As the main component of the aircraft leading edge,the radome is often the first to be hit by raindrops and cause structural damage when passing through a rain field.Rain resistant coating is usually applied to ensure...As the main component of the aircraft leading edge,the radome is often the first to be hit by raindrops and cause structural damage when passing through a rain field.Rain resistant coating is usually applied to ensure the performance protection requirements.In order to clarify the rain erosion damage mechanism of radome coating and explore the influencing factors and mechanisms of coating material damage under different jet impact conditions,impact tests were conducted on three types of skin coating samples,and the damage mode was observed through electron microscopy characterization.The experimental results show that the typical morphology of rain erosion damage is annular surface peeling damage.The damage area and volume of the three coating samples increase with the continuous increase of raindrop impact velocity.The threshold velocity for initial damage to the coating is about 360 m/s;under the influence of the velocity component,the reduction in impact angle leads to a gradual reduction in the degree of damage to the sample.ABAQUS finite element simulation software was used to establish a constitutive model for coating rain erosion simulation and obtain the propagation law of stress waves during the impact process.The simulation results show that at the 75°impact angle,the jet impacts the surface of the specimen at different velocities,and as the impact velocity increases,the Mises equivalent stress on the surface shows an increasing trend,which is one of the main factors causing damage with increasing velocity.The effectiveness,rain erosion damage mode,and influencing mechanism of the model were verified based on the test results;the dynamic failure mechanism of the sample was further studied,and the stress propagation process at different impact angles was compared,revealing the influence mechanism and damage law of the impact angle on the high-speed raindrop impact of the material.展开更多
This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and...This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.展开更多
This paper proposes a passive control method to reduce peak values of slipstream and turbulent kinetic energy in a high-speed train wake by attaching vortex generators(VGs)onto the upper surface of the tail car.The im...This paper proposes a passive control method to reduce peak values of slipstream and turbulent kinetic energy in a high-speed train wake by attaching vortex generators(VGs)onto the upper surface of the tail car.The impact of the VGs is assessed through the improved delayed detached eddy simulations(IDDES)after validating predictions against previous experimental measurements and other numerical predictions for the base case.The simulations indicate that strategically installed VGs can reduce the average slipstream velocity(U slipstream)and the upper limit of slipstream velocity(U_(slipstream,max))by~17%and~15%,respectively,as well as moving the peaks downstream by approximately train height,thus reducing the danger posed by slipstream to waiting passengers and trackside workers.Analysis shows that the wake turbulent kinetic energy diminishes as the vortex generators decelerate the downwash flow and reduce shear production in the wake.It is also found that the presence of VGs significantly impacts the flow on the upper surface near the tail by modifying the unsteady trailing longitudinal vortices through the formation of additional counter-rotating longitudinal vortices from the VGs.These latter vortices prevent the merging of vortical airflow around the trailing nose tip,which is otherwise induced by the longitudinal vortex of the train.They also reduce vortex intensity through cross-annihilation and cross diffusion as the wake advects downstream,limiting outwards advection through interaction with the image pair,and contributing to a decrease in the peak slipstream value.The method proposed offers a simple approach to wake control leading to significant slipstream benefits.展开更多
The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle b...The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle box bearing failures.Therefore,it is extremely important to study the mechanism of axle box bearings.Firstly,the medium of thermal deformation establishes a coupling relationship between the system dynamics model and the thermal grid model,and then obtains the thermal force coupling model of the high-speed train axle box bearing.The coupling model is validated from the perspectives of system dynamics response and temperature response,proving its effectiveness in system dynamics response and temperature characteristic response.Comparing the coupling model with the dynamics model,it is found that thermal deformation complicates the dynamic re-sponse.Finally,using the Lundberg-Palmgren(L-P)bearing fatigue calculation method and damage accumu-lation theory,the bearing fatigue life is calculated,and it is found that thermal deformation deteriorates the bearing operating environment,reducing the bearing fatigue life.Finally,by comparing the bearing fatigue life under different working conditions,it is concluded that the faster the vehicle speed,the greater the load,and the smaller the initial radial clearance of the bearing,the fatigue life of the bearing is reduced.The shorter the lifespan.展开更多
Research on high-speed railways is a relatively new yet highly significant field in Vietnam.Among its key components,train control signaling plays a critical role,as it directly affects various interconnected systems,...Research on high-speed railways is a relatively new yet highly significant field in Vietnam.Among its key components,train control signaling plays a critical role,as it directly affects various interconnected systems,including infrastructure,traction power supply,operational planning,and overall railway safety.This article focuses on evaluating the capacity of the line based on the types of signals suitable for high-speed railways that have been effectively implemented in several European countries and successfully adapted in China.The research and simulation are conducted using MATLAB software,a reliable and widely adopted tool in the scientific community.The findings demonstrate that under normal conditions,the European Railway Traffic Management System/European Train Control System(ERTMS/ETCS)Level 2 signaling can support up to 23.7485 trains/hour/direction.Meanwhile,ERTMS/ETCS Level 3 with full moving block can accommodate up to 30.8735 trains/hour/direction,and ERTMS/ETCS Level 3 with fixed virtual blocks up to 29.4694 trains/hour/direction.In emergency scenarios,ERTMS/ETCS Level 3 with full moving block reduces headway by 33.27%compared to CTCS Level 3,while ERTMS/ETCS Level 3 with fixed virtual blocks achieves a 28.78%reduction.Overall,the ERTMS/ETCS Level 3 emerges as a state-of-the-art signaling technology offering high capacity and operational efficiency,and is recommended as a forward-looking solution for future implementation in Vietnam.展开更多
As China's high-speed railway technology advances,high-speed trains have emerged as a pivotal mode of transportation,instrumental in facilitating passenger and freight mobility while fostering robust regional eco-...As China's high-speed railway technology advances,high-speed trains have emerged as a pivotal mode of transportation,instrumental in facilitating passenger and freight mobility while fostering robust regional eco-nomic and trade interactions.Nonetheless,the safety of train operations remains a paramount concern,prompting extensive research into the dynamic behavior of critical components,which is essential to ensuring seamless and secure transportation services.This article commences by comprehensively reviewing the current landscape and evolutionary trajectory of dynamic model analysis for both traditional bearings and axle box bearings.Emphasis is placed on elucidating the profound influence of diverse bearing fault types on the system's kinematic state,alongside delving into the research methodologies employed in developing multi-physics field coupling models.Subsequently,it expounds on the content of investigations focusing on various wheel and track impairments,grounded in the dynamic modeling of the bearing vehicle coupling system.Concurrently,the intricate interplay between wheel-rail excitation and axle box bearing faults on the system's performance is elucidated.Concludingly,the article underscores the inadequacy of current multi-source fault diagnosis meth-odologies in tackling the intricacies of complex train operating environments,thereby highlighting its sig-nificance as a pressing and vital research agenda for the future.展开更多
The spatial offset of bridge has a significant impact on the safety,comfort,and durability of high-speed railway(HSR)operations,so it is crucial to rapidly and effectively detect the spatial offset of operational HSR ...The spatial offset of bridge has a significant impact on the safety,comfort,and durability of high-speed railway(HSR)operations,so it is crucial to rapidly and effectively detect the spatial offset of operational HSR bridges.Drive-by monitoring of bridge uneven settlement demonstrates significant potential due to its practicality,cost-effectiveness,and efficiency.However,existing drive-by methods for detecting bridge offset have limitations such as reliance on a single data source,low detection accuracy,and the inability to identify lateral deformations of bridges.This paper proposes a novel drive-by inspection method for spatial offset of HSR bridge based on multi-source data fusion of comprehensive inspection train.Firstly,dung beetle optimizer-variational mode decomposition was employed to achieve adaptive decomposition of non-stationary dynamic signals,and explore the hidden temporal relationships in the data.Subsequently,a long short-term memory neural network was developed to achieve feature fusion of multi-source signal and accurate prediction of spatial settlement of HSR bridge.A dataset of track irregularities and CRH380A high-speed train responses was generated using a 3D train-track-bridge interaction model,and the accuracy and effectiveness of the proposed hybrid deep learning model were numerically validated.Finally,the reliability of the proposed drive-by inspection method was further validated by analyzing the actual measurement data obtained from comprehensive inspection train.The research findings indicate that the proposed approach enables rapid and accurate detection of spatial offset in HSR bridge,ensuring the long-term operational safety of HSR bridges.展开更多
Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may com...Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may compromise their fatigue capacity.The most common structural design for railway noise barriers consists of vertical configurations of posts and panels.However,there have been few dynamic analyses of steel post/wood panel noise barriers under train-induced aerodynamic loads.This study used dynamic finite element analysis to assess the dynamic behavior of such noise barriers.Analysis of a 40-m-long noise barrier model and a triangular simplified load model,the latter of which effectively represented the detailed aerodynamic load,were first used to establish the model and input of the moving load during dynamic simulation.Then,the effects of different parameters on the dynamic response of the noise barrier were evaluated,including the damping ratio,the profile of the steel post,the span length of the panel,the barrier height,and the train speed.Gray relational analysis indicated that barrier height exhibited the highest correlations with the dynamic responses,followed by train speed,post profile,span length,and damping ratio.A reduction in the natural frequency and an increase in the train speed result in a higher peak response and more pronounced fluctuations between the nose and tail waves.The dynamic amplification factor(DAF)was found to be related to both the natural frequency and train speed.A model was proposed showing that the DAF significantly increases as the square of the natural frequency decreases and the cube of the train speed rises.展开更多
We demonstrate a high-speed rotating slit beam shaping method for femtosecond(fs)laser three-dimensional(3D)isotropic inscription in glass materials.By integrating fs laser direct writing with a real-time rotating sli...We demonstrate a high-speed rotating slit beam shaping method for femtosecond(fs)laser three-dimensional(3D)isotropic inscription in glass materials.By integrating fs laser direct writing with a real-time rotating slit mechanism,a 3D symmetric spherical focal field distribution is created in the laser-irradiated regions of transparent substrates.The corresponding focal field distribution is theoretically calculated and validated by examining the features of laser-inscribed lines in glass samples.Moreover,we investigate the influences of laser writing speed and slit rotational speed on the fabrication resolution in glass,and discuss the formation mechanism of the generated periodic microstructures.To showcase its powerful capability for3D isotropic fabrication,the high-speed rotating slit beam shaping method is applied to create straight optical waveguides,bending optical waveguides,and hollow microchannels in the glass.The proposed method holds great potential for the facile manufacture of diverse 3D isotropic microstructures and devices within transparent materials across various applications,including advanced photonics,microoptics,micro-electromechanical systems,and microfluidics.展开更多
Background:As an important indicator of subjective well-being(SWB),decent work is a key guarantee for the sustainable development of teachers and their psychological health and work quality.Faced with the rapid develo...Background:As an important indicator of subjective well-being(SWB),decent work is a key guarantee for the sustainable development of teachers and their psychological health and work quality.Faced with the rapid development of artificial intelligence and the global labor market,vocational college teachers are facing challenges such as workload pressure and limited career development,which may harm their well-being.This study aims to localize the measurement method of decent work in Chinese vocational education based on the theory of the Psychology of Working Theory,and explore the relationship mechanism between organizational support,career adaptability,decent work,and job satisfaction among vocational college teachers.Methods:A cross-sectional survey was conducted with 422 HVCU teachers in China(202 male,220 female)using the localized Perceived Organizational Support Scale,Career Adaptability Scale,Decent Work Scale,and Job Satisfaction Scale.Results:The overall level of HVCU teachers’decent work was above the median(Mean=4.09,SD=0.69),laying a foundation for their SWB.Decent work significantly and positively predicted job satisfaction(β=0.620,p<0.001).Organizational support(r=0.58,p<0.001)and career adaptability(r=0.82,p<0.001)can positively affect decent work,and further improve job satisfaction(collective R2 rising from 38.3%to 41.1%).Bootstrap analysis confirmed these mediating effects were robust.Conclusions:This study confirms that the combined effects of organizational support and career adaptability can enhance decent work,further improving teachers’job satisfaction and subsequent subjective well-being.Besides,this study provides an empirical basis for improving the well-being of higher vocational teachers and the sustainable development of vocational education,and has practical significance for improving the teacher incentive policy.展开更多
The construction of spot electricity markets plays a pivotal role in power system reforms,where market clearing systems profoundly influence market efficiency and security.Current clearing systems predominantly adopt ...The construction of spot electricity markets plays a pivotal role in power system reforms,where market clearing systems profoundly influence market efficiency and security.Current clearing systems predominantly adopt a single-system architecture,with research focusing primarily on accelerating solution algorithms through techniques such as high-efficiency parallel solvers and staggered decomposition of mixed-integer programming models.Notably absent are systematic studies evaluating the adaptability of primary-backup clearing systems incontingency scenarios—a critical gap given redundant systems’expanding applications in operational environments.This paper proposes a comprehensive evaluation framework for analyzing dual-system adaptability,demonstrated through an in-depth case study of the Inner Mongolia power market.First,we establish the innovative“Dual-Active Heterogeneous”architecture that enables independent parallelized operation and fault-isolated redundancy.Subsequently,key performance indices are quantitatively evaluated across four critical dimensions:unit commitment decisions,generator output constraints,transmission section congestion patterns,and clearing price formation mechanisms.An integrated fuzzy evaluation methodology incorporating grey relational analysis is employed for objective indicator weighting,enabling systematic quantification of system superiority under specific grid operating states.Empirical results based on actual operational data from 200 generation units demonstrate the framework’s efficacy in guiding optimal system selection,with particularly strong performance observed during peak load periods.The proposed approach shows high generalization potential for other regional markets employing redundant clearing mechanisms—particularly those with increasing renewable penetration and associated uncertainty.展开更多
Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along ...Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along the Primorsky No.1 and No.2 transportation corridors.First,the evaluation of urban accessibility level with and without Primorsky No.1 and No.2 high-speed rails(HSRs)opening was conducted with two indicators,i.e.,the weighted average travel time,and the economic potential.After the evaluation,the spatial differentiation pattern of the accessibility changes with and without Primorsky No.1 and No.2 HSRs opening was performed respectively using ArcGIS.On these bases,the regional spatial effects brought by Primorsky No.1 and No.2 HSRs opening were studied.The results are as following.First,the urban accessibility level will be greatly improved by the opening of Primorsky No.1 and No.2 HSRs.All adjacent cities will be integrated into‘1 h HSR communication circle’and the whole journey will be integrated into‘4 h HSR communication circle’along Primorsky No.1 and No.2 corridors,respectively.The HSR accessibility of Primorsky No.1 corridor is stronger than that of Primorsky No.2 corridor.But the HSR accessibility improvement degree of Primorsky No.1 corridor is weaker than that of Primorsky No.2 corridor.Second,spatially,along Primorsky No.1 and No.2 corridors,the HSR accessibility level of the cities which are located in China is stronger than those cities located in Russia,showing the‘High West,Low East’patterns.The HSR accessibility improvement degree of the cities which are located in Russia and Sino-Russian border is stronger than those cities located in China,showing the‘High East,Low West’patterns.Third,Primorsky No.1 and No.2 corridors could connect the China’s‘Heilongjiang Land Sea Silk Road Economic Belt’and‘Changchun-Jilin-Tumen Development Pilot Zone’respectively,gradually involving into the development of China’s Harbin-Changchun Megalopolis.Relying on Harbin(China)and Changchun(China),Primorsky No.1 and No.2 HSRs could connect Northeast China-Beijing HSR,accelerating the diffusion of population,economy and other flows from China’s Beijing-Tianjin-Hebei Urban Agglomeration to Northeast China,and then to Russia’s Far East Federal District.Relying on Suifenhe(China)and Hunchun(China),Primorsky No.1 and No.2 HSRs could be conducive to the development of the second largest sea channels for Northeast China,creating the Northeast Asian Urban Belt,and new sea-rail intermodal pattern among China,Russia,Democratic People’s Republic of Korea,Japan and Republic of Korea.Relying on Vladivostok(Russia)and Zarubino(Russia),Primorsky No.1 and No.2 corridors could connect the‘Ice Silk Road’,building the‘Sino-Russian Northern Maritime Corridor’and‘Sino-Russian Arctic Blue Economic Areas’.展开更多
Virtual coupling is a novel technology that enables trains to run closely together without physical connections through communication and automation systems.The paper addresses an adaptive polynomial approximation alg...Virtual coupling is a novel technology that enables trains to run closely together without physical connections through communication and automation systems.The paper addresses an adaptive polynomial approximation algorithm for the cooperative control of high-speed trains(HSTs)under virtual coupling.It aims to solve the cooperative tracking control problem of HST formation operations under various scenarios,including known and unknown parameters.To enable the HST formation system to achieve cooperative operation while ensuring an appropriate spacing distance,the tracking errors of displacement and speed throughout the entire operation converge to zero.The proposed control strategy focuses on adopting polynomial approximation to handle unknown parameters,which are estimated via adaptive laws.Additionally,the unknown parameters of the HSTs are estimated online through adaptive laws.Experimental results verify the effectiveness of this method.展开更多
An online experiment to acquire the interior noise of a China Railways High-speed （CRH） train showed that it wasmainly composed of middle-low frequency components and could not be described properly by linear or A-w...An online experiment to acquire the interior noise of a China Railways High-speed （CRH） train showed that it wasmainly composed of middle-low frequency components and could not be described properly by linear or A-weighted soundpressure level （SPL）. Thus, the appropriate way to evaluate the high-speed train interior noise is to use sound quality parameters,and the most important is loudness. To overcome the disadvantages of the existing loudness algorithms, a novel signal-adaptiveMoore loudness algorithm （AMLA） based on the equivalent rectangular bandwidth （ERB） spectrum was introduced. The valida-tion reveals that AMLA can obtain higher accuracy and efficiency, and the simulated dark red noise conforms best to thehigh-speed train interior noise by loudness and auditory assessment. The main loudness component of the interior noise is below27.6 ERB rate （erbr）, and the sound quality of the interior noise is relatively stable between 300-350 km/h. The specific loudnesscomponents among 12-15 erbr stay invariable throughout the acceleration or deceleration process while components among20-27 erbr are evidently speed related. The unusual random noise is effectively identified, which indicates that AMLA is anappropriate method for sound quality assessment of the high-speed train under both steady and transient conditions.展开更多
High-speed maglev trains will play an important role in the high-speed transportation system in the near future.However,under the conditions of strong magnetic fields and continuous operation,the actuators of the high...High-speed maglev trains will play an important role in the high-speed transportation system in the near future.However,under the conditions of strong magnetic fields and continuous operation,the actuators of the high-speed maglev train suspension system are prone to lose partial effectiveness,which makes the suspension control problem challenging.In addition,most existing fault-tolerant control(FTC)methods for suspension systems require linearization around the equilibrium points during the controller design or stability analysis.Therefore,from a practical perspective,this study presents a novel nonlinear FTC strategy with adaptive compensation for high-speed maglev train suspension systems.First,a nonlinear dynamic model of the suspension system based on join-structure is established and the actuator failures are described.Then,a nonlinear fault-tolerant suspension control law with an adaptive update law is designed to achieve stable suspension against partial actuator failure.The Lyapunov theory and extended Barbalat lemma are utilized to rigorously prove the closed-loop asymptotic stability even if there is partial actuator failure,without any approximation to the original nonlinear dynamics.Finally,hardware experimental results are included to demonstrate the effectiveness of the proposed approach.展开更多
A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a n...A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.展开更多
An adaptive finite element method for high-speed flow-structure interaction is pre- sented.The cell-centered finite element method is combined with an adaptive meshing technique to solve the Navier-Stokes equations fo...An adaptive finite element method for high-speed flow-structure interaction is pre- sented.The cell-centered finite element method is combined with an adaptive meshing technique to solve the Navier-Stokes equations for high-speed compressible flow behavior.The energy equation and the quasi-static structural equations for aerodynamically heated structures are solved by applying the Galerkin finite element method.The finite element formulation and computational procedure are de- scribed.Interactions between the high-speed flow,structural heat transfer,and deformation are studied by two applications of Mach 10 flow over an inclined plate,and Mach 4 flow in a channel.展开更多
The start-up current control of the high-speed brushless DC（HS-BLDC） motor is a challenging research topic. To effectively control the start-up current of the sensorless HS-BLDC motor, an adaptive control method is ...The start-up current control of the high-speed brushless DC（HS-BLDC） motor is a challenging research topic. To effectively control the start-up current of the sensorless HS-BLDC motor, an adaptive control method is proposed based on the adaptive neural network（ANN）inverse system and the two degrees of freedom（2-DOF） internal model controller（IMC）. The HS-BLDC motor is identified by the online least squares support vector machine（OLS-SVM） algorithm to regulate the ANN inverse controller parameters in real time. A pseudo linear system is developed by introducing the constructed real-time inverse system into the original HS-BLDC motor system. Based on the characteristics of the pseudo linear system, an extra closed-loop feedback control strategy based on the 2-DOF IMC is proposed to improve the transient response performance and enhance the stability of the control system. The simulation and experimental results show that the proposed control method is effective and perfect start-up current tracking performance is achieved.展开更多
Adaptive Delaunay triangulation is combined with the cell-centered upwinding algorithm to analyze inviscid high-speed compressible flow problems. The multidimensional dissipation scheme was developed and included in t...Adaptive Delaunay triangulation is combined with the cell-centered upwinding algorithm to analyze inviscid high-speed compressible flow problems. The multidimensional dissipation scheme was developed and included in the upwinding algorithm for unstructured triangular meshes to improve the computed shock wave resolution. The solution accuracy is further improved by coupling an error estimation procedure to a remeshing algorithm that generates small elements in regions with large change of solution gradients, and at the same time, larger elements in other regions. The proposed scheme is further extended to achieve higher-order spatial and temporal solution accuracy. Efficiency of the combined procedure is evaluated by analyzing supersonic shocks and shock propagation behaviors for both the steady and unsteady high-speed compressible flows.展开更多
Abstract： The mathematical model of a high-speed underwater vehicle getting catastrophe in the out-of-water course and a nonlinear sliding mode control with the adaptive backstepping approach for the catastrophic cou...Abstract： The mathematical model of a high-speed underwater vehicle getting catastrophe in the out-of-water course and a nonlinear sliding mode control with the adaptive backstepping approach for the catastrophic course are proposed. The speed change is large at the moment that the high-speed underwater vehicle launches out of the water to attack an air target. It causes motion parameter uncertainties and affects the precision attack ability. The trajectory angle dynamic characteristic is based on the description of the transformed state-coordinates, the nonlinear sliding mode control is designed to track a linear reference model. Furthermore, the adaptive backstepping control approach is utilized to improve the robustness against the unknown parameter uncertainties. With the proposed control of attitude tracking, the controlled navigational control system possesses the advantages of good transient performance and robustness to parametric uncertainties. These can be predicted and regulated through the design of a linear reference model that has the desired dynamic behavior for the trajectory of the high-speed underwater vehicle to attack its target. Finally, some digital simulation results show that the control system can be applied to a catastrophic course, and that it illustrates great robustness against system parameter uncertainties and external disturbances.展开更多
基金supported by the National Natural Science Foundation of China(Nos.12261131505,U2241274)the Russian Science Fund(No.23-49-00133)+3 种基金the Aeronautical Science Foundation of China(No.20240002053002)the Natural Science Basic Research Program of Shaanxi,China(No.2025JC-YBMS-005)the Key Research and Development Program of Shaanxi,China(No.2024GX-YBXM-037)the Basic Research Programs of Taicang,China(No.TC2024JC10)。
文摘As the main component of the aircraft leading edge,the radome is often the first to be hit by raindrops and cause structural damage when passing through a rain field.Rain resistant coating is usually applied to ensure the performance protection requirements.In order to clarify the rain erosion damage mechanism of radome coating and explore the influencing factors and mechanisms of coating material damage under different jet impact conditions,impact tests were conducted on three types of skin coating samples,and the damage mode was observed through electron microscopy characterization.The experimental results show that the typical morphology of rain erosion damage is annular surface peeling damage.The damage area and volume of the three coating samples increase with the continuous increase of raindrop impact velocity.The threshold velocity for initial damage to the coating is about 360 m/s;under the influence of the velocity component,the reduction in impact angle leads to a gradual reduction in the degree of damage to the sample.ABAQUS finite element simulation software was used to establish a constitutive model for coating rain erosion simulation and obtain the propagation law of stress waves during the impact process.The simulation results show that at the 75°impact angle,the jet impacts the surface of the specimen at different velocities,and as the impact velocity increases,the Mises equivalent stress on the surface shows an increasing trend,which is one of the main factors causing damage with increasing velocity.The effectiveness,rain erosion damage mode,and influencing mechanism of the model were verified based on the test results;the dynamic failure mechanism of the sample was further studied,and the stress propagation process at different impact angles was compared,revealing the influence mechanism and damage law of the impact angle on the high-speed raindrop impact of the material.
文摘This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.
基金Project(52372370)supported by the National Natural Science Foundation of ChinaProject(2023ZZTS0379)supported by the Graduate Student Independent Innovation Project of Central South University,ChinaProject(202206370058)supported by the China Scholarship Council。
文摘This paper proposes a passive control method to reduce peak values of slipstream and turbulent kinetic energy in a high-speed train wake by attaching vortex generators(VGs)onto the upper surface of the tail car.The impact of the VGs is assessed through the improved delayed detached eddy simulations(IDDES)after validating predictions against previous experimental measurements and other numerical predictions for the base case.The simulations indicate that strategically installed VGs can reduce the average slipstream velocity(U slipstream)and the upper limit of slipstream velocity(U_(slipstream,max))by~17%and~15%,respectively,as well as moving the peaks downstream by approximately train height,thus reducing the danger posed by slipstream to waiting passengers and trackside workers.Analysis shows that the wake turbulent kinetic energy diminishes as the vortex generators decelerate the downwash flow and reduce shear production in the wake.It is also found that the presence of VGs significantly impacts the flow on the upper surface near the tail by modifying the unsteady trailing longitudinal vortices through the formation of additional counter-rotating longitudinal vortices from the VGs.These latter vortices prevent the merging of vortical airflow around the trailing nose tip,which is otherwise induced by the longitudinal vortex of the train.They also reduce vortex intensity through cross-annihilation and cross diffusion as the wake advects downstream,limiting outwards advection through interaction with the image pair,and contributing to a decrease in the peak slipstream value.The method proposed offers a simple approach to wake control leading to significant slipstream benefits.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12393780,12032017,12302067)College Education Scientific Research Project of Hebei Province(Grant No.JZX2024006)Hebei Provincial S&T Program(Grant No.21567622 H).
文摘The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle box bearing failures.Therefore,it is extremely important to study the mechanism of axle box bearings.Firstly,the medium of thermal deformation establishes a coupling relationship between the system dynamics model and the thermal grid model,and then obtains the thermal force coupling model of the high-speed train axle box bearing.The coupling model is validated from the perspectives of system dynamics response and temperature response,proving its effectiveness in system dynamics response and temperature characteristic response.Comparing the coupling model with the dynamics model,it is found that thermal deformation complicates the dynamic re-sponse.Finally,using the Lundberg-Palmgren(L-P)bearing fatigue calculation method and damage accumu-lation theory,the bearing fatigue life is calculated,and it is found that thermal deformation deteriorates the bearing operating environment,reducing the bearing fatigue life.Finally,by comparing the bearing fatigue life under different working conditions,it is concluded that the faster the vehicle speed,the greater the load,and the smaller the initial radial clearance of the bearing,the fatigue life of the bearing is reduced.The shorter the lifespan.
文摘Research on high-speed railways is a relatively new yet highly significant field in Vietnam.Among its key components,train control signaling plays a critical role,as it directly affects various interconnected systems,including infrastructure,traction power supply,operational planning,and overall railway safety.This article focuses on evaluating the capacity of the line based on the types of signals suitable for high-speed railways that have been effectively implemented in several European countries and successfully adapted in China.The research and simulation are conducted using MATLAB software,a reliable and widely adopted tool in the scientific community.The findings demonstrate that under normal conditions,the European Railway Traffic Management System/European Train Control System(ERTMS/ETCS)Level 2 signaling can support up to 23.7485 trains/hour/direction.Meanwhile,ERTMS/ETCS Level 3 with full moving block can accommodate up to 30.8735 trains/hour/direction,and ERTMS/ETCS Level 3 with fixed virtual blocks up to 29.4694 trains/hour/direction.In emergency scenarios,ERTMS/ETCS Level 3 with full moving block reduces headway by 33.27%compared to CTCS Level 3,while ERTMS/ETCS Level 3 with fixed virtual blocks achieves a 28.78%reduction.Overall,the ERTMS/ETCS Level 3 emerges as a state-of-the-art signaling technology offering high capacity and operational efficiency,and is recommended as a forward-looking solution for future implementation in Vietnam.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12393783,12302067,12172235,52072249)Joint Funds of the National Natural Science Foundation of China(Grant No.U24A2003)+3 种基金College Education Scientific Research Project of Hebei Province(Grant No.JZX2024006)Central Guiding Local Scientific and Technological Development Funding Project(Grant No.246Z2206G)the Key Research Project of China State Railway Group Co.,Ltd.(Grant No.N2024T009)S&T Program of Hebei(Grant No.21567622H).
文摘As China's high-speed railway technology advances,high-speed trains have emerged as a pivotal mode of transportation,instrumental in facilitating passenger and freight mobility while fostering robust regional eco-nomic and trade interactions.Nonetheless,the safety of train operations remains a paramount concern,prompting extensive research into the dynamic behavior of critical components,which is essential to ensuring seamless and secure transportation services.This article commences by comprehensively reviewing the current landscape and evolutionary trajectory of dynamic model analysis for both traditional bearings and axle box bearings.Emphasis is placed on elucidating the profound influence of diverse bearing fault types on the system's kinematic state,alongside delving into the research methodologies employed in developing multi-physics field coupling models.Subsequently,it expounds on the content of investigations focusing on various wheel and track impairments,grounded in the dynamic modeling of the bearing vehicle coupling system.Concurrently,the intricate interplay between wheel-rail excitation and axle box bearing faults on the system's performance is elucidated.Concludingly,the article underscores the inadequacy of current multi-source fault diagnosis meth-odologies in tackling the intricacies of complex train operating environments,thereby highlighting its sig-nificance as a pressing and vital research agenda for the future.
基金sponsored by the National Natural Science Foundation of China(Grant No.52178100).
文摘The spatial offset of bridge has a significant impact on the safety,comfort,and durability of high-speed railway(HSR)operations,so it is crucial to rapidly and effectively detect the spatial offset of operational HSR bridges.Drive-by monitoring of bridge uneven settlement demonstrates significant potential due to its practicality,cost-effectiveness,and efficiency.However,existing drive-by methods for detecting bridge offset have limitations such as reliance on a single data source,low detection accuracy,and the inability to identify lateral deformations of bridges.This paper proposes a novel drive-by inspection method for spatial offset of HSR bridge based on multi-source data fusion of comprehensive inspection train.Firstly,dung beetle optimizer-variational mode decomposition was employed to achieve adaptive decomposition of non-stationary dynamic signals,and explore the hidden temporal relationships in the data.Subsequently,a long short-term memory neural network was developed to achieve feature fusion of multi-source signal and accurate prediction of spatial settlement of HSR bridge.A dataset of track irregularities and CRH380A high-speed train responses was generated using a 3D train-track-bridge interaction model,and the accuracy and effectiveness of the proposed hybrid deep learning model were numerically validated.Finally,the reliability of the proposed drive-by inspection method was further validated by analyzing the actual measurement data obtained from comprehensive inspection train.The research findings indicate that the proposed approach enables rapid and accurate detection of spatial offset in HSR bridge,ensuring the long-term operational safety of HSR bridges.
基金financially supported by the Swedish Transport Administration(Trafikverket)through the“Excellence Area 4”and FOI-BBT program(Grant Nos.BBT-2019-022 and BBT-TRV 2024/132497).
文摘Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may compromise their fatigue capacity.The most common structural design for railway noise barriers consists of vertical configurations of posts and panels.However,there have been few dynamic analyses of steel post/wood panel noise barriers under train-induced aerodynamic loads.This study used dynamic finite element analysis to assess the dynamic behavior of such noise barriers.Analysis of a 40-m-long noise barrier model and a triangular simplified load model,the latter of which effectively represented the detailed aerodynamic load,were first used to establish the model and input of the moving load during dynamic simulation.Then,the effects of different parameters on the dynamic response of the noise barrier were evaluated,including the damping ratio,the profile of the steel post,the span length of the panel,the barrier height,and the train speed.Gray relational analysis indicated that barrier height exhibited the highest correlations with the dynamic responses,followed by train speed,post profile,span length,and damping ratio.A reduction in the natural frequency and an increase in the train speed result in a higher peak response and more pronounced fluctuations between the nose and tail waves.The dynamic amplification factor(DAF)was found to be related to both the natural frequency and train speed.A model was proposed showing that the DAF significantly increases as the square of the natural frequency decreases and the cube of the train speed rises.
基金supported by the National Key Research and Development Program of China(2022YFA1404800)National Natural Science Foundation of China(12174107,12004221,12192254,92250304,W2441005,12334014,12192251)+4 种基金Natural Science Foundation of Shandong Province(ZR2024QA024,ZR2021ZD02)Postdoctoral Innovation Talents Support Program of Shandong Province(No.SDBX2019005)Shanghai Municipal Science and Technology Major ProjectFundamental Research Funds for the Central UniversitiesEngineering Research Center for Nanophotonics&Advanced Instrument,Ministry of Education,East China Normal University(No.2023nmc005)。
文摘We demonstrate a high-speed rotating slit beam shaping method for femtosecond(fs)laser three-dimensional(3D)isotropic inscription in glass materials.By integrating fs laser direct writing with a real-time rotating slit mechanism,a 3D symmetric spherical focal field distribution is created in the laser-irradiated regions of transparent substrates.The corresponding focal field distribution is theoretically calculated and validated by examining the features of laser-inscribed lines in glass samples.Moreover,we investigate the influences of laser writing speed and slit rotational speed on the fabrication resolution in glass,and discuss the formation mechanism of the generated periodic microstructures.To showcase its powerful capability for3D isotropic fabrication,the high-speed rotating slit beam shaping method is applied to create straight optical waveguides,bending optical waveguides,and hollow microchannels in the glass.The proposed method holds great potential for the facile manufacture of diverse 3D isotropic microstructures and devices within transparent materials across various applications,including advanced photonics,microoptics,micro-electromechanical systems,and microfluidics.
基金funded by Nanjing University of Posts and Telecommunications Humanities and Social Sciences Research Fund Project(NYY222055)Special research project on teaching reform of innovation and entrepreneurship education in Nanjing University of Posts and Telecommunications(GCSJG202528)+2 种基金General Subject of Educational Science Planning in Jiangsu Province(C/2024/01/76)General project of educational science research in Shanghai(C24288)Key funded project of Shandong Vocational Education Teaching Reform Research in 2022(2022052).
文摘Background:As an important indicator of subjective well-being(SWB),decent work is a key guarantee for the sustainable development of teachers and their psychological health and work quality.Faced with the rapid development of artificial intelligence and the global labor market,vocational college teachers are facing challenges such as workload pressure and limited career development,which may harm their well-being.This study aims to localize the measurement method of decent work in Chinese vocational education based on the theory of the Psychology of Working Theory,and explore the relationship mechanism between organizational support,career adaptability,decent work,and job satisfaction among vocational college teachers.Methods:A cross-sectional survey was conducted with 422 HVCU teachers in China(202 male,220 female)using the localized Perceived Organizational Support Scale,Career Adaptability Scale,Decent Work Scale,and Job Satisfaction Scale.Results:The overall level of HVCU teachers’decent work was above the median(Mean=4.09,SD=0.69),laying a foundation for their SWB.Decent work significantly and positively predicted job satisfaction(β=0.620,p<0.001).Organizational support(r=0.58,p<0.001)and career adaptability(r=0.82,p<0.001)can positively affect decent work,and further improve job satisfaction(collective R2 rising from 38.3%to 41.1%).Bootstrap analysis confirmed these mediating effects were robust.Conclusions:This study confirms that the combined effects of organizational support and career adaptability can enhance decent work,further improving teachers’job satisfaction and subsequent subjective well-being.Besides,this study provides an empirical basis for improving the well-being of higher vocational teachers and the sustainable development of vocational education,and has practical significance for improving the teacher incentive policy.
基金supported by NARI Relays Electric Co.,Ltd.under the Project“Research on Evaluation of Clearing Results and Switching Criteria for Primary-Backup Systems in Electricity SpotMarkets”(Project No.CGSQ240800443).
文摘The construction of spot electricity markets plays a pivotal role in power system reforms,where market clearing systems profoundly influence market efficiency and security.Current clearing systems predominantly adopt a single-system architecture,with research focusing primarily on accelerating solution algorithms through techniques such as high-efficiency parallel solvers and staggered decomposition of mixed-integer programming models.Notably absent are systematic studies evaluating the adaptability of primary-backup clearing systems incontingency scenarios—a critical gap given redundant systems’expanding applications in operational environments.This paper proposes a comprehensive evaluation framework for analyzing dual-system adaptability,demonstrated through an in-depth case study of the Inner Mongolia power market.First,we establish the innovative“Dual-Active Heterogeneous”architecture that enables independent parallelized operation and fault-isolated redundancy.Subsequently,key performance indices are quantitatively evaluated across four critical dimensions:unit commitment decisions,generator output constraints,transmission section congestion patterns,and clearing price formation mechanisms.An integrated fuzzy evaluation methodology incorporating grey relational analysis is employed for objective indicator weighting,enabling systematic quantification of system superiority under specific grid operating states.Empirical results based on actual operational data from 200 generation units demonstrate the framework’s efficacy in guiding optimal system selection,with particularly strong performance observed during peak load periods.The proposed approach shows high generalization potential for other regional markets employing redundant clearing mechanisms—particularly those with increasing renewable penetration and associated uncertainty.
基金Under the auspices of Heilongjiang Provincial Natural Science Foundation of China(No.YQ2024D012),National Natural Science Foundation of China(No.42071162,42101165,42501220)。
文摘Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along the Primorsky No.1 and No.2 transportation corridors.First,the evaluation of urban accessibility level with and without Primorsky No.1 and No.2 high-speed rails(HSRs)opening was conducted with two indicators,i.e.,the weighted average travel time,and the economic potential.After the evaluation,the spatial differentiation pattern of the accessibility changes with and without Primorsky No.1 and No.2 HSRs opening was performed respectively using ArcGIS.On these bases,the regional spatial effects brought by Primorsky No.1 and No.2 HSRs opening were studied.The results are as following.First,the urban accessibility level will be greatly improved by the opening of Primorsky No.1 and No.2 HSRs.All adjacent cities will be integrated into‘1 h HSR communication circle’and the whole journey will be integrated into‘4 h HSR communication circle’along Primorsky No.1 and No.2 corridors,respectively.The HSR accessibility of Primorsky No.1 corridor is stronger than that of Primorsky No.2 corridor.But the HSR accessibility improvement degree of Primorsky No.1 corridor is weaker than that of Primorsky No.2 corridor.Second,spatially,along Primorsky No.1 and No.2 corridors,the HSR accessibility level of the cities which are located in China is stronger than those cities located in Russia,showing the‘High West,Low East’patterns.The HSR accessibility improvement degree of the cities which are located in Russia and Sino-Russian border is stronger than those cities located in China,showing the‘High East,Low West’patterns.Third,Primorsky No.1 and No.2 corridors could connect the China’s‘Heilongjiang Land Sea Silk Road Economic Belt’and‘Changchun-Jilin-Tumen Development Pilot Zone’respectively,gradually involving into the development of China’s Harbin-Changchun Megalopolis.Relying on Harbin(China)and Changchun(China),Primorsky No.1 and No.2 HSRs could connect Northeast China-Beijing HSR,accelerating the diffusion of population,economy and other flows from China’s Beijing-Tianjin-Hebei Urban Agglomeration to Northeast China,and then to Russia’s Far East Federal District.Relying on Suifenhe(China)and Hunchun(China),Primorsky No.1 and No.2 HSRs could be conducive to the development of the second largest sea channels for Northeast China,creating the Northeast Asian Urban Belt,and new sea-rail intermodal pattern among China,Russia,Democratic People’s Republic of Korea,Japan and Republic of Korea.Relying on Vladivostok(Russia)and Zarubino(Russia),Primorsky No.1 and No.2 corridors could connect the‘Ice Silk Road’,building the‘Sino-Russian Northern Maritime Corridor’and‘Sino-Russian Arctic Blue Economic Areas’.
基金supported in part by the National Natural Science Foundation of China(Grant Nos.62203246 and 62003127)Shandong Provincial Natural Science Foundation(Grant No.ZR2024QF041)the Natural Science Foundation of Hebei Province(Grant No.F2023202060)。
文摘Virtual coupling is a novel technology that enables trains to run closely together without physical connections through communication and automation systems.The paper addresses an adaptive polynomial approximation algorithm for the cooperative control of high-speed trains(HSTs)under virtual coupling.It aims to solve the cooperative tracking control problem of HST formation operations under various scenarios,including known and unknown parameters.To enable the HST formation system to achieve cooperative operation while ensuring an appropriate spacing distance,the tracking errors of displacement and speed throughout the entire operation converge to zero.The proposed control strategy focuses on adopting polynomial approximation to handle unknown parameters,which are estimated via adaptive laws.Additionally,the unknown parameters of the HSTs are estimated online through adaptive laws.Experimental results verify the effectiveness of this method.
基金supported by the Fundamental Research Funds for the Central Universities(No.2016QNA4012),China
文摘An online experiment to acquire the interior noise of a China Railways High-speed （CRH） train showed that it wasmainly composed of middle-low frequency components and could not be described properly by linear or A-weighted soundpressure level （SPL）. Thus, the appropriate way to evaluate the high-speed train interior noise is to use sound quality parameters,and the most important is loudness. To overcome the disadvantages of the existing loudness algorithms, a novel signal-adaptiveMoore loudness algorithm （AMLA） based on the equivalent rectangular bandwidth （ERB） spectrum was introduced. The valida-tion reveals that AMLA can obtain higher accuracy and efficiency, and the simulated dark red noise conforms best to thehigh-speed train interior noise by loudness and auditory assessment. The main loudness component of the interior noise is below27.6 ERB rate （erbr）, and the sound quality of the interior noise is relatively stable between 300-350 km/h. The specific loudnesscomponents among 12-15 erbr stay invariable throughout the acceleration or deceleration process while components among20-27 erbr are evidently speed related. The unusual random noise is effectively identified, which indicates that AMLA is anappropriate method for sound quality assessment of the high-speed train under both steady and transient conditions.
基金supported by the National Natural Science Foundation of China(Nos.52272374 and 52072269)the Shanghai Soft Science Research Project(No.22692194800)the Fundamental Research Funds for the Central Universities,China.
文摘High-speed maglev trains will play an important role in the high-speed transportation system in the near future.However,under the conditions of strong magnetic fields and continuous operation,the actuators of the high-speed maglev train suspension system are prone to lose partial effectiveness,which makes the suspension control problem challenging.In addition,most existing fault-tolerant control(FTC)methods for suspension systems require linearization around the equilibrium points during the controller design or stability analysis.Therefore,from a practical perspective,this study presents a novel nonlinear FTC strategy with adaptive compensation for high-speed maglev train suspension systems.First,a nonlinear dynamic model of the suspension system based on join-structure is established and the actuator failures are described.Then,a nonlinear fault-tolerant suspension control law with an adaptive update law is designed to achieve stable suspension against partial actuator failure.The Lyapunov theory and extended Barbalat lemma are utilized to rigorously prove the closed-loop asymptotic stability even if there is partial actuator failure,without any approximation to the original nonlinear dynamics.Finally,hardware experimental results are included to demonstrate the effectiveness of the proposed approach.
基金Project(24A0006)supported by the Key Project of Scientific Research Fund of Hunan Provincial Department of Education,ChinaProject(2024JJ5430)supported by the Natural Science Foundation of Hunan Province,ChinaProjects(2024JK2045,2023RC3061)supported by the Science and Technology Innovation Program of Hunan Province,China。
文摘A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.
基金The project supported by the Thailand Research Fund(TRF)
文摘An adaptive finite element method for high-speed flow-structure interaction is pre- sented.The cell-centered finite element method is combined with an adaptive meshing technique to solve the Navier-Stokes equations for high-speed compressible flow behavior.The energy equation and the quasi-static structural equations for aerodynamically heated structures are solved by applying the Galerkin finite element method.The finite element formulation and computational procedure are de- scribed.Interactions between the high-speed flow,structural heat transfer,and deformation are studied by two applications of Mach 10 flow over an inclined plate,and Mach 4 flow in a channel.
基金co-supported by the National Major Project for the Development and Application of Scientific Instrument Equipment of China (No. 2012YQ040235)
文摘The start-up current control of the high-speed brushless DC（HS-BLDC） motor is a challenging research topic. To effectively control the start-up current of the sensorless HS-BLDC motor, an adaptive control method is proposed based on the adaptive neural network（ANN）inverse system and the two degrees of freedom（2-DOF） internal model controller（IMC）. The HS-BLDC motor is identified by the online least squares support vector machine（OLS-SVM） algorithm to regulate the ANN inverse controller parameters in real time. A pseudo linear system is developed by introducing the constructed real-time inverse system into the original HS-BLDC motor system. Based on the characteristics of the pseudo linear system, an extra closed-loop feedback control strategy based on the 2-DOF IMC is proposed to improve the transient response performance and enhance the stability of the control system. The simulation and experimental results show that the proposed control method is effective and perfect start-up current tracking performance is achieved.
文摘Adaptive Delaunay triangulation is combined with the cell-centered upwinding algorithm to analyze inviscid high-speed compressible flow problems. The multidimensional dissipation scheme was developed and included in the upwinding algorithm for unstructured triangular meshes to improve the computed shock wave resolution. The solution accuracy is further improved by coupling an error estimation procedure to a remeshing algorithm that generates small elements in regions with large change of solution gradients, and at the same time, larger elements in other regions. The proposed scheme is further extended to achieve higher-order spatial and temporal solution accuracy. Efficiency of the combined procedure is evaluated by analyzing supersonic shocks and shock propagation behaviors for both the steady and unsteady high-speed compressible flows.
基金supported by Hubei Provincial Natural Science Foundation of China(No.2012FFC09401)
文摘Abstract： The mathematical model of a high-speed underwater vehicle getting catastrophe in the out-of-water course and a nonlinear sliding mode control with the adaptive backstepping approach for the catastrophic course are proposed. The speed change is large at the moment that the high-speed underwater vehicle launches out of the water to attack an air target. It causes motion parameter uncertainties and affects the precision attack ability. The trajectory angle dynamic characteristic is based on the description of the transformed state-coordinates, the nonlinear sliding mode control is designed to track a linear reference model. Furthermore, the adaptive backstepping control approach is utilized to improve the robustness against the unknown parameter uncertainties. With the proposed control of attitude tracking, the controlled navigational control system possesses the advantages of good transient performance and robustness to parametric uncertainties. These can be predicted and regulated through the design of a linear reference model that has the desired dynamic behavior for the trajectory of the high-speed underwater vehicle to attack its target. Finally, some digital simulation results show that the control system can be applied to a catastrophic course, and that it illustrates great robustness against system parameter uncertainties and external disturbances.
