and high-temperature oxidation resistance is critical for broader applications. Herein, the effect of annealing temperature on the high-temperature oxidation and corrosion behavior of Fe-Mn-Cr-Al-Cu-C TWIP steel is investigated. The results show that increasing the annealing temperature from 700℃ to 1100℃ reduced the mass gain of the TWIP steel oxidized at 800℃ for 8 h from 1.93 to 0.58 mg·cm^(−2). Additionally, the self-corrosion current density decreases from 6.52 × 10^(−6) to 1.32 × 10^(−6) A·cm^(−2), while charge transfer resistance increases from 1461 to 3339 Ω·cm^(−2). The reduction in grain boundaries and dislocation density in the TWIP steel attributed to the increase in annealing temperature inhibits short-circuit diffusion, local galvanic corrosion and pitting, ultimately improving both oxidation and corrosion resistance. Moreover, high-temperature annealing prevents the formation of carbon-rich compounds and ensures uniform element distribution. The accumulation of Cu and Cu-rich products formed at the interface further protects against Cl− erosion, inhibiting pitting and local corrosion, thus enhancing the corrosion resistance of the TWIP steel.
基金support of this work by the Major Program of Science and Technology in Shanxi Province(202202050201019)the National Natural Science Foundation of China(52271067)Shaanxi Outstanding Youth Fund Project(2021JC-45).
文摘The effects of niobium on the high-temperature oxidation resistance of austenitic stainless steel were systematically investigated.Two austenitic stainless steels with different Nb contents were prepared and exposed to air at 850℃for 200 h.Results show that Nb positively affects the high-temperature oxidation resistance of austenitic stainless steels.The matrix organization of austenitic stainless steels with added niobium does not change,while the austenitic grain size is significantly refined,and it also promoted the release of internal stresses in the oxide film,which in turn improved the integrity of the oxide film and adhesion to the substrate.In addition,with the addition of Nb element,a large number of Nb(C,N)particles are diffusely distributed in the matrix.Nb(C,N)phase distributed in the matrix and the niobium-rich layer formed by the diffusion of niobium into the interface between the metal matrix and the oxide film during the high-temperature oxidation process effectively prevents the diffusion of iron into the outer layer and enhances the oxidation resistance at high temperatures.
基金the joint financial support from the National Natural Science Foundation of China and Baowu Group Co.,Ltd.(Grant No.U1660205)the Fundamental Research Funds for the Central Universities(Grant No.N2007001).
文摘The high melting point element W and the rare earth element Ce were added to 18Cr-Mo(444-type)ferritic stainless steel to improve its high-temperature oxidation resistance in exhaust gas.A simulated exhaust gas was filled in the simultaneous thermal analyzer to simulate the service environment,and the oxidation behavior in high-temperature exhaust gas environment of 444-type ferritic stainless steel alloyed with W and Ce was investigated.The oxide structure and composition formed in this process were analyzed and characterized by scanning electron microscopy/energy-dispersive spectroscopy and electron probe analysis,and the mechanism of W and Ce in the oxidation process was revealed.The results show that 18Cr-Mo ferritic stainless steel containing W and Ce has better oxidation resistance in high-temperature exhaust gas.The element W can promote the precipitation of Laves phase at the matrix/interface,inhibit the interface diffusion of oxidizing elements and prevent the inward growth of the oxide film.The element Ce can suppress the volume of SiO_(2)at the oxide film/interface,reducing the breakaway oxidation caused by cracking of the oxide film.The CeO_(2)provides nucleation sites for oxide particles,promoting the healing of cracks and voids within the oxide film.
基金supported by the Class Ⅲ Peak Discipline of Shanghai,China-Materials Science and Engineering(High-Energy Beam Intelligent Processing and Green Manufacturing).
文摘Laser shock peening(LSP)was used to enhance the high-temperature oxidation resistance of laser melting deposited Ti45Al8Nb alloy.The microstructure and high-temperature oxidation behavior of the as-deposited Ti45Al8Nb alloy before and after LSP were investigated by scanning electron microscopy,X-ray diffraction,and electron backscatter diffraction.The results indicated that the rate of mass gain in the as-deposited sample after LSP exhibited a decrease when exposed to an oxidation temperature of 900℃,implying that LSP-treated samples exhibited superior oxidation resistance at high temperatures.A gradient structure with a fine-grain layer,a deformed-grain layer,and a coarse-grain layer was formed in the LSP-treated sample,which facilitated the diffusion of the Al atom during oxidation,leading to the formation of a dense Al_(2)O_(3)layer on the surface.The mechanism of improvement in the oxidation resistance of the as-deposited Ti45Al8Nb alloy via LSP was discussed.
基金National Natural Science Foundation of China(Grant No.51971215).
文摘In this study,the oxidation behavior of Ti42Al5Mn,Ti42Al5Mn0.5 W,Ti42Al5Mn0.5W0.1B,and Ti42Al5Mn0.8 W was investigated at 800℃.Due to the inability to form a dense protective Al2O_(3) layer,Ti42Al5Mn suffered severe spallation during oxidation at 800℃and the mass gain was significant.The intermediate layer between the scale and the substrate was first composed of Laves/Z phase but changed toα2/Z phase with prolonged oxidation.The intermediate layer with high Ti/Al ratio favors the forma-tion of a thick Al2O_(3)+TiO_(2) mixed layer in the oxide scale which is prone to initiate cracks and cause the spalling of oxides.The doping of W in TiO_(2) effectively inhibited its generation and promoted the for-mation of a dense Al2O_(3) layer,resulting in a significant improvement in the oxidation resistance of the alloy.Compared to Ti42Al5Mn alloy,Ti42Al5Mn0.8 W showed no spallation after 300 h cyclic oxidation and the kinetic curve changed from liner law to parabolic law.The intermediate layer of Ti42Al5Mn0.8 W alloy was composed of a single Laves phase and remained unchanged even after 1000 h oxidation at 800℃,offering a favorable basis for the generation of a stable protective oxide layer in the alloy.The addi-tion of 0.1 at.%B to Ti42Al5Mn0.5 W alloy refined its microstructure and further improved its spallation resistance to a level close to that of Ti42Al5Mn0.8 W alloy.
基金supported by the National Key Research and Development Program of China(No.2021YFB3701100)the National Key Research and Development Program of China(No.2016YFB0301105)+2 种基金the Applied Basic Research Program Project of Liaoning Province of China(No.2023020253-JH2/1016)the Key Research and Development Plan of Shanxi Province(No.202102050201005)the Dongguan Innovative Research Team Program(No.2020607134012).
文摘In this paper,the isothermal oxidation experiments were used to study the effect of Ag on the high-temperature oxidation behavior of Mg-6.5Gd-5.6Y-0.1Nd-0.01Ce-0.4Zr(wt%)alloy oxidized at 350℃,400℃ and 450℃ for 120 h.The results show that the oxidation weight gain of the alloy mainly occurs in the early oxidation stage(0-20 h).This reason attributes to the lack of protective oxide film and the rapid inward diffusion of oxygen through the macroscopic defects of the incomplete oxide film.When dense oxide films such as Y_(2)O_(3),Gd_(2)O_(3),and ZrO2 form,they hinder the inward transport of oxygen ions and improve the high-temperature oxidation resistance of the alloy.In addition,the role of the Ag element at three temperatures is different.The addition of Ag mainly promotes the formation of eutectic phases such as Mg3Gd,Mg24Y5,and Ag2Gd,which reduces the content of Gd and Y elements in the alloy matrix,resulting in a decrease in the diffusion rate of Gd and Y elements during the oxidation process at 350℃ and 400℃,and weakens the oxidation resistance of Ag-containing alloys.However,in the oxidation experiment at 450℃,a large amount of eutectic phase is solid dissolved into the matrix,reducing the difference in element content.At this time,it is detected that the Ag element promoted the outward diffusion of Gd and Y elements,accelerating the formation of the oxide film.The oxidation resistance of Ag-containing alloys is improved.
基金supported by the National Natural Science Foundation of China under Grant Nos.51671053 and 51801021the Fundamental Research Funds for the Central Universities(No.N2302007)the Ministry of Industry and Information Technology Project(No.MJ-2017-J-99).
文摘The presence of excess Ta in high-temperature protective coatings can compromise the integrity of the Al_(2)O_(3)scale on the surface,which has a negative impact on the oxidation behavior and reduces the service life.The effects of oxygen doping on the isothermal oxidation of three sputtered nanocrystalline coatings were investigated at 1100°C.The results indicated that oxygen doping inhibited the diffusion of Ta from the coating to the oxide scale,which was primarily attributed to the preferential oxidation of the Al in the coating.However,excess oxygen doping decreased the amount of Al available for the formation of the Al_(2)O_(3)scale on the coating,thus reducing the inhibitory effect on Ta oxidation.Moreover,doping with excess O caused spalling of the oxide scale.Therefore,the right balance in O doping is crucial for suppressing Ta oxidation while maintaining the integrity of the oxide scale.
基金Project supported by the National Natural Science Foundation of China(52271107)Natural Science Foundation of Shandong Province(ZR2021ME241)。
文摘The oxidation behavior of WE43 magnesium alloy in dry air at three temperatures(225,440 and 525℃)and the corresponding corrosion performance of samples attached to oxide film in 3.5 wt%NaCl solution was investigated.The results show that the oxide films formed at all three temperatures are a complex MgO·RE_(2)O_(3)·ZrO film with different compositions.The film formed at 225℃is flat and dense,whose components are 3.2MgO·1.8RE_(2)O_(3)·1ZrO.The oxidation ridges begin to form,and then gradually grow into nodular oxides and form a loose and porous oxide layer as the temperature increases to 525℃.The oxide films formed at all three temperatures improve the corrosion resistance of the alloy due to the MgO·RE_(2)O_(3)·ZrO,with the protective properties of oxide films following the order of 225℃>440℃>525℃,because the dense MgO·RE_(2)O_(3)·ZrO film formed at 225℃can provide better protection to the substrate than the loose oxide film formed at higher temperatures.
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China(Nos.52274372 and 52201101)the National Key R&D Program of China(No.2021YFB3702404)the Fundamental Research Funds for the Central Universities(No.FRF-TP-22-013A1).
文摘This work investigated the effect of Cr and Si on the mechanical properties and oxidation resistance of press hardened steel.Results indicated that the microstructure of the Cr-Si micro-alloyed press hardened steel consisted of lath martensite,M_(23)C_(6)carbides,and retained austenite.The retained austenite and carbides are responsible for the increase in elongation of the micro-alloyed steel.In addition,after oxidation at 930℃for 5 min,the thickness of the oxide scales on the Cr-Si micro-alloyed press hardened steel is less than 5μm,much thinner than 45.50μm-thick oxide scales on 22MnB5.The oxide scales of the Cr-Si micro-alloyed steel are composed of Fe_(2)O_(3),Fe_(3)O_(4),mixed spinel oxide(FeCr_(2)O_(4)and Fe_(2)SiO_(4)),and amorphous SiO_(2).Adding Cr and Si significantly reduces the thickness of the oxide scales and prevents the generation of the FeO phase.Due to the increase of spinel FeCr_(2)O_(4)and Fe_(2)SiO_(4)phase in the inner oxide scale and the amorphous SiO_(2)close to the substrate,the oxidation resistance of the Cr-Si micro-alloyed press hardened steel is improved.
基金Project(GC13A113)supported by the Technology Research and Development Program of Heilongjiang Provincial Science and Technology DepartmentProject(12511469)supported by Heilongjiang Provincial Science and Technology Department
文摘Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the oxidation resistance of the electrodeposited Ni-La2O3/CeO2 composites in air at 1000 °C was studied. The results indicate that, compared with the electrodeposited Ni-film, Ni-La2O3/CeO2 composites exhibit a superior oxidation resistance due to the codeposited La2O3 or CeO2 particles blocking the outward diffusion of nickel. Moreover, compared with nanoparticles, La2O3 or CeO2 microparticles have stronger effect because La2O3 or CeO2 microparticles also act as a diffusion barrier layer at the onset of oxidation.
基金financial support of the National Natural Science Foundation of China(Nos.U2141210,51975561)the Fundamental Research Funds for the Central Universities(No.31920220160)+1 种基金the Youth Innovation Promotion Association of Chinese Academy of Sciences(No.Y202084)the Key Program of the Lanzhou Institute of Chemical Physics of Chinese Academy of Sciences(No.KJZLZD-3).
文摘Chromium oxide ceramic materials are widely used in high-temperature applications requiring high wear resistance and lubricity.To further improve the friction and wear performance and high-temperature stability of chromium oxide thin films,this study attempted to dope rare earth(RE)element Y(yttrium)and deposited CrYO high-temperature self-lubricating ceramic thin films with different doping levels on the surface of IN718 alloys by using multi-arc ion plating technology.The deposited films were annealed at 1000℃for 2 h under atmospheric conditions to analyze the changes in phase composition and thickness,and the friction and wear characteristics of the CrYO films were tested using a high-temperature friction and wear tester in the temperature range of 25–600℃.The results show that the CrYO-2 film has a dense multilayer structure,and the multilayer oxide film produces interlayer sliding under frictional shear,thus providing lubrication.In particular,the friction coefficients are as low as about 0.25 in the middle and high-temperature sections(400,600℃),which provides good high-temperature tribological properties.In addition,the doping of Y elements dramatically affects the formation of the oxide layer and the distribution of voids in the film,changing the diffusion process of the elements of the base material inside the film and at the film-air interface at high temperatures.After two annealing treatments,the film thickness increased from 1.81 to 2.25μm,and the volume expansion of the films was effectively controlled compared with that of the Cr_(2)O_(3)films.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174296,U20A20279,U1532268,U1932134 and U1867215)the Key Research and Development Program of Hubei Province(Grant No.2021BAA057)+2 种基金Hubei Provincial Colleges and Universities Excellent Young and Middle-aged Science and Technology Innovation Team Project(Grant No.T201903)Wuhan City Applied Basic Frontier Project(Grant No.2019010701011382)Wuhan University of Science and Technology Graduate Innovation and Entrepreneurship Fund(Grant No.JCX2021094)and 111 Project(Grant No.2018018)。
文摘The development of alloys with high antioxidation performance is limited by the ambiguous details of the oxidation mechanism.Here,based on the structures of internal oxides detected by high-resolution transmission electron microscopy,a hybrid method combining first-principles calculation,climb image nudged elastic band method and quasi-harmonic Debye model has been implemented to explain the oxidation mechanism with an emphasis on the origin of delamination and cracking.The results showed that the delamination of oxides corresponds to the acceleration of diffusion of Cr element caused by lamellar structures.The reduction in the cracking occurrence at high temperature mainly results from the smaller bulk modulus of oxides.Furthermore,the stronger chemical bonds promoted by lamellar structures also correspond to the higher crackingresistance.
基金supported by the National Natural Science Foundations of China(Nos.51590894,51425102 and 51231001)。
文摘In this paper,Si coatings were sprayed onto C/SiC composite substrates by atmospheric plasma spraying(APS).The high-temperature oxidation behavior of the substrate and coating at temperatures of 1100 and 1300℃was also studied.The C/SiC ceramic matrix composite will be damaged seriously and even failed due to the oxidation of carbon fibers in matrix.The Si coating effectively improved the oxidation resistance of the C/SiC substrate in the high-temperature oxidation test.The effect of the thickness of the Si coatings on the oxidation resistance was investigated.The 150-μm coating is proved to enable the substrate to have the lowest oxidation weight loss and the best oxidation resistance after static oxidation for 5 h.
基金the financial support from the National Key Research and Development Program of China(No.2022YFB3708400)the National Science and Technology Major Project(J2019-VIII-0003-0165)the Space Utilization System of China Manned Space Engineering(No.KJZ-YY-WCL04).
文摘In this study,we investigated the oxidation of the Mg-11Y-1Al alloy at 500℃in an Ar-20%O2environment.Multiscale analysis showed the network-like long-period stacking ordered(LPSO)phase transformed into needle-like LPSO and polygonal Mg24Y5 phases,leading to the formation of a high-dense network of needle-like oxides at the oxidation front.These oxides grew laterally along the oxide/matrix interfaces,forming a thicker,continuous scale that effectively blocked elemental diffusion.Hence,the preferential oxidation along the needle-like LPSO is believed to accelerate the formation of a thicker and continuous oxide scale,further improving the oxidation resistance of the Mg-11Y-1Al alloy.
基金supported by the Ministry of Science and Higher Education of the Russian Federation under State Research Assignment(No.0718-2020-0034)Development Program of MISIS(No.K7-2023-009)within the Framework Strategic Academic Leadership Program"Priority-2030".
文摘The high-temperature oxidation resistance of the nickel superalloy prepared by the laser powder bed fusion(LPBF)has been significantly increased as a result of in-situ formation of a thermal barrier layer(α-Al_(2)O_(3)+CaMoO4)during oxidative annealing of surface layers modified by electric spark treatment(EST).The reactive EST of the LPBF-built items based on nickel EP741NP alloy was carried out with low-melting Al−12%Si,Al−6%Ca−0.6%Si and Al−7%Ca−1%Mn electrodes.It was found that under EST done by Al−7%Ca−1%Mn electrode an intermetallic(β-NiAl+γ'-Ni3Al)15μm-thick layer reinforced by spherical oxide(CaMe)O nanoparticles was formed.Formation of that structure increases the wear resistance of LPBF nickel superalloy by 4.5 times.Further oxidative annealing at 1000°C leads to a formation of continuous two-layered coating with an inner layer ofα-Al_(2)O_(3) and an outer layer of CaMoO4,which together act as an effective barrier preventing the diffusion of oxygen into the bulk of the superalloy.
基金financially supported by the National Natural Science Foundation of China and Shanghai Baosteel Group Company(No. U1960204)the National Natural Science Foundation of China(Nos. 51871042 and 51501034)the Fundamental Research Funds for the Central Universities (No. N2023026)。
文摘The oxidation behavior and mechanism of as-received and 30 % cold-rolled alumina-forming austenitic(AFA) steel were investigated in dry air at 700℃.The results show that the mass gain per unit area curves of as-received and 30 % cold-rolled steels subject to near-parabolic law before 100 h oxidation time.Two samples both show higher high-temperature oxidation resistance due to the formation of dense Al_(2)O_(3) oxide scale.Gradual spallation of outer scale results in the formation of continuous and dense alumina scale.Dislocations can act as short-circuit diffusion channel for the diffusion of Al from alloy matrix to surface,and also provide nucleation sites for B2-NiAl phase,which ensure the continuous formation of Al_(2)O_(3) scale.
