China’s deep coalbed methane(CBM)resources demonstrate immense potential with extensive developmental prospects.However,the coupling relationship between the negative adsorption effect and the positive desorption-pro...China’s deep coalbed methane(CBM)resources demonstrate immense potential with extensive developmental prospects.However,the coupling relationship between the negative adsorption effect and the positive desorption-promotion effect under high-temperature conditions remains unclear.In this study,a self-built high-temperature adsorption-desorption system was used to investigate the coupled effects of temperature and coal rank on methane adsorption-desorption behavior in deep CBM.The results show that elevated temperatures significantly reduce methane adsorption capacity,with high-rank coals exhibiting greater sensitivity.Conversely,high-temperature conditions significantly enhance methane desorption and diffusion behavior,accelerating initial desorption rates,enabling rapid gas release in a short period,and thus improving desorption efficiency.The desorption volume and desorption-diffusion rate exhibited an asymmetric U-shaped variation with coal rank.By coupling the positive and negative effects of temperature and defining the desorption ratio,it was found that a 10 K increase in temperature raised the desorption ratio by 3.78%-8.05%.Finally,an effective gas content prediction model is proposed,and the key regulatory role of temperature in the resource potential and gas production characteristics of deep CBM is clarified.These findings can provide theoretical guidance for the subsequent optimization of deep CBM exploration and development strategies.展开更多
The high-temperature mechanical behaviors of Multi-Layer Composite Panels(MCP)and Corrugated Sandwich Panels(CSP)of Continuous Glass Fiber-Reinforced Polypropylene(CGFRPP)are critical for their application in aerospac...The high-temperature mechanical behaviors of Multi-Layer Composite Panels(MCP)and Corrugated Sandwich Panels(CSP)of Continuous Glass Fiber-Reinforced Polypropylene(CGFRPP)are critical for their application in aerospace fields,which have been rarely mentioned in previous studies.High-temperature quasi-static tensile and compression tests on CGFRPP MCP are conducted first.The results showed that the tensile and compression strength,stiffness,and tensile modulus of MCP decreased with increasing temperature.The Gibson model was found to be more suitable for predicting the high-temperature mechanical performance of MCP after comparing the calculated results of different theoretical models with experimental data.Secondly,hightemperature planar compression tests were conducted on the CGFRPP CSP,revealing that the main failure modes were corrugated core buckling and delamination between the face panel and core material,with delamination being intensified at higher temperatures.Therefore,we proposed a strength theoretical model that considers structural buckling failure and interface delamination failure,and introduced the influence factor to evaluate the effect of interface delamination on structural strength.展开更多
The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumpti...The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumption and fast switching. However, the inherent thermal instability of perovskites limits the application of OIHPs-based resistive memories under extreme conditions, while the infiuence of thermal effects on their resistance change characteristics remains unclear. Herein, a novel 2D <100>-oriented high-temperature resistant OIHP [(BIZ-H)_(2)(PbBr_(4))]n(BIZ = benzimidazole) is prepared as an active layer material to fabricate FTO/[(BIZ-H)_(2)(PbBr_(4))]n/Ag resistive memory with excellent thermal reproducibility and stability up to 120℃. The increase in temperature leads to a decrease in the PbBr_(6) octahedral distortion in the crystal structure, an increase in hydrogen bonding between the(BIZ-H)+cation and the(PbBr_(4))_(n)^(2n-)layer, and a shortening of the spacing of the inorganic layers, which is found to result in the creation and predominance of thermally activated traps with increasing temperature. This work provides a new direction for the next generation of OIHPs-based resistive memories with high-temperature tolerance.展开更多
Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the...Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the oxidation resistance of the electrodeposited Ni-La2O3/CeO2 composites in air at 1000 °C was studied. The results indicate that, compared with the electrodeposited Ni-film, Ni-La2O3/CeO2 composites exhibit a superior oxidation resistance due to the codeposited La2O3 or CeO2 particles blocking the outward diffusion of nickel. Moreover, compared with nanoparticles, La2O3 or CeO2 microparticles have stronger effect because La2O3 or CeO2 microparticles also act as a diffusion barrier layer at the onset of oxidation.展开更多
The powder X-ray diffraction patterns of LaFell.sSil.5 compounds annealed at different high temperatures from 1323 K （5 h） to 1623 K （2 h） show that a large amount of 1：13 phase begins to form in LaFell.sSiL5 com...The powder X-ray diffraction patterns of LaFell.sSil.5 compounds annealed at different high temperatures from 1323 K （5 h） to 1623 K （2 h） show that a large amount of 1：13 phase begins to form in LaFell.sSiL5 compound annealed at 1423 K （5 h）. In the temperature range from 1423 to 1523 K, ^-Fe and LaFeSi phases rapidly decrease to form 1：13 phase. LaFeSi phase is rarely observed, and the most amount of 1：13 phase is obtained in the compound annealed at 1523 K （5 h）. With the annealing temperature increasing to 1573 and 1623 K, LaFeSi is detected again in the LaFell.sSil.s compound. According to the results of annealing at different high-temperatures, the Lal-xCexFelt.sSit.5 compounds are annealed at high temperatures of 1373 K （2 h） ＋ 1523 K （5 h）. The main phase is NaZn13-type phase, and the impurity is a small amount of et-Fe in Lal-xCexFexx.sSil.5 compounds with 0 〈 x 〈 0.35, and there is a large amount of CeaFe17 phase in Lao.sCeo.sFela.sSil.s. It indicates that the substitution of cerium atoms for La in LaFelLsSil.5 compounds has limit. At the same time, the substitution of Ce for La has large effect on magnetocaloric properties. With increasing Ce content from x = 0 to x = 0.35, the Curie temperature decreases linearly from 196 to 168 K, the magnetic entropy change increases from 16.5 to 57.3 J-kg-kK-1 in a low magnetic field change of 0-2 T, and the thermal hysteresis also increases from 3 K to 8 K.展开更多
A dual-scale hybrid HfB_(2)/Cu-Hf composite with HfB_(2) microparticles and Cu_(5) Hf nanoprecipitates was designed and prepared.The contribution of the hybrid effect to the mechanical properties and high-temperature ...A dual-scale hybrid HfB_(2)/Cu-Hf composite with HfB_(2) microparticles and Cu_(5) Hf nanoprecipitates was designed and prepared.The contribution of the hybrid effect to the mechanical properties and high-temperature performances was studied from macro and micro perspectives,respectively.The hybrid of dual-scale particles can make the strain distribution of the composite at the early deformation stage more uniform and delay the strain concentration caused by the HfB_(2) particle.The dislocation pinning of HfB_(2) particles and the coherent strengthening of Cu_(5) Hf nanoprecipitates simultaneously play a strengthening role,but the strength of the hybrid composite is not a simple superposition of two strengthening mod-els.In addition,both Cu_(5) Hf nanoprecipitates and HfB_(2) microparticles contribute to the high-temperature performance of the composite,the growth and phase transition of nanoprecipitates at high temperature will reduce their contribution to strength,while the stable HfB_(2) particles can inhibit the coarsening of matrix grains and maintain the high-density geometrically necessary dislocations(GNDs)in the matrix,which ensures more excellent high-temperature resistance of the hybrid composite.As a result,the hy-brid structure can simultaneously possess the advantages of multiple reinforcements and make up for the shortcomings of each other.Finally,a copper matrix composite with high strength,high conductivity,and excellent high-temperature performance is displayed.展开更多
The tensile strength of rocks under real-time high-temperatures is essential for enhanced geothermal system development.However,the complex occurrence and deep burial of hot dry rocks limit the quantity and quality of...The tensile strength of rocks under real-time high-temperatures is essential for enhanced geothermal system development.However,the complex occurrence and deep burial of hot dry rocks limit the quantity and quality of standard samples for mechanical testing.This paper compared the tensile strengths obtained from Brazilian splitting tests on standard samples(with a diameter of 50 mm and a thickness of 25 mm)and micro-tensile samples(with a diameter of 50 mm and a thickness of 25 mm)of two types of granites.A power-law size effect model was established between the two sets of data,validating the reliability of the testing method.Then,miniature Brazilian splitting under real-time high-temperature,combined with X-ray diffraction(XRD)revealed temperature-dependent strength variations and microstructural damage mechanisms.The results show that:(1)The comparison error between the tensile strength obtained by the fitting model and that of the measured standard samples was less than 6%.(2)In real-time high-temperature conditions,tensile strength of granite exhibited non-monotonic behavior,increasing below 300°C before decreasing,with sharp declines at 400–500°C and 600–700°C.(3)Thermal damage stems from the differences in the high-temperature behavior of minerals,including dehydration,phase transformation,and differential expansion.展开更多
We report on the temperature-dependent dc performance of A1GaN/GaN polarization doped field effect transistors （PolFETs）. The rough decrements of drain current and transeonductance with the operation temperature are...We report on the temperature-dependent dc performance of A1GaN/GaN polarization doped field effect transistors （PolFETs）. The rough decrements of drain current and transeonductance with the operation temperature are observed. Compared with the conventional HFETs, the drain current drop of the PolFET is smaller. The transeonductance drop of PolFETs at different gate biases shows different temperature dependences. From the aspect of the unique carrier behaviors of graded AlGaN/GaN heterostructure, we propose a quasi-multi-channel model to investigate the physics behind the temperature-dependent performance of AlGaN/GaN PolFETs.展开更多
The effect of high-temperature annealing on the yellow and blue luminescence of the undoped GaN is investi- gated by photoluminescenee （PL） and x-ray photoelectron spectroscopy （XPS）. It is found that the band-edg...The effect of high-temperature annealing on the yellow and blue luminescence of the undoped GaN is investi- gated by photoluminescenee （PL） and x-ray photoelectron spectroscopy （XPS）. It is found that the band-edge emission in the GaN apparently increases, and the yellow luminescence （YL） and blue luminescence （BL） bands dramatically decrease after annealing at 700℃. At the annealing temperature higher than 900℃, the YL and BL intensities show an enhancement for the nitrogen annealed GaN. This fact should be attributed to the increment of the Ga and N vacancies in the GaN decomposition. However, the integrated PL intensity of the oxygen an- nealed GaN decreases at the temperature ranging from 900℃ to 1000℃. This results from the capture of many photo-generated holes by high-density surface states. XPS characterization confirms that the high-density surface states mainly originate from the incorporation of oxygen atoms into GaN at the high annealing temperature, and even induces the 0.34eV increment of the upward band bending for the oxygen annealed GaN at 1000℃.展开更多
How to accurately probe chemically reactive fiows with essential thermodynamic nonequilibrium effects is an open issue.Via the Chapman–Enskog analysis,the local nonequilibrium particle velocity distribution function ...How to accurately probe chemically reactive fiows with essential thermodynamic nonequilibrium effects is an open issue.Via the Chapman–Enskog analysis,the local nonequilibrium particle velocity distribution function is derived from the gas kinetic theory.It is demonstrated theoretically and numerically that the distribution function depends on the physical quantities and derivatives,and is independent of the chemical reactions directly as the chemical time scale is longer than the molecular relaxation time.Based on the simulation results of the discrete Boltzmann model,the departure between equilibrium and nonequilibrium distribution functions is obtained and analyzed around the detonation wave.In addition,it has been verified for the first time that the kinetic moments calculated by summations of the discrete distribution functions are close to those calculated by integrals of their original forms.展开更多
In this study, the effects of rare earth Gd and Fe elements on the microstructure, the mechanical properties and the shape memory effect of Cu-11.9Al-3.8Ni high-temperature shape memory alloy were investigated by opti...In this study, the effects of rare earth Gd and Fe elements on the microstructure, the mechanical properties and the shape memory effect of Cu-11.9Al-3.8Ni high-temperature shape memory alloy were investigated by optical microscopy, scanning electron microscopy, X-ray diffraction and compression test. The microstructure observation results showed that both Cu-11.9Al-3.8Ni-0.2Gd and Cu-11.9Al-3.8Ni-2.0Fe-0.2Gd alloys displayed the fine grain and single- phase fll1 martensite, and their grain size was about several hundred microns, one order of the magnitude smaller than that of Cu-11.9Al-3.8Ni alloy. The compression test results proved that the mechanical properties of Cu-11.9Al-3.8Ni alloy were dramatically improved by alloying element additions due to grain refinement and solid solution strengthening, and the compressive fracture strains of Cu-11.9Al-3.8Ni-0.2Gd and Cu-ll.9Al-3.8Ni-2.0Fe-0.2Gd were 12.0% and 17.8%, respectively. When the pre-straln was 10%, the reversible strains of 5.4% and 5.9% were obtained for Cu-11.9Al-3.8Ni- 0.2Gd and Cu-ll.9Al-3.SNi-2.0Fe-0.2Gd alloys after being heated to 500 ℃ for 1 rain, and the obvious two-way shape memory effect was also observed.展开更多
Abstract We propose a simple and effective boundary model in a nonequilibrium molecular dynamics （NEMD） simulation to study the out-of-equilibrium dynamics of polymer fluids. The present boundary model can effective...Abstract We propose a simple and effective boundary model in a nonequilibrium molecular dynamics （NEMD） simulation to study the out-of-equilibrium dynamics of polymer fluids. The present boundary model can effectively weaken the depletion effect and the slip effect near the boundary, and remove the unwanted heat instantly. The validity of the boundary model is checked by investigating the flow behavior of dilute polymer solution driven by an external force. Reasonable density distributions of both polymer and solvent particles, velocity profiles of the solvent and temperature profiles of the system are obtained. Furthermore, the studied polymer chain shows a cross-streaming migration towards center of the tube, which is consistent with that predicted in previous literatures. These numerical results give powerful evidences for the validity of the present boundary model. Besides, the boundary model can also be used in other flows in addition to the Poiseuille flow.展开更多
Kinetic effects in the inertial confinement fusion ignition process are far from clear.In this work,we study the Richtmyer-Meshkov instability and reshock processes by using a two-fluid discrete Boltzmann method.The w...Kinetic effects in the inertial confinement fusion ignition process are far from clear.In this work,we study the Richtmyer-Meshkov instability and reshock processes by using a two-fluid discrete Boltzmann method.The work begins by interpreting the experiment conducted by Collins and Jacobs(2002,J.Fluid Mech.464,113-136).It shows that the shock wave causes substances in close proximity to the substance interface to deviate more significantly from their thermodynamic equilibrium state.The thermodynamic non-equilibrium(TNE)quantities exhibit complex but inspiring kinetic effects in the shock process and behind the shock front.The kinetic effects are detected by two sets of TNE quantities.The first set includes∣Δ_(2)^(*)∣,∣Δ_(3,1)^(*),∣Δ_(3)^(*)∣,and∣Δ_(4,2)^(*)∣,which correspond to the intensities of the non-organized momentum Flux(NOMF),Non-Organized Energy Flux(NOEF),the flux of NOMF and the flux of NOEF.All four TNE measures abruptly increase in the shock process.The second set of TNE quantities includes■_(NOMF),■_(NOEF)and■_(sum),which denote the entropy production rates due to NOMF,NOEF and their summation,respectively.The mixing zone is the primary contributor to■_(NOEF),while the flow field region outside of the mixing zone is the primary contributor to■_(NOMF).Additionally,each substance exhibits different behaviors in terms of entropy production rate,and the lighter fluid has a higher entropy production rate than the heavier fluid.展开更多
In order to understand the high-temperature deformation behaviour of alloy having hard surface layer,thermo-mechanically treated duplex stainless steel(DSS)is boronised for 0.75-6 h at 1223 K and subsequently deformed...In order to understand the high-temperature deformation behaviour of alloy having hard surface layer,thermo-mechanically treated duplex stainless steel(DSS)is boronised for 0.75-6 h at 1223 K and subsequently deformed under compression mode at the same temperature under strain rate condition of 1×10^(-3),2×10^(-4) and 6×10^(-5) s^(-1) until strain of 0.4.The substrate microstructure is almost isotropic with grain size after boronising with layer thickness between 1.61 and 2.74μm.X-ray diffraction results confirm the formation of boride on DSS surface.The surface hardness of DSS increases from 387 to 1000-2400 HV after boronising.Uniform boronised layer with thickness of 20-40μm is formed at DSS surface.Compression results show that the flow stress of the deformation increases with the strain rate and boronising time.For the boronised samples,the flow stress range is between 5 and 89 MPa.To determine the actual effect of the boronised layer on the flow stress,the results are also compared with those from un-boronised samples having similar microstructure.The results suggest that at a constant grain size,even with the hardest layer,the effect of hard surface layer on the flow stress almost could be negligible when the deformation rate is slow,but at faster deformation rate,even in the layer with the least hardness,the flow stress shows a significant increase.It is also observed that the hard boride surface disintegration could be avoided at a sufficiently low deformation flow stress that could be attributed to superplasticity.展开更多
Ultraviolet position-sensitive detectors(PSDs)are expected to undergo harsh environments,such as high temperatures,for a wide variety of applications in military,civilian,and aerospace.However,no report on relevant PS...Ultraviolet position-sensitive detectors(PSDs)are expected to undergo harsh environments,such as high temperatures,for a wide variety of applications in military,civilian,and aerospace.However,no report on relevant PSDs operating at high temperatures can be found up to now.Herein,we design a new 2D/3D graphitic carbon nitride(g-C_(3)N_(4))/gallium nitride(GaN)hybrid heterojunction to construct the ultraviolet high-temperature-resistant PSD.The g-C_(3)N_(4)/GaN PSD exhibits a high position sensitivity of 355 mV mm^(-1),a rise/fall response time of 1.7/2.3 ms,and a nonlinearity of 0.5%at room temperature.The ultralow formation energy of-0.917 eV atom^(-1)has been obtained via the thermodynamic phase stability calculations,which endows g-C_(3)N_(4)with robust stability against heat.By merits of the strong built-in electric field of the 2D/3D hybrid heterojunction and robust thermo-stability of g-C_(3)N_(4),the g-C_(3)N_(4)/GaN PSD delivers an excellent position sensitivity and angle detection nonlinearity of 315 mV mm^(-1)and 1.4%,respectively,with high repeatability at a high temperature up to 700 K,outperforming most of the other counterparts and even commercial silicon-based devices.This work unveils the high-temperature PSD,and pioneers a new path to constructing g-C_(3)N_(4)-based harsh-environment-tolerant optoelectronic devices.展开更多
Conventional MgO-C bricks(graphite content>14 wt.%)produce a great deal of greenhouse gas emission,while low-carbon MgO-C bricks have serious thermal shock resistance during high-temperature service.To enhance the ...Conventional MgO-C bricks(graphite content>14 wt.%)produce a great deal of greenhouse gas emission,while low-carbon MgO-C bricks have serious thermal shock resistance during high-temperature service.To enhance the high-temperature mechanical property and thermal shock resistance of low-carbon MgO-C bricks,a novel route of introducing ZrSiO_(4) powder into low-carbon MgO-C bricks was reported in such refractories with 2 wt.% flaky graphite.The results indicate that the low-carbon MgO-C brick with 0.5 wt.%ZrSiO_(4) addition has the maximum hot modulus of rupture at 1400℃ and the corresponding specimen fired in the carbon embedded atmosphere has the maximum residual strength ratio(98.6%)after three thermal shock cycles.It is found that some needle-like AlON and plate-like Al_(2)O_(3)-ZrO_(2) composites were in situ formed in the matrices after the low-carbon MgO-C bricks were coked at 1400℃,which can enhance the high-temperature mechanical property and thermal shock resistance due to the effect of fiber toughening and particle toughening.Moreover,CO_(2) emission of the newly developed low-carbon MgO-C bricks is reduced by 58.3% per ton steel after using them as the working lining of a 90 t vacuum oxygen decarburization ladle.展开更多
Nonequilibrium effect due to the imbalance in the number of the ? and ? spin electrons has been studied for the tunneling currents in the ferromagnet-insulator-superconductor (FIS) tunneling junctions within a phenome...Nonequilibrium effect due to the imbalance in the number of the ? and ? spin electrons has been studied for the tunneling currents in the ferromagnet-insulator-superconductor (FIS) tunneling junctions within a phenomenological manner. It has been stated how the nonequilibrium effect should be observed in the spin-polarized quasiparticle tunneling currents, and pointed out that the detectable nonequilibrium effect could be found in the FIS tunneling junction at 77 K using HgBa2Ca2Cu3O8+? (Hg-1223) high-Tc superconductor rather than Bi2Sr2CaCu2O8+? (Bi-2212) one.展开更多
The recently developed discrete Boltzmann method(DBM), which is based on a set of uniform linear evolution equations and has high parallel efficiency, is employed to investigate the dynamic nonequilibrium process of K...The recently developed discrete Boltzmann method(DBM), which is based on a set of uniform linear evolution equations and has high parallel efficiency, is employed to investigate the dynamic nonequilibrium process of Kelvin-Helmholtz instability(KHI). It is found that, the relaxation time always strengthens the global nonequilibrium(GNE), entropy of mixing, and free enthalpy of mixing. Specifically, as a combined effect of physical gradients and nonequilibrium area, the GNE intensity first increases but decreases during the whole life-cycle of KHI. The growth rate of entropy of mixing shows firstly reducing, then increasing, and finally decreasing trends during the KHI process. The trend of the free enthalpy of mixing is opposite to that of the entropy of mixing. Detailed explanations are:(i) Initially,binary diffusion smooths quickly the sharp gradient in the mole fraction, which results in a steeply decreasing mixing rate.(ii) Afterwards, the mixing process is significantly promoted by the increasing length of material interface in the evolution of the KHI.(iii) As physical gradients are smoothed due to the binary diffusion and dissipation, the mixing rate reduces and approaches zero in the final stage. Moreover, with the increasing Atwood number, the global strength of viscous stresses on the heavy(light) medium reduces(increases), because the heavy(light) medium has a relatively small(large) velocity change. Furthermore, for a smaller Atwood number, the peaks of nonequilibrium manifestations emerge earlier, the entropy of mixing and free enthalpy of mixing change faster, because the KHI initiates a higher growth rate.展开更多
The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(...The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit(BBU)provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease fordifferent Mg/PIFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream(rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used,The results show that the reignition delay time,ta,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.展开更多
To predict aeroheating performance of hypersonic vehicles accurately in thermochemical nonequilibrium flows accompanied by rarefaction effect,a Nonlinear Coupled Constitutive Relations(NCCR)model coupled with Gupta’s...To predict aeroheating performance of hypersonic vehicles accurately in thermochemical nonequilibrium flows accompanied by rarefaction effect,a Nonlinear Coupled Constitutive Relations(NCCR)model coupled with Gupta’s chemical models and Park’s two-temperature model is firstly proposed in this paper.Three typical cases are intensively investigated for further validation,including hypersonic flows over a two-dimensional cylinder,a RAM-C II flight vehicle and a type HTV-2 flight vehicle.The results predicted by NCCR solution,such as heat flux coefficient and electron number densities,are in better agreement with those of direct simulation Monte Carlo or flight data than Navier-Stokes equations,especially in the extremely nonequilibrium regions,which indicates the potential of the newly-developed solution to capture both thermochemical and rarefied nonequilibrium effects.The comparisons between the present solver and NCCR model without a two-temperature model are also conducted to demonstrate the significance of vibrational energy source term in the accurate simulation of high-Mach flows.展开更多
基金supported by the National Natural Science Fund of China(No.42272195)the National Natural Science Fund of China(No.42130802)+2 种基金the Fundamental Research Funds for the Central Universities(No.2025ZDPY10)the China National Petroleum Co.,Ltd..Research applied science and technology special(No.2023ZZ18)the PetroChina Changqing oilfield science and technology major project(No.2023DZZ01).
文摘China’s deep coalbed methane(CBM)resources demonstrate immense potential with extensive developmental prospects.However,the coupling relationship between the negative adsorption effect and the positive desorption-promotion effect under high-temperature conditions remains unclear.In this study,a self-built high-temperature adsorption-desorption system was used to investigate the coupled effects of temperature and coal rank on methane adsorption-desorption behavior in deep CBM.The results show that elevated temperatures significantly reduce methane adsorption capacity,with high-rank coals exhibiting greater sensitivity.Conversely,high-temperature conditions significantly enhance methane desorption and diffusion behavior,accelerating initial desorption rates,enabling rapid gas release in a short period,and thus improving desorption efficiency.The desorption volume and desorption-diffusion rate exhibited an asymmetric U-shaped variation with coal rank.By coupling the positive and negative effects of temperature and defining the desorption ratio,it was found that a 10 K increase in temperature raised the desorption ratio by 3.78%-8.05%.Finally,an effective gas content prediction model is proposed,and the key regulatory role of temperature in the resource potential and gas production characteristics of deep CBM is clarified.These findings can provide theoretical guidance for the subsequent optimization of deep CBM exploration and development strategies.
基金co-supported by the National Natural Science Foundation of China(Nos.12372127,12202085,12302464)the Fundamental Research Funds for the Central Universities,China(No.2024CDJXY009)+1 种基金the Chongqing Outstanding Youth Fund,China(No.CSTB2024NSCQ-JQX0028)the Chongqing Natural Science Foundation,China(Nos.cstc2021ycjh-bgzxm0117,CSTB2022NSCQ-MSX0608)。
文摘The high-temperature mechanical behaviors of Multi-Layer Composite Panels(MCP)and Corrugated Sandwich Panels(CSP)of Continuous Glass Fiber-Reinforced Polypropylene(CGFRPP)are critical for their application in aerospace fields,which have been rarely mentioned in previous studies.High-temperature quasi-static tensile and compression tests on CGFRPP MCP are conducted first.The results showed that the tensile and compression strength,stiffness,and tensile modulus of MCP decreased with increasing temperature.The Gibson model was found to be more suitable for predicting the high-temperature mechanical performance of MCP after comparing the calculated results of different theoretical models with experimental data.Secondly,hightemperature planar compression tests were conducted on the CGFRPP CSP,revealing that the main failure modes were corrugated core buckling and delamination between the face panel and core material,with delamination being intensified at higher temperatures.Therefore,we proposed a strength theoretical model that considers structural buckling failure and interface delamination failure,and introduced the influence factor to evaluate the effect of interface delamination on structural strength.
基金financially supported by the Ph.D. start-up funds of Jiangxi Science and Technology Normal University (Nos. 2023BSQD11, 2023BSQD13)Jiangxi Province Key Laboratory of Organic Functional Molecules (No. 2024SSY05141)。
文摘The exploitation of organic-inorganic hybrid perovskites(OIHPs) as active layer materials for typical sandwich-structured resistive memories has attracted widespread interest due to the property of low power consumption and fast switching. However, the inherent thermal instability of perovskites limits the application of OIHPs-based resistive memories under extreme conditions, while the infiuence of thermal effects on their resistance change characteristics remains unclear. Herein, a novel 2D <100>-oriented high-temperature resistant OIHP [(BIZ-H)_(2)(PbBr_(4))]n(BIZ = benzimidazole) is prepared as an active layer material to fabricate FTO/[(BIZ-H)_(2)(PbBr_(4))]n/Ag resistive memory with excellent thermal reproducibility and stability up to 120℃. The increase in temperature leads to a decrease in the PbBr_(6) octahedral distortion in the crystal structure, an increase in hydrogen bonding between the(BIZ-H)+cation and the(PbBr_(4))_(n)^(2n-)layer, and a shortening of the spacing of the inorganic layers, which is found to result in the creation and predominance of thermally activated traps with increasing temperature. This work provides a new direction for the next generation of OIHPs-based resistive memories with high-temperature tolerance.
基金Project(GC13A113)supported by the Technology Research and Development Program of Heilongjiang Provincial Science and Technology DepartmentProject(12511469)supported by Heilongjiang Provincial Science and Technology Department
文摘Ni-La2O3/CeO2 composite films were prepared by electrodeposition from a nickel sulfate bath containing certain content of micrometer and nanometer La2O3/CeO2 particles. The effect of La2O3 or CeO2 particle size on the oxidation resistance of the electrodeposited Ni-La2O3/CeO2 composites in air at 1000 °C was studied. The results indicate that, compared with the electrodeposited Ni-film, Ni-La2O3/CeO2 composites exhibit a superior oxidation resistance due to the codeposited La2O3 or CeO2 particles blocking the outward diffusion of nickel. Moreover, compared with nanoparticles, La2O3 or CeO2 microparticles have stronger effect because La2O3 or CeO2 microparticles also act as a diffusion barrier layer at the onset of oxidation.
基金supported by the Key Project of National Natural Science Foundation of China (No. 50731007)the National High-Tech Research and Development Program of China (No. 2007AA03Z440)
文摘The powder X-ray diffraction patterns of LaFell.sSil.5 compounds annealed at different high temperatures from 1323 K （5 h） to 1623 K （2 h） show that a large amount of 1：13 phase begins to form in LaFell.sSiL5 compound annealed at 1423 K （5 h）. In the temperature range from 1423 to 1523 K, ^-Fe and LaFeSi phases rapidly decrease to form 1：13 phase. LaFeSi phase is rarely observed, and the most amount of 1：13 phase is obtained in the compound annealed at 1523 K （5 h）. With the annealing temperature increasing to 1573 and 1623 K, LaFeSi is detected again in the LaFell.sSil.s compound. According to the results of annealing at different high-temperatures, the Lal-xCexFelt.sSit.5 compounds are annealed at high temperatures of 1373 K （2 h） ＋ 1523 K （5 h）. The main phase is NaZn13-type phase, and the impurity is a small amount of et-Fe in Lal-xCexFexx.sSil.5 compounds with 0 〈 x 〈 0.35, and there is a large amount of CeaFe17 phase in Lao.sCeo.sFela.sSil.s. It indicates that the substitution of cerium atoms for La in LaFelLsSil.5 compounds has limit. At the same time, the substitution of Ce for La has large effect on magnetocaloric properties. With increasing Ce content from x = 0 to x = 0.35, the Curie temperature decreases linearly from 196 to 168 K, the magnetic entropy change increases from 16.5 to 57.3 J-kg-kK-1 in a low magnetic field change of 0-2 T, and the thermal hysteresis also increases from 3 K to 8 K.
基金supported by the National Natural Science Foundation of China(Nos.52127802,52271137,and 51834009).
文摘A dual-scale hybrid HfB_(2)/Cu-Hf composite with HfB_(2) microparticles and Cu_(5) Hf nanoprecipitates was designed and prepared.The contribution of the hybrid effect to the mechanical properties and high-temperature performances was studied from macro and micro perspectives,respectively.The hybrid of dual-scale particles can make the strain distribution of the composite at the early deformation stage more uniform and delay the strain concentration caused by the HfB_(2) particle.The dislocation pinning of HfB_(2) particles and the coherent strengthening of Cu_(5) Hf nanoprecipitates simultaneously play a strengthening role,but the strength of the hybrid composite is not a simple superposition of two strengthening mod-els.In addition,both Cu_(5) Hf nanoprecipitates and HfB_(2) microparticles contribute to the high-temperature performance of the composite,the growth and phase transition of nanoprecipitates at high temperature will reduce their contribution to strength,while the stable HfB_(2) particles can inhibit the coarsening of matrix grains and maintain the high-density geometrically necessary dislocations(GNDs)in the matrix,which ensures more excellent high-temperature resistance of the hybrid composite.As a result,the hy-brid structure can simultaneously possess the advantages of multiple reinforcements and make up for the shortcomings of each other.Finally,a copper matrix composite with high strength,high conductivity,and excellent high-temperature performance is displayed.
基金supported by the National Natural Science Foundation of China(Nos.52174175 and 52274078)the Program for the Scientific and Technological Innovation Team in Universities of Henan Province(No.23IRTSTHN005)。
文摘The tensile strength of rocks under real-time high-temperatures is essential for enhanced geothermal system development.However,the complex occurrence and deep burial of hot dry rocks limit the quantity and quality of standard samples for mechanical testing.This paper compared the tensile strengths obtained from Brazilian splitting tests on standard samples(with a diameter of 50 mm and a thickness of 25 mm)and micro-tensile samples(with a diameter of 50 mm and a thickness of 25 mm)of two types of granites.A power-law size effect model was established between the two sets of data,validating the reliability of the testing method.Then,miniature Brazilian splitting under real-time high-temperature,combined with X-ray diffraction(XRD)revealed temperature-dependent strength variations and microstructural damage mechanisms.The results show that:(1)The comparison error between the tensile strength obtained by the fitting model and that of the measured standard samples was less than 6%.(2)In real-time high-temperature conditions,tensile strength of granite exhibited non-monotonic behavior,increasing below 300°C before decreasing,with sharp declines at 400–500°C and 600–700°C.(3)Thermal damage stems from the differences in the high-temperature behavior of minerals,including dehydration,phase transformation,and differential expansion.
文摘We report on the temperature-dependent dc performance of A1GaN/GaN polarization doped field effect transistors （PolFETs）. The rough decrements of drain current and transeonductance with the operation temperature are observed. Compared with the conventional HFETs, the drain current drop of the PolFET is smaller. The transeonductance drop of PolFETs at different gate biases shows different temperature dependences. From the aspect of the unique carrier behaviors of graded AlGaN/GaN heterostructure, we propose a quasi-multi-channel model to investigate the physics behind the temperature-dependent performance of AlGaN/GaN PolFETs.
基金Supported by the National Basic Research Program of China under Grant Nos 2011CB301900,2012CB619200 and 2012CB619304the High-Technology Research and Development Program of China under Grant Nos 2014AA032605 and 2015AA033305+4 种基金the National Natural Science Foundation of China under Grant Nos 60990311,61274003,61422401,51461135002,60936004,61176063 and 61334009the Natural Science Foundation of Jiangsu Province under Grant Nos BK2011010 and BK20141320the Scientific Innovation Research of College Graduate in Jiangsu Province under Grant No CXLX12.0049a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Solid State Lighting and Energy-saving Electronics Collaborative Innovation Center
文摘The effect of high-temperature annealing on the yellow and blue luminescence of the undoped GaN is investi- gated by photoluminescenee （PL） and x-ray photoelectron spectroscopy （XPS）. It is found that the band-edge emission in the GaN apparently increases, and the yellow luminescence （YL） and blue luminescence （BL） bands dramatically decrease after annealing at 700℃. At the annealing temperature higher than 900℃, the YL and BL intensities show an enhancement for the nitrogen annealed GaN. This fact should be attributed to the increment of the Ga and N vacancies in the GaN decomposition. However, the integrated PL intensity of the oxygen an- nealed GaN decreases at the temperature ranging from 900℃ to 1000℃. This results from the capture of many photo-generated holes by high-density surface states. XPS characterization confirms that the high-density surface states mainly originate from the incorporation of oxygen atoms into GaN at the high annealing temperature, and even induces the 0.34eV increment of the upward band bending for the oxygen annealed GaN at 1000℃.
基金supported by the National Natural Science Foundation of China(NSFC)under Grant Nos.51806116 and 11875001。
文摘How to accurately probe chemically reactive fiows with essential thermodynamic nonequilibrium effects is an open issue.Via the Chapman–Enskog analysis,the local nonequilibrium particle velocity distribution function is derived from the gas kinetic theory.It is demonstrated theoretically and numerically that the distribution function depends on the physical quantities and derivatives,and is independent of the chemical reactions directly as the chemical time scale is longer than the molecular relaxation time.Based on the simulation results of the discrete Boltzmann model,the departure between equilibrium and nonequilibrium distribution functions is obtained and analyzed around the detonation wave.In addition,it has been verified for the first time that the kinetic moments calculated by summations of the discrete distribution functions are close to those calculated by integrals of their original forms.
基金supported by the China Postdoctoral Science Foundation Funded Project (No. 2015M571269)
文摘In this study, the effects of rare earth Gd and Fe elements on the microstructure, the mechanical properties and the shape memory effect of Cu-11.9Al-3.8Ni high-temperature shape memory alloy were investigated by optical microscopy, scanning electron microscopy, X-ray diffraction and compression test. The microstructure observation results showed that both Cu-11.9Al-3.8Ni-0.2Gd and Cu-11.9Al-3.8Ni-2.0Fe-0.2Gd alloys displayed the fine grain and single- phase fll1 martensite, and their grain size was about several hundred microns, one order of the magnitude smaller than that of Cu-11.9Al-3.8Ni alloy. The compression test results proved that the mechanical properties of Cu-11.9Al-3.8Ni alloy were dramatically improved by alloying element additions due to grain refinement and solid solution strengthening, and the compressive fracture strains of Cu-11.9Al-3.8Ni-0.2Gd and Cu-ll.9Al-3.8Ni-2.0Fe-0.2Gd were 12.0% and 17.8%, respectively. When the pre-straln was 10%, the reversible strains of 5.4% and 5.9% were obtained for Cu-11.9Al-3.8Ni- 0.2Gd and Cu-ll.9Al-3.SNi-2.0Fe-0.2Gd alloys after being heated to 500 ℃ for 1 rain, and the obvious two-way shape memory effect was also observed.
基金financially supported by the National Basic Research Program of China(973 Program,2012CB821500)supported by the National Natural Science Foundation of China(Nos.21222407,21104082 and 21474111)
文摘Abstract We propose a simple and effective boundary model in a nonequilibrium molecular dynamics （NEMD） simulation to study the out-of-equilibrium dynamics of polymer fluids. The present boundary model can effectively weaken the depletion effect and the slip effect near the boundary, and remove the unwanted heat instantly. The validity of the boundary model is checked by investigating the flow behavior of dilute polymer solution driven by an external force. Reasonable density distributions of both polymer and solvent particles, velocity profiles of the solvent and temperature profiles of the system are obtained. Furthermore, the studied polymer chain shows a cross-streaming migration towards center of the tube, which is consistent with that predicted in previous literatures. These numerical results give powerful evidences for the validity of the present boundary model. Besides, the boundary model can also be used in other flows in addition to the Poiseuille flow.
基金supported by the National Natural Science Foundation of China(under Grant Nos.12172061,11875001,11575033,and 11975053)the opening project of the State Key Laboratory of Explosion Science and Technology(Beijing Institute of Technology)(under Grant No.KFJJ23-02M)+1 种基金Foundation of National Key Laboratory of Shock Wave and Detonation Physicsthe Foundation of National Key Laboratory of Computational Physics
文摘Kinetic effects in the inertial confinement fusion ignition process are far from clear.In this work,we study the Richtmyer-Meshkov instability and reshock processes by using a two-fluid discrete Boltzmann method.The work begins by interpreting the experiment conducted by Collins and Jacobs(2002,J.Fluid Mech.464,113-136).It shows that the shock wave causes substances in close proximity to the substance interface to deviate more significantly from their thermodynamic equilibrium state.The thermodynamic non-equilibrium(TNE)quantities exhibit complex but inspiring kinetic effects in the shock process and behind the shock front.The kinetic effects are detected by two sets of TNE quantities.The first set includes∣Δ_(2)^(*)∣,∣Δ_(3,1)^(*),∣Δ_(3)^(*)∣,and∣Δ_(4,2)^(*)∣,which correspond to the intensities of the non-organized momentum Flux(NOMF),Non-Organized Energy Flux(NOEF),the flux of NOMF and the flux of NOEF.All four TNE measures abruptly increase in the shock process.The second set of TNE quantities includes■_(NOMF),■_(NOEF)and■_(sum),which denote the entropy production rates due to NOMF,NOEF and their summation,respectively.The mixing zone is the primary contributor to■_(NOEF),while the flow field region outside of the mixing zone is the primary contributor to■_(NOMF).Additionally,each substance exhibits different behaviors in terms of entropy production rate,and the lighter fluid has a higher entropy production rate than the heavier fluid.
基金financed by Postgraduate Research Grant(PPP)(Project No.PG019-2014B)from University of MalayaMalaysia and Akaun Amanah Industri Bekalan Elektrik(Project No.GAO 12-2019).
文摘In order to understand the high-temperature deformation behaviour of alloy having hard surface layer,thermo-mechanically treated duplex stainless steel(DSS)is boronised for 0.75-6 h at 1223 K and subsequently deformed under compression mode at the same temperature under strain rate condition of 1×10^(-3),2×10^(-4) and 6×10^(-5) s^(-1) until strain of 0.4.The substrate microstructure is almost isotropic with grain size after boronising with layer thickness between 1.61 and 2.74μm.X-ray diffraction results confirm the formation of boride on DSS surface.The surface hardness of DSS increases from 387 to 1000-2400 HV after boronising.Uniform boronised layer with thickness of 20-40μm is formed at DSS surface.Compression results show that the flow stress of the deformation increases with the strain rate and boronising time.For the boronised samples,the flow stress range is between 5 and 89 MPa.To determine the actual effect of the boronised layer on the flow stress,the results are also compared with those from un-boronised samples having similar microstructure.The results suggest that at a constant grain size,even with the hardest layer,the effect of hard surface layer on the flow stress almost could be negligible when the deformation rate is slow,but at faster deformation rate,even in the layer with the least hardness,the flow stress shows a significant increase.It is also observed that the hard boride surface disintegration could be avoided at a sufficiently low deformation flow stress that could be attributed to superplasticity.
基金financially supported by the National Natural Science Foundation of China(No.61804136,U1804155,11974317,62027816,12074348,and U2004168)Henan Science Fund for Distinguished Young Scholars(No.212300410020)+2 种基金Natural Science Foundation of Henan Province(No.212300410020 and 212300410078)Key Project of Henan Higher Education(No.21A140001)the Zhengzhou University Physics Discipline Improvement Program and China Postdoctoral Science Foundation(No.2018M630829 and 2019 T120630)
文摘Ultraviolet position-sensitive detectors(PSDs)are expected to undergo harsh environments,such as high temperatures,for a wide variety of applications in military,civilian,and aerospace.However,no report on relevant PSDs operating at high temperatures can be found up to now.Herein,we design a new 2D/3D graphitic carbon nitride(g-C_(3)N_(4))/gallium nitride(GaN)hybrid heterojunction to construct the ultraviolet high-temperature-resistant PSD.The g-C_(3)N_(4)/GaN PSD exhibits a high position sensitivity of 355 mV mm^(-1),a rise/fall response time of 1.7/2.3 ms,and a nonlinearity of 0.5%at room temperature.The ultralow formation energy of-0.917 eV atom^(-1)has been obtained via the thermodynamic phase stability calculations,which endows g-C_(3)N_(4)with robust stability against heat.By merits of the strong built-in electric field of the 2D/3D hybrid heterojunction and robust thermo-stability of g-C_(3)N_(4),the g-C_(3)N_(4)/GaN PSD delivers an excellent position sensitivity and angle detection nonlinearity of 315 mV mm^(-1)and 1.4%,respectively,with high repeatability at a high temperature up to 700 K,outperforming most of the other counterparts and even commercial silicon-based devices.This work unveils the high-temperature PSD,and pioneers a new path to constructing g-C_(3)N_(4)-based harsh-environment-tolerant optoelectronic devices.
基金Enterprise Research and Development Project of Beijing Lirr High-Temperature Materials Co.,Ltd.(2020-02)Key Scientific Research Project for Universities and Colleges in Henan Province(19A430028)+1 种基金the Excellent Youth Research Project of Anhui Province(2022AH030135)the PhD Research Funding of Suzhou University(2021BSK041).
文摘Conventional MgO-C bricks(graphite content>14 wt.%)produce a great deal of greenhouse gas emission,while low-carbon MgO-C bricks have serious thermal shock resistance during high-temperature service.To enhance the high-temperature mechanical property and thermal shock resistance of low-carbon MgO-C bricks,a novel route of introducing ZrSiO_(4) powder into low-carbon MgO-C bricks was reported in such refractories with 2 wt.% flaky graphite.The results indicate that the low-carbon MgO-C brick with 0.5 wt.%ZrSiO_(4) addition has the maximum hot modulus of rupture at 1400℃ and the corresponding specimen fired in the carbon embedded atmosphere has the maximum residual strength ratio(98.6%)after three thermal shock cycles.It is found that some needle-like AlON and plate-like Al_(2)O_(3)-ZrO_(2) composites were in situ formed in the matrices after the low-carbon MgO-C bricks were coked at 1400℃,which can enhance the high-temperature mechanical property and thermal shock resistance due to the effect of fiber toughening and particle toughening.Moreover,CO_(2) emission of the newly developed low-carbon MgO-C bricks is reduced by 58.3% per ton steel after using them as the working lining of a 90 t vacuum oxygen decarburization ladle.
文摘Nonequilibrium effect due to the imbalance in the number of the ? and ? spin electrons has been studied for the tunneling currents in the ferromagnet-insulator-superconductor (FIS) tunneling junctions within a phenomenological manner. It has been stated how the nonequilibrium effect should be observed in the spin-polarized quasiparticle tunneling currents, and pointed out that the detectable nonequilibrium effect could be found in the FIS tunneling junction at 77 K using HgBa2Ca2Cu3O8+? (Hg-1223) high-Tc superconductor rather than Bi2Sr2CaCu2O8+? (Bi-2212) one.
基金Supported by the Natural Science Foundation of China under Grant Nos.91441120,51806116,11875001,and 11602162the China Postdoctoral Science Foundation under Grant No.2017M620757+2 种基金the Center for Combustion Energy at Tsinghua Universitythe Natural Science Foundation of Hebei Province under Grant Nos.A2017409014,ZD2017001,and A201500111the UK Engineering and Physical Sciences Research Council under Project UK Consortium on Mesoscale Engineering Sciences(UKCOMES)under Grant Nos.EP/L00030X/1 and EP/R029598/1
文摘The recently developed discrete Boltzmann method(DBM), which is based on a set of uniform linear evolution equations and has high parallel efficiency, is employed to investigate the dynamic nonequilibrium process of Kelvin-Helmholtz instability(KHI). It is found that, the relaxation time always strengthens the global nonequilibrium(GNE), entropy of mixing, and free enthalpy of mixing. Specifically, as a combined effect of physical gradients and nonequilibrium area, the GNE intensity first increases but decreases during the whole life-cycle of KHI. The growth rate of entropy of mixing shows firstly reducing, then increasing, and finally decreasing trends during the KHI process. The trend of the free enthalpy of mixing is opposite to that of the entropy of mixing. Detailed explanations are:(i) Initially,binary diffusion smooths quickly the sharp gradient in the mole fraction, which results in a steeply decreasing mixing rate.(ii) Afterwards, the mixing process is significantly promoted by the increasing length of material interface in the evolution of the KHI.(iii) As physical gradients are smoothed due to the binary diffusion and dissipation, the mixing rate reduces and approaches zero in the final stage. Moreover, with the increasing Atwood number, the global strength of viscous stresses on the heavy(light) medium reduces(increases), because the heavy(light) medium has a relatively small(large) velocity change. Furthermore, for a smaller Atwood number, the peaks of nonequilibrium manifestations emerge earlier, the entropy of mixing and free enthalpy of mixing change faster, because the KHI initiates a higher growth rate.
基金This work was supported by the Fundamental Research Funds for the Central Universities(No.30918011324).
文摘The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit(BBU)provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease fordifferent Mg/PIFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream(rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used,The results show that the reignition delay time,ta,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.
基金financially co-supported by the National Natural Science Foundation of China(Nos.12002306,U20B2007,11572284 and 6162790014)National Numerical Wind Tunnel Project,China(No.NNW2019ZT3-A08)。
文摘To predict aeroheating performance of hypersonic vehicles accurately in thermochemical nonequilibrium flows accompanied by rarefaction effect,a Nonlinear Coupled Constitutive Relations(NCCR)model coupled with Gupta’s chemical models and Park’s two-temperature model is firstly proposed in this paper.Three typical cases are intensively investigated for further validation,including hypersonic flows over a two-dimensional cylinder,a RAM-C II flight vehicle and a type HTV-2 flight vehicle.The results predicted by NCCR solution,such as heat flux coefficient and electron number densities,are in better agreement with those of direct simulation Monte Carlo or flight data than Navier-Stokes equations,especially in the extremely nonequilibrium regions,which indicates the potential of the newly-developed solution to capture both thermochemical and rarefied nonequilibrium effects.The comparisons between the present solver and NCCR model without a two-temperature model are also conducted to demonstrate the significance of vibrational energy source term in the accurate simulation of high-Mach flows.
