Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along ...Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along the Primorsky No.1 and No.2 transportation corridors.First,the evaluation of urban accessibility level with and without Primorsky No.1 and No.2 high-speed rails(HSRs)opening was conducted with two indicators,i.e.,the weighted average travel time,and the economic potential.After the evaluation,the spatial differentiation pattern of the accessibility changes with and without Primorsky No.1 and No.2 HSRs opening was performed respectively using ArcGIS.On these bases,the regional spatial effects brought by Primorsky No.1 and No.2 HSRs opening were studied.The results are as following.First,the urban accessibility level will be greatly improved by the opening of Primorsky No.1 and No.2 HSRs.All adjacent cities will be integrated into‘1 h HSR communication circle’and the whole journey will be integrated into‘4 h HSR communication circle’along Primorsky No.1 and No.2 corridors,respectively.The HSR accessibility of Primorsky No.1 corridor is stronger than that of Primorsky No.2 corridor.But the HSR accessibility improvement degree of Primorsky No.1 corridor is weaker than that of Primorsky No.2 corridor.Second,spatially,along Primorsky No.1 and No.2 corridors,the HSR accessibility level of the cities which are located in China is stronger than those cities located in Russia,showing the‘High West,Low East’patterns.The HSR accessibility improvement degree of the cities which are located in Russia and Sino-Russian border is stronger than those cities located in China,showing the‘High East,Low West’patterns.Third,Primorsky No.1 and No.2 corridors could connect the China’s‘Heilongjiang Land Sea Silk Road Economic Belt’and‘Changchun-Jilin-Tumen Development Pilot Zone’respectively,gradually involving into the development of China’s Harbin-Changchun Megalopolis.Relying on Harbin(China)and Changchun(China),Primorsky No.1 and No.2 HSRs could connect Northeast China-Beijing HSR,accelerating the diffusion of population,economy and other flows from China’s Beijing-Tianjin-Hebei Urban Agglomeration to Northeast China,and then to Russia’s Far East Federal District.Relying on Suifenhe(China)and Hunchun(China),Primorsky No.1 and No.2 HSRs could be conducive to the development of the second largest sea channels for Northeast China,creating the Northeast Asian Urban Belt,and new sea-rail intermodal pattern among China,Russia,Democratic People’s Republic of Korea,Japan and Republic of Korea.Relying on Vladivostok(Russia)and Zarubino(Russia),Primorsky No.1 and No.2 corridors could connect the‘Ice Silk Road’,building the‘Sino-Russian Northern Maritime Corridor’and‘Sino-Russian Arctic Blue Economic Areas’.展开更多
Aircraft disturbs the adjacent atmospheric environment in flight,forming spatial distribution features of atmospheric density that differ from the natural background,which may potentially be utilized as tracer charact...Aircraft disturbs the adjacent atmospheric environment in flight,forming spatial distribution features of atmospheric density that differ from the natural background,which may potentially be utilized as tracer characteristics to introduce new technologies for indirectly sensing the presence of aircraft.In this paper,the concept of a long-range aircraft detection based on the atmospheric disturbance density field is proposed,and the detection mode of tomographic imaging of the scattering light of an atmospheric disturbance flow field is designed.By modeling the spatial distribution of the disturbance density field,the scattered echo signal images of active light towards the disturbance field at long distance are simulated.On this basis,the characteristics of the disturbance optical signal at the optimal detection resolution are analyzed.The results show that the atmospheric disturbance flow field of the supersonic aircraft presents circular in the light-scattering echo images.The disturbance signal can be further highlighted by differential processing of the adjacent scattering images.As the distance behind the aircraft increases,the diffusion range of the disturbance signal increases,and the signal intensity and contrast with the background decrease.Under the ground-based observation conditions of the aircraft at a height of 10000 m,a Mach number of1.6,and a detection distance of 100 km,the contrast between the disturbance signal and the back-ground was 30 d B at a distance of one time from the rear of the fuselage,and the diffusion diameter of the disturbance signal was 50 m.At a distance eight times the length of the aircraft,the contrast decreased to 10 dB,and the diameter increased to 290 m.The contrast was reduced to 3 dB at a distance nine times the length of the aircraft,and the diameter was diffused to 310 m.These results indicate the possibility of long-range aircraft detection based on the characteristics of the atmospheric density field.展开更多
The complex flow characteristics of transverse jet in high-speed crossflow involve several separation regions and multiple shock waves,which make it difficult to capture and precisely predict the flow field state in r...The complex flow characteristics of transverse jet in high-speed crossflow involve several separation regions and multiple shock waves,which make it difficult to capture and precisely predict the flow field state in real time merely by relying on traditional approaches.With the rapid advancement of deep learning technology,its powerful data processing capability offers a fast method for the prediction of the transverse jet flow field.Consequently,a prediction model based on deep learning is established,with the aim of obtaining the flow characteristics of a transverse jet under different freestream and jet conditions.This study segments the complex grid into several individual grids and trains them independently.The trained model can successfully establish the nonlinear mapping relationship between the transverse jet flow field and the input parameters.The prediction accuracy of the established model for the wall pressure under different conditions exceeds 99%,and the established model is also capable of reproducing structures such as shock waves and recirculation zones in the overall flow field,thereby achieving highly precise and efficient prediction of the jet structure and flow information.The results suggest that in contrast to the traditional numerical simulation,this deep learning model demonstrates greater efficiency in predicting the transverse jet flow field.展开更多
Ventilation systems are critical for improving the cabin environment in high-speed trains,and their interest has increased significantly.However,whether air supply non-verticality deteriorates the cabin air environmen...Ventilation systems are critical for improving the cabin environment in high-speed trains,and their interest has increased significantly.However,whether air supply non-verticality deteriorates the cabin air environment,and the flow mechanism behind it and the degree of deterioration are not known.This study first analyzes the interaction between deflection angle and cabin flow field characteristics and ventilation performance.The results revealed that the interior temperature and pollutant concentration decreased slightly with increasing deflection angle,but resulted in significant deterioration of thermal comfort and air quality.This is evidenced by an increase in both draught rate and non-uniformity coefficient,an increase in the number of measurement points that do not satisfy the micro-wind speed and temperature difference requirements by about 5% and 15%,respectively,and an increase in longitudinal penetration of pollutants by a factor of about 5 and the appearance of locking regions at the ends of cabin.The results also show that changing the deflection pattern only affects the region of deterioration and does not essentially improve this deterioration.This study can provide reference and help for the ventilation design of high-speed trains.展开更多
Traffic is an indispensable prerequisite for a tourism system. The ＂four vertical and four horizontal＂ HSR network represents an important milestone of the ＂traffic revolution＂ in China. It will affect the spatial...Traffic is an indispensable prerequisite for a tourism system. The ＂four vertical and four horizontal＂ HSR network represents an important milestone of the ＂traffic revolution＂ in China. It will affect the spatial pattern of tourism accessibility in Chinese cities, thus substan- tially increasing their power to attract tourists and their radiation force. This paper examines the evolution and spatial characteristics of the power to attract tourism of cities linked by China＇s HSR network by measuring the influence of accessibility of 338 HSR-linked cities using GIS analysis. The results show the following. （1） The accessibility of Chinese cities is optimized by the HSR network, whose spatial pattern of accessibility exhibits an obvious traf- fic direction and causes a high-speed rail-corridor effect. （2） The spatial pattern of tourism field strength in Chinese cities exhibits the dual characteristics of multi-center annular diver- gence and dendritic diffusion. Dendritic diffusion is particularly more obvious along the HSR line. The change rate of urban tourism field strength forms a high-value corridor along the HSR line and exhibits a spatial pattern of decreasing area from the center to the outer limit along the HSR line. （3） The influence of the higher and highest tourism field strength areas along the HSR line is most significant, and the number of cities that distribute into these two types of tourism field strengths significantly increases： their area expands by more than 100% HSR enhances the tourism field strength value of regional central cities, and the radiation range of tourism attraction extends along the HSR line.展开更多
During high-speed gas metal arc welding （GMAW）, the backward flowing molten jet with high momentum in the weld pool is considered to be responsible for the occurrence of humping bead. To suppress humping bead, an el...During high-speed gas metal arc welding （GMAW）, the backward flowing molten jet with high momentum in the weld pool is considered to be responsible for the occurrence of humping bead. To suppress humping bead, an electromagnetic device is developed and coupled with the welding system. By adjusting the conditions of external magnetic field, forward electromagnetic force is obtained to reduce the momentum of the backward flow of molten metal in weld pool. Consequently, the humping bead can be suppressed by adjusting the external magnetic field. Bead-on-plate welding experiment was conducted on mild steel plates, and the influence of magnetic flux density on the arc deflection angle and weld bead quality is investigated. It is found that external magnetic field can remarkably adjust the momentum of backward flow jet and significantly improve the quality of weld bead.展开更多
Based on transient temperature field theory of heat conduction, the solar temperature field calculation model of U-shape sectioned high-speed railway cable-stayed bridge under actions of concrete beams and ballast was...Based on transient temperature field theory of heat conduction, the solar temperature field calculation model of U-shape sectioned high-speed railway cable-stayed bridge under actions of concrete beams and ballast was established. Using parametric programming language, finite element calculation modules considering climate conditions, bridge site, structure dimension and material thermophysical properties were compiled. Six standard day cycles with the strongest yearly radiation among the bridge sites were selected for sectional solar temperature field calculation and temperature distributions under different temperature-sensitive parameters were compared. The results show that under the influence of sunshine, U-shape section of the beam shows obvious nonlinear distribution characteristics and the maximum cross-section temperature difference is more than 21℃; the ballast significantly reduces sunshine temperature difference of the beam and temperature peak of the bottom margin lags with the increase of ballast thickness; the maximum cross-section vertical temperature gradient appears in summer while large transverse temperature difference appears in winter.展开更多
Recent years have seen a large number of high-speed railways built and will be built in seasonal frozen soil regions ot China. Although high-speed railways are characterized by being fast, comfortable and safe, higher...Recent years have seen a large number of high-speed railways built and will be built in seasonal frozen soil regions ot China. Although high-speed railways are characterized by being fast, comfortable and safe, higher standards for defor- mation of the railways＇ frozen subgrade are required. Meanwhile, changes in subgrade soil temperatures are the main factors affecting the deformation of frozen subgrade. Therefore, this paper selected typical test subgrade sections of the Harbin-Qiqihar Line, a special line for passenger transport built in the deep seasonal frozen soil regions of China, to monitor field temperatures. Also, the temperature changing laws of railways＇ subgrade in this region was analyzed by using testing data, the aim of which is to provide a technical support for future design and construction of buildings and structures in a deep seasonal frozen soil region.展开更多
With the increasing demand of higher travelling speed,a new streamlined high-speed maglev train has been designed to reach a speed of 600 km/h.To better capture the flow field structures around the maglev train,an imp...With the increasing demand of higher travelling speed,a new streamlined high-speed maglev train has been designed to reach a speed of 600 km/h.To better capture the flow field structures around the maglev train,an improved delayed detached eddy simulation(IDDES)is adopted to model the turbulence.Results show that the new maglev train has good aerodynamic load performance such as small drag coefficient contributing to energy conservation.The main frequencies of aerodynamic forces for each car have a scattered distribution.There are two pairs of counter-rotating large vortices in the non-streamlined part of the train that make the boundary layer thicker.Many high-intensity vortices are distributed in the narrow space between skirt plates or train floor and track.In the gap between the train floor and track(except near the tail car nose),the main frequency of vortex shedding remains constant and its strength increases exponentially in the streamwise direction.In the wake,the counter-rotating vortices gradually expand and reproduce some small vortices that move downward.The vortex has quite random and complex frequencydomain distribution characteristics in the wake.The maximum time-averaged velocity of the slipstream occurs near the nose of the head car,based on which,the track-side safety domain is divided.展开更多
This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely re...This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely recognized AZ31 alloy in industry.Unlike the AZ31 alloy,which retains partially unrecrystallized grains,the high-speed-extruded BA56 alloy demonstrates a coarser but entirely recrystallized and more homogeneous microstructure.The fine-grained structure and abundant Mg_(3)Bi_(2) particles in the BA56 extrusion billet significantly enhance its DRX behavior,thus enabling rapid and complete recrystallization during extrusion.The BA56 alloy contains band-like fragmented Mg_(3)Bi_(2) particles and numerous fine Mg_(3)Bi_(2) particles distributed throughout the material,in contrast to the sparse Al_(8)Mn_(5) particles in the AZ31 alloy.These features contribute to superior mechanical properties of the BA56 alloy,which achieves tensile yield and ultimate tensile strengths of 205 and 292 MPa,respectively,compared to 196 and 270 MPa for the AZ31 alloy.The superior strength of the BA56 alloy,even with its coarser grain size,can be explained by its elevated Hall-Petch constant and the strengthening contribution from the fine Mg_(3)Bi_(2) particles.Additionally,the BA56 alloy demonstrates significant age-hardenability,achieving a 22%enhancement in hardness following T5 aging,attributed to the precipitation of nanoscale Mg_(3)Bi_(2) and Mg_(17)Al_(12) phases.By contrast,the AZ31 alloy shows minimal hardening due to the absence of precipitate formation during aging.These findings suggest that the BA56 alloy is a promising candidate for the production of extruded Mg components requiring a combination of high productivity,superior mechanical performance,and wide-ranging process adaptability.展开更多
The 2022 M6.9 Menyuan earthquake caused severe damage to a high-speed railway bridge,which was designed for high-speed trains running at speeds of above 250 km/h and is located right next to the fault.Bridges of this ...The 2022 M6.9 Menyuan earthquake caused severe damage to a high-speed railway bridge,which was designed for high-speed trains running at speeds of above 250 km/h and is located right next to the fault.Bridges of this type have been widely used for rapidly constructing the high-speed railway network,but few bridges have been tested by near-fault devastating earthquakes.The potential severe impact of the earthquake on the high-speed railway is not only the safety of the infrastructure,trains and passengers,but also economic loss due to interrupted railway use.Therefore,a field survey was carried out immediately after the earthquake to collect time-sensitive data.The damage to the bridge was carefully investigated,and quantitative analyses were conducted to better understand the mechanism of the bridge failure.It was found that seismic action perpendicular to the bridge’s longitudinal direction caused severe damage to the girders and rails,while none of the piers showed obvious deformation or cracking.The maximum values of transverse displacement,out-of-plane rotation and twisting angle of girders reached 212.6 cm,3.1 degrees and 19.9 degrees,respectively,causing severe damage to the bearing supports and anti-seismic retaining blocks.These observations provide a basis for improving the seismic design of high-speed railway bridges located in near-fault areas.展开更多
The influence of ramps on the transient rolling contact characteristics and damage mechanisms of switch rails remains unclear,presenting substantial challenges to the safety of railway operations.To this end,this pape...The influence of ramps on the transient rolling contact characteristics and damage mechanisms of switch rails remains unclear,presenting substantial challenges to the safety of railway operations.To this end,this paper constructs a transient rolling contact finite element model of the wheel-rail in switch under different ramps using ANSYS/LSDYNA method,and analyzes the tribology and damage characteristics when the wheel passes through the switch at a uniform speed.Our research findings reveal that the vibration induced in the switch rail during the wheel load transfer process leads to a step-like increase in the contact force.Moreover,the interaction between the wheel and the rail primarily involves slip contact,which may significantly contribute to the formation of corrugations on the switch rail.Additionally,the presence of large ramps exacerbates switch rail wear and rolling contact fatigue,resulting in a notable 13.2%increase in switch rail damage under 40‰ramp conditions compared to flat(0‰ramp)conditions.Furthermore,the large ramps can alter the direction of crack propagation,ultimately causing surface spalling of the rail.Therefore,large ramps intensify the dynamic interactions during the wheel load transfer process,further aggravating the crack and spalling damage to the switch rails.展开更多
As an integrated control unit that directly transfo rm s digital electric signals into analogy hydraulic signals, High-speed response solenoid valve (HSV) plays an important role in determining an electro-hydrauli c a...As an integrated control unit that directly transfo rm s digital electric signals into analogy hydraulic signals, High-speed response solenoid valve (HSV) plays an important role in determining an electro-hydrauli c automatic system’s overall performance. In the process of designing an HSV, o ne should well understand that various soft magnetic material properties and geo metries greatly affect HSV’s magnetic field design that accordingly has a direc t influence on HSV’s electric performance. As an approach of improving HSV perf ormance, this paper presents an optimal design method on HSV’s magnetic field b y making a full consideration of the effects of various soft magnetic material a nd geometries. The proposed optimal design method, based on HSV’s three-dimens ion solid modeling with the PRO/E software, simplifying from the previous three -dimension solid model to the axially symmetric plane model of the magnetic fie ld and the consequent the magnetic finite element method simulating within ANSYS analysis environment for obtaining accurate results on the distribution of HSV ’s magnetic field and flux-line as well as the magnetic force, can achieve lar ger magnetic force and lower power of an HSV by adjusting the structure paramete rs of the solenoid valve and selecting various soft magnetic materials which are of different B-H (flux density vs. field intensity) curves. Considering the no nlinearity and saturation of various soft magnetic materials, this paper process es the nonlinearity simulated calculation and experiment measure of three soft m agnetic materials and different structure parameters. The comparison of the simu lating and experimenting results proves that the simulating calculation and the proposed optimal design method are effective in HSV’s designing and its perform ance prediction. The researching results show that, for HSV’s designing, the pr oposed optimal design method can well simulate HSV’s the magnetic field, enhanc e the reliability and accuracy, reduce the cost, shorten the cycle, and henc e has practical value for engineering purpose.展开更多
The simulation of the ground effect has always been a technical difficulty in wind tunnel tests of high-speed trains.In this paper,large eddy simulation and the curl acoustic integral equation were used to simulate th...The simulation of the ground effect has always been a technical difficulty in wind tunnel tests of high-speed trains.In this paper,large eddy simulation and the curl acoustic integral equation were used to simulate the flow-acoustic field results of high-speed trains under four ground simulation systems(GSSs):“moving ground+rotating wheel”,“stationary ground+rotating wheel”,“moving ground+stationary wheel”,and“stationary ground+stationary wheel”.By comparing the fluid-acoustic field results of the four GSSs,the influence laws of different GSSs on the flow field structure,aero-acoustic source,and far-field radiation noise characteristics were investigated,providing guidance for the acoustic wind tunnel testing of high-speed trains.The calculation results of the aerodynamic noise of a 350 km/h high-speed train show that the moving ground and rotating wheel affect mainly the aero-acoustic performance under the train bottom.The influence of the rotating wheel on the equivalent sound source power of the whole vehicle was not more than 5%,but that of the moving ground slip was more than 15%.The average influence of the rotating wheel on the sound pressure level radiated by the whole vehicle was 0.3 dBA,while that of the moving ground was 1.8 dBA.展开更多
The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport ...The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport industry must innovate in key technologies to ensure high-quality transmissions for passengers and railway operations.These systems must function effectively under high mobility conditions while prioritizing safety,ecofriendliness,comfort,transparency,predictability,and reliability.On the other hand,the proposal of 6 G wireless technology introduces new possibilities for innovation in communication technologies,which may truly realize the current vision of HSR.Therefore,this article gives a review of the current advanced 6 G wireless communication technologies for HSR,including random access and switching,channel estimation and beamforming,integrated sensing and communication,and edge computing.The main application scenarios of these technologies are reviewed,as well as their current research status and challenges,followed by an outlook on future development directions.展开更多
This study addresses the significant disparity in aerodynamic uplift forces experienced by single-strip high-speed pantographs under different operating directions.A systematic numerical investigation was conducted to...This study addresses the significant disparity in aerodynamic uplift forces experienced by single-strip high-speed pantographs under different operating directions.A systematic numerical investigation was conducted to evaluate the influence of key geometric parameters on aerodynamic characteristics,culminating in two targeted adjustment strategies.The reliability of the computational methodology was validated through comparative analysis,which revealed less than a 6%deviation in aerodynamic drag between the numerical simulations and wind tunnel tests.Aerodynamic decomposition revealed that the operating direction critically impacts the uplift force,which is governed by two factors:streamwise cross-strip positioning and the angular orientation of the arm hinge.These factors collectively determine the divergent aerodynamic responses of the panhead and frame during directional changes.By establishing a parametric database encompassing four strip-to-crossbar spacing configurations and six arm diameter variations,nonlinear response patterns of the uplift forces under different operating directions to geometric modifications were quantified.Both adjustment approaches,simultaneously reducing both streamwise and vertical strip-to-crossbar spacings to half of the original dimensions or increasing the upper arm spanwise diameter to 1.45 times and decreasing the lower arm spanwise diameter to 0.55 times the baseline values,successfully constrained aerodynamic uplift force deviations between operating directions within 3%.展开更多
Based on a self-developed hydrodynamic cavitation device with different geometric parameters for circular multi-orifice plates,turbulence characteristics of cavitating flow behind multi-orifice plates,including the ef...Based on a self-developed hydrodynamic cavitation device with different geometric parameters for circular multi-orifice plates,turbulence characteristics of cavitating flow behind multi-orifice plates,including the effects of orifice number and orifice layout on longitudinal velocity,turbulence intensity,and Reynolds stress,were measured with the particle image velocimetry(PIV)technique.Flow regimes of the cavitating flow were also observed with high-speed photography.The experimental results showed the following:(1)high-velocity multiple cavitating jets occurred behind the multi-orifice plates,and the cavitating flow fields were characterized by topological structures;(2)the longitudinal velocity at each cross-section exhibited a sawtooth-like distribution close to the multi-orifice plate,and each sawtooth indicated one jet issuing from one orifice;(3)there were similar magnitudes and forms for the longitudinal and vertical turbulence intensities at the same cross-section;(4)the variation in amplitude of Reynolds stress increased with an increase in orifice number;and(5)the cavitation clouds in the flow fields became denser with the increase in orifice number,and the clouds generated by the staggered layout of orifices were greater in number than those generated by the checkerboard-type one for the same orifice number.The experimental results can be used to analyze the mechanism of killing pathogenic microorganisms through hydrodynamic cavitation.展开更多
Based on the investigation of mechanical response and microstructure evolution of a commercial 7003 aluminum alloy under high-speed impact,a new simple and effective method was proposed to determine the critical strai...Based on the investigation of mechanical response and microstructure evolution of a commercial 7003 aluminum alloy under high-speed impact,a new simple and effective method was proposed to determine the critical strain required for the nucleation of adiabatic shear band(ASB).The deformation results of cylindrical and hat-shaped samples show that the critical strain required for ASB nucleation corresponds to the strain at the first local minimum after peak stress on the first derivative curve of true stress−true strain.The method of determining the critical strain for the nucleation of ASB through the first derivative of the flow stress curve is named the first derivative method.The proposed first derivative method is not only applicable to the 7003 aluminum alloy,but also to other metal materials,such as commercial purity titanium,WY-100 steel,and AM80 magnesium alloy.This proves that it has strong universality.展开更多
Purpose–The bridge expansion joint(BEJ)is a key device for accommodating spatial displacement at the beam end,and for providing vertical support for running trains passing over the gap between the main bridge and the...Purpose–The bridge expansion joint(BEJ)is a key device for accommodating spatial displacement at the beam end,and for providing vertical support for running trains passing over the gap between the main bridge and the approach bridge.For long-span railway bridges,it must also be coordinated with rail expansion joint(REJ),which is necessary to accommodate the expansion and contraction of,and reducing longitudinal stress in,the rails.The main aim of this study is to present analysis of recent developments in the research and application of BEJs in high-speed railway(HSR)long-span bridges in China,and to propose a performance-based integral design method for BEJs used with REJs,from both theoretical and engineering perspectives.Design/methodology/approach–The study first presents a summary on the application and maintenance of BEJs in HSR long-span bridges in China representing an overview of their state of development.Results of a survey of typical BEJ faults were analyzed,and field testing was conducted on a railway cable-stayed bridge in order to obtain information on the major mechanical characteristics of its BEJ under train load.Based on the above,a performance-based integral design method for BEJs with maximum expansion range 1600 mm(±800 mm),was proposed,covering all stages from overall conceptual design to consideration of detailed structural design issues.The performance of the novel BEJ design thus derived was then verified via theoretical analysis under different scenarios,full-scale model testing,and field testing and commissioning.Findings–Two major types of BEJs,deck-type and through-type,are used in HSR long-span bridges in China.Typical BEJ faults were found to mainly include skewness of steel sleepers at the bridge gap,abnormally large longitudinal frictional resistance,and flexural deformation of the scissor mechanisms.These faults influence BEJ functioning,and thus adversely affect track quality and train running performance at the beam end.Due to their simple and integral structure,deck-type BEJs with expansion range 1200 mm(±600 mm)or less have been favored as a solution offering improved operational conditions,and have emerged as a standard design.However,when the expansion range exceeds the above-mentioned value,special design work becomes necessary.Therefore,based on engineering practice,a performance-based integral design method for BEJs used with REJs was proposed,taking into account four major categories of performance requirements,i.e.,mechanical characteristics,train running quality,durability and insulation performance.Overall BEJ design must mainly consider component strength and the overall stiffness of BEJ;the latter factor in particular has a decisive influence on train running performance at the beam end.Detailed BEJ structural design must stress minimization of the frictional resistance of its sliding surface.The static and dynamic performance of the newlydesigned BEJ with expansion range 1600 mm have been confirmed to be satisfactory,via numerical simulation,full-scale model testing,and field testing and commissioning.Originality/value–This research provides a broad overview of the status of BEJs with large expansion range in HSR long-span bridges in China,along with novel insights into their design.展开更多
This paper aims to explore the influence of different noise barrier heights on the sound source generation mechanisms of higher-speed trains(400 km/h)using a combination of delayed detached eddy simulation(DDES)and Ff...This paper aims to explore the influence of different noise barrier heights on the sound source generation mechanisms of higher-speed trains(400 km/h)using a combination of delayed detached eddy simulation(DDES)and Ffowcs Williams-Hawkings(FW-H)equations.Four cases are investigated and compared,i.e.1)no barrier,2)2.3 m,3)3.3 m,and 4)4.3 m single-side barriers on a bridge.Numerical results show that the presence of noise barriers causes an increase in sound source intensity ranging from 2.1 to 2.8 dB(A).However,the relationship between the barrier height and the increase in sound source intensity varies across different parts of the train.Compared with the head and front middle cars,the boundary layer is thicker around the rear-middle and tail car areas.A thick boundary layer introduces the influence of the crash wall,causing asymmetry and increases in sound source intensity.This is due to the deceleration region formed between the crash wall and the rail surface,as well as the acceleration region formed by the contraction of the flow channel in the noise barrier,both of which influence the sound source's characteristics.In addition,higher barriers exacerbate asymmetry and increases in sound source intensity.展开更多
基金Under the auspices of Heilongjiang Provincial Natural Science Foundation of China(No.YQ2024D012),National Natural Science Foundation of China(No.42071162,42101165,42501220)。
文摘Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along the Primorsky No.1 and No.2 transportation corridors.First,the evaluation of urban accessibility level with and without Primorsky No.1 and No.2 high-speed rails(HSRs)opening was conducted with two indicators,i.e.,the weighted average travel time,and the economic potential.After the evaluation,the spatial differentiation pattern of the accessibility changes with and without Primorsky No.1 and No.2 HSRs opening was performed respectively using ArcGIS.On these bases,the regional spatial effects brought by Primorsky No.1 and No.2 HSRs opening were studied.The results are as following.First,the urban accessibility level will be greatly improved by the opening of Primorsky No.1 and No.2 HSRs.All adjacent cities will be integrated into‘1 h HSR communication circle’and the whole journey will be integrated into‘4 h HSR communication circle’along Primorsky No.1 and No.2 corridors,respectively.The HSR accessibility of Primorsky No.1 corridor is stronger than that of Primorsky No.2 corridor.But the HSR accessibility improvement degree of Primorsky No.1 corridor is weaker than that of Primorsky No.2 corridor.Second,spatially,along Primorsky No.1 and No.2 corridors,the HSR accessibility level of the cities which are located in China is stronger than those cities located in Russia,showing the‘High West,Low East’patterns.The HSR accessibility improvement degree of the cities which are located in Russia and Sino-Russian border is stronger than those cities located in China,showing the‘High East,Low West’patterns.Third,Primorsky No.1 and No.2 corridors could connect the China’s‘Heilongjiang Land Sea Silk Road Economic Belt’and‘Changchun-Jilin-Tumen Development Pilot Zone’respectively,gradually involving into the development of China’s Harbin-Changchun Megalopolis.Relying on Harbin(China)and Changchun(China),Primorsky No.1 and No.2 HSRs could connect Northeast China-Beijing HSR,accelerating the diffusion of population,economy and other flows from China’s Beijing-Tianjin-Hebei Urban Agglomeration to Northeast China,and then to Russia’s Far East Federal District.Relying on Suifenhe(China)and Hunchun(China),Primorsky No.1 and No.2 HSRs could be conducive to the development of the second largest sea channels for Northeast China,creating the Northeast Asian Urban Belt,and new sea-rail intermodal pattern among China,Russia,Democratic People’s Republic of Korea,Japan and Republic of Korea.Relying on Vladivostok(Russia)and Zarubino(Russia),Primorsky No.1 and No.2 corridors could connect the‘Ice Silk Road’,building the‘Sino-Russian Northern Maritime Corridor’and‘Sino-Russian Arctic Blue Economic Areas’.
文摘Aircraft disturbs the adjacent atmospheric environment in flight,forming spatial distribution features of atmospheric density that differ from the natural background,which may potentially be utilized as tracer characteristics to introduce new technologies for indirectly sensing the presence of aircraft.In this paper,the concept of a long-range aircraft detection based on the atmospheric disturbance density field is proposed,and the detection mode of tomographic imaging of the scattering light of an atmospheric disturbance flow field is designed.By modeling the spatial distribution of the disturbance density field,the scattered echo signal images of active light towards the disturbance field at long distance are simulated.On this basis,the characteristics of the disturbance optical signal at the optimal detection resolution are analyzed.The results show that the atmospheric disturbance flow field of the supersonic aircraft presents circular in the light-scattering echo images.The disturbance signal can be further highlighted by differential processing of the adjacent scattering images.As the distance behind the aircraft increases,the diffusion range of the disturbance signal increases,and the signal intensity and contrast with the background decrease.Under the ground-based observation conditions of the aircraft at a height of 10000 m,a Mach number of1.6,and a detection distance of 100 km,the contrast between the disturbance signal and the back-ground was 30 d B at a distance of one time from the rear of the fuselage,and the diffusion diameter of the disturbance signal was 50 m.At a distance eight times the length of the aircraft,the contrast decreased to 10 dB,and the diameter increased to 290 m.The contrast was reduced to 3 dB at a distance nine times the length of the aircraft,and the diameter was diffused to 310 m.These results indicate the possibility of long-range aircraft detection based on the characteristics of the atmospheric density field.
基金co-supported by the National Natural Science Foundation of China(No.12202488)the National Postdoctoral Researcher Program(Grants No.GZB20230985)+1 种基金the Natural Science Program of National University of Defense Technology(No.ZK22-30)the Independent Innovation Science Fund of National University of Defense Technology(No.24-ZZCX-BC-05)。
文摘The complex flow characteristics of transverse jet in high-speed crossflow involve several separation regions and multiple shock waves,which make it difficult to capture and precisely predict the flow field state in real time merely by relying on traditional approaches.With the rapid advancement of deep learning technology,its powerful data processing capability offers a fast method for the prediction of the transverse jet flow field.Consequently,a prediction model based on deep learning is established,with the aim of obtaining the flow characteristics of a transverse jet under different freestream and jet conditions.This study segments the complex grid into several individual grids and trains them independently.The trained model can successfully establish the nonlinear mapping relationship between the transverse jet flow field and the input parameters.The prediction accuracy of the established model for the wall pressure under different conditions exceeds 99%,and the established model is also capable of reproducing structures such as shock waves and recirculation zones in the overall flow field,thereby achieving highly precise and efficient prediction of the jet structure and flow information.The results suggest that in contrast to the traditional numerical simulation,this deep learning model demonstrates greater efficiency in predicting the transverse jet flow field.
基金Project(12372049)supported by the National Natural Science Foundation of ChinaProject(2682023ZTPY036)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2023TPL-T06)supported by the Independent Project of State Key Laboratory of Rail Transit Vehicle System,China。
文摘Ventilation systems are critical for improving the cabin environment in high-speed trains,and their interest has increased significantly.However,whether air supply non-verticality deteriorates the cabin air environment,and the flow mechanism behind it and the degree of deterioration are not known.This study first analyzes the interaction between deflection angle and cabin flow field characteristics and ventilation performance.The results revealed that the interior temperature and pollutant concentration decreased slightly with increasing deflection angle,but resulted in significant deterioration of thermal comfort and air quality.This is evidenced by an increase in both draught rate and non-uniformity coefficient,an increase in the number of measurement points that do not satisfy the micro-wind speed and temperature difference requirements by about 5% and 15%,respectively,and an increase in longitudinal penetration of pollutants by a factor of about 5 and the appearance of locking regions at the ends of cabin.The results also show that changing the deflection pattern only affects the region of deterioration and does not essentially improve this deterioration.This study can provide reference and help for the ventilation design of high-speed trains.
基金Foundation： National Natural Science Foundation of China, No. 41271134
文摘Traffic is an indispensable prerequisite for a tourism system. The ＂four vertical and four horizontal＂ HSR network represents an important milestone of the ＂traffic revolution＂ in China. It will affect the spatial pattern of tourism accessibility in Chinese cities, thus substan- tially increasing their power to attract tourists and their radiation force. This paper examines the evolution and spatial characteristics of the power to attract tourism of cities linked by China＇s HSR network by measuring the influence of accessibility of 338 HSR-linked cities using GIS analysis. The results show the following. （1） The accessibility of Chinese cities is optimized by the HSR network, whose spatial pattern of accessibility exhibits an obvious traf- fic direction and causes a high-speed rail-corridor effect. （2） The spatial pattern of tourism field strength in Chinese cities exhibits the dual characteristics of multi-center annular diver- gence and dendritic diffusion. Dendritic diffusion is particularly more obvious along the HSR line. The change rate of urban tourism field strength forms a high-value corridor along the HSR line and exhibits a spatial pattern of decreasing area from the center to the outer limit along the HSR line. （3） The influence of the higher and highest tourism field strength areas along the HSR line is most significant, and the number of cities that distribute into these two types of tourism field strengths significantly increases： their area expands by more than 100% HSR enhances the tourism field strength value of regional central cities, and the radiation range of tourism attraction extends along the HSR line.
基金The authors are grateful to the financial support for this research from the National Natural Science Foundation of China，the Research Fund for the Doctoral Program of Higher Education of China
文摘During high-speed gas metal arc welding （GMAW）, the backward flowing molten jet with high momentum in the weld pool is considered to be responsible for the occurrence of humping bead. To suppress humping bead, an electromagnetic device is developed and coupled with the welding system. By adjusting the conditions of external magnetic field, forward electromagnetic force is obtained to reduce the momentum of the backward flow of molten metal in weld pool. Consequently, the humping bead can be suppressed by adjusting the external magnetic field. Bead-on-plate welding experiment was conducted on mild steel plates, and the influence of magnetic flux density on the arc deflection angle and weld bead quality is investigated. It is found that external magnetic field can remarkably adjust the momentum of backward flow jet and significantly improve the quality of weld bead.
基金Project(51378503)supported by the National Natural Science Foundation of ChinaProject(2010G018-A-3)supported by Technology Research and Development Program of the Ministry of Railways,China
文摘Based on transient temperature field theory of heat conduction, the solar temperature field calculation model of U-shape sectioned high-speed railway cable-stayed bridge under actions of concrete beams and ballast was established. Using parametric programming language, finite element calculation modules considering climate conditions, bridge site, structure dimension and material thermophysical properties were compiled. Six standard day cycles with the strongest yearly radiation among the bridge sites were selected for sectional solar temperature field calculation and temperature distributions under different temperature-sensitive parameters were compared. The results show that under the influence of sunshine, U-shape section of the beam shows obvious nonlinear distribution characteristics and the maximum cross-section temperature difference is more than 21℃; the ballast significantly reduces sunshine temperature difference of the beam and temperature peak of the bottom margin lags with the increase of ballast thickness; the maximum cross-section vertical temperature gradient appears in summer while large transverse temperature difference appears in winter.
基金supported by the scientific research test of China Railway Corporation(Z2013-038)the National Natural Science Foundation of China(Nos.51208320 and 51178281)the Key Subject of China Railway Corporation(Nos.2014G003-F and 2014G005)
文摘Recent years have seen a large number of high-speed railways built and will be built in seasonal frozen soil regions ot China. Although high-speed railways are characterized by being fast, comfortable and safe, higher standards for defor- mation of the railways＇ frozen subgrade are required. Meanwhile, changes in subgrade soil temperatures are the main factors affecting the deformation of frozen subgrade. Therefore, this paper selected typical test subgrade sections of the Harbin-Qiqihar Line, a special line for passenger transport built in the deep seasonal frozen soil regions of China, to monitor field temperatures. Also, the temperature changing laws of railways＇ subgrade in this region was analyzed by using testing data, the aim of which is to provide a technical support for future design and construction of buildings and structures in a deep seasonal frozen soil region.
基金Project supported by the National Natural Science Foundation of China(No.51605397)the National Key R&D Program of China(No.2016YFB1200602-15)the Sichuan Provincial Science and Technology Support Program(No.2019YJ0227),China。
文摘With the increasing demand of higher travelling speed,a new streamlined high-speed maglev train has been designed to reach a speed of 600 km/h.To better capture the flow field structures around the maglev train,an improved delayed detached eddy simulation(IDDES)is adopted to model the turbulence.Results show that the new maglev train has good aerodynamic load performance such as small drag coefficient contributing to energy conservation.The main frequencies of aerodynamic forces for each car have a scattered distribution.There are two pairs of counter-rotating large vortices in the non-streamlined part of the train that make the boundary layer thicker.Many high-intensity vortices are distributed in the narrow space between skirt plates or train floor and track.In the gap between the train floor and track(except near the tail car nose),the main frequency of vortex shedding remains constant and its strength increases exponentially in the streamwise direction.In the wake,the counter-rotating vortices gradually expand and reproduce some small vortices that move downward.The vortex has quite random and complex frequencydomain distribution characteristics in the wake.The maximum time-averaged velocity of the slipstream occurs near the nose of the head car,based on which,the track-side safety domain is divided.
基金supported by the National Research Foundation of Korea(NRF)grants funded by the Korea government(MSIT)(Nos.RS-2024–00351052 and RS-2024–00450561).
文摘This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely recognized AZ31 alloy in industry.Unlike the AZ31 alloy,which retains partially unrecrystallized grains,the high-speed-extruded BA56 alloy demonstrates a coarser but entirely recrystallized and more homogeneous microstructure.The fine-grained structure and abundant Mg_(3)Bi_(2) particles in the BA56 extrusion billet significantly enhance its DRX behavior,thus enabling rapid and complete recrystallization during extrusion.The BA56 alloy contains band-like fragmented Mg_(3)Bi_(2) particles and numerous fine Mg_(3)Bi_(2) particles distributed throughout the material,in contrast to the sparse Al_(8)Mn_(5) particles in the AZ31 alloy.These features contribute to superior mechanical properties of the BA56 alloy,which achieves tensile yield and ultimate tensile strengths of 205 and 292 MPa,respectively,compared to 196 and 270 MPa for the AZ31 alloy.The superior strength of the BA56 alloy,even with its coarser grain size,can be explained by its elevated Hall-Petch constant and the strengthening contribution from the fine Mg_(3)Bi_(2) particles.Additionally,the BA56 alloy demonstrates significant age-hardenability,achieving a 22%enhancement in hardness following T5 aging,attributed to the precipitation of nanoscale Mg_(3)Bi_(2) and Mg_(17)Al_(12) phases.By contrast,the AZ31 alloy shows minimal hardening due to the absence of precipitate formation during aging.These findings suggest that the BA56 alloy is a promising candidate for the production of extruded Mg components requiring a combination of high productivity,superior mechanical performance,and wide-ranging process adaptability.
基金Scientific Research Funding of IEM under Grant No.2021EEEVL0211Natural Science Foundation of Heilongjiang Province under Grant No.JQ2021E006National Natural Science Foundation of China under Grant No.52208185。
文摘The 2022 M6.9 Menyuan earthquake caused severe damage to a high-speed railway bridge,which was designed for high-speed trains running at speeds of above 250 km/h and is located right next to the fault.Bridges of this type have been widely used for rapidly constructing the high-speed railway network,but few bridges have been tested by near-fault devastating earthquakes.The potential severe impact of the earthquake on the high-speed railway is not only the safety of the infrastructure,trains and passengers,but also economic loss due to interrupted railway use.Therefore,a field survey was carried out immediately after the earthquake to collect time-sensitive data.The damage to the bridge was carefully investigated,and quantitative analyses were conducted to better understand the mechanism of the bridge failure.It was found that seismic action perpendicular to the bridge’s longitudinal direction caused severe damage to the girders and rails,while none of the piers showed obvious deformation or cracking.The maximum values of transverse displacement,out-of-plane rotation and twisting angle of girders reached 212.6 cm,3.1 degrees and 19.9 degrees,respectively,causing severe damage to the bearing supports and anti-seismic retaining blocks.These observations provide a basis for improving the seismic design of high-speed railway bridges located in near-fault areas.
基金Project(2023YFB2604304)supported by the National Key R&D Program of ChinaProjects(52122810,51978586,51778542,U23A20666,52472458)supported by the National Natural Science Foundation of China+1 种基金Project(K2022G034)supported by the Technology Research and Development Program of China National Railway Group Co.Ltd.Projects(2020JDJQ0033,2023NSFSC0884)supported by Sichuan Province Science and Technology Support Program,China。
文摘The influence of ramps on the transient rolling contact characteristics and damage mechanisms of switch rails remains unclear,presenting substantial challenges to the safety of railway operations.To this end,this paper constructs a transient rolling contact finite element model of the wheel-rail in switch under different ramps using ANSYS/LSDYNA method,and analyzes the tribology and damage characteristics when the wheel passes through the switch at a uniform speed.Our research findings reveal that the vibration induced in the switch rail during the wheel load transfer process leads to a step-like increase in the contact force.Moreover,the interaction between the wheel and the rail primarily involves slip contact,which may significantly contribute to the formation of corrugations on the switch rail.Additionally,the presence of large ramps exacerbates switch rail wear and rolling contact fatigue,resulting in a notable 13.2%increase in switch rail damage under 40‰ramp conditions compared to flat(0‰ramp)conditions.Furthermore,the large ramps can alter the direction of crack propagation,ultimately causing surface spalling of the rail.Therefore,large ramps intensify the dynamic interactions during the wheel load transfer process,further aggravating the crack and spalling damage to the switch rails.
文摘As an integrated control unit that directly transfo rm s digital electric signals into analogy hydraulic signals, High-speed response solenoid valve (HSV) plays an important role in determining an electro-hydrauli c automatic system’s overall performance. In the process of designing an HSV, o ne should well understand that various soft magnetic material properties and geo metries greatly affect HSV’s magnetic field design that accordingly has a direc t influence on HSV’s electric performance. As an approach of improving HSV perf ormance, this paper presents an optimal design method on HSV’s magnetic field b y making a full consideration of the effects of various soft magnetic material a nd geometries. The proposed optimal design method, based on HSV’s three-dimens ion solid modeling with the PRO/E software, simplifying from the previous three -dimension solid model to the axially symmetric plane model of the magnetic fie ld and the consequent the magnetic finite element method simulating within ANSYS analysis environment for obtaining accurate results on the distribution of HSV ’s magnetic field and flux-line as well as the magnetic force, can achieve lar ger magnetic force and lower power of an HSV by adjusting the structure paramete rs of the solenoid valve and selecting various soft magnetic materials which are of different B-H (flux density vs. field intensity) curves. Considering the no nlinearity and saturation of various soft magnetic materials, this paper process es the nonlinearity simulated calculation and experiment measure of three soft m agnetic materials and different structure parameters. The comparison of the simu lating and experimenting results proves that the simulating calculation and the proposed optimal design method are effective in HSV’s designing and its perform ance prediction. The researching results show that, for HSV’s designing, the pr oposed optimal design method can well simulate HSV’s the magnetic field, enhanc e the reliability and accuracy, reduce the cost, shorten the cycle, and henc e has practical value for engineering purpose.
基金This work is supported by the National Natural Science Foundation of China(No.52272363)the Foundation of the Key Laboratory of Aerodynamic Noise Control(No.ANCL20200302),China.
文摘The simulation of the ground effect has always been a technical difficulty in wind tunnel tests of high-speed trains.In this paper,large eddy simulation and the curl acoustic integral equation were used to simulate the flow-acoustic field results of high-speed trains under four ground simulation systems(GSSs):“moving ground+rotating wheel”,“stationary ground+rotating wheel”,“moving ground+stationary wheel”,and“stationary ground+stationary wheel”.By comparing the fluid-acoustic field results of the four GSSs,the influence laws of different GSSs on the flow field structure,aero-acoustic source,and far-field radiation noise characteristics were investigated,providing guidance for the acoustic wind tunnel testing of high-speed trains.The calculation results of the aerodynamic noise of a 350 km/h high-speed train show that the moving ground and rotating wheel affect mainly the aero-acoustic performance under the train bottom.The influence of the rotating wheel on the equivalent sound source power of the whole vehicle was not more than 5%,but that of the moving ground slip was more than 15%.The average influence of the rotating wheel on the sound pressure level radiated by the whole vehicle was 0.3 dBA,while that of the moving ground was 1.8 dBA.
基金National Natural Science Foundation of China(U2468201,62122012,62221001).
文摘The rapid expansion of railways,especially High-Speed Railways(HSRs),has drawn considerable interest from both academic and industrial sectors.To meet the future vision of smart rail communications,the rail transport industry must innovate in key technologies to ensure high-quality transmissions for passengers and railway operations.These systems must function effectively under high mobility conditions while prioritizing safety,ecofriendliness,comfort,transparency,predictability,and reliability.On the other hand,the proposal of 6 G wireless technology introduces new possibilities for innovation in communication technologies,which may truly realize the current vision of HSR.Therefore,this article gives a review of the current advanced 6 G wireless communication technologies for HSR,including random access and switching,channel estimation and beamforming,integrated sensing and communication,and edge computing.The main application scenarios of these technologies are reviewed,as well as their current research status and challenges,followed by an outlook on future development directions.
基金supported by the Major Project of China Railway Co.,Ltd.(Grant No.K2021J004-A).
文摘This study addresses the significant disparity in aerodynamic uplift forces experienced by single-strip high-speed pantographs under different operating directions.A systematic numerical investigation was conducted to evaluate the influence of key geometric parameters on aerodynamic characteristics,culminating in two targeted adjustment strategies.The reliability of the computational methodology was validated through comparative analysis,which revealed less than a 6%deviation in aerodynamic drag between the numerical simulations and wind tunnel tests.Aerodynamic decomposition revealed that the operating direction critically impacts the uplift force,which is governed by two factors:streamwise cross-strip positioning and the angular orientation of the arm hinge.These factors collectively determine the divergent aerodynamic responses of the panhead and frame during directional changes.By establishing a parametric database encompassing four strip-to-crossbar spacing configurations and six arm diameter variations,nonlinear response patterns of the uplift forces under different operating directions to geometric modifications were quantified.Both adjustment approaches,simultaneously reducing both streamwise and vertical strip-to-crossbar spacings to half of the original dimensions or increasing the upper arm spanwise diameter to 1.45 times and decreasing the lower arm spanwise diameter to 0.55 times the baseline values,successfully constrained aerodynamic uplift force deviations between operating directions within 3%.
基金supported by the National Natural Science Foundation of China(Grant No.51479177).
文摘Based on a self-developed hydrodynamic cavitation device with different geometric parameters for circular multi-orifice plates,turbulence characteristics of cavitating flow behind multi-orifice plates,including the effects of orifice number and orifice layout on longitudinal velocity,turbulence intensity,and Reynolds stress,were measured with the particle image velocimetry(PIV)technique.Flow regimes of the cavitating flow were also observed with high-speed photography.The experimental results showed the following:(1)high-velocity multiple cavitating jets occurred behind the multi-orifice plates,and the cavitating flow fields were characterized by topological structures;(2)the longitudinal velocity at each cross-section exhibited a sawtooth-like distribution close to the multi-orifice plate,and each sawtooth indicated one jet issuing from one orifice;(3)there were similar magnitudes and forms for the longitudinal and vertical turbulence intensities at the same cross-section;(4)the variation in amplitude of Reynolds stress increased with an increase in orifice number;and(5)the cavitation clouds in the flow fields became denser with the increase in orifice number,and the clouds generated by the staggered layout of orifices were greater in number than those generated by the checkerboard-type one for the same orifice number.The experimental results can be used to analyze the mechanism of killing pathogenic microorganisms through hydrodynamic cavitation.
基金National Natural Science Foundation of China (No. U20A20275)Natural Science Foundation of Hunan Province,China (No. 2021JJ40096)。
文摘Based on the investigation of mechanical response and microstructure evolution of a commercial 7003 aluminum alloy under high-speed impact,a new simple and effective method was proposed to determine the critical strain required for the nucleation of adiabatic shear band(ASB).The deformation results of cylindrical and hat-shaped samples show that the critical strain required for ASB nucleation corresponds to the strain at the first local minimum after peak stress on the first derivative curve of true stress−true strain.The method of determining the critical strain for the nucleation of ASB through the first derivative of the flow stress curve is named the first derivative method.The proposed first derivative method is not only applicable to the 7003 aluminum alloy,but also to other metal materials,such as commercial purity titanium,WY-100 steel,and AM80 magnesium alloy.This proves that it has strong universality.
基金National Key R&D Program of China(2022YFB2602900)R&D Fund Project of China Academy of Railway Sciences Corporation Limited(2021YJ084)+2 种基金Project of Science and Technology R&D Program of China Railway(2016G002-K)R&D Fund Project of China Railway Major Bridge Reconnaissance&Design Institute Co.,Ltd.(2021)R&D Fund Project of China Railway Shanghai Group(2021141).
文摘Purpose–The bridge expansion joint(BEJ)is a key device for accommodating spatial displacement at the beam end,and for providing vertical support for running trains passing over the gap between the main bridge and the approach bridge.For long-span railway bridges,it must also be coordinated with rail expansion joint(REJ),which is necessary to accommodate the expansion and contraction of,and reducing longitudinal stress in,the rails.The main aim of this study is to present analysis of recent developments in the research and application of BEJs in high-speed railway(HSR)long-span bridges in China,and to propose a performance-based integral design method for BEJs used with REJs,from both theoretical and engineering perspectives.Design/methodology/approach–The study first presents a summary on the application and maintenance of BEJs in HSR long-span bridges in China representing an overview of their state of development.Results of a survey of typical BEJ faults were analyzed,and field testing was conducted on a railway cable-stayed bridge in order to obtain information on the major mechanical characteristics of its BEJ under train load.Based on the above,a performance-based integral design method for BEJs with maximum expansion range 1600 mm(±800 mm),was proposed,covering all stages from overall conceptual design to consideration of detailed structural design issues.The performance of the novel BEJ design thus derived was then verified via theoretical analysis under different scenarios,full-scale model testing,and field testing and commissioning.Findings–Two major types of BEJs,deck-type and through-type,are used in HSR long-span bridges in China.Typical BEJ faults were found to mainly include skewness of steel sleepers at the bridge gap,abnormally large longitudinal frictional resistance,and flexural deformation of the scissor mechanisms.These faults influence BEJ functioning,and thus adversely affect track quality and train running performance at the beam end.Due to their simple and integral structure,deck-type BEJs with expansion range 1200 mm(±600 mm)or less have been favored as a solution offering improved operational conditions,and have emerged as a standard design.However,when the expansion range exceeds the above-mentioned value,special design work becomes necessary.Therefore,based on engineering practice,a performance-based integral design method for BEJs used with REJs was proposed,taking into account four major categories of performance requirements,i.e.,mechanical characteristics,train running quality,durability and insulation performance.Overall BEJ design must mainly consider component strength and the overall stiffness of BEJ;the latter factor in particular has a decisive influence on train running performance at the beam end.Detailed BEJ structural design must stress minimization of the frictional resistance of its sliding surface.The static and dynamic performance of the newlydesigned BEJ with expansion range 1600 mm have been confirmed to be satisfactory,via numerical simulation,full-scale model testing,and field testing and commissioning.Originality/value–This research provides a broad overview of the status of BEJs with large expansion range in HSR long-span bridges in China,along with novel insights into their design.
基金Project(2022YFB2603400)supported by the National Key Research and Development Program,China。
文摘This paper aims to explore the influence of different noise barrier heights on the sound source generation mechanisms of higher-speed trains(400 km/h)using a combination of delayed detached eddy simulation(DDES)and Ffowcs Williams-Hawkings(FW-H)equations.Four cases are investigated and compared,i.e.1)no barrier,2)2.3 m,3)3.3 m,and 4)4.3 m single-side barriers on a bridge.Numerical results show that the presence of noise barriers causes an increase in sound source intensity ranging from 2.1 to 2.8 dB(A).However,the relationship between the barrier height and the increase in sound source intensity varies across different parts of the train.Compared with the head and front middle cars,the boundary layer is thicker around the rear-middle and tail car areas.A thick boundary layer introduces the influence of the crash wall,causing asymmetry and increases in sound source intensity.This is due to the deceleration region formed between the crash wall and the rail surface,as well as the acceleration region formed by the contraction of the flow channel in the noise barrier,both of which influence the sound source's characteristics.In addition,higher barriers exacerbate asymmetry and increases in sound source intensity.
