To solve the problem of difficult utilization of steel slag,the liquid steel slag was modified and the air-quenching granulation process was carried out to make steel slag into a value-added end product:air-quenching ...To solve the problem of difficult utilization of steel slag,the liquid steel slag was modified and the air-quenching granulation process was carried out to make steel slag into a value-added end product:air-quenching granulated steel slag.The granulated slag was tested to analyze the variation rule of slag properties under different modification conditions.Based on the phase diagram of CaO–Si_(2)O–FeO–MgO–Al2O3 slag system,the feasibility of blast furnace(BF)slag as modifier was determined.When the addition of BF slag was increased from 0%to 35%,following results were obtained.The slag fluidity was improved,and the air-quenching temperature range was expanded.Then,the yield of air-quenched steel slag increased,while the granulation rate,the degree of sphericity,the compactness were decreased.Furthermore,the air-quenching granulation process could substantially improve the stability and the amorphous content of steel slag.The maximum removal rate of free CaO was above 80%and the amorphous content was up to 95%.Taking the factors of yield and properties of granulated steel slag into full consideration,the optimum proportion of BF slag is around 15%.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrog...As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.展开更多
Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materi...Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.展开更多
Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellen...Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.展开更多
Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immun...Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immune tolerance of cancer cells.The classical theory holds that prostate apoptosis response-4(PAR-4)is a tumor suppressor protein.However,our recent research has found that PAR-4 has a biological function of promoting cancer in hepatocellular carcinoma(HCC),and our analysis shows that PAR-4 can be modified of lactic acid.These research evidences suggest that PAR-4 lactylation modification may drive immune tolerance in HCC.Therefore,inhibiting PAR-4 lactylation modification is very likely to increase the sensitivity of HCC to immunotherapy.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pell...Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.展开更多
The implementation of multifunctional application scenarios for mobile terminal devices has increased the energy density requirements of batteries.Increasing the charging voltage can rapidly increase the specific capa...The implementation of multifunctional application scenarios for mobile terminal devices has increased the energy density requirements of batteries.Increasing the charging voltage can rapidly increase the specific capacity of layered transition metal oxides;however,it also exacerbates the release of lattice oxygen and the contraction of the unit cell.Ternary materials are designed in a secondary particle state to meet the requirements of power battery applications.Therefore,to create ternary materials that can operate under ultrahigh voltages,attention should be given to both surface modification and particle integrity maintenance.By utilizing elemental selenium(Se)with a low melting point,easy sublimation,and multiple variable valence states,deep grain boundary modification was implemented inside the particles.The performance of the cathode material was evaluated through pouch cells,and the improvement mechanism was explored through molecular dynamics simulation calculations.Under the protection of a three-dimensional Se-rich modified layer,LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2)achieved stable operation at ultrahigh voltages(4.6 V vs.Li/Li^(+));a sacrificial protection mechanism based on the chronic decomposition of the Se-rich layer was proposed to explain the efficacy of Se modification in stabilizing ternary materials.This deep grain boundary modification based on elemental Se provides a new solution for the ultrahigh-voltage operation of transition metal oxides and provides a scientific basis and technical support for solving the interface contact problem of all-solid-state batteries.展开更多
Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge reco...Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge recombination,ion migration,and iodine oxidation.To address this,we propose a novel all-in-one modification strategy employing ammonia borane(BNH6)as a multifunctional complex.By incorporating BNH6 at both buried and upper interfaces simultaneously,we achieve dualinterfacial defect passivation and iodide oxidation suppression through three key mechanisms:(1)hydrolysis-induced interaction with SnO_(2),(2)coordination with Pb^(2+),and(3)inhibition of I−oxidation.This approach significantly enhances device performance,yielding a champion power conversion efficiency(PCE)of 26.43%(certified 25.98%).Furthermore,the unencapsulated device demonstrates prominent enhanced operation stability,maintaining 90%of its initial PCE after 500 h under continuous illumination.Notably,our strategy eliminates the need for separate interface treatments,streamlining fabrication and offering a scalable route toward high-performance perovskite photovoltaics.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved cerami...In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative conti...The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.展开更多
In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ...In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.展开更多
MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO...MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO_(x)-CeO_(2)catalyst that achieves enhanced NO conversion rate and stability under harsh conditions.The catalyst was synthesized by decorating MnOx crystals with amorphous CeO_(2),followed by loading hydrophobic silica on the external surfaces.The hydrophobic silica allowed the adsorption of NH_(3)and NO and diffusion of H,suppressed the adsorption of H_(2)O,and prevented SO_(2)interaction with the Mn active sites,achieving selective molecular discrimination at the catalyst surface.At 120℃,under H_(2)O and SO_(2)exposure,the optimal hydrophobic catalyst maintains 82%NO conversion rate compared with 69%for the unmodified catalyst.The average adsorption energies of NH_(3),H_(2)O,and SO_(2)decreased by 0.05,0.43,and 0.52 eV,respectively.The NO reduction pathway follows the Eley-Rideal mechanism,NH_(3)^(*)+*→NH_(2)^(*)+H^(*)followed by NH_(2)^(*)+NO^(*)→N_(2)^(*)+H_(2)O^(*),with NH_(3)dehydrogenation being the rate determining step.Hydrophobic modification increased the activation energy for H atom transfer,leading to a minor decrease in the NO conversion rate at 120℃.This work demonstrates a viable strategy for developing robust NH_(3)-S CR catalysts capable of efficient operation in water-and sulfur-rich environments.展开更多
We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by&quo...We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.展开更多
The neuroinflammatory response mediated by microglial activation plays an important role in the secondary nerve injury of traumatic brain injury.The post-transcriptional modification of N^(6)-methyladenosine is ubiqui...The neuroinflammatory response mediated by microglial activation plays an important role in the secondary nerve injury of traumatic brain injury.The post-transcriptional modification of N^(6)-methyladenosine is ubiquitous in the immune response of the central nervous system.The fat mass and obesity-related protein catalyzes the demethylation of N^(6)-methyladenosine modifications on mRNA and is widely expressed in various tissues,participating in the regulation of multiple diseases’biological processes.However,the role of fat mass and obesity in microglial activation and the subsequent neuroinflammatory response after traumatic brain injury is unclear.In this study,we found that the expression of fat mass and obesity was significantly down-regulated in both lipopolysaccharide-treated BV2 cells and a traumatic brain injury mouse model.After fat mass and obesity interference,BV2 cells exhibited a pro-inflammatory phenotype as shown by the increased proportion of CD11b^(+)/CD86^(+)cells and the secretion of pro-inflammatory cytokines.Fat mass and obesity-mediated N^(6)-methyladenosine demethylation accelerated the degradation of ADAM17 mRNA,while silencing of fat mass and obesity enhanced the stability of ADAM17 mRNA.Therefore,down-regulation of fat mass and obesity expression leads to the abnormally high expression of ADAM17 in microglia.These results indicate that the activation of microglia and neuroinflammatory response regulated by fat mass and obesity-related N^(6)-methyladenosine modification plays an important role in the pro-inflammatory process of secondary injury following traumatic brain injury.展开更多
Research into lactylation modifications across various target organs in both health and disease has gained significant attention.Many essential life processes and the onset of diseases are not only related to protein ...Research into lactylation modifications across various target organs in both health and disease has gained significant attention.Many essential life processes and the onset of diseases are not only related to protein abundance but are also primarily regulated by various post-translational protein modifications.Lactate,once considered merely a byproduct of anaerobic metabolism,has emerged as a crucial energy substrate and signaling molecule involved in both physiological and pathological processes within the nervous system.Furthermore,recent studies have emphasized the significant role of lactate in numerous neurological diseases,including Alzheimer's disease,Parkinson's disease,acute cerebral ischemic stroke,multiple sclerosis,Huntington's disease,and myasthenia gravis.The purpose of this review is to synthesize the current research on lactate and lactylation modifications in neurological diseases,aiming to clarify their mechanisms of action and identify potential therapeutic targets.As such,this work provides an overview of the metabolic regulatory roles of lactate in various disorders,emphasizing its involvement in the regulation of brain function.Additionally,the specific mechanisms of brain lactate metabolism are discussed,suggesting the unique roles of lactate in modulating brain function.As a critical aspect of lactate function,lactylation modifications,including both histone and non-histone lactylation,are explored,with an emphasis on recent advancements in identifying the key regulatory enzymes of such modifications,such as lactylation writers and erasers.The effects and specific mechanisms of abnormal lactate metabolism in diverse neurological diseases are summarized,revealing that lactate acts as a signaling molecule in the regulation of brain functions and that abnormal lactate metabolism is implicated in the progression of various neurological disorders.Future research should focus on further elucidating the molecular mechanisms underlying lactate and lactylation modifications and exploring their potential as therapeutic targets for neurological diseases.展开更多
The large volume expansion and rapid capacity attenuation of tin-based electrodes are the main factors limiting their commercial application.The reasonable design of electrode material structure is particularly import...The large volume expansion and rapid capacity attenuation of tin-based electrodes are the main factors limiting their commercial application.The reasonable design of electrode material structure is particularly important for improving its electrochemical performance.Herein,phosphorus-modified graphene encapsulated Sn_(6)O_(4)(OH)_(4)nanoparticles composite(P-Sn_(6)O_(4)(OH)_(4)@RGO)with crystalline-amorphous heterostructure has been successfully designed and prepared.The design of crystalline-amorphous structure has largely enhanced the active sites,and the construction of a graphene encapsulation structure has greatly alleviated volume expansion.Notably,P-Sn_(6)O_(4)(OH)_(4)@RGO obtained an excellent high-rate longterm cycling performance for lithium-ion batteries anode,reaching a high specific capacity of 970 m Ah/g at 1.0 A/g after 1450 cycles.This work demonstrates that restructuring the electrode material's structure and phase through phosphorus modification can effectively improve the electrochemical performance of tin-based electrode materials.展开更多
基金supported by the Key Research and Development Program of Hebei Province(Grant Number 19273806D)the Project of Hebei Provincial Department of Education(Grant Number JQN2020042).
文摘To solve the problem of difficult utilization of steel slag,the liquid steel slag was modified and the air-quenching granulation process was carried out to make steel slag into a value-added end product:air-quenching granulated steel slag.The granulated slag was tested to analyze the variation rule of slag properties under different modification conditions.Based on the phase diagram of CaO–Si_(2)O–FeO–MgO–Al2O3 slag system,the feasibility of blast furnace(BF)slag as modifier was determined.When the addition of BF slag was increased from 0%to 35%,following results were obtained.The slag fluidity was improved,and the air-quenching temperature range was expanded.Then,the yield of air-quenched steel slag increased,while the granulation rate,the degree of sphericity,the compactness were decreased.Furthermore,the air-quenching granulation process could substantially improve the stability and the amorphous content of steel slag.The maximum removal rate of free CaO was above 80%and the amorphous content was up to 95%.Taking the factors of yield and properties of granulated steel slag into full consideration,the optimum proportion of BF slag is around 15%.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金Supported by Design and Performance Study of High-flux Metal Hydride Reactor Based on the Bionic Optimization(2078262)the‘Four-Chain’Integration Project at the Qinchuangyuan Chief Platform(S2025-YF-ZDXM)。
文摘As one of the most promising new energy sources,hydrogen energy is expected to usher in a full-fledged“hydrogen economy”in the 21st century.Compared with traditional high-pressure gaseous and cryogenic liquid hydrogen storage methods,solid-state chemical hydrogen storage shows significant advantages in safety,high efficiency,and cost-effectiveness.Magnesium-based lightweight hydrogen storage materials have attracted widespread attention due to their high gravimetric hydrogen storage density(7.6%)and favorable reversibility.However,their sluggish reaction kinetics and stringent operating conditions(with H2 release temperatures exceeding 350°C and H2 absorption pressures above 4 MPa)pose major challenges for practical applications.Domestic and international researchers have conducted in-depth studies to address these issues,achieving substantial progress in the modification of magnesium-based hydrogen storage alloys.This paper systematically elaborates on major modification techniques such as alloying,nanostructuring,and catalytic material doping,providing a comprehensive analysis of the strengths and limitations of each approach.Furthermore,it offers prospects for the future development of magnesium-based hydrogen storage materials by integrating current theoretical and experimental research findings.
文摘Platinum group metals have high melting points,strong corrosion resistance,stable chemical properties,and low oxygen permeability in high-temperature oxygen-containing environments.As thermal protective coating materials,they have gained essential applications in the aerospace field and have excellent prospects for application in frontier military fields,such as protecting hot-end components of hypersonic aircraft.This research reviewed the latest research progress of platinum group metal coatings with hightemperature oxidation resistance,including coating preparation techniques,oxidation failure,and alloying modification.The leading preparation techniques of current platinum group metal coatings were discussed,as well as the advantages and disadvantages of various existing preparation techniques.Besides,the intrinsic properties,failure forms,and failure mechanisms of coatings of single platinum group metal in high-temperature oxygen-containing environments were analyzed.On this basis,the necessity,main methods,and main achievements of alloying modification of platinum group metals were summarized.Finally,the future development of platinum group coatings with high-temperature oxidation resistance was discussed and prospected.
文摘Biomass-derived carbon materials are favored for their abundance and sustainability,and ease of preparation and modification.By surface activation and modification they can have a good electrical conductivity,excellent catalytic activity,a remarkable adsorption capacity,and different interfacial physicochemical functionalities.Surface-modified biochars have found wide applications in energy storage,environmental remediation,and catalysis.However,achieving precise and controllable modification of their active sites remains a challenge.Recent advances and future prospects for controlling their surface morphology,defect engineering,and surface coating strategies,with particular attention to their means of fabrication,are reviewed.
基金supported by the National Natural Science Foundation of China(Nos.82573045,82460602,82560459)the Hainan Provincial Graduate Student Innovative Research Project(No.Qhys2024-440).
文摘Post-translational modifications(PTMs)regulate the occurrence and development of cancer,and lactylation modification is a new form of PTMs.Recent studies have found that lactic acid modification can regulate the immune tolerance of cancer cells.The classical theory holds that prostate apoptosis response-4(PAR-4)is a tumor suppressor protein.However,our recent research has found that PAR-4 has a biological function of promoting cancer in hepatocellular carcinoma(HCC),and our analysis shows that PAR-4 can be modified of lactic acid.These research evidences suggest that PAR-4 lactylation modification may drive immune tolerance in HCC.Therefore,inhibiting PAR-4 lactylation modification is very likely to increase the sensitivity of HCC to immunotherapy.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
基金financial support by the National Key Research and Development Program of China(No.2023YFC2907801)the Hunan Provincial Natural Science Foundation of China(No.2023JJ40760)the Scientific and Technological Project of Yunnan Precious Metals Laboratory,China(No.YPML-2023050276)。
文摘Bentonite is a necessary binder in producing pellets.Its excessive use reduces the iron grade of pellets and increases production costs.Minimizing bentonite dosage is essential for producing high-quality iron ore pellets.Addressing the gap in the application of organically-intercalated modified bentonite in the pelletizing field,this study introduces an innovative modification process for bentonite that employs the synergistic effect of mechanical force and dimethyl sulfoxide to enhance the intercalation of organic compounds within bentonite,thus significantly enhancing its binding performance.The colloid value and swell capacity of modified bentonite(98.5 m L/3g and 55.0 m L/g)were much higher than the original bentonite(90.5 m L/3g and 17.5 m L/g).With the decrease of bentonite dosage from1.5wt%to 1.0wt%,the drop number of green pellets from a height of 0.5 m and the compressive strengths of roasted pellets using the modified bentonite(6.0 times and 2916 N per pellet)were significantly higher than those of the original bentonite(4.0 times and 2739 N per pellet).This study provides a comprehensive analysis of the intercalation modification mechanism of bentonite,offering crucial technical insights for the development of high-performance modified bentonite as iron ore pellet binders.
基金supported by the National Natural Science Foundation of China (52302259)the China Postdoctoral Science Foundation (CPSF) under Grant Number 2023M741479+4 种基金the Postdoctoral Fellowship Program of CPSF under Grant Number GZB20240280the Jiangxi Provincial Natural Science Foundation (20224ACB218006)the financial support from High-level Talent Research Special Funds of Jiangxi University of Science and Technology (Grant No. 205200100670)the Jiangxi Provincial Key Laboratory of Power Energy Storage Batteries and Materials (2024SSY10011)the Major Scientific and Technological Research R&D Special Project of Jiangxi Province(20244AFI92002)
文摘The implementation of multifunctional application scenarios for mobile terminal devices has increased the energy density requirements of batteries.Increasing the charging voltage can rapidly increase the specific capacity of layered transition metal oxides;however,it also exacerbates the release of lattice oxygen and the contraction of the unit cell.Ternary materials are designed in a secondary particle state to meet the requirements of power battery applications.Therefore,to create ternary materials that can operate under ultrahigh voltages,attention should be given to both surface modification and particle integrity maintenance.By utilizing elemental selenium(Se)with a low melting point,easy sublimation,and multiple variable valence states,deep grain boundary modification was implemented inside the particles.The performance of the cathode material was evaluated through pouch cells,and the improvement mechanism was explored through molecular dynamics simulation calculations.Under the protection of a three-dimensional Se-rich modified layer,LiNi_(1/3)Co_(1/3)Mn_(1/3)O_(2)achieved stable operation at ultrahigh voltages(4.6 V vs.Li/Li^(+));a sacrificial protection mechanism based on the chronic decomposition of the Se-rich layer was proposed to explain the efficacy of Se modification in stabilizing ternary materials.This deep grain boundary modification based on elemental Se provides a new solution for the ultrahigh-voltage operation of transition metal oxides and provides a scientific basis and technical support for solving the interface contact problem of all-solid-state batteries.
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.22334007).
文摘Perovskite solar cells have achieved remarkable progress in photovoltaic efficiency.However,interfacial defects at the buried and upper interfaces of perovskite layer remain a critical challenge,leading to charge recombination,ion migration,and iodine oxidation.To address this,we propose a novel all-in-one modification strategy employing ammonia borane(BNH6)as a multifunctional complex.By incorporating BNH6 at both buried and upper interfaces simultaneously,we achieve dualinterfacial defect passivation and iodide oxidation suppression through three key mechanisms:(1)hydrolysis-induced interaction with SnO_(2),(2)coordination with Pb^(2+),and(3)inhibition of I−oxidation.This approach significantly enhances device performance,yielding a champion power conversion efficiency(PCE)of 26.43%(certified 25.98%).Furthermore,the unencapsulated device demonstrates prominent enhanced operation stability,maintaining 90%of its initial PCE after 500 h under continuous illumination.Notably,our strategy eliminates the need for separate interface treatments,streamlining fabrication and offering a scalable route toward high-performance perovskite photovoltaics.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金National Natural Science Foundation of China(No.U2241205)the Natural Science Basic Research Program of Shaanxi(Nos.2022JC-33,2023-GHZD-35,and 2024JC-ZDXM-25)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National 111 Project to provide fund for conducting experiments。
文摘In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.
基金supported by the National Nature Science Foundation of China(62504130)National Key Research and Development Program of China(2018YFB0704100)+1 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong(Y01256331)the Technology Development Project of Henan Province(252102240047).
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金supported by the National Natural Science Foundation of China(Nos.U2341249,12005076,22205112)the Fundamental Research Funds for the Central Universities(No.2025201012)。
文摘The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.
文摘In order to eliminate the meshing interference between the flexspline and circular spline after the taper deformation of the flexspline,the radial deformation difference method,major and minor axis fitting method,and ellipse fitting method are used to modify the tooth thickness of the flexspline and analyze the performance indexes such as the assembly stress,transmission error,and fatigue life.Firstly,the conjugate tooth profile is solved based on the quadruple-circular-arc tooth profile and modified kinematic method.Then,based on the finite element radial deformation of the flexspline,the principle and characteristics of three modification methods are analyzed,and the modification amount of each section of the flexspline tooth is calculated.Finally,the influence of the three modification methods on the performance of the harmonic drive is compared.The results show that the radial deformation difference method can initially determine the modification amount.The minimum static assembly stress is 406.22 MPa by the major and minor axis fitting method.The ellipse fitting method has the best dynamic performance,small transmission error fluctuation,a peak-to-peak value of 3.060",and a maximum fatigue life of 10^(7.558)cycles.
基金financially sponsored by the National Natural Science Foundation of China(No.52204414)the National Energy-Saving and Low-Carbon Materials Production and Application Demonstration Platform Program,China(No.TC220H06N)+1 种基金the National Key R&D Program of China(No.2021YFC1910504)the Fundamental Research Funds for the Central Universities,China(No.FRFTP-20-097A1Z)。
文摘MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO_(x)-CeO_(2)catalyst that achieves enhanced NO conversion rate and stability under harsh conditions.The catalyst was synthesized by decorating MnOx crystals with amorphous CeO_(2),followed by loading hydrophobic silica on the external surfaces.The hydrophobic silica allowed the adsorption of NH_(3)and NO and diffusion of H,suppressed the adsorption of H_(2)O,and prevented SO_(2)interaction with the Mn active sites,achieving selective molecular discrimination at the catalyst surface.At 120℃,under H_(2)O and SO_(2)exposure,the optimal hydrophobic catalyst maintains 82%NO conversion rate compared with 69%for the unmodified catalyst.The average adsorption energies of NH_(3),H_(2)O,and SO_(2)decreased by 0.05,0.43,and 0.52 eV,respectively.The NO reduction pathway follows the Eley-Rideal mechanism,NH_(3)^(*)+*→NH_(2)^(*)+H^(*)followed by NH_(2)^(*)+NO^(*)→N_(2)^(*)+H_(2)O^(*),with NH_(3)dehydrogenation being the rate determining step.Hydrophobic modification increased the activation energy for H atom transfer,leading to a minor decrease in the NO conversion rate at 120℃.This work demonstrates a viable strategy for developing robust NH_(3)-S CR catalysts capable of efficient operation in water-and sulfur-rich environments.
文摘We are sorry for the mistakes of Affiliation,"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,Donghua University,Shanghai 201620,China"should be replaced by"a State Key Laboratory of Advanced Fiber Materials,Center for Advanced Low-Dimension Materials,College of Materials Science and Engineering,Donghua University,Shanghai 201620,China".We apologized for the inconvenience caused by this error.
基金supported by grants from the Major Projects of Health Science Research Foundation for Middle-Aged and Young Scientist of Fujian Province,China,No.2022ZQNZD01010010the National Natural Science Foundation of China,No.82371390Fujian Province Scientific Foundation,No.2023J01725(all to XC).
文摘The neuroinflammatory response mediated by microglial activation plays an important role in the secondary nerve injury of traumatic brain injury.The post-transcriptional modification of N^(6)-methyladenosine is ubiquitous in the immune response of the central nervous system.The fat mass and obesity-related protein catalyzes the demethylation of N^(6)-methyladenosine modifications on mRNA and is widely expressed in various tissues,participating in the regulation of multiple diseases’biological processes.However,the role of fat mass and obesity in microglial activation and the subsequent neuroinflammatory response after traumatic brain injury is unclear.In this study,we found that the expression of fat mass and obesity was significantly down-regulated in both lipopolysaccharide-treated BV2 cells and a traumatic brain injury mouse model.After fat mass and obesity interference,BV2 cells exhibited a pro-inflammatory phenotype as shown by the increased proportion of CD11b^(+)/CD86^(+)cells and the secretion of pro-inflammatory cytokines.Fat mass and obesity-mediated N^(6)-methyladenosine demethylation accelerated the degradation of ADAM17 mRNA,while silencing of fat mass and obesity enhanced the stability of ADAM17 mRNA.Therefore,down-regulation of fat mass and obesity expression leads to the abnormally high expression of ADAM17 in microglia.These results indicate that the activation of microglia and neuroinflammatory response regulated by fat mass and obesity-related N^(6)-methyladenosine modification plays an important role in the pro-inflammatory process of secondary injury following traumatic brain injury.
基金supported by Applied Basic Research Joint Fund Project of Yunnan Province,No.202301AY070001-200Middle-aged Academic and Technical Training Project for High-Level Talents,No.202105AC160065+1 种基金Yunnan Clinical Medical Center for Neurological and Cardiovascular Diseases,No.YWLCYXZX2023300077Key Clinical Specialty of Neurology in Yunnan Province,No.300064(all to CL)。
文摘Research into lactylation modifications across various target organs in both health and disease has gained significant attention.Many essential life processes and the onset of diseases are not only related to protein abundance but are also primarily regulated by various post-translational protein modifications.Lactate,once considered merely a byproduct of anaerobic metabolism,has emerged as a crucial energy substrate and signaling molecule involved in both physiological and pathological processes within the nervous system.Furthermore,recent studies have emphasized the significant role of lactate in numerous neurological diseases,including Alzheimer's disease,Parkinson's disease,acute cerebral ischemic stroke,multiple sclerosis,Huntington's disease,and myasthenia gravis.The purpose of this review is to synthesize the current research on lactate and lactylation modifications in neurological diseases,aiming to clarify their mechanisms of action and identify potential therapeutic targets.As such,this work provides an overview of the metabolic regulatory roles of lactate in various disorders,emphasizing its involvement in the regulation of brain function.Additionally,the specific mechanisms of brain lactate metabolism are discussed,suggesting the unique roles of lactate in modulating brain function.As a critical aspect of lactate function,lactylation modifications,including both histone and non-histone lactylation,are explored,with an emphasis on recent advancements in identifying the key regulatory enzymes of such modifications,such as lactylation writers and erasers.The effects and specific mechanisms of abnormal lactate metabolism in diverse neurological diseases are summarized,revealing that lactate acts as a signaling molecule in the regulation of brain functions and that abnormal lactate metabolism is implicated in the progression of various neurological disorders.Future research should focus on further elucidating the molecular mechanisms underlying lactate and lactylation modifications and exploring their potential as therapeutic targets for neurological diseases.
基金supported by the Natural Science Foundation of Shandong Province(Nos.ZR2024QE450,ZR2024QB302 and ZR2024QB004)the Taishan Scholars and Young Experts Program of Shandong Province(No.tsqn202211249)Research Program of Qilu Institute of Technology(Nos.QIT 23TP019,QIT23TP010 and QIT24NN007)。
文摘The large volume expansion and rapid capacity attenuation of tin-based electrodes are the main factors limiting their commercial application.The reasonable design of electrode material structure is particularly important for improving its electrochemical performance.Herein,phosphorus-modified graphene encapsulated Sn_(6)O_(4)(OH)_(4)nanoparticles composite(P-Sn_(6)O_(4)(OH)_(4)@RGO)with crystalline-amorphous heterostructure has been successfully designed and prepared.The design of crystalline-amorphous structure has largely enhanced the active sites,and the construction of a graphene encapsulation structure has greatly alleviated volume expansion.Notably,P-Sn_(6)O_(4)(OH)_(4)@RGO obtained an excellent high-rate longterm cycling performance for lithium-ion batteries anode,reaching a high specific capacity of 970 m Ah/g at 1.0 A/g after 1450 cycles.This work demonstrates that restructuring the electrode material's structure and phase through phosphorus modification can effectively improve the electrochemical performance of tin-based electrode materials.
