A 72-h high-resolution simulation of Supertyphoon Rammasun （2014） is performed using the Advanced Research Weather Research and Forecasting model. The model covers an initial 18-h spin-up, the 36-h rapid intensifica...A 72-h high-resolution simulation of Supertyphoon Rammasun （2014） is performed using the Advanced Research Weather Research and Forecasting model. The model covers an initial 18-h spin-up, the 36-h rapid intensification （RI） period in the northern South China Sea, and the 18-h period of weakening after landfall. The results show that the model reproduces the track, intensity, structure of the storm, and environmental circulations reasonably well. Analysis of the surface energetics under the storm indicates that the storm＇s intensification is closely related to the net energy gain rate （eg）, defined as the difference between the energy production （PD） due to surface entropy flux and the energy dissipation （Ds） due to surface friction near the radius of maximum wind （RMW）. Before and during the RI stage, the ~：g is high, indicating sufficient energy supply for the storm to intensify. However, the Sg decreases rapidly as the storm quickly intensifies, because the Ds increases more rapidly than the PD near the RMW. By the time the storm reaches its peak intensity, the Ds is about 20% larger than the PD near the RMW, leading to a local energetics deficit under the eyewall. During the mature stage, the PD and Ds can reach a balance within a radius of 86 km from the storm center （about 2.3 times the RMW）. This implies that the local PD under the eyewall is not large enough to balance the Ds, and the radially inward energy transport from outside the eyewall must play an important role in maintaining the storm＇s intensity, as well as its intensification.展开更多
This paper presents a high-resolution simulation of a remarkable polar low observed over the Sea of Japan on 21 January 1997 by using a 5-km mesh non-hydrostatic model MRI-NHM (Meteorological Research Institute Non-Hy...This paper presents a high-resolution simulation of a remarkable polar low observed over the Sea of Japan on 21 January 1997 by using a 5-km mesh non-hydrostatic model MRI-NHM (Meteorological Research Institute Non-Hydrostatic Model). A 24-hour simulation starting from 0000 UTC 21 January 1997 successfully reproduced the observed features of the polar low such as the wrapping of western part of an initial E-W orientation vortex, the spiral-shaped bands, the cloud-free 'eye', and the warm core structure at its mature stage. The 'eye' of the simulated polar low was relatively dry, and was associated with a strong downdraft. A thermodynamic budget analysis indicates that the 'warm core' in the 'eye' region was mainly caused by the adiabatic warming associated with the downdraft. The relationship among the condensational diabatic heating, the vertical velocity, the convergence of the moisture flux, and the circulation averaged within a 50 km×50 km square area around the polar low center shows that they form a positive feedback loop, and this loop is not inconsistent with the CISK (Conditional Instability of the Second Kind) mechanism during the developing stage of the polar low.展开更多
Submesoscale processes in marginal seas usually have complex generating mechanisms,highly dependent on the local background flow and forcing.This numerical study investigates the spatial and seasonal differences of su...Submesoscale processes in marginal seas usually have complex generating mechanisms,highly dependent on the local background flow and forcing.This numerical study investigates the spatial and seasonal differences of submesoscale activities in the upper ocean of the South China Sea(SCS)and the different dynamical regimes for sub-regions.The spatial and seasonal variations of vertical vorticity,horizontal convergence,lateral buoyancy gradient,and strain rate are analyzed to compare the submesoscale phenomenon within four sub-regions,the northern region near the Luzon Strait(R1),the middle ocean basin(R2),the western SCS(R3),and the southern SCS(R4).The results suggest that the SCS submesoscale processes are highly heterogeneous in space,with different seasonalities in each sub-region.The submesoscale activities in the northern sub-regions(R1,R2)are active in winter but weak in summer,while there appears an almost seasonal anti-phase in the western region(R3)compared to R1 and R2.Interestingly,no clear seasonality of submesoscale features is shown in the southern region(R4).Further analysis of Ertel potential vorticity reveals different generating mechanisms of submesoscale processes in different sub-regions.Correlation analyses also show the vertical extent of vertical velocity and the role of monsoon in generating submesoscale activities in the upper ocean of sub-regions.All these results suggest that the sub-regions have different regimes for submesoscale processes,e.g.,Kuroshio intrusion(R1),monsoon modulation(R2),frontal effects(R3),topography wakes(R4).展开更多
A comparison study is performed to contrast the improvements in the tropical Pacific oceanic state of a low-resolution model respectively via data assimilation and by an increase in horizontal resolution. A low resolu...A comparison study is performed to contrast the improvements in the tropical Pacific oceanic state of a low-resolution model respectively via data assimilation and by an increase in horizontal resolution. A low resolution model (LR) (1°lat by 2°lon) and a high-resolution model (HR) (0.5°lat by 0.5°lon) are employed for the comparison. The authors perform 20-yr numerical experiments and analyze the annual mean fields of temperature and salinity. The results indicate that the low-resolution model with data assimilation behaves better than the high-resolution model in the estimation of ocean large-scale features. From 1990 to 2000, the average of HR's RMSE (root-mean-square error) relative to independent Tropical Atmosphere Ocean project (TAO) mooring data at randomly selected points is 0.97℃ compared to a RMSE of 0.56℃ for LR with temperature assimilation. Moreover, the LR with data assimilation is more frugal in computation. Although there is room to improve the high-resolution model, the low-resolution model with data assimilation may be an advisable choice in achieving a more realistic large-scale state of the ocean at the limited level of information provided by the current observational system.展开更多
In oceanic and atmospheric science,finer resolutions have become a prevailing trend in all aspects of development.For high-resolution fluid flow simulations,the computational costs of widely used numerical models incr...In oceanic and atmospheric science,finer resolutions have become a prevailing trend in all aspects of development.For high-resolution fluid flow simulations,the computational costs of widely used numerical models increase significantly with the resolution.Artificial intelligence methods have attracted increasing attention because of their high precision and fast computing speeds compared with traditional numerical model methods.The resolution-independent Fourier neural operator(FNO)presents a promising solution to the still challenging problem of high-resolution fluid flow simulations based on low-resolution data.Accordingly,we assess the potential of FNO for high-resolution fluid flow simulations using the vorticity equation as an example.We assess and compare the performance of FNO in multiple high-resolution tests varying the amounts of data and the evolution durations.When assessed with finer resolution data(even up to number of grid points with 1280×1280),the FNO model,trained at low resolution(number of grid points with 64×64)and with limited data,exhibits a stable overall error and good accuracy.Additionally,our work demonstrates that the FNO model takes less time than the traditional numerical method for high-resolution simulations.This suggests that FNO has the prospect of becoming a cost-effective and highly precise model for high-resolution simulations in the future.Moreover,FNO can make longer high-resolution predictions while training with less data by superimposing vorticity fields from previous time steps as input.A suitable initial learning rate can be set according to the frequency principle,and the time intervals of the dataset need to be adjusted according to the spatial resolution of the input when training the FNO model.Our findings can help optimize FNO for future fluid flow simulations.展开更多
Accurately counting dense objects in complex and diverse backgrounds is a significant challenge in computer vision,with applications ranging from crowd counting to various other object counting tasks.To address this,w...Accurately counting dense objects in complex and diverse backgrounds is a significant challenge in computer vision,with applications ranging from crowd counting to various other object counting tasks.To address this,we propose HUANNet(High-Resolution Unified Attention Network),a convolutional neural network designed to capture both local features and rich semantic information through a high-resolution representation learning framework,while optimizing computational distribution across parallel branches.HUANNet introduces three core modules:the High-Resolution Attention Module(HRAM),which enhances feature extraction by optimizing multiresolution feature fusion;the Unified Multi-Scale Attention Module(UMAM),which integrates spatial,channel,and convolutional kernel information through an attention mechanism applied across multiple levels of the network;and the Grid-Assisted Point Matching Module(GPMM),which stabilizes and improves point-to-point matching by leveraging grid-based mechanisms.Extensive experiments show that HUANNet achieves competitive results on the ShanghaiTech Part A/B crowd counting datasets and sets new state-of-the-art performance on dense object counting datasets such as CARPK and XRAY-IECCD,demonstrating the effectiveness and versatility of HUANNet.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Background:Diabetic foot,a severe complication of diabetes,is characterized by chronic refractory wounds.Sanhuang Oil,a topical herbal formula,demonstrates significant therapeutic effects including antibacterial,anti-...Background:Diabetic foot,a severe complication of diabetes,is characterized by chronic refractory wounds.Sanhuang Oil,a topical herbal formula,demonstrates significant therapeutic effects including antibacterial,anti-inflammatory,and immunomodulatory activities.However,its active constituents and mechanisms of action against diabetic foot remain to be elucidated.Methods:In this study,the chemical constituents of Sanhuang Oil were identified using UPLC-QE-Orbitrap-MS.Subsequently,the mechanism by which Sanhuang Oil promotes diabetic foot ulcer healing was predicted by integrating network pharmacology and molecular docking.Additionally,diabetic mouse model was established in ICR mice using a combination of a high-fat diet(HFD)and streptozotocin(STZ)chemical induction.A full-thickness skin defect was created on the dorsum of the mice.Wound healing and the healing rate were observed following Sanhuang Oil intervention.The mechanism underlying Sanhuang Oil’s promotion of diabetic ulcer healing was further investigated using transcriptomics and histopathological examination(H&E staining).Results:A total of 97 active ingredients were identified from Sanhuang Oil.Network pharmacology analysis predicted 543 common targets,and Kyoto Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis identified 203 relevant pathways.Molecular docking further confirmed high binding affinity(binding energy≤−5.0 kcal/mol)between specific active components in Sanhuang Oil(e.g.,coptisine,phellodendrine,baicalein)and key targets associated with diabetic foot ulcers(e.g.,EGFR,AKT1,STAT3).In vivo experimental results demonstrated that the wound healing rate was significantly higher in Sanhuang Oil-treated groups compared to the model group(P<0.001).HE staining revealed that the high-dose Sanhuang Oil group exhibited more pronounced epithelial tissue coverage over the wound,reduced inflammatory cell infiltration,and increased collagen deposition and fibroblast proliferation.transcriptomic analysis identified Pdk4,Ttn,Csrp3,Actn2,Myoz2,Tnnc2,Myod1,Myog,Myot,and Myf6 as key regulatory proteins involved in promoting wound healing.Conclusion:Sanhuang Oil promotes wound healing in diabetic ulcer mice,potentially by mitigating inflammation and regulating key targets such as Pdk4 to enhance fibroblast function.These findings provide novel insights into the multi-target,multi-pathway mechanism of Sanhuang Oil for treating diabetic foot ulcers.展开更多
The Ordos Basin is a large superimposed hydrocarbon-bearing basin in China,and further research on the sedimentary characteristics and sedimentary evolution of the sequence framework of target layers is of great theor...The Ordos Basin is a large superimposed hydrocarbon-bearing basin in China,and further research on the sedimentary characteristics and sedimentary evolution of the sequence framework of target layers is of great theoretical and practical significance for guiding oil and gas exploration.The sedimentary facies and sedimentary evolution of the high-resolution sequence framework of the Carboniferous Taiyuan Formation in the Hangjinqi area have been systematically analyzed for the first time by drilling,logging and seismic data.The results show that four types of sequence interfaces can be identified in the Taiyuan Formation:regional unconformity surfaces,scour surfaces,lithologic-lithofacies transformation surfaces and flooding surfaces.According to the sedimentary response caused by the upward and downward movements of the base level at different levels,the Taiyuan Formation can be divided into 2 long-term cycles(LSC_(1)-LSC_(2)),4 mid-term cycles(MSC_(1)-MSC4)and 7 short-term cycles(SSC_(1)-SSC7).The long-and mid-term cycles correspond to members T_(1)and T_(2)and layers T_(1)-1,T_(1-2),T_(2-1),and T_(2)-2,respectively.Long-term cycles are dominated by C_(1);mid-term cycles are dominated by C_(1)and C_(2),followed by A2;and short-term cycles are dominated by C_(1),C_(2),A1 and A2.Under the high-resolution sequence stratigraphic framework,the Hangjinqi area underwent a transformation of fan delta and tidal flat depositional systems during the Taiyuan Formation sedimentary period.In the MSC_(1)-MSC_(2)stage,owing to a large-scale paleocontinent,the fan delta sedimentary body,which was limited in scale and scope,developed only in the southeastern corner and gradually transitioned basinward to tidal flat facies.In the MSC3-MSC4 stage,as the paleocontinent continuously decreased and the sedimentary range expanded,fan-delta plain sedimentation began in the study area.Several braided distributary channels with poor connectivity developed on the fan-delta plain,and between them were floodplains and peat swamps.展开更多
The F_(1)-ATPase and V_(1)-ATPase are rotary biomotors.Alignment of their amino acid sequences,which originate from bovine heart mitochondria(1BMF)and Enterococcus hirae(3VR6),respectively,demonstrates that the segmen...The F_(1)-ATPase and V_(1)-ATPase are rotary biomotors.Alignment of their amino acid sequences,which originate from bovine heart mitochondria(1BMF)and Enterococcus hirae(3VR6),respectively,demonstrates that the segment forming the ATP catalytic pocket is highly conserved.Single-molecule experiments,however,have revealed subtle differences in efficiency between the F_(1) and V_(1) motors.Here,we perform both atomistic and coarse-grained molecular dynamics simulations to investigate the mechanochemical coupling and coordination in F_(1) and V_(1) ATPase.Our results show that the correlation between conformational changes in F_(1) is stronger than that in V_(1),indicating that the mechanochemical coupling in F_(1) is tighter than in V_(1).Moreover,the unidirectional rotation of F_(1) is more processive than that of V_(1),which accounts for the higher efficiency observed in F_(1) and explains the occasional backward steps detected in single-molecule experiments on V_(1).展开更多
The rapid advancement of machine learning based tight-binding Hamiltonian(MLTB)methods has opened new avenues for efficient and accurate electronic structure simulations,particularly in large-scale systems and long-ti...The rapid advancement of machine learning based tight-binding Hamiltonian(MLTB)methods has opened new avenues for efficient and accurate electronic structure simulations,particularly in large-scale systems and long-time scenarios.This review begins with a concise overview of traditional tight-binding(TB)models,including both(semi-)empirical and first-principles approaches,establishing the foundation for understanding MLTB developments.We then present a systematic classification of existing MLTB methodologies,grouped into two major categories:direct prediction of TB Hamiltonian elements and inference of empirical parameters.A comparative analysis with other ML-based electronic structure models is also provided,highlighting the advancement of MLTB approaches.Finally,we explore the emerging MLTB application ecosystem,highlighting how the integration of MLTB models with a diverse suite of post-processing tools from linear-scaling solvers to quantum transport frameworks and molecular dynamics interfaces is essential for tackling complex scientific problems across different domains.The continued advancement of this integrated paradigm promises to accelerate materials discovery and open new frontiers in the predictive simulation of complex quantum phenomena.展开更多
Vitrimers belong to a class of polymeric materials capable of bond exchange reactions,showing great promise for environmental protection and sustainable development.However,studies on the coupling mechanism between th...Vitrimers belong to a class of polymeric materials capable of bond exchange reactions,showing great promise for environmental protection and sustainable development.However,studies on the coupling mechanism between the bond exchange kinetics and segmental dynamics near the glass transition temperature(T_(g))remain scarce.Herein,we employed molecular dynamics simulations to investigate the dynamic heterogeneity of the segment motion and bond exchange in vitrimers.The simulation results revealed that the bond exchange energy barrier exerts a much stronger influence on the bond exchange kinetics than on the segmental dynamics.At lower temperatures,slower segmental relaxation further constraind the bond exchange rate.Additionally,increasing the bond exchange energy barrier markedly enhanced the dynamic heterogeneity of segment motion.A close correlation was observed between heterogeneity and bond exchange.This study elucidated the coupling mechanism between bond exchange and segmental dynamics at the molecular scale,thereby providing a theoretical basis for designing vitrimer materials with tunable dynamic properties.展开更多
In federated learning,backdoor attacks have become an important research topic with their wide application in processing sensitive datasets.Since federated learning detects or modifies local models through defense mec...In federated learning,backdoor attacks have become an important research topic with their wide application in processing sensitive datasets.Since federated learning detects or modifies local models through defense mechanisms during aggregation,it is difficult to conduct effective backdoor attacks.In addition,existing backdoor attack methods are faced with challenges,such as low backdoor accuracy,poor ability to evade anomaly detection,and unstable model training.To address these challenges,a method called adaptive simulation backdoor attack(ASBA)is proposed.Specifically,ASBA improves the stability of model training by manipulating the local training process and using an adaptive mechanism,the ability of the malicious model to evade anomaly detection by combing large simulation training and clipping,and the backdoor accuracy by introducing a stimulus model to amplify the impact of the backdoor in the global model.Extensive comparative experiments under five advanced defense scenarios show that ASBA can effectively evade anomaly detection and achieve high backdoor accuracy in the global model.Furthermore,it exhibits excellent stability and effectiveness after multiple rounds of attacks,outperforming state-of-the-art backdoor attack methods.展开更多
UHMWPE fibers exhibit impressive modulus and strength,but they have not reached their theoretical limits.Researchers focus on molecular weight,orientation,and crystallinity of UHMWPE,yet their contributions to mechani...UHMWPE fibers exhibit impressive modulus and strength,but they have not reached their theoretical limits.Researchers focus on molecular weight,orientation,and crystallinity of UHMWPE,yet their contributions to mechanical properties are unclear.Molecular dynamics simulations are valuable but often limited by computational constraints.Our aim is to simulate higher molecular weights to better represent real UHMWPE fibers.We used Packmol and Polyply methodologies to construct PE systems,with Polyply reproducing more reasonable properties of UHMWPE fibers.Additionally,tensile simulations showed that orientation and crystallinity greatly impact Young's modulus more than molecular weight.Energy decomposition indicated that higher molecular weights lead to covalent bonds that can withstand more energy during stretching,thus increasing breaking strength.Combining simulations with machine learning,we found that orientation has the most significant impact on Young's modulus,contributing 60%,and molecular weight plays the most crucial role in determining the breaking strength,accounting for 65%.This study provides a theoretical basis and guidelines for enhancing UHMWPE's modulus and strength.展开更多
In recent years,three-dimensional reconstruction technologies that employ multiple cameras have continued to evolve significantly,enabling remote collaboration among users in extended Reality(XR)environments.In additi...In recent years,three-dimensional reconstruction technologies that employ multiple cameras have continued to evolve significantly,enabling remote collaboration among users in extended Reality(XR)environments.In addition,methods for deploying multiple cameras for motion capture of users(e.g.,performers)are widely used in computer graphics.As the need to minimize and optimize the number of cameras grows to reduce costs,various technologies and research approaches focused on Optimal Camera Placement(OCP)are continually being proposed.However,as most existing studies assume homogeneous camera setups,there is a growing demand for studies on heterogeneous camera setups.For instance,technical demands keep emerging in scenarios with minimal camera configurations,especially regarding cost factors,the physical placement of cameras given the spatial structure,and image capture strategies for heterogeneous cameras,such as high-resolution RGB cameras and depth cameras.In this study,we propose a pre-visualization and simulation method for the optimal placement of heterogeneous cameras in XR environments,accounting for both the specifications of heterogeneous cameras(e.g.,field of view)and the physical configuration(e.g.,wall configuration)in real-world spaces.The proposed method performs a visibility analysis of cameras by considering each camera’s field-of-view volume,resolution,and unique characteristics,along with physicalspace constraints.This approach enables the optimal position and rotation of each camera to be recommended,along with the minimum number of cameras required.In the results of our study conducted in heterogeneous camera combinations,the proposed method achieved 81.7%~82.7%coverage of the target visual information using only 2~3 cameras.In contrast,single(or homogeneous)-typed cameras were required to use 11 cameras for 81.6%coverage.Accordingly,we found that camera deployment resources can be reduced with the proposed approaches.展开更多
Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted dru...Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.展开更多
基金supported by the National Basic Research and Development Project (973 program) of China (Grant No. 2015CB452805)the National Natural Science Foundation of China (Grant No. 41375068)partly supported by the National Science Foundation (Grant No. AGS-1326524)
文摘A 72-h high-resolution simulation of Supertyphoon Rammasun （2014） is performed using the Advanced Research Weather Research and Forecasting model. The model covers an initial 18-h spin-up, the 36-h rapid intensification （RI） period in the northern South China Sea, and the 18-h period of weakening after landfall. The results show that the model reproduces the track, intensity, structure of the storm, and environmental circulations reasonably well. Analysis of the surface energetics under the storm indicates that the storm＇s intensification is closely related to the net energy gain rate （eg）, defined as the difference between the energy production （PD） due to surface entropy flux and the energy dissipation （Ds） due to surface friction near the radius of maximum wind （RMW）. Before and during the RI stage, the ~：g is high, indicating sufficient energy supply for the storm to intensify. However, the Sg decreases rapidly as the storm quickly intensifies, because the Ds increases more rapidly than the PD near the RMW. By the time the storm reaches its peak intensity, the Ds is about 20% larger than the PD near the RMW, leading to a local energetics deficit under the eyewall. During the mature stage, the PD and Ds can reach a balance within a radius of 86 km from the storm center （about 2.3 times the RMW）. This implies that the local PD under the eyewall is not large enough to balance the Ds, and the radially inward energy transport from outside the eyewall must play an important role in maintaining the storm＇s intensity, as well as its intensification.
基金The first author was partly supported by the Chinese Ministry of Education,and the Japanese Ministry of Education,Science and Culture through their scholarship exchange programsthe National Natural Science Foundation of China under the Grant Nos.40275033 and 40240420564This work was also supported by the State Key Laboratory of Atmospheric Boundary Layer Physics and Atmospheric Chemistry(LAPC)of the Institute of Atmospheric Physics of the Chinese Academy of Sciences under Grant No.LAPC-KF-2003-10.
文摘This paper presents a high-resolution simulation of a remarkable polar low observed over the Sea of Japan on 21 January 1997 by using a 5-km mesh non-hydrostatic model MRI-NHM (Meteorological Research Institute Non-Hydrostatic Model). A 24-hour simulation starting from 0000 UTC 21 January 1997 successfully reproduced the observed features of the polar low such as the wrapping of western part of an initial E-W orientation vortex, the spiral-shaped bands, the cloud-free 'eye', and the warm core structure at its mature stage. The 'eye' of the simulated polar low was relatively dry, and was associated with a strong downdraft. A thermodynamic budget analysis indicates that the 'warm core' in the 'eye' region was mainly caused by the adiabatic warming associated with the downdraft. The relationship among the condensational diabatic heating, the vertical velocity, the convergence of the moisture flux, and the circulation averaged within a 50 km×50 km square area around the polar low center shows that they form a positive feedback loop, and this loop is not inconsistent with the CISK (Conditional Instability of the Second Kind) mechanism during the developing stage of the polar low.
基金The National Key Research and Development Program of China under contract No.2017YFA0604104the National Natural Science Foundation of China under contract Nos 42176004,92058201 and 41776040the Fundamental Research Funds for the Central Universities under contract No.B220202050.
文摘Submesoscale processes in marginal seas usually have complex generating mechanisms,highly dependent on the local background flow and forcing.This numerical study investigates the spatial and seasonal differences of submesoscale activities in the upper ocean of the South China Sea(SCS)and the different dynamical regimes for sub-regions.The spatial and seasonal variations of vertical vorticity,horizontal convergence,lateral buoyancy gradient,and strain rate are analyzed to compare the submesoscale phenomenon within four sub-regions,the northern region near the Luzon Strait(R1),the middle ocean basin(R2),the western SCS(R3),and the southern SCS(R4).The results suggest that the SCS submesoscale processes are highly heterogeneous in space,with different seasonalities in each sub-region.The submesoscale activities in the northern sub-regions(R1,R2)are active in winter but weak in summer,while there appears an almost seasonal anti-phase in the western region(R3)compared to R1 and R2.Interestingly,no clear seasonality of submesoscale features is shown in the southern region(R4).Further analysis of Ertel potential vorticity reveals different generating mechanisms of submesoscale processes in different sub-regions.Correlation analyses also show the vertical extent of vertical velocity and the role of monsoon in generating submesoscale activities in the upper ocean of sub-regions.All these results suggest that the sub-regions have different regimes for submesoscale processes,e.g.,Kuroshio intrusion(R1),monsoon modulation(R2),frontal effects(R3),topography wakes(R4).
基金This study is supported by the Key Program of Chinese Academy of Sciences KZCX3 SW-221the National Natural Science Foundation of China(Grant No.40233033 and 40221503).
文摘A comparison study is performed to contrast the improvements in the tropical Pacific oceanic state of a low-resolution model respectively via data assimilation and by an increase in horizontal resolution. A low resolution model (LR) (1°lat by 2°lon) and a high-resolution model (HR) (0.5°lat by 0.5°lon) are employed for the comparison. The authors perform 20-yr numerical experiments and analyze the annual mean fields of temperature and salinity. The results indicate that the low-resolution model with data assimilation behaves better than the high-resolution model in the estimation of ocean large-scale features. From 1990 to 2000, the average of HR's RMSE (root-mean-square error) relative to independent Tropical Atmosphere Ocean project (TAO) mooring data at randomly selected points is 0.97℃ compared to a RMSE of 0.56℃ for LR with temperature assimilation. Moreover, the LR with data assimilation is more frugal in computation. Although there is room to improve the high-resolution model, the low-resolution model with data assimilation may be an advisable choice in achieving a more realistic large-scale state of the ocean at the limited level of information provided by the current observational system.
基金The National Natural Science Foundation of China under contract No.42425606the Basic Scientific Fund for the National Public Research Institute of China(Shu-Xingbei Young Talent Program)under contract No.2023S01+1 种基金the Ocean Decade International Cooperation Center Scientific and Technological Cooperation Project under contract No.GHKJ2024005China-Korea Joint Ocean Research Center Project under contract Nos PI-20240101(China)and 20220407(Korea).
文摘In oceanic and atmospheric science,finer resolutions have become a prevailing trend in all aspects of development.For high-resolution fluid flow simulations,the computational costs of widely used numerical models increase significantly with the resolution.Artificial intelligence methods have attracted increasing attention because of their high precision and fast computing speeds compared with traditional numerical model methods.The resolution-independent Fourier neural operator(FNO)presents a promising solution to the still challenging problem of high-resolution fluid flow simulations based on low-resolution data.Accordingly,we assess the potential of FNO for high-resolution fluid flow simulations using the vorticity equation as an example.We assess and compare the performance of FNO in multiple high-resolution tests varying the amounts of data and the evolution durations.When assessed with finer resolution data(even up to number of grid points with 1280×1280),the FNO model,trained at low resolution(number of grid points with 64×64)and with limited data,exhibits a stable overall error and good accuracy.Additionally,our work demonstrates that the FNO model takes less time than the traditional numerical method for high-resolution simulations.This suggests that FNO has the prospect of becoming a cost-effective and highly precise model for high-resolution simulations in the future.Moreover,FNO can make longer high-resolution predictions while training with less data by superimposing vorticity fields from previous time steps as input.A suitable initial learning rate can be set according to the frequency principle,and the time intervals of the dataset need to be adjusted according to the spatial resolution of the input when training the FNO model.Our findings can help optimize FNO for future fluid flow simulations.
基金funded by the National Natural Science Foundation of China(62273213,62472262,62572287)Natural Science Foundation of Shandong Province(ZR2024MF144)+1 种基金Natural Science Foundation of Shandong Province for Innovation and Development Joint Funds(ZR2022LZH001)Taishan Scholarship Construction Engineering.
文摘Accurately counting dense objects in complex and diverse backgrounds is a significant challenge in computer vision,with applications ranging from crowd counting to various other object counting tasks.To address this,we propose HUANNet(High-Resolution Unified Attention Network),a convolutional neural network designed to capture both local features and rich semantic information through a high-resolution representation learning framework,while optimizing computational distribution across parallel branches.HUANNet introduces three core modules:the High-Resolution Attention Module(HRAM),which enhances feature extraction by optimizing multiresolution feature fusion;the Unified Multi-Scale Attention Module(UMAM),which integrates spatial,channel,and convolutional kernel information through an attention mechanism applied across multiple levels of the network;and the Grid-Assisted Point Matching Module(GPMM),which stabilizes and improves point-to-point matching by leveraging grid-based mechanisms.Extensive experiments show that HUANNet achieves competitive results on the ShanghaiTech Part A/B crowd counting datasets and sets new state-of-the-art performance on dense object counting datasets such as CARPK and XRAY-IECCD,demonstrating the effectiveness and versatility of HUANNet.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
基金supported by the Natural Science Foundation of Hubei Provincial Department of Education(D20232101)Shandong Second Medical University 2024 Affiliated Hospital(Teaching Hospital)Scientific Research Development Fund Project(2024FYQ026)+3 种基金the innovative Research Programme of Xiangyang No.1 People’s Hospital(XYY2023ZY01)Faculty Development Grants of Xiangyang No.1 People’s Hospital Affiliated to Hubei University of Medicine(XYY2023D05)Joint supported by Hubei Provincial Natural Science Foundation and Xiangyang of China(2025AFD091)Traditional Chinese Medicine Scientific Research Project of Hubei Provincial Administration of Traditional Chinese Medicine(ZY2025D019).
文摘Background:Diabetic foot,a severe complication of diabetes,is characterized by chronic refractory wounds.Sanhuang Oil,a topical herbal formula,demonstrates significant therapeutic effects including antibacterial,anti-inflammatory,and immunomodulatory activities.However,its active constituents and mechanisms of action against diabetic foot remain to be elucidated.Methods:In this study,the chemical constituents of Sanhuang Oil were identified using UPLC-QE-Orbitrap-MS.Subsequently,the mechanism by which Sanhuang Oil promotes diabetic foot ulcer healing was predicted by integrating network pharmacology and molecular docking.Additionally,diabetic mouse model was established in ICR mice using a combination of a high-fat diet(HFD)and streptozotocin(STZ)chemical induction.A full-thickness skin defect was created on the dorsum of the mice.Wound healing and the healing rate were observed following Sanhuang Oil intervention.The mechanism underlying Sanhuang Oil’s promotion of diabetic ulcer healing was further investigated using transcriptomics and histopathological examination(H&E staining).Results:A total of 97 active ingredients were identified from Sanhuang Oil.Network pharmacology analysis predicted 543 common targets,and Kyoto Encyclopedia of Genes and Genomes(KEGG)pathway enrichment analysis identified 203 relevant pathways.Molecular docking further confirmed high binding affinity(binding energy≤−5.0 kcal/mol)between specific active components in Sanhuang Oil(e.g.,coptisine,phellodendrine,baicalein)and key targets associated with diabetic foot ulcers(e.g.,EGFR,AKT1,STAT3).In vivo experimental results demonstrated that the wound healing rate was significantly higher in Sanhuang Oil-treated groups compared to the model group(P<0.001).HE staining revealed that the high-dose Sanhuang Oil group exhibited more pronounced epithelial tissue coverage over the wound,reduced inflammatory cell infiltration,and increased collagen deposition and fibroblast proliferation.transcriptomic analysis identified Pdk4,Ttn,Csrp3,Actn2,Myoz2,Tnnc2,Myod1,Myog,Myot,and Myf6 as key regulatory proteins involved in promoting wound healing.Conclusion:Sanhuang Oil promotes wound healing in diabetic ulcer mice,potentially by mitigating inflammation and regulating key targets such as Pdk4 to enhance fibroblast function.These findings provide novel insights into the multi-target,multi-pathway mechanism of Sanhuang Oil for treating diabetic foot ulcers.
基金supported by the Fundamental Research Funds for the Liaoning Universities(Grant No.LJ202410166012).
文摘The Ordos Basin is a large superimposed hydrocarbon-bearing basin in China,and further research on the sedimentary characteristics and sedimentary evolution of the sequence framework of target layers is of great theoretical and practical significance for guiding oil and gas exploration.The sedimentary facies and sedimentary evolution of the high-resolution sequence framework of the Carboniferous Taiyuan Formation in the Hangjinqi area have been systematically analyzed for the first time by drilling,logging and seismic data.The results show that four types of sequence interfaces can be identified in the Taiyuan Formation:regional unconformity surfaces,scour surfaces,lithologic-lithofacies transformation surfaces and flooding surfaces.According to the sedimentary response caused by the upward and downward movements of the base level at different levels,the Taiyuan Formation can be divided into 2 long-term cycles(LSC_(1)-LSC_(2)),4 mid-term cycles(MSC_(1)-MSC4)and 7 short-term cycles(SSC_(1)-SSC7).The long-and mid-term cycles correspond to members T_(1)and T_(2)and layers T_(1)-1,T_(1-2),T_(2-1),and T_(2)-2,respectively.Long-term cycles are dominated by C_(1);mid-term cycles are dominated by C_(1)and C_(2),followed by A2;and short-term cycles are dominated by C_(1),C_(2),A1 and A2.Under the high-resolution sequence stratigraphic framework,the Hangjinqi area underwent a transformation of fan delta and tidal flat depositional systems during the Taiyuan Formation sedimentary period.In the MSC_(1)-MSC_(2)stage,owing to a large-scale paleocontinent,the fan delta sedimentary body,which was limited in scale and scope,developed only in the southeastern corner and gradually transitioned basinward to tidal flat facies.In the MSC3-MSC4 stage,as the paleocontinent continuously decreased and the sedimentary range expanded,fan-delta plain sedimentation began in the study area.Several braided distributary channels with poor connectivity developed on the fan-delta plain,and between them were floodplains and peat swamps.
基金supported by the National Natural Science Foundation of China(Grant Nos.22193032 and 32401033)the Research Fund of Wenzhou Institute,Chinese Academy of Sciences(Grant Nos.WIUCASQD2020009,WIUCASQD2023005,XSZD2024004,2021HZSY0061,and WIUCASICTP2022)。
文摘The F_(1)-ATPase and V_(1)-ATPase are rotary biomotors.Alignment of their amino acid sequences,which originate from bovine heart mitochondria(1BMF)and Enterococcus hirae(3VR6),respectively,demonstrates that the segment forming the ATP catalytic pocket is highly conserved.Single-molecule experiments,however,have revealed subtle differences in efficiency between the F_(1) and V_(1) motors.Here,we perform both atomistic and coarse-grained molecular dynamics simulations to investigate the mechanochemical coupling and coordination in F_(1) and V_(1) ATPase.Our results show that the correlation between conformational changes in F_(1) is stronger than that in V_(1),indicating that the mechanochemical coupling in F_(1) is tighter than in V_(1).Moreover,the unidirectional rotation of F_(1) is more processive than that of V_(1),which accounts for the higher efficiency observed in F_(1) and explains the occasional backward steps detected in single-molecule experiments on V_(1).
基金supported by the Advanced Materials-National Science and Technology Major Project(Grant No.2025ZD0618401)the National Natural Science Foundation of China(Grant No.12504285)+1 种基金the Natural Science Foundation of Jiangsu Province(Grant No.BK20250472)NFSG grant from BITS-Pilani,Dubai campus。
文摘The rapid advancement of machine learning based tight-binding Hamiltonian(MLTB)methods has opened new avenues for efficient and accurate electronic structure simulations,particularly in large-scale systems and long-time scenarios.This review begins with a concise overview of traditional tight-binding(TB)models,including both(semi-)empirical and first-principles approaches,establishing the foundation for understanding MLTB developments.We then present a systematic classification of existing MLTB methodologies,grouped into two major categories:direct prediction of TB Hamiltonian elements and inference of empirical parameters.A comparative analysis with other ML-based electronic structure models is also provided,highlighting the advancement of MLTB approaches.Finally,we explore the emerging MLTB application ecosystem,highlighting how the integration of MLTB models with a diverse suite of post-processing tools from linear-scaling solvers to quantum transport frameworks and molecular dynamics interfaces is essential for tackling complex scientific problems across different domains.The continued advancement of this integrated paradigm promises to accelerate materials discovery and open new frontiers in the predictive simulation of complex quantum phenomena.
基金financially supported by the National Natural Science Foundation of China(Nos.52173020 and 52573023)。
文摘Vitrimers belong to a class of polymeric materials capable of bond exchange reactions,showing great promise for environmental protection and sustainable development.However,studies on the coupling mechanism between the bond exchange kinetics and segmental dynamics near the glass transition temperature(T_(g))remain scarce.Herein,we employed molecular dynamics simulations to investigate the dynamic heterogeneity of the segment motion and bond exchange in vitrimers.The simulation results revealed that the bond exchange energy barrier exerts a much stronger influence on the bond exchange kinetics than on the segmental dynamics.At lower temperatures,slower segmental relaxation further constraind the bond exchange rate.Additionally,increasing the bond exchange energy barrier markedly enhanced the dynamic heterogeneity of segment motion.A close correlation was observed between heterogeneity and bond exchange.This study elucidated the coupling mechanism between bond exchange and segmental dynamics at the molecular scale,thereby providing a theoretical basis for designing vitrimer materials with tunable dynamic properties.
文摘In federated learning,backdoor attacks have become an important research topic with their wide application in processing sensitive datasets.Since federated learning detects or modifies local models through defense mechanisms during aggregation,it is difficult to conduct effective backdoor attacks.In addition,existing backdoor attack methods are faced with challenges,such as low backdoor accuracy,poor ability to evade anomaly detection,and unstable model training.To address these challenges,a method called adaptive simulation backdoor attack(ASBA)is proposed.Specifically,ASBA improves the stability of model training by manipulating the local training process and using an adaptive mechanism,the ability of the malicious model to evade anomaly detection by combing large simulation training and clipping,and the backdoor accuracy by introducing a stimulus model to amplify the impact of the backdoor in the global model.Extensive comparative experiments under five advanced defense scenarios show that ASBA can effectively evade anomaly detection and achieve high backdoor accuracy in the global model.Furthermore,it exhibits excellent stability and effectiveness after multiple rounds of attacks,outperforming state-of-the-art backdoor attack methods.
基金financially supported by the National Natural Science Foundation of China(Nos.52303298 and 52233002)。
文摘UHMWPE fibers exhibit impressive modulus and strength,but they have not reached their theoretical limits.Researchers focus on molecular weight,orientation,and crystallinity of UHMWPE,yet their contributions to mechanical properties are unclear.Molecular dynamics simulations are valuable but often limited by computational constraints.Our aim is to simulate higher molecular weights to better represent real UHMWPE fibers.We used Packmol and Polyply methodologies to construct PE systems,with Polyply reproducing more reasonable properties of UHMWPE fibers.Additionally,tensile simulations showed that orientation and crystallinity greatly impact Young's modulus more than molecular weight.Energy decomposition indicated that higher molecular weights lead to covalent bonds that can withstand more energy during stretching,thus increasing breaking strength.Combining simulations with machine learning,we found that orientation has the most significant impact on Young's modulus,contributing 60%,and molecular weight plays the most crucial role in determining the breaking strength,accounting for 65%.This study provides a theoretical basis and guidelines for enhancing UHMWPE's modulus and strength.
基金supported by the 2024 Research Fund of University of Ulsan.
文摘In recent years,three-dimensional reconstruction technologies that employ multiple cameras have continued to evolve significantly,enabling remote collaboration among users in extended Reality(XR)environments.In addition,methods for deploying multiple cameras for motion capture of users(e.g.,performers)are widely used in computer graphics.As the need to minimize and optimize the number of cameras grows to reduce costs,various technologies and research approaches focused on Optimal Camera Placement(OCP)are continually being proposed.However,as most existing studies assume homogeneous camera setups,there is a growing demand for studies on heterogeneous camera setups.For instance,technical demands keep emerging in scenarios with minimal camera configurations,especially regarding cost factors,the physical placement of cameras given the spatial structure,and image capture strategies for heterogeneous cameras,such as high-resolution RGB cameras and depth cameras.In this study,we propose a pre-visualization and simulation method for the optimal placement of heterogeneous cameras in XR environments,accounting for both the specifications of heterogeneous cameras(e.g.,field of view)and the physical configuration(e.g.,wall configuration)in real-world spaces.The proposed method performs a visibility analysis of cameras by considering each camera’s field-of-view volume,resolution,and unique characteristics,along with physicalspace constraints.This approach enables the optimal position and rotation of each camera to be recommended,along with the minimum number of cameras required.In the results of our study conducted in heterogeneous camera combinations,the proposed method achieved 81.7%~82.7%coverage of the target visual information using only 2~3 cameras.In contrast,single(or homogeneous)-typed cameras were required to use 11 cameras for 81.6%coverage.Accordingly,we found that camera deployment resources can be reduced with the proposed approaches.
文摘Because of the developed surface of the Triply PeriodicMinimumSurface(TPMS)structures,polylactide(PLA)products with a TPMS structure are thought to be promising bio soluble implants with the potential for targeted drug delivery.For implants,mechanical properties are key performance characteristics,so understanding the deformation and failure mechanisms is essential for selecting the appropriate implant structure.The deformation and fracture processes in PLA samples with different interior architectures have been studied through computer simulation and experimental research.Two TPMS topologies,the Schwarz Diamond and Gyroid architectures,were used for the sample construction by 3D printing.ANSYS software was utilized to simulate compressive deformation.It was found that under the same load,the vonMises stresses in the Gyroid structure are higher than those in the Schwartz Diamond structure,which was associated with the different orientations of the cells in the studied structures in relation to the direction of the loading axis.The deformation process occurs in the local regions of the studied TPMS structures.Maximum von Mises stresses were observed in the vertical parts of the structures oriented along the load direction.It was found that,unlike the Gyroid,the Schwartz Diamond structure contains a frame that forms unique stiffening ribs,which ensures the redistribution of the load under the vertical loading direction.An analysis of the mechanical characteristics of PLA samples with the Schwartz Diamond and Gyroid structures produced by the Fused Deposition Modeling(FDM)method was correlated with computer simulation.The Schwarz Diamond-type structure was shown to have a higher absorption energy than the Gyroid one.A study of the fracture in PLA samples with various cell sizes revealed a particular feature related to the samples’periodic surface topology and the 3D printing process.Scanning electron microscopic(SEM)studies of the samples deformed by compression showed thatwith an increase in the density of the samples,the failure mechanism changes from ductile to quasi-brittle due to the complex participation of both cell deformation and fiber deformation.
