Carbon nanofibers(CNFs)with high specific surface area show great potential for sodium storage as a hard carbon material.Herein,CNFs anchored with Ni nanoparticles(CNFs/Ni)were prepared through chemical vapor depositi...Carbon nanofibers(CNFs)with high specific surface area show great potential for sodium storage as a hard carbon material.Herein,CNFs anchored with Ni nanoparticles(CNFs/Ni)were prepared through chemical vapor deposition and impregnation reduction methods,in situ growing on the three-dimensional porous copper current collector(3DP-Cu).The coupling effect of high-spin state Ni nanopar-ticles leads to the increase of defect density and the expansion of lattice spacing of CNFs.Meanwhile,the 3DP-Cu ensures a high loading capacity of CNFs and short ion/electron transport channels.As an integral binder-free anode,the 3DP-Cu/CNFs/Ni exhibits excellent electrochemical performance,which demon-strates a high specific capacity with 298.5 mAh g^(-1)at 1000 mA g^(-1)after 1500 cycles,and a high power density with 200 mAh g^(-1)over 1000 cycles at 5000 mA g^(-1).Density functional theory calculation re-sults show that the high-spin state Ni regulates the electronic structure of CNFs,which significantly reduces the adsorption energy for Na^(+)(-2.7 Ev)and thus enables high-rate capability.The regulation of the electronic structure of carbon materials by high-spin state metal provides a new strategy for developing high-power carbonaceous anode materials for sodium-ion batteries.展开更多
Activated carbon derived from biomass is an environmentally friendly and low-cost supercapacitor electrode material.The diverse morphology and pore shape of activated carbon have a significant impact on enhancing the ...Activated carbon derived from biomass is an environmentally friendly and low-cost supercapacitor electrode material.The diverse morphology and pore shape of activated carbon have a significant impact on enhancing the storage capacity of supercapacitors.However,the disparate distribution of pore sizes in activated carbon has a negative effect on energy density.In the present study,the synthesis and modification of the carbon pore structure of Manihot esculenta tuber and Bambusa blumeana stem was carried out using a sonochemical-assisted hydrothermal method with various chemicals(0.06 M KOH,0.06 M PVP,0.06 M ZnCl_(2)).The 3D pore structure of the sample modified with 0.06 M ZnCl_(2)exhibited a well-defined microporous architecture and a substantial specific surface area of 516.29 m^(2)g^(-1),leading to excellent electrochemical performance in coin cell supercapacitors.A high power density of 1086.12 Wkg^(-1)at a voltage window of 2 V has been attained,with a corresponding current density of 0.3 Ag^(-1).Remarkably,after 5000 charge and discharge cycles,the capacitance retention was maintained at 90.8%.The high power density produced from biomass activated carbon based on Manihot esculenta tuber and Bambusa blumeana stem modified using 0.06 M ZnCl_(2)provides a practical approach for environmentally friendly electrical energy storage devices and realizes rapid mass transportation.展开更多
The types of dopants lead to distinctive microstructural evolution behavior and physical properties in materials.In this study,the effect of stoichiometric and non-stoichiometric Mn modification,namely Pb(Mn_(1/3) Nb_...The types of dopants lead to distinctive microstructural evolution behavior and physical properties in materials.In this study,the effect of stoichiometric and non-stoichiometric Mn modification,namely Pb(Mn_(1/3) Nb_(2/3))O_(3)(PMnN)and MnO_(2),on the microstructure and properties of Pb(Yb_(1/2) Nb_(1/2))O_(3)-PbZrO_(3)-PbTiO_(3)(PYN-PZT)piezoelectric ceramics are systematically investigated.It was found that stoichiometric PMnN modification inhibits the grain growth while non-stoichiometric MnO_(2) modification promotes it,and thus the former yields stronger high-power characteristics(higher internal bias field Ei and larger mechanical quality factor Q_(m))than the latter.Specifically,with an equivalent amount of Mn modifica-tion(2 mol%),PMnN and MnO_(2) modification PYN-PZT ceramics exhibit significantly different values for average grain size(1.21μm vs.14.12μm),Ei(8.5 kV/cm vs.5 kV/cm),and Qm(2376 vs.1134).To further evaluate high-power performance,the vibration velocity v of these two modified PYN-PZT under high driving conditions was measured.Under an AC electric field of 3.5 V/mm,the PYN-PZT+6PMnN ceram-ics exhibit a v of up to 0.95 m s^(−1),larger than both MnO2-doped PYN-PZT(0.72 m s^(−1))and unmodified PYN-PZT ceramics(0.1 m s^(−1)),and far outperformance than both PZT-4 and PZT-8 ceramics.Furthermore,to elucidate the origin of the exceptional high-power performance of PMnN-modified PYN-PZT,we per-formed phase-field simulations revealing a pinning effect of the grain boundary on domain wall motion.Consequently,the small grain size(high grain boundary density)in PMnN-modified PYN-PZT exhibits a strong pinning effect,resulting in a large Q_(m) and outstanding high-power performance.展开更多
Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application o...Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application of PMN-PT in high-power settings is rapidly evolving,material parameters are typically tested under low signal conditions(1 V),and effects of different PT(PbTiO_(3))contents on the performance of PMN-PT single crystals under high-power conditions remain unclear.This study developed a comprehensive high-power testing platform using the constant voltage method to evaluate performance of PMN-PT single crystals with different PT contents under high-power voltage stimulation.Using crystals sized at 10 mm×3 mm×0.5 mm as an example,this research explored changes in material parameters.The results exhibit that while trend of the parameter changes under high-power excitation was consistent across different PT contents,degree of the change varied significantly.For instance,a PMN-PT single crystal with 26%(in mol)PT content exhibited a 25%increase in the piezoelectric coefficient d_(31),a 13%increase in the elastic compliance coefficient s_(11)^(E),a 17%increase in the electromechanical coupling coefficient k_(31),and a 73%decrease in the mechanical quality factor Q_(m) when the power reached 7.90 W.As the PT content increased,the PMN-PT materials became more susceptible to temperature influences,significantly reducing the power tolerance and more readily reaching the depolarization temperatures.This led to loss of piezoelectric performance.Based on these findings,a clearer understanding of impact of PT content on performance of PMN-PT single crystals under high-power applications has been established,providing reliable data to support design of sensors or transducers using PMN-PT as the sensitive element.展开更多
High-power laser technology is widely used in manufacturing processing,medical diagnosis,and treatment,and is one of the important fields of strategic high-tech competition in China at the moment.In the context of ind...High-power laser technology is widely used in manufacturing processing,medical diagnosis,and treatment,and is one of the important fields of strategic high-tech competition in China at the moment.In the context of industrial upgrading,high-power laser technology plays an important role in leading the development of the manufacturing industry and industrial intelligence.Based on this,this paper carries out research on high-power laser technology and industry,summarizes the basic principle and classification of high-power laser technology,analyzes the current status of high-power laser technology industry,points out the opportunities and challenges faced by the industry development,puts forward suggestions to promote the development of high-power laser technology industry,and to provide an effective reference for the application and development of high-power laser technology.展开更多
In order to analyze the deleterious effects of Passive InterModulation (PIM) on high power communication satellite systems, the basic concept of PIM is introduced, and an equation for the power spectral density of the...In order to analyze the deleterious effects of Passive InterModulation (PIM) on high power communication satellite systems, the basic concept of PIM is introduced, and an equation for the power spectral density of the n-th order PIM distortion insuch systems is derived by applying flat signal-power spectrum assumption and Fourier transform method. It is indicated that PIM level generally decreases with order and the lowest frequency receive channel in the receive band is the channel of most affected by PIM interference.展开更多
The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust pe...The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.展开更多
To maximize the power density of the electric propulsion motor in aerospace application,this paper proposes a novel Dynamic Neighborhood Genetic Learning Particle Swarm Optimization(DNGL-PSO)for the motor design,which...To maximize the power density of the electric propulsion motor in aerospace application,this paper proposes a novel Dynamic Neighborhood Genetic Learning Particle Swarm Optimization(DNGL-PSO)for the motor design,which can deal with the insufficient population diversity and non-global optimal solution issues.The DNGL-PSO framework is composed of the dynamic neighborhood module and the particle update module.To improve the population diversity,the dynamic neighborhood strategy is first proposed,which combines the local neighborhood exemplar generation mechanism and the shuffling mechanism.The local neighborhood exemplar generation mechanism enlarges the search range of the algorithm in the solution space,thus obtaining highquality exemplars.Meanwhile,when the global optimal solution cannot update its fitness value,the shuffling mechanism module is triggered to dynamically change the local neighborhood members.The roulette wheel selection operator is introduced into the shuffling mechanism to ensure that particles with larger fitness value are selected with a higher probability and remain in the local neighborhood.Then,the global learning based particle update approach is proposed,which can achieve a good balance between the expansion of the search range in the early stage and the acceleration of local convergence in the later stage.Finally,the optimization design of the electric propulsion motor is conducted to verify the effectiveness of the proposed DNGL-PSO.The simulation results show that the proposed DNGL-PSO has excellent adaptability,optimization efficiency and global optimization capability,while the optimized electric propulsion motor has a high power density of 5.207 kW/kg with the efficiency of 96.12%.展开更多
Titanium nitride films are of many excellent properties, such as high hardness,high wear resistance, high corrosion resistance and beautiful golden color.It has wide application in industry. However, several present t...Titanium nitride films are of many excellent properties, such as high hardness,high wear resistance, high corrosion resistance and beautiful golden color.It has wide application in industry. However, several present techniques, such as chemical vapor deposition, physical vapor deposition and ion beam, have their disadvantages which limit the range of using titanium nitride films. These shortcomings are high deposition temperature, weak adhesion of films to substrate and lower deposition rate.展开更多
This research focuses on solving the fault detection and health monitoring of high-power thyristor converter.In terms of the critical role of thyristor converter in nuclear fusion system,a method based on long short-t...This research focuses on solving the fault detection and health monitoring of high-power thyristor converter.In terms of the critical role of thyristor converter in nuclear fusion system,a method based on long short-term memory(LSTM)neural network model is proposed to monitor the operational state of the converter and accurately detect faults as they occur.By sampling and processing a large number of thyristor converter operation data,the LSTM model is trained to identify and detect abnormal state,and the power supply health status is monitored.Compared with traditional methods,LSTM model shows higher accuracy and abnormal state detection ability.The experimental results show that this method can effectively improve the reliability and safety of the thyristor converter,and provide a strong guarantee for the stable operation of the nuclear fusion reactor.展开更多
Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging tec...Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.展开更多
Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Ch...Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Characteristic parameters such as the area and number of spatters, the average grayscale of a spatter image, the entropy of a spatter grayscale image, the coordinate ratio of the plume centroid and the welding point, the polar coordinates of the plume centroid were defined and extracted. Karhunen-Loeve transform method was used to change the seven characteristics into three primary characteristics to reduce the dimensions. Also, K-nearest neighbor method was used to classify the plume and spatter images into two categories such as good and poor welding quality. The results show that plume and spatter have a close relationship with the welding stability, and two categories could be recognized effectively using K-nearest neighbor method based on Karhunen-Loeve transform.展开更多
Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain met...Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.展开更多
To improve the characteristics of a diamond-like carbon （DLC） film, Ti-containing amorphous hydrogenated carbon thin films were deposited on sus304 stainless steel substrates by high-power plasma-sputtering with tit...To improve the characteristics of a diamond-like carbon （DLC） film, Ti-containing amorphous hydrogenated carbon thin films were deposited on sus304 stainless steel substrates by high-power plasma-sputtering with titanium metal as the solid plasma source in a mixed ArC2H2 atmosphere. The films were fabricated to obtain a multilayered structure of Ti/TiC/DLC gradient for improving adhesion and reducing residual stress. The effects of substrate bias and target-substrate distance on the films＇ properties were studied by glow discharge spectroscope, X-ray diffractometer, Raman spectroscope, nanoindenter, and a pin-on-disk tribometer. The results indicate that the films possess superior adhesive strength and toughness.展开更多
A two-dimensional model of the silicon NPN monolithic composite transistor is established for the first time by utilizing the semiconductor device simulator, Sentaurus-TCAD. By analyzing the internal distributions of ...A two-dimensional model of the silicon NPN monolithic composite transistor is established for the first time by utilizing the semiconductor device simulator, Sentaurus-TCAD. By analyzing the internal distributions of electric field, current density, and temperature of the device, a detailed investigation on the damage process and mechanism induced by high-power microwaves （HPM） is performed. The results indicate that the temperature elevation occurs in the negative half-period and the temperature drop process is in the positive half-period under the HPM injection from the output port. The damage point is located near the edge of the base-emitter junction of T2, while with the input injection it exists between the base and the emitter of T2. Comparing these two kinds of injection, the input injection is more likely to damage the device than the output injection. The dependences of the damage energy threshold and the damage power threshold causing the device failure on the pulse-width are obtained, and the formulas obtained have the same form as the experimental equations, which demonstrates that more power is required to destroy the device if the pulse-width is shorter. Furthermore, the simulation result in this paper has a good coincidence with the experimental result.展开更多
Thermal management is one of the key technologies for high-power Light emitting diode(LED)entering into the general illuminating field.Successful thermal management depends on optimal packaging structure and selected ...Thermal management is one of the key technologies for high-power Light emitting diode(LED)entering into the general illuminating field.Successful thermal management depends on optimal packaging structure and selected packaging materials.In this paper,the aluminum is employed as a substrate of LED,3×3 array chips are placed on the substrate,heat dissipation performance is simulated using finite element analysis(FEA)software,analyzed are the influences on the temperature of the chip with different convection coefficient,and optical properties are simulated using optical analysis software.The results show that the packaging structure can not only effectually improve the thermal performance of high-power LED array but also increase the light extraction efficiency.展开更多
In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial meth...In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial method using single-particle level schemes obtained from the CDFT,and the level densities are then obtained by considering collective effects such as vibration and rotation.Our results are compared with those of other NLD models,including phenomenological,microstatisti-cal and nonrelativistic Hartree–Fock–Bogoliubov combinatorial models.This comparison suggests that the general trends among these models are essentially the same,except for some deviations among the different NLD models.In addition,the NLDs obtained using the CDFT combinatorial method with normalization are compared with experimental data,including the observed cumulative number of levels at low excitation energies and the measured NLDs.The CDFT combinatorial method yields results that are in reasonable agreement with the existing experimental data.展开更多
To reduce the energy demand and operation cost for circular electron positron collider(CEPC), the high efficiency klystrons are being developed at Institute of High Energy Physics, Chinese Academy of Sciences. A 800-k...To reduce the energy demand and operation cost for circular electron positron collider(CEPC), the high efficiency klystrons are being developed at Institute of High Energy Physics, Chinese Academy of Sciences. A 800-k W continuous wave(CW) klystron operating at frequency of 650-MHz has been designed. The results of beam–wave interaction simulation with several different codes are presented. The efficiency is optimized to be 65% with a second harmonic cavity in three-dimensional(3D) particle-in-cell code CST. The effect of cavity frequency error and mismatch load on efficiency of klystron have been investigated. The design and cold test of reentrant cavities are described, which meet the requirements of RF section design. So far, the manufacturing and high-power test of the first klystron prototype have been completed.When the gun operated at DC voltage of 80 k V and current of 15.4 A, the klystron peak power reached 804 k W with output efficiency of about 65.3% at 40% duty cycle. The 1-d B bandwidth is ±0.8 MHZ. Due to the crack of ceramic window, the CW power achieved about 700 kW. The high-power test results are in good agreement with 3D simulation.展开更多
Microwave pre-treatment is considered as a promising technique for alleviating cutter wear. This paper introduces a high-power microwave-induced fracturing system for hard rock. The test system consists of a high-powe...Microwave pre-treatment is considered as a promising technique for alleviating cutter wear. This paper introduces a high-power microwave-induced fracturing system for hard rock. The test system consists of a high-power microwave subsystem (100 kW), a true triaxial testing machine, a dynamic monitoring subsystem, and an electromagnetic shielding subsystem. It can realize rapid microwave-induced fracturing, intelligent tuning of impedance, dynamic feedback under strong microwave fields, and active control of microwave parameters by addressing the following issues: the instability and insecurity of the system, the discharge breakdown between coaxial lines during high-power microwave output, and a lack of feedback of rock-microwave response. In this study, microwave-induced surface and borehole fracturing tests under true triaxial stress were carried out. Experimental comparisons imply that high-power microwave irradiation can reduce the fracturing time of hard rock and that the fracture range (160 mm) of a 915-MHz microwave source is about three times that of 2.45 GHz. After microwave-induced borehole fracturing, many tensile cracks occur on the rock surface and in the borehole: the maximum reduction of the P-wave velocity is 12.8%. The test results show that a high-power microwave source of 915 MHz is more conducive to assisting mechanical rock breaking and destressing. The system can promote the development of microwave-assisted rock breaking equipment.展开更多
We present a new method that can be used to calculate pulse-front distortion by measuring the spectral interference of two point-diffraction fields in their overlapped district. We demonstrate, for the first time, the...We present a new method that can be used to calculate pulse-front distortion by measuring the spectral interference of two point-diffraction fields in their overlapped district. We demonstrate, for the first time, the measurement of the pulse-front distortion of the pulse from a complex multi-pass amplification system, which exists in almost all high-power laser systems, and obtain the irregular pulse-front distribution. The method presented does not need any reference light or assumption about the pulse-front distribution, and has an accuracy of several femtoseconds.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52271011,52102291).
文摘Carbon nanofibers(CNFs)with high specific surface area show great potential for sodium storage as a hard carbon material.Herein,CNFs anchored with Ni nanoparticles(CNFs/Ni)were prepared through chemical vapor deposition and impregnation reduction methods,in situ growing on the three-dimensional porous copper current collector(3DP-Cu).The coupling effect of high-spin state Ni nanopar-ticles leads to the increase of defect density and the expansion of lattice spacing of CNFs.Meanwhile,the 3DP-Cu ensures a high loading capacity of CNFs and short ion/electron transport channels.As an integral binder-free anode,the 3DP-Cu/CNFs/Ni exhibits excellent electrochemical performance,which demon-strates a high specific capacity with 298.5 mAh g^(-1)at 1000 mA g^(-1)after 1500 cycles,and a high power density with 200 mAh g^(-1)over 1000 cycles at 5000 mA g^(-1).Density functional theory calculation re-sults show that the high-spin state Ni regulates the electronic structure of CNFs,which significantly reduces the adsorption energy for Na^(+)(-2.7 Ev)and thus enables high-rate capability.The regulation of the electronic structure of carbon materials by high-spin state metal provides a new strategy for developing high-power carbonaceous anode materials for sodium-ion batteries.
基金funded by the national competitive grant of Riset Kolaborasi Indonesia 2023 from the Ministry of Higher Education,Research and Technology with a specific grant by Universitas Negeri Malang,Indonesia.
文摘Activated carbon derived from biomass is an environmentally friendly and low-cost supercapacitor electrode material.The diverse morphology and pore shape of activated carbon have a significant impact on enhancing the storage capacity of supercapacitors.However,the disparate distribution of pore sizes in activated carbon has a negative effect on energy density.In the present study,the synthesis and modification of the carbon pore structure of Manihot esculenta tuber and Bambusa blumeana stem was carried out using a sonochemical-assisted hydrothermal method with various chemicals(0.06 M KOH,0.06 M PVP,0.06 M ZnCl_(2)).The 3D pore structure of the sample modified with 0.06 M ZnCl_(2)exhibited a well-defined microporous architecture and a substantial specific surface area of 516.29 m^(2)g^(-1),leading to excellent electrochemical performance in coin cell supercapacitors.A high power density of 1086.12 Wkg^(-1)at a voltage window of 2 V has been attained,with a corresponding current density of 0.3 Ag^(-1).Remarkably,after 5000 charge and discharge cycles,the capacitance retention was maintained at 90.8%.The high power density produced from biomass activated carbon based on Manihot esculenta tuber and Bambusa blumeana stem modified using 0.06 M ZnCl_(2)provides a practical approach for environmentally friendly electrical energy storage devices and realizes rapid mass transportation.
基金supported by the National Key Research and Development Program of China(No.2023YFF0720700)the National Natural Science Foundation of China(Nos.52032010 and 52272120)the Central Government Funds of Guiding Local Scientific and Technological Development for Sichuan Province(No.2022ZYD0018).
文摘The types of dopants lead to distinctive microstructural evolution behavior and physical properties in materials.In this study,the effect of stoichiometric and non-stoichiometric Mn modification,namely Pb(Mn_(1/3) Nb_(2/3))O_(3)(PMnN)and MnO_(2),on the microstructure and properties of Pb(Yb_(1/2) Nb_(1/2))O_(3)-PbZrO_(3)-PbTiO_(3)(PYN-PZT)piezoelectric ceramics are systematically investigated.It was found that stoichiometric PMnN modification inhibits the grain growth while non-stoichiometric MnO_(2) modification promotes it,and thus the former yields stronger high-power characteristics(higher internal bias field Ei and larger mechanical quality factor Q_(m))than the latter.Specifically,with an equivalent amount of Mn modifica-tion(2 mol%),PMnN and MnO_(2) modification PYN-PZT ceramics exhibit significantly different values for average grain size(1.21μm vs.14.12μm),Ei(8.5 kV/cm vs.5 kV/cm),and Qm(2376 vs.1134).To further evaluate high-power performance,the vibration velocity v of these two modified PYN-PZT under high driving conditions was measured.Under an AC electric field of 3.5 V/mm,the PYN-PZT+6PMnN ceram-ics exhibit a v of up to 0.95 m s^(−1),larger than both MnO2-doped PYN-PZT(0.72 m s^(−1))and unmodified PYN-PZT ceramics(0.1 m s^(−1)),and far outperformance than both PZT-4 and PZT-8 ceramics.Furthermore,to elucidate the origin of the exceptional high-power performance of PMnN-modified PYN-PZT,we per-formed phase-field simulations revealing a pinning effect of the grain boundary on domain wall motion.Consequently,the small grain size(high grain boundary density)in PMnN-modified PYN-PZT exhibits a strong pinning effect,resulting in a large Q_(m) and outstanding high-power performance.
基金Research and Development Project on Voltage Sensors by China Southern Power Grid Digital Research Institute(210000KK52220017)。
文摘Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application of PMN-PT in high-power settings is rapidly evolving,material parameters are typically tested under low signal conditions(1 V),and effects of different PT(PbTiO_(3))contents on the performance of PMN-PT single crystals under high-power conditions remain unclear.This study developed a comprehensive high-power testing platform using the constant voltage method to evaluate performance of PMN-PT single crystals with different PT contents under high-power voltage stimulation.Using crystals sized at 10 mm×3 mm×0.5 mm as an example,this research explored changes in material parameters.The results exhibit that while trend of the parameter changes under high-power excitation was consistent across different PT contents,degree of the change varied significantly.For instance,a PMN-PT single crystal with 26%(in mol)PT content exhibited a 25%increase in the piezoelectric coefficient d_(31),a 13%increase in the elastic compliance coefficient s_(11)^(E),a 17%increase in the electromechanical coupling coefficient k_(31),and a 73%decrease in the mechanical quality factor Q_(m) when the power reached 7.90 W.As the PT content increased,the PMN-PT materials became more susceptible to temperature influences,significantly reducing the power tolerance and more readily reaching the depolarization temperatures.This led to loss of piezoelectric performance.Based on these findings,a clearer understanding of impact of PT content on performance of PMN-PT single crystals under high-power applications has been established,providing reliable data to support design of sensors or transducers using PMN-PT as the sensitive element.
文摘High-power laser technology is widely used in manufacturing processing,medical diagnosis,and treatment,and is one of the important fields of strategic high-tech competition in China at the moment.In the context of industrial upgrading,high-power laser technology plays an important role in leading the development of the manufacturing industry and industrial intelligence.Based on this,this paper carries out research on high-power laser technology and industry,summarizes the basic principle and classification of high-power laser technology,analyzes the current status of high-power laser technology industry,points out the opportunities and challenges faced by the industry development,puts forward suggestions to promote the development of high-power laser technology industry,and to provide an effective reference for the application and development of high-power laser technology.
文摘In order to analyze the deleterious effects of Passive InterModulation (PIM) on high power communication satellite systems, the basic concept of PIM is introduced, and an equation for the power spectral density of the n-th order PIM distortion insuch systems is derived by applying flat signal-power spectrum assumption and Fourier transform method. It is indicated that PIM level generally decreases with order and the lowest frequency receive channel in the receive band is the channel of most affected by PIM interference.
文摘The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.
基金supported by the National Natural Science Foundation of China(No.:52177028)Aeronautical Science Foundation of China(No.201907051002)+1 种基金the Fundamental Research Funds for the Central Universities,China(No.YWF21BJJ522)the Major Program of the National Natural Science Foundation of China(No.51890882).
文摘To maximize the power density of the electric propulsion motor in aerospace application,this paper proposes a novel Dynamic Neighborhood Genetic Learning Particle Swarm Optimization(DNGL-PSO)for the motor design,which can deal with the insufficient population diversity and non-global optimal solution issues.The DNGL-PSO framework is composed of the dynamic neighborhood module and the particle update module.To improve the population diversity,the dynamic neighborhood strategy is first proposed,which combines the local neighborhood exemplar generation mechanism and the shuffling mechanism.The local neighborhood exemplar generation mechanism enlarges the search range of the algorithm in the solution space,thus obtaining highquality exemplars.Meanwhile,when the global optimal solution cannot update its fitness value,the shuffling mechanism module is triggered to dynamically change the local neighborhood members.The roulette wheel selection operator is introduced into the shuffling mechanism to ensure that particles with larger fitness value are selected with a higher probability and remain in the local neighborhood.Then,the global learning based particle update approach is proposed,which can achieve a good balance between the expansion of the search range in the early stage and the acceleration of local convergence in the later stage.Finally,the optimization design of the electric propulsion motor is conducted to verify the effectiveness of the proposed DNGL-PSO.The simulation results show that the proposed DNGL-PSO has excellent adaptability,optimization efficiency and global optimization capability,while the optimized electric propulsion motor has a high power density of 5.207 kW/kg with the efficiency of 96.12%.
文摘Titanium nitride films are of many excellent properties, such as high hardness,high wear resistance, high corrosion resistance and beautiful golden color.It has wide application in industry. However, several present techniques, such as chemical vapor deposition, physical vapor deposition and ion beam, have their disadvantages which limit the range of using titanium nitride films. These shortcomings are high deposition temperature, weak adhesion of films to substrate and lower deposition rate.
基金supported by the Open Fund of Magnetic Confinement Fusion Laboratory of Anhui Province(No.2024AMF04003)the Natural Science Foundation of Anhui Province(No.228085ME142)Comprehensive Research Facility for Fusion Technology(No.20180000527301001228)。
文摘This research focuses on solving the fault detection and health monitoring of high-power thyristor converter.In terms of the critical role of thyristor converter in nuclear fusion system,a method based on long short-term memory(LSTM)neural network model is proposed to monitor the operational state of the converter and accurately detect faults as they occur.By sampling and processing a large number of thyristor converter operation data,the LSTM model is trained to identify and detect abnormal state,and the power supply health status is monitored.Compared with traditional methods,LSTM model shows higher accuracy and abnormal state detection ability.The experimental results show that this method can effectively improve the reliability and safety of the thyristor converter,and provide a strong guarantee for the stable operation of the nuclear fusion reactor.
基金supported by the National Natural Science Foundation of China(U23B20151 and 52171253).
文摘Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.
基金Project (51175095) supported by the National Natural Science Foundation of ChinaProjects (10251009001000001,9151009001000020) supported by the Natural Science Foundation of Guangdong Province,ChinaProject (20104420110001) supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘Classification of plume and spatter images was studied to evaluate the welding stability. A high-speed camera was used to capture the instantaneous images of plume and spatters during high power disk laser welding. Characteristic parameters such as the area and number of spatters, the average grayscale of a spatter image, the entropy of a spatter grayscale image, the coordinate ratio of the plume centroid and the welding point, the polar coordinates of the plume centroid were defined and extracted. Karhunen-Loeve transform method was used to change the seven characteristics into three primary characteristics to reduce the dimensions. Also, K-nearest neighbor method was used to classify the plume and spatter images into two categories such as good and poor welding quality. The results show that plume and spatter have a close relationship with the welding stability, and two categories could be recognized effectively using K-nearest neighbor method based on Karhunen-Loeve transform.
基金Project supported by the National Key Laboratory Foundation,China(Grant No.9140C530103110C5301)
文摘Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.
文摘To improve the characteristics of a diamond-like carbon （DLC） film, Ti-containing amorphous hydrogenated carbon thin films were deposited on sus304 stainless steel substrates by high-power plasma-sputtering with titanium metal as the solid plasma source in a mixed ArC2H2 atmosphere. The films were fabricated to obtain a multilayered structure of Ti/TiC/DLC gradient for improving adhesion and reducing residual stress. The effects of substrate bias and target-substrate distance on the films＇ properties were studied by glow discharge spectroscope, X-ray diffractometer, Raman spectroscope, nanoindenter, and a pin-on-disk tribometer. The results indicate that the films possess superior adhesive strength and toughness.
文摘A two-dimensional model of the silicon NPN monolithic composite transistor is established for the first time by utilizing the semiconductor device simulator, Sentaurus-TCAD. By analyzing the internal distributions of electric field, current density, and temperature of the device, a detailed investigation on the damage process and mechanism induced by high-power microwaves （HPM） is performed. The results indicate that the temperature elevation occurs in the negative half-period and the temperature drop process is in the positive half-period under the HPM injection from the output port. The damage point is located near the edge of the base-emitter junction of T2, while with the input injection it exists between the base and the emitter of T2. Comparing these two kinds of injection, the input injection is more likely to damage the device than the output injection. The dependences of the damage energy threshold and the damage power threshold causing the device failure on the pulse-width are obtained, and the formulas obtained have the same form as the experimental equations, which demonstrates that more power is required to destroy the device if the pulse-width is shorter. Furthermore, the simulation result in this paper has a good coincidence with the experimental result.
基金Key Scientific and Technological Research Projects of Henan Province(072102240027)Dr Foundation of Henan Polytechnic University(648602)Postgraduate Degree Thesis Innovation Foundation of Henan Polytechnic University(644005)
文摘Thermal management is one of the key technologies for high-power Light emitting diode(LED)entering into the general illuminating field.Successful thermal management depends on optimal packaging structure and selected packaging materials.In this paper,the aluminum is employed as a substrate of LED,3×3 array chips are placed on the substrate,heat dissipation performance is simulated using finite element analysis(FEA)software,analyzed are the influences on the temperature of the chip with different convection coefficient,and optical properties are simulated using optical analysis software.The results show that the packaging structure can not only effectually improve the thermal performance of high-power LED array but also increase the light extraction efficiency.
基金supported by the Natural Science Foundation of Jilin Province(No.20220101017JC)National Natural Science Foundation of China(No.11675063)Key Laboratory of Nuclear Data Foundation(JCKY2020201C157).
文摘In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial method using single-particle level schemes obtained from the CDFT,and the level densities are then obtained by considering collective effects such as vibration and rotation.Our results are compared with those of other NLD models,including phenomenological,microstatisti-cal and nonrelativistic Hartree–Fock–Bogoliubov combinatorial models.This comparison suggests that the general trends among these models are essentially the same,except for some deviations among the different NLD models.In addition,the NLDs obtained using the CDFT combinatorial method with normalization are compared with experimental data,including the observed cumulative number of levels at low excitation energies and the measured NLDs.The CDFT combinatorial method yields results that are in reasonable agreement with the existing experimental data.
基金Project supported by Yifang Wang’s Science Studio of the Ten Thousand Talents Project。
文摘To reduce the energy demand and operation cost for circular electron positron collider(CEPC), the high efficiency klystrons are being developed at Institute of High Energy Physics, Chinese Academy of Sciences. A 800-k W continuous wave(CW) klystron operating at frequency of 650-MHz has been designed. The results of beam–wave interaction simulation with several different codes are presented. The efficiency is optimized to be 65% with a second harmonic cavity in three-dimensional(3D) particle-in-cell code CST. The effect of cavity frequency error and mismatch load on efficiency of klystron have been investigated. The design and cold test of reentrant cavities are described, which meet the requirements of RF section design. So far, the manufacturing and high-power test of the first klystron prototype have been completed.When the gun operated at DC voltage of 80 k V and current of 15.4 A, the klystron peak power reached 804 k W with output efficiency of about 65.3% at 40% duty cycle. The 1-d B bandwidth is ±0.8 MHZ. Due to the crack of ceramic window, the CW power achieved about 700 kW. The high-power test results are in good agreement with 3D simulation.
基金support from the Na-tional Natural Science Foundation of China(Grant No.41827806)the liaoning Revitalization Talent Program of China(Grant No.XLYCYSZX1902).
文摘Microwave pre-treatment is considered as a promising technique for alleviating cutter wear. This paper introduces a high-power microwave-induced fracturing system for hard rock. The test system consists of a high-power microwave subsystem (100 kW), a true triaxial testing machine, a dynamic monitoring subsystem, and an electromagnetic shielding subsystem. It can realize rapid microwave-induced fracturing, intelligent tuning of impedance, dynamic feedback under strong microwave fields, and active control of microwave parameters by addressing the following issues: the instability and insecurity of the system, the discharge breakdown between coaxial lines during high-power microwave output, and a lack of feedback of rock-microwave response. In this study, microwave-induced surface and borehole fracturing tests under true triaxial stress were carried out. Experimental comparisons imply that high-power microwave irradiation can reduce the fracturing time of hard rock and that the fracture range (160 mm) of a 915-MHz microwave source is about three times that of 2.45 GHz. After microwave-induced borehole fracturing, many tensile cracks occur on the rock surface and in the borehole: the maximum reduction of the P-wave velocity is 12.8%. The test results show that a high-power microwave source of 915 MHz is more conducive to assisting mechanical rock breaking and destressing. The system can promote the development of microwave-assisted rock breaking equipment.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10904132 and 11074225)the National Defense Science Technology Foundation of State Key Laboratory of High Temperature and Density Plasma Physics,China (Grant No. 9140C680604110C6805)
文摘We present a new method that can be used to calculate pulse-front distortion by measuring the spectral interference of two point-diffraction fields in their overlapped district. We demonstrate, for the first time, the measurement of the pulse-front distortion of the pulse from a complex multi-pass amplification system, which exists in almost all high-power laser systems, and obtain the irregular pulse-front distribution. The method presented does not need any reference light or assumption about the pulse-front distribution, and has an accuracy of several femtoseconds.
