There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution...There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.展开更多
Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicate...Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.展开更多
High-frequency pulsed(HFP)gas tungsten arc welding(GTAW)has shown excellent performance in welding of aluminum alloys in recent years,which makes itself a promisingly potential technique for part manufacturing in avia...High-frequency pulsed(HFP)gas tungsten arc welding(GTAW)has shown excellent performance in welding of aluminum alloys in recent years,which makes itself a promisingly potential technique for part manufacturing in aviation industry.However,existing researches generally focuses on the effect of a single parameter while lacks multivariable researches.Considering of the fact that gap and misalignment are inevitable in real part clamping,adaptive intelligent welding is usually used during automatic manufacturing,which means under the control of filler wire amount per length of a weld,other parameters including current,welding speed and wire feed speed during one single weld are changing according to the specific clamping situation.Therefore,the influence of specific energy input led by different welding parameters within one adaptive welding program on microstructure and mechanical property of the weld needs to be clarified.This study investigates the effect of welding heat input(ranging from 1048.3 J/mm to 825.6 J/mm within one adaptive welding program control)on the formation quality of 3.25 mm thick 6061 aluminum alloy joints fabricated by HFP-GTAW with 4043 filler wire.According to the obtained results,non-monotonic relationship between heat input and porosity,with an optimal minimum of 4.92%achieved at an intermediate heat input of 856.8 J/mm.The 21.2%decrease of energy input during welding process would reduce the average grain size in the weld center and adjacent to fusion line by 18.6%and 19.4%,respectively.The ratios between fluctuation range to minimum value in average yield and the relative ranges of yield strength and ultimate tensile strength across the tested heat inputs were 14.7%and 12.7%,respectively.The findings provide a general overview on how the microstructure and mechanical properties would fluctuate in an adaptively controlled HFP-GTAW fabricated aluminum alloy weld.展开更多
A new type of variable polarity welding power modulated with high-frequency pulse current is developed. Series of high-frequency pulse current is superimposed on direct-current-electrode-negative （DCEN）, which can i...A new type of variable polarity welding power modulated with high-frequency pulse current is developed. Series of high-frequency pulse current is superimposed on direct-current-electrode-negative （DCEN）, which can improve the crystallization process in the weld bead as a result of the electromagnetic force generated by pulse current. Digital signal processor （DSP） is used to realize the closed-loop control of the first inverter, variable polarity output of the second inverter and high-frequency pulse current superposition.展开更多
The oil-based mud(OBM) borehole measurement environment presents significant limitations on the application of existing electrical logging instruments in high-resistance formations. In this paper, we propose a novel l...The oil-based mud(OBM) borehole measurement environment presents significant limitations on the application of existing electrical logging instruments in high-resistance formations. In this paper, we propose a novel logging method for detection of high-resistance formations in OBM using highfrequency electrodes. The method addresses the issue of shallow depth of investigation(DOI) in existing electrical logging instruments, while simultaneously ensuring the vertical resolution. Based on the principle of current continuity, the total impedance of the loop is obtained by equating the measurement loop to the series form of a capacitively coupled circuit. and its validity is verified in a homogeneous formation model and a radial two-layer formation model with a mud standoff. Then, the instrument operating frequency and electrode system parameters were preferentially determined by numerical simulation, and the effect of mud gap on impedance measurement was investigated. Subsequently, the DOI of the instrument was investigated utilizing the pseudo-geometric factor defined by the real part of impedance. It was determined that the detection depth of the instrument is 8.74 cm, while the effective vertical resolution was not less than 2 cm. Finally, a focused high-frequency electrode-type instrument was designed by introducing a pair of focused electrodes, which effectively enhanced the DOI of the instrument and was successfully deployed in the Oklahoma formation model. The simulation results demonstrate that the novel method can achieve a detection depth of 17.40 cm in highly-resistive formations drilling with OBM, which is approximately twice the depth of detection of the existing oil-based mud microimager instruments. Furthermore, its effective vertical resolution remains at or above 2 cm,which is comparable to the resolution of the existing OBM electrical logging instrument.展开更多
Objective:To analyze the significance of high-frequency ultrasound in differentiating benign and malignant breast micronodules.Methods:Eighty-five patients with breast micronodules admitted for diagnosis between Octob...Objective:To analyze the significance of high-frequency ultrasound in differentiating benign and malignant breast micronodules.Methods:Eighty-five patients with breast micronodules admitted for diagnosis between October 2022 and October 2024 were selected for high-frequency ultrasound diagnosis.The diagnostic efficacy of high-frequency ultrasound was evaluated by comparing it with the results of surgical pathology.Results:High-frequency ultrasound detected 50 benign nodules,primarily breast fibroadenomas,and 35 malignant nodules,mainly breast ductal carcinoma in situ.Based on surgical pathology results,the diagnostic accuracy of high-frequency ultrasound was 96.47%,specificity was 97.96%,and sensitivity was 94.44%.In high-frequency ultrasound diagnosis,the proportion of grade III and IV blood flow in malignant nodules was higher than that in benign nodules,while the proportion of regular shape and clear margins was lower.The proportion of microcalcifications and posterior echo attenuation was higher in malignant nodules,and the resistance index(RI)and peak blood flow velocity were lower than those in benign nodules(P<0.05).Conclusion:High-frequency ultrasound can effectively differentiate benign and malignant breast micronodules,determine specific nodule types,and exhibits high diagnostic accuracy and sensitivity.Additionally,benign and malignant nodules can be differentiated based on the grading of blood flow signals,sonographic features,and blood flow velocity,providing reasonable guidance for subsequent treatment plans.展开更多
China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and dis...China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and discontinuous,and there is no definite geological law to follow,which seriously threatens the safety of coal mine production and personnel life.Conventional ground geophysical methods have low accuracy in detecting goaf areas affected by mechanical interference from open-pit mines,especially for waterless goaf areas,which cannot be detected by existing methods.This article proposes the use of high-frequency electromagnetic waves for goaf detection.The feasibility of using drilling radar to detect goaf was theoretically analyzed,and a goaf detection model was established.The response characteristics of different fillers in the goaf under different frequencies of high-frequency electromagnetic waves were simulated and analyzed.In a certain open-pit mine in Inner Mongolia,100MHz high-frequency electromagnetic waves were used to detect the goaf through directional drilling on the ground.After detection,excavation verification was carried out,and the location of one goaf detected was verified.The results of engineering practice show that the application of high-frequency electromagnetic waves in goaf detection expands the detection radius of boreholes,has the advantages of high efficiency and accuracy,and has important theoretical and practical significance.展开更多
New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed s...New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.展开更多
Objective:To analyze the therapeutic effect of high-frequency electrosurgical knife surgery guided by painless digestive endoscopy(PDE)in elderly patients with gastrointestinal polyps(GP).Methods:A total of 100 elderl...Objective:To analyze the therapeutic effect of high-frequency electrosurgical knife surgery guided by painless digestive endoscopy(PDE)in elderly patients with gastrointestinal polyps(GP).Methods:A total of 100 elderly GP patients admitted between June 2021 and December 2022 were selected.Patients were randomly divided into two groups:the painless group(50 cases)underwent high-frequency electrosurgical knife surgery guided by PDE,while the conventional group(50 cases)underwent the same surgery guided by traditional digestive endoscopy(DE).The total treatment efficacy,perioperative indicators,gastrointestinal hormone levels,oxidative stress(OS)markers,and complication rates were compared between the two groups.Results:The total treatment efficacy in the painless group was higher than that in the conventional group,and perioperative indicators were superior in the painless group(P<0.05).One week after treatment,the gastrointestinal hormone levels and OS-related markers in the painless group were better than those in the conventional group(P<0.05).The complication rate in the painless group was lower than in the conventional group(P<0.05).Conclusion:High-frequency electrosurgical knife surgery guided by PDE improves the effectiveness of polyp removal in elderly GP patients and accelerates postoperative recovery.It also protects gastrointestinal function,reduces postoperative OS,and ensures higher surgical safety.展开更多
Single-shot ultrafast compressed imaging(UCI)is an effective tool for studying ultrafast dynamics in physics,chemistry,or material science because of its excellent high frame rate and large frame number.However,the ra...Single-shot ultrafast compressed imaging(UCI)is an effective tool for studying ultrafast dynamics in physics,chemistry,or material science because of its excellent high frame rate and large frame number.However,the random code(Rcode)used in traditional UCI will lead to low-frequency noise covering high-frequency information due to its uneven sampling interval,which is a great challenge in the fidelity of large-frame reconstruction.Here,a high-frequency enhanced compressed active photography(H-CAP)is proposed.By uniformizing the sampling interval of R-code,H-CAP capture the ultrafast process with a random uniform sampling mode.This sampling mode makes the high-frequency sampling energy dominant,which greatly suppresses the low-frequency noise blurring caused by R-code and achieves high-frequency information of image enhanced.The superior dynamic performance and large-frame reconstruction ability of H-CAP are verified by imaging optical self-focusing effect and static object,respectively.We applied H-CAP to the spatial-temporal characterization of double-pulse induced silicon surface ablation dynamics,which is performed within 220 frames in a single-shot of 300 ps.H-CAP provides a high-fidelity imaging method for observing ultrafast unrepeatable dynamic processes with large frames.展开更多
Soft magnetic composites made from metallic magnetic particles with an easy magnetization plane(referred to as easy-plane metallic soft magnetic composites(SMC))are considered ideal materials for the next generation o...Soft magnetic composites made from metallic magnetic particles with an easy magnetization plane(referred to as easy-plane metallic soft magnetic composites(SMC))are considered ideal materials for the next generation of power electronic devices.This advantage is attributed to their ability to maintain high permeability at elevated frequencies.Despite these advantages,a definitive mathematical model that connects the high-frequency magnetic properties(e.g.,effective permeability)of easy-plane metallic SMCs to the intrinsic properties of the particles is still lacking.In this work,a theoretical calculation model for the effective permeability of easy-plane metallic SMCs was formulated.This model was derived from a skin effect-corrected Landau-Lifshitz-Gilbert(LLG)equation and integrated with effective medium theory incorporating inter-particle interaction.To validate the model,we prepared samples of easy-plane Y_(2)Co_(17)particle/PU SMCs with varying particle sizes and volume fractions.The experimental results showed a strong agreement with the calculated values.This research offers critical theoretical backing for the design and optimization of soft magnetic materials intended for high-frequency applications.展开更多
With the evolution of DC distribution networks from traditional radial topologies to more complex multi-branch structures,the number of measurement points supporting synchronous communication remains relatively limite...With the evolution of DC distribution networks from traditional radial topologies to more complex multi-branch structures,the number of measurement points supporting synchronous communication remains relatively limited.This poses challenges for conventional fault distance estimation methods,which are often tailored to simple topologies and are thus difficult to apply to large-scale,multi-node DC networks.To address this,a fault distance estimation method based on sparse measurement of high-frequency electrical quantities is proposed in this paper.First,a preliminary fault line identification model based on compressed sensing is constructed to effectively narrow the fault search range and improve localization efficiency.Then,leveraging the high-frequency impedance characteristics and the voltage-current relationship of electrical quantities,a fault distance estimation approach based on high-frequency measurements from both ends of a line is designed.This enables accurate distance estimation even when the measurement devices are not directly placed at both ends of the faulted line,overcoming the dependence on specific sensor placement inherent in traditional methods.Finally,to further enhance accuracy,an optimization model based on minimizing the high-frequency voltage error at the fault point is introduced to reduce estimation error.Simulation results demonstrate that the proposed method achieves a fault distance estimation error of less than 1%under normal conditions,and maintains good performance even under adverse scenarios.展开更多
Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively invest...Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.展开更多
The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model ...The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model for epoxy resin encapsulated nano HFTs, which aims to precisely predict the temperature distribution inside the transformer in combination with the finite element method(FEM). A magnetothermal bidirectional coupling 3DTN model is established by analyzing the thermal conduction between the core, windings, and epoxy resin, while also considering the convection and radiation heat transfer mechanisms on the surface of the epoxy resin. The model considers the impact of loss distribution in the core and windings on the temperature field and adopts a simplified 1/2 thermal network model to reduce computational complexity. Furthermore, the results of FEM are compared with experimental results to verify the accuracy of the 3DTN model in predicting the temperature rise of nano HFT. The results show that the 3DTN model reduces errors by an average of 5.25% over the traditional two-dimensional thermal network(2DTN) model, particularly for temperature distributions in the windings and core. This paper provides a temperature rise prediction method for the thermal design and offers a theoretical basis and engineering guidance for the optimization of their thermal management systems.展开更多
Magnesium-rare earth(Mg-RE)alloys are pivotal for lightweight applications in aerospace and advanced engineering due to their high specific strength.However,manufacturing large-scale complex components via monolithic ...Magnesium-rare earth(Mg-RE)alloys are pivotal for lightweight applications in aerospace and advanced engineering due to their high specific strength.However,manufacturing large-scale complex components via monolithic casting is challenging owing to defects such as RE oxides and shrinkage porosity,making fusion welding essential for both defect repair and structural joining.This review comprehensively examines recent advances in fusion welding of Mg-RE alloys,with emphasis on the interplay between their unique physicochemical properties and welding metallurgy.Various fusion welding methods suitable for Mg-RE alloys are compared and analyzed.Detailed characterization of joint regions reveals how thermal gradients and cooling rates govern phase evolution,grain morphology,and defect formation.Moreover,welding parameters and heat treatment strategies are systematically discussed for the microstructural configuration,especially for the inherent conflicts between grain coarsening in fusion zone and eutectic dissolution in heat-affected zone.Future research directions are also outlined.By correlating Mg-RE alloy properties with fusion welding processes,this review provides practical insights for designing reliable welded structures in critical applications.展开更多
The corrosion resistance of base metal,laser-arc hybrid welded AZ31B magnesium alloys with and without addition of carbon nanotubes(CNTs)was compared.The corrosion behaviors and the underlying improvement mechanism of...The corrosion resistance of base metal,laser-arc hybrid welded AZ31B magnesium alloys with and without addition of carbon nanotubes(CNTs)was compared.The corrosion behaviors and the underlying improvement mechanism of CNTs were systematically investigated.The introduction of CNTs effectively refined the grains,weakened the texture and enhanced the microstructure homogeneity of the weld,which contributed to the enhancement of corrosion resistance.Specifically,the corrosion rates of hydrogen evolution and weight loss of weld decreased by>30%after the addition of CNTs,and the corrosion products were denser due to the formation of Al_(2)O_(3)passive film.The corrosion current density and polarization resistance of weld with addition of CNTs were 1.220μA/cm^(2)and 7155·cm^(2),respectively,in contrast to 2.480μA/cm^(2)and approximately 269.5·cm^(2)for the weld without CNTs.Besides,the content of precipitates in the weld increased from 0.60%to 1.76%after the addition of CNTs,which can release Al^(3+)ions,promoting the formation of a dense Al_(2)O_(3)film that serves to protect the metal matrix from further degradation.展开更多
Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining...Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.展开更多
基金supported by the National Nature Science Foundation of China(Nos.12027901 and 12041202)Synchrotron Radiation Joint Fund of University of Science and Technology of China(Nos.KY2090000059 and KY2090000054)。
文摘There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.
基金Project supported by the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Science and ICT(No.RS-2024-00337001)。
文摘Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.
基金supported by the Commercial Aircraft Corporation of China Ltd.(Grant No.COMAC-SFGS-2024–569)Fundamental Research Funds for the Central Universities and Institute of Marine Equipment,Shanghai Rising-Star Program of Science and Technology Commission of Shanghai Municipality(Grant No.23QA1404700)+1 种基金National Natural Science Foundation of China(Grant No.52475384,52505409)China Postdoctoral Science Foundation(Grant No.2024M761963)。
文摘High-frequency pulsed(HFP)gas tungsten arc welding(GTAW)has shown excellent performance in welding of aluminum alloys in recent years,which makes itself a promisingly potential technique for part manufacturing in aviation industry.However,existing researches generally focuses on the effect of a single parameter while lacks multivariable researches.Considering of the fact that gap and misalignment are inevitable in real part clamping,adaptive intelligent welding is usually used during automatic manufacturing,which means under the control of filler wire amount per length of a weld,other parameters including current,welding speed and wire feed speed during one single weld are changing according to the specific clamping situation.Therefore,the influence of specific energy input led by different welding parameters within one adaptive welding program on microstructure and mechanical property of the weld needs to be clarified.This study investigates the effect of welding heat input(ranging from 1048.3 J/mm to 825.6 J/mm within one adaptive welding program control)on the formation quality of 3.25 mm thick 6061 aluminum alloy joints fabricated by HFP-GTAW with 4043 filler wire.According to the obtained results,non-monotonic relationship between heat input and porosity,with an optimal minimum of 4.92%achieved at an intermediate heat input of 856.8 J/mm.The 21.2%decrease of energy input during welding process would reduce the average grain size in the weld center and adjacent to fusion line by 18.6%and 19.4%,respectively.The ratios between fluctuation range to minimum value in average yield and the relative ranges of yield strength and ultimate tensile strength across the tested heat inputs were 14.7%and 12.7%,respectively.The findings provide a general overview on how the microstructure and mechanical properties would fluctuate in an adaptively controlled HFP-GTAW fabricated aluminum alloy weld.
文摘A new type of variable polarity welding power modulated with high-frequency pulse current is developed. Series of high-frequency pulse current is superimposed on direct-current-electrode-negative （DCEN）, which can improve the crystallization process in the weld bead as a result of the electromagnetic force generated by pulse current. Digital signal processor （DSP） is used to realize the closed-loop control of the first inverter, variable polarity output of the second inverter and high-frequency pulse current superposition.
基金the National Natural Science Foundation of China(42074134,42474152,42374150)CNPC Innovation Found(2024DQ02-0152).
文摘The oil-based mud(OBM) borehole measurement environment presents significant limitations on the application of existing electrical logging instruments in high-resistance formations. In this paper, we propose a novel logging method for detection of high-resistance formations in OBM using highfrequency electrodes. The method addresses the issue of shallow depth of investigation(DOI) in existing electrical logging instruments, while simultaneously ensuring the vertical resolution. Based on the principle of current continuity, the total impedance of the loop is obtained by equating the measurement loop to the series form of a capacitively coupled circuit. and its validity is verified in a homogeneous formation model and a radial two-layer formation model with a mud standoff. Then, the instrument operating frequency and electrode system parameters were preferentially determined by numerical simulation, and the effect of mud gap on impedance measurement was investigated. Subsequently, the DOI of the instrument was investigated utilizing the pseudo-geometric factor defined by the real part of impedance. It was determined that the detection depth of the instrument is 8.74 cm, while the effective vertical resolution was not less than 2 cm. Finally, a focused high-frequency electrode-type instrument was designed by introducing a pair of focused electrodes, which effectively enhanced the DOI of the instrument and was successfully deployed in the Oklahoma formation model. The simulation results demonstrate that the novel method can achieve a detection depth of 17.40 cm in highly-resistive formations drilling with OBM, which is approximately twice the depth of detection of the existing oil-based mud microimager instruments. Furthermore, its effective vertical resolution remains at or above 2 cm,which is comparable to the resolution of the existing OBM electrical logging instrument.
文摘Objective:To analyze the significance of high-frequency ultrasound in differentiating benign and malignant breast micronodules.Methods:Eighty-five patients with breast micronodules admitted for diagnosis between October 2022 and October 2024 were selected for high-frequency ultrasound diagnosis.The diagnostic efficacy of high-frequency ultrasound was evaluated by comparing it with the results of surgical pathology.Results:High-frequency ultrasound detected 50 benign nodules,primarily breast fibroadenomas,and 35 malignant nodules,mainly breast ductal carcinoma in situ.Based on surgical pathology results,the diagnostic accuracy of high-frequency ultrasound was 96.47%,specificity was 97.96%,and sensitivity was 94.44%.In high-frequency ultrasound diagnosis,the proportion of grade III and IV blood flow in malignant nodules was higher than that in benign nodules,while the proportion of regular shape and clear margins was lower.The proportion of microcalcifications and posterior echo attenuation was higher in malignant nodules,and the resistance index(RI)and peak blood flow velocity were lower than those in benign nodules(P<0.05).Conclusion:High-frequency ultrasound can effectively differentiate benign and malignant breast micronodules,determine specific nodule types,and exhibits high diagnostic accuracy and sensitivity.Additionally,benign and malignant nodules can be differentiated based on the grading of blood flow signals,sonographic features,and blood flow velocity,providing reasonable guidance for subsequent treatment plans.
文摘China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and discontinuous,and there is no definite geological law to follow,which seriously threatens the safety of coal mine production and personnel life.Conventional ground geophysical methods have low accuracy in detecting goaf areas affected by mechanical interference from open-pit mines,especially for waterless goaf areas,which cannot be detected by existing methods.This article proposes the use of high-frequency electromagnetic waves for goaf detection.The feasibility of using drilling radar to detect goaf was theoretically analyzed,and a goaf detection model was established.The response characteristics of different fillers in the goaf under different frequencies of high-frequency electromagnetic waves were simulated and analyzed.In a certain open-pit mine in Inner Mongolia,100MHz high-frequency electromagnetic waves were used to detect the goaf through directional drilling on the ground.After detection,excavation verification was carried out,and the location of one goaf detected was verified.The results of engineering practice show that the application of high-frequency electromagnetic waves in goaf detection expands the detection radius of boreholes,has the advantages of high efficiency and accuracy,and has important theoretical and practical significance.
基金supported by the science and technology project of State Grid Shanghai Municipal Electric Power Company(No.52094023003L).
文摘New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.
文摘Objective:To analyze the therapeutic effect of high-frequency electrosurgical knife surgery guided by painless digestive endoscopy(PDE)in elderly patients with gastrointestinal polyps(GP).Methods:A total of 100 elderly GP patients admitted between June 2021 and December 2022 were selected.Patients were randomly divided into two groups:the painless group(50 cases)underwent high-frequency electrosurgical knife surgery guided by PDE,while the conventional group(50 cases)underwent the same surgery guided by traditional digestive endoscopy(DE).The total treatment efficacy,perioperative indicators,gastrointestinal hormone levels,oxidative stress(OS)markers,and complication rates were compared between the two groups.Results:The total treatment efficacy in the painless group was higher than that in the conventional group,and perioperative indicators were superior in the painless group(P<0.05).One week after treatment,the gastrointestinal hormone levels and OS-related markers in the painless group were better than those in the conventional group(P<0.05).The complication rate in the painless group was lower than in the conventional group(P<0.05).Conclusion:High-frequency electrosurgical knife surgery guided by PDE improves the effectiveness of polyp removal in elderly GP patients and accelerates postoperative recovery.It also protects gastrointestinal function,reduces postoperative OS,and ensures higher surgical safety.
基金supported by the National Science Foundation of China(No.12127806,No.62175195 and No.12304382)the International Joint Research Laboratory for Micro/Nano Manufacturing and Measurement Technologies.
文摘Single-shot ultrafast compressed imaging(UCI)is an effective tool for studying ultrafast dynamics in physics,chemistry,or material science because of its excellent high frame rate and large frame number.However,the random code(Rcode)used in traditional UCI will lead to low-frequency noise covering high-frequency information due to its uneven sampling interval,which is a great challenge in the fidelity of large-frame reconstruction.Here,a high-frequency enhanced compressed active photography(H-CAP)is proposed.By uniformizing the sampling interval of R-code,H-CAP capture the ultrafast process with a random uniform sampling mode.This sampling mode makes the high-frequency sampling energy dominant,which greatly suppresses the low-frequency noise blurring caused by R-code and achieves high-frequency information of image enhanced.The superior dynamic performance and large-frame reconstruction ability of H-CAP are verified by imaging optical self-focusing effect and static object,respectively.We applied H-CAP to the spatial-temporal characterization of double-pulse induced silicon surface ablation dynamics,which is performed within 220 frames in a single-shot of 300 ps.H-CAP provides a high-fidelity imaging method for observing ultrafast unrepeatable dynamic processes with large frames.
基金supported by the National Key R&D Program of China(Grant No.2021YFB3501300)the 9th Research Institute of China Electronics Technology Group Corporation’s open projects(Grant No.2024SK-002-01)the Science and Technology Project of Gansu Province(Grant No.22YF7GA001).
文摘Soft magnetic composites made from metallic magnetic particles with an easy magnetization plane(referred to as easy-plane metallic soft magnetic composites(SMC))are considered ideal materials for the next generation of power electronic devices.This advantage is attributed to their ability to maintain high permeability at elevated frequencies.Despite these advantages,a definitive mathematical model that connects the high-frequency magnetic properties(e.g.,effective permeability)of easy-plane metallic SMCs to the intrinsic properties of the particles is still lacking.In this work,a theoretical calculation model for the effective permeability of easy-plane metallic SMCs was formulated.This model was derived from a skin effect-corrected Landau-Lifshitz-Gilbert(LLG)equation and integrated with effective medium theory incorporating inter-particle interaction.To validate the model,we prepared samples of easy-plane Y_(2)Co_(17)particle/PU SMCs with varying particle sizes and volume fractions.The experimental results showed a strong agreement with the calculated values.This research offers critical theoretical backing for the design and optimization of soft magnetic materials intended for high-frequency applications.
基金National Natural Science Foundation of China, grant number 52177074.
文摘With the evolution of DC distribution networks from traditional radial topologies to more complex multi-branch structures,the number of measurement points supporting synchronous communication remains relatively limited.This poses challenges for conventional fault distance estimation methods,which are often tailored to simple topologies and are thus difficult to apply to large-scale,multi-node DC networks.To address this,a fault distance estimation method based on sparse measurement of high-frequency electrical quantities is proposed in this paper.First,a preliminary fault line identification model based on compressed sensing is constructed to effectively narrow the fault search range and improve localization efficiency.Then,leveraging the high-frequency impedance characteristics and the voltage-current relationship of electrical quantities,a fault distance estimation approach based on high-frequency measurements from both ends of a line is designed.This enables accurate distance estimation even when the measurement devices are not directly placed at both ends of the faulted line,overcoming the dependence on specific sensor placement inherent in traditional methods.Finally,to further enhance accuracy,an optimization model based on minimizing the high-frequency voltage error at the fault point is introduced to reduce estimation error.Simulation results demonstrate that the proposed method achieves a fault distance estimation error of less than 1%under normal conditions,and maintains good performance even under adverse scenarios.
文摘Dissimilar AZ31B magnesium alloy and DC56D steel were welded via AA1060 aluminum alloy by magnetic pulse welding.The effects of primary and secondary welding processes on the welded interface were comparatively investigated.Macroscopic morphology,microstructure,and interfacial structure of the joints were analyzed using scanning electron microscope,energy dispersive spectrometer,and X-ray diffractometer(XRD).The results show that magnetic pulse welding of dissimilar Mg/Fe metals is achieved using an Al interlayer,which acts as a bridge for deformation and diffusion.Specifically,the AZ31B/AA1060 interface exhibits a typical wavy morphology,and a transition zone exists at the joint interface,which may result in an extremely complex microstructure.The microstructure of this transition zone differs from that of AZ31B magnesium and 1060 Al alloys,and it is identified as brittle intermetallic compounds(IMCs)Al_(3)Mg_(2) and Al_(12)Mg_(17).The transition zone is mainly distributed on the Al side,with the maximum thickness of Al-side transition layer reaching approximately 13.53μm.Incomplete melting layers with varying thicknesses are observed at the primary weld interface,while micron-sized hole defects appear in the transition zone of the secondary weld interface.The AA1060/DC56D interface is mainly straight,with only a small number of discontinuous transition zones distributed intermittently along the interface.These transition zones are characterized by the presence of the brittle IMC FeAl_(3),with a maximum thickness of about 4μm.
基金supported by the Project of the National Key Research and Development Program of China under Grant 2022YFB2404100。
文摘The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model for epoxy resin encapsulated nano HFTs, which aims to precisely predict the temperature distribution inside the transformer in combination with the finite element method(FEM). A magnetothermal bidirectional coupling 3DTN model is established by analyzing the thermal conduction between the core, windings, and epoxy resin, while also considering the convection and radiation heat transfer mechanisms on the surface of the epoxy resin. The model considers the impact of loss distribution in the core and windings on the temperature field and adopts a simplified 1/2 thermal network model to reduce computational complexity. Furthermore, the results of FEM are compared with experimental results to verify the accuracy of the 3DTN model in predicting the temperature rise of nano HFT. The results show that the 3DTN model reduces errors by an average of 5.25% over the traditional two-dimensional thermal network(2DTN) model, particularly for temperature distributions in the windings and core. This paper provides a temperature rise prediction method for the thermal design and offers a theoretical basis and engineering guidance for the optimization of their thermal management systems.
基金supported by the National Natural Science Foundation of China(No.52405394)the Natural Science Foundation of Shanghai(No.24ZR1436500)+2 种基金the Natural Science Foundation of Chongqing(No.CSTB2024NSCQMSX0677)the Science Innovation Foundation of Shanghai Academy of Spaceflight Technology(No.SAST2024-039)the Startup Fund for Young Faculty at SJTU(No.24X010502880).
文摘Magnesium-rare earth(Mg-RE)alloys are pivotal for lightweight applications in aerospace and advanced engineering due to their high specific strength.However,manufacturing large-scale complex components via monolithic casting is challenging owing to defects such as RE oxides and shrinkage porosity,making fusion welding essential for both defect repair and structural joining.This review comprehensively examines recent advances in fusion welding of Mg-RE alloys,with emphasis on the interplay between their unique physicochemical properties and welding metallurgy.Various fusion welding methods suitable for Mg-RE alloys are compared and analyzed.Detailed characterization of joint regions reveals how thermal gradients and cooling rates govern phase evolution,grain morphology,and defect formation.Moreover,welding parameters and heat treatment strategies are systematically discussed for the microstructural configuration,especially for the inherent conflicts between grain coarsening in fusion zone and eutectic dissolution in heat-affected zone.Future research directions are also outlined.By correlating Mg-RE alloy properties with fusion welding processes,this review provides practical insights for designing reliable welded structures in critical applications.
基金supported by the National Natural Science Foundation of China(grant nos.52275364 and 52025052)。
文摘The corrosion resistance of base metal,laser-arc hybrid welded AZ31B magnesium alloys with and without addition of carbon nanotubes(CNTs)was compared.The corrosion behaviors and the underlying improvement mechanism of CNTs were systematically investigated.The introduction of CNTs effectively refined the grains,weakened the texture and enhanced the microstructure homogeneity of the weld,which contributed to the enhancement of corrosion resistance.Specifically,the corrosion rates of hydrogen evolution and weight loss of weld decreased by>30%after the addition of CNTs,and the corrosion products were denser due to the formation of Al_(2)O_(3)passive film.The corrosion current density and polarization resistance of weld with addition of CNTs were 1.220μA/cm^(2)and 7155·cm^(2),respectively,in contrast to 2.480μA/cm^(2)and approximately 269.5·cm^(2)for the weld without CNTs.Besides,the content of precipitates in the weld increased from 0.60%to 1.76%after the addition of CNTs,which can release Al^(3+)ions,promoting the formation of a dense Al_(2)O_(3)film that serves to protect the metal matrix from further degradation.
基金funded on the one hand by Agence de l'Innovation de Défense(AID)grant reference number 2021650044on the other hand by Ecole Centrale de Nantes。
文摘Joining dissimilar materials encounters significant engineering challenges due to the contrast in material properties that makes conventional welding not feasible.Magnetic Pulse Welding(MPW)offers a solidstate joining technique that overcomes these issues by using impact to create strong bonds without melting the substrate materials.This study investigates the weldability of aluminum alloy Al-5754 with Al-7075 and MARS 380 steel,used in armouring solutions of defense systems,by the use of MPW.In this work,weldability windows are investigated by varying standoff distances between the coating material and its substrate(0.25-4.5 mm)and discharge energies(5-13 kJ)with both O-shape and U-shape inductors.Mechanical strength of the welded joints were assessed through single lap shear tests,identifying optimal welding parameters.Then,the velocity profiles of the flyer plates were measured using heterodyne velocimetry to understand the dynamics of the impact.Then,substructures assembled with the optimal welding conditions were subjected to ballistic testing using 7.62 mm×51 mm NATO and 9 mm×19 mm Parabellum munitions to evaluate the resilience of the welds under ballistic impact.The outcomes demonstrate that MPW effectively joins Al-5754 with both Al-7075 and MARS 380,producing robust welds capable of withstanding ballistic impacts under certain conditions.This research advances the application of MPW in lightweight ballistic protection of defense systems,contributing to the development of more resilient and lighter protective structures.
