A high-frequency analytical solution for scattering of Rayleigh waves by a shallow circular alluvial valley was derived using wave function expansion method, and the solution was utilized to analyze the effects of inc...A high-frequency analytical solution for scattering of Rayleigh waves by a shallow circular alluvial valley was derived using wave function expansion method, and the solution was utilized to analyze the effects of incident frequency, width of the valley, and depth of the valley, etc, on the wave scattering. Numerical results showed that, because of the alluvial valley, the distribution of surface displacement at the side where wave arrives becomes relatively complicated, but the displacement amplitude is not large; the distribution of the surface displacement at far side is relatively simple, but the displacement amplitude is relatively large, and in most cases the amplitude is larger than that at the alluvium.展开更多
Through the Fourier-Bessel series expansion of wave functions,the analytical solution to the two-dimensional scattering problem of incidental plane P waves by circular-arc canyon topography with different depth-to-wid...Through the Fourier-Bessel series expansion of wave functions,the analytical solution to the two-dimensional scattering problem of incidental plane P waves by circular-arc canyon topography with different depth-to-width ratio is deduced.Unlike other existing analytical solutions,in order to ensure that the analytical solution is valid for higher frequency incident waves,the asymptotic properties of cylindrical functions are in this paper introduced to directly determine the unknown coefficients of scattering waves,avoiding the solution of linear equation systems and corresponding numerical issues,which in turn expand the frequency band in which the analytical solution is valid.Comparison with other existing analytical solutions demonstrates that the proposed analytical solution is correct.Furthermore,the scattering effects of a circular-arc canyon on the incident plane P wave are analyzed in a comparatively broad frequency band.展开更多
In this study,FeCr_(x)MnAlCu(x=0,0.5,1.0,1.5,2.0)high-entropy alloys were fabricated using vacuum arc melting,and the corrosion behavior of these alloys in 3.5wt%NaCl solution at room temperature was investigated by e...In this study,FeCr_(x)MnAlCu(x=0,0.5,1.0,1.5,2.0)high-entropy alloys were fabricated using vacuum arc melting,and the corrosion behavior of these alloys in 3.5wt%NaCl solution at room temperature was investigated by electrochemical dynamic potential polarization curves and immersion experiments.The microstructure results show that the high-entropy alloy with x=0 has a body-centered cubic phase structure,whereas the high-entropy alloys with x=0.5–2.0 have a mixed face-centered cubic+body-centered cubic dual-phase structure.The corrosion results show that the corrosion resistance of the high-entropy alloy is increased with the increase in Cr content.Among them,the high-entropy alloy with x=2.0 exhibits the optimal corrosion resistance:the highest self-corrosion potential(E_(corr)=−0.354 V vs.Ag/AgCl),the smallest self-corrosion current density(I_(corr)=1.991×10^(−6)A·cm^(−2)),and the smallest corrosion rate(0.0292 mm/a).The composite passivation film of oxides and hydroxides is formed on the surface of the corroded high-entropy alloys,and the Cr_(2)O_(3)content is increased with the increase in Cr content,which effectively improves the stability and protective properties of the passivation film.展开更多
In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar perce...In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.展开更多
To investigate the effect of solution treatment and aging process parameters on the microstructure and mechanical properties of TB18 titanium alloy,process optimization research was conducted based on the mixed-level ...To investigate the effect of solution treatment and aging process parameters on the microstructure and mechanical properties of TB18 titanium alloy,process optimization research was conducted based on the mixed-level orthogonal experiment design of factor levels.Results show that through range analysis,the significance order of process parameters is determined as follows:solution cooling method>solution temperature>aging time>aging temperature>solution time.Considering the strength-ductility matching and engineering application requirements,the benchmark parameters are selected as solution time of 1 h,solution cooling method of air cooling(AC),aging temperature of 525℃,and aging time of 4 h.Furthermore,the effects of solution temperature in the range of 790–870℃ on the impact toughness and micro-fracture characteristics of the alloy were studied.The results reveal that the larger the area of shear lip and fibrous zone,and the smaller the area of radiation zone,the better the toughness of the alloy.With the increase in solution temperature,the length of secondary cracks on the fracture surface increases,the number of dimples increases,and the toughness is enhanced.Based on the collaborative optimization of strength and toughness,the optimal heat treatment process for TB18 alloy is determined as 870℃/1 h,AC+525℃/4 h,AC.展开更多
In this paper,we consider a Schr¨odinger-Poisson system with sublinear nonlinearity.The growth of nonlinearity depends on potential function and a bounded function.We first obtain the existence of nontrivial solu...In this paper,we consider a Schr¨odinger-Poisson system with sublinear nonlinearity.The growth of nonlinearity depends on potential function and a bounded function.We first obtain the existence of nontrivial solution sequence with negative energy for the system via a variant Clark’s theorem.Then we get the asymptotical property of the solution sequence by L∞norm.展开更多
This study investigates the dimensionless quasi-geostrophic potential vorticity(QG-PV)equation with external sources.Employing the Gardner-Morikawa transformation and weakly nonlinear perturbation expansion,we derive ...This study investigates the dimensionless quasi-geostrophic potential vorticity(QG-PV)equation with external sources.Employing the Gardner-Morikawa transformation and weakly nonlinear perturbation expansion,we derive the nonlinear Boussinesq equation with external sources.We demonstrate the existence of explicit zero-order and first-order Wronskian solutions for the model equation whenα_4=0.Furthermore,using a modified Jacobi elliptic function method,we obtain soliton-like solutions for bothα_4=0 andα_4≠0.Analysis of these solutions reveals that the generalizedβ-plane approximation and shear flow are significant factors in inducing nonlinear Rossby waves,and that external sources play a crucial role in influencing Rossby wave behavior.展开更多
There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution...There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.展开更多
Water storage in the Three Gorges Reservoir in China has increased the regional microseismicity.Bedding-rock landslides,one of the most common slope structures in the Three Gorges Reservoir,are highly prone to sliding...Water storage in the Three Gorges Reservoir in China has increased the regional microseismicity.Bedding-rock landslides,one of the most common slope structures in the Three Gorges Reservoir,are highly prone to sliding under seismic loading.Existing research primarily focuses on the stability of bedding rock landslides under strong earthquakes,while studies on the cumulative damage and long-term stability of bedding rock landslides under high-frequency microseismicity remain immature.In this study,we considered bedding rock landslides under high-frequency microseismicity in the Three Gorges Reservoir area as the research subject and equivalent microseismicity as pre-peak cyclic loading.First,we analyzed the shear strength deterioration of rock mass structural planes under pre-peak cyclic loading conditions and found that the deformation and failure of structural planes involve contact and damage effects.The shear strength of the rock mass structural planes under pre-peak cyclic loading conditions is affected by the confining pressure,loading rate,loading amplitude,and number of loading cycles.Among these factors,the shear strength of the structural planes was the most sensitive to the number of loading cycles.As the number of cycles increased,the rock mass structural planes underwent three stages:stress adjustment(increase in shear strength),fatigue damage(gradual decrease in shear strength),and structural failure(rapid decrease in shear strength).The stability of bedding rock landslides under high-frequency microseismicity was analyzed,revealing that the stability of bedding rock landslides under high-frequency microseismicity can be divided into three stages:short-term enhancement,gradual degradation,and rapid deterioration,exhibiting characteristics of gradual and sudden changes.展开更多
Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicate...Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.展开更多
Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challeng...Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.展开更多
ZnO thin-film transistors(TFTs)with channel layers fabricated by spin-coating are demonstrated.A nano ZnO colloidal aqueous solution with zinc nitrate dissolved in it was first deposited on the ATO/ITO/glass substrate...ZnO thin-film transistors(TFTs)with channel layers fabricated by spin-coating are demonstrated.A nano ZnO colloidal aqueous solution with zinc nitrate dissolved in it was first deposited on the ATO/ITO/glass substrate by spin-coating process.The thin-film transistor with well-controlled and densely packed ZnO crystalline layer was obtained by thermal annealing the system of colloidal solution film coated ATO/ITO/glass substrate.By optimizing the fabrication conditions,the fabricated thin-film transistors exhibited superior field-effect properties,which were stable,highly transparent,n-channel and enhancement-mode with a channel mobility as large as 3.02 cm^(2)·V^(-1).s^(-1).Our method of fabricating ZnO thin-film transistors was simple,high efficiency,and feasible for the batch production with low cost.展开更多
In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoret...In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoretical principle of heterodyne LITES(H-LITES)signal generation is analyzed firstly,and an acetylene(C_(2)H_(2))H-LITES sensor is established to verify its performance.Experimental comparisons between the high-frequency QTF and a standard commercial QTF with resonant frequency of~32.768 kHz reveal that the high-frequency QTF exhibits a tenfold faster response time.Specifically,the H-LITES sensor with this QTF achieves a 33 ms measurement cycle,90%shorter than commercial counterparts.Furthermore,The SH-LITES technique is proposed to further shorten the scanning time to 15 ms,which achieves the shortest LITES measurement time known to date.To demonstrate its advantages in dynamic gas detection,an H_(2)O-LITES system integrating both QTF types is constructed for real-time monitoring of H_(2)O concentration during different respiration patterns.Comparative measurements show that the SH-LITES more accurately captures dynamic H_(2)O concentration fluctuations during respiration,outperforming the commercial QTF-based H-LITES sensor in rapid response scenarios.展开更多
This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic fie...This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.展开更多
In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→...In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.展开更多
Composite resin restorations are routinely exposed to acidic and chromogenic beverages that may alter their surface integrity over time.This in-vitro study evaluated the surface roughness behavior of two universal sin...Composite resin restorations are routinely exposed to acidic and chromogenic beverages that may alter their surface integrity over time.This in-vitro study evaluated the surface roughness behavior of two universal single-shade(Unishade)composites and two conventionalmulti-shade composites following immersion in commonly consumed staining solutions and assessed whether repolishing could restore smoothness after degradation.A total of 120 standardized disc specimens were fabricated and allocated to fourmaterial groups,with each group subdivided into distilled water,cola,and coffee immersion subgroups.Surface roughness was recorded at baseline,after one week,after one month,and following a final repolishing step using a standardized multi-step system.The findings demonstrated that Unishade composites exhibited more stable surface characteristics across all immersion periods,with changes consistently remaining below the threshold associated with biofilm accumulation.Conventional composites showed greater variability,particularly in cola,where roughness values increased significantly compared with distilled water and coffee.Repolishing substantially reduced immersion-induced roughness in all materials,although its effectiveness varied depending on composite formulation and beverage acidity.Cola produced the greatest surface alterations across all groups,highlighting the erosive potential of low-pH beverages.These results indicate that Unishade composites possess superior resistance to surface degradation,likely due to their nano-structured filler configuration and less hydrophilic resin matrices,while conventional materials appear more susceptible to acidic challenge.Within the limitations of this study,selecting surface-stable material types and applying appropriate finishing and repolishing protocols may enhance the long-term performance and esthetics of composite restorations.展开更多
The use of Al-V alloys as intermediate additives is pivotal for producing high-performance Ti alloys.Traditionally,the synthesis of these alloys relies on high-purity V_(2)O_(5),with sodium metavanadate as an essentia...The use of Al-V alloys as intermediate additives is pivotal for producing high-performance Ti alloys.Traditionally,the synthesis of these alloys relies on high-purity V_(2)O_(5),with sodium metavanadate as an essential intermediate in V_(2)O_(5)production.This study explores an alternative approach utilizing sodium metavanadate directly,offering an aluminothermic process to alleviate the environmental impact and reduce the time required for V_(2)O_(5)preparation.Al-V alloys are synthesized using sodium metavanadate derived from a shale V-rich solution,and the impurity-migration behaviors are comprehensively analyzed,specifically focusing on Fe,Al,and Na.The result sreveal that Al interacts with CaO to form a slag phase that is different from the alloy,whereas Na undergoes a sequence of reductions (NaVO_(3)→Na_(2)V_(2)O_(5)→NaVO_(2)→Na)and volatilizes at 25-1200℃,thereby avoiding incorporation into the alloy.Fe,reduced by Al,enriches the alloy phase and induces a phase transition(Al-V→Al-Fe→Fe-V)in the presence of excess Fe.Sodium metavanadate(Fe≤0.05wt%)derived from the shale V-rich solution enables the production of a uniform AlV65 alloy with 66.56wt%V,33.14wt%Al,0.08wt%Fe,0.07wt%C,0.02wt%N,and 0.12wt%O.These results establish a streamlined,efficient framework for the future preparation of Al-V alloys from shale V-rich solutions.展开更多
Community-pioneered Nature-based Solutions(NbS)have become the main strategies in climate adaptation,although the evidence of their effectiveness and the governing conditions is still fragmented across hazards,ecosyst...Community-pioneered Nature-based Solutions(NbS)have become the main strategies in climate adaptation,although the evidence of their effectiveness and the governing conditions is still fragmented across hazards,ecosystems,and disciplines.The current review is a synthesis of the worldwide empirical research based on the concept of community-led NbS,meaning those interventions where communities have significant decision-making power and responsibility concerning the design,stewardship,sharing of benefits,and learning.On a taxonomy that differentiates between proximal ecosystem functionality and hazard modulation and distal human vulnerability reduction,and procedural,distributional,and recognition justice,we systematize the evidence-based findings according to hazardecosystem-intervention type(coastal storms and sea-level rise,flooding,drought and water insecurity,urban heat,and emerging compound risks)and we compare the outcomes.The results are reported to have the co-benefits of biodiversity gain,livelihood diversification,and better well-being,though they can be neutralized by elite capture,exclusion,tenure insecurity,as well as,in cities,green gentrification and displacement.The analysis of governance indicates repeating bundles related to longer-lasting and fairer results:hedge rights and tenure,community-enforceable and legitimizing representation institutions,financing institutions with longer horizons of maintenance and active adaptation,protection,and grievance,ethical supervision,and data governance.Our findings conclude that to scale community-led NbS,we need to switch the targets of areas to the target of governance quality and design of evaluation that would connect a change in the ecosystem to lived risk reduction and distributional change.展开更多
Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar...Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.展开更多
基金National Natural Science Foundation of China (50378063) and the Program for New Century Excellent Talents in University
文摘A high-frequency analytical solution for scattering of Rayleigh waves by a shallow circular alluvial valley was derived using wave function expansion method, and the solution was utilized to analyze the effects of incident frequency, width of the valley, and depth of the valley, etc, on the wave scattering. Numerical results showed that, because of the alluvial valley, the distribution of surface displacement at the side where wave arrives becomes relatively complicated, but the displacement amplitude is not large; the distribution of the surface displacement at far side is relatively simple, but the displacement amplitude is relatively large, and in most cases the amplitude is larger than that at the alluvium.
基金sponsored by the National Key Technology R&D Program (Grant No. 2006BAC13B02)the National Natural Science Foundation (Grant No.50608066)the Joint Earthquake Science Foundaton (Grant No. A07045),China
文摘Through the Fourier-Bessel series expansion of wave functions,the analytical solution to the two-dimensional scattering problem of incidental plane P waves by circular-arc canyon topography with different depth-to-width ratio is deduced.Unlike other existing analytical solutions,in order to ensure that the analytical solution is valid for higher frequency incident waves,the asymptotic properties of cylindrical functions are in this paper introduced to directly determine the unknown coefficients of scattering waves,avoiding the solution of linear equation systems and corresponding numerical issues,which in turn expand the frequency band in which the analytical solution is valid.Comparison with other existing analytical solutions demonstrates that the proposed analytical solution is correct.Furthermore,the scattering effects of a circular-arc canyon on the incident plane P wave are analyzed in a comparatively broad frequency band.
基金Gansu Provincial Science and Technology Major Special Program(24ZDWA008)Fourth Batch of Top Leading Talents Fund Projects in Gansu Province(ZZ2023G50100013)。
文摘In this study,FeCr_(x)MnAlCu(x=0,0.5,1.0,1.5,2.0)high-entropy alloys were fabricated using vacuum arc melting,and the corrosion behavior of these alloys in 3.5wt%NaCl solution at room temperature was investigated by electrochemical dynamic potential polarization curves and immersion experiments.The microstructure results show that the high-entropy alloy with x=0 has a body-centered cubic phase structure,whereas the high-entropy alloys with x=0.5–2.0 have a mixed face-centered cubic+body-centered cubic dual-phase structure.The corrosion results show that the corrosion resistance of the high-entropy alloy is increased with the increase in Cr content.Among them,the high-entropy alloy with x=2.0 exhibits the optimal corrosion resistance:the highest self-corrosion potential(E_(corr)=−0.354 V vs.Ag/AgCl),the smallest self-corrosion current density(I_(corr)=1.991×10^(−6)A·cm^(−2)),and the smallest corrosion rate(0.0292 mm/a).The composite passivation film of oxides and hydroxides is formed on the surface of the corroded high-entropy alloys,and the Cr_(2)O_(3)content is increased with the increase in Cr content,which effectively improves the stability and protective properties of the passivation film.
基金Supported by the Doctoral Research Start-up Project of Yuncheng University(YQ-2023067)Project of Shanxi Natural Science Foundation(202303021211189)+1 种基金Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shanxi Provinces(20220036)Shanxi ProvinceIntelligent Optoelectronic Sensing Application Technology Innovation Center and Shanxi Province Optoelectronic Information Science and TechnologyLaboratory,Yuncheng University.
文摘In this study,a straightforward one-step hydrothermal method was successfully utilized to synthesize the solid solution Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)-Na_(2)Ni_(2)Ti_(6)O_(16)(NNMTO-x),where x denotes the molar percentage of Na_(2)Ni_(2)Ti_(6)O_(16)(NNTO)within Na_(0.9)Mg_(0.45)Ti_(3.55)O_(8)(NMTO),with x values of 10,20,30,40,and 50.Both XPS(X-ray Photoelectron Spectroscopy)and EDX(Energy Dispersive X-ray Spectroscopy)analyses unequivocally validated the formation of the NNMTO-x solid solutions.It was observed that when x is below 40,the NNMTO-x solid solution retains the structural characteristics of the original NMTO.However,beyond this threshold,significant alterations in crystal morphology were noted,accompanied by a noticeable decline in photocatalytic activity.Notably,the absorption edge of NNMTO-x(x<40)exhibited a shift towards the visible-light spectrum,thereby substantially broadening the absorption range.The findings highlight that NNMTO-30 possesses the most pronounced photocatalytic activity for the reduction of CO_(2).Specifically,after a 6 h irradiation period,the production rates of CO and CH_(4)were recorded at 42.38 and 1.47μmol/g,respectively.This investigation provides pivotal insights that are instrumental in the advancement of highly efficient and stable photocatalysts tailored for CO_(2)reduction processes.
基金Key Program of National Natural Science Foundation of China(52431001)。
文摘To investigate the effect of solution treatment and aging process parameters on the microstructure and mechanical properties of TB18 titanium alloy,process optimization research was conducted based on the mixed-level orthogonal experiment design of factor levels.Results show that through range analysis,the significance order of process parameters is determined as follows:solution cooling method>solution temperature>aging time>aging temperature>solution time.Considering the strength-ductility matching and engineering application requirements,the benchmark parameters are selected as solution time of 1 h,solution cooling method of air cooling(AC),aging temperature of 525℃,and aging time of 4 h.Furthermore,the effects of solution temperature in the range of 790–870℃ on the impact toughness and micro-fracture characteristics of the alloy were studied.The results reveal that the larger the area of shear lip and fibrous zone,and the smaller the area of radiation zone,the better the toughness of the alloy.With the increase in solution temperature,the length of secondary cracks on the fracture surface increases,the number of dimples increases,and the toughness is enhanced.Based on the collaborative optimization of strength and toughness,the optimal heat treatment process for TB18 alloy is determined as 870℃/1 h,AC+525℃/4 h,AC.
基金Supported by the National Natural Science Foundation of China(12226412)Natural Science Foundation of Jiangsu Province(BK20221339)。
文摘In this paper,we consider a Schr¨odinger-Poisson system with sublinear nonlinearity.The growth of nonlinearity depends on potential function and a bounded function.We first obtain the existence of nontrivial solution sequence with negative energy for the system via a variant Clark’s theorem.Then we get the asymptotical property of the solution sequence by L∞norm.
基金supported by the National Natural Science Foundation of China(Grant No.12362027)the Scientific Research Ability of Youth Teachers of Inner Mongolia Agricultural University(Grant No.BR230110)+3 种基金Inner Mongolia National Science Fund for Excellent Young Scholars(Grant No.2025YQ033)Foundation for Basic Science Research Initiation at Inner Mongolia Agricultural University(Grant No.JC2021001)The Natural Science Foundation of Inner Mongolia Autonomous Region(2025MS01020)Supported by the Basic and Applied Basic Research Science and Technology Program Projects of Hohhot(2025-rule-basic-60)。
文摘This study investigates the dimensionless quasi-geostrophic potential vorticity(QG-PV)equation with external sources.Employing the Gardner-Morikawa transformation and weakly nonlinear perturbation expansion,we derive the nonlinear Boussinesq equation with external sources.We demonstrate the existence of explicit zero-order and first-order Wronskian solutions for the model equation whenα_4=0.Furthermore,using a modified Jacobi elliptic function method,we obtain soliton-like solutions for bothα_4=0 andα_4≠0.Analysis of these solutions reveals that the generalizedβ-plane approximation and shear flow are significant factors in inducing nonlinear Rossby waves,and that external sources play a crucial role in influencing Rossby wave behavior.
基金supported by the National Nature Science Foundation of China(Nos.12027901 and 12041202)Synchrotron Radiation Joint Fund of University of Science and Technology of China(Nos.KY2090000059 and KY2090000054)。
文摘There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.
基金sponsored by the General Program of the National Natural Science Foundation of China(Grant No.42407221)the Open Fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Grant No.SKLGP2024K009)the Hubei Provincial Natural Science Foun-dation,China(Grant No.2023AFB567).
文摘Water storage in the Three Gorges Reservoir in China has increased the regional microseismicity.Bedding-rock landslides,one of the most common slope structures in the Three Gorges Reservoir,are highly prone to sliding under seismic loading.Existing research primarily focuses on the stability of bedding rock landslides under strong earthquakes,while studies on the cumulative damage and long-term stability of bedding rock landslides under high-frequency microseismicity remain immature.In this study,we considered bedding rock landslides under high-frequency microseismicity in the Three Gorges Reservoir area as the research subject and equivalent microseismicity as pre-peak cyclic loading.First,we analyzed the shear strength deterioration of rock mass structural planes under pre-peak cyclic loading conditions and found that the deformation and failure of structural planes involve contact and damage effects.The shear strength of the rock mass structural planes under pre-peak cyclic loading conditions is affected by the confining pressure,loading rate,loading amplitude,and number of loading cycles.Among these factors,the shear strength of the structural planes was the most sensitive to the number of loading cycles.As the number of cycles increased,the rock mass structural planes underwent three stages:stress adjustment(increase in shear strength),fatigue damage(gradual decrease in shear strength),and structural failure(rapid decrease in shear strength).The stability of bedding rock landslides under high-frequency microseismicity was analyzed,revealing that the stability of bedding rock landslides under high-frequency microseismicity can be divided into three stages:short-term enhancement,gradual degradation,and rapid deterioration,exhibiting characteristics of gradual and sudden changes.
基金Project supported by the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Science and ICT(No.RS-2024-00337001)。
文摘Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.
基金Supported by National Natural Science Foundation of China(Grant No.62173161).
文摘Let A be a 3×3 singular or diagonalizable matrix,all solutions to the Yang-Baxter-like matrix equation have been determined.However,finding all solutions for full rank,non-diagonalizable matrices remains challenging.By utilizing classification techniques,we establish all solutions of the Yang-Baxter-like matrix equation in this paper when the coefficient matrix A is similar to non-diagonalizable matrix diag(λ,J_(2)(λ))withλ̸=0.More specifically,we divide the non-diagonal elements of the solution into 10 different cases.By discussing each situation,we establish all solutions of the Yang-Baxter-like matrix equation.The results of this work enrich the existing ones.
文摘ZnO thin-film transistors(TFTs)with channel layers fabricated by spin-coating are demonstrated.A nano ZnO colloidal aqueous solution with zinc nitrate dissolved in it was first deposited on the ATO/ITO/glass substrate by spin-coating process.The thin-film transistor with well-controlled and densely packed ZnO crystalline layer was obtained by thermal annealing the system of colloidal solution film coated ATO/ITO/glass substrate.By optimizing the fabrication conditions,the fabricated thin-film transistors exhibited superior field-effect properties,which were stable,highly transparent,n-channel and enhancement-mode with a channel mobility as large as 3.02 cm^(2)·V^(-1).s^(-1).Our method of fabricating ZnO thin-film transistors was simple,high efficiency,and feasible for the batch production with low cost.
基金financial supports from the National Natural Science Foundation of China(Grant No.62335006,62275065,624B2050,62022032,and 62405078)Open Subject of Hebei Key Laboratory of Advanced Laser Technology and Equipment(HBKL-ALTE2025001)+2 种基金Heilongjiang Postdoctoral Fund(Grant No.LBH-Z23144 and LBH-Z24155)Natural Science Foundation of Heilongjiang Province(Grant No.LH2024F031)China Postdoctoral Science Foundation(Grant No.2024M764172).
文摘In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoretical principle of heterodyne LITES(H-LITES)signal generation is analyzed firstly,and an acetylene(C_(2)H_(2))H-LITES sensor is established to verify its performance.Experimental comparisons between the high-frequency QTF and a standard commercial QTF with resonant frequency of~32.768 kHz reveal that the high-frequency QTF exhibits a tenfold faster response time.Specifically,the H-LITES sensor with this QTF achieves a 33 ms measurement cycle,90%shorter than commercial counterparts.Furthermore,The SH-LITES technique is proposed to further shorten the scanning time to 15 ms,which achieves the shortest LITES measurement time known to date.To demonstrate its advantages in dynamic gas detection,an H_(2)O-LITES system integrating both QTF types is constructed for real-time monitoring of H_(2)O concentration during different respiration patterns.Comparative measurements show that the SH-LITES more accurately captures dynamic H_(2)O concentration fluctuations during respiration,outperforming the commercial QTF-based H-LITES sensor in rapid response scenarios.
基金supported by the National Natural Science Foundation of China(12401279,12371219)the Academic and Technical Leaders Training Plan of Jiangxi Province(20212BCJ23027).
文摘This paper is concerned with an initial boundary value problem for the planar magnetohydrodynamic compressible flow with temperature dependent heat conductivity in a half-line.In particular,the transverse magnetic field is assumed to satisfy the Neumann boundary condition,which was first investigated by Kazhikhov in 1987.We establish the global existence of the unique strong solutions to the MHD equations without any smallness conditions on the initial data.More precisely,our result can be regarded as a natural generalization of Kazhikov’s result for applying the constant heat-conductivity in bounded domains to the degenerate case in unbounded domains.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12361040,12061064)the National Science Foundation of Gansu Province(Grant No.22JR5RA264)State Scholarship Fund(Grant No.20230862021).
文摘In this article,we show the existence,uniqueness and stability of bounded solutions to the following quasilinear problems with mean curvature operator(φ'(x′(t)))′=f(t,x),t≥t_(0),lim_(t→∞)x(t)=ψ_(0),lim_(t→∞)x′(t)e^(t)=0,where t_(0) and ψ_(0) are real constants,φ(s)=s/√1−s^(2),s∈R with s∈(−1,1),f:[t_(0),∞)×R→R satisfies the Lipschitz or Osgood-type conditions.
文摘Composite resin restorations are routinely exposed to acidic and chromogenic beverages that may alter their surface integrity over time.This in-vitro study evaluated the surface roughness behavior of two universal single-shade(Unishade)composites and two conventionalmulti-shade composites following immersion in commonly consumed staining solutions and assessed whether repolishing could restore smoothness after degradation.A total of 120 standardized disc specimens were fabricated and allocated to fourmaterial groups,with each group subdivided into distilled water,cola,and coffee immersion subgroups.Surface roughness was recorded at baseline,after one week,after one month,and following a final repolishing step using a standardized multi-step system.The findings demonstrated that Unishade composites exhibited more stable surface characteristics across all immersion periods,with changes consistently remaining below the threshold associated with biofilm accumulation.Conventional composites showed greater variability,particularly in cola,where roughness values increased significantly compared with distilled water and coffee.Repolishing substantially reduced immersion-induced roughness in all materials,although its effectiveness varied depending on composite formulation and beverage acidity.Cola produced the greatest surface alterations across all groups,highlighting the erosive potential of low-pH beverages.These results indicate that Unishade composites possess superior resistance to surface degradation,likely due to their nano-structured filler configuration and less hydrophilic resin matrices,while conventional materials appear more susceptible to acidic challenge.Within the limitations of this study,selecting surface-stable material types and applying appropriate finishing and repolishing protocols may enhance the long-term performance and esthetics of composite restorations.
基金funded by the National Key R&D Pro-gram of China (No.2023YFC3903903)the Science and Technology Innovation Talent Program of Hubei Province,China (No.2022EJD002).
文摘The use of Al-V alloys as intermediate additives is pivotal for producing high-performance Ti alloys.Traditionally,the synthesis of these alloys relies on high-purity V_(2)O_(5),with sodium metavanadate as an essential intermediate in V_(2)O_(5)production.This study explores an alternative approach utilizing sodium metavanadate directly,offering an aluminothermic process to alleviate the environmental impact and reduce the time required for V_(2)O_(5)preparation.Al-V alloys are synthesized using sodium metavanadate derived from a shale V-rich solution,and the impurity-migration behaviors are comprehensively analyzed,specifically focusing on Fe,Al,and Na.The result sreveal that Al interacts with CaO to form a slag phase that is different from the alloy,whereas Na undergoes a sequence of reductions (NaVO_(3)→Na_(2)V_(2)O_(5)→NaVO_(2)→Na)and volatilizes at 25-1200℃,thereby avoiding incorporation into the alloy.Fe,reduced by Al,enriches the alloy phase and induces a phase transition(Al-V→Al-Fe→Fe-V)in the presence of excess Fe.Sodium metavanadate(Fe≤0.05wt%)derived from the shale V-rich solution enables the production of a uniform AlV65 alloy with 66.56wt%V,33.14wt%Al,0.08wt%Fe,0.07wt%C,0.02wt%N,and 0.12wt%O.These results establish a streamlined,efficient framework for the future preparation of Al-V alloys from shale V-rich solutions.
文摘Community-pioneered Nature-based Solutions(NbS)have become the main strategies in climate adaptation,although the evidence of their effectiveness and the governing conditions is still fragmented across hazards,ecosystems,and disciplines.The current review is a synthesis of the worldwide empirical research based on the concept of community-led NbS,meaning those interventions where communities have significant decision-making power and responsibility concerning the design,stewardship,sharing of benefits,and learning.On a taxonomy that differentiates between proximal ecosystem functionality and hazard modulation and distal human vulnerability reduction,and procedural,distributional,and recognition justice,we systematize the evidence-based findings according to hazardecosystem-intervention type(coastal storms and sea-level rise,flooding,drought and water insecurity,urban heat,and emerging compound risks)and we compare the outcomes.The results are reported to have the co-benefits of biodiversity gain,livelihood diversification,and better well-being,though they can be neutralized by elite capture,exclusion,tenure insecurity,as well as,in cities,green gentrification and displacement.The analysis of governance indicates repeating bundles related to longer-lasting and fairer results:hedge rights and tenure,community-enforceable and legitimizing representation institutions,financing institutions with longer horizons of maintenance and active adaptation,protection,and grievance,ethical supervision,and data governance.Our findings conclude that to scale community-led NbS,we need to switch the targets of areas to the target of governance quality and design of evaluation that would connect a change in the ecosystem to lived risk reduction and distributional change.
文摘Circumlunar abort trajectories constitute a vital contingency return strategy during the translunar phase of crewed lunar missions.This paper proposes a methodology for constructing the solution set of the circumlunar abort trajectory and leverages its advantageous properties to address the optimization design problem of abort trajectories.Initially,a solution set of all feasible abort trajectories,originating from an abort point on the nominal trajectory and complying with fundamental reentry constraints,is formulated through the introduction of two novel design parameters.Subsequently,the geometric characteristics of the solution set,as well as the distributional properties of key iterative constraint responses,including flight time and velocity increment,are analyzed.Finally,the characteristics exhibited in the solution set are employed to directly identify the design parameters of the abort trajectories with minimum flight time and velocity increment,thereby providing solutions to two distinct types of optimization problems.The simulation results for a variety of nominal trajectories,encompassing the reconstruction and redesign of the Apollo13 abort trajectory,validate the proposed method,demonstrating its ability to directly generate optimal abort trajectories.The method proposed in this paper investigates feasible abort trajectories from a global perspective,providing both a framework and convenience for mission planning and iterative optimization in abort trajectory design.
