The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstru...The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.展开更多
Early-stage gastric cancer;Extent of lymph node dissection;D1 dissection;D2 dissection;Recurrence rate;Survival rateObjective:To investigate the impact of different lymph node dissection scopes on postoperative recurr...Early-stage gastric cancer;Extent of lymph node dissection;D1 dissection;D2 dissection;Recurrence rate;Survival rateObjective:To investigate the impact of different lymph node dissection scopes on postoperative recurrence and survival rates in patients with early gastric cancer,providing evidence-based support for optimizing clinical surgical plans.Methods:A retrospective analysis was conducted on the clinical data of 100 patients with early gastric cancer who underwent surgical treatment at our hospital from October 2021 to October 2023.Patients were divided into Group D1(n=50)and Group D2(n=50)based on the extent of lymph node dissection.Group D1 underwent limited lymph node dissection(dissection of the first station of lymph nodes around the stomach),while Group D2 underwent standard lymph node dissection(dissection of the first and second stations of lymph nodes around the stomach).Surgical-related indicators,the incidence of postoperative complications,the 2-year recurrence rate,and the 2-year survival rate were compared between the two groups of patients.Results:The operative time,intraoperative blood loss,postoperative hospital stay,and the number of lymph nodes dissected were significantly higher in the D2 group than in the D1 group(all P<0.001).The overall incidence of postoperative complications was higher in the D1 group than in the D2 group,but the difference was not statistically significant(χ^(2)=0.884,P=0.766).After a 2-year follow-up,the recurrence rate was significantly higher in the D1 group than in the D2 group(χ^(2)=4.000,P=0.046).The 2-year survival rate was significantly lower in the D1 group than in the D2 group(χ^(2)=5.005,P=0.025).A total of 100 patients with early-stage gastric cancer were grouped according to the depth of invasion,degree of differentiation,and lymph node metastasis status,and the recurrence rates of different subgroups were compared.The results showed that the recurrence rate was higher in patients with T1b stage than in those with T1a stage(χ^(2)=5.005,P=0.025),higher in poorly differentiated patients than in moderately and well-differentiated patients(χ^(2)=4.155,P=0.042),and higher in patients with lymph node metastasis than in those without lymph node metastasis(χ^(2)=4.512,P=0.034).Conclusion:Compared with D1 limited lymph node dissection,D2 standard lymph node dissection can significantly reduce the postoperative recurrence rate and improve the 2-year survival rate in patients with early-stage gastric cancer without significantly increasing the risk of postoperative complications.Although the surgical trauma is slightly greater,the overall prognosis is better,making it a preferred surgical treatment option for patients with early-stage gastric cancer.展开更多
Apparel exports China:The decline in exports widened from January to September(-2.4%,compared to-0.2%in January-June).Exports to the EU increased(+5.9%),though the growth rate moderated.Exports to the US saw a larger ...Apparel exports China:The decline in exports widened from January to September(-2.4%,compared to-0.2%in January-June).Exports to the EU increased(+5.9%),though the growth rate moderated.Exports to the US saw a larger contraction(January-June:-1.6%,January-September:-8.2%).While exports to ASEAN countries still fell by over 10%(-17.7%),shipments to the Philippines(+6.9%),Indonesia(+19.0%),and Cambodia(+64.9%)demonstrated stronger growth performance within the year.Regarding tariffs,on October 30,China and the US agreed to lower the rates on goods subject to additional duties(effectively reducing the average tariff rate on Chinese imports to the US from about 57%to approximately 47%,though this remains significantly higher than the 19.5%overall average rate applied to other countries).展开更多
The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC c...The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC carbides and eutectic(γ+γ′)formation,differential thermal analysis(DTA)was utilized to investigate the effect of cooing rate(10-90℃·min^(-1))on solidification behavior and micro-segregation of GH4975 alloy.According to the thermodynamic calculation and distribution characteristics of precipitates,the MC carbides can act as nucleation sites forγdendrites,but the nucleation ofγdendrites becomes less dependent on the MC carbide primers at higher cooling rates.As theγdendrites grow,the elements including Ti and Nb gradually accumulate in the residual liquid and leads to the formation of more MC carbides near the interdendritic region.Finally,the solidification is terminated with the formation of eutectic(γ+γ′).With an increase in cooling rate,the liquidus temperature rises,but the solidus temperature decreases,and thus the solidification range is obviously enlarged.The dendritic structure is significantly refined by the increase of cooling rate.The secondary dendrite arm spacing,λ_(2),as a function of cooling rate,T,can be expressed asλ_(2)=216.78T^(-0.42).Moreover,the increasing cooling rate weakens the back diffusion of Al,Ti,and Nb,increases the undercooling,and limits the growth of precipitates.Consequently,the sizes of MC carbides,eutectic(γ+γ′),and primaryγ′significantly decrease,but the area fraction of eutectic(γ+γ′)linerly increases as the cooling rate rises.Thus moderate cooling rate(such as 30℃·min^(-1))should be selected during the solidification process of GH4975 alloy.展开更多
When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may aff...When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may affect the initiation and propagation of fractures within brittle materials.Understanding the physical mechanisms leading to failure is crucial for underground engineering applications and geo-energy exploration and storage.We conducted triaxial compression experiments on porous Bentheim sandstone samples at different stress paths and pressure change rates.First,at a constant confining pressure of 35 MPa and pore pressure of 5 MPa,intact cylindrical samples were axially loaded up to about 85%of the peak strength.Subsequently,the axial piston position was fixed,and then either the pore pressure was increased or the confining pressure was decreased at two different rates(0.5 MPa/min or 2 MPa/min),leading to final catastrophic failure.The mechanical results revealed that samples subjected to higher rates of decreasing effective confining pressure exhibited larger stress drop rates,higher slip rates,higher total breakdown work,higher rates of acoustic emissions(AEs)before failure,and higher post-failure AE decay rates.In contrast,the applied stress path did not significantly affect rock failure characteristics.Comparison of located AE events with post-mortem microstructures of deformed samples shows a good agreement.The AE source type determined from the P-wave first-motion polarity shows that shear failure dominated the fracture process when approaching failure.Gutenberg-Richter b-values revealed a significant decrease before failure in all tests.Our results indicate that,in contrast to the stress path,the rate of effective stress change strongly affects fracturing behavior and AE rate changes.展开更多
One of the key challenges for underground rock reservoirs is ensuring prevention of the unwanted fluid leakage through rock fracture networks during their service life.Microbial-induced calcium carbonate precipitation...One of the key challenges for underground rock reservoirs is ensuring prevention of the unwanted fluid leakage through rock fracture networks during their service life.Microbial-induced calcium carbonate precipitation(MICP)technology has emerged as a promising bio-healing method for rock fractures with small apertures.In this study,a new“three-stage”injection strategy-based MICP(TS-MICP)bio-healing method was proposed,aiming to achieve a“three-high”performance that includes high bridging rate,high mechanical strength,and high homogeneity.A series of meter-scale rock fracture models were prepared to conduct TS-MICP grouting tests.Compared with the traditional injection strategy-based biohealing methods,the TS-MICP method significantly improved the bridging rate(32.1%e89.5%),mechanical properties(0.138e1.023 MPa),and homogeneity of CaCO_(3)precipitation(334.4%).Additionally,it achieved a higher material utilization rate(1.72 times higher),reducing the consumption of cementation solution(CS)by 258.8%,thereby demonstrating greater potential for field applications.The underlying mechanism for achieving high bridging rate and high homogeneity in CaCO_(3)precipitation can be attributed to the synergistic effects of the coupling injection strategy,which optimizes the advantages at each stage.In stage I,under the influence of gravity,the rapid flocculation and hydrogen bonding interactions of organic matter lead to formation of the dense and high-strength CaCO_(3)precipitation at the bottom using a low-concentration bacterial suspension(BS).This process establishes bridging steps along the wall sides for subsequent uniform CaCO_(3)precipitation.In stage II,concentrated BS is utilized to produce looser CaCO_(3)flocculation,which precipitates uniformly on the pre-existing bridging steps.In stage III,a two-step injection strategy was employed to reinforce the loose CaCO_(3)crystals formed in stages I and II,and finally forms a strong bridging effect with“three-high”performance.展开更多
As a critical department ensuring the sterility of hospital instruments,the Sterile Supply Center(SSC)directly impacts the sterility status of clinical instruments through its sterilization qualification rate.Geriatri...As a critical department ensuring the sterility of hospital instruments,the Sterile Supply Center(SSC)directly impacts the sterility status of clinical instruments through its sterilization qualification rate.Geriatric patients,due to physiological decline and compromised immune function,constitute a high-risk group for hospital-acquired infections,with more stringent requirements for instrument sterility.This paper analyzes the current status and influencing factors of sterilization qualification rates in SSCs,explores the mechanistic association between sterilization qualification rates and infections in geriatric departments,and proposes targeted strategies to improve sterilization qualification rates.It highlights the pivotal role of SSC instrument sterilization in infection prevention and control for geriatric patients,providing theoretical basis and practical guidance for optimizing SSC management,reducing infection rates in geriatric departments,and ensuring the safety of elderly patients’medical care.These findings aim to enhance overall infection management standards in hospitals.展开更多
On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sect...On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sectors like small and micro enterprises(SMEs),technological innovation,and green transition.For the textile industry,where small and medium-sized enterprises account for over 90%of traditional manufacturing,the policy benefits will inject strong momentum into the high-quality development from multiple dimensions,including reduced financing costs,support for transformation funds,and expansion of foreign trade markets.展开更多
It is well known that single-atom catalysts(SACs)have become a hot topic in the field of catalysis due to their advantages such as 100%metal atom utilization efficiency,high catalytic activity and selectivity compared...It is well known that single-atom catalysts(SACs)have become a hot topic in the field of catalysis due to their advantages such as 100%metal atom utilization efficiency,high catalytic activity and selectivity compared with conventional catalysts and nanocatalysts.However,the isolated metal atoms on SACs have thermodynamic instability and tend to agglomerate,which limit their catalytic performance.Therefore,it is of great significance to synthesize stable and high-loading single-atom catalysts(HLSACs).In this paper,we review the research progress of HLSACs from two aspects:design and application.Firstly,we comprehensively introduce the synthesis strategies of HLSACs,namely,top-down and bottom-up methods.Secondly,we overview the application status of HLSACs in three fields:electrocatalysis,thermal catalysis and photocatalysis.Finally,we summarize the development prospects and challenges of HLSACs.展开更多
Sulfur utilization improvement and control of dissolved lithium polysulfide(LiPS;Li_(2)S x,2<x≤8)are cru-cial aspects of the development of lithium-sulfur(Li-S)batteries,especially in high-loading sulfur elec-trode...Sulfur utilization improvement and control of dissolved lithium polysulfide(LiPS;Li_(2)S x,2<x≤8)are cru-cial aspects of the development of lithium-sulfur(Li-S)batteries,especially in high-loading sulfur elec-trodes and low electrolyte/sulfur(E/S)ratios.The sluggish reaction in the low E/S ratio induces poor LiPS solubility and unstable Li_(2)S electrodeposition,resulting in limited sulfur utilization,especially under high-loading sulfur electrode.In this study,we report on salt concentration effects that improve sulfur utilization with a high-loading cathode(6 mgs ulfurcm^(-2)),a high sulfur content(80 wt%)and a low E/S ratio(5 m L gs ulfur^(-1)).On the basis of the rapid LiPS dissolving in a low concentration electrolyte,we estab-lished that the quantity of Li_(2)S electrodeposition from a high Li+diffusion coefficient,referring to the reduction of LiPS precipitation,was significantly enhanced by a faster kinetic.These results demonstrate the importance of kinetic factors for the rate capability and cycle life stability of Li-S battery electrolytes through high Li_(2)S deposition under high-loading sulfur electrode.展开更多
Iron-based single-atom catalysts with nitrogen-doped carbon as support(Fe-SA/NPC)are considered effective alternatives to replace Pt-group metals for scalable application in fuel cells.However,synthesizing high-loadin...Iron-based single-atom catalysts with nitrogen-doped carbon as support(Fe-SA/NPC)are considered effective alternatives to replace Pt-group metals for scalable application in fuel cells.However,synthesizing high-loading Fe-SA catalysts by a simple procedure remains challenging.Herein,we report a high-loading(7.5 wt%)Fe-SA/NPC catalyst prepared by carbon-assisted pyrolysis of metal complexes.Both the nitrogen-doped porous carbon(NPC)support with high specific surface area and ο-phenylenediamine(o-PD)play key roles role in the preparation of high-loading Fe-SA/NPC catalysts.The results of X-ray photoelectron spectroscopy,high-angle annular dark-field scanning transmission electron microscopy,and X-ray absorption fine structure spectroscopy experiments show that the Fe atoms are anchored on the carbon carriers in a single-atom site configuration and coordinated with four of the doped nitrogen atoms of the carbon substrates(Fe-N_(4)).The activities of the Fe-SA/NPC catalysts in the oxygen reduction reaction increased with increasing iron loading.The optimized 250Fe-SA/NPC-800 catalyst exhibited an onset potential 0.97 V of and a half-wave potential of 0.85 V.Our study provides a simple approach for the large-scale synthesis of high-loading single-atom catalysts.展开更多
An effect of Mg introduction on efficiency of high-loaded nickel catalysts in dehydrogenation of decahydroquinoline(10HQ)was inves-tigated.10HQ dehydrogenation is key process for the liquid organic hydrogen carrier(LO...An effect of Mg introduction on efficiency of high-loaded nickel catalysts in dehydrogenation of decahydroquinoline(10HQ)was inves-tigated.10HQ dehydrogenation is key process for the liquid organic hydrogen carrier(LOHC)storage technology using the quinoline/10HQ pair as H_(2)-lean/H_(2)-rich substrates.An influence of synthesis technique of Ni/Mg/Al catalysts on their properties has been demonstrated.The catalysts were synthesized through coprecipitation of Ni,Mg,Al precursors to obtain layered double hydroxides(LDH)or via syn-thesis of(∼72 wt%)Ni-Al_(2)O_(3) system-also through coprecipitation,followed by modifying with a magnesium-containing precursor.For the catalysts of the first series,the inclusion of magnesium into LDH lattice led to a significant increase in catalytic activity in hydrogen extraction(10HQ dehydrogenation reaction).Despite the decrease in the content of catalytically active nickel,a significant increase in the yield of the dehydrogenation product was observed.This regularity is presumably associated with appearance of basic sites,that accelerates the dehydrogenation reaction.In the case of the second series,activity of pre-reduced(600°C,H_(2))catalysts in dehydrogenation of 10HQ also significantly depends on a MgO content and is maximal at Mg:Ni weight ratio 0.056.Using an in-depth study of structure of the original and reduced catalyst samples(Ni-Al_(2)O_(3) and Ni-MgNiOx-Al_(2)O_(3)),it was shown that this regularity is associated with the increased resistance of catalytically active Ni particles to agglomeration during the reductive activation.Also,using the Ni-MgNiOx-Al_(2)O_(3)catalyst for hydrogen storage process(hydrogenation reaction),the possibility of deep quinoline hydrogenation(up to 10HQ)in a flow-type reactor was demonstrated for the first time.展开更多
As the persistent concerns regarding sluggish reaction kinetics and insufficient conductivities of sulfur cathodes in all-solid-state Li-S batteries(ASSLSBs),numerous carbon additives and solid-state electrolytes(SSEs...As the persistent concerns regarding sluggish reaction kinetics and insufficient conductivities of sulfur cathodes in all-solid-state Li-S batteries(ASSLSBs),numerous carbon additives and solid-state electrolytes(SSEs)have been incorporated into the cathode to facilitate ion/electron pathways around sulfur.However,this has resulted in a reduced capacity and decomposition of SSEs.Therefore,it is worth exploring neotype sulfur hosts with electronic/ionic conductivity in the cathode.Herein,we present a hybrid cathode composed of few-layered S/MoS_(2)/C nanosheets(<5 layers)that exhibits high-loading and long-life performance without the need of additional carbon additives in advanced ASSLSBs.The multifunctional MoS_(2)/C host exposes the abundant surface for intimate contacting sites,in situ-formed LixMoS_(2)during discharging as mixed ion/electron conductive network improves the S/Li2S conversion,and contributes extra capacity for the part of active materials.With a high active material content(S+MoS_(2)/C)of 60 wt%in the S/MoS_(2)/C/Li_(6)PS_(5)Cl cathode composite(the carbon content is only~3.97 wt%),the S/MoS_(2)/C electrode delivers excellent electrochemical performance,with a high reversible discharge capacity of 980.3 mAh g^(-1)(588.2 mAh g^(-1)based on the whole cathode weight)after 100 cycles at 100 mA g^(-1).The stable cycling performance is observed over 3500 cycles with a Coulombic efficiency of 98.5%at 600 mA g^(-1),while a high areal capacity of 10.4 mAh cm^(-2)is achieved with active material loading of 12.8 mg cm^(-2).展开更多
This study investigates extreme rainfall episodes along the eastern foothills of the Taihang Mountains in North China from 30 July to 1 August 2023.It focuses on two types of extreme hourly rainfall rates(HRRs),i.e.,t...This study investigates extreme rainfall episodes along the eastern foothills of the Taihang Mountains in North China from 30 July to 1 August 2023.It focuses on two types of extreme hourly rainfall rates(HRRs),i.e.,the maximum regionalaverage HRR and site-observed HRR,which exhibited sequential development over southern,middle,and northern key regions.These rainfall extremes occurred in an environment where a high-pressure barrier over North China prevented the intrusion of cold air masses from the north while a northward-moving typhoon remnant vortex and its associated low-level jet(LLJ)transported warm and moist airflow from the south.Two distinct echo evolution modes and convection initiation mechanisms are identified for the two types of extreme HRRs.The maximum regional-average HRR occurred when the LLJ arrived to the east of the key regions,while the maximum site-observed HRR occurred when the warmer vortex center influenced the regions.Taking the northern key region as a representation,at the time of the maximum regional-average HRR,slantwise ascent of the airflow along a warm-frontal-like boundary released energy related to symmetrical instability,resulting in stratiform rainfall with weak convective cores.The transport of locally initiated convection over the eastern plain region,where the atmospheric stratification was more potentially unstable,also significantly contributed.When the maximum site-observed HRR occurred,the terrain lifting of warm and moist southeast airflow led to intense convection over the mountain foothills.Overall,the passage of the warm-core typhoon remnant vortex and interaction with Taihang Mountains determined the timing and location of extreme HRRs across the key regions.展开更多
BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization r...BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization rates increase in elderly patients due to a decline in glomerular filtration rate(GFR).AIM To investigate the connection between GFR and comorbidity and reasons for hospitalization in elderly patients.METHODS We analyzed patients aged 75 years and over who were admitted to the internal medicine clinic of a tertiary hospital in Eskisehir.At admission,we calculated GFR values using the Modification of Diet in Renal Disease study formula and classified them into six categories:G1,G2,G3a,G3b,G4,and G5.We analyzed associations with hospitalization diagnoses and comorbidity factors.RESULTS The average age of the patients was 80.8 years(±4.5 years).GFR was 57.287±29.5 mL/kg/1.73 m2 in women and 61.3±31.5 mL/kg/1.73 m2 in men(P=0.106).Most patients were admitted to the hospital at G2 stage(32.8%).The main reasons for hospitalization were anemia(34.4%and 28.6%)and malnutrition(20.9%and 20.8%)in women and men,respectively(P=0.078).The most frequent comor-bidity leading to hospitalization was arterial hypertension(n=168,28%),fo-llowed by diabetes(n=166,27.7%)(P=0.001).CONCLUSION When evaluating geriatric patients,low GFR alone does not provide sufficient information.Patients’comorbid factors should also be taken into account.There is no association between low GFR during hospitalization and hospitalization-Hamarat H.Aging and GFR related diagnoses.Knowing the GFR value before hospitalization will be more informative in such studies.展开更多
Ratoon rice(Oryza sativa L.)is a sustainable planting model,and its planting area has been increasing year by year.However,there is a lack of literature reviewing the measures and mechanisms to regulate the regenerati...Ratoon rice(Oryza sativa L.)is a sustainable planting model,and its planting area has been increasing year by year.However,there is a lack of literature reviewing the measures and mechanisms to regulate the regeneration rate,as well as the challenges in the production of ratoon rice.This study explores the effects of different varieties,climatic conditions(light and temperature),and cultivation measures(fertilizer management,cropping system,harvest method,water management,and plant growth regulators)on the regeneration rate and grain yield of the ratoon season.It summarizes and analyzes the possible mechanisms that affect the germination of regenerated buds from the perspectives of material accumulation and transportation,hormone metabolism,and molecular mechanisms,and identifies main factors currently limiting the development of ratoon rice.A significant positive correlation between the regeneration rate and grain yield of the ratoon season was found,regulated by varieties,temperatures,light resources,and cultivation measures.Improving the regeneration rate can effectively increase the production of ratoon rice.Notably,rice varieties with high regeneration ability exhibit characteristics such as a suitable growth period,a developed root system,high single-stem weight,a relatively small ratio of grain number to green leaf area,and strong lodging resistance in the main season.Additionally,the germination of regenerated buds is regulated by the accumulation and transport of endogenous hormones(indole-3-acetic acid,gibberellins,and cytokinins),photoassimilates(non-structural carbohydrates),and reactive oxygen metabolism.To further demonstrate the grain yield potential of the ratoon season,improvements are needed in three key areas:the cultivation system of low-stubble ratoon rice,the development of specialized harvesters,and the breeding of rice varieties with high-temperature tolerance during the main crop and low-temperature tolerance during the ratoon crop.展开更多
Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation proce...Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.展开更多
The content of soluble sugars is a vital parameter that indicates the quality of fleshy fruits such as apple(Malus domestica Borkh.).Studying the patterns of accumulation of soluble sugars and regulatory mechanisms as...The content of soluble sugars is a vital parameter that indicates the quality of fleshy fruits such as apple(Malus domestica Borkh.).Studying the patterns of accumulation of soluble sugars and regulatory mechanisms associated with fruit development is crucial for breeding improved fruit varieties.Here,we report that MdCIbHLH1,a low temperature-induced b HLH transcription factor,inhibits the accumulation of soluble sugars by regulating sugar-metabolizing enzyme activities,photosynthetic performance,and the expression of sugar-related genes in developing apple fruits.MdCIbHLH1 inhibits MdFBP and MdPEPCK expression,thus blocking the conversion of acids to sugars in apple fruits.We also discovered that MdCIbHLH1 decreases the photosynthetic rate and carbohydrate accumulation in apple leaves.Our results suggest that soluble sugar accumulation in apple fruits is influenced by multiple factors,including metabolic status,photosynthesis,and carbohydrate allocation.MdCIbHLH1 is critically involved in controlling the accumulation of soluble sugars by coordinating carbohydrate synthesis and allocation,thus influencing sugar transport and its metabolism during the development of apple fruits.展开更多
As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To...As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.展开更多
Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrai...Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrained(CU)and drained(CD)triaxial testing elucidated the impact of strain rate(0.005–0.3 mm/min)on strength envelopes,deformation moduli,pore pressures,and dilatancy characteristics of unsaturated and quasi-saturated loess.Under drained conditions with a controlled matric suction of 50 kPa,increasing strain rates from 0.005 mm/min to 0.011 mm/min induced decreases in failure deviatoric stress(qf),initial deformation modulus(Ei),and cohesion(c),while friction angles remained unaffected.Specimens displayed initial contractive volumetric strains transitioning to dilation across varying confining pressures.Higher rates diminished contractive volumetric strains and drainage volumes,indicating reduced densification and strength in the shear zone.Under undrained conditions,both unsaturated and quasi-saturated(pore pressure coefficient B=0.75)loess exhibited deteriorating mechanical properties with increasing rates from 0.03 mm/min to 0.3 mm/min.For unsaturated loess,reduced contractive volumetric strains at higher rates manifested relatively looser structures in the pre-peak stress phase.The strength decrement in quasi-saturated loess arose from elevated excess porewater pressures diminishing effective stresses.Negative porewater pressures emerged in quasi-saturated loess at lower confining pressures and strain rates.Compared to previous studies,the qf and Ei exhibited rate sensitivity below threshold values before attaining minima with marginal subsequent influence.The underlying mechanism mirrors the transition from creep to accelerated deformation phase of landslides.展开更多
基金National Key Research and Development Program of China(2024YFB4610803)。
文摘The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.
基金Shaanxi Provincial People’s Hospital Science and Technology Development Incubation Fund,“Research on the Role and Mechanism of PIGU in Regulating MUC-1 in Gastric Cancer Immune Escape”(Project No.:2023YJY-29)Shaanxi Provincial Natural Science Basic Research Program,“Research on the Mechanism and Clinical Significance of miR-140-5p Related to Gastric Cancer Recurrence and Metastasis”(Project No.:2023-JC-YB-639)。
文摘Early-stage gastric cancer;Extent of lymph node dissection;D1 dissection;D2 dissection;Recurrence rate;Survival rateObjective:To investigate the impact of different lymph node dissection scopes on postoperative recurrence and survival rates in patients with early gastric cancer,providing evidence-based support for optimizing clinical surgical plans.Methods:A retrospective analysis was conducted on the clinical data of 100 patients with early gastric cancer who underwent surgical treatment at our hospital from October 2021 to October 2023.Patients were divided into Group D1(n=50)and Group D2(n=50)based on the extent of lymph node dissection.Group D1 underwent limited lymph node dissection(dissection of the first station of lymph nodes around the stomach),while Group D2 underwent standard lymph node dissection(dissection of the first and second stations of lymph nodes around the stomach).Surgical-related indicators,the incidence of postoperative complications,the 2-year recurrence rate,and the 2-year survival rate were compared between the two groups of patients.Results:The operative time,intraoperative blood loss,postoperative hospital stay,and the number of lymph nodes dissected were significantly higher in the D2 group than in the D1 group(all P<0.001).The overall incidence of postoperative complications was higher in the D1 group than in the D2 group,but the difference was not statistically significant(χ^(2)=0.884,P=0.766).After a 2-year follow-up,the recurrence rate was significantly higher in the D1 group than in the D2 group(χ^(2)=4.000,P=0.046).The 2-year survival rate was significantly lower in the D1 group than in the D2 group(χ^(2)=5.005,P=0.025).A total of 100 patients with early-stage gastric cancer were grouped according to the depth of invasion,degree of differentiation,and lymph node metastasis status,and the recurrence rates of different subgroups were compared.The results showed that the recurrence rate was higher in patients with T1b stage than in those with T1a stage(χ^(2)=5.005,P=0.025),higher in poorly differentiated patients than in moderately and well-differentiated patients(χ^(2)=4.155,P=0.042),and higher in patients with lymph node metastasis than in those without lymph node metastasis(χ^(2)=4.512,P=0.034).Conclusion:Compared with D1 limited lymph node dissection,D2 standard lymph node dissection can significantly reduce the postoperative recurrence rate and improve the 2-year survival rate in patients with early-stage gastric cancer without significantly increasing the risk of postoperative complications.Although the surgical trauma is slightly greater,the overall prognosis is better,making it a preferred surgical treatment option for patients with early-stage gastric cancer.
文摘Apparel exports China:The decline in exports widened from January to September(-2.4%,compared to-0.2%in January-June).Exports to the EU increased(+5.9%),though the growth rate moderated.Exports to the US saw a larger contraction(January-June:-1.6%,January-September:-8.2%).While exports to ASEAN countries still fell by over 10%(-17.7%),shipments to the Philippines(+6.9%),Indonesia(+19.0%),and Cambodia(+64.9%)demonstrated stronger growth performance within the year.Regarding tariffs,on October 30,China and the US agreed to lower the rates on goods subject to additional duties(effectively reducing the average tariff rate on Chinese imports to the US from about 57%to approximately 47%,though this remains significantly higher than the 19.5%overall average rate applied to other countries).
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52474362,52174317 and 51904146)the General Project Funded by Liaoning Province Education Department(Grant No.JYTMS20230943)。
文摘The high-alloyed wrought superalloy GH4975 tends to form coarse MC carbides and eutectic(γ+γ′)phases,which adversely affect the cogging and homogenization process.To provide theoretical guidance for control of MC carbides and eutectic(γ+γ′)formation,differential thermal analysis(DTA)was utilized to investigate the effect of cooing rate(10-90℃·min^(-1))on solidification behavior and micro-segregation of GH4975 alloy.According to the thermodynamic calculation and distribution characteristics of precipitates,the MC carbides can act as nucleation sites forγdendrites,but the nucleation ofγdendrites becomes less dependent on the MC carbide primers at higher cooling rates.As theγdendrites grow,the elements including Ti and Nb gradually accumulate in the residual liquid and leads to the formation of more MC carbides near the interdendritic region.Finally,the solidification is terminated with the formation of eutectic(γ+γ′).With an increase in cooling rate,the liquidus temperature rises,but the solidus temperature decreases,and thus the solidification range is obviously enlarged.The dendritic structure is significantly refined by the increase of cooling rate.The secondary dendrite arm spacing,λ_(2),as a function of cooling rate,T,can be expressed asλ_(2)=216.78T^(-0.42).Moreover,the increasing cooling rate weakens the back diffusion of Al,Ti,and Nb,increases the undercooling,and limits the growth of precipitates.Consequently,the sizes of MC carbides,eutectic(γ+γ′),and primaryγ′significantly decrease,but the area fraction of eutectic(γ+γ′)linerly increases as the cooling rate rises.Thus moderate cooling rate(such as 30℃·min^(-1))should be selected during the solidification process of GH4975 alloy.
文摘When a porous rock is subjected to overall compressive loading,either increasing pore pressure or decreasing confining pressure could result in rock failure.The stress path and the applied pressure change rate may affect the initiation and propagation of fractures within brittle materials.Understanding the physical mechanisms leading to failure is crucial for underground engineering applications and geo-energy exploration and storage.We conducted triaxial compression experiments on porous Bentheim sandstone samples at different stress paths and pressure change rates.First,at a constant confining pressure of 35 MPa and pore pressure of 5 MPa,intact cylindrical samples were axially loaded up to about 85%of the peak strength.Subsequently,the axial piston position was fixed,and then either the pore pressure was increased or the confining pressure was decreased at two different rates(0.5 MPa/min or 2 MPa/min),leading to final catastrophic failure.The mechanical results revealed that samples subjected to higher rates of decreasing effective confining pressure exhibited larger stress drop rates,higher slip rates,higher total breakdown work,higher rates of acoustic emissions(AEs)before failure,and higher post-failure AE decay rates.In contrast,the applied stress path did not significantly affect rock failure characteristics.Comparison of located AE events with post-mortem microstructures of deformed samples shows a good agreement.The AE source type determined from the P-wave first-motion polarity shows that shear failure dominated the fracture process when approaching failure.Gutenberg-Richter b-values revealed a significant decrease before failure in all tests.Our results indicate that,in contrast to the stress path,the rate of effective stress change strongly affects fracturing behavior and AE rate changes.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFC3007102)the National Natural Science Foundation of China(Grant Nos.42477188 and 41925012).
文摘One of the key challenges for underground rock reservoirs is ensuring prevention of the unwanted fluid leakage through rock fracture networks during their service life.Microbial-induced calcium carbonate precipitation(MICP)technology has emerged as a promising bio-healing method for rock fractures with small apertures.In this study,a new“three-stage”injection strategy-based MICP(TS-MICP)bio-healing method was proposed,aiming to achieve a“three-high”performance that includes high bridging rate,high mechanical strength,and high homogeneity.A series of meter-scale rock fracture models were prepared to conduct TS-MICP grouting tests.Compared with the traditional injection strategy-based biohealing methods,the TS-MICP method significantly improved the bridging rate(32.1%e89.5%),mechanical properties(0.138e1.023 MPa),and homogeneity of CaCO_(3)precipitation(334.4%).Additionally,it achieved a higher material utilization rate(1.72 times higher),reducing the consumption of cementation solution(CS)by 258.8%,thereby demonstrating greater potential for field applications.The underlying mechanism for achieving high bridging rate and high homogeneity in CaCO_(3)precipitation can be attributed to the synergistic effects of the coupling injection strategy,which optimizes the advantages at each stage.In stage I,under the influence of gravity,the rapid flocculation and hydrogen bonding interactions of organic matter lead to formation of the dense and high-strength CaCO_(3)precipitation at the bottom using a low-concentration bacterial suspension(BS).This process establishes bridging steps along the wall sides for subsequent uniform CaCO_(3)precipitation.In stage II,concentrated BS is utilized to produce looser CaCO_(3)flocculation,which precipitates uniformly on the pre-existing bridging steps.In stage III,a two-step injection strategy was employed to reinforce the loose CaCO_(3)crystals formed in stages I and II,and finally forms a strong bridging effect with“three-high”performance.
文摘As a critical department ensuring the sterility of hospital instruments,the Sterile Supply Center(SSC)directly impacts the sterility status of clinical instruments through its sterilization qualification rate.Geriatric patients,due to physiological decline and compromised immune function,constitute a high-risk group for hospital-acquired infections,with more stringent requirements for instrument sterility.This paper analyzes the current status and influencing factors of sterilization qualification rates in SSCs,explores the mechanistic association between sterilization qualification rates and infections in geriatric departments,and proposes targeted strategies to improve sterilization qualification rates.It highlights the pivotal role of SSC instrument sterilization in infection prevention and control for geriatric patients,providing theoretical basis and practical guidance for optimizing SSC management,reducing infection rates in geriatric departments,and ensuring the safety of elderly patients’medical care.These findings aim to enhance overall infection management standards in hospitals.
文摘On January 19,2026,China's first structural interest rate cut of the year took effect.The People's Bank of China announced a 0.25 percentage point reduction in relending and rediscount rates,targeting key sectors like small and micro enterprises(SMEs),technological innovation,and green transition.For the textile industry,where small and medium-sized enterprises account for over 90%of traditional manufacturing,the policy benefits will inject strong momentum into the high-quality development from multiple dimensions,including reduced financing costs,support for transformation funds,and expansion of foreign trade markets.
基金financially supported by Beijing Natural Science Foundation(No.2212018)Beijing Institute of Technology Research Fund Program for Young Scholars(No.2022CX01011)+3 种基金Ningbo 3315 Innovative Teams Program(No.2019A-14-C)the National Natural Science Foundation of China(No.12374390)the Member of Youth Innovation Promotion Association Foundation of CAS,China(No.2023310)the Key Scientific and Technological Special Project of Ningbo City No.(2023Z209)。
文摘It is well known that single-atom catalysts(SACs)have become a hot topic in the field of catalysis due to their advantages such as 100%metal atom utilization efficiency,high catalytic activity and selectivity compared with conventional catalysts and nanocatalysts.However,the isolated metal atoms on SACs have thermodynamic instability and tend to agglomerate,which limit their catalytic performance.Therefore,it is of great significance to synthesize stable and high-loading single-atom catalysts(HLSACs).In this paper,we review the research progress of HLSACs from two aspects:design and application.Firstly,we comprehensively introduce the synthesis strategies of HLSACs,namely,top-down and bottom-up methods.Secondly,we overview the application status of HLSACs in three fields:electrocatalysis,thermal catalysis and photocatalysis.Finally,we summarize the development prospects and challenges of HLSACs.
基金supported by a grant from the Korea Evaluation Institute of Industrial Technology(KEIT)funded by the Ministry of Trade,Industry and Energy(MOTIE)(No.20012341)。
文摘Sulfur utilization improvement and control of dissolved lithium polysulfide(LiPS;Li_(2)S x,2<x≤8)are cru-cial aspects of the development of lithium-sulfur(Li-S)batteries,especially in high-loading sulfur elec-trodes and low electrolyte/sulfur(E/S)ratios.The sluggish reaction in the low E/S ratio induces poor LiPS solubility and unstable Li_(2)S electrodeposition,resulting in limited sulfur utilization,especially under high-loading sulfur electrode.In this study,we report on salt concentration effects that improve sulfur utilization with a high-loading cathode(6 mgs ulfurcm^(-2)),a high sulfur content(80 wt%)and a low E/S ratio(5 m L gs ulfur^(-1)).On the basis of the rapid LiPS dissolving in a low concentration electrolyte,we estab-lished that the quantity of Li_(2)S electrodeposition from a high Li+diffusion coefficient,referring to the reduction of LiPS precipitation,was significantly enhanced by a faster kinetic.These results demonstrate the importance of kinetic factors for the rate capability and cycle life stability of Li-S battery electrolytes through high Li_(2)S deposition under high-loading sulfur electrode.
文摘Iron-based single-atom catalysts with nitrogen-doped carbon as support(Fe-SA/NPC)are considered effective alternatives to replace Pt-group metals for scalable application in fuel cells.However,synthesizing high-loading Fe-SA catalysts by a simple procedure remains challenging.Herein,we report a high-loading(7.5 wt%)Fe-SA/NPC catalyst prepared by carbon-assisted pyrolysis of metal complexes.Both the nitrogen-doped porous carbon(NPC)support with high specific surface area and ο-phenylenediamine(o-PD)play key roles role in the preparation of high-loading Fe-SA/NPC catalysts.The results of X-ray photoelectron spectroscopy,high-angle annular dark-field scanning transmission electron microscopy,and X-ray absorption fine structure spectroscopy experiments show that the Fe atoms are anchored on the carbon carriers in a single-atom site configuration and coordinated with four of the doped nitrogen atoms of the carbon substrates(Fe-N_(4)).The activities of the Fe-SA/NPC catalysts in the oxygen reduction reaction increased with increasing iron loading.The optimized 250Fe-SA/NPC-800 catalyst exhibited an onset potential 0.97 V of and a half-wave potential of 0.85 V.Our study provides a simple approach for the large-scale synthesis of high-loading single-atom catalysts.
基金supported by the Ministry of Science and Higher Education of the Russian Federation within governmental order for Boreskov Institute of Catalysis SB RAS (projects FWUR-2024–0038, FWUR-2024–0032 and FWUR2024–0039)
文摘An effect of Mg introduction on efficiency of high-loaded nickel catalysts in dehydrogenation of decahydroquinoline(10HQ)was inves-tigated.10HQ dehydrogenation is key process for the liquid organic hydrogen carrier(LOHC)storage technology using the quinoline/10HQ pair as H_(2)-lean/H_(2)-rich substrates.An influence of synthesis technique of Ni/Mg/Al catalysts on their properties has been demonstrated.The catalysts were synthesized through coprecipitation of Ni,Mg,Al precursors to obtain layered double hydroxides(LDH)or via syn-thesis of(∼72 wt%)Ni-Al_(2)O_(3) system-also through coprecipitation,followed by modifying with a magnesium-containing precursor.For the catalysts of the first series,the inclusion of magnesium into LDH lattice led to a significant increase in catalytic activity in hydrogen extraction(10HQ dehydrogenation reaction).Despite the decrease in the content of catalytically active nickel,a significant increase in the yield of the dehydrogenation product was observed.This regularity is presumably associated with appearance of basic sites,that accelerates the dehydrogenation reaction.In the case of the second series,activity of pre-reduced(600°C,H_(2))catalysts in dehydrogenation of 10HQ also significantly depends on a MgO content and is maximal at Mg:Ni weight ratio 0.056.Using an in-depth study of structure of the original and reduced catalyst samples(Ni-Al_(2)O_(3) and Ni-MgNiOx-Al_(2)O_(3)),it was shown that this regularity is associated with the increased resistance of catalytically active Ni particles to agglomeration during the reductive activation.Also,using the Ni-MgNiOx-Al_(2)O_(3)catalyst for hydrogen storage process(hydrogenation reaction),the possibility of deep quinoline hydrogenation(up to 10HQ)in a flow-type reactor was demonstrated for the first time.
基金the financial support from the National Natural Science Foundation of China(T2241003)the National Key Research and Development Program of China(2022YFB4003500)the Key R&D project of Hubei Province,China(2021AAA006)
文摘As the persistent concerns regarding sluggish reaction kinetics and insufficient conductivities of sulfur cathodes in all-solid-state Li-S batteries(ASSLSBs),numerous carbon additives and solid-state electrolytes(SSEs)have been incorporated into the cathode to facilitate ion/electron pathways around sulfur.However,this has resulted in a reduced capacity and decomposition of SSEs.Therefore,it is worth exploring neotype sulfur hosts with electronic/ionic conductivity in the cathode.Herein,we present a hybrid cathode composed of few-layered S/MoS_(2)/C nanosheets(<5 layers)that exhibits high-loading and long-life performance without the need of additional carbon additives in advanced ASSLSBs.The multifunctional MoS_(2)/C host exposes the abundant surface for intimate contacting sites,in situ-formed LixMoS_(2)during discharging as mixed ion/electron conductive network improves the S/Li2S conversion,and contributes extra capacity for the part of active materials.With a high active material content(S+MoS_(2)/C)of 60 wt%in the S/MoS_(2)/C/Li_(6)PS_(5)Cl cathode composite(the carbon content is only~3.97 wt%),the S/MoS_(2)/C electrode delivers excellent electrochemical performance,with a high reversible discharge capacity of 980.3 mAh g^(-1)(588.2 mAh g^(-1)based on the whole cathode weight)after 100 cycles at 100 mA g^(-1).The stable cycling performance is observed over 3500 cycles with a Coulombic efficiency of 98.5%at 600 mA g^(-1),while a high areal capacity of 10.4 mAh cm^(-2)is achieved with active material loading of 12.8 mg cm^(-2).
基金supported by the National Key R&D Program of China(2022YFC3003903)Natural Science Foundation of Beijing(Grant No.8222079)and of China(Grant No.42475014,U2442204)the Basic Research Fund of CAMS(2023Z001).
文摘This study investigates extreme rainfall episodes along the eastern foothills of the Taihang Mountains in North China from 30 July to 1 August 2023.It focuses on two types of extreme hourly rainfall rates(HRRs),i.e.,the maximum regionalaverage HRR and site-observed HRR,which exhibited sequential development over southern,middle,and northern key regions.These rainfall extremes occurred in an environment where a high-pressure barrier over North China prevented the intrusion of cold air masses from the north while a northward-moving typhoon remnant vortex and its associated low-level jet(LLJ)transported warm and moist airflow from the south.Two distinct echo evolution modes and convection initiation mechanisms are identified for the two types of extreme HRRs.The maximum regional-average HRR occurred when the LLJ arrived to the east of the key regions,while the maximum site-observed HRR occurred when the warmer vortex center influenced the regions.Taking the northern key region as a representation,at the time of the maximum regional-average HRR,slantwise ascent of the airflow along a warm-frontal-like boundary released energy related to symmetrical instability,resulting in stratiform rainfall with weak convective cores.The transport of locally initiated convection over the eastern plain region,where the atmospheric stratification was more potentially unstable,also significantly contributed.When the maximum site-observed HRR occurred,the terrain lifting of warm and moist southeast airflow led to intense convection over the mountain foothills.Overall,the passage of the warm-core typhoon remnant vortex and interaction with Taihang Mountains determined the timing and location of extreme HRRs across the key regions.
文摘BACKGROUND With an increase in the elderly population,the frequency of hospitalizations in recent years has also risen at a rapid pace.This,in turn,has resulted in poor outcomes and costly treatments.Hospitalization rates increase in elderly patients due to a decline in glomerular filtration rate(GFR).AIM To investigate the connection between GFR and comorbidity and reasons for hospitalization in elderly patients.METHODS We analyzed patients aged 75 years and over who were admitted to the internal medicine clinic of a tertiary hospital in Eskisehir.At admission,we calculated GFR values using the Modification of Diet in Renal Disease study formula and classified them into six categories:G1,G2,G3a,G3b,G4,and G5.We analyzed associations with hospitalization diagnoses and comorbidity factors.RESULTS The average age of the patients was 80.8 years(±4.5 years).GFR was 57.287±29.5 mL/kg/1.73 m2 in women and 61.3±31.5 mL/kg/1.73 m2 in men(P=0.106).Most patients were admitted to the hospital at G2 stage(32.8%).The main reasons for hospitalization were anemia(34.4%and 28.6%)and malnutrition(20.9%and 20.8%)in women and men,respectively(P=0.078).The most frequent comor-bidity leading to hospitalization was arterial hypertension(n=168,28%),fo-llowed by diabetes(n=166,27.7%)(P=0.001).CONCLUSION When evaluating geriatric patients,low GFR alone does not provide sufficient information.Patients’comorbid factors should also be taken into account.There is no association between low GFR during hospitalization and hospitalization-Hamarat H.Aging and GFR related diagnoses.Knowing the GFR value before hospitalization will be more informative in such studies.
基金supported by the National Natural Science Foundation of China(Grant No.32301934)the Hunan Provincial Natural Science Foundation,China(Grant No.2023JJ40470)+1 种基金Ten Key Technological Projects in Hunan Province Project,China(Grant No.2025QK1006)Changsha Science and Technology Program Project,China(Grant No.kq2404003).
文摘Ratoon rice(Oryza sativa L.)is a sustainable planting model,and its planting area has been increasing year by year.However,there is a lack of literature reviewing the measures and mechanisms to regulate the regeneration rate,as well as the challenges in the production of ratoon rice.This study explores the effects of different varieties,climatic conditions(light and temperature),and cultivation measures(fertilizer management,cropping system,harvest method,water management,and plant growth regulators)on the regeneration rate and grain yield of the ratoon season.It summarizes and analyzes the possible mechanisms that affect the germination of regenerated buds from the perspectives of material accumulation and transportation,hormone metabolism,and molecular mechanisms,and identifies main factors currently limiting the development of ratoon rice.A significant positive correlation between the regeneration rate and grain yield of the ratoon season was found,regulated by varieties,temperatures,light resources,and cultivation measures.Improving the regeneration rate can effectively increase the production of ratoon rice.Notably,rice varieties with high regeneration ability exhibit characteristics such as a suitable growth period,a developed root system,high single-stem weight,a relatively small ratio of grain number to green leaf area,and strong lodging resistance in the main season.Additionally,the germination of regenerated buds is regulated by the accumulation and transport of endogenous hormones(indole-3-acetic acid,gibberellins,and cytokinins),photoassimilates(non-structural carbohydrates),and reactive oxygen metabolism.To further demonstrate the grain yield potential of the ratoon season,improvements are needed in three key areas:the cultivation system of low-stubble ratoon rice,the development of specialized harvesters,and the breeding of rice varieties with high-temperature tolerance during the main crop and low-temperature tolerance during the ratoon crop.
基金supported by the Nation Key Research and Development Program of China(No.2021YFB3701100).
文摘Hot deformation with high strain rate has been paid more attention due to its high efficiency and low cost,however,the strain rate dependent dynamic recrystallization(DRX)and texture evolution in hot deformation process,which affect the formability of metals,are lack of study.In this work,the DRX behavior and texture evolution of Mg-8Gd-1Er-0.5Zr alloy hot compressed with strain rates of 0.1 s^(−1),1 s^(−1),10 s^(−1) and 50 s^(−1) are studied,and the corresponding dominant mechanisms for DRX and texture weakening are discussed.Results indicated the DRX fraction was 20%and the whole texture intensity was 16.89 MRD when the strain rate was 0.1 s^(−1),but they were 76%and 6.55 MRD,respectively,when the strain rate increased to 50 s^(−1).The increment of DRX fraction is suggested to result from the reduced DRX critical strain and the increased dislocation density as well as velocity,while the weakened whole texture is attributed to the increased DRX grains.At the low strain rate of 0.1 s^(−1),discontinuous DRX(DDRX)was the dominant,but the whole texture was controlled by the deformed grains with the preferred orientation of{0001}⊥CD,because the number of DDRX grains was limited.At the high strain rate of 50 s^(−1),continuous DRX(CDRX)and twin-induced DRX(TDRX)were promoted,and more DRX grains resulted in orientation randomization.The whole texture was mainly weakened by CDRX and TDRX grains,in which CDRX plays a major role.The results of present work are significant for understanding the hot workability of Mg-RE alloys with a high strain rate.
基金supported by grants from the National Natural Science Foundation of China(Grant Nos.32122080,31972375)Shandong Province(Grant No.ZR2020YQ25)。
文摘The content of soluble sugars is a vital parameter that indicates the quality of fleshy fruits such as apple(Malus domestica Borkh.).Studying the patterns of accumulation of soluble sugars and regulatory mechanisms associated with fruit development is crucial for breeding improved fruit varieties.Here,we report that MdCIbHLH1,a low temperature-induced b HLH transcription factor,inhibits the accumulation of soluble sugars by regulating sugar-metabolizing enzyme activities,photosynthetic performance,and the expression of sugar-related genes in developing apple fruits.MdCIbHLH1 inhibits MdFBP and MdPEPCK expression,thus blocking the conversion of acids to sugars in apple fruits.We also discovered that MdCIbHLH1 decreases the photosynthetic rate and carbohydrate accumulation in apple leaves.Our results suggest that soluble sugar accumulation in apple fruits is influenced by multiple factors,including metabolic status,photosynthesis,and carbohydrate allocation.MdCIbHLH1 is critically involved in controlling the accumulation of soluble sugars by coordinating carbohydrate synthesis and allocation,thus influencing sugar transport and its metabolism during the development of apple fruits.
基金supported by the National Natural Science Foundation of China(Nos.52222110,52401354,and 52301353).
文摘As the main geomaterials for coral reefs oil or gas extraction and underground infrastructure construction,coral reef limestone demonstrates significantly distinct mechanical responses compared to terrigenous rocks.To investigate the mechanical behaviour of coral reef limestone under the coupling impact of size and strain rate,the uniaxial compression tests were conducted on reef limestone samples with length-to-diameter(L/D)ratio ranging from 0.5 to 2.0 at strain rate ranging from 10^(−5)·s^(−1)to 10^(−2)·s^(−1).It is revealed that the uniaxial compressive strength(UCS)and residual compressive strength(RCS)of coral reef limestone exhibits a decreasing trend with L/D ratio increasing.The dynamic increase factor(DIF)of UCS is linearly correlated with the logarithm of strain rate,while increasing the L/D ratio further enhances the DIF.The elastic modulus increases with strain rate or L/D ratio increasing,whereas the Poisson’s ratio approximates to a constant value of 0.24.The failure strain increases with strain rate increasing or L/D ratio decreasing,while the increase in L/D ratio will inhibit the enhancing effect of the strain rate.The high porosity and low mineral strength are the primary factors contributing to a high RCS of 16.7%–64.9%of UCS,a lower brittleness index and multiple irregular fracture planes.The failure pattern of coral reef limestone transits from the shear-dominated to the splitting-dominated failure with strain rate increasing or L/D ratio decreasing,which is mainly governed by the constrained zones induced by end friction and the strain rate-dependent crack propagation.Moreover,a predictive formula incorporating coupling effect of size and strain rate for the UCS of reef limestone was established and verified to effectively capture the trend of UCS.
文摘Although time-dependent deformation of geomaterials underpins slope-failure prediction models,the influence of strain rate on shearing strength and deformation behavior of loess remains unclear.The consolidated undrained(CU)and drained(CD)triaxial testing elucidated the impact of strain rate(0.005–0.3 mm/min)on strength envelopes,deformation moduli,pore pressures,and dilatancy characteristics of unsaturated and quasi-saturated loess.Under drained conditions with a controlled matric suction of 50 kPa,increasing strain rates from 0.005 mm/min to 0.011 mm/min induced decreases in failure deviatoric stress(qf),initial deformation modulus(Ei),and cohesion(c),while friction angles remained unaffected.Specimens displayed initial contractive volumetric strains transitioning to dilation across varying confining pressures.Higher rates diminished contractive volumetric strains and drainage volumes,indicating reduced densification and strength in the shear zone.Under undrained conditions,both unsaturated and quasi-saturated(pore pressure coefficient B=0.75)loess exhibited deteriorating mechanical properties with increasing rates from 0.03 mm/min to 0.3 mm/min.For unsaturated loess,reduced contractive volumetric strains at higher rates manifested relatively looser structures in the pre-peak stress phase.The strength decrement in quasi-saturated loess arose from elevated excess porewater pressures diminishing effective stresses.Negative porewater pressures emerged in quasi-saturated loess at lower confining pressures and strain rates.Compared to previous studies,the qf and Ei exhibited rate sensitivity below threshold values before attaining minima with marginal subsequent influence.The underlying mechanism mirrors the transition from creep to accelerated deformation phase of landslides.
