Stress waves propagate along vertical,radial and circumferential directions when a non-uniformly distributed load is applied at one end of a three-dimensional shaft.As a result,the receiving signals are usually mixed ...Stress waves propagate along vertical,radial and circumferential directions when a non-uniformly distributed load is applied at one end of a three-dimensional shaft.As a result,the receiving signals are usually mixed with undesired interference components,often featuring as high-frequency fluctuations.Previous studies have revealed that sectional geometry(shape and size)greatly affects the high-frequency interference.In this study,low strain dynamic testing on full-scale X-section concrete is conducted in order to investigate the influences of high-frequency interference on velocity responses at the pile head.Emphasis is placed on the frequency and peak value of interference waves at various receiving points.Additionally,the effects of the geometrical,and mechanical properties of the pile shaft on high-frequency interference are elaborated on through the three-dimensional finite element method.The results show that the measured wave is obscured by interference waves superposed by two types of high-frequency components.The modulus and cross-sectional area are contributing factors to the frequency and peak value of the interference waves.On the other hand,the position with the least interference is determined,to some extent,by the accurate shape of the X-section.展开更多
New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed s...New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.展开更多
The high-frequency interference exists obviously in low strain integrity testing of large-diameter pipe pile when a transientpoint load is applied. An analytical solution of vertical vibratory response of large-diamet...The high-frequency interference exists obviously in low strain integrity testing of large-diameter pipe pile when a transientpoint load is applied. An analytical solution of vertical vibratory response of large-diameter pipe piles in low strain testing isdeduced in this paper. The analytical solution is verified by both numerical simulation and model test results. The time-domainvelocity responses on pile top are analyzed. The calculation results indicate that the time-domain responses at various pointssuffer different high-frequency interferences, thus the peak values and phases of different points are different. The influence ofvibratory modes on high-frequency interference is analyzed. It is found that the high-frequency interference at 90° point main-ly derives from the second flexural mode, but for other points it mainly originates from the first flexural mode. The factors af-fecting the frequency and peak value of interference waves have been investigated in this study. The results indicate that thelarger radius angle between the receiving and 90° points leads to greater peak value of high frequency wave crest. The leasthigh-frequency interference is detected at the angle of 90°. The frequency of interference waves is decreased with the increaseof pile radius, while the peak value is almost constant. The frequency is also related to pile modulus, i.e. the larger pile modu-lus results in greater frequency. The peak value varies with impulse width and soil resistance, i.e., the wider impulse width andlarger soil resistance cause smaller peak value. In conclusion, the frequency of interference waves is dependent on the geomet-rical and mechanics characteristics of the piles such as pile radius and modulus, but independent of the external conditionssuch as impulse width and soil resistance. On the other hand, the peak value of interference waves is mainly dependent on theexternal conditions but independent of the geometrical and mechanics characteristics of the piles. In practice, some externalmeasures should be adopted to weaken high-frequency interference such as using soft hammer, hammer cushion and adoptingsuitable receiving point.展开更多
Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteri...Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteristics and flow field evolution laws of overlapping rotor configurations in hovering conditions through numerical simulation methods.The research method involves constructing a computational model for rotor flow fields and aerodynamic characteristics based on the Reynolds-averaged Navier-Stokes(RANS)equations and the Spalart-Allmaras(S-A)turbulence model.The dynamic simulation of rotor rotational motion was achieved by using the moving nested grid technology.The reliability of the computational method was ensured through the grid independence verification and the comparison with experimental data.The research results indicate that in overlapping rotor systems,rotorⅡexperiences a decrease in thrust,significant power fluctuations,and reduced hovering efficiency due to continuous interference from the adjacent rotor’s wake and blade-vortex interactions.Blade-tip vortices undergo breakage,fusion,and secondary rolling in the overlapping region,forming large-scale turbulent structures that lead to attenuation of the induced velocity field and aerodynamic efficiency losses.Additionally,the interaction between the rotor downwash and the fuselage triggers a“fountain effect”and a sudden increase in surface pressure on the fuselage,exacerbating flow field distortion.Based on the aforementioned mechanisms,the safe flight of overlapping rotor configurations can be achieved by optimizing the configuration strategy of the rotational speed phase difference between adjacent blades.This study provides a theoretical basis for the rotor layout design and the aerodynamic performance enhancement of heavy-load eVTOL aircraft.展开更多
There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution...There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.展开更多
The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement...The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement of simultaneous high efficiency and low reflectivity across microwave,terahertz,and infrared spectra remains a formidable challenge.Herein,a carbonized MXene/polyimide(C-MXene/PI)aerogel material integrating a spatially coupled hierarchically anisotropic structure with stepwise conductivity gradients was constructed.Electromagnetic waves propagate through the top-down vertical disordered horizontal architecture and progressive conductivity gradient of C-MXene/PI aerogel,undergoing stepwise absorption-dissipation-re-dissipation processes.The C-MXene/PI aerogel exhibits an average electromagnetic interference(EMI)shielding effectiveness of91.0 dB in X-band and a reflection coefficient of 0.40.In the terahertz frequency band,the average EMI shielding performance reaches66.2 dB with a reflection coefficient of 0.33.Furthermore,the heterolayered porous architecture of C-MXene/PI aerogels exhibits low thermal conductivity and reduced infrared emissivity,enabling exceptional infrared stealth capability across the 2-16μm wavelength spectrum.This study provides an feasible strategy for constructing low-reflectivity multi-spectrum compatible shielding materials.展开更多
Water storage in the Three Gorges Reservoir in China has increased the regional microseismicity.Bedding-rock landslides,one of the most common slope structures in the Three Gorges Reservoir,are highly prone to sliding...Water storage in the Three Gorges Reservoir in China has increased the regional microseismicity.Bedding-rock landslides,one of the most common slope structures in the Three Gorges Reservoir,are highly prone to sliding under seismic loading.Existing research primarily focuses on the stability of bedding rock landslides under strong earthquakes,while studies on the cumulative damage and long-term stability of bedding rock landslides under high-frequency microseismicity remain immature.In this study,we considered bedding rock landslides under high-frequency microseismicity in the Three Gorges Reservoir area as the research subject and equivalent microseismicity as pre-peak cyclic loading.First,we analyzed the shear strength deterioration of rock mass structural planes under pre-peak cyclic loading conditions and found that the deformation and failure of structural planes involve contact and damage effects.The shear strength of the rock mass structural planes under pre-peak cyclic loading conditions is affected by the confining pressure,loading rate,loading amplitude,and number of loading cycles.Among these factors,the shear strength of the structural planes was the most sensitive to the number of loading cycles.As the number of cycles increased,the rock mass structural planes underwent three stages:stress adjustment(increase in shear strength),fatigue damage(gradual decrease in shear strength),and structural failure(rapid decrease in shear strength).The stability of bedding rock landslides under high-frequency microseismicity was analyzed,revealing that the stability of bedding rock landslides under high-frequency microseismicity can be divided into three stages:short-term enhancement,gradual degradation,and rapid deterioration,exhibiting characteristics of gradual and sudden changes.展开更多
A method for correlating thermal light over a wide spectral range is proposed.A multi-wavelength pseudothermal source,prepared by projecting laser beams of multiple wavelengths(650 nm,635 nm,532 nm,and 473 nm)onto a m...A method for correlating thermal light over a wide spectral range is proposed.A multi-wavelength pseudothermal source,prepared by projecting laser beams of multiple wavelengths(650 nm,635 nm,532 nm,and 473 nm)onto a moving thin ground glass plate,is employed in a double-slit interference experiment.The ground glass plate induces random phase differences between light beams of different wavelengths passing through it.This initial random phase difference significantly influences the high-order intensity correlation functions of multi-wavelength thermal beams.Experimentally,second-order correlated interference patterns,including subwavelength interference,of pseudothermal beams with different wavelengths are observed in the intensity correlation measurements.This method facilitates applications of correlated thermal photons in quantum information processing and quantum imaging.展开更多
With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption ar...With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption are urgently required.This study presents a bio-inspired hierarchical composite foam fabricated using supercritical nitrogen foaming technology.This material exhibits a honeycomb structure,with pore cell sizes controllable within a range of 30–92μm by regulating the filler.The carbon fiber felt(CFf)provides efficient reflection of electromagnetic waves,while the chloroprene rubber/carbon fiber/carbon black foam facilitates both wave absorption and temperature monitoring through its optimized conductive network.This synergistic mechanism results in an EMI shielding effectiveness(SE)of 60.06 d B with excellent temperature sensing performance(The temperature coefficient of resistance(TCR)is-2.642%/℃)in the 24–70℃ range.Notably,the material has a thermal conductivity of up to 0.159 W/(m·K),and the bio-inspired layered design enables information encryption,demonstrating the material's potential for secure communication applications.The foam also has tensile properties of up to 5.13 MPa and a tear strength of 33.02 N/mm.This biomimetic design overcomes the traditional limitations of flexible materials and provides a transformative solution for next-generation applications such as flexible electronics,aerospace systems and military equipment,which urgently need integrated electromagnetic protection,thermal management and information security.展开更多
In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(...In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.展开更多
High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining prec...High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining precise photon frequencies,especially in the ultraviolet or even extreme ultraviolet regimes,is a key goal in both light–matter interaction experiments and engineering applications.High-order harmonic generation(HHG)is an ideal light source for producing such photons.In this work,we propose an optical temporal interference model(OTIM)that establishes an analogy with multi-slit Fraunhofer diffraction(MSFD)to manipulate fine-frequency photon generation by exploiting the temporal coherence of HHG processes.Our model provides a unified physical framework for three distinct non-integer HHG generation schemes:single-pulse,shaped-pulse,and laser pulse train approaches,which correspond to single-MSFD-like,double-MSFD-like,and multi-MSFD-like processes,respectively.Arbitrary non-integer HHG photons can be obtained using our scheme.Our approach provides a new perspective for accurately measuring and controlling photon frequencies in fields such as frequency comb technology,interferometry,and atomic clocks.展开更多
Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicate...Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.展开更多
Brain lesions,such as those caused by stroke or traumatic brain injury(TBI),frequently result in persistent motor and cognitive impairments that significantly affect the individual patient's quality of life.Despit...Brain lesions,such as those caused by stroke or traumatic brain injury(TBI),frequently result in persistent motor and cognitive impairments that significantly affect the individual patient's quality of life.Despite differences in the mechanisms of injury,both conditions share a high prevalence of motor and cognitive impairments.These deficits show only limited natural recovery.展开更多
To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding ...To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding performances remains crucial challenges.Herein,we propose a hierarchical manufacturing method that combines the use of 3D printing shear flow field and layer-by-layer assembly for fabricating the structurally customizable and multifunctional polylactic acid@graphene nanoparticle(PLA@GNs)materials.The dynamic behavior of polymer fluids is firstly explored via computational fluid dynamic simulation,and a Weissenberg number is employed to quantitatively analyze the disordered-to-ordered structural evolution of molecular chains and nanoparticles,allowing to tailor the micro-scale ordered structures.Subsequently,the macro-scale 3D architectures of PLA@GNs modules are fabricated by layer-by-layer assembly.Owing to the aligned GNs,the shielding performance reaches 41.2 d B,simultaneously accompanied by a directional thermal conductivity of 3.2 W m^(-1)K^(-1).Moreover,the potential application of 3D-printed shielding modules in specific civilian frequency bands such as 4G(1800–2100 MHz),Bluetooth(2402–2480 MHz),and 5G(3300–3800 MHz)is fully demonstrated.Overall,this work not only establishes a universal methodology about 3D printing shear flow field-driven orientation of two-dimensional nanoparticles within polymer fluids,but also gives a scientific method for advanced manufacturing of the next-generation electromagnetic functional modules for smart electronics.展开更多
We present a compact self-interference incoherent digital holography(SIDH)system that incorporates a quarter-waveplate(QWP)-based geometric phase(GP)lens to achieve high-fidelity,full-color holographic imaging under b...We present a compact self-interference incoherent digital holography(SIDH)system that incorporates a quarter-waveplate(QWP)-based geometric phase(GP)lens to achieve high-fidelity,full-color holographic imaging under broadband incoherent illumination.Traditional SIDH systems that utilize half-waveplate(HWP)-based GP lenses are hindered by unavoidable triple-wavefront polarization interference,stemming from chromatic dispersion in phase retardation.This interference introduces color-dependent artifacts in the reconstructed images.In contrast,our QWP-based design inherently suppresses such interference by using the non-diffracted beam as the reference,enabling stable dual-wavefront modulation.This approach produces phase-encoded polarization interference patterns that remain spectrally consistent across the red,green,and blue(RGB)channels.Experimental results demonstrate substantial noise suppression and significantly improved full-color image fidelity,supported by channelspecific noise analysis and structural similarity metrics.The system also preserves a simplified optical configuration without active polarization control,allowing for compact integration and cost-effective fabrication.These advantages position the proposed QWP-GP SIDH architecture as a promising solution for portable,real-time digital holographic 3D imaging,with scalable potential in applications such as augmented reality,optical diagnostics,and spectral holography.展开更多
In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoret...In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoretical principle of heterodyne LITES(H-LITES)signal generation is analyzed firstly,and an acetylene(C_(2)H_(2))H-LITES sensor is established to verify its performance.Experimental comparisons between the high-frequency QTF and a standard commercial QTF with resonant frequency of~32.768 kHz reveal that the high-frequency QTF exhibits a tenfold faster response time.Specifically,the H-LITES sensor with this QTF achieves a 33 ms measurement cycle,90%shorter than commercial counterparts.Furthermore,The SH-LITES technique is proposed to further shorten the scanning time to 15 ms,which achieves the shortest LITES measurement time known to date.To demonstrate its advantages in dynamic gas detection,an H_(2)O-LITES system integrating both QTF types is constructed for real-time monitoring of H_(2)O concentration during different respiration patterns.Comparative measurements show that the SH-LITES more accurately captures dynamic H_(2)O concentration fluctuations during respiration,outperforming the commercial QTF-based H-LITES sensor in rapid response scenarios.展开更多
Self-trapped excitons(STEs),known for their unique radiative properties,have been harnessed in diverse photonic devices;however,their comprehensive understanding and manipulation remain elusive.In this study,we presen...Self-trapped excitons(STEs),known for their unique radiative properties,have been harnessed in diverse photonic devices;however,their comprehensive understanding and manipulation remain elusive.In this study,we present novel experimental and theoretical evidence revealing the hybrid nature and optical tunability of STE state in Cs_(2)Ag_(0.4)Na_(0.6)InCl_(6).The detection of the Fano resonance in laser energy-dependent Raman and photoluminescence spectra indicates the emergence of an exciton-phonon hybrid state,arising from robust quantum interference between the discrete phonon and continuum exciton states.Moreover,we demonstrate continuous tuning of this hybrid state with the energy and intensity of the laser field.These findings lay the foundation for a comprehensive understanding of the nature of STE and their potential for state control.展开更多
The photoionization of a hydrogen atom from its ground state with ultra-fast chirped pulses is investigated by numerically solving the time-dependent Schrodinger equation within length,velocity,and Kramers-Henneberger...The photoionization of a hydrogen atom from its ground state with ultra-fast chirped pulses is investigated by numerically solving the time-dependent Schrodinger equation within length,velocity,and Kramers-Henneberger gauges.Converged results for all gauges for chirp-free pulses agree with the prediction of dynamic interference for ground state hydrogen atoms predicted recently by Jiang and Burgdorfer[Opt.Express 26,19921(2018)].In addition,we investigated photoelectron spectra of hydrogen atoms by chirped laser pulses,and showed that dynamic interference effect will be weaken for pulses with increasing linear chirp.Our numerical results can be understood and discussed in terms of an interplay of photoelectron wavepackets from first and second halves of laser enevelop,including the ac Stark energy level shift of the photoelectron final state and atomic stabilization effect at ultra-high intensities.展开更多
Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication,...Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.展开更多
China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and dis...China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and discontinuous,and there is no definite geological law to follow,which seriously threatens the safety of coal mine production and personnel life.Conventional ground geophysical methods have low accuracy in detecting goaf areas affected by mechanical interference from open-pit mines,especially for waterless goaf areas,which cannot be detected by existing methods.This article proposes the use of high-frequency electromagnetic waves for goaf detection.The feasibility of using drilling radar to detect goaf was theoretically analyzed,and a goaf detection model was established.The response characteristics of different fillers in the goaf under different frequencies of high-frequency electromagnetic waves were simulated and analyzed.In a certain open-pit mine in Inner Mongolia,100MHz high-frequency electromagnetic waves were used to detect the goaf through directional drilling on the ground.After detection,excavation verification was carried out,and the location of one goaf detected was verified.The results of engineering practice show that the application of high-frequency electromagnetic waves in goaf detection expands the detection radius of boreholes,has the advantages of high efficiency and accuracy,and has important theoretical and practical significance.展开更多
基金National Natural Science Foundation of China under Grant Nos.51622803 and 51878103China Postdoctoral Science Foundation under Grant No.2021M692689。
文摘Stress waves propagate along vertical,radial and circumferential directions when a non-uniformly distributed load is applied at one end of a three-dimensional shaft.As a result,the receiving signals are usually mixed with undesired interference components,often featuring as high-frequency fluctuations.Previous studies have revealed that sectional geometry(shape and size)greatly affects the high-frequency interference.In this study,low strain dynamic testing on full-scale X-section concrete is conducted in order to investigate the influences of high-frequency interference on velocity responses at the pile head.Emphasis is placed on the frequency and peak value of interference waves at various receiving points.Additionally,the effects of the geometrical,and mechanical properties of the pile shaft on high-frequency interference are elaborated on through the three-dimensional finite element method.The results show that the measured wave is obscured by interference waves superposed by two types of high-frequency components.The modulus and cross-sectional area are contributing factors to the frequency and peak value of the interference waves.On the other hand,the position with the least interference is determined,to some extent,by the accurate shape of the X-section.
基金supported by the science and technology project of State Grid Shanghai Municipal Electric Power Company(No.52094023003L).
文摘New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.
基金supported by the National Natural Science Foundation of China(Grant No.51008115)the Provincial Science Foundation of Jiangsu(Grant No.BK2008040)
文摘The high-frequency interference exists obviously in low strain integrity testing of large-diameter pipe pile when a transientpoint load is applied. An analytical solution of vertical vibratory response of large-diameter pipe piles in low strain testing isdeduced in this paper. The analytical solution is verified by both numerical simulation and model test results. The time-domainvelocity responses on pile top are analyzed. The calculation results indicate that the time-domain responses at various pointssuffer different high-frequency interferences, thus the peak values and phases of different points are different. The influence ofvibratory modes on high-frequency interference is analyzed. It is found that the high-frequency interference at 90° point main-ly derives from the second flexural mode, but for other points it mainly originates from the first flexural mode. The factors af-fecting the frequency and peak value of interference waves have been investigated in this study. The results indicate that thelarger radius angle between the receiving and 90° points leads to greater peak value of high frequency wave crest. The leasthigh-frequency interference is detected at the angle of 90°. The frequency of interference waves is decreased with the increaseof pile radius, while the peak value is almost constant. The frequency is also related to pile modulus, i.e. the larger pile modu-lus results in greater frequency. The peak value varies with impulse width and soil resistance, i.e., the wider impulse width andlarger soil resistance cause smaller peak value. In conclusion, the frequency of interference waves is dependent on the geomet-rical and mechanics characteristics of the piles such as pile radius and modulus, but independent of the external conditionssuch as impulse width and soil resistance. On the other hand, the peak value of interference waves is mainly dependent on theexternal conditions but independent of the geometrical and mechanics characteristics of the piles. In practice, some externalmeasures should be adopted to weaken high-frequency interference such as using soft hammer, hammer cushion and adoptingsuitable receiving point.
基金supported by the National Natural Science Foundation of China(No.11872211)。
文摘Focusing on the unclear mechanism of aerodynamic interference in overlapping rotors of heavy-load electric vertical take-off and landing(eVTOL)aircraft,this paper aims to reveal the aerodynamic interference characteristics and flow field evolution laws of overlapping rotor configurations in hovering conditions through numerical simulation methods.The research method involves constructing a computational model for rotor flow fields and aerodynamic characteristics based on the Reynolds-averaged Navier-Stokes(RANS)equations and the Spalart-Allmaras(S-A)turbulence model.The dynamic simulation of rotor rotational motion was achieved by using the moving nested grid technology.The reliability of the computational method was ensured through the grid independence verification and the comparison with experimental data.The research results indicate that in overlapping rotor systems,rotorⅡexperiences a decrease in thrust,significant power fluctuations,and reduced hovering efficiency due to continuous interference from the adjacent rotor’s wake and blade-vortex interactions.Blade-tip vortices undergo breakage,fusion,and secondary rolling in the overlapping region,forming large-scale turbulent structures that lead to attenuation of the induced velocity field and aerodynamic efficiency losses.Additionally,the interaction between the rotor downwash and the fuselage triggers a“fountain effect”and a sudden increase in surface pressure on the fuselage,exacerbating flow field distortion.Based on the aforementioned mechanisms,the safe flight of overlapping rotor configurations can be achieved by optimizing the configuration strategy of the rotational speed phase difference between adjacent blades.This study provides a theoretical basis for the rotor layout design and the aerodynamic performance enhancement of heavy-load eVTOL aircraft.
基金supported by the National Nature Science Foundation of China(Nos.12027901 and 12041202)Synchrotron Radiation Joint Fund of University of Science and Technology of China(Nos.KY2090000059 and KY2090000054)。
文摘There is a contradiction between the evolution rate of materials and the time resolution of SR-CT characterization in the in situ synchrotron radiation computed tomography(SR-CT)characterization of ultrafast evolution process.The sampling strategy of the ultra-sparse angle is an effective method for improving time resolution.Accurate reconstruction under sparse sampling conditions has always been a bottleneck problem.In recent years,convolutional neural networks have shown outstanding advantages in sparse-angle CT reconstruction given the development of deep learning.However,existing ideas did not consider the expression of high-frequency details in neural networks,limiting their application in accurate SR-CT characterization.A novel high-frequency information-constrained deep learning network(HFIC-Net)is proposed in response to this problem.Additional high-frequency information constraints are added to improve the accuracy of the reconstruction results.Further,a series of numerical reconstruction experiments are conducted to verify this new method,and the results indicate that the reconstruction results of HFIC-Net method effectively improve reconstruction quality.This new method uses only eight-angle projections to achieve the reconstruction effect of the filtered backprojection method(FBP)method in 360 projections.The results of the HFIC-Net method demonstrate clear boundaries and accurate detailed structures,correcting the misinformation caused by using other methods.For quantitative evaluation,the SSIM used to evaluate image structure similarity is increased from 0.1951,0.9212,and 0.9308 for FBP,FBP-Conv,and DDC-Net,respectively,to 0.9620 for HFIC-Net.Finally,the results of actual SR-CT experimental data indicate that the new method can suppress artifacts and achieve accurate reconstruction,and it is suitable for the in situ SR-CT accurate characterization of ultxafast evolution process.
基金supported by the Fundamental Research Funds for the Central Universities under No.2024KQ130the National Natural Science Foundation of China(No.52373259)。
文摘The advancement of next-generation high-frequency communication systems and stealth detection technologies necessitate the development of efficient,multi-spectrum compatible shielding materials.However,the achievement of simultaneous high efficiency and low reflectivity across microwave,terahertz,and infrared spectra remains a formidable challenge.Herein,a carbonized MXene/polyimide(C-MXene/PI)aerogel material integrating a spatially coupled hierarchically anisotropic structure with stepwise conductivity gradients was constructed.Electromagnetic waves propagate through the top-down vertical disordered horizontal architecture and progressive conductivity gradient of C-MXene/PI aerogel,undergoing stepwise absorption-dissipation-re-dissipation processes.The C-MXene/PI aerogel exhibits an average electromagnetic interference(EMI)shielding effectiveness of91.0 dB in X-band and a reflection coefficient of 0.40.In the terahertz frequency band,the average EMI shielding performance reaches66.2 dB with a reflection coefficient of 0.33.Furthermore,the heterolayered porous architecture of C-MXene/PI aerogels exhibits low thermal conductivity and reduced infrared emissivity,enabling exceptional infrared stealth capability across the 2-16μm wavelength spectrum.This study provides an feasible strategy for constructing low-reflectivity multi-spectrum compatible shielding materials.
基金sponsored by the General Program of the National Natural Science Foundation of China(Grant No.42407221)the Open Fund of State Key Laboratory of Geohazard Prevention and Geoenvironment Protection(Grant No.SKLGP2024K009)the Hubei Provincial Natural Science Foun-dation,China(Grant No.2023AFB567).
文摘Water storage in the Three Gorges Reservoir in China has increased the regional microseismicity.Bedding-rock landslides,one of the most common slope structures in the Three Gorges Reservoir,are highly prone to sliding under seismic loading.Existing research primarily focuses on the stability of bedding rock landslides under strong earthquakes,while studies on the cumulative damage and long-term stability of bedding rock landslides under high-frequency microseismicity remain immature.In this study,we considered bedding rock landslides under high-frequency microseismicity in the Three Gorges Reservoir area as the research subject and equivalent microseismicity as pre-peak cyclic loading.First,we analyzed the shear strength deterioration of rock mass structural planes under pre-peak cyclic loading conditions and found that the deformation and failure of structural planes involve contact and damage effects.The shear strength of the rock mass structural planes under pre-peak cyclic loading conditions is affected by the confining pressure,loading rate,loading amplitude,and number of loading cycles.Among these factors,the shear strength of the structural planes was the most sensitive to the number of loading cycles.As the number of cycles increased,the rock mass structural planes underwent three stages:stress adjustment(increase in shear strength),fatigue damage(gradual decrease in shear strength),and structural failure(rapid decrease in shear strength).The stability of bedding rock landslides under high-frequency microseismicity was analyzed,revealing that the stability of bedding rock landslides under high-frequency microseismicity can be divided into three stages:short-term enhancement,gradual degradation,and rapid deterioration,exhibiting characteristics of gradual and sudden changes.
基金supported by the National Natural Science Foundation of China(Grant Nos.62105278 and 11674273)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA015)。
文摘A method for correlating thermal light over a wide spectral range is proposed.A multi-wavelength pseudothermal source,prepared by projecting laser beams of multiple wavelengths(650 nm,635 nm,532 nm,and 473 nm)onto a moving thin ground glass plate,is employed in a double-slit interference experiment.The ground glass plate induces random phase differences between light beams of different wavelengths passing through it.This initial random phase difference significantly influences the high-order intensity correlation functions of multi-wavelength thermal beams.Experimentally,second-order correlated interference patterns,including subwavelength interference,of pseudothermal beams with different wavelengths are observed in the intensity correlation measurements.This method facilitates applications of correlated thermal photons in quantum information processing and quantum imaging.
基金financially supported by the Natural Science Foundation of Shandong Province(No.ZR2024QE446)。
文摘With the rapid development of intelligent electronic and military equipment,multifunctional flexible materials that integrat electromagnetic interference(EMI)shielding,temperature sensing,and information encryption are urgently required.This study presents a bio-inspired hierarchical composite foam fabricated using supercritical nitrogen foaming technology.This material exhibits a honeycomb structure,with pore cell sizes controllable within a range of 30–92μm by regulating the filler.The carbon fiber felt(CFf)provides efficient reflection of electromagnetic waves,while the chloroprene rubber/carbon fiber/carbon black foam facilitates both wave absorption and temperature monitoring through its optimized conductive network.This synergistic mechanism results in an EMI shielding effectiveness(SE)of 60.06 d B with excellent temperature sensing performance(The temperature coefficient of resistance(TCR)is-2.642%/℃)in the 24–70℃ range.Notably,the material has a thermal conductivity of up to 0.159 W/(m·K),and the bio-inspired layered design enables information encryption,demonstrating the material's potential for secure communication applications.The foam also has tensile properties of up to 5.13 MPa and a tear strength of 33.02 N/mm.This biomimetic design overcomes the traditional limitations of flexible materials and provides a transformative solution for next-generation applications such as flexible electronics,aerospace systems and military equipment,which urgently need integrated electromagnetic protection,thermal management and information security.
基金financially supported by the National Natural Science Foundation of China(No.52103127)the Opening Project of the State Key Laboratory of Polymer Materials Engineering(Sichuan University)(No.sklpme2022-4-10)Shaanxi Provincial Science and Technology Department(No.2025GH-YBXM-042).
文摘In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.
基金supported by the National Natural Science Foundation of China(Grant No.12304379)the Natural Science Foundation of Liaoning Province(Grant No.2024BS-269)the Guangdong Basic and Applied Basic Research Foundation(Grant No.025A1515011117)。
文摘High-precision optical frequency measurement serves as a cornerstone of modern science and technology,enabling advancements in fields ranging from fundamental physics to quantum information technologies.Obtaining precise photon frequencies,especially in the ultraviolet or even extreme ultraviolet regimes,is a key goal in both light–matter interaction experiments and engineering applications.High-order harmonic generation(HHG)is an ideal light source for producing such photons.In this work,we propose an optical temporal interference model(OTIM)that establishes an analogy with multi-slit Fraunhofer diffraction(MSFD)to manipulate fine-frequency photon generation by exploiting the temporal coherence of HHG processes.Our model provides a unified physical framework for three distinct non-integer HHG generation schemes:single-pulse,shaped-pulse,and laser pulse train approaches,which correspond to single-MSFD-like,double-MSFD-like,and multi-MSFD-like processes,respectively.Arbitrary non-integer HHG photons can be obtained using our scheme.Our approach provides a new perspective for accurately measuring and controlling photon frequencies in fields such as frequency comb technology,interferometry,and atomic clocks.
基金Project supported by the Basic Science Research Program through the National Research Foundation(NRF)of Korea funded by the Ministry of Science and ICT(No.RS-2024-00337001)。
文摘Physics-informed neural networks(PINNs)have been shown as powerful tools for solving partial differential equations(PDEs)by embedding physical laws into the network training.Despite their remarkable results,complicated problems such as irregular boundary conditions(BCs)and discontinuous or high-frequency behaviors remain persistent challenges for PINNs.For these reasons,we propose a novel two-phase framework,where a neural network is first trained to represent shape functions that can capture the irregularity of BCs in the first phase,and then these neural network-based shape functions are used to construct boundary shape functions(BSFs)that exactly satisfy both essential and natural BCs in PINNs in the second phase.This scheme is integrated into both the strong-form and energy PINN approaches,thereby improving the quality of solution prediction in the cases of irregular BCs.In addition,this study examines the benefits and limitations of these approaches in handling discontinuous and high-frequency problems.Overall,our method offers a unified and flexible solution framework that addresses key limitations of existing PINN methods with higher accuracy and stability for general PDE problems in solid mechanics.
基金supported by the Defitech Foundation(Morges,CH)to FCHthe Bertarelli Foundation-Catalyst program(Gstaad,CH)to FCH+2 种基金the Wyss Center for Bio and Neuroengineering the Lighthouse Partnership for AI-guided Neuromodulation to FCHthe Fonds de recherche du Quebec-Sante(FRQS#342969)to CEPthe Neuro X Postdoctoral Fellowship Program to CEP。
文摘Brain lesions,such as those caused by stroke or traumatic brain injury(TBI),frequently result in persistent motor and cognitive impairments that significantly affect the individual patient's quality of life.Despite differences in the mechanisms of injury,both conditions share a high prevalence of motor and cognitive impairments.These deficits show only limited natural recovery.
基金financially supported by the National Natural Science Foundation of China(52303036)the Natural Science Foundation of Guangxi(2024GXNSFBA010123)+2 种基金the International Science&Technology Innovation Cooperation Project of Sichuan Province(2024YFHZ0232)the International Science&Technology Cooperation Project of Chengdu(2021-GH03-00009-HZ)the Opening Project of State Key Laboratory of Polymer Materials Engineering(Sichuan University)(Sklpme2023-3-18)。
文摘To shield electronics from complicated electromagnetic environments caused by wireless electromagnetic waves,achieving elaborately structural manufacturing while not sacrificing electromagnetic interference shielding performances remains crucial challenges.Herein,we propose a hierarchical manufacturing method that combines the use of 3D printing shear flow field and layer-by-layer assembly for fabricating the structurally customizable and multifunctional polylactic acid@graphene nanoparticle(PLA@GNs)materials.The dynamic behavior of polymer fluids is firstly explored via computational fluid dynamic simulation,and a Weissenberg number is employed to quantitatively analyze the disordered-to-ordered structural evolution of molecular chains and nanoparticles,allowing to tailor the micro-scale ordered structures.Subsequently,the macro-scale 3D architectures of PLA@GNs modules are fabricated by layer-by-layer assembly.Owing to the aligned GNs,the shielding performance reaches 41.2 d B,simultaneously accompanied by a directional thermal conductivity of 3.2 W m^(-1)K^(-1).Moreover,the potential application of 3D-printed shielding modules in specific civilian frequency bands such as 4G(1800–2100 MHz),Bluetooth(2402–2480 MHz),and 5G(3300–3800 MHz)is fully demonstrated.Overall,this work not only establishes a universal methodology about 3D printing shear flow field-driven orientation of two-dimensional nanoparticles within polymer fluids,but also gives a scientific method for advanced manufacturing of the next-generation electromagnetic functional modules for smart electronics.
基金supported by the National Research Foundation(NRF)funded by the Korean government(MSIT)(No.RS-2024-00416272)supported by Electronics and Telecommunications Research Institute(ETRI)grant funded by ICT R&D program of MSIT/IITP[2019-0-00001,Development of Holo-TV Core Technologies for Hologram Media Services].
文摘We present a compact self-interference incoherent digital holography(SIDH)system that incorporates a quarter-waveplate(QWP)-based geometric phase(GP)lens to achieve high-fidelity,full-color holographic imaging under broadband incoherent illumination.Traditional SIDH systems that utilize half-waveplate(HWP)-based GP lenses are hindered by unavoidable triple-wavefront polarization interference,stemming from chromatic dispersion in phase retardation.This interference introduces color-dependent artifacts in the reconstructed images.In contrast,our QWP-based design inherently suppresses such interference by using the non-diffracted beam as the reference,enabling stable dual-wavefront modulation.This approach produces phase-encoded polarization interference patterns that remain spectrally consistent across the red,green,and blue(RGB)channels.Experimental results demonstrate substantial noise suppression and significantly improved full-color image fidelity,supported by channelspecific noise analysis and structural similarity metrics.The system also preserves a simplified optical configuration without active polarization control,allowing for compact integration and cost-effective fabrication.These advantages position the proposed QWP-GP SIDH architecture as a promising solution for portable,real-time digital holographic 3D imaging,with scalable potential in applications such as augmented reality,optical diagnostics,and spectral holography.
基金financial supports from the National Natural Science Foundation of China(Grant No.62335006,62275065,624B2050,62022032,and 62405078)Open Subject of Hebei Key Laboratory of Advanced Laser Technology and Equipment(HBKL-ALTE2025001)+2 种基金Heilongjiang Postdoctoral Fund(Grant No.LBH-Z23144 and LBH-Z24155)Natural Science Foundation of Heilongjiang Province(Grant No.LH2024F031)China Postdoctoral Science Foundation(Grant No.2024M764172).
文摘In this paper,a fast step heterodyne light-induced thermoelastic spectroscopy(SH-LITES)sensor using a high-frequency quartz tuning fork(QTF)with resonant frequency of~100 kHz is reported for the first time.The theoretical principle of heterodyne LITES(H-LITES)signal generation is analyzed firstly,and an acetylene(C_(2)H_(2))H-LITES sensor is established to verify its performance.Experimental comparisons between the high-frequency QTF and a standard commercial QTF with resonant frequency of~32.768 kHz reveal that the high-frequency QTF exhibits a tenfold faster response time.Specifically,the H-LITES sensor with this QTF achieves a 33 ms measurement cycle,90%shorter than commercial counterparts.Furthermore,The SH-LITES technique is proposed to further shorten the scanning time to 15 ms,which achieves the shortest LITES measurement time known to date.To demonstrate its advantages in dynamic gas detection,an H_(2)O-LITES system integrating both QTF types is constructed for real-time monitoring of H_(2)O concentration during different respiration patterns.Comparative measurements show that the SH-LITES more accurately captures dynamic H_(2)O concentration fluctuations during respiration,outperforming the commercial QTF-based H-LITES sensor in rapid response scenarios.
基金funding support from the National Natural Science Foundation of China(Grant No.12525405)funding support from the National Natural Science Foundation of China(Grant No.12393831)the CAS Project for Young Scientists in Basic Research(Grant No.YSBR-120)。
文摘Self-trapped excitons(STEs),known for their unique radiative properties,have been harnessed in diverse photonic devices;however,their comprehensive understanding and manipulation remain elusive.In this study,we present novel experimental and theoretical evidence revealing the hybrid nature and optical tunability of STE state in Cs_(2)Ag_(0.4)Na_(0.6)InCl_(6).The detection of the Fano resonance in laser energy-dependent Raman and photoluminescence spectra indicates the emergence of an exciton-phonon hybrid state,arising from robust quantum interference between the discrete phonon and continuum exciton states.Moreover,we demonstrate continuous tuning of this hybrid state with the energy and intensity of the laser field.These findings lay the foundation for a comprehensive understanding of the nature of STE and their potential for state control.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11774131 and 91850114)
文摘The photoionization of a hydrogen atom from its ground state with ultra-fast chirped pulses is investigated by numerically solving the time-dependent Schrodinger equation within length,velocity,and Kramers-Henneberger gauges.Converged results for all gauges for chirp-free pulses agree with the prediction of dynamic interference for ground state hydrogen atoms predicted recently by Jiang and Burgdorfer[Opt.Express 26,19921(2018)].In addition,we investigated photoelectron spectra of hydrogen atoms by chirped laser pulses,and showed that dynamic interference effect will be weaken for pulses with increasing linear chirp.Our numerical results can be understood and discussed in terms of an interplay of photoelectron wavepackets from first and second halves of laser enevelop,including the ac Stark energy level shift of the photoelectron final state and atomic stabilization effect at ultra-high intensities.
基金supported by the Fundamental Research Funds for the Central Universities and Heilongjiang Provincial Natural Science Foundation of China(Grant No.YQ2020E009).
文摘Robust, ultra-flexible, and multifunctional MXene-basedelectromagnetic interference (EMI) shielding nanocomposite filmsexhibit enormous potential for applications in artificial intelligence,wireless telecommunication, and portable/wearable electronic equipment.In this work, a nacre-inspired multifunctional heterocyclic aramid(HA)/MXene@polypyrrole (PPy) (HMP) nanocomposite paper withlarge-scale, high strength, super toughness, and excellent tolerance tocomplex conditions is fabricated through the strategy of HA/MXenehydrogel template-assisted in-situ assembly of PPy. Benefiting from the"brick-and-mortar" layered structure and the strong hydrogen-bondinginteractions among MXene, HA, and PPy, the paper exhibits remarkable mechanical performances, including high tensile strength (309.7 MPa),outstanding toughness (57.6 MJ m−3), exceptional foldability, and structural stability against ultrasonication. By using the template effect ofHA/MXene to guide the assembly of conductive polymers, the synthesized paper obtains excellent electronic conductivity. More importantly,the highly continuous conductive path enables the nanocomposite paper to achieve a splendid EMI shielding effectiveness (EMI SE) of 54.1 dBat an ultra-thin thickness (25.4 μm) and a high specific EMI SE of 17,204.7 dB cm2g−1. In addition, the papers also have excellent applicationsin electromagnetic protection, electro-/photothermal de-icing, thermal therapy, and fire safety. These findings broaden the ideas for developinghigh-performance and multifunctional MXene-based films with enormous application potential in EMI shielding and thermal management.
文摘China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and discontinuous,and there is no definite geological law to follow,which seriously threatens the safety of coal mine production and personnel life.Conventional ground geophysical methods have low accuracy in detecting goaf areas affected by mechanical interference from open-pit mines,especially for waterless goaf areas,which cannot be detected by existing methods.This article proposes the use of high-frequency electromagnetic waves for goaf detection.The feasibility of using drilling radar to detect goaf was theoretically analyzed,and a goaf detection model was established.The response characteristics of different fillers in the goaf under different frequencies of high-frequency electromagnetic waves were simulated and analyzed.In a certain open-pit mine in Inner Mongolia,100MHz high-frequency electromagnetic waves were used to detect the goaf through directional drilling on the ground.After detection,excavation verification was carried out,and the location of one goaf detected was verified.The results of engineering practice show that the application of high-frequency electromagnetic waves in goaf detection expands the detection radius of boreholes,has the advantages of high efficiency and accuracy,and has important theoretical and practical significance.
