Static corrections using the conventional method are basically conducted in two steps, the weathering correction followed by the correction from the top of the sub-weathering to the unified datum. However, the convent...Static corrections using the conventional method are basically conducted in two steps, the weathering correction followed by the correction from the top of the sub-weathering to the unified datum. However, the conventional method fails to well deal with statics problems in case the top of the sub-weathering is sharply undulated and the lateral velocity of the sub-weathering varies significantly. This brings us to the introduction of a smooth intermediate reference datum （IRD） located under the top of the sub-weathering, which helps to further increase the accuracy of statics based on the weathering corrections, and ensures the imaging quality. Good results based on the IRD technique have been achieved in the complex areas in western China. This paper discusses the IRD functions, its application requirements, and selection of related parameters. Some typical sections for comparison are also given in this paper.展开更多
Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China a...Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.展开更多
By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dyna...By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dynamics is introduced to present the local deformation effects due to reaction forces at kinematic joints.A space four bar mechanism is utilized here as an example to describe the method of selecting static correction modes.Compared with vibration normal modes, static correction modes are demonstrated to be effective in numerical simulation.展开更多
The inversion of TEM data, using the observed magnetic fields instead of that of apparent resistivities data in this paper, avoids the errors caused by the definition of the apparent resistivity. The inversed results...The inversion of TEM data, using the observed magnetic fields instead of that of apparent resistivities data in this paper, avoids the errors caused by the definition of the apparent resistivity. The inversed results by fitting the magnetic fields of the transmitter source's image with the observed magnetic fields are relatively less affected by the conductivity inhomogeneity. The MT apparent curve is calculated on the basis of the conductivity model constructed from the TEM inversion results. This curve is used as a reference curve for the correction of MT static shift, which makes the correction more reliable. Meanwhile, the domain transformation is also achieved from time to frequency between the two kinds of electromagnetic data. Therefore, the correction of the MT static shift is actualized using TEM inversion method. The corresponding application research shows that this method is very effective for the identification and correction of the MT static shift.展开更多
Reflection data in CMP has influenced seriously in static calculations,especially in some highly weathered and structurally altered circumstances. Because of static correction in the existed problems and requests,the ...Reflection data in CMP has influenced seriously in static calculations,especially in some highly weathered and structurally altered circumstances. Because of static correction in the existed problems and requests,the authors studied the angle dependent tomographic static correction,and discussed its basic theory, including the establishment of forward model,the calculation theory of tomography and tomographic static correction. The usage of theoretical models and practical information on the method has been validated. The results show that using these methods to calculate static correction in a complex area,the quality of static correction is greatly improved.展开更多
It is important and urgent to work out better statics correction methods to facilitate seismic prospecting. This paper presents a new method of statics correction calculation based on development of a seismic-gravity ...It is important and urgent to work out better statics correction methods to facilitate seismic prospecting. This paper presents a new method of statics correction calculation based on development of a seismic-gravity model of the near surface. Gravity interpretation includes determination of the local component caused by the near surface effects and calculation of the near-surface rock density by solving the linear inverse gravity problem. To obtain the near-surface velocities, priori seismic data such as time fields of the first waves recorded in the initial part of common depth point（CDP） seismograms are used. An optimal near-surface model is retrieved on the basis of the successive solution of the inverse and forward seismic problems, correlating with the observed seismic data. Matching of seismic and gravity model of the near surface yields the maximum coefficient of correlation between the values of velocities and densities. At the end of the interactive iterative process we get values of the near-surface seismic wave velocities, used for statics evaluation, and values of gravity anomalies, calculated with a variable density of the interbedded layer. The applications of the proposed method at geophysical exploration of oil and gas confirm the possibility of calculation of statics correction using the gravimetric data by constructing a coherent seismic-gravity model of the near surface.展开更多
The method of error correction is one of key techniques of parallel robot. A new method of end error correction of 6-HTRT parallel robot is presented for engineering and researching on correlative theory of 6-HTRT par...The method of error correction is one of key techniques of parallel robot. A new method of end error correction of 6-HTRT parallel robot is presented for engineering and researching on correlative theory of 6-HTRT parallel robot. The method need calculate many kinematics equations of parallel robot such as position back solution, velocity Jacobin, position forward solution and error Jacobin. New methods presented for solving these questions are simpler and fitter for programming and calculating, because former methods are too complex to use in engineering. These questions may be solved by iterative method of numerical value which has fast velocity of calculating. These new methods may be used in other mechanism of parallel robot too, and so have wider using value. The experimental results demonstrate that the system may satisfy entirely high technical request and fit for engineering in new measures.展开更多
An abnormality tends to occur in the productivity indicative curves in the process of productivity test interpretation of multi-layer gas wells,resulting in the failure of solutions to their productivity equations and...An abnormality tends to occur in the productivity indicative curves in the process of productivity test interpretation of multi-layer gas wells,resulting in the failure of solutions to their productivity equations and absolute open flow rates.To figure out the reasons for such an abnormality,we established a full-hole calculation model considering the coupling of wellbore variable mass flows and reservoir seepages to calculate a gas production profile and wellbore pressure distribution of a multi-layer productive gas reservoir.Then,based on the analysis of the gas production profile and wellbore pressure distribution characteristics of gas wells at different gas production rates,the root cause for the abnormality in the productivity indicative curves of multi-layer gas wells was analyzed,and a corresponding correction method was proposed and validated based on some examples.And the following research results were obtained.First,there are two reasons for the abnormal productivity indicative curves of multi-layer gas wells.On the one hand,there is a variable mass pipe flow in the wellbore of multi-layer sections and a flowing pressure gradient decreases with the increase of well depth.And the flowing pressure in the middle of the reservoir which is converted based on the flowing pressure gradient above the pressure gauge is higher than the real value.On the other hand,the pressure in the multi-layer producing sections doesn't realize a balance after well shutdown for a short time,so the measured static pressure is greater than the one measured when the pressure of each layer gets balanced after well shutdown for a long time.Second,the flowing pressure obtained from the productivity test interpretation of multi-layer gas producer shall be converted based on the pressure measured by the pressure gauge within 200 m above the reservoir top and it is necessary to adopt the static pressure measured after the balance of wellbore pressure.Third,the reliability of the model,the rationality of the abnormality reason analysis and the validity of the correction method are verified based on calculation examples and cases.It is concluded that the research results provide a technical support for the productivity evaluation of multi-layer gas wells.展开更多
Purpose–This study solves the key problem that the static level monitoring is susceptible to temperature interference and affects the accuracy in slope instability/deformation monitoring.The purpose is to develop a r...Purpose–This study solves the key problem that the static level monitoring is susceptible to temperature interference and affects the accuracy in slope instability/deformation monitoring.The purpose is to develop a reliable temperature compensation method for the system,improve the accuracy of slope stability monitoring and provide support for improving the safety and safety monitoring of engineering spoil slope and other projects.Design/methodology/approach–Combined with theoretical analysis and experimental verification,the temperature compensation method is explored.The working principle of the hydrostatic leveling monitoring system is analyzed and the data processing formula,the temperature error calculation formula and the calculation formula for eliminating the error settlement value are derived.The temperature compensation method is established and verified by the field test of the engineering spoil slope which is disturbed by a debris flow.Findings–The experimental results show that this method can reduce the error of the static level monitoring system by about 40%.The field test shows that the fluctuation of slope settlement monitoring value is reduced after temperature compensation and the monitoring value is consistent with the actual situation,which has certain practicability.Originality/value–The originality of this study is to derive a theoretical formula for quantifying/eliminating temperature errors in static leveling and to establish a practical temperature compensation method.The accuracy of the system is improved,which provides a reference for slope stability monitoring under complex environment(especially railway geotechnical engineering)and promotes the development of precision monitoring technology.展开更多
Regular expressions are widely used within and even outside of computer science due to their expressiveness and flexibility.However, regular expressions have a quite compact and rather tolerant syntax that makes them ...Regular expressions are widely used within and even outside of computer science due to their expressiveness and flexibility.However, regular expressions have a quite compact and rather tolerant syntax that makes them hard to understand, hard to compose,and error-prone. Faulty regular expressions may cause failures of the applications that use them. Therefore, ensuring the correctness of regular expressions is a vital prerequisite for their use in practical applications. The importance and necessity of ensuring correct definitions of regular expressions have attracted extensive attention from researchers and practitioners, especially in recent years. In this study, we provide a review of the recent works for ensuring the correct usage of regular expressions. We classify those works into different categories, including the empirical study, test string generation, automatic synthesis and learning, static checking and verification,visual representation and explanation, and repairing. For each category, we review the main results, compare different approaches, and discuss their advantages and disadvantages. We also discuss some potential future research directions.展开更多
文摘Static corrections using the conventional method are basically conducted in two steps, the weathering correction followed by the correction from the top of the sub-weathering to the unified datum. However, the conventional method fails to well deal with statics problems in case the top of the sub-weathering is sharply undulated and the lateral velocity of the sub-weathering varies significantly. This brings us to the introduction of a smooth intermediate reference datum （IRD） located under the top of the sub-weathering, which helps to further increase the accuracy of statics based on the weathering corrections, and ensures the imaging quality. Good results based on the IRD technique have been achieved in the complex areas in western China. This paper discusses the IRD functions, its application requirements, and selection of related parameters. Some typical sections for comparison are also given in this paper.
基金supported by the Foundation of Institute of Geology,Chinese Academy of Geological Sciences (No. J1315)the 3D Geological Mapping Project (No. D1204)the SinoProbe-02 project of China
文摘Statics are big challenges for the processing of deep reflection seismic data. In this paper several different statics solutions have been implemented in the processing of deep reflection seismic data in South China and their corresponding results have been compared in order to find proper statics solutions. Either statics solutions based on tomographic principle or combining the low-frequency components of field statics with the high-frequency ones of refraction statics can provide reasonable statics solutions for deep reflection seismic data in South China with very rugged surface topography, and the two statics solutions can correct the statics anomalies of both long spatial wavelengths and short ones. The surface-consistent residual static corrections can serve as the good compensations to the several kinds of the first statics solutions. Proper statics solutions can improve both qualities and reso- lutions of seismic sections, especially for the reflections of Moho in the upmost mantle.
文摘By use of the recursive formulation of flexible multibody system with closed loops,this paper studies the dynamic simulation of complicated multibody system.The conception of static correction modes in structural dynamics is introduced to present the local deformation effects due to reaction forces at kinematic joints.A space four bar mechanism is utilized here as an example to describe the method of selecting static correction modes.Compared with vibration normal modes, static correction modes are demonstrated to be effective in numerical simulation.
文摘The inversion of TEM data, using the observed magnetic fields instead of that of apparent resistivities data in this paper, avoids the errors caused by the definition of the apparent resistivity. The inversed results by fitting the magnetic fields of the transmitter source's image with the observed magnetic fields are relatively less affected by the conductivity inhomogeneity. The MT apparent curve is calculated on the basis of the conductivity model constructed from the TEM inversion results. This curve is used as a reference curve for the correction of MT static shift, which makes the correction more reliable. Meanwhile, the domain transformation is also achieved from time to frequency between the two kinds of electromagnetic data. Therefore, the correction of the MT static shift is actualized using TEM inversion method. The corresponding application research shows that this method is very effective for the identification and correction of the MT static shift.
文摘Reflection data in CMP has influenced seriously in static calculations,especially in some highly weathered and structurally altered circumstances. Because of static correction in the existed problems and requests,the authors studied the angle dependent tomographic static correction,and discussed its basic theory, including the establishment of forward model,the calculation theory of tomography and tomographic static correction. The usage of theoretical models and practical information on the method has been validated. The results show that using these methods to calculate static correction in a complex area,the quality of static correction is greatly improved.
文摘It is important and urgent to work out better statics correction methods to facilitate seismic prospecting. This paper presents a new method of statics correction calculation based on development of a seismic-gravity model of the near surface. Gravity interpretation includes determination of the local component caused by the near surface effects and calculation of the near-surface rock density by solving the linear inverse gravity problem. To obtain the near-surface velocities, priori seismic data such as time fields of the first waves recorded in the initial part of common depth point（CDP） seismograms are used. An optimal near-surface model is retrieved on the basis of the successive solution of the inverse and forward seismic problems, correlating with the observed seismic data. Matching of seismic and gravity model of the near surface yields the maximum coefficient of correlation between the values of velocities and densities. At the end of the interactive iterative process we get values of the near-surface seismic wave velocities, used for statics evaluation, and values of gravity anomalies, calculated with a variable density of the interbedded layer. The applications of the proposed method at geophysical exploration of oil and gas confirm the possibility of calculation of statics correction using the gravimetric data by constructing a coherent seismic-gravity model of the near surface.
文摘The method of error correction is one of key techniques of parallel robot. A new method of end error correction of 6-HTRT parallel robot is presented for engineering and researching on correlative theory of 6-HTRT parallel robot. The method need calculate many kinematics equations of parallel robot such as position back solution, velocity Jacobin, position forward solution and error Jacobin. New methods presented for solving these questions are simpler and fitter for programming and calculating, because former methods are too complex to use in engineering. These questions may be solved by iterative method of numerical value which has fast velocity of calculating. These new methods may be used in other mechanism of parallel robot too, and so have wider using value. The experimental results demonstrate that the system may satisfy entirely high technical request and fit for engineering in new measures.
文摘An abnormality tends to occur in the productivity indicative curves in the process of productivity test interpretation of multi-layer gas wells,resulting in the failure of solutions to their productivity equations and absolute open flow rates.To figure out the reasons for such an abnormality,we established a full-hole calculation model considering the coupling of wellbore variable mass flows and reservoir seepages to calculate a gas production profile and wellbore pressure distribution of a multi-layer productive gas reservoir.Then,based on the analysis of the gas production profile and wellbore pressure distribution characteristics of gas wells at different gas production rates,the root cause for the abnormality in the productivity indicative curves of multi-layer gas wells was analyzed,and a corresponding correction method was proposed and validated based on some examples.And the following research results were obtained.First,there are two reasons for the abnormal productivity indicative curves of multi-layer gas wells.On the one hand,there is a variable mass pipe flow in the wellbore of multi-layer sections and a flowing pressure gradient decreases with the increase of well depth.And the flowing pressure in the middle of the reservoir which is converted based on the flowing pressure gradient above the pressure gauge is higher than the real value.On the other hand,the pressure in the multi-layer producing sections doesn't realize a balance after well shutdown for a short time,so the measured static pressure is greater than the one measured when the pressure of each layer gets balanced after well shutdown for a long time.Second,the flowing pressure obtained from the productivity test interpretation of multi-layer gas producer shall be converted based on the pressure measured by the pressure gauge within 200 m above the reservoir top and it is necessary to adopt the static pressure measured after the balance of wellbore pressure.Third,the reliability of the model,the rationality of the abnormality reason analysis and the validity of the correction method are verified based on calculation examples and cases.It is concluded that the research results provide a technical support for the productivity evaluation of multi-layer gas wells.
基金funded by the Scientific Research Project of China Academy of Railway Sciences Group Co.,Ltd(No.2024YJ332 and No.2024QT005)Scientific Research Special Project of China State Railway Group Co.,Ltd(No.TICSTR-2024-Ⅳ-007).
文摘Purpose–This study solves the key problem that the static level monitoring is susceptible to temperature interference and affects the accuracy in slope instability/deformation monitoring.The purpose is to develop a reliable temperature compensation method for the system,improve the accuracy of slope stability monitoring and provide support for improving the safety and safety monitoring of engineering spoil slope and other projects.Design/methodology/approach–Combined with theoretical analysis and experimental verification,the temperature compensation method is explored.The working principle of the hydrostatic leveling monitoring system is analyzed and the data processing formula,the temperature error calculation formula and the calculation formula for eliminating the error settlement value are derived.The temperature compensation method is established and verified by the field test of the engineering spoil slope which is disturbed by a debris flow.Findings–The experimental results show that this method can reduce the error of the static level monitoring system by about 40%.The field test shows that the fluctuation of slope settlement monitoring value is reduced after temperature compensation and the monitoring value is consistent with the actual situation,which has certain practicability.Originality/value–The originality of this study is to derive a theoretical formula for quantifying/eliminating temperature errors in static leveling and to establish a practical temperature compensation method.The accuracy of the system is improved,which provides a reference for slope stability monitoring under complex environment(especially railway geotechnical engineering)and promotes the development of precision monitoring technology.
基金by National Natural Science Foundation of China(Nos.61872339,61502184 and 61925203).
文摘Regular expressions are widely used within and even outside of computer science due to their expressiveness and flexibility.However, regular expressions have a quite compact and rather tolerant syntax that makes them hard to understand, hard to compose,and error-prone. Faulty regular expressions may cause failures of the applications that use them. Therefore, ensuring the correctness of regular expressions is a vital prerequisite for their use in practical applications. The importance and necessity of ensuring correct definitions of regular expressions have attracted extensive attention from researchers and practitioners, especially in recent years. In this study, we provide a review of the recent works for ensuring the correct usage of regular expressions. We classify those works into different categories, including the empirical study, test string generation, automatic synthesis and learning, static checking and verification,visual representation and explanation, and repairing. For each category, we review the main results, compare different approaches, and discuss their advantages and disadvantages. We also discuss some potential future research directions.
