The increase in CO_(2)injectivity and shifting of CO_(2)-absorbing layers in multilayered geological CO_(2)sequestration(GCS)reservoirs in Ordos,China indicate significantpermeability variations in certain layers.To c...The increase in CO_(2)injectivity and shifting of CO_(2)-absorbing layers in multilayered geological CO_(2)sequestration(GCS)reservoirs in Ordos,China indicate significantpermeability variations in certain layers.To capture these system changes,a numerical model incorporating all 21 aquifers and internal aquitards was developed.The monitored pressure was well matched through multiphase and thermalhydraulic-mechanical(THM)coupling numerical simulations by introducing permeability variations.The results revealed that the permeability in the second layer increased on approximately day 13 due to the abrupt pressure buildup and temperature decrease.Even such a low rate of CO_(2)(2.8 kg/s)injected into the low permeability system initiated some fractures and the permeability in the second layer around the wellbore increased by 722 times.The second critical system change occurred on approximately day 386.As demonstrated in the numerical simulation,the substantial injection of cold CO_(2)induced strong thermal stress,leading to rock contraction and the initiation of several cracks.The permeability of the firstlayer around the wellbore unexpectedly increased by 4 orders of magnitude.Since no additional pressure could drive the CO_(2)into the remaining 17 layers,the total storage capability of the multilayered system was reduced.A whole picture of the system variation is fully presented and the underlying mechanisms are analyzed.It is believed that the phenomenon of thermal-hydraulic fracturing observed in this fieldand the simulation procedures will benefitother fluidinjection and production works in various geotechnical settings.展开更多
Fractures are typically characterized by roughness that significantlyaffects the mechanical and hydraulic characteristics of reservoirs.However,hydraulic fracturing mechanisms under the influenceof fracture morphology...Fractures are typically characterized by roughness that significantlyaffects the mechanical and hydraulic characteristics of reservoirs.However,hydraulic fracturing mechanisms under the influenceof fracture morphology remain largely unexplored.Leveraging the advantages of the finite-discrete element method(FDEM)for explicitly simulating fracture propagation and the strengths of the unifiedpipe model(UPM)for efficientlymodeling dual-permeability seepage,we propose a new hydromechanical(HM)coupling approach for modeling hydraulic fracturing.Validated against benchmark examples,the proposed FDEM-UPM model is further augmented by incorporating a Fourier-based methodology for reconstructing non-planar fractures,enabling quantitative analysis of hydraulic fracturing behavior within rough discrete fracture networks(DFNs).The FDEM-UPM model demonstrates computational advantages in accurately capturing transient hydraulic seepage phenomena,while the asynchronous time-stepping schemes between hydraulic and mechanical analyses substantially enhanced computational efficiencywithout compromising computational accuracy.Our results show that fracture morphology can affect both macroscopic fracture networks and microscopic interaction types between hydraulic fractures(HFs)and natural fractures(NFs).In an isotropic stress field,the initiation azimuth,propagation direction and microcracking mechanism are significantly influencedby fracture roughness.In an anisotropic stress field,HFs invariably propagate parallel to the direction of the maximum principal stress,reducing the overall complexity of the stimulated fracture networks.Additionally,stress concentration and perturbation attributed to fracture morphology tend to be compromised as the leak-off increases,while the breakdown and propagation pressures remain insensitive to fracture morphology.These findingsprovide new insights into the hydraulic fracturing mechanisms of fractured reservoirs containing complex rough DFNs.展开更多
To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals ...To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.展开更多
In the development of coalbed methane(CBM)reservoirs using multistage fractured horizontal wells,there often exist areas that are either repeatedly stimulated or completely unstimulated between fracturing stages,leadi...In the development of coalbed methane(CBM)reservoirs using multistage fractured horizontal wells,there often exist areas that are either repeatedly stimulated or completely unstimulated between fracturing stages,leading to suboptimal reservoir performance.Currently,there is no well-established method for accurately evaluating the effectiveness of such stimulation.This study introduces,for the first time,the concept of the Fracture Network Bridging Coefficient(FNBC)as a novel metric to assess stimulation performance.By quantitatively coupling the proportions of unstimulated and overstimulated volumes,the FNBC effectively characterizes the connectivity and efficiency of the fracture network.A background grid calibration method is developed to quantify the stage-controlled volume,effectively stimulated volume,unstimulated volume,and repeatedly stimulated volume among different stages of horizontal wells.Furthermore,an optimization model is constructed by taking the FNBC as the objective function and the fracturing injection rate and fluid volume as optimization variables.The Simultaneous Perturbation Stochastic Approximation(SPSA)algorithm is employed to iteratively perturb and optimize these variables,progressively improving the FNBC until the optimal displacement rate and fluid volume corresponding to the maximum FNBC are obtained.Field application in a typical CBM multistage fractured horizontal well in China demonstrates that the FNBC increased from 0.358 to 0.539(a 50.6% improvement),with the injection rate rising from 16 m^(3)/min to 24 m^(3)/min and the average fluid volume per stage increasing from 2490 m^(3) to 3192 m^(3),significantly enhancing the stimulation effectiveness.This research provides theoretical support for designing high-efficiency stimulation strategies in unconventional reservoirs under dynamic limits.展开更多
In order to solve the difficulties in the volume fracturing stimulation of Middle Jurassic Shaximiao Formation tight sandstone reservoirs in the Qiulin Block of Central Sichuan Basin and explore the adaptability of hi...In order to solve the difficulties in the volume fracturing stimulation of Middle Jurassic Shaximiao Formation tight sandstone reservoirs in the Qiulin Block of Central Sichuan Basin and explore the adaptability of high-intensity volumefracturing technology,we selected the outcrop samples of Shaximiao Formation tight sandstone in the Qiulin Block to carry out the physical simulation experiment of true triaxial hydraulic fracturing.On this basis,horizontal well cluster perforation was optimally designed by using the production predictionmodel of staged multi-cluster fracturing horizontal wells.Then,based on the liquid control and proppant increase mode,three rounds of pilot tests were carried out on the tight sandstone reservoirs in this area.Andthe following research resultswere obtained.First,natural fractures in the ShaximiaoFormation tight sandstone reservoir of theQiulin Block are undeveloped,and hydraulic fractures are morphologically dominated by symmetric double-wing fractures,so complex fracture networks can be hardly formed.In addition,the reservoir is of medium to strong water sensitivity,so conventional volume fracturing is not adaptive to the reservoir stimulation in this block.Second,the connotation of high-intensity volume fracturing technology is to carry out multi-cluster perforation in each section to form multiple independent double-wing fractures and to implement the proppant injection mode of liquid control and proppant increase to reduce the inflowfluid while ensuring the high-intensity proppant injection,so as to reduce the damage of inflowfluid to the formation.Third,there are 10 fracturing sections inWell Qiulin 207-5-H2,with 7-12 clusters in each section,and the displacement is in the range of 16-18m^(3)/min.According to the fluid control and proppant increase mode,12146 m^(3) slick water and 4170 t proppant are injected in total.The tested production rate and absolute open flow of natural gas after the fracturing are up to 83.88×10^(4)m^(3)/d and 214.05×10^(4)m^(3)/d,respectively.Fourth,with the decrease of cluster spacing,the cumulative gas production increases gradually,but when the cluster spacing is less than 15 m,the increase amplitude of cumulative gas production decreases.Fifth,when the proppant injection intensity is lower than 6 t/m,the tested gas production per kilometer of stimulated section ina horizontal well overall presents an increasing trend with the increase of proppant injection intensity.When the proppant injection intensity is higher than 6 t/m,however,the tested gas production per kilometer of stimulated section does not increase significantly with the increase of proppant injection intensity.Sixth,as the included angle between the borehole trajectory and the direction ofmaximumhorizontal principal stress increases,the tested gas production per kilometer of stimulated section overall presents an increasing trend.When the hydraulic fracture is nearly perpendicular to the borehole,the effective drainage area is the largest and the tested gas production per kilometer of stimulated section is also the highest.In conclusion,the fracturing mode of high production well has a borehole trajectory of large included angle,perforation cluster spacing of 10 m or so,proppant injection intensity of 5 t/m and large-displacement slick water+continuous injection of combined particle size proppant.展开更多
So far,large-scale development of shale gas wells above 3500 m in the Changning Block of the Sichuan Basin has been realized by means of the large-scale hydraulic fracturing technology.As the main process parameters a...So far,large-scale development of shale gas wells above 3500 m in the Changning Block of the Sichuan Basin has been realized by means of the large-scale hydraulic fracturing technology.As the main process parameters arefinally set,however,the improvement rate of its stimulation effect tends to slow down,while in North America,single-well production has increased significantly by shortening cluster spacing and increasing proppant volumes.In order to provide a reliable practice basis for optimizing the parameters of shale gas fracturing process,this paper analyzes the productivity increasing mechanism of the new fracturing technology of intensive stageþhigh-intensity proppant injection by virtue of the model for calculating induced stress and multi-stage and multi-cluster productivity of horizontal wells.And accordingly,the main en-gineering factors of fracturing stimulation technology were ascertained.Then,after the pilot test scheme on this new fracturing technology was formulated according to the geological parameters of this block,the pilot test was carried out.Finally,the fracturing process parameters were optimized based on actual production effects and experimental results.And the following research results were obtained.First,shortening the spacing between main fractures,increasing the interference degree of induced stress and improving the stimulation degree of hydraulic fractures to shale reservoirs are the technical keys to the intense stage,and increasing the proppant volume,reducing the influence degree of proppant embedding and breaking on the attenuation of fracture conductivity and ensuring the long-term conductivity of propped fractures are the internal causes of significant production increase through high-intensity proppant injection.Second,the optimized implementation parameters of this new process in the Changning Block are as follows.The cluster spacing is in the range of 15e20 m,the proppant injection intensity is 2.0e2.5 t/m,and the liquid consuming intensity is 30e35 m3/m.It is concluded that this new process increases the single-well production of shale gas wells and the development benefit of the Changning Block and provides technical support for improving the comprehensive development benefit of shale gas wells in this block.展开更多
The height of fractured zone(HFZ) at the high-intensity longwall mining panel plays a vital role in the safety analysis of coal mining under bodies of water. This paper described definitions of the highintensity minin...The height of fractured zone(HFZ) at the high-intensity longwall mining panel plays a vital role in the safety analysis of coal mining under bodies of water. This paper described definitions of the highintensity mining. The processes of overburden failure transfer(OFT) were analyzed, which were divided into the development stage and the termination stage. Through theoretical analysis, the limited suspension-distance and the limited overhanging distance were proposed to judge the damage of each stratum. Mechanical models of strata suspended integrity and overhanging stability were established.A theoretical method to predict the HFZ at the high-intensity longwall mining panel was put forward based on the processes of OFT. Taking a high-intensity longwall mining panel(No. 11915 panel) as an example, the theoretical method proposed, the engineering analogy and the empirical formulas in the Regulation were used to predict the HFZ. The results show that the theoretical result is consistent with the engineering analogies' result and empirical formulas' result. The rationality and reliability of the theoretical method proposed is verified.展开更多
Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks be...Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.展开更多
To elucidate the dynamic characteristics of in-situ methane deflagration in coalbed methane wellbores and its mechanisms for fracturing coal rock,this study first developed a simulation experimental system specificall...To elucidate the dynamic characteristics of in-situ methane deflagration in coalbed methane wellbores and its mechanisms for fracturing coal rock,this study first developed a simulation experimental system specifically designed for methane in-situ deflagration fracturing.This experimental system,which is capable of withstanding pressures up to 150 MPa and meanwhile applying axial and confining pressures of up to 50 MPa to rock cores,enables the coupled simulation on methane deflagration and rock core fracturing processes.With the aid of this experimental system,physical simulation experiments on in-situ methane deflagration fracturing were conducted,and the following findings were obtained.Methane deflagration loads in enclosed wellbores exhibit characteristics of multi-level pulsed oscillation.With the rise of initial gas pressure,the peak deflagration load increases approximately linearly,with the pressure amplification factor spanning from 23.14 to 31.10,and its peak loading rate grows exponentially.Accordingly,the fracture volume and fracture porosity augment.To be specific,when the initial gas pressure rises from 0.6 to 2.4 MPa,the fracture volume and fracture porosity augment by factors of 14.0 and 8.73,respectively.The fractal dimension of spatial distribution of fractures also increases with the rise of deflagration load,indicating that a higher deflagration load conduces to the development of a larger and more complex fracture network.Methane deflagration fracturing is characterized as a composite fracture mode that involves the impact of strong stress waves and the driving force of high-pressure fluids.The primary factors influencing damage to coal-rock include the high-stress impact in the initial stage of deflagration,the fluid pressure driving effect in the middle stage,and the thermal shock resulting from high temperatures in the later stage.展开更多
Through a case analysis,this study examines the spatiotemporal evolution of microseismic(MS)events,energy characteristics,volumetric features,and fracture network development in surface well hydraulic fracturing.A tot...Through a case analysis,this study examines the spatiotemporal evolution of microseismic(MS)events,energy characteristics,volumetric features,and fracture network development in surface well hydraulic fracturing.A total of 349 MS events were analyzed across different fracturing sections,revealing significant heterogeneity in fracture propagation.Energy scanning results showed that cumulative energy values ranged from 240 to 1060 J across the sections,indicating notable differences.Stimulated reservoir volume(SRV)analysis demonstrated well-developed fracture networks in certain sections,with a total SRV exceeding 1540000 m^(3).The hydraulic fracture network analysis revealed that during the midfracturing stage,the density and spatial extent of MS events significantly increased,indicating rapid fracture propagation and the formation of complex networks.In the later stage,the number of secondary fractures near fracture edges decreased,and the fracture network stabilized.By comparing the branching index,fracture length,width,height,and SRV values across different fracturing sections,Sections No.1 and No.8 showed the best performance,with high MS event densities,extensive fracture networks,and significant energy release.However,Sections No.4 and No.5 exhibited sparse MS activity and poor fracture connectivity,indicating suboptimal stimulation effectiveness.展开更多
With the increasing demand for energy,traditional oil resources are facing depletion and insufficient supply.Many countries are rapidly turning to the development of unconventional oil and gas resources.Among them,sha...With the increasing demand for energy,traditional oil resources are facing depletion and insufficient supply.Many countries are rapidly turning to the development of unconventional oil and gas resources.Among them,shale oil and gas reservoirs have become the focus of unconventional oil and gas resources exploration and development.Based on the characteristics of shale oil and gas reservoirs,supercritical CO_(2) fracturing is more conducive to improving oil recovery than other fracturing technologies.In this paper,the mechanism of fracture initiation and propagation of supercritical CO_(2) in shale is analyzed,including viscosity effect,surface tension effect,permeation diffusion effect of supercritical CO_(2),and dissolution-adsorption effect between CO_(2) and shale.The effects of natural factors,such as shale properties,bedding plane and natural fractures,and controllable factors,proppant,temperature,pressure,CO_(2) concentration and injection rate on fracture initiation and propagation are clarified.The methods of supercritical CO_(2) fracturing process,thickener and proppant optimization to improve the efficiency of supercritical CO_(2) fracturing are discussed.In addition,some new technologies of supercritical CO_(2) fracturing are introduced.The challenges and prospects in the current research are also summarized.For example,supercritical CO_(2) is prone to filtration when passing through porous media,and it is difficult to form a stable flow state.Therefore,in order to achieve stable fracturing fluid suspension and effectively support fractu res,it is urge nt to explo re new fracturing fluid additives or improve fracturing fluid formulations combined with the research of new proppants.This paper is of great significance for understanding the behavior mechanism of supercritical CO_(2) in shale and optimizing fracturing technology.展开更多
Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hyd...Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.展开更多
Supercritical CO_(2)(SC-CO_(2))fracturing stands out a promising waterless stimulation technique in the development of unconventional resources.While numerous studies have delved into the inducedfracture mechanism of ...Supercritical CO_(2)(SC-CO_(2))fracturing stands out a promising waterless stimulation technique in the development of unconventional resources.While numerous studies have delved into the inducedfracture mechanism of SC-CO_(2),the small scale of rock samples and synthetic materials used in many studies have limited a comprehensive understanding of fracture propagation in unconventional formations.In this study,cubic tight sandstone samples with dimensions of 300 mm were employed to conduct SC-CO_(2)fractu ring experiments under true-triaxial stre ss conditions.The spatial morphology and quantitative attributes of fracture induced by water and SC-CO_(2)fracturing were compared,while the impact of in-situ stress on fracture propagation was also investigated.The results indicate that the SCCO_(2)fracturing takes approximately ten times longer than water fracturing.Furthermore,under identical stress condition,the breakdown pressure(BP)for SC-CO_(2)fracturing is nearly 25%lower than that for water fracturing.A quantitative analysis of fracture morphology reveals that water fracturing typically produces relatively simple fracture pattern,with the primary fracture distribution predominantly controlled by bedding planes.In contrast,SC-CO_(2)fracturing results in a more complex fracture morphology.As the differential of horizontal principal stress increases,the BP for SC-CO_(2)fractured rock exhibits a downward trend,and the induced fracture morphology becomes more simplified.Moreover,the presence of abnormal in-situ stress leads to a further increase in the BP for SC-CO_(2)fracturing,simultaneously enhancing the development of a more conductive fracture network.These findings provide critical insights into the efficiency and behavior of SC-CO_(2)fracturing in comparison to traditional water-based fracturing,offering valuable implication for its potential applications in unconventional reservoirs.展开更多
Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposit...Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposition shield the vertical propagation of hydraulic fractures and limit the longitudinal reconstruction in reservoirs,posing a great challenge for large-scale volumetric fracturing.Radial wellbore crosslayer fracturing,which transforms the interaction between the hydraulic fractures and lithologic interface into longitudinal multilayer competitive initiation,could provide a potential solution for this engineering challenge.To determine the longitudinal propagation behaviors of fractures guided by radial wellbores,true triaxial fracturing experiments were performed on multilayer shale-sandstone samples,with a focus on the injection pressure response,fracture morphology,and cross-layer pattern.The effects of the radial borehole length L,vertical stress difference K_(v),injection rate Q,and viscosity m of the fracturing fluid were analyzed.The results indicate that radial wellbores can greatly facilitate fracture initiation and cross-layer propagation.Unlike conventional hydraulic fracturing,there are two distinct fracture propagation patterns in radial wellbore fracturing:cross-layering and skip-layering.The fracture height guided by a radial wellbore is positively correlated with K_(v),Q,and m.Increasing these parameters causes a shift in the fracture initiation from a single root to an asynchronous root/toe end and can improve the cross-layer propagation capacity.Critical parameter thresholds exist for fracture propagation through and across interlayers under the guidance of radial boreholes.A parameter combination of critical cross-layering/skip-layering or alternating displacement/viscosity is recommended to simultaneously improve the fracture height and degree of lateral activation.The degree of correlation of different parameters with the vertical fracture height can be written as L>Q/m>K_(v).Increasing the radial wellbore length can effectively facilitate fracture cross-/skip-layer propagation and reduce the critical threshold of injection parameters,which is conducive to maximizing the stimulated reservoir volume.展开更多
To more accurately describe the coal damage and fracture evolution law during liquid nitrogen(LN_(2))fracturing under true triaxial stress,a thermal-hydraulic-mechanical-damage(THMD)coupling model for LN_(2) fracturin...To more accurately describe the coal damage and fracture evolution law during liquid nitrogen(LN_(2))fracturing under true triaxial stress,a thermal-hydraulic-mechanical-damage(THMD)coupling model for LN_(2) fracturing coal was developed,considering the coal heterogeneity and thermophysical parameters of nitrogen.The accuracy and applicability of model were verified by comparing with LN_(2) injection pre-cooling and fracturing experimental data.The effects of different pre-cooling times and horizontal stress ratios on coal damage evolution,permeability,temperature distribution,and fracture characteristics were analyzed.The results show that the permeability and damage of the coal increase exponentially,while the temperature decreases exponentially during the fracturing process.As the pre-cooling time increases,the damage range of the coal expands,and the fracture propagation becomes more pronounced.The initiation pressure and rupture pressure decrease and tend to stabilize with longer precooling times.As the horizontal stress ratio increases,fractures preferentially extend along the direction of maximum horizontal principal stress,leading to a significant decrease in both initiation and rupture pressures.At a horizontal stress ratio of 3,the initiation pressure drops by 48.07%,and the rupture pressure decreases by 41.36%.The results provide a theoretical basis for optimizing LN_(2) fracturing techniques and improving coal seam modification.展开更多
Two sets of alloys,Mg-Zn-Ca-xNi(0≤x≤5),have been developed with tunable corrosion and mechanical properties,optimized for fracturing materials.High-zinc artificial aged(T6)Mg-12Zn-0.5Ca-x Ni(0≤x≤5)series,featuring...Two sets of alloys,Mg-Zn-Ca-xNi(0≤x≤5),have been developed with tunable corrosion and mechanical properties,optimized for fracturing materials.High-zinc artificial aged(T6)Mg-12Zn-0.5Ca-x Ni(0≤x≤5)series,featuring a straightforward preparation method and the potential for manufacturing large-scale components,exhibit notable corrosion rates up to 29 mg cm^(-2)h^(-1)at 25℃ and 643 mg cm^(-2)h^(-1)at 93℃.The high corrosion rate is primary due to the Ni–containing second phases,which intensify the galvanic corrosion that overwhelms their corrosion barrier effect.Low-zinc rolled Mg-1.5Zn-0.2Ca-x Ni(0≤x≤5)series,characterizing excellent deformability with an elongation to failure of~26%,present accelerated corrosion rates up to 34 mg cm^(-2)h^(-1)at 25℃ and 942 mg cm^(-2)h^(-1)at 93℃.The elimination of corrosion barrier effect via deformation contributes to the further increase of corrosion rate compared to the T6 series.Additionally,Mg-Zn-Ca-xNi(0≤x≤5)alloys exhibit tunable ultimate tensile strengths ranging from~190 to~237 MPa,depending on their specific composition.The adjustable corrosion rate and mechanical properties render the Mg-Zn-Ca-x Ni(0≤x≤5)alloys suitable for fracturing materials.展开更多
The Carter model is used to characterize the dynamic behaviors of fracture growth and fracturing fluid leakoff.A thermo-fluid coupling temperature response forward model is built considering the fluid flow and heat tr...The Carter model is used to characterize the dynamic behaviors of fracture growth and fracturing fluid leakoff.A thermo-fluid coupling temperature response forward model is built considering the fluid flow and heat transfer in wellbore,fracture and reservoir.The influences of fracturing parameters and fracture parameters on the responses of distributed temperature sensing(DTS)are analyzed,and a diagnosis method of fracture parameters is presented based on the simulated annealing algorithm.A field case study is introduced to verify the model’s reliability.Typical V-shaped characteristics can be observed from the DTS responses in the multi-cluster fracturing process,with locations corresponding to the hydraulic fractures.The V-shape depth is shallower for a higher injection rate and longer fracturing and shut-in time.Also,the V-shape is wider for a higher fracture-surface leakoff coefficient,longer fracturing time and smaller fracture width.Additionally,the cooling effect near the wellbore continues to spread into the reservoir during the shut-in period,causing the DTS temperature to decrease instead of rise.Real-time monitoring and interpretation of DTS temperature data can help understand the fracture propagation during fracturing operation,so that immediate measures can be taken to improve the fracturing performance.展开更多
Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-ba...Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.展开更多
The development of shale reservoirs is important in ensuring China’s national energy security by achiev-ing energy independence.Among the key technologies for shale oil production,CO_(2) fracturing is an effec-tive m...The development of shale reservoirs is important in ensuring China’s national energy security by achiev-ing energy independence.Among the key technologies for shale oil production,CO_(2) fracturing is an effec-tive method that can not only enhance oil recovery but also promote large amounts of CO_(2) storage,thereby supporting China’s goals of achieving a carbon peak and carbon neutrality.This research paper aims to study the impacts and prospective applications of CO_(2) fracturing in shale reservoirs,using real exploitation parameters from the Gulong shale reservoir well 1(GYYP1)well in the Songliao Basin.By utilizing numerical simulation,the dynamics of CO_(2) production are analyzed.Adsorption and diffusion are identified as pivotal mechanisms for CO_(2) storage in shale reservoirs.After the analysis of the fractur-ing process,approximately 22.13%of CO_(2) is found to be adsorbed,which decreases to 11.06%after ten years due to pressure decline.Diffusion increases the volume of CO_(2) interacting with a greater extent of shale,thereby enhancing the adsorption mechanism.Over time,the diffusion process results in a remarkable increase of 26.02%in CO_(2) adsorption,ensuring the long-term and stable storage of CO_(2) within the shale reservoir.This investigation delves into the contribution of these two crucial mechanisms of CO_(2) storage in shale reservoirs,ultimately predicting that,by 2030,approximately two million tons of CO_(2) can be effectively stored in the Daqing Oilfield through CO_(2) fracturing in shale oil reservoirs.Such an achievement will undoubtedly contribute to the sustainable development of the energy sector and foster the transformation and upgrading of China’s energy structure.展开更多
A coupled thermal-hydro-mechanical cohesive phase-field model for hydraulic fracturing in deep coal seams is presented.Heat exchange between the cold fluid and the hot rock is considered,and the thermal contribution t...A coupled thermal-hydro-mechanical cohesive phase-field model for hydraulic fracturing in deep coal seams is presented.Heat exchange between the cold fluid and the hot rock is considered,and the thermal contribution terms between the cold fluid and the hot rock are derived.Heat transfer obeys Fourier's law,and porosity is used to relate the thermodynamic parameters of the fracture and matrix domains.The net pressure difference between the fracture and the matrix is neglected,and thus the fluid flow is modeled by the unified fluid-governing equations.The evolution equations of porosity and Biot's coefficient during hydraulic fracturing are derived from their definitions.The effect of coal cleats is considered and modeled by Voronoi polygons,and this approach is shown to have high accuracy.The accuracy of the proposed model is verified by two sets of fracturing experiments in multilayer coal seams.Subsequently,the differences in fracture morphology,fluid pressure response,and fluid pressure distribution between direct fracturing of coal seams and indirect fracturing of shale interlayers are explored,and the effects of the cluster number and cluster spacing on fracture morphology for multi-cluster fracturing are also examined.The numerical results show that the proposed model is expected to be a powerful tool for the fracturing design and optimization of deep coalbed methane.展开更多
基金supports from the National Natural Science Foundation of China(Grant Nos.52179095,52378323,and 42407216)are gratefully acknowledged.
文摘The increase in CO_(2)injectivity and shifting of CO_(2)-absorbing layers in multilayered geological CO_(2)sequestration(GCS)reservoirs in Ordos,China indicate significantpermeability variations in certain layers.To capture these system changes,a numerical model incorporating all 21 aquifers and internal aquitards was developed.The monitored pressure was well matched through multiphase and thermalhydraulic-mechanical(THM)coupling numerical simulations by introducing permeability variations.The results revealed that the permeability in the second layer increased on approximately day 13 due to the abrupt pressure buildup and temperature decrease.Even such a low rate of CO_(2)(2.8 kg/s)injected into the low permeability system initiated some fractures and the permeability in the second layer around the wellbore increased by 722 times.The second critical system change occurred on approximately day 386.As demonstrated in the numerical simulation,the substantial injection of cold CO_(2)induced strong thermal stress,leading to rock contraction and the initiation of several cracks.The permeability of the firstlayer around the wellbore unexpectedly increased by 4 orders of magnitude.Since no additional pressure could drive the CO_(2)into the remaining 17 layers,the total storage capability of the multilayered system was reduced.A whole picture of the system variation is fully presented and the underlying mechanisms are analyzed.It is believed that the phenomenon of thermal-hydraulic fracturing observed in this fieldand the simulation procedures will benefitother fluidinjection and production works in various geotechnical settings.
基金supported by the National Natural Science Foundation of China(Grant Nos.52574103 and 42277150).
文摘Fractures are typically characterized by roughness that significantlyaffects the mechanical and hydraulic characteristics of reservoirs.However,hydraulic fracturing mechanisms under the influenceof fracture morphology remain largely unexplored.Leveraging the advantages of the finite-discrete element method(FDEM)for explicitly simulating fracture propagation and the strengths of the unifiedpipe model(UPM)for efficientlymodeling dual-permeability seepage,we propose a new hydromechanical(HM)coupling approach for modeling hydraulic fracturing.Validated against benchmark examples,the proposed FDEM-UPM model is further augmented by incorporating a Fourier-based methodology for reconstructing non-planar fractures,enabling quantitative analysis of hydraulic fracturing behavior within rough discrete fracture networks(DFNs).The FDEM-UPM model demonstrates computational advantages in accurately capturing transient hydraulic seepage phenomena,while the asynchronous time-stepping schemes between hydraulic and mechanical analyses substantially enhanced computational efficiencywithout compromising computational accuracy.Our results show that fracture morphology can affect both macroscopic fracture networks and microscopic interaction types between hydraulic fractures(HFs)and natural fractures(NFs).In an isotropic stress field,the initiation azimuth,propagation direction and microcracking mechanism are significantly influencedby fracture roughness.In an anisotropic stress field,HFs invariably propagate parallel to the direction of the maximum principal stress,reducing the overall complexity of the stimulated fracture networks.Additionally,stress concentration and perturbation attributed to fracture morphology tend to be compromised as the leak-off increases,while the breakdown and propagation pressures remain insensitive to fracture morphology.These findingsprovide new insights into the hydraulic fracturing mechanisms of fractured reservoirs containing complex rough DFNs.
基金supported by the Research Fund of the National Natural Science Foundation of China(No.52374205)the Fundamental Research Project of the Educational Department of Liaoning Province(No.JYTMS20230793)the Research Fund of the State Key Laboratory of Coal Resources and Safe Mining,CUMT(No.YJY-XD-2024-A-016).
文摘To address the key scientific challenge of monitoring the dynamic fracturing of surrounding rock in deep roadways,this study systematically investigates the quantitative relationship between stress and charge signals during coal mass loading.By integrating innovative analytical approaches,introducing quantitative evaluation indices,and developing a charge–stress inversion model,and incorporating underground monitoring practices,significant progress has been achieved in elucidating the correlation between stress variations and charge signals throughout the entire coal mass fracturing process.First,in the field of stress–charge correlation analysis,empirical mode decomposition(EMD)was combined with wavelet coherence analysis for the first time,enabling the removal of slow-varying stress trends while retaining high-frequency fluctuations.This approach allowed for the quantitative characterization of the evolution of coherence between stress variations and charge fluctuations across multiple time scales.Second,coherence skewness and the proportion of high-coherence intervals were innovatively introduced to examine the influence of time scale selection on correlation results.On this basis,a criterion for determining the near-optimal observation scale of charge signals was proposed,providing a quantitative reference for time scale selection in similar signal analyses.Finally,by correlating charge signals with coal damage factors and stress states,a charge-based damage evolution equation was established to achieve effective stress inversion.Combined with in situ monitoring of stress and charge in roadway surrounding rock,this approach revealed the correlation characteristics of stress and charge intensity responses during the dynamic fracturing process.The results indicate,first,that charge signals are not significantly correlated with the absolute stress level of coal but are directly associated with stress variations following coal damage and failure,with the amplitude of charge fluctuations increasing alongside stress fluctuations.Second,coherence between stress and charge signals varies markedly across time scales,with excessively small or large scales leading to distortion,and the scale corresponding to the peak proportion of intervals with coherence>0.8 was identified as the near-optimal observation scale.Third,charge signals can effectively characterize coal damage factors,and the established damage evolution equation can effectively invert stress variation trends.Fourth,in underground roadways,zones of dynamic fracturing in surrounding rock are commonly located in areas where stress concentration overlaps with regions of high charge intensity,further confirming the strong consistency between charge and stress variations.These findings improve the theoretical framework of charge signal responses in loaded coal and provide a scientific basis for precise“stress-charge”monitoring of dynamic disasters,offering practical potential for engineering applications.
基金the financial support from National Natural Science Foundation of China(No.52474029)Strategic and Applied Scientific Research Project of PetroChina Company Limited(2023ZZ18,2023ZZ18YJ04).
文摘In the development of coalbed methane(CBM)reservoirs using multistage fractured horizontal wells,there often exist areas that are either repeatedly stimulated or completely unstimulated between fracturing stages,leading to suboptimal reservoir performance.Currently,there is no well-established method for accurately evaluating the effectiveness of such stimulation.This study introduces,for the first time,the concept of the Fracture Network Bridging Coefficient(FNBC)as a novel metric to assess stimulation performance.By quantitatively coupling the proportions of unstimulated and overstimulated volumes,the FNBC effectively characterizes the connectivity and efficiency of the fracture network.A background grid calibration method is developed to quantify the stage-controlled volume,effectively stimulated volume,unstimulated volume,and repeatedly stimulated volume among different stages of horizontal wells.Furthermore,an optimization model is constructed by taking the FNBC as the objective function and the fracturing injection rate and fluid volume as optimization variables.The Simultaneous Perturbation Stochastic Approximation(SPSA)algorithm is employed to iteratively perturb and optimize these variables,progressively improving the FNBC until the optimal displacement rate and fluid volume corresponding to the maximum FNBC are obtained.Field application in a typical CBM multistage fractured horizontal well in China demonstrates that the FNBC increased from 0.358 to 0.539(a 50.6% improvement),with the injection rate rising from 16 m^(3)/min to 24 m^(3)/min and the average fluid volume per stage increasing from 2490 m^(3) to 3192 m^(3),significantly enhancing the stimulation effectiveness.This research provides theoretical support for designing high-efficiency stimulation strategies in unconventional reservoirs under dynamic limits.
基金Project supported by the Scientific Research and Technical Development Project of Postdoctoral Workstation of PetroChina Southwest Oil and Gas Field Company“Research on fracture morphology control and reconstruction technology of tight sandstone gas reservoir in Jinhua-Zhongtaishan ShaximiaoFormation”(No:20190302-15).
文摘In order to solve the difficulties in the volume fracturing stimulation of Middle Jurassic Shaximiao Formation tight sandstone reservoirs in the Qiulin Block of Central Sichuan Basin and explore the adaptability of high-intensity volumefracturing technology,we selected the outcrop samples of Shaximiao Formation tight sandstone in the Qiulin Block to carry out the physical simulation experiment of true triaxial hydraulic fracturing.On this basis,horizontal well cluster perforation was optimally designed by using the production predictionmodel of staged multi-cluster fracturing horizontal wells.Then,based on the liquid control and proppant increase mode,three rounds of pilot tests were carried out on the tight sandstone reservoirs in this area.Andthe following research resultswere obtained.First,natural fractures in the ShaximiaoFormation tight sandstone reservoir of theQiulin Block are undeveloped,and hydraulic fractures are morphologically dominated by symmetric double-wing fractures,so complex fracture networks can be hardly formed.In addition,the reservoir is of medium to strong water sensitivity,so conventional volume fracturing is not adaptive to the reservoir stimulation in this block.Second,the connotation of high-intensity volume fracturing technology is to carry out multi-cluster perforation in each section to form multiple independent double-wing fractures and to implement the proppant injection mode of liquid control and proppant increase to reduce the inflowfluid while ensuring the high-intensity proppant injection,so as to reduce the damage of inflowfluid to the formation.Third,there are 10 fracturing sections inWell Qiulin 207-5-H2,with 7-12 clusters in each section,and the displacement is in the range of 16-18m^(3)/min.According to the fluid control and proppant increase mode,12146 m^(3) slick water and 4170 t proppant are injected in total.The tested production rate and absolute open flow of natural gas after the fracturing are up to 83.88×10^(4)m^(3)/d and 214.05×10^(4)m^(3)/d,respectively.Fourth,with the decrease of cluster spacing,the cumulative gas production increases gradually,but when the cluster spacing is less than 15 m,the increase amplitude of cumulative gas production decreases.Fifth,when the proppant injection intensity is lower than 6 t/m,the tested gas production per kilometer of stimulated section ina horizontal well overall presents an increasing trend with the increase of proppant injection intensity.When the proppant injection intensity is higher than 6 t/m,however,the tested gas production per kilometer of stimulated section does not increase significantly with the increase of proppant injection intensity.Sixth,as the included angle between the borehole trajectory and the direction ofmaximumhorizontal principal stress increases,the tested gas production per kilometer of stimulated section overall presents an increasing trend.When the hydraulic fracture is nearly perpendicular to the borehole,the effective drainage area is the largest and the tested gas production per kilometer of stimulated section is also the highest.In conclusion,the fracturing mode of high production well has a borehole trajectory of large included angle,perforation cluster spacing of 10 m or so,proppant injection intensity of 5 t/m and large-displacement slick water+continuous injection of combined particle size proppant.
基金supported by the National Major Science and Technology Project"Changning-Weiyuan Shale Gas Development Demonstration Project"(No.:2016ZX05062)PetroChina Major Science and Technology Project"Research and Application of Key Technologies in Gas Production of 30 billion cubic meters in Southwest Oil&Gas Field Company"(No.:2016E-0612).
文摘So far,large-scale development of shale gas wells above 3500 m in the Changning Block of the Sichuan Basin has been realized by means of the large-scale hydraulic fracturing technology.As the main process parameters arefinally set,however,the improvement rate of its stimulation effect tends to slow down,while in North America,single-well production has increased significantly by shortening cluster spacing and increasing proppant volumes.In order to provide a reliable practice basis for optimizing the parameters of shale gas fracturing process,this paper analyzes the productivity increasing mechanism of the new fracturing technology of intensive stageþhigh-intensity proppant injection by virtue of the model for calculating induced stress and multi-stage and multi-cluster productivity of horizontal wells.And accordingly,the main en-gineering factors of fracturing stimulation technology were ascertained.Then,after the pilot test scheme on this new fracturing technology was formulated according to the geological parameters of this block,the pilot test was carried out.Finally,the fracturing process parameters were optimized based on actual production effects and experimental results.And the following research results were obtained.First,shortening the spacing between main fractures,increasing the interference degree of induced stress and improving the stimulation degree of hydraulic fractures to shale reservoirs are the technical keys to the intense stage,and increasing the proppant volume,reducing the influence degree of proppant embedding and breaking on the attenuation of fracture conductivity and ensuring the long-term conductivity of propped fractures are the internal causes of significant production increase through high-intensity proppant injection.Second,the optimized implementation parameters of this new process in the Changning Block are as follows.The cluster spacing is in the range of 15e20 m,the proppant injection intensity is 2.0e2.5 t/m,and the liquid consuming intensity is 30e35 m3/m.It is concluded that this new process increases the single-well production of shale gas wells and the development benefit of the Changning Block and provides technical support for improving the comprehensive development benefit of shale gas wells in this block.
基金supported by the National Natural Science Foundation of China (No.51774111)Henan province science and technology innovation outstanding talent fund of China (No.184200510003)
文摘The height of fractured zone(HFZ) at the high-intensity longwall mining panel plays a vital role in the safety analysis of coal mining under bodies of water. This paper described definitions of the highintensity mining. The processes of overburden failure transfer(OFT) were analyzed, which were divided into the development stage and the termination stage. Through theoretical analysis, the limited suspension-distance and the limited overhanging distance were proposed to judge the damage of each stratum. Mechanical models of strata suspended integrity and overhanging stability were established.A theoretical method to predict the HFZ at the high-intensity longwall mining panel was put forward based on the processes of OFT. Taking a high-intensity longwall mining panel(No. 11915 panel) as an example, the theoretical method proposed, the engineering analogy and the empirical formulas in the Regulation were used to predict the HFZ. The results show that the theoretical result is consistent with the engineering analogies' result and empirical formulas' result. The rationality and reliability of the theoretical method proposed is verified.
基金financially supported by,the Fundamental Research Funds for the Central Universities(Grant No.2023QN1064)the China Postdoctoral Science Foundation(Grant No.2023M733772)Jiangsu Funding Program for Excellent Postdoctoral Talent(Grant No.2023ZB847)。
文摘Prepulse combined hydraulic fracturing facilitates the development of fracture networks by integrating prepulse hydraulic loading with conventional hydraulic fracturing.The formation mechanisms of fracture networks between hydraulic and pre-existing fractures under different prepulse loading parameters remain unclear.This research investigates the impact of prepulse loading parameters,including the prepulse loading number ratio(C),prepulse loading stress ratio(S),and prepulse loading frequency(f),on the formation of fracture networks between hydraulic and pre-existing fractures,using both experimental and numerical methods.The results suggest that low prepulse loading stress ratios and high prepulse loading number ratios are advantageous loading modes.Multiple hydraulic fractures are generated in the specimen under the advantageous loading modes,facilitating the development of a complex fracture network.Fatigue damage occurs in the specimen at the prepulse loading stage.The high water pressure at the secondary conventional hydraulic fracturing promotes the growth of hydraulic fractures along the damage zones.This allows the hydraulic fractures to propagate deeply and interact with pre-existing fractures.Under advantageous loading conditions,multiple hydraulic fractures can extend to pre-existing fractures,and these hydraulic fractures penetrate or propagate along pre-existing fractures.Especially when the approach angle is large,the damage range in the specimen during the prepulse loading stage increases,resulting in the formation of more hydraulic fractures.
基金National Key Research and Development Program of China,2020YFA0711800,Ting LiuNational Natural Science Foundation of China,52274241,Ting Liu,52474261,Ting Liu+2 种基金Basic Research Program of Jiangsu,BK20240207,Ting Liuthe Fundamental Research Funds for the Central Universities(2023KYJD1007)China Postdoctoral Science Foundation(2022M722672).
文摘To elucidate the dynamic characteristics of in-situ methane deflagration in coalbed methane wellbores and its mechanisms for fracturing coal rock,this study first developed a simulation experimental system specifically designed for methane in-situ deflagration fracturing.This experimental system,which is capable of withstanding pressures up to 150 MPa and meanwhile applying axial and confining pressures of up to 50 MPa to rock cores,enables the coupled simulation on methane deflagration and rock core fracturing processes.With the aid of this experimental system,physical simulation experiments on in-situ methane deflagration fracturing were conducted,and the following findings were obtained.Methane deflagration loads in enclosed wellbores exhibit characteristics of multi-level pulsed oscillation.With the rise of initial gas pressure,the peak deflagration load increases approximately linearly,with the pressure amplification factor spanning from 23.14 to 31.10,and its peak loading rate grows exponentially.Accordingly,the fracture volume and fracture porosity augment.To be specific,when the initial gas pressure rises from 0.6 to 2.4 MPa,the fracture volume and fracture porosity augment by factors of 14.0 and 8.73,respectively.The fractal dimension of spatial distribution of fractures also increases with the rise of deflagration load,indicating that a higher deflagration load conduces to the development of a larger and more complex fracture network.Methane deflagration fracturing is characterized as a composite fracture mode that involves the impact of strong stress waves and the driving force of high-pressure fluids.The primary factors influencing damage to coal-rock include the high-stress impact in the initial stage of deflagration,the fluid pressure driving effect in the middle stage,and the thermal shock resulting from high temperatures in the later stage.
基金supported by Yunlong Lake Laboratory of Deep Underground Science and Engineering Project(No.104024008)the National Natural Science Foundation of China(Nos.52274241 and 52474261)the Natural Science Foundation of Jiangsu Province(No.BK20240207).
文摘Through a case analysis,this study examines the spatiotemporal evolution of microseismic(MS)events,energy characteristics,volumetric features,and fracture network development in surface well hydraulic fracturing.A total of 349 MS events were analyzed across different fracturing sections,revealing significant heterogeneity in fracture propagation.Energy scanning results showed that cumulative energy values ranged from 240 to 1060 J across the sections,indicating notable differences.Stimulated reservoir volume(SRV)analysis demonstrated well-developed fracture networks in certain sections,with a total SRV exceeding 1540000 m^(3).The hydraulic fracture network analysis revealed that during the midfracturing stage,the density and spatial extent of MS events significantly increased,indicating rapid fracture propagation and the formation of complex networks.In the later stage,the number of secondary fractures near fracture edges decreased,and the fracture network stabilized.By comparing the branching index,fracture length,width,height,and SRV values across different fracturing sections,Sections No.1 and No.8 showed the best performance,with high MS event densities,extensive fracture networks,and significant energy release.However,Sections No.4 and No.5 exhibited sparse MS activity and poor fracture connectivity,indicating suboptimal stimulation effectiveness.
文摘With the increasing demand for energy,traditional oil resources are facing depletion and insufficient supply.Many countries are rapidly turning to the development of unconventional oil and gas resources.Among them,shale oil and gas reservoirs have become the focus of unconventional oil and gas resources exploration and development.Based on the characteristics of shale oil and gas reservoirs,supercritical CO_(2) fracturing is more conducive to improving oil recovery than other fracturing technologies.In this paper,the mechanism of fracture initiation and propagation of supercritical CO_(2) in shale is analyzed,including viscosity effect,surface tension effect,permeation diffusion effect of supercritical CO_(2),and dissolution-adsorption effect between CO_(2) and shale.The effects of natural factors,such as shale properties,bedding plane and natural fractures,and controllable factors,proppant,temperature,pressure,CO_(2) concentration and injection rate on fracture initiation and propagation are clarified.The methods of supercritical CO_(2) fracturing process,thickener and proppant optimization to improve the efficiency of supercritical CO_(2) fracturing are discussed.In addition,some new technologies of supercritical CO_(2) fracturing are introduced.The challenges and prospects in the current research are also summarized.For example,supercritical CO_(2) is prone to filtration when passing through porous media,and it is difficult to form a stable flow state.Therefore,in order to achieve stable fracturing fluid suspension and effectively support fractu res,it is urge nt to explo re new fracturing fluid additives or improve fracturing fluid formulations combined with the research of new proppants.This paper is of great significance for understanding the behavior mechanism of supercritical CO_(2) in shale and optimizing fracturing technology.
基金Australian Research Council Linkage Program(LP200301404)for sponsoring this researchthe financial support provided by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Chengdu University of Technology,SKLGP2021K002)National Natural Science Foundation of China(52374101,32111530138).
文摘Discrete fracture network(DFN)commonly existing in natural rock masses plays an important role in geological complexity which can influence rock fracturing behaviour during fluid injection.This paper simulated the hydraulic fracturing process in lab-scale coal samples with DFNs and the induced seismic activities by the discrete element method(DEM).The effects of DFNs on hydraulic fracturing,induced seismicity and elastic property changes have been concluded.Denser DFNs can comprehensively decrease the peak injection pressure and injection duration.The proportion of strong seismic events increases first and then decreases with increasing DFN density.In addition,the relative modulus of the rock mass is derived innovatively from breakdown pressure,breakdown fracture length and the related initiation time.Increasing DFN densities among large(35–60 degrees)and small(0–30 degrees)fracture dip angles show opposite evolution trends in relative modulus.The transitional point(dip angle)for the opposite trends is also proportionally affected by the friction angle of the rock mass.The modelling results have much practical meaning to infer the density and geometry of pre-existing fractures and the elastic property of rock mass in the field,simply based on the hydraulic fracturing and induced seismicity monitoring data.
基金funded by the National Natural Scientific Foundation of China(Nos.52304008,52404038,52474043)the China Postdoctoral Science Foundation(No.2023MD734223)+1 种基金the Key Laboratory of Well Stability and Fluid&Rock Mechanics in Oil and Gas Reservoir of Shaanxi Province(No.23JS047)the Youth Talent Lifting Program of Xi'an Science and Technology Association(No.959202413078)。
文摘Supercritical CO_(2)(SC-CO_(2))fracturing stands out a promising waterless stimulation technique in the development of unconventional resources.While numerous studies have delved into the inducedfracture mechanism of SC-CO_(2),the small scale of rock samples and synthetic materials used in many studies have limited a comprehensive understanding of fracture propagation in unconventional formations.In this study,cubic tight sandstone samples with dimensions of 300 mm were employed to conduct SC-CO_(2)fractu ring experiments under true-triaxial stre ss conditions.The spatial morphology and quantitative attributes of fracture induced by water and SC-CO_(2)fracturing were compared,while the impact of in-situ stress on fracture propagation was also investigated.The results indicate that the SCCO_(2)fracturing takes approximately ten times longer than water fracturing.Furthermore,under identical stress condition,the breakdown pressure(BP)for SC-CO_(2)fracturing is nearly 25%lower than that for water fracturing.A quantitative analysis of fracture morphology reveals that water fracturing typically produces relatively simple fracture pattern,with the primary fracture distribution predominantly controlled by bedding planes.In contrast,SC-CO_(2)fracturing results in a more complex fracture morphology.As the differential of horizontal principal stress increases,the BP for SC-CO_(2)fractured rock exhibits a downward trend,and the induced fracture morphology becomes more simplified.Moreover,the presence of abnormal in-situ stress leads to a further increase in the BP for SC-CO_(2)fracturing,simultaneously enhancing the development of a more conductive fracture network.These findings provide critical insights into the efficiency and behavior of SC-CO_(2)fracturing in comparison to traditional water-based fracturing,offering valuable implication for its potential applications in unconventional reservoirs.
基金supported by the National Natural Science Foun-dation of China(52421002,U24B6001,52204019,and 52192624)the Open Foundation of the Shanxi Key Laboratory of Carbon Dioxide Sequestration and Enhanced Oil Recovery。
文摘Medium-high maturity continental shale oil is one of the hydrocarbon resources with the most potential for successful development in China.Nevertheless,the unique geological conditions of a multi-lithologic superposition shield the vertical propagation of hydraulic fractures and limit the longitudinal reconstruction in reservoirs,posing a great challenge for large-scale volumetric fracturing.Radial wellbore crosslayer fracturing,which transforms the interaction between the hydraulic fractures and lithologic interface into longitudinal multilayer competitive initiation,could provide a potential solution for this engineering challenge.To determine the longitudinal propagation behaviors of fractures guided by radial wellbores,true triaxial fracturing experiments were performed on multilayer shale-sandstone samples,with a focus on the injection pressure response,fracture morphology,and cross-layer pattern.The effects of the radial borehole length L,vertical stress difference K_(v),injection rate Q,and viscosity m of the fracturing fluid were analyzed.The results indicate that radial wellbores can greatly facilitate fracture initiation and cross-layer propagation.Unlike conventional hydraulic fracturing,there are two distinct fracture propagation patterns in radial wellbore fracturing:cross-layering and skip-layering.The fracture height guided by a radial wellbore is positively correlated with K_(v),Q,and m.Increasing these parameters causes a shift in the fracture initiation from a single root to an asynchronous root/toe end and can improve the cross-layer propagation capacity.Critical parameter thresholds exist for fracture propagation through and across interlayers under the guidance of radial boreholes.A parameter combination of critical cross-layering/skip-layering or alternating displacement/viscosity is recommended to simultaneously improve the fracture height and degree of lateral activation.The degree of correlation of different parameters with the vertical fracture height can be written as L>Q/m>K_(v).Increasing the radial wellbore length can effectively facilitate fracture cross-/skip-layer propagation and reduce the critical threshold of injection parameters,which is conducive to maximizing the stimulated reservoir volume.
基金financially supported by the National Natural Science Foundation of China(Nos.51874236 and 52174207)Shaanxi Science and Technology Innovation Team(No.2022TD02)Henan University of Science and Technology PhD Funded Projects(No.B2025-9)。
文摘To more accurately describe the coal damage and fracture evolution law during liquid nitrogen(LN_(2))fracturing under true triaxial stress,a thermal-hydraulic-mechanical-damage(THMD)coupling model for LN_(2) fracturing coal was developed,considering the coal heterogeneity and thermophysical parameters of nitrogen.The accuracy and applicability of model were verified by comparing with LN_(2) injection pre-cooling and fracturing experimental data.The effects of different pre-cooling times and horizontal stress ratios on coal damage evolution,permeability,temperature distribution,and fracture characteristics were analyzed.The results show that the permeability and damage of the coal increase exponentially,while the temperature decreases exponentially during the fracturing process.As the pre-cooling time increases,the damage range of the coal expands,and the fracture propagation becomes more pronounced.The initiation pressure and rupture pressure decrease and tend to stabilize with longer precooling times.As the horizontal stress ratio increases,fractures preferentially extend along the direction of maximum horizontal principal stress,leading to a significant decrease in both initiation and rupture pressures.At a horizontal stress ratio of 3,the initiation pressure drops by 48.07%,and the rupture pressure decreases by 41.36%.The results provide a theoretical basis for optimizing LN_(2) fracturing techniques and improving coal seam modification.
基金supported by the National Key Research and Development Program(No.2022YFE0122000)National Natural Science Foundation of China under Grant Nos.52234009,52274383,52222409,and 52201113。
文摘Two sets of alloys,Mg-Zn-Ca-xNi(0≤x≤5),have been developed with tunable corrosion and mechanical properties,optimized for fracturing materials.High-zinc artificial aged(T6)Mg-12Zn-0.5Ca-x Ni(0≤x≤5)series,featuring a straightforward preparation method and the potential for manufacturing large-scale components,exhibit notable corrosion rates up to 29 mg cm^(-2)h^(-1)at 25℃ and 643 mg cm^(-2)h^(-1)at 93℃.The high corrosion rate is primary due to the Ni–containing second phases,which intensify the galvanic corrosion that overwhelms their corrosion barrier effect.Low-zinc rolled Mg-1.5Zn-0.2Ca-x Ni(0≤x≤5)series,characterizing excellent deformability with an elongation to failure of~26%,present accelerated corrosion rates up to 34 mg cm^(-2)h^(-1)at 25℃ and 942 mg cm^(-2)h^(-1)at 93℃.The elimination of corrosion barrier effect via deformation contributes to the further increase of corrosion rate compared to the T6 series.Additionally,Mg-Zn-Ca-xNi(0≤x≤5)alloys exhibit tunable ultimate tensile strengths ranging from~190 to~237 MPa,depending on their specific composition.The adjustable corrosion rate and mechanical properties render the Mg-Zn-Ca-x Ni(0≤x≤5)alloys suitable for fracturing materials.
基金Supported by the National High-Tech Research Project(GJSCB-HFGDY-2024-004)National Natural Science Foundation of China(12402305)+2 种基金Postdoctoral Fellowship Program of CPSF(GZC20232200)China Postdoctoral Science Foundation(2024M762703)Sichuan Science and Technology Program(2025ZNSFSC1352)。
文摘The Carter model is used to characterize the dynamic behaviors of fracture growth and fracturing fluid leakoff.A thermo-fluid coupling temperature response forward model is built considering the fluid flow and heat transfer in wellbore,fracture and reservoir.The influences of fracturing parameters and fracture parameters on the responses of distributed temperature sensing(DTS)are analyzed,and a diagnosis method of fracture parameters is presented based on the simulated annealing algorithm.A field case study is introduced to verify the model’s reliability.Typical V-shaped characteristics can be observed from the DTS responses in the multi-cluster fracturing process,with locations corresponding to the hydraulic fractures.The V-shape depth is shallower for a higher injection rate and longer fracturing and shut-in time.Also,the V-shape is wider for a higher fracture-surface leakoff coefficient,longer fracturing time and smaller fracture width.Additionally,the cooling effect near the wellbore continues to spread into the reservoir during the shut-in period,causing the DTS temperature to decrease instead of rise.Real-time monitoring and interpretation of DTS temperature data can help understand the fracture propagation during fracturing operation,so that immediate measures can be taken to improve the fracturing performance.
基金supported by the National Natural Science Foundation of China(Grant No.52404155)State Key Laboratory of Mining Disaster Prevention and Control(Shandong University of Science and Technology)+1 种基金Ministry of Education(Grant No.JMDPC202402)supported by the opening project of State Key Laboratory of Explosion Science and Safety Protection(Beijing Institute of Technology).The opening project number is KFJJ24-20M.
文摘Aiming at mitigating the high risks associated with conventional explosive blasting,this study developed a safe directional fracturing technique,i.e.instantaneous expansion with a single fracture(IESF),using a coal-based solid waste expanding agent.First,the mechanism of directional fracturing blasting by the IESF was analyzed,and the criterion of directional crack initiation was established.On this basis,laboratory experiments and numerical simulations were conducted to systematically evaluate the directional fracturing blasting performance of the IESF.The results indicate that the IESF presents an excellent directional fracturing effect,with average surface undulation differences ranging from 8.1 mm to 22.7 mm on the fracture surfaces.Moreover,during concrete fracturing tests,the stresses and strains in the fracturing direction are measured to be 2.16-3.71 times and 8 times larger than those in the nonfracturing direction,respectively.Finally,the IESF technique was implemented for no-pillar mining with gob-side entry retaining through roof cutting and pressure relief in an underground coal mine.The IESF technique effectively created directional cracks in the roof without causing severe roadway deformation,achieving an average cutting rate and maximum roadway deformation of 94%and 197 mm,respectively.These on-site test results verified its excellent directional rock fracturing performance.The IESF technique,which is safe,efficient,and green,has considerable application prospects in the field of rock mechanics and engineering.
基金funded by the General Program of the National Natural Science Foundation of China(52274058,52174052,52474058)the Central Program of Basic Science of the National Natural Science Foundation of China(72088101)the"Enlisting and Leading"Science and Technology Project of Heilongjiang Province(RIPED-2022-JS-1740 and RIPED-2022-JS-1853).
文摘The development of shale reservoirs is important in ensuring China’s national energy security by achiev-ing energy independence.Among the key technologies for shale oil production,CO_(2) fracturing is an effec-tive method that can not only enhance oil recovery but also promote large amounts of CO_(2) storage,thereby supporting China’s goals of achieving a carbon peak and carbon neutrality.This research paper aims to study the impacts and prospective applications of CO_(2) fracturing in shale reservoirs,using real exploitation parameters from the Gulong shale reservoir well 1(GYYP1)well in the Songliao Basin.By utilizing numerical simulation,the dynamics of CO_(2) production are analyzed.Adsorption and diffusion are identified as pivotal mechanisms for CO_(2) storage in shale reservoirs.After the analysis of the fractur-ing process,approximately 22.13%of CO_(2) is found to be adsorbed,which decreases to 11.06%after ten years due to pressure decline.Diffusion increases the volume of CO_(2) interacting with a greater extent of shale,thereby enhancing the adsorption mechanism.Over time,the diffusion process results in a remarkable increase of 26.02%in CO_(2) adsorption,ensuring the long-term and stable storage of CO_(2) within the shale reservoir.This investigation delves into the contribution of these two crucial mechanisms of CO_(2) storage in shale reservoirs,ultimately predicting that,by 2030,approximately two million tons of CO_(2) can be effectively stored in the Daqing Oilfield through CO_(2) fracturing in shale oil reservoirs.Such an achievement will undoubtedly contribute to the sustainable development of the energy sector and foster the transformation and upgrading of China’s energy structure.
基金Project supported by the National Natural Science Foundation of China(No.42202314)。
文摘A coupled thermal-hydro-mechanical cohesive phase-field model for hydraulic fracturing in deep coal seams is presented.Heat exchange between the cold fluid and the hot rock is considered,and the thermal contribution terms between the cold fluid and the hot rock are derived.Heat transfer obeys Fourier's law,and porosity is used to relate the thermodynamic parameters of the fracture and matrix domains.The net pressure difference between the fracture and the matrix is neglected,and thus the fluid flow is modeled by the unified fluid-governing equations.The evolution equations of porosity and Biot's coefficient during hydraulic fracturing are derived from their definitions.The effect of coal cleats is considered and modeled by Voronoi polygons,and this approach is shown to have high accuracy.The accuracy of the proposed model is verified by two sets of fracturing experiments in multilayer coal seams.Subsequently,the differences in fracture morphology,fluid pressure response,and fluid pressure distribution between direct fracturing of coal seams and indirect fracturing of shale interlayers are explored,and the effects of the cluster number and cluster spacing on fracture morphology for multi-cluster fracturing are also examined.The numerical results show that the proposed model is expected to be a powerful tool for the fracturing design and optimization of deep coalbed methane.
