This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely re...This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely recognized AZ31 alloy in industry.Unlike the AZ31 alloy,which retains partially unrecrystallized grains,the high-speed-extruded BA56 alloy demonstrates a coarser but entirely recrystallized and more homogeneous microstructure.The fine-grained structure and abundant Mg_(3)Bi_(2) particles in the BA56 extrusion billet significantly enhance its DRX behavior,thus enabling rapid and complete recrystallization during extrusion.The BA56 alloy contains band-like fragmented Mg_(3)Bi_(2) particles and numerous fine Mg_(3)Bi_(2) particles distributed throughout the material,in contrast to the sparse Al_(8)Mn_(5) particles in the AZ31 alloy.These features contribute to superior mechanical properties of the BA56 alloy,which achieves tensile yield and ultimate tensile strengths of 205 and 292 MPa,respectively,compared to 196 and 270 MPa for the AZ31 alloy.The superior strength of the BA56 alloy,even with its coarser grain size,can be explained by its elevated Hall-Petch constant and the strengthening contribution from the fine Mg_(3)Bi_(2) particles.Additionally,the BA56 alloy demonstrates significant age-hardenability,achieving a 22%enhancement in hardness following T5 aging,attributed to the precipitation of nanoscale Mg_(3)Bi_(2) and Mg_(17)Al_(12) phases.By contrast,the AZ31 alloy shows minimal hardening due to the absence of precipitate formation during aging.These findings suggest that the BA56 alloy is a promising candidate for the production of extruded Mg components requiring a combination of high productivity,superior mechanical performance,and wide-ranging process adaptability.展开更多
Feature extraction in the optical domain offers a promising low-latency,high-throughput solution.Optical diffraction-based feature extraction operating under a coherent light source can further achieve parallel output...Feature extraction in the optical domain offers a promising low-latency,high-throughput solution.Optical diffraction-based feature extraction operating under a coherent light source can further achieve parallel outputs with low energy consumption.However,it presents significant challenges for maintaining the coherent input,scaling the operation rates beyond 10 GHz,and ensuring the effective extraction of functional configuration simultaneously.We propose an optical feature extraction engine(OFE^(2)),which is composed of a diffraction operator and a data preparation module,powering high-speed feature extraction for both image and temporal series tasks.This OFE^(2)can achieve a core latency of less than 250.5 ps;in addition,it can reach a throughput of 250 GOPS and an efficiency of 2.06 TOPS/W.Supported by the OFE^(2),a novel feature extraction paradigm is emerging,enabling high-speed,low-latency service access for applications in scene recognition,medical assistance,and digital finance.展开更多
Virtual coupling is a novel technology that enables trains to run closely together without physical connections through communication and automation systems.The paper addresses an adaptive polynomial approximation alg...Virtual coupling is a novel technology that enables trains to run closely together without physical connections through communication and automation systems.The paper addresses an adaptive polynomial approximation algorithm for the cooperative control of high-speed trains(HSTs)under virtual coupling.It aims to solve the cooperative tracking control problem of HST formation operations under various scenarios,including known and unknown parameters.To enable the HST formation system to achieve cooperative operation while ensuring an appropriate spacing distance,the tracking errors of displacement and speed throughout the entire operation converge to zero.The proposed control strategy focuses on adopting polynomial approximation to handle unknown parameters,which are estimated via adaptive laws.Additionally,the unknown parameters of the HSTs are estimated online through adaptive laws.Experimental results verify the effectiveness of this method.展开更多
This paper addresses the control design for automatic train operation of high-speed trains with protection constraints.A new resilient nonlinear gain-based feedback control approach is proposed,which is capable of gua...This paper addresses the control design for automatic train operation of high-speed trains with protection constraints.A new resilient nonlinear gain-based feedback control approach is proposed,which is capable of guaranteeing,under some proper non-restrictive initial conditions,the protection constraints control raised by the distance-to-go(moving authority)curve and automatic train protection in practice.A new hyperbolic tangent function-based model is presented to mimic the whole operation process of high-speed trains.The proposed feedback control methods are easily implementable and computationally inexpensive because the presence of only two feedback gains guarantee satisfactory tracking performance and closed-loop stability,no adaptations of unknown parameters,function approximation of unknown nonlinearities,and attenuation of external disturbances in the proposed control strategies.Finally,rigorous proofs and comparative simulation results are given to demonstrate the effectiveness of the proposed approaches.展开更多
Electric current heat treatment is an innovative technique to improve microstructures and mechanical properties of metallic materials.The microstructures and mechanical properties of a powder metallurgy high-speed ste...Electric current heat treatment is an innovative technique to improve microstructures and mechanical properties of metallic materials.The microstructures and mechanical properties of a powder metallurgy high-speed steel(PM-HSS)treated by electric current heat treatment and traditional heat treatment are comparatively investigated.Results showed that after austenitizing at 1130°C,the structure of PM-HSS sample composed of ferrite matrix,M_(6)C,M_(23)C_(6),and MC carbides,transformed into a martensite matrix accompanied by M_(6)C and MC carbides.Compared to the traditional austenitizing at 1130℃ for 30 min,the electric current austenitizing at 1130℃ for 5 min dissolved more carbides,resulting in a greater solid solution of alloying elements in the matrix.Further traditional triple tempering led to carbide coarsening,whereas electric current triple tempering promoted the carbide dissolution.Notably,the dissolution of more carbides resulted in a higher C content in the martensite matrix of HSS treated by electric current,significantly promoting the formation of nanotwins(5-20 nm in width).The electric current triple tempering sample exhibited a yield strength of 3097 MPa,compressive strength of 5016 MPa,and a fracture strain of 30.0%,outperforming the traditional triple tempering sample by nearly 600 MPa in yield strength.Analysis revealed that this significant strengthening was primarily attributed to nanotwin formation and solid solution strengthening caused by carbide dissolution.展开更多
The operational safety characteristics of trains exposed to a strong wind have caused great concern in recent years.In the present paper,the effect of the strong gust wind on a high-speed train is investigated.A typic...The operational safety characteristics of trains exposed to a strong wind have caused great concern in recent years.In the present paper,the effect of the strong gust wind on a high-speed train is investigated.A typical gust wind model for any wind angle,named“Chinese hat gust wind model”,was first constructed,and an algorithm for computing the aerodynamic loads was elaborated accordingly.A vehicle system dynamic model was then set up in order to investigate the vehicle system dynamic characteristics.The assessment of the operational safety has been conducted by means of characteristic wind curves(CWC).As some of the parameters of the wind-train system were difficult to measure,we also investigated the impact of the uncertain system parameters on the CWC.Results indicate that,the descending order of the operational safety index of the vehicle for each wind angle is 90°-60°-120°-30°-150°,and the worst condition for the operational safety occurs when the wind angle reaches around 90°.According to our findings,the gust factor and aerodynamic side force coefficient have great impact on the critical wind speed.Thus,these two parameters require special attention when considering the operational safety of a railway vehicle subjected to strong gust wind.展开更多
The characteristic wind curve （CWC） was com- monly used in the previous work to evaluate the operational safety of the high-speed trains exposed to crosswinds. How- ever, the CWC only provide the dividing line betwe...The characteristic wind curve （CWC） was com- monly used in the previous work to evaluate the operational safety of the high-speed trains exposed to crosswinds. How- ever, the CWC only provide the dividing line between safety state and failure state of high-speed trains, which can not evaluate the risk of derailment of high-speed trains when ex- posed to natural winds. In the present paper, a more realistic approach taking into account the stochastic characteristics of natural winds is proposed, which can give a reasonable and effective assessment of the operational safety of high-speed trains under stochastic winds. In this approach, the longitudi- nal and lateral components of stochastic winds are simulated based on the Cooper theory and harmonic superposition. An algorithm is set up for calculating the unsteady aerody- namic forces （moments） of the high-speed trains exposed to stochastic winds. A multi-body dynamic model of the rail vehicle is established to compute the vehicle system dynamic response subjected to the unsteady aerodynamic forces （mo- ments） input. Then the statistical method is used to get the mean characteristic wind curve （MCWC） and spread range of the high-speed trains exposed to stochastic winds. It is found that the CWC provided by the previous analyticalmethod produces over-conservative limits. The methodol- ogy proposed in the present paper can provide more signif- icant reference for the safety operation of high-speed trains exposed to stochastic winds.展开更多
Passengers’demands for riding comfort have been getting higher and higher as the high-speed railway develops.Scientific methods to analyze the interior noise of the high-speed train are needed and the operational tra...Passengers’demands for riding comfort have been getting higher and higher as the high-speed railway develops.Scientific methods to analyze the interior noise of the high-speed train are needed and the operational transfer path analysis(OTPA)method provides a theoretical basis and guidance for the noise control of the train and overcomes the shortcomings of the traditional method,which has high test efficiency and can be carried out during the working state of the targeted machine.The OTPA model is established from the aspects of“path reference point-target point”and“sound source reference point-target point”.As for the mechanism of the noise transmission path,an assumption is made that the direct sound propagation is ignored,and the symmetric sound source and the symmetric path are merged.Using the operational test data and the OTPA method,combined with the results of spherical array sound source identification,the path contribution and sound source contribution of the interior noise are analyzed,respectively,from aspects of the total value and spectrum.The results show that the OTPA conforms to the calculation results of the spherical array sound source identification.At low speed,the contribution of the floor path and the contribution of the bogie sources are dominant.When the speed is greater than 300 km/h,the contribution of the roof path is dominant.Moreover,for the carriage with a pantograph,the lifted pantograph is an obvious source.The noise from the exterior sources of the train transfer into the interior mainly through the form of structural excitation,and the contribution of air excitation is non-significant.Certain analyses of train parts provide guides for the interior noise control.展开更多
We study cooperation between the airline and high-speed rail(HSR) sectors by formulating their joint profit as a maximization problem using a multinomial logit choice model in a three-node setting. We allow the nonpur...We study cooperation between the airline and high-speed rail(HSR) sectors by formulating their joint profit as a maximization problem using a multinomial logit choice model in a three-node setting. We allow the nonpurchase option as an outside option available to consumers. The demand for each choice is not only a function of the price but also the service quality, such as the total trip time, frequency of service, and ease of connecting from the hub to a nearby HSR station. As a result, the following findings are presented. First, regardless of the service quality of either sector and the non-purchase option,cooperation decreases the total volume of the domestic market of a country. Second, when the attractiveness of the outside option is high, the HSR and air sectors can prevent a large reduction in the total volume by cooperation in the connecting market. However, this is not the case in the domestic market. Third, if the non-purchase quality in the domestic market is high, then cooperation increases the social welfare of the whole market. If the non-purchase quality is low, then cooperation increases the welfare of the whole market only in cases where the number of potential customers in the connecting market is relatively large. We also show the effect of improving air–rail service quality on each market share and on the total profit.展开更多
In order to solve the outstanding construction traffic safety problems of operating expressways in mountainous areas and improve the traffic safety guarantee ability and operation efficiency of expressways, this paper...In order to solve the outstanding construction traffic safety problems of operating expressways in mountainous areas and improve the traffic safety guarantee ability and operation efficiency of expressways, this paper, relying on G93 Yunwushan Tunnel Disease Remediation Project, investigates and analyzes the road characteristics, traffic characteristics and disease treatment of operating expressways, and comprehensively analyzes and evaluates the traffic safety control of road engineering maintenance projects based on the concept and method of operation safety, which is of great significance.展开更多
Present of wind power is sporadically and cannot be utilized as the only fundamental load of energy sources.This paper proposes a wind-solar hybrid energy storage system(HESS)to ensure a stable supply grid for a longe...Present of wind power is sporadically and cannot be utilized as the only fundamental load of energy sources.This paper proposes a wind-solar hybrid energy storage system(HESS)to ensure a stable supply grid for a longer period.A multi-objective genetic algorithm(MOGA)and state of charge(SOC)region division for the batteries are introduced to solve the objective function and configuration of the system capacity,respectively.MATLAB/Simulink was used for simulation test.The optimization results show that for a 0.5 MW wind power and 0.5 MW photovoltaic system,with a combination of a 300 Ah lithium battery,a 200 Ah lead-acid battery,and a water storage tank,the proposed strategy reduces the system construction cost by approximately 18,000 yuan.Additionally,the cycle count of the electrochemical energy storage systemincreases from4515 to 4660,while the depth of discharge decreases from 55.37%to 53.65%,achieving shallow charging and discharging,thereby extending battery life and reducing grid voltage fluctuations significantly.The proposed strategy is a guide for stabilizing the grid connection of wind and solar power generation,capability allocation,and energy management of energy conservation systems.展开更多
The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different...The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different RE additions were prepared on a horizontal centrifugal casting machine. The solidification process, eutectic structure transformation, carbide morphology, and the elements present, were all investigated by means of differential scanning calorimetry （DSC） and scanning electron microscopy energy dispersive spectrometry （SEM-EDS）. The energy produced by crack initiation and crack extension was analyzed using a digital impact test machine. It was found that rare earth elements increased the tensile strength of the steel by inducing crystallization of earlier eutectic γ-Fe during the solidification process, which in turn increased the solidification temperature and thinned the dendritic grains. Rare earth elements with large atomic radius changed the lattice parameters of the MC carbide by forming rare earth carbides. This had the effect of dispersing longpole M C carbides to provide carbide grains, thereby, reducing the formation of the gross carbide and making more V available, to increase the secondary hardening process and improve the hardness level. The presence of rare earth elements in the steel raised the impact toughness by changing the mechanism of MC carbide formation, thereby increasing the crack initiation energy.展开更多
A high-speed train-track coupling dynamic model is used to investigate the dynamic behavior of a high-speed train operating on a curved track with failed fasteners. The model considers a high-speed train consisting of...A high-speed train-track coupling dynamic model is used to investigate the dynamic behavior of a high-speed train operating on a curved track with failed fasteners. The model considers a high-speed train consisting of eight vehicles coupled with a ballasted track. The vehicle is modeled as a multi-body system, and the rail is modeled with a Timoshenko beam resting on the discrete sleepers. The vehicle model considers the effect of the end connections of the neighboring vehicles on the dynamic behavior. The track model takes into account the lateral, vertical, and torsional deformations of the rails and the effect of the discrete sleeper support on the coupling dynamics of the vehicles and the track. The sleepers are assumed to move backward at a constant speed to simulate the vehicle running along the track at the same speed. The train model couples with the track model by using a Hertzian contact model for the wheel/rail normal force calculation, and the nonlinear creep theory by Shen et al. (1984) is used for wheel/rail tangent force calculation. In the analysis, a curved track of 7000-m radius with failed fasteners is selected, and the effects of train operational speed and the number of failed fasteners on the dynamic behaviors of the train and the track are investigated in detail. Furthermore, the wheel/rail forces and derailment coefficient and the wheelset loading reduction are analyzed when the high-speed train passes over the curved track with the different number of continuously failed fasteners at different operational speeds. Through the detailed numerical analysis, it is found that the high-speed train can operate normally on the curved track of 7000-m radius at the speeds of 200 km/h to 350 km/h.展开更多
The influence of ramps on the transient rolling contact characteristics and damage mechanisms of switch rails remains unclear,presenting substantial challenges to the safety of railway operations.To this end,this pape...The influence of ramps on the transient rolling contact characteristics and damage mechanisms of switch rails remains unclear,presenting substantial challenges to the safety of railway operations.To this end,this paper constructs a transient rolling contact finite element model of the wheel-rail in switch under different ramps using ANSYS/LSDYNA method,and analyzes the tribology and damage characteristics when the wheel passes through the switch at a uniform speed.Our research findings reveal that the vibration induced in the switch rail during the wheel load transfer process leads to a step-like increase in the contact force.Moreover,the interaction between the wheel and the rail primarily involves slip contact,which may significantly contribute to the formation of corrugations on the switch rail.Additionally,the presence of large ramps exacerbates switch rail wear and rolling contact fatigue,resulting in a notable 13.2%increase in switch rail damage under 40‰ramp conditions compared to flat(0‰ramp)conditions.Furthermore,the large ramps can alter the direction of crack propagation,ultimately causing surface spalling of the rail.Therefore,large ramps intensify the dynamic interactions during the wheel load transfer process,further aggravating the crack and spalling damage to the switch rails.展开更多
Effects of N and Zr on the as-cast microstructure and properties after annealing of high-speed steel （HSS） were investigated by using electronic probe micro-analysis, Rockwell hardness test, X-ray diffractometry and...Effects of N and Zr on the as-cast microstructure and properties after annealing of high-speed steel （HSS） were investigated by using electronic probe micro-analysis, Rockwell hardness test, X-ray diffractometry and differential scanning calorimetry with combination of microstructure analysis. The results indicate that the addition of N and Zr will refine the eutectic structures and enhance the stability of carbides which are mainly MC, M2C and M7C3. The coarse dendritic structures decrease significantly and most of the carbides are distributed in the microstructure uniformly. Moreover, a kind of Zr-Si compound which only exists in VC is discovered, and this new phase is speculated to be related with the spheroidization of VC. The annealing process is set up to 6 different time periods which are 1, 3, 6, 10, 15 and 20 h, respectively. In different annealing processes at 750 ℃ which is lower than austenitizing temperature, the addition of N and Zr makes the decrease of hardness more obvious and restrains the precipitation of secondary carbides with the extension of time. Moreover, when the annealing time reaches 20 h, some clusters appear in the matrix of the two samples, and the density of clusters in HSS1 is lower, but the matrix of HSS1 contains more C and alloying elements which indicate more carbides precipitate.展开更多
The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport ...The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport industry must innovate in key technologies to ensure high-quality transmissions for passengers and railway operations.These systems must function effectively under high mobility conditions while prioritizing safety,ecofriendliness,comfort,transparency,predictability,and reliability.On the other hand,the proposal of 6 G wireless technology introduces new possibilities for innovation in communication technologies,which may truly realize the current vision of HSR.Therefore,this article gives a review of the current advanced 6 G wireless communication technologies for HSR,including random access and switching,channel estimation and beamforming,integrated sensing and communication,and edge computing.The main application scenarios of these technologies are reviewed,as well as their current research status and challenges,followed by an outlook on future development directions.展开更多
Based on the investigation of mechanical response and microstructure evolution of a commercial 7003 aluminum alloy under high-speed impact,a new simple and effective method was proposed to determine the critical strai...Based on the investigation of mechanical response and microstructure evolution of a commercial 7003 aluminum alloy under high-speed impact,a new simple and effective method was proposed to determine the critical strain required for the nucleation of adiabatic shear band(ASB).The deformation results of cylindrical and hat-shaped samples show that the critical strain required for ASB nucleation corresponds to the strain at the first local minimum after peak stress on the first derivative curve of true stress−true strain.The method of determining the critical strain for the nucleation of ASB through the first derivative of the flow stress curve is named the first derivative method.The proposed first derivative method is not only applicable to the 7003 aluminum alloy,but also to other metal materials,such as commercial purity titanium,WY-100 steel,and AM80 magnesium alloy.This proves that it has strong universality.展开更多
This study investigates the effects of billet homogenization temperature on the dynamic recrystallization behavior during high-speed extrusion and resultant microstructure and tensile properties of the Mg–5Bi–3Al(BA...This study investigates the effects of billet homogenization temperature on the dynamic recrystallization behavior during high-speed extrusion and resultant microstructure and tensile properties of the Mg–5Bi–3Al(BA53,wt%)alloy.Two billets homogenized at 350 and450℃(350H and 450H billets)are extruded at a high speed of 69 m/min.The 350H billet has a relatively smaller grain size and a higher abundance of fine Mg3Bi2particles compared to the 450H billet.During extrusion of the 350H billet,enhanced dynamic recrystallization occurs as a result of its finer grains and abundance of particles,while the growth of recrystallized grains is suppressed by the grain-boundary pinning effect of particles.Ultimately,the extruded 350H material is characterized by smaller grains,relatively greater number of Mg3Bi2particles,and a higher internal strain energy than the extruded 450H material.The tensile strength of the extruded 350H material is higher than that of the extruded 450H material owing to stronger grain-boundary hardening,particle hardening,and strain hardening effects.The extruded 350H material also exhibits a higher tensile elongation as its smaller grains inhibit the formation of crack-inducing undesirable twins during tension.The results from this study demonstrate that a decrease in the homogenization temperature from 450 to 350℃leads to improved strength and ductility in the high-speed-extruded BA53 material.展开更多
The effects of milling parameters on the surface quality,microstructures and mechanical properties of machined parts with ultrafine grained(UFG)gradient microstructures are investigated.The effects of the cutting spee...The effects of milling parameters on the surface quality,microstructures and mechanical properties of machined parts with ultrafine grained(UFG)gradient microstructures are investigated.The effects of the cutting speed,feed per tooth,cutting tool geometry and cooling strategy are demonstrated.It has been found that the surface quality of machined grooves can be improved by increasing the cutting speed.However,cryogenic cooling with CO_2 exhibits no significant improvement of surface quality.Microstructure and hardness investigations revealed similar microstructure and hardness variations near the machined groove walls for both utilized tool geometries.Therefore,cryogenic cooling can decrease more far-ranging hardness reductions due to high process temperatures,especially in the UFG regions of the machined parts,whilst it cannot prevent the drop in hardness directly at the groove walls.展开更多
Purpose–The bridge expansion joint(BEJ)is a key device for accommodating spatial displacement at the beam end,and for providing vertical support for running trains passing over the gap between the main bridge and the...Purpose–The bridge expansion joint(BEJ)is a key device for accommodating spatial displacement at the beam end,and for providing vertical support for running trains passing over the gap between the main bridge and the approach bridge.For long-span railway bridges,it must also be coordinated with rail expansion joint(REJ),which is necessary to accommodate the expansion and contraction of,and reducing longitudinal stress in,the rails.The main aim of this study is to present analysis of recent developments in the research and application of BEJs in high-speed railway(HSR)long-span bridges in China,and to propose a performance-based integral design method for BEJs used with REJs,from both theoretical and engineering perspectives.Design/methodology/approach–The study first presents a summary on the application and maintenance of BEJs in HSR long-span bridges in China representing an overview of their state of development.Results of a survey of typical BEJ faults were analyzed,and field testing was conducted on a railway cable-stayed bridge in order to obtain information on the major mechanical characteristics of its BEJ under train load.Based on the above,a performance-based integral design method for BEJs with maximum expansion range 1600 mm(±800 mm),was proposed,covering all stages from overall conceptual design to consideration of detailed structural design issues.The performance of the novel BEJ design thus derived was then verified via theoretical analysis under different scenarios,full-scale model testing,and field testing and commissioning.Findings–Two major types of BEJs,deck-type and through-type,are used in HSR long-span bridges in China.Typical BEJ faults were found to mainly include skewness of steel sleepers at the bridge gap,abnormally large longitudinal frictional resistance,and flexural deformation of the scissor mechanisms.These faults influence BEJ functioning,and thus adversely affect track quality and train running performance at the beam end.Due to their simple and integral structure,deck-type BEJs with expansion range 1200 mm(±600 mm)or less have been favored as a solution offering improved operational conditions,and have emerged as a standard design.However,when the expansion range exceeds the above-mentioned value,special design work becomes necessary.Therefore,based on engineering practice,a performance-based integral design method for BEJs used with REJs was proposed,taking into account four major categories of performance requirements,i.e.,mechanical characteristics,train running quality,durability and insulation performance.Overall BEJ design must mainly consider component strength and the overall stiffness of BEJ;the latter factor in particular has a decisive influence on train running performance at the beam end.Detailed BEJ structural design must stress minimization of the frictional resistance of its sliding surface.The static and dynamic performance of the newlydesigned BEJ with expansion range 1600 mm have been confirmed to be satisfactory,via numerical simulation,full-scale model testing,and field testing and commissioning.Originality/value–This research provides a broad overview of the status of BEJs with large expansion range in HSR long-span bridges in China,along with novel insights into their design.展开更多
基金supported by the National Research Foundation of Korea(NRF)grants funded by the Korea government(MSIT)(Nos.RS-2024–00351052 and RS-2024–00450561).
文摘This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely recognized AZ31 alloy in industry.Unlike the AZ31 alloy,which retains partially unrecrystallized grains,the high-speed-extruded BA56 alloy demonstrates a coarser but entirely recrystallized and more homogeneous microstructure.The fine-grained structure and abundant Mg_(3)Bi_(2) particles in the BA56 extrusion billet significantly enhance its DRX behavior,thus enabling rapid and complete recrystallization during extrusion.The BA56 alloy contains band-like fragmented Mg_(3)Bi_(2) particles and numerous fine Mg_(3)Bi_(2) particles distributed throughout the material,in contrast to the sparse Al_(8)Mn_(5) particles in the AZ31 alloy.These features contribute to superior mechanical properties of the BA56 alloy,which achieves tensile yield and ultimate tensile strengths of 205 and 292 MPa,respectively,compared to 196 and 270 MPa for the AZ31 alloy.The superior strength of the BA56 alloy,even with its coarser grain size,can be explained by its elevated Hall-Petch constant and the strengthening contribution from the fine Mg_(3)Bi_(2) particles.Additionally,the BA56 alloy demonstrates significant age-hardenability,achieving a 22%enhancement in hardness following T5 aging,attributed to the precipitation of nanoscale Mg_(3)Bi_(2) and Mg_(17)Al_(12) phases.By contrast,the AZ31 alloy shows minimal hardening due to the absence of precipitate formation during aging.These findings suggest that the BA56 alloy is a promising candidate for the production of extruded Mg components requiring a combination of high productivity,superior mechanical performance,and wide-ranging process adaptability.
基金supported by the National Key Research and Development Program of China(Grant No.2024YFE0203600)the National Natural Science Foundation of China(Grant No.62135009).
文摘Feature extraction in the optical domain offers a promising low-latency,high-throughput solution.Optical diffraction-based feature extraction operating under a coherent light source can further achieve parallel outputs with low energy consumption.However,it presents significant challenges for maintaining the coherent input,scaling the operation rates beyond 10 GHz,and ensuring the effective extraction of functional configuration simultaneously.We propose an optical feature extraction engine(OFE^(2)),which is composed of a diffraction operator and a data preparation module,powering high-speed feature extraction for both image and temporal series tasks.This OFE^(2)can achieve a core latency of less than 250.5 ps;in addition,it can reach a throughput of 250 GOPS and an efficiency of 2.06 TOPS/W.Supported by the OFE^(2),a novel feature extraction paradigm is emerging,enabling high-speed,low-latency service access for applications in scene recognition,medical assistance,and digital finance.
基金supported in part by the National Natural Science Foundation of China(Grant Nos.62203246 and 62003127)Shandong Provincial Natural Science Foundation(Grant No.ZR2024QF041)the Natural Science Foundation of Hebei Province(Grant No.F2023202060)。
文摘Virtual coupling is a novel technology that enables trains to run closely together without physical connections through communication and automation systems.The paper addresses an adaptive polynomial approximation algorithm for the cooperative control of high-speed trains(HSTs)under virtual coupling.It aims to solve the cooperative tracking control problem of HST formation operations under various scenarios,including known and unknown parameters.To enable the HST formation system to achieve cooperative operation while ensuring an appropriate spacing distance,the tracking errors of displacement and speed throughout the entire operation converge to zero.The proposed control strategy focuses on adopting polynomial approximation to handle unknown parameters,which are estimated via adaptive laws.Additionally,the unknown parameters of the HSTs are estimated online through adaptive laws.Experimental results verify the effectiveness of this method.
基金supported jointly by the National Natural Science Foundation of China(61703033,61790573)Beijing Natural Science Foundation(4192046)+1 种基金Fundamental Research Funds for Central Universities(2018JBZ002)State Key Laboratory of Rail Traffic Control and Safety(RCS2018ZT013),Beijing Jiaotong University
文摘This paper addresses the control design for automatic train operation of high-speed trains with protection constraints.A new resilient nonlinear gain-based feedback control approach is proposed,which is capable of guaranteeing,under some proper non-restrictive initial conditions,the protection constraints control raised by the distance-to-go(moving authority)curve and automatic train protection in practice.A new hyperbolic tangent function-based model is presented to mimic the whole operation process of high-speed trains.The proposed feedback control methods are easily implementable and computationally inexpensive because the presence of only two feedback gains guarantee satisfactory tracking performance and closed-loop stability,no adaptations of unknown parameters,function approximation of unknown nonlinearities,and attenuation of external disturbances in the proposed control strategies.Finally,rigorous proofs and comparative simulation results are given to demonstrate the effectiveness of the proposed approaches.
基金financially supported by the National Natural Science Foundation of China(Nos.52271034,52301058 and 52471042)China Postdoctoral Science Foundation(No.2023M732183)Postdoctoral Fellowship Program of CPSF(No.GZB20230399).
文摘Electric current heat treatment is an innovative technique to improve microstructures and mechanical properties of metallic materials.The microstructures and mechanical properties of a powder metallurgy high-speed steel(PM-HSS)treated by electric current heat treatment and traditional heat treatment are comparatively investigated.Results showed that after austenitizing at 1130°C,the structure of PM-HSS sample composed of ferrite matrix,M_(6)C,M_(23)C_(6),and MC carbides,transformed into a martensite matrix accompanied by M_(6)C and MC carbides.Compared to the traditional austenitizing at 1130℃ for 30 min,the electric current austenitizing at 1130℃ for 5 min dissolved more carbides,resulting in a greater solid solution of alloying elements in the matrix.Further traditional triple tempering led to carbide coarsening,whereas electric current triple tempering promoted the carbide dissolution.Notably,the dissolution of more carbides resulted in a higher C content in the martensite matrix of HSS treated by electric current,significantly promoting the formation of nanotwins(5-20 nm in width).The electric current triple tempering sample exhibited a yield strength of 3097 MPa,compressive strength of 5016 MPa,and a fracture strain of 30.0%,outperforming the traditional triple tempering sample by nearly 600 MPa in yield strength.Analysis revealed that this significant strengthening was primarily attributed to nanotwin formation and solid solution strengthening caused by carbide dissolution.
基金supported by the National Natural Science Foundation of China(Grant No.51705267)China Postdoctoral Science Foundation Grant(Grant No.2018M630750)+1 种基金National Natural Science Foundation of China(Grant No.51605397)Natural Science Foundation of Shandong Province,China(Grant No.ZR2014EEP002).
文摘The operational safety characteristics of trains exposed to a strong wind have caused great concern in recent years.In the present paper,the effect of the strong gust wind on a high-speed train is investigated.A typical gust wind model for any wind angle,named“Chinese hat gust wind model”,was first constructed,and an algorithm for computing the aerodynamic loads was elaborated accordingly.A vehicle system dynamic model was then set up in order to investigate the vehicle system dynamic characteristics.The assessment of the operational safety has been conducted by means of characteristic wind curves(CWC).As some of the parameters of the wind-train system were difficult to measure,we also investigated the impact of the uncertain system parameters on the CWC.Results indicate that,the descending order of the operational safety index of the vehicle for each wind angle is 90°-60°-120°-30°-150°,and the worst condition for the operational safety occurs when the wind angle reaches around 90°.According to our findings,the gust factor and aerodynamic side force coefficient have great impact on the critical wind speed.Thus,these two parameters require special attention when considering the operational safety of a railway vehicle subjected to strong gust wind.
基金supported by the 2013 Doctoral Innovation Funds of Southwest Jiaotong University and the Fundamental Research Funds for the Central Universitiesthe High-speed Railway Basic Research Fund Key Project of China(U1234208)the National Natural Science Foundation of China(50823004)
文摘The characteristic wind curve （CWC） was com- monly used in the previous work to evaluate the operational safety of the high-speed trains exposed to crosswinds. How- ever, the CWC only provide the dividing line between safety state and failure state of high-speed trains, which can not evaluate the risk of derailment of high-speed trains when ex- posed to natural winds. In the present paper, a more realistic approach taking into account the stochastic characteristics of natural winds is proposed, which can give a reasonable and effective assessment of the operational safety of high-speed trains under stochastic winds. In this approach, the longitudi- nal and lateral components of stochastic winds are simulated based on the Cooper theory and harmonic superposition. An algorithm is set up for calculating the unsteady aerody- namic forces （moments） of the high-speed trains exposed to stochastic winds. A multi-body dynamic model of the rail vehicle is established to compute the vehicle system dynamic response subjected to the unsteady aerodynamic forces （mo- ments） input. Then the statistical method is used to get the mean characteristic wind curve （MCWC） and spread range of the high-speed trains exposed to stochastic winds. It is found that the CWC provided by the previous analyticalmethod produces over-conservative limits. The methodol- ogy proposed in the present paper can provide more signif- icant reference for the safety operation of high-speed trains exposed to stochastic winds.
文摘Passengers’demands for riding comfort have been getting higher and higher as the high-speed railway develops.Scientific methods to analyze the interior noise of the high-speed train are needed and the operational transfer path analysis(OTPA)method provides a theoretical basis and guidance for the noise control of the train and overcomes the shortcomings of the traditional method,which has high test efficiency and can be carried out during the working state of the targeted machine.The OTPA model is established from the aspects of“path reference point-target point”and“sound source reference point-target point”.As for the mechanism of the noise transmission path,an assumption is made that the direct sound propagation is ignored,and the symmetric sound source and the symmetric path are merged.Using the operational test data and the OTPA method,combined with the results of spherical array sound source identification,the path contribution and sound source contribution of the interior noise are analyzed,respectively,from aspects of the total value and spectrum.The results show that the OTPA conforms to the calculation results of the spherical array sound source identification.At low speed,the contribution of the floor path and the contribution of the bogie sources are dominant.When the speed is greater than 300 km/h,the contribution of the roof path is dominant.Moreover,for the carriage with a pantograph,the lifted pantograph is an obvious source.The noise from the exterior sources of the train transfer into the interior mainly through the form of structural excitation,and the contribution of air excitation is non-significant.Certain analyses of train parts provide guides for the interior noise control.
基金funding support from a JSPS Grant-in-Aid for Young Scientists (B) (26870643)funding support from a JSPS fellowship in 2013–2014 during his sabbatical at the National Graduate Institute for Policy Studies,Japan
文摘We study cooperation between the airline and high-speed rail(HSR) sectors by formulating their joint profit as a maximization problem using a multinomial logit choice model in a three-node setting. We allow the nonpurchase option as an outside option available to consumers. The demand for each choice is not only a function of the price but also the service quality, such as the total trip time, frequency of service, and ease of connecting from the hub to a nearby HSR station. As a result, the following findings are presented. First, regardless of the service quality of either sector and the non-purchase option,cooperation decreases the total volume of the domestic market of a country. Second, when the attractiveness of the outside option is high, the HSR and air sectors can prevent a large reduction in the total volume by cooperation in the connecting market. However, this is not the case in the domestic market. Third, if the non-purchase quality in the domestic market is high, then cooperation increases the social welfare of the whole market. If the non-purchase quality is low, then cooperation increases the welfare of the whole market only in cases where the number of potential customers in the connecting market is relatively large. We also show the effect of improving air–rail service quality on each market share and on the total profit.
文摘In order to solve the outstanding construction traffic safety problems of operating expressways in mountainous areas and improve the traffic safety guarantee ability and operation efficiency of expressways, this paper, relying on G93 Yunwushan Tunnel Disease Remediation Project, investigates and analyzes the road characteristics, traffic characteristics and disease treatment of operating expressways, and comprehensively analyzes and evaluates the traffic safety control of road engineering maintenance projects based on the concept and method of operation safety, which is of great significance.
基金supported by a Horizontal Project on the Development of a Hybrid Energy Storage Simulation Model for Wind Power Based on an RT-LAB Simulation System(PH2023000190)the Inner Mongolia Natural Science Foundation Project and the Optimization of Exergy Efficiency of a Hybrid Energy Storage System with Crossover Control for Wind Power(2023JQ04).
文摘Present of wind power is sporadically and cannot be utilized as the only fundamental load of energy sources.This paper proposes a wind-solar hybrid energy storage system(HESS)to ensure a stable supply grid for a longer period.A multi-objective genetic algorithm(MOGA)and state of charge(SOC)region division for the batteries are introduced to solve the objective function and configuration of the system capacity,respectively.MATLAB/Simulink was used for simulation test.The optimization results show that for a 0.5 MW wind power and 0.5 MW photovoltaic system,with a combination of a 300 Ah lithium battery,a 200 Ah lead-acid battery,and a water storage tank,the proposed strategy reduces the system construction cost by approximately 18,000 yuan.Additionally,the cycle count of the electrochemical energy storage systemincreases from4515 to 4660,while the depth of discharge decreases from 55.37%to 53.65%,achieving shallow charging and discharging,thereby extending battery life and reducing grid voltage fluctuations significantly.The proposed strategy is a guide for stabilizing the grid connection of wind and solar power generation,capability allocation,and energy management of energy conservation systems.
基金Project supported by"863"Project (2006AA03Z532)the National Natural Science Foundation of China (NSFC 50341050)
文摘The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different RE additions were prepared on a horizontal centrifugal casting machine. The solidification process, eutectic structure transformation, carbide morphology, and the elements present, were all investigated by means of differential scanning calorimetry （DSC） and scanning electron microscopy energy dispersive spectrometry （SEM-EDS）. The energy produced by crack initiation and crack extension was analyzed using a digital impact test machine. It was found that rare earth elements increased the tensile strength of the steel by inducing crystallization of earlier eutectic γ-Fe during the solidification process, which in turn increased the solidification temperature and thinned the dendritic grains. Rare earth elements with large atomic radius changed the lattice parameters of the MC carbide by forming rare earth carbides. This had the effect of dispersing longpole M C carbides to provide carbide grains, thereby, reducing the formation of the gross carbide and making more V available, to increase the secondary hardening process and improve the hardness level. The presence of rare earth elements in the steel raised the impact toughness by changing the mechanism of MC carbide formation, thereby increasing the crack initiation energy.
基金Project supported by the National Natural Science Foundation of China (No. U1134202)the National Basic Research Program (973) of China (No. 2011CB711103)the Program for Changjiang Scholars and Innovative Research Team in University (Nos. IRT1178and SWJTU12ZT01), China
文摘A high-speed train-track coupling dynamic model is used to investigate the dynamic behavior of a high-speed train operating on a curved track with failed fasteners. The model considers a high-speed train consisting of eight vehicles coupled with a ballasted track. The vehicle is modeled as a multi-body system, and the rail is modeled with a Timoshenko beam resting on the discrete sleepers. The vehicle model considers the effect of the end connections of the neighboring vehicles on the dynamic behavior. The track model takes into account the lateral, vertical, and torsional deformations of the rails and the effect of the discrete sleeper support on the coupling dynamics of the vehicles and the track. The sleepers are assumed to move backward at a constant speed to simulate the vehicle running along the track at the same speed. The train model couples with the track model by using a Hertzian contact model for the wheel/rail normal force calculation, and the nonlinear creep theory by Shen et al. (1984) is used for wheel/rail tangent force calculation. In the analysis, a curved track of 7000-m radius with failed fasteners is selected, and the effects of train operational speed and the number of failed fasteners on the dynamic behaviors of the train and the track are investigated in detail. Furthermore, the wheel/rail forces and derailment coefficient and the wheelset loading reduction are analyzed when the high-speed train passes over the curved track with the different number of continuously failed fasteners at different operational speeds. Through the detailed numerical analysis, it is found that the high-speed train can operate normally on the curved track of 7000-m radius at the speeds of 200 km/h to 350 km/h.
基金Project(2023YFB2604304)supported by the National Key R&D Program of ChinaProjects(52122810,51978586,51778542,U23A20666,52472458)supported by the National Natural Science Foundation of China+1 种基金Project(K2022G034)supported by the Technology Research and Development Program of China National Railway Group Co.Ltd.Projects(2020JDJQ0033,2023NSFSC0884)supported by Sichuan Province Science and Technology Support Program,China。
文摘The influence of ramps on the transient rolling contact characteristics and damage mechanisms of switch rails remains unclear,presenting substantial challenges to the safety of railway operations.To this end,this paper constructs a transient rolling contact finite element model of the wheel-rail in switch under different ramps using ANSYS/LSDYNA method,and analyzes the tribology and damage characteristics when the wheel passes through the switch at a uniform speed.Our research findings reveal that the vibration induced in the switch rail during the wheel load transfer process leads to a step-like increase in the contact force.Moreover,the interaction between the wheel and the rail primarily involves slip contact,which may significantly contribute to the formation of corrugations on the switch rail.Additionally,the presence of large ramps exacerbates switch rail wear and rolling contact fatigue,resulting in a notable 13.2%increase in switch rail damage under 40‰ramp conditions compared to flat(0‰ramp)conditions.Furthermore,the large ramps can alter the direction of crack propagation,ultimately causing surface spalling of the rail.Therefore,large ramps intensify the dynamic interactions during the wheel load transfer process,further aggravating the crack and spalling damage to the switch rails.
文摘Effects of N and Zr on the as-cast microstructure and properties after annealing of high-speed steel （HSS） were investigated by using electronic probe micro-analysis, Rockwell hardness test, X-ray diffractometry and differential scanning calorimetry with combination of microstructure analysis. The results indicate that the addition of N and Zr will refine the eutectic structures and enhance the stability of carbides which are mainly MC, M2C and M7C3. The coarse dendritic structures decrease significantly and most of the carbides are distributed in the microstructure uniformly. Moreover, a kind of Zr-Si compound which only exists in VC is discovered, and this new phase is speculated to be related with the spheroidization of VC. The annealing process is set up to 6 different time periods which are 1, 3, 6, 10, 15 and 20 h, respectively. In different annealing processes at 750 ℃ which is lower than austenitizing temperature, the addition of N and Zr makes the decrease of hardness more obvious and restrains the precipitation of secondary carbides with the extension of time. Moreover, when the annealing time reaches 20 h, some clusters appear in the matrix of the two samples, and the density of clusters in HSS1 is lower, but the matrix of HSS1 contains more C and alloying elements which indicate more carbides precipitate.
基金National Natural Science Foundation of China(U2468201,62122012,62221001).
文摘The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport industry must innovate in key technologies to ensure high-quality transmissions for passengers and railway operations.These systems must function effectively under high mobility conditions while prioritizing safety,ecofriendliness,comfort,transparency,predictability,and reliability.On the other hand,the proposal of 6 G wireless technology introduces new possibilities for innovation in communication technologies,which may truly realize the current vision of HSR.Therefore,this article gives a review of the current advanced 6 G wireless communication technologies for HSR,including random access and switching,channel estimation and beamforming,integrated sensing and communication,and edge computing.The main application scenarios of these technologies are reviewed,as well as their current research status and challenges,followed by an outlook on future development directions.
基金National Natural Science Foundation of China (No. U20A20275)Natural Science Foundation of Hunan Province,China (No. 2021JJ40096)。
文摘Based on the investigation of mechanical response and microstructure evolution of a commercial 7003 aluminum alloy under high-speed impact,a new simple and effective method was proposed to determine the critical strain required for the nucleation of adiabatic shear band(ASB).The deformation results of cylindrical and hat-shaped samples show that the critical strain required for ASB nucleation corresponds to the strain at the first local minimum after peak stress on the first derivative curve of true stress−true strain.The method of determining the critical strain for the nucleation of ASB through the first derivative of the flow stress curve is named the first derivative method.The proposed first derivative method is not only applicable to the 7003 aluminum alloy,but also to other metal materials,such as commercial purity titanium,WY-100 steel,and AM80 magnesium alloy.This proves that it has strong universality.
基金supported by a National Research Foundation of Korea(NRF)grant funded by the Ministry of Science,ICT and Future Planning(MSIP,South Korea)(No.2019R1A2C1085272)the Materials and Components Technology Development Program of the Ministry of Trade,Industry and Energy(MOTIE,South Korea)(No.20011091)。
文摘This study investigates the effects of billet homogenization temperature on the dynamic recrystallization behavior during high-speed extrusion and resultant microstructure and tensile properties of the Mg–5Bi–3Al(BA53,wt%)alloy.Two billets homogenized at 350 and450℃(350H and 450H billets)are extruded at a high speed of 69 m/min.The 350H billet has a relatively smaller grain size and a higher abundance of fine Mg3Bi2particles compared to the 450H billet.During extrusion of the 350H billet,enhanced dynamic recrystallization occurs as a result of its finer grains and abundance of particles,while the growth of recrystallized grains is suppressed by the grain-boundary pinning effect of particles.Ultimately,the extruded 350H material is characterized by smaller grains,relatively greater number of Mg3Bi2particles,and a higher internal strain energy than the extruded 450H material.The tensile strength of the extruded 350H material is higher than that of the extruded 450H material owing to stronger grain-boundary hardening,particle hardening,and strain hardening effects.The extruded 350H material also exhibits a higher tensile elongation as its smaller grains inhibit the formation of crack-inducing undesirable twins during tension.The results from this study demonstrate that a decrease in the homogenization temperature from 450 to 350℃leads to improved strength and ductility in the high-speed-extruded BA53 material.
基金supported by the German Research Foundation(DFG)the DFG for funding the subproject B3 and C5 of the Collaborative Research Center 666 "Integral sheet metal design with higher order bifurcations-Development,Production,Evaluation″
文摘The effects of milling parameters on the surface quality,microstructures and mechanical properties of machined parts with ultrafine grained(UFG)gradient microstructures are investigated.The effects of the cutting speed,feed per tooth,cutting tool geometry and cooling strategy are demonstrated.It has been found that the surface quality of machined grooves can be improved by increasing the cutting speed.However,cryogenic cooling with CO_2 exhibits no significant improvement of surface quality.Microstructure and hardness investigations revealed similar microstructure and hardness variations near the machined groove walls for both utilized tool geometries.Therefore,cryogenic cooling can decrease more far-ranging hardness reductions due to high process temperatures,especially in the UFG regions of the machined parts,whilst it cannot prevent the drop in hardness directly at the groove walls.
基金National Key R&D Program of China(2022YFB2602900)R&D Fund Project of China Academy of Railway Sciences Corporation Limited(2021YJ084)+2 种基金Project of Science and Technology R&D Program of China Railway(2016G002-K)R&D Fund Project of China Railway Major Bridge Reconnaissance&Design Institute Co.,Ltd.(2021)R&D Fund Project of China Railway Shanghai Group(2021141).
文摘Purpose–The bridge expansion joint(BEJ)is a key device for accommodating spatial displacement at the beam end,and for providing vertical support for running trains passing over the gap between the main bridge and the approach bridge.For long-span railway bridges,it must also be coordinated with rail expansion joint(REJ),which is necessary to accommodate the expansion and contraction of,and reducing longitudinal stress in,the rails.The main aim of this study is to present analysis of recent developments in the research and application of BEJs in high-speed railway(HSR)long-span bridges in China,and to propose a performance-based integral design method for BEJs used with REJs,from both theoretical and engineering perspectives.Design/methodology/approach–The study first presents a summary on the application and maintenance of BEJs in HSR long-span bridges in China representing an overview of their state of development.Results of a survey of typical BEJ faults were analyzed,and field testing was conducted on a railway cable-stayed bridge in order to obtain information on the major mechanical characteristics of its BEJ under train load.Based on the above,a performance-based integral design method for BEJs with maximum expansion range 1600 mm(±800 mm),was proposed,covering all stages from overall conceptual design to consideration of detailed structural design issues.The performance of the novel BEJ design thus derived was then verified via theoretical analysis under different scenarios,full-scale model testing,and field testing and commissioning.Findings–Two major types of BEJs,deck-type and through-type,are used in HSR long-span bridges in China.Typical BEJ faults were found to mainly include skewness of steel sleepers at the bridge gap,abnormally large longitudinal frictional resistance,and flexural deformation of the scissor mechanisms.These faults influence BEJ functioning,and thus adversely affect track quality and train running performance at the beam end.Due to their simple and integral structure,deck-type BEJs with expansion range 1200 mm(±600 mm)or less have been favored as a solution offering improved operational conditions,and have emerged as a standard design.However,when the expansion range exceeds the above-mentioned value,special design work becomes necessary.Therefore,based on engineering practice,a performance-based integral design method for BEJs used with REJs was proposed,taking into account four major categories of performance requirements,i.e.,mechanical characteristics,train running quality,durability and insulation performance.Overall BEJ design must mainly consider component strength and the overall stiffness of BEJ;the latter factor in particular has a decisive influence on train running performance at the beam end.Detailed BEJ structural design must stress minimization of the frictional resistance of its sliding surface.The static and dynamic performance of the newlydesigned BEJ with expansion range 1600 mm have been confirmed to be satisfactory,via numerical simulation,full-scale model testing,and field testing and commissioning.Originality/value–This research provides a broad overview of the status of BEJs with large expansion range in HSR long-span bridges in China,along with novel insights into their design.
