High-temperature piezoelectric sen-sors are very important in severe environments such as fire safety,aerospace and oil drills,however,most current sensors are not heat res-istant(<300℃)and are fragile,which limit...High-temperature piezoelectric sen-sors are very important in severe environments such as fire safety,aerospace and oil drills,however,most current sensors are not heat res-istant(<300℃)and are fragile,which limits their use,especially in high-temperature environ-ments.A high-temperature resistant flexible piezoelectric film based on graphene oxide(GO)/polyacrylonitrile(PAN)composites was prepared by electrospinning and thermal treat-ment.It was packed into a micro-device,which could work continuously at 500℃.The intro-duction of GO significantly increased the mechanical properties of the PAN nanofibers because the oxygen-containing func-tional groups(electronegative groups)on the surface of the GO initiated a nucleophilic attack on the PAN molecule during heat treatment,enabling the GO to initiate the cyclization of the PAN at lower heat-treatment temperatures.In addition,the abund-ant oxygen-containing functional groups on GO acted as pro-oxidants to hasten the oxidation of PAN during heat treatment.The effects of GO content and heat treatment temperature on the properties of the nanofiber films were investigated.A GO/PAN nanofiber piezoelectric sensor heat-treated at 300℃had a 9.10 V and 2.25μA peak output,which are respectively 101.3%and 78.6%higher than those of the untreated films.Cyclic testing over 5000 cycles at 350℃confirmed the stable out-put performance of the GO/PAN nanofiber piezoelectric sensor.Furthermore,a sensor heat-treated at 400℃had a sensitivity of 1.7 V/N,which is 83.5%higher than that of an untreated one.The results show that the prepared GO/PAN nanofiber piezo-electric sensor combines high temperature resistance,high flexibility,stability and high sensitivity,and may have broad applic-ations in high temperature environments such as the aerospace and petroleum industries.展开更多
In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying（APS） techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy（SEM）, transm...In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying（APS） techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, X-ray diffraction（XRD）, and atomic force microscopy（AFM） were used to investigate the phases and microstructure of the as-sprayed, APS-deposited Co Ni Cr Al Y bond-coatings. The aim of this work was to study the suitability of the bond-coat materials for high temperature applications. Confirmation of nanoscale grains of the γ/γ′-phase was obtained by TEM, high-resolution TEM, and AFM. We concluded that these changes result from the plastic deformation of the bond-coat during the deposition, resulting in Co Ni Cr Al Y bond-coatings with excellent thermal cyclic resistance suitable for use in high-temperature applications. Cyclic oxidative stability was observed to also depend on the underlying metallic alloy substrate.展开更多
In this paper, a novel antenna is proposed for high-temperature testing, which can make the high-temperature pressure characteristics of a wireless passive ceramic pressure sensor demonstrated at up to a temperature o...In this paper, a novel antenna is proposed for high-temperature testing, which can make the high-temperature pressure characteristics of a wireless passive ceramic pressure sensor demonstrated at up to a temperature of 600℃. The design parameters of the antenna are similar to those of the sensor, which will increase the coupling strength between the sensor and testing antenna. The antenna is fabricated in thick film integrated technology, and the properties of the alumina ceramic and silver ensure the feasibility of the antenna in high-temperature environments. The sensor, coupled with the ceramic antenna, is investigated using a high-temperature pressure testing platform. The experimental measurement results show that the pressure signal in a harsh environment can be detected by the frequency diversity of the sensor.展开更多
High-temperature industries,as the primary consumers of energy,are greatly concerned with energy savings.Designing refractory linings with low thermal conductivity to reduce heat dissipation through high-temperature f...High-temperature industries,as the primary consumers of energy,are greatly concerned with energy savings.Designing refractory linings with low thermal conductivity to reduce heat dissipation through high-temperature furnace linings is a critical concern.In this study,a series of novel entropy-stabilized spinel materials are reported,and their potential applications in high-temperature industries are investigated.XRD and TEM results indicate that all materials possess a cubic spinel crystal structure with the■space group.Furthermore,these materials exhibit good phase stability at high temperatures.All entropy-stabilized spinel aggregates demonstrated high refractoriness(>1800℃)and a high load softening temperature(>1700℃).The impact of configurational entropy on the properties of entropy-stabilized spinel materials was also studied.As configurational entropy increased,the thermal conductivity of the entropy-stabilized spinel decreased,while slag corrosion resistance deteriorated.For the entropy-stabilized spinel with a configurational entropy value of 1.126R,it showed good high-temperature stability,reliable resistance to slag attack,and a low thermal conductivity of 2.776 W·m^(-1)·K^(-1)at 1000℃.展开更多
With the rapid advancement of science and technology,along with an increasing global focus on space exploration,there is a growing concern for addressing friction and wear issues in surface coatings for components ope...With the rapid advancement of science and technology,along with an increasing global focus on space exploration,there is a growing concern for addressing friction and wear issues in surface coatings for components operating in high-temperature environments within the aerospace sector.However,typical high-temperature coatings currently face challenges in effectively integrating excellent oxidation resistance,wear resistance,and lubrication properties in high-temperature settings.Studies have demonstrated the significant potential of Transition Metal Dichalcogenides(TMDCs)as lubricant additives in high-temperature lubrication,attributable to their distinctive crystal structures.Thus,this review concentrates on the compositional design of individual MX_(2)-type(M=W,Mo,Nb,Ta;X=S,Se)TMDCs(molybdenum disulfide(MoS_(2)),tungsten disulfide(WS2),niobium diselenide(NbSe_(2)),molybdenum diselenide(MoSe_(2)),tungsten diselenide(WSe_(2)))and their composites,including inorganic oxygen-containing sulfides,and explores the utilization of TMDCs in self-lubricating coatings.Furthermore,conventional preparation methods(mechanical exfoliation,liquid-phase ultrasonic exfoliation,chemical vapour deposition)for synthesizing TMDCs are outlined.Finally,an analysis of the lubrication mechanism of MX_(2)-type TMDCs is provided,along with future directions for enhancing the high-temperature lubrication performance of composite coatings.展开更多
High-temperature confocal scanning laser microscopy(HT-CSLM)is a potent methodology for investigating various phenomena in the field of metallurgy.Initially applied to the observation of solid phase transformations an...High-temperature confocal scanning laser microscopy(HT-CSLM)is a potent methodology for investigating various phenomena in the field of metallurgy.Initially applied to the observation of solid phase transformations and solidification,this method has gained traction in the field of non-metallic inclusion in steels in recent years.An overview of the experimental capabilities of HT-CSLM and the most important results of recent investigations regarding the topics of clean steel production are provided.It includes the formation of intragranular acicular ferrite(IAF)from the surface of non-metallic inclusions during the continuous cooling and heat treatment,which can be especially beneficial in the toughness of heat-affected zones of welded pieces.Furthermore,the investigation of agglomeration mechanisms of non-metallic inclusions(NMIs)in liquid steel is discussed to improve the insight into attraction forces between particles and clogging phenomena during continuous casting.Also,the dissolution of NMIs in various steelmaking slags can be observed by HT-CSLM to compare dissolution rates and mechanisms of NMI,where significant influences of temperature and chemical composition of the slag were shown.Last but not least,the experimental work regarding the interface between steel and slag is discussed,where novel techniques are currently being developed.A comprehensive summary of experimental techniques using HT-CSLM equipment to investigate different interactions of NMIs with steel and slag phases is compiled.展开更多
To understand the applicability of high-temperature preformed particle gel(HT-PPG)for control of short-circuiting in enhanced geothermal systems(EGSs),core flooding experiments were conducted on fractured granite core...To understand the applicability of high-temperature preformed particle gel(HT-PPG)for control of short-circuiting in enhanced geothermal systems(EGSs),core flooding experiments were conducted on fractured granite cores under varying fracture widths,gel particle sizes and swelling ratios.Key parameters such as injection pressure,water breakthrough pressure,and residual resistance factor were measured to evaluate HT-PPG performance.The gel exhibited strong injectability,entering granite fractures at pressure gradients as low as 0.656 MPa/m;HT-PPG yields a superior sealing performance by significantly reducing the permeability;and dehydration occurs during HT-PPG propagation,with a dehydration ratio ranging from 4.71%to 11.36%.This study reveals that HT-PPG can be injected into geothermal formations with minimal pressure yet provides strong resistance to breakthrough once in place.This balance of injectability and sealing strength makes HT-PPG effective for addressing thermal short-circuiting in EGS reservoirs.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
Metal halides have attracted worldwide attention as exceptional optoelectronic materials.Over the past decade,research on metal halides has yielded remarkable progress,and their color-conversion applications have show...Metal halides have attracted worldwide attention as exceptional optoelectronic materials.Over the past decade,research on metal halides has yielded remarkable progress,and their color-conversion applications have shown considerable promise for commercialization.With the reporting of self-trapped exciton(STE)emission in perovskites,the application of metal halides as broadband emitting materials in the lighting field has gained increas-ing interest.Herein,we provide a comprehensive review of metal halide STE emitters,especially for lighting applications.We begin with highlighting the ideal spectral characteristics and corresponding performance metrics for lighting.This is followed by a systematic summary of the mechanisms,optimization strategies,and recent advances of STE emission in metal halides.Finally,we outline the major challenges and prospective trends for metal halide STE emitters.This review aims to offer valuable insights into metal halide STE emitters and their lighting applications for facilitating the future commercialization.展开更多
A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)t...A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
Whole Slide Imaging (WSI) technology, as a revolutionary digital technology in the field of pathology, is gradually changing the traditional clinical pathological diagnosis model. By converting traditional glass patho...Whole Slide Imaging (WSI) technology, as a revolutionary digital technology in the field of pathology, is gradually changing the traditional clinical pathological diagnosis model. By converting traditional glass pathological sections into complete digital images through high-resolution scanning, it provides a new method for pathological diagnosis. Based on this, this paper studies the application of WSI technology in clinical pathological diagnosis, elaborates on its application value, analyzes the current application status, and proposes corresponding application countermeasures, aiming to provide reference for the standardized and popularized development of this technology in clinical pathological diagnosis.展开更多
Environmental DNA(eDNA)technology has revolutionized biodiversity monitoring with its non-invasive,sensitive,and cost-efficient approach.This paper systematically reviews eDNA advancements,examining its applications i...Environmental DNA(eDNA)technology has revolutionized biodiversity monitoring with its non-invasive,sensitive,and cost-efficient approach.This paper systematically reviews eDNA advancements,examining its applications in aquatic and terrestrial ecosystems and assessing China’s standardization progress.It delineates four developmental phases from single-species detection to high-throughput sequencing,and highlights China’s contribution to the development of technical standards.While significant progress has been made,challenges persist in quantitative accuracy,methodological consistency,and large-scale implementation.Future efforts should prioritize enhanced standardization,improved quantification techniques,broader applications,and international collaboration to drive innovation in eDNA technology.展开更多
Lignin,the most abundant natural aromatic polymer globally,has garnered considerable interest due to its rich and diverse active functional groups and its antioxidant,antimicrobial,and adhesive properties.Recent resea...Lignin,the most abundant natural aromatic polymer globally,has garnered considerable interest due to its rich and diverse active functional groups and its antioxidant,antimicrobial,and adhesive properties.Recent research has significantly improved the performance of lignin-based hydrogels,suggesting their substantial potential in fields such as biomedicine,environmental science,and agriculture.This paper reviews the process of lignin extraction,systematically introduces synthesis strategies for preparing lignin-based hydrogels,and discusses the current state of research on these hydrogels in biomedical and environmental protection fields.It concludes by identifying the existing challenges in lignin hydrogel research and envisioning future prospects and development trends.展开更多
Biomass is a resourcewhose organic carbon is formed from atmospheric carbon dioxide.It has numerous characteristics such as low carbon emissions,renewability,and environmental friendliness.The efficient utilization of...Biomass is a resourcewhose organic carbon is formed from atmospheric carbon dioxide.It has numerous characteristics such as low carbon emissions,renewability,and environmental friendliness.The efficient utilization of biomass plays a significant role in promoting the development of clean energy,alleviating environmental pressures,and achieving carbon neutrality goals.Among the numerous processing technologies of biomass,hydrothermal carbonization(HTC)is a promising thermochemical process that can decompose and convert biomass into hydrochar under relatively mild conditions of approximately 180℃–300℃,thereby enabling its efficient resource utilization.In addition,HTC can directly process feedstocks with high moisture content without the need for high-temperature drying,resulting in lower energy consumption.Based on a systematic analysis of the critical articles mainly published in 2011-2025 related to biomass,HTC,and hydrochar applications,in this review,the category of biomass was first classified and the chemical compositions were summarized.Then,the main chemical reaction pathways involved in biomass decomposition and transformation during the HTC process were introduced.Meanwhile,the roles of key process parameters,including reaction temperature,residence time,pH,feedstock type,pressure,mass ratio of biomass to water,and the use of catalysts on HTC,were carefully discussed.Finally,the applications of hydrochar in energy utilization,environmental remediation,soil improvement,adsorbent,microbial fermentation,and phosphorus recovery fields were highlighted.The future directions of the HTC process were also provided,which would respond to climate change by promoting the development of the sustainable carbon materials field.展开更多
The genus Actinidia is primarily functionally dioecious,and early sex identification plays a crucial role in improving breeding efficiency and reducing production costs.In this study,the accuracy of three sex-linked m...The genus Actinidia is primarily functionally dioecious,and early sex identification plays a crucial role in improving breeding efficiency and reducing production costs.In this study,the accuracy of three sex-linked molecular markers(SyGI[Shy Girl],FrBy[Friendly Boy],and SmY1)in sex identification was evaluated in various Actinidia species.The selected marker products were subsequently cloned and sequenced in six wild Actinidia species.Ninety-six wild A.chinensis chinensis accessions and 74 A.chinensis deliciosa accessions,most of which were wild,with only one cultivated,were used for comprehensive primer validation.Thirty-three juvenile A.chinensis chinensis hybrid seedlings were used for practical application tests.The results showed that the marker SyGI accurately identified the sex of 20 samples from six Actinidia species and 96 A.chinensis chinensis accessions with 100%reliability.For Actinidia chinensis deliciosa,the identification accuracy reached 98.65%.Sequence analysis revealed that SyGI shared the highest similarity with the male-specific genomic region.Furthermore,SyGI achieved 100%accuracy in identifying the sex of 33 juvenile A.chinensis chinensis individuals.The findings confirm that the SyGI marker possesses high accuracy,strong specificity,and broad applicability,making it a valuable tool for kiwifruit breeding programs.The cloned sequences from wild Actinidia species also provide important references for future research on the mechanisms of sexual evolution and determination.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
Graphitic carbon nitride(g-CN)stands out as the most promising candidate for solar energy conversion owing to its easy preparation,metal-free nature,flexible molecular structure,moderate bandgap,and excellent thermal/...Graphitic carbon nitride(g-CN)stands out as the most promising candidate for solar energy conversion owing to its easy preparation,metal-free nature,flexible molecular structure,moderate bandgap,and excellent thermal/chemical stability.To enhance the performance of intrinsic g-CN,a supramolecular self-assembly strategy has been proposed to regulate the molecular structure of supramolecular precursors through non-covalent interactions across molecular building blocks,thereby optimizing the electronic structure of g-CN.This review provides a comprehensive overview of the recent progress in supramolecular self-assembly-derived graphitic carbon nitride(SM-CN)from both experimental and theoretical computational research in synthesis strategies,including synthesis methods and influencing factors,providing a theoretical foundation for the design of supramolecular assembly.It also discusses modification strategies,such as internal modification of the conjugated plane,interlayer optimization,and construction of heterointerfaces to improve the electronic structure of SM-CN owing to its unique layered structure.This review further summarizes the applications of SM-CN in environment and energy,including wastewater treatment,sterilization and disinfection/air purification,water splitting,H_(2)O_(2)production,organic synthesis/biomass conversion,CO_(2)reduction,photocatalytic coupling technology.Finally,perspectives and outlooks for the future development of SM-CN aim to inspire further innovation in the design and construction of high-performance SM-CN for broader applications.展开更多
The escalating global crisis of antibiotic resistance necessitates urgent development of novel antimicrobial agents.In this context,antimicrobial peptides(AMPs)derived from fish emerge as a highly promising strategic ...The escalating global crisis of antibiotic resistance necessitates urgent development of novel antimicrobial agents.In this context,antimicrobial peptides(AMPs)derived from fish emerge as a highly promising strategic resource,owing to their unique structural diversity and the exceptional adaptability and tolerance conferred by evolutionary pressures in aquatic environments.This review systematically synthesizes key advances in fish-derived AMP research.It details their diverse sourcing avenues,encompassing tissues from live fish(e.g.,skin,mucus,gills,intestines)and processing byproducts(e.g.,scales,skins,viscera).The discussion covers efficient isolation,purification,and synthesis strategies,and critically examines their defining feature:unique multi-target synergistic antimicrobial mechanisms(including microbial membrane disruption,intracellular targeting,and immunomodulation),which contribute to a reduced propensity for resistance development.To address inherent limitations of natural AMPs(such as susceptibility to proteolysis and potential toxicity),the review highlights innovative optimization approaches,including computational-aided rational design,amino acid modification,cyclization,and hybrid peptide construction.Furthermore,the review elaborates on their significant application potential across crucial domains:food preservation(inhibiting spoilage organisms,extending shelf-life),sustainable aquaculture(as antibiotic alternatives,enhancing disease resistance,improving water quality),and the development of novel anti-infective therapeutics(particularly against drug-resistant infections).Therefore,this work aims to provide a comprehensive theoretical foundation and innovative strategic insights to foster in-depth research and the sustainable exploitation of this vital strategic biological resource.展开更多
In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved cerami...In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.展开更多
文摘High-temperature piezoelectric sen-sors are very important in severe environments such as fire safety,aerospace and oil drills,however,most current sensors are not heat res-istant(<300℃)and are fragile,which limits their use,especially in high-temperature environ-ments.A high-temperature resistant flexible piezoelectric film based on graphene oxide(GO)/polyacrylonitrile(PAN)composites was prepared by electrospinning and thermal treat-ment.It was packed into a micro-device,which could work continuously at 500℃.The intro-duction of GO significantly increased the mechanical properties of the PAN nanofibers because the oxygen-containing func-tional groups(electronegative groups)on the surface of the GO initiated a nucleophilic attack on the PAN molecule during heat treatment,enabling the GO to initiate the cyclization of the PAN at lower heat-treatment temperatures.In addition,the abund-ant oxygen-containing functional groups on GO acted as pro-oxidants to hasten the oxidation of PAN during heat treatment.The effects of GO content and heat treatment temperature on the properties of the nanofiber films were investigated.A GO/PAN nanofiber piezoelectric sensor heat-treated at 300℃had a 9.10 V and 2.25μA peak output,which are respectively 101.3%and 78.6%higher than those of the untreated films.Cyclic testing over 5000 cycles at 350℃confirmed the stable out-put performance of the GO/PAN nanofiber piezoelectric sensor.Furthermore,a sensor heat-treated at 400℃had a sensitivity of 1.7 V/N,which is 83.5%higher than that of an untreated one.The results show that the prepared GO/PAN nanofiber piezo-electric sensor combines high temperature resistance,high flexibility,stability and high sensitivity,and may have broad applic-ations in high temperature environments such as the aerospace and petroleum industries.
基金provided by Technical Education Quality Improvement Programme-Ⅱ(TEQIP-Ⅱ)at MNNIT Allahabad
文摘In the present study, bond-coats for thermal barrier coatings were deposited via air plasma spraying（APS） techniques onto Inconel 800 and Hastelloy C-276 alloy substrates. Scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, X-ray diffraction（XRD）, and atomic force microscopy（AFM） were used to investigate the phases and microstructure of the as-sprayed, APS-deposited Co Ni Cr Al Y bond-coatings. The aim of this work was to study the suitability of the bond-coat materials for high temperature applications. Confirmation of nanoscale grains of the γ/γ′-phase was obtained by TEM, high-resolution TEM, and AFM. We concluded that these changes result from the plastic deformation of the bond-coat during the deposition, resulting in Co Ni Cr Al Y bond-coatings with excellent thermal cyclic resistance suitable for use in high-temperature applications. Cyclic oxidative stability was observed to also depend on the underlying metallic alloy substrate.
基金Project supported by the National Natural Science Foundation for Distinguished Young Scholars,China(Grant No.51425505)the National Natural Science Foundation of China(Grant No.61471324)+1 种基金the Program for the Outstanding Innovative Teams of Higher Learning Institutions of Shanxi Province,China(Grant No.2013-077)the Graduate Students Outstanding Innovation Project of Shanxi Province,China(Grant No.20143020)
文摘In this paper, a novel antenna is proposed for high-temperature testing, which can make the high-temperature pressure characteristics of a wireless passive ceramic pressure sensor demonstrated at up to a temperature of 600℃. The design parameters of the antenna are similar to those of the sensor, which will increase the coupling strength between the sensor and testing antenna. The antenna is fabricated in thick film integrated technology, and the properties of the alumina ceramic and silver ensure the feasibility of the antenna in high-temperature environments. The sensor, coupled with the ceramic antenna, is investigated using a high-temperature pressure testing platform. The experimental measurement results show that the pressure signal in a harsh environment can be detected by the frequency diversity of the sensor.
基金financially supported by the National Natural Science Foundation of China(Nos.52472032 and 52172023)the Key Program of Natural Science Foundation of Hubei Province(No.2024AFA083)
文摘High-temperature industries,as the primary consumers of energy,are greatly concerned with energy savings.Designing refractory linings with low thermal conductivity to reduce heat dissipation through high-temperature furnace linings is a critical concern.In this study,a series of novel entropy-stabilized spinel materials are reported,and their potential applications in high-temperature industries are investigated.XRD and TEM results indicate that all materials possess a cubic spinel crystal structure with the■space group.Furthermore,these materials exhibit good phase stability at high temperatures.All entropy-stabilized spinel aggregates demonstrated high refractoriness(>1800℃)and a high load softening temperature(>1700℃).The impact of configurational entropy on the properties of entropy-stabilized spinel materials was also studied.As configurational entropy increased,the thermal conductivity of the entropy-stabilized spinel decreased,while slag corrosion resistance deteriorated.For the entropy-stabilized spinel with a configurational entropy value of 1.126R,it showed good high-temperature stability,reliable resistance to slag attack,and a low thermal conductivity of 2.776 W·m^(-1)·K^(-1)at 1000℃.
文摘With the rapid advancement of science and technology,along with an increasing global focus on space exploration,there is a growing concern for addressing friction and wear issues in surface coatings for components operating in high-temperature environments within the aerospace sector.However,typical high-temperature coatings currently face challenges in effectively integrating excellent oxidation resistance,wear resistance,and lubrication properties in high-temperature settings.Studies have demonstrated the significant potential of Transition Metal Dichalcogenides(TMDCs)as lubricant additives in high-temperature lubrication,attributable to their distinctive crystal structures.Thus,this review concentrates on the compositional design of individual MX_(2)-type(M=W,Mo,Nb,Ta;X=S,Se)TMDCs(molybdenum disulfide(MoS_(2)),tungsten disulfide(WS2),niobium diselenide(NbSe_(2)),molybdenum diselenide(MoSe_(2)),tungsten diselenide(WSe_(2)))and their composites,including inorganic oxygen-containing sulfides,and explores the utilization of TMDCs in self-lubricating coatings.Furthermore,conventional preparation methods(mechanical exfoliation,liquid-phase ultrasonic exfoliation,chemical vapour deposition)for synthesizing TMDCs are outlined.Finally,an analysis of the lubrication mechanism of MX_(2)-type TMDCs is provided,along with future directions for enhancing the high-temperature lubrication performance of composite coatings.
基金the Association SSF Strategic Mobility Grant(No.SM22-0039)theÅForsk Foundation(No.23-540)for supporting the research regarding inclusion engineering.
文摘High-temperature confocal scanning laser microscopy(HT-CSLM)is a potent methodology for investigating various phenomena in the field of metallurgy.Initially applied to the observation of solid phase transformations and solidification,this method has gained traction in the field of non-metallic inclusion in steels in recent years.An overview of the experimental capabilities of HT-CSLM and the most important results of recent investigations regarding the topics of clean steel production are provided.It includes the formation of intragranular acicular ferrite(IAF)from the surface of non-metallic inclusions during the continuous cooling and heat treatment,which can be especially beneficial in the toughness of heat-affected zones of welded pieces.Furthermore,the investigation of agglomeration mechanisms of non-metallic inclusions(NMIs)in liquid steel is discussed to improve the insight into attraction forces between particles and clogging phenomena during continuous casting.Also,the dissolution of NMIs in various steelmaking slags can be observed by HT-CSLM to compare dissolution rates and mechanisms of NMI,where significant influences of temperature and chemical composition of the slag were shown.Last but not least,the experimental work regarding the interface between steel and slag is discussed,where novel techniques are currently being developed.A comprehensive summary of experimental techniques using HT-CSLM equipment to investigate different interactions of NMIs with steel and slag phases is compiled.
基金Supported by the U.S.Department of Energy’s Office of Energy Efficiency and Renewable Energy(EERE)under the Geothermal Technologies Office(GTO)“Innovative Methods to Control Hydraulic Properties of Enhanced Geothermal Systems”(DE-EE0009790).
文摘To understand the applicability of high-temperature preformed particle gel(HT-PPG)for control of short-circuiting in enhanced geothermal systems(EGSs),core flooding experiments were conducted on fractured granite cores under varying fracture widths,gel particle sizes and swelling ratios.Key parameters such as injection pressure,water breakthrough pressure,and residual resistance factor were measured to evaluate HT-PPG performance.The gel exhibited strong injectability,entering granite fractures at pressure gradients as low as 0.656 MPa/m;HT-PPG yields a superior sealing performance by significantly reducing the permeability;and dehydration occurs during HT-PPG propagation,with a dehydration ratio ranging from 4.71%to 11.36%.This study reveals that HT-PPG can be injected into geothermal formations with minimal pressure yet provides strong resistance to breakthrough once in place.This balance of injectability and sealing strength makes HT-PPG effective for addressing thermal short-circuiting in EGS reservoirs.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
文摘Metal halides have attracted worldwide attention as exceptional optoelectronic materials.Over the past decade,research on metal halides has yielded remarkable progress,and their color-conversion applications have shown considerable promise for commercialization.With the reporting of self-trapped exciton(STE)emission in perovskites,the application of metal halides as broadband emitting materials in the lighting field has gained increas-ing interest.Herein,we provide a comprehensive review of metal halide STE emitters,especially for lighting applications.We begin with highlighting the ideal spectral characteristics and corresponding performance metrics for lighting.This is followed by a systematic summary of the mechanisms,optimization strategies,and recent advances of STE emission in metal halides.Finally,we outline the major challenges and prospective trends for metal halide STE emitters.This review aims to offer valuable insights into metal halide STE emitters and their lighting applications for facilitating the future commercialization.
基金provided by the National Natural Science Foundation of China(NSFC)through the Joint Fund Project(No.U24A202815)the Youth Science Fund Project(No.52302031).
文摘A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
文摘Whole Slide Imaging (WSI) technology, as a revolutionary digital technology in the field of pathology, is gradually changing the traditional clinical pathological diagnosis model. By converting traditional glass pathological sections into complete digital images through high-resolution scanning, it provides a new method for pathological diagnosis. Based on this, this paper studies the application of WSI technology in clinical pathological diagnosis, elaborates on its application value, analyzes the current application status, and proposes corresponding application countermeasures, aiming to provide reference for the standardized and popularized development of this technology in clinical pathological diagnosis.
基金supported by the National Natural Science Foundation of China(Grant No.32160172)the Key Science-Technology Project of Inner Mongolia(2023KYPT0010)+1 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region of China(Grant No.2025QN03006)the 2023 Inner Mongolia Public Institution High-Level Talent Introduction Scientific Research Support Project.
文摘Environmental DNA(eDNA)technology has revolutionized biodiversity monitoring with its non-invasive,sensitive,and cost-efficient approach.This paper systematically reviews eDNA advancements,examining its applications in aquatic and terrestrial ecosystems and assessing China’s standardization progress.It delineates four developmental phases from single-species detection to high-throughput sequencing,and highlights China’s contribution to the development of technical standards.While significant progress has been made,challenges persist in quantitative accuracy,methodological consistency,and large-scale implementation.Future efforts should prioritize enhanced standardization,improved quantification techniques,broader applications,and international collaboration to drive innovation in eDNA technology.
基金supported by the National Natural Science Foundation of China(21706052,22278114)Natural Science Foundation of Henan Province(242300421575).
文摘Lignin,the most abundant natural aromatic polymer globally,has garnered considerable interest due to its rich and diverse active functional groups and its antioxidant,antimicrobial,and adhesive properties.Recent research has significantly improved the performance of lignin-based hydrogels,suggesting their substantial potential in fields such as biomedicine,environmental science,and agriculture.This paper reviews the process of lignin extraction,systematically introduces synthesis strategies for preparing lignin-based hydrogels,and discusses the current state of research on these hydrogels in biomedical and environmental protection fields.It concludes by identifying the existing challenges in lignin hydrogel research and envisioning future prospects and development trends.
基金supported by National Natural Science Foundation of China(22578155,22478147)the Natural Science Foundation of Huaian City(HAB2024051).
文摘Biomass is a resourcewhose organic carbon is formed from atmospheric carbon dioxide.It has numerous characteristics such as low carbon emissions,renewability,and environmental friendliness.The efficient utilization of biomass plays a significant role in promoting the development of clean energy,alleviating environmental pressures,and achieving carbon neutrality goals.Among the numerous processing technologies of biomass,hydrothermal carbonization(HTC)is a promising thermochemical process that can decompose and convert biomass into hydrochar under relatively mild conditions of approximately 180℃–300℃,thereby enabling its efficient resource utilization.In addition,HTC can directly process feedstocks with high moisture content without the need for high-temperature drying,resulting in lower energy consumption.Based on a systematic analysis of the critical articles mainly published in 2011-2025 related to biomass,HTC,and hydrochar applications,in this review,the category of biomass was first classified and the chemical compositions were summarized.Then,the main chemical reaction pathways involved in biomass decomposition and transformation during the HTC process were introduced.Meanwhile,the roles of key process parameters,including reaction temperature,residence time,pH,feedstock type,pressure,mass ratio of biomass to water,and the use of catalysts on HTC,were carefully discussed.Finally,the applications of hydrochar in energy utilization,environmental remediation,soil improvement,adsorbent,microbial fermentation,and phosphorus recovery fields were highlighted.The future directions of the HTC process were also provided,which would respond to climate change by promoting the development of the sustainable carbon materials field.
基金funded by Sichuan Science and Technology Program,grant numbers 2021YFYZ0010,2023YFH0006,2025YFHZ0295The Basic Research Program of Sichuan Provincial Research Institutes,grant numbers 2024JDKY0001 and 2023JDKY0001.
文摘The genus Actinidia is primarily functionally dioecious,and early sex identification plays a crucial role in improving breeding efficiency and reducing production costs.In this study,the accuracy of three sex-linked molecular markers(SyGI[Shy Girl],FrBy[Friendly Boy],and SmY1)in sex identification was evaluated in various Actinidia species.The selected marker products were subsequently cloned and sequenced in six wild Actinidia species.Ninety-six wild A.chinensis chinensis accessions and 74 A.chinensis deliciosa accessions,most of which were wild,with only one cultivated,were used for comprehensive primer validation.Thirty-three juvenile A.chinensis chinensis hybrid seedlings were used for practical application tests.The results showed that the marker SyGI accurately identified the sex of 20 samples from six Actinidia species and 96 A.chinensis chinensis accessions with 100%reliability.For Actinidia chinensis deliciosa,the identification accuracy reached 98.65%.Sequence analysis revealed that SyGI shared the highest similarity with the male-specific genomic region.Furthermore,SyGI achieved 100%accuracy in identifying the sex of 33 juvenile A.chinensis chinensis individuals.The findings confirm that the SyGI marker possesses high accuracy,strong specificity,and broad applicability,making it a valuable tool for kiwifruit breeding programs.The cloned sequences from wild Actinidia species also provide important references for future research on the mechanisms of sexual evolution and determination.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金supported by the National Natural Science Foundation of China(NSFC No.52271228)the Natural Science Foundation of Shaanxi Province(No.2023-JC-ZD-21)the Doctoral Dissertation Innovation Fund of Xi'an University of Technology(No.101-252072301)。
文摘Graphitic carbon nitride(g-CN)stands out as the most promising candidate for solar energy conversion owing to its easy preparation,metal-free nature,flexible molecular structure,moderate bandgap,and excellent thermal/chemical stability.To enhance the performance of intrinsic g-CN,a supramolecular self-assembly strategy has been proposed to regulate the molecular structure of supramolecular precursors through non-covalent interactions across molecular building blocks,thereby optimizing the electronic structure of g-CN.This review provides a comprehensive overview of the recent progress in supramolecular self-assembly-derived graphitic carbon nitride(SM-CN)from both experimental and theoretical computational research in synthesis strategies,including synthesis methods and influencing factors,providing a theoretical foundation for the design of supramolecular assembly.It also discusses modification strategies,such as internal modification of the conjugated plane,interlayer optimization,and construction of heterointerfaces to improve the electronic structure of SM-CN owing to its unique layered structure.This review further summarizes the applications of SM-CN in environment and energy,including wastewater treatment,sterilization and disinfection/air purification,water splitting,H_(2)O_(2)production,organic synthesis/biomass conversion,CO_(2)reduction,photocatalytic coupling technology.Finally,perspectives and outlooks for the future development of SM-CN aim to inspire further innovation in the design and construction of high-performance SM-CN for broader applications.
文摘The escalating global crisis of antibiotic resistance necessitates urgent development of novel antimicrobial agents.In this context,antimicrobial peptides(AMPs)derived from fish emerge as a highly promising strategic resource,owing to their unique structural diversity and the exceptional adaptability and tolerance conferred by evolutionary pressures in aquatic environments.This review systematically synthesizes key advances in fish-derived AMP research.It details their diverse sourcing avenues,encompassing tissues from live fish(e.g.,skin,mucus,gills,intestines)and processing byproducts(e.g.,scales,skins,viscera).The discussion covers efficient isolation,purification,and synthesis strategies,and critically examines their defining feature:unique multi-target synergistic antimicrobial mechanisms(including microbial membrane disruption,intracellular targeting,and immunomodulation),which contribute to a reduced propensity for resistance development.To address inherent limitations of natural AMPs(such as susceptibility to proteolysis and potential toxicity),the review highlights innovative optimization approaches,including computational-aided rational design,amino acid modification,cyclization,and hybrid peptide construction.Furthermore,the review elaborates on their significant application potential across crucial domains:food preservation(inhibiting spoilage organisms,extending shelf-life),sustainable aquaculture(as antibiotic alternatives,enhancing disease resistance,improving water quality),and the development of novel anti-infective therapeutics(particularly against drug-resistant infections).Therefore,this work aims to provide a comprehensive theoretical foundation and innovative strategic insights to foster in-depth research and the sustainable exploitation of this vital strategic biological resource.
基金National Natural Science Foundation of China(No.U2241205)the Natural Science Basic Research Program of Shaanxi(Nos.2022JC-33,2023-GHZD-35,and 2024JC-ZDXM-25)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National 111 Project to provide fund for conducting experiments。
文摘In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.
