High-pressure and high-temperature(HPHT)experiments in large-volume presses(LVPs)benefit from reliable,available,and affordable heaters to achieve stable and homogeneous heating and,in some circumstances,X-ray transpa...High-pressure and high-temperature(HPHT)experiments in large-volume presses(LVPs)benefit from reliable,available,and affordable heaters to achieve stable and homogeneous heating and,in some circumstances,X-ray transparency for monitoring of properties of an in situ experiment using X-ray diffraction and contrast imaging techniques.We have developed heaters meeting the above requirements,and we screen the ternary system TiB2–SiC–hexagonal(h)BN(denoted as TSB)to enable manufacture of X-ray transparent heaters for HPHT runs.Heaters fabricated using optimized TSB-631(60%TiB2–30%SiC–10%hBN by weight)have been tested in modified truncated assemblies,showing excellent performance up to 22 GPa and 2395 K in HPHT runs.TSB-631 has good ceramic machinability,outstanding reproducibility,high stability,and negligible temperature gradient for runs at 3–7 GPa with cell assemblies with truncated edge lengths of 8–12 mm.The fabricated heaters not only show excellent performance in HPHT runs,but also demonstrate high X-ray transparency over a wide X-ray wavelength region,indicating potential applications for in situ X-ray diffraction/imaging under HPHT conditions in LVPs and other high-pressure apparatus.展开更多
The solubility of Au in silicate melts and fluids governs the enrichment and migration of Au during the formation of magmatic-hydrothermal Au deposits.Large Au deposits require vast amounts of Au to migrate from the u...The solubility of Au in silicate melts and fluids governs the enrichment and migration of Au during the formation of magmatic-hydrothermal Au deposits.Large Au deposits require vast amounts of Au to migrate from the upper mantle-lower crust to the shallow crust,and high Au solubility in magma and hydrothermal fluid facilitates the formation of Au-rich magma and fluid in the crust and mantle source and efficient transport.This paper reviews recent high-pressure and high-temperature experimental studies on Au species in magmas and hydrothermal fluids,the partitioning behavior of Au between silicate melts and fluids,and the effects of temperature,pressure,oxygen fugacity,sulfur fugacity,silicate melt composition,and volatiles(H2O,CO2,chlorine,and sulfur)on the solubility of Au in magma.We show that the solubility of Au in magma is largely controlled by the volatiles in the magma:the higher the content of reduced sulfur(S2-and HS-)in the magma,the higher the solubility of Au.Under high-temperature,high-pressure,H2O-rich,and intermediate oxygen fugacity conditions,magma can dissolve more reduced sulfur species,thus enhancing the ability of the magma to transport Au.If the ore-forming elements of the Au deposits in the North China Craton originate from mantle-derived magmas and fluids,we can conclude,in terms of massive Au migration,that these deep Au-rich magmas might have been generated under H2 O-rich and moderately oxidized conditions(S2-coexists with S6+).The big mantle wedge beneath East Asia was metasomatized by melts and fluids from the dehydration of the Early Cretaceous paleo-Pacific stagnant slab,which not only caused thinning of the North China Craton,but also created physicochemical conditions favorable for massive Au migration.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
Pathological scarring,manifested in the form of hypertrophic scars(HTS)and keloid scars(KS),represents a major clinical challenge due to its aesthetic and functional implications for patients.Understanding the molecul...Pathological scarring,manifested in the form of hypertrophic scars(HTS)and keloid scars(KS),represents a major clinical challenge due to its aesthetic and functional implications for patients.Understanding the molecular mechanisms involved in these types of scars and developing effective treatments requires the use of controlled ex-perimental models,especially animals,to overcome the limitations of clinical studies.The aim of this sistematic review is to critically analyze the animal models used in the last five years(2020-2025)for the study of pathological scars,highlighting their advantages,limitations and applicability in the development of new therapeutic strat-egies.Murine,rabbit and porcine models,as well as alternative models,offer varied perspectives on the formation and treatment of HTS and KS,with an emphasis on histological and molecular correlations with human pathology.By synthesizing recent data,the paper highlights the essential role of preclinical research in optimizing an-tifibrotic treatments and in advancing the translation of data into the clinical sphere.Overall,animal models remain essential for bridging mechanistic insights with clinical translation,supporting the development of more effective and personalized anti-scar therapies.展开更多
Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results ...Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results were obtained.Firstly,at pressures lower than 53GPa,the opaque minerals still keep the unmelted state,while at 78 GPa and higher,FeNi metal and troilite form eutectic intergrowths occurring as disorderly fine veinlets filling the shock-induced fractures in silicate minerals.Secondly,single kamacite grains still maintain their contour at 12 GPa,but a part of brittle troilite grains was fragmented and squeezed into the shock-induced fractures within kamacite grains.At53 and 133 GPa,many more troilite fragments are poured in the kamacite interior to form disordered hybrid aggregates or to form squiggly strips,respectively.Similar phenomena are observed within single troilite grains,but the mineral squeezed into troilite grains is kamacite.Thirdly,chromite is a hard and refractory oxide mineral.When the shock pressure rises step by step from 12 to 133 GPa,the shock effect of chromite is only fragmentation.Its grain size decreases from tens of um at 53 GPa to a few um at 133 GPa.And,fourthly,native copper exhibits distinct redistribution behavior at high temperature.In Jilin samples shock-loaded to 12 GPa,copper initially located at troilite-kamacite interfaces partially transferred into small troilite grains containing fine FeNi particles.At 53 and 133 GPa,native copper preferentially transferred into larger troilite grains containing more particles of eutectic FeNi metal.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved cerami...In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.展开更多
To meet the need for cultivating application-oriented talents in local universities,this study introduced a project-based learning approach into the reform of bioinformatics experimental teaching.The course was struct...To meet the need for cultivating application-oriented talents in local universities,this study introduced a project-based learning approach into the reform of bioinformatics experimental teaching.The course was structured around a project titled"Influenza Virus Analysis",comprising four progressive modules:database utilization and information retrieval,sequence alignment and phylogenetic analysis,functional and structural prediction,and omics data analysis.These modules were integrated into a coherent research workflow that connected fragmented knowledge and technical skills.During implementation,flipped classroom and group collaboration methods were employed,alongside the establishment of a diversified assessment system emphasizing process evaluation.Teaching practice indicates that the reform effectively enhances students professional application skills,learning experience,and scientific literacy,facilitating a shift from"tool operation"to"problem-solving"capabilities.This study provides a reference model for the reform of bioinformatics experimental teaching in local universities.展开更多
Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study invest...Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.展开更多
To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general predic...To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general prediction frameworks.This study employs an integrated approach that combines true-triaxial unloading experiments with three-dimensional grain-based discrete element modeling(PFC3D-GBM)to examine the effects of σ_(2) on strain systematically burst and elucidate the underlying mechanisms.Through this dual experimental–numerical methodology,the strainburst characteristics under varying σ_(2) are analyzed in detail regarding mechanical responses,failure evolution and patterns,microscope fracture mechanisms,and energy partitioning.The results indicate that elevated σ_(2) can enhance the bearing capacity of rock,thereby necessitating a higher stress condition required for strainburst.However,it also enlarges the potential strainburst intensity,manifesting as deeper rockburst pits and more violent ejection of rock fragments.An increasing σ_(2) facilitates the microscope transgranular fractures,inhibits intergranular tensile fractures,and raises the kinetic energy conversion ratio slightly.It affects the intensity of strainburst through the following mechanisms,including the increase of energy storage limit,the intensification of Poisson effect for lateral expansion,and the enhancement of the transgranular fracturing mechanism.In practical engineering,the depth and range of support needs to be ensured under high σ_(2) conditions,and it is recommended to use prestressing techniques to control the development of significant slabbing.展开更多
4-Bromo-3-methylphenol(BMP)is an important chemical intermediate with wide applications in the fields of medicine and pesticides.The synthesis of BMP from m-cresol via bromination is easy to carry out on an industrial...4-Bromo-3-methylphenol(BMP)is an important chemical intermediate with wide applications in the fields of medicine and pesticides.The synthesis of BMP from m-cresol via bromination is easy to carry out on an industrial scale.However,due to the formation of regioisomeric impurities during bromination and the low melting point of BMP,the separation process is prone to the formation of oily substances,resulting in low yield and purity.In this work,a new cocrystallization engineering approach was proposed to separate and purify BMP.Through design of experiments,the cocrystallization process of BMP and triethylenediamine(DABCO)was optimized using a minimum-run resolution IV screening design combined with response surface methodology.In addition,the obtained 2BMP-DABCO powder was characterized by thermal analysis,powder X-ray diffraction,infrared spectroscopy,and scanning electron microscopy.Single crystals of 2BMP-DABCO were grown from acetone by slow evaporation,and detailed structural information was obtained through single-crystal X-ray diffraction.The self-assembly mechanism was further clarified by density functional theory calculations.This study provides a simple,robust,and scalable method for the production of BMP and offers a reference for the separation and purification of phenolic substances.展开更多
Modelling of migration and accumulation of elements Au and Ag in rocks under temperatures of 350–450°C and a confining pressure of 300 MPa and axial pressure of 100–150 MPa is conducted. It is found that the co...Modelling of migration and accumulation of elements Au and Ag in rocks under temperatures of 350–450°C and a confining pressure of 300 MPa and axial pressure of 100–150 MPa is conducted. It is found that the contents of gold and silver get higher in metallic sulphides such as pyrite, chalcopyrite and sphalerite as well as in quartz and muscovite, and get lower in chlorite, biotite, seriate, albite and calcite, showing that tectono-dynamics is one of the important factors for petrogenesis and metallogenesis.展开更多
To investigate the influence of temperature on the physical,mechanical and acoustic emission characteristics of granites,uniaxial compression test,variable-angle shear test,acoustic emission signal monitoring and the ...To investigate the influence of temperature on the physical,mechanical and acoustic emission characteristics of granites,uniaxial compression test,variable-angle shear test,acoustic emission signal monitoring and the measurement of physical parameters including mass,size and P-wave velocity were carried out on granite samples treated at temperatures T ranging from 25 to 900℃.The results show that the density and P-wave velocity decrease gradually with increasing T.As the temperature increases,the peak compressive stress decreases while the peak strain increases,due to the fact that a high temperature induces the escaping of waters within granites,the expanding of mineral grains and the generations of fractures.With the increment of T,both the peak shear stress and the cohesion decrease,whereas the frictional angle increases.During the compressing and shearing tests,the maximum acoustic emission counts show a decreasing trend when T increases from 25 to 900℃.When T exceeds 573℃,the crystal lattice structure of quartz changes fromα-phase toβ-phase,decreasing the mechanical behavior of granites to a great extent.In addition,the results also indicate that T=500−600℃ is the critical temperature ramge to characterize the influence of temperature on the physical,mechanical and acoustic emission characteristics of granites.展开更多
A high-temperature reduction roasting method was used to achieve metallic iron and zinc recovery from blast furnace gas ash(BFA).The reduction processes for Zn-containing and Fe-containing oxides were analyzed in deta...A high-temperature reduction roasting method was used to achieve metallic iron and zinc recovery from blast furnace gas ash(BFA).The reduction processes for Zn-containing and Fe-containing oxides were analyzed in detail by using ther-modynamic equilibrium calculation and the principle of minimum free energy.The results showed that the main reaction in the system is the reduction of ZnFe_(2)_(4)and iron oxides.Over the full temperature range,iron oxides were more easily reduced than zinc oxides.Regardless of the amount of CO contained in the system,the reduction of ZnO to Zn was difficult to proceed below the boiling point(906℃)of Zn.When the reduction temperature is below 906℃,the reduction process of zinc ferrate was ZnFe_(2)_(4)→ZnO;when the reduction temperature is above 906℃,its reduction process becomed ZnFe_(2)_(4)→ZnO→Zn(g).The metallization and dezincification rates of the BFA gradually increased with increasing reaction temperature.As the C/O ratio increased,the metallization and dezincification rates first increased and then decreased.The effect of reduction time on BFA reduction was similar to that of reaction temperature.展开更多
Tuite has been suggested as a potential reservoir for trace elements in the deep mantle,but no evidence confirms this supposition.By using a natural apatite as starting material,the trace-element-bearing tuite large c...Tuite has been suggested as a potential reservoir for trace elements in the deep mantle,but no evidence confirms this supposition.By using a natural apatite as starting material,the trace-element-bearing tuite large crystals were obtained under highpressure and high-temperature conditions(15 GPa and 1800 K).X-ray diffraction pattern and Micro-Raman spectrum of the run product confirm that tuite was synthesized.The concentrations of trace elements in tuite crystals were analyzed by laser ablation-inductively coupled plasma-mass spectrometry(LA-ICP-MS).The rare earth element patterns of tuite show enrichment of light rare earth elements relative to heavy rare earth elements.Tuite shows high concentrations of Th and Sr,and negative anomalies of Rb,Nb,and Hf.The results show that tuite can accommodate a large amount of trace elements.Tuite might be an important host to accommodate trace elements if there is much apatite subducted into the deep mantle.展开更多
The sealing integrity of cement sheath in offshore wells is seriously threatened under high-temperature conditions,resulting in gas channeling and other problems.Given the lack of experimental results,in this study re...The sealing integrity of cement sheath in offshore wells is seriously threatened under high-temperature conditions,resulting in gas channeling and other problems.Given the lack of experimental results,in this study relevant samples of a cement slurry sealing section of a typical offshore high-temperature well have been prepared and analyzed.In particular,the mechanical properties have been assessed with a triaxial pressure servo instrument and a high-temperature curing kettle.The density and the Poisson’s ratio of the samples have also been tested.The stress-strain curve has been drawn to obtain the elastic modulus and the compressive strength.The rock brittleness index has been calculated according to the measured elastic modulus and the Poisson’s ratio,together with the brittleness and the compressibility of the cement samples.The test results show that the mechanical properties and bonding strength of the cement samples are optimal at 130°C,medium at 150°C,and poor at 180°C.展开更多
Valve-regulated-lead-acid (VRLA) battery charging performed in high-temperature environments is extremely risky under overcharge conditions, and may lead to a subsequent thermal runaway. A new pressure-controlled char...Valve-regulated-lead-acid (VRLA) battery charging performed in high-temperature environments is extremely risky under overcharge conditions, and may lead to a subsequent thermal runaway. A new pressure-controlled charging method was adopted and the charging characteristics of the pressure-controlled VRLA battery in high-temperature environments were ex-perimentally studied. The concept was tested in a large temperature gradient to obtain more details about the effects of users' accustomed charging and discharging modes on battery capacity. The premature capacity loss (PCL) phenomenon under high temperature exposure was analyzed. The results showed that the capacity loss could be recovered by charging using a large current.展开更多
This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereper...This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereperformed by pouring one or several Zirconia spheres with various high-temperature and a diameter of 3～ 10 mminto a water pool. The particles falling-down speeds were recorded by high-speed photographic instrumentation,and pressures and water temperatures were measured. A comparison between the experiments with cold and hotspheres respectively, employing three different sphere types each, was presented. The experimental data, com-pared with the theory of the evaporation drag model, are nearly identical.展开更多
High-temperature circulating fans blow 800 ℃ HN protective atmosphere to the surface of the strip as a jet heating power source or suspending source,playing a core role in metal strip continuous annealing furnaces. I...High-temperature circulating fans blow 800 ℃ HN protective atmosphere to the surface of the strip as a jet heating power source or suspending source,playing a core role in metal strip continuous annealing furnaces. In this study,several high-temperature alloys were experimentally compared based on their high-temperature mechanical properties,high-temperature creep resistance,and high-temperature oxidation resistance. The results indicate that though the price of HR-120 alloy is only half of Inconel 601,it is suitable for the manufacture of fans that can withstand a high temperature of 800 ℃ given its good creep resistance,high-temperature oxidation resistance,and price advantage.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant Nos.22090041 and 22401297)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2022B1515120014).
文摘High-pressure and high-temperature(HPHT)experiments in large-volume presses(LVPs)benefit from reliable,available,and affordable heaters to achieve stable and homogeneous heating and,in some circumstances,X-ray transparency for monitoring of properties of an in situ experiment using X-ray diffraction and contrast imaging techniques.We have developed heaters meeting the above requirements,and we screen the ternary system TiB2–SiC–hexagonal(h)BN(denoted as TSB)to enable manufacture of X-ray transparent heaters for HPHT runs.Heaters fabricated using optimized TSB-631(60%TiB2–30%SiC–10%hBN by weight)have been tested in modified truncated assemblies,showing excellent performance up to 22 GPa and 2395 K in HPHT runs.TSB-631 has good ceramic machinability,outstanding reproducibility,high stability,and negligible temperature gradient for runs at 3–7 GPa with cell assemblies with truncated edge lengths of 8–12 mm.The fabricated heaters not only show excellent performance in HPHT runs,but also demonstrate high X-ray transparency over a wide X-ray wavelength region,indicating potential applications for in situ X-ray diffraction/imaging under HPHT conditions in LVPs and other high-pressure apparatus.
基金Project of China(Grant No.2016YFC0600104),the National Natural Science Foundation of China(Grant No.41573053)the Youth Innovation Promotion Association CAS(Grant No.2019344)。
文摘The solubility of Au in silicate melts and fluids governs the enrichment and migration of Au during the formation of magmatic-hydrothermal Au deposits.Large Au deposits require vast amounts of Au to migrate from the upper mantle-lower crust to the shallow crust,and high Au solubility in magma and hydrothermal fluid facilitates the formation of Au-rich magma and fluid in the crust and mantle source and efficient transport.This paper reviews recent high-pressure and high-temperature experimental studies on Au species in magmas and hydrothermal fluids,the partitioning behavior of Au between silicate melts and fluids,and the effects of temperature,pressure,oxygen fugacity,sulfur fugacity,silicate melt composition,and volatiles(H2O,CO2,chlorine,and sulfur)on the solubility of Au in magma.We show that the solubility of Au in magma is largely controlled by the volatiles in the magma:the higher the content of reduced sulfur(S2-and HS-)in the magma,the higher the solubility of Au.Under high-temperature,high-pressure,H2O-rich,and intermediate oxygen fugacity conditions,magma can dissolve more reduced sulfur species,thus enhancing the ability of the magma to transport Au.If the ore-forming elements of the Au deposits in the North China Craton originate from mantle-derived magmas and fluids,we can conclude,in terms of massive Au migration,that these deep Au-rich magmas might have been generated under H2 O-rich and moderately oxidized conditions(S2-coexists with S6+).The big mantle wedge beneath East Asia was metasomatized by melts and fluids from the dehydration of the Early Cretaceous paleo-Pacific stagnant slab,which not only caused thinning of the North China Craton,but also created physicochemical conditions favorable for massive Au migration.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
基金Ministry of Research,Innovation and Digitization,CCCDI-UEFISCDI,Grant/Award Number:PN-IV-P7-7.1-PED-2024-1578,within PNCDI Ⅳ.
文摘Pathological scarring,manifested in the form of hypertrophic scars(HTS)and keloid scars(KS),represents a major clinical challenge due to its aesthetic and functional implications for patients.Understanding the molecular mechanisms involved in these types of scars and developing effective treatments requires the use of controlled ex-perimental models,especially animals,to overcome the limitations of clinical studies.The aim of this sistematic review is to critically analyze the animal models used in the last five years(2020-2025)for the study of pathological scars,highlighting their advantages,limitations and applicability in the development of new therapeutic strat-egies.Murine,rabbit and porcine models,as well as alternative models,offer varied perspectives on the formation and treatment of HTS and KS,with an emphasis on histological and molecular correlations with human pathology.By synthesizing recent data,the paper highlights the essential role of preclinical research in optimizing an-tifibrotic treatments and in advancing the translation of data into the clinical sphere.Overall,animal models remain essential for bridging mechanistic insights with clinical translation,supporting the development of more effective and personalized anti-scar therapies.
基金Science and Technology Planning Project of Guangdong Province,2023B1212060048,Xiande Xie。
文摘Recovered samples of Jilin H5 chondrite experimentally shocked to 12-133 GPa were studied to explore the behavior of opaque minerals under shock loading using SEM-EDS,Raman spectroscopy,and TIMA.The following results were obtained.Firstly,at pressures lower than 53GPa,the opaque minerals still keep the unmelted state,while at 78 GPa and higher,FeNi metal and troilite form eutectic intergrowths occurring as disorderly fine veinlets filling the shock-induced fractures in silicate minerals.Secondly,single kamacite grains still maintain their contour at 12 GPa,but a part of brittle troilite grains was fragmented and squeezed into the shock-induced fractures within kamacite grains.At53 and 133 GPa,many more troilite fragments are poured in the kamacite interior to form disordered hybrid aggregates or to form squiggly strips,respectively.Similar phenomena are observed within single troilite grains,but the mineral squeezed into troilite grains is kamacite.Thirdly,chromite is a hard and refractory oxide mineral.When the shock pressure rises step by step from 12 to 133 GPa,the shock effect of chromite is only fragmentation.Its grain size decreases from tens of um at 53 GPa to a few um at 133 GPa.And,fourthly,native copper exhibits distinct redistribution behavior at high temperature.In Jilin samples shock-loaded to 12 GPa,copper initially located at troilite-kamacite interfaces partially transferred into small troilite grains containing fine FeNi particles.At 53 and 133 GPa,native copper preferentially transferred into larger troilite grains containing more particles of eutectic FeNi metal.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金National Natural Science Foundation of China(No.U2241205)the Natural Science Basic Research Program of Shaanxi(Nos.2022JC-33,2023-GHZD-35,and 2024JC-ZDXM-25)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National 111 Project to provide fund for conducting experiments。
文摘In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.
基金Supported by Undergraduate Higher Education Teaching Quality and Reform Projects of Guangdong Province(Yuejiao Gao Han[2024]No.9,Yuejiao Gao Han[2024]No.30)Guangdong Basic and Applied Basic Research Foundation(2023A1515110973)+1 种基金Guangdong Provincial Young Innovative Talents Project of General Colleges and Universities(2023KQNCX089)Quality Engineering and Teaching Reform Projects of Zhaoqing University(zlgc202239,zlgc202207,zlgc2024005,zlgc2024038).
文摘To meet the need for cultivating application-oriented talents in local universities,this study introduced a project-based learning approach into the reform of bioinformatics experimental teaching.The course was structured around a project titled"Influenza Virus Analysis",comprising four progressive modules:database utilization and information retrieval,sequence alignment and phylogenetic analysis,functional and structural prediction,and omics data analysis.These modules were integrated into a coherent research workflow that connected fragmented knowledge and technical skills.During implementation,flipped classroom and group collaboration methods were employed,alongside the establishment of a diversified assessment system emphasizing process evaluation.Teaching practice indicates that the reform effectively enhances students professional application skills,learning experience,and scientific literacy,facilitating a shift from"tool operation"to"problem-solving"capabilities.This study provides a reference model for the reform of bioinformatics experimental teaching in local universities.
基金funded by the Natural Science Foundation of China(Grants No 42277127)。
文摘Rock-ice avalanches in cold high-mountain regions pose severe hazards due to their high mobility,yet the quantitative controls of particle-size ratio and ice content remain insufficiently constrained.This study investigates their coupled effects using inclinedflume experiments and Discrete Element Method(DEM)simulations,covering three gravel sizes(2-5 mm,5-7 mm,7-10 mm)and four ice-content levels(0%,20%,40%,60%).Run-out distance,velocity,energy components,flow regime(Savage number),and segregation indexαwere quantified.Increasing ice content significantly enhances mobility,but with diminishing marginal effectiveness.From 0%to 40%ice content,run-out distance increases by 41%-86%,whereas the additional increase from 40%to 60%contributes only 12%-23%.Particle-size ratio strongly governs segregation intensity.Fine-gravel groups reach segregation indices ofα=0.92-0.98,indicating nearly complete upward migration of ice,whereas medium-gravel and coarse-gravel groups exhibit much weaker segregation,stabilizing atα=0.68-0.74 and 0.60-0.69.Savage number analyses reveal marked flow-regime transitions.At 0%ice content,Savage numbers reach 1.0-1.5,indicating a collisional regime.Increasing ice content suppresses collisionality,with Savage numbers decreasing to 0.03-0.07 at 60%ice content,consistent with dense-regime flow.DEM energy analyses confirm this regime shift:for finegravel mixtures,collision energy decreases by 14%,while sliding-friction energy increases by 33%as ice content increases from 0%to 60%,reflecting enhanced overburden effects imposed by upward-segregated ice layers.Medium and coarse mixtures exhibit weaker or opposite energy-shift patterns,demonstrating strong size dependence.Mechanistically,large particle-size contrasts promote strong segregation and form dense basal rock layers that increase basal friction and reduce mobility.When particle sizes are similar or ice content is high,segregation remains limited,allowing ice to mix into the basal layer,thereby reducing basal friction and enhancing mobility.This research quantitatively demonstrates how composition controls particle spatial distribution,flow regime,and energy dissipation,offering new mechanistic insights into the propagation and deposition behaviors of rock-ice avalanches and improving hazard assessment in vulnerable high-mountain regions.
基金supported by the National Natural Science Foundation of China(No.42507210)the Fundamental Research Funds for the Central Universities(No.2025XJSB01)+1 种基金the State Key Laboratory for Tunnel Engineering(No.SKLTEK202421)the Foundation of Key Laboratory of Deep Coal Resource Mining(China University of Mining and Technology),Ministry of Education(No.KLDCRMMOE24KF11).
文摘To improve the accuracy of rockburst risk evaluation in mining and tunnelling engineering,the influence of intermediate principal stress σ_(2) deserves further consideration,which has been neglected in general prediction frameworks.This study employs an integrated approach that combines true-triaxial unloading experiments with three-dimensional grain-based discrete element modeling(PFC3D-GBM)to examine the effects of σ_(2) on strain systematically burst and elucidate the underlying mechanisms.Through this dual experimental–numerical methodology,the strainburst characteristics under varying σ_(2) are analyzed in detail regarding mechanical responses,failure evolution and patterns,microscope fracture mechanisms,and energy partitioning.The results indicate that elevated σ_(2) can enhance the bearing capacity of rock,thereby necessitating a higher stress condition required for strainburst.However,it also enlarges the potential strainburst intensity,manifesting as deeper rockburst pits and more violent ejection of rock fragments.An increasing σ_(2) facilitates the microscope transgranular fractures,inhibits intergranular tensile fractures,and raises the kinetic energy conversion ratio slightly.It affects the intensity of strainburst through the following mechanisms,including the increase of energy storage limit,the intensification of Poisson effect for lateral expansion,and the enhancement of the transgranular fracturing mechanism.In practical engineering,the depth and range of support needs to be ensured under high σ_(2) conditions,and it is recommended to use prestressing techniques to control the development of significant slabbing.
基金supported by the National Natural Science Foundation of China(22177011(R.Z.Qiao),21977012(R.Z.Qiao),and 21572018(C.Li))the National High-Level Hospital Clinical Research Funding(2023-NHLHCRF-YXHZ-ZRMS-02)the Joint Project of BRCBC(Biomedical Translational Engineering Research Center of BUCT-CJFH)(XK2020-06).
文摘4-Bromo-3-methylphenol(BMP)is an important chemical intermediate with wide applications in the fields of medicine and pesticides.The synthesis of BMP from m-cresol via bromination is easy to carry out on an industrial scale.However,due to the formation of regioisomeric impurities during bromination and the low melting point of BMP,the separation process is prone to the formation of oily substances,resulting in low yield and purity.In this work,a new cocrystallization engineering approach was proposed to separate and purify BMP.Through design of experiments,the cocrystallization process of BMP and triethylenediamine(DABCO)was optimized using a minimum-run resolution IV screening design combined with response surface methodology.In addition,the obtained 2BMP-DABCO powder was characterized by thermal analysis,powder X-ray diffraction,infrared spectroscopy,and scanning electron microscopy.Single crystals of 2BMP-DABCO were grown from acetone by slow evaporation,and detailed structural information was obtained through single-crystal X-ray diffraction.The self-assembly mechanism was further clarified by density functional theory calculations.This study provides a simple,robust,and scalable method for the production of BMP and offers a reference for the separation and purification of phenolic substances.
文摘Modelling of migration and accumulation of elements Au and Ag in rocks under temperatures of 350–450°C and a confining pressure of 300 MPa and axial pressure of 100–150 MPa is conducted. It is found that the contents of gold and silver get higher in metallic sulphides such as pyrite, chalcopyrite and sphalerite as well as in quartz and muscovite, and get lower in chlorite, biotite, seriate, albite and calcite, showing that tectono-dynamics is one of the important factors for petrogenesis and metallogenesis.
基金Projects(51979272,BZ2020066)supported by the National Natural Science Foundation of ChinaProjet supported by the Department of Science and Technology of Jiangsu Province,China。
文摘To investigate the influence of temperature on the physical,mechanical and acoustic emission characteristics of granites,uniaxial compression test,variable-angle shear test,acoustic emission signal monitoring and the measurement of physical parameters including mass,size and P-wave velocity were carried out on granite samples treated at temperatures T ranging from 25 to 900℃.The results show that the density and P-wave velocity decrease gradually with increasing T.As the temperature increases,the peak compressive stress decreases while the peak strain increases,due to the fact that a high temperature induces the escaping of waters within granites,the expanding of mineral grains and the generations of fractures.With the increment of T,both the peak shear stress and the cohesion decrease,whereas the frictional angle increases.During the compressing and shearing tests,the maximum acoustic emission counts show a decreasing trend when T increases from 25 to 900℃.When T exceeds 573℃,the crystal lattice structure of quartz changes fromα-phase toβ-phase,decreasing the mechanical behavior of granites to a great extent.In addition,the results also indicate that T=500−600℃ is the critical temperature ramge to characterize the influence of temperature on the physical,mechanical and acoustic emission characteristics of granites.
基金This work was supported by the National Natural Science Foundation of China(Grant No.51704021)Key Research and Development Projects of Sichuan Province(021YFG0114)+1 种基金Key Research and Development Projects of Shandong Province(2021CXGC010209)the Joint Funds of the National Natural Science Foundation of China(U1560203).
文摘A high-temperature reduction roasting method was used to achieve metallic iron and zinc recovery from blast furnace gas ash(BFA).The reduction processes for Zn-containing and Fe-containing oxides were analyzed in detail by using ther-modynamic equilibrium calculation and the principle of minimum free energy.The results showed that the main reaction in the system is the reduction of ZnFe_(2)_(4)and iron oxides.Over the full temperature range,iron oxides were more easily reduced than zinc oxides.Regardless of the amount of CO contained in the system,the reduction of ZnO to Zn was difficult to proceed below the boiling point(906℃)of Zn.When the reduction temperature is below 906℃,the reduction process of zinc ferrate was ZnFe_(2)_(4)→ZnO;when the reduction temperature is above 906℃,its reduction process becomed ZnFe_(2)_(4)→ZnO→Zn(g).The metallization and dezincification rates of the BFA gradually increased with increasing reaction temperature.As the C/O ratio increased,the metallization and dezincification rates first increased and then decreased.The effect of reduction time on BFA reduction was similar to that of reaction temperature.
基金financially supported by National Natural Science Foundation of China(Grant No.40973045)
文摘Tuite has been suggested as a potential reservoir for trace elements in the deep mantle,but no evidence confirms this supposition.By using a natural apatite as starting material,the trace-element-bearing tuite large crystals were obtained under highpressure and high-temperature conditions(15 GPa and 1800 K).X-ray diffraction pattern and Micro-Raman spectrum of the run product confirm that tuite was synthesized.The concentrations of trace elements in tuite crystals were analyzed by laser ablation-inductively coupled plasma-mass spectrometry(LA-ICP-MS).The rare earth element patterns of tuite show enrichment of light rare earth elements relative to heavy rare earth elements.Tuite shows high concentrations of Th and Sr,and negative anomalies of Rb,Nb,and Hf.The results show that tuite can accommodate a large amount of trace elements.Tuite might be an important host to accommodate trace elements if there is much apatite subducted into the deep mantle.
基金The authors gratefully acknowledge the research project from Engineering Research Center of Rock-Soil Drilling&Excavation and Protection,Ministry of EducationChina University of Geosciences,Wuhan(Grant No.202106).
文摘The sealing integrity of cement sheath in offshore wells is seriously threatened under high-temperature conditions,resulting in gas channeling and other problems.Given the lack of experimental results,in this study relevant samples of a cement slurry sealing section of a typical offshore high-temperature well have been prepared and analyzed.In particular,the mechanical properties have been assessed with a triaxial pressure servo instrument and a high-temperature curing kettle.The density and the Poisson’s ratio of the samples have also been tested.The stress-strain curve has been drawn to obtain the elastic modulus and the compressive strength.The rock brittleness index has been calculated according to the measured elastic modulus and the Poisson’s ratio,together with the brittleness and the compressibility of the cement samples.The test results show that the mechanical properties and bonding strength of the cement samples are optimal at 130°C,medium at 150°C,and poor at 180°C.
文摘Valve-regulated-lead-acid (VRLA) battery charging performed in high-temperature environments is extremely risky under overcharge conditions, and may lead to a subsequent thermal runaway. A new pressure-controlled charging method was adopted and the charging characteristics of the pressure-controlled VRLA battery in high-temperature environments were ex-perimentally studied. The concept was tested in a large temperature gradient to obtain more details about the effects of users' accustomed charging and discharging modes on battery capacity. The premature capacity loss (PCL) phenomenon under high temperature exposure was analyzed. The results showed that the capacity loss could be recovered by charging using a large current.
文摘This experiment is to study the special resistant induced by the high-speed evaporation surrounding themoving high-temperature particles. An observable equipment was designed, in which the first 11 experiments wereperformed by pouring one or several Zirconia spheres with various high-temperature and a diameter of 3～ 10 mminto a water pool. The particles falling-down speeds were recorded by high-speed photographic instrumentation,and pressures and water temperatures were measured. A comparison between the experiments with cold and hotspheres respectively, employing three different sphere types each, was presented. The experimental data, com-pared with the theory of the evaporation drag model, are nearly identical.
文摘High-temperature circulating fans blow 800 ℃ HN protective atmosphere to the surface of the strip as a jet heating power source or suspending source,playing a core role in metal strip continuous annealing furnaces. In this study,several high-temperature alloys were experimentally compared based on their high-temperature mechanical properties,high-temperature creep resistance,and high-temperature oxidation resistance. The results indicate that though the price of HR-120 alloy is only half of Inconel 601,it is suitable for the manufacture of fans that can withstand a high temperature of 800 ℃ given its good creep resistance,high-temperature oxidation resistance,and price advantage.
