An aerobic bacterium strain, F-3-4, capable of effectively degrading 2,6-di-tert-butylphenol(2,6-DTBP), was isolated and screened out from an acrylic fiber wastewater and the biofilm in the wastewater treatment facili...An aerobic bacterium strain, F-3-4, capable of effectively degrading 2,6-di-tert-butylphenol(2,6-DTBP), was isolated and screened out from an acrylic fiber wastewater and the biofilm in the wastewater treatment facilities. This strain was identified as Alcaligenes sp. through morphological, physiological and biochemical examinations. After cultivation, the strain was enhanced by 26.3% in its degradation capacity for 2,6-DTBP. Results indicated that the strain was able to utilize 2,6-DTBP, lysine, lactamine, citrate, n-utenedioic acid and malic acid as the sole carbon and energy source, alkalinize acetamide, asparagine, L-histidine, acetate, citrate and propionate, but failed to utilize glucose, D-fructose, D-seminose, D-xylose, serine and phenylalanine as the sole carbon and energy source. The optimal growth conditions were determined to be: temperature 37℃, pH 7.0, inoculum size 0.1% and shaker rotary speed 250 r/min. Under the optimal conditions, the degradation kinetics of 2,6-DTBP with an initial concentration of 100 mg/L was studied. Results indicated that 62.4% of 2,6-DTBP was removed after 11 d. The degradation kinetics could be expressed by Eckenfelder equation with a half life of 9.38 d. In addition, the initial concentration of 2,6-DTBP played an important role on the degradation ability of the strain. The maximum initial concentration of 2,6-DTBP was determined to be 200 mg/L. Above this level, the strain was overloaded and exhibited significant inhibition.展开更多
Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Here...Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Herein,to address the deficiencies associated with the commonly used dealloying methods,for example,electrochemical and sulfuric acid/nitric acid treatment,we report an acetic acid-assisted mild strategy to dealloy Cu atoms from the outer surface layers of CuPd alloy nanoparticles to achieve high-efficiency electrocatalysis for oxygen reduction and ethanol oxidation in an alkaline electrolyte.The leaching of Cu atoms by acetic acid exerts an additional compressive strain effect on the surface layers and exposes more active Pd atoms,which is beneficial for boosting the catalytic performance of a dealloyed catalyst for the oxygen reduction reaction(ORR)and the ethanol oxidation reaction(EOR).In particular,for ORR,the CuPd nanoparticles with a Pd/Cu molar ratio of 2:1 after acetic dealloying show a half-wave potential of 0.912 V(vs.RHE)and a mass activity of 0.213 AmgPd^(-1)at 0.9 V,respectively,while for EOR,the same dealloyed sample has a mass activity and a specific activity of 8.4 Amg^(-1)and 8.23 mA cm^(-2),respectively,much better than their dealloyed counterparts at other temperatures and commercial Pd/C as well as a Pt/C catalyst.展开更多
Graphene,owing to its exceptional electronic,optical,thermal,and mechanical properties,has emerged as a highly promising material.Currently,the synthesis of large-area graphene films on metal substrates via chemical v...Graphene,owing to its exceptional electronic,optical,thermal,and mechanical properties,has emerged as a highly promising material.Currently,the synthesis of large-area graphene films on metal substrates via chemical vapor deposition remains the predominant approach for producing high-quality graphene.To realize the potential applications of graphene,it is essential to transfer graphene films to target substrates in a manner that is non-destructive,clean,and efficient,as this significantly affects the performance of graphene devices.This review examines the current methods for graphene transfer from three perspectives:non-destructive transfer,clean transfer,and high-efficiency transfer.It analyzes and compares the advancements and limitations of various transfer techniques.Finally,the review identifies the key challenges faced by current graphene transfer methods and anticipates future developmental prospects.展开更多
Through literature analysis and case study, the introduction history, variety selection (high bush, half high bush, low bush) and regional cultivation techniques of blueberry in China were summarized, and the practica...Through literature analysis and case study, the introduction history, variety selection (high bush, half high bush, low bush) and regional cultivation techniques of blueberry in China were summarized, and the practical effects of precision cultivation (water and fertilizer integration, wild planting) and under-forest economic model (forest-blueberry-fungus system, ecological tourism) were evaluated. It provided a technical reference for expanding the planting scale of blueberry and improving the fruit quality.展开更多
The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-do...The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-dosage and high-efficiency CFIs for diesel,1,2,3,6-tetrahydrophthalic anhydride(THPA)was introduced as a third and polar monomer to enhance the depressive effects of alkyl methacrylatetrans anethole copolymers(C_(14)MC-TA).The terpolymers of alkyl methacrylate-trans anethole-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-TA-THPA)were synthesized and compared with the binary copolymers of C_(14)MC-TA and alkyl methacrylate-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-THPA).Results showed that C_(14)MC-THPA achieved the best depressive effects on the cold filter plugging point(CFPP)and solid point(SP)by 11℃and 16℃at a dosage of 1250 mg/L and monomer ratio of 6:1,while 1500mg/L C_(14)MC-TA(1:1)reached the optimal depressive effects on the CFPP and SP by 12℃and 18℃.THPA introduction significantly improved the depressive effects of C_(14)MC-TA.Lower dosages of C_(14)MCTA-THPA in diesel exerted better improvement effects on the CFPP and SP than that of C_(14)MC-TA and C_(14)MC-THPA.When the monomer ratio and dosage were 6:0.6:0.4 and 1000 mg/L,the improvement effect of C_(14)MC-TA-THPA on diesel reached the optimum level,and the CFPP and SP were reduced by 13℃and 19℃,respectively.A 3D nonlinear surface diagram fitted by a mathematical model was also used for the first time to better understand the relationships of monomer ratios,dosages,and depressive effects of CFIs in diesel.Surface analysis results showed that C_(14)MC-TA-THPA achieved the optimum depressive effects at a monomer ratio of 6:0.66:0.34 and dosage of 1000 mg/L,and the CFPP and SP decreased by 14℃ and 19℃,respectively.The predicted results were consistent with the actual ones.Additionally,the improvement mechanism of these copolymers in diesel was also explored.展开更多
With the development of electronic technologies,piezoresistive sensors have attracted increasing attention.Among them,aerogels with high elasticity,as a type of three-dimensional porous material,are widely used in the...With the development of electronic technologies,piezoresistive sensors have attracted increasing attention.Among them,aerogels with high elasticity,as a type of three-dimensional porous material,are widely used in the field of piezoresistive sensors.Nowadays,with the extension of science and technology areas,fields involving low-temperature environments have emerged,which has led to an increasing demand for piezoresistive sensors that can serve at cryogenic temperatures.However,most studies on aerogels have only focused on their sensing performance at room temperature,and there is a lack of research on aerogel sensors that can work at low temperatures.In this work,piezoresistive sensors based on cotton fibers were proposed for applications at 77 K.As one of the most important natural polymers,cotton fibers have the ability to maintain elasticity at very low temperatures.Cotton fiber-based aerogels with high elasticity and cyclic stability were obtained by controlling the freeze-casting parameters and size distribution of cotton fibers,and they showed excellent pressure sensing properties,including a wide sensing range and remarkable long-term stability.This study bridges the gap in cryogenic sensing materials and provides insights into microstructure-property relationships,advancing applications in aerospace and cryogenic engineering.展开更多
Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharid...Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharide hydrogels with good mechanical properties.MCA-Li Cl hydrogels were prepared by introducing methacrylated hyaluronic acid(Me HA)into the polymer network in the presence of acrylic acid(AA),acryloyloxyethyltrimethyl ammonium chloride(CATAC),and metal ions.The polymer network not only has a chemically cross-linked network and a tough network structure,but also benefits from a variety of supramolecular interactions,such as hydrogen bonding and coordination covalent bonding,resulting in excellent mechanical properties,with an elongation at break of 1390%,a tensile strength of up to 1200 k Pa,a toughness of 9.4546 MJ/m^(3),and adhesive properties towards various substrates.At the same time,the hydrogel has a high conductivity(5.33 mS/cm)and high strain-sensing sensitivity(Gauge factor=2.55).The flexible strain sensor assembled from the prepared MCA-Li Cl hydrogel can be used to detect human movements,from micro-expressions(smiles,swallowing)to pulse signals and other physiological activities,as well as large-scale joint movements(wrists,elbows,knees,fingers,etc.),realizing the real-time monitoring of full-scale human movements.The prepared hydrogels have potential applications in wearable devices,electronic skin,and strain-sensor components.展开更多
Single-crystal GaN epilayers were irradiated with heavy inert gas ions(2.3-MeV Ne^(8+),5.3-MeV Kr^(19+))to fluences ranging from 1.0×1.0^(11) to 1.0×1.0^(15)ions∕cm^(2).The strain-related damage accumulatio...Single-crystal GaN epilayers were irradiated with heavy inert gas ions(2.3-MeV Ne^(8+),5.3-MeV Kr^(19+))to fluences ranging from 1.0×1.0^(11) to 1.0×1.0^(15)ions∕cm^(2).The strain-related damage accumulation versus ion fluences was studied using highresolution X-ray diffraction(HRXRD)and ultraviolet–visible(UV–Vis)spectroscopy.The results showed that the damage accumulation was mainly dominated by nuclear energy loss.When the ion fluence was less than∼0.055 displacement per atom(dpa),the lattice expansions and lattice strains markedly increased linearly with increasing ion fluences,accompanied by a slow enhancement in the dislocation densities,distortion parameters,and Urbach energy for both ion irradiations.Above this fluence(∼0.055 dpa),the lattice strains presented a slight increase,whereas a remarkable increase was observed in the dislocation densities,distortion parameters,and Urbach energy with the ion fluences after both ion irradiations.∼0.055 dpa is the threshold ion fluence for defect evolution and lattice damage related to strain.The mechanisms underlying the damage accumulation are discussed in detail.展开更多
MoTe_(2) has emerged as a promising candidate in the field of integrated circuits,memristive devices,and catalysts,owing to its polymorphic nature across different phases.Experimentally,strain engineering has been dem...MoTe_(2) has emerged as a promising candidate in the field of integrated circuits,memristive devices,and catalysts,owing to its polymorphic nature across different phases.Experimentally,strain engineering has been demonstrated as an effective approach for manipulating the phase transition of MoTe_(2),but the mechanism remains unclear.The strain-dependent phase transition and its micro-mechanisms have been investigated based on first principle calculations.As demonstrated,critical strain and phase transition path from H→T'phases are strongly governed by the applied strain's orientation,magnitude,and triaxiality.At the atomic level,nonzero movements of Te atoms within the phase transition domain with mechanical unloading have been clarified,together with an advanced understanding on the impact of strain on Te-vacancies migration.These insights advanced the knowledge of MoTe_(2) phase transition behavior and demonstrated the large space to explore potential applications through strain,defect,and phase engineering.展开更多
Temperature stability is essential for the precision of flexible sensors.However,constrained by the composite principle of heterogeneous materials,the existing self-compensating methods encounter substantial challenge...Temperature stability is essential for the precision of flexible sensors.However,constrained by the composite principle of heterogeneous materials,the existing self-compensating methods encounter substantial challenges.To tackle this,high-entropy alloy nanofibers were utilized to construct a flexible strain sensor with inherent temperature stability.This approach leverages the electrohydrodynamic direct writing;a precursor conductive network was established through the electrospinning of a high-entropy alloy acetate and polyvinylidene difluoride solution blend.Subsequently,annealing treatment facilitated metallization,resulting in the synergistic preservation of polymer stretchability and the low temperature coefficient of resistance properties of high-entropy alloys inside the nanofibers.The test results demonstrate that the high-entropy alloys flexible strain sensor exhibits a remarkably low temperature coefficient of resistance(45.59 ppm K^(-1))across the range of-10 to 70℃,a sensitivity coefficient GF of 1.12 with a 50%strain range,and a response time of 310 ms.After 6000 stretching cycles,no baseline drift or failure occurred,indicating excellent cyclic stability.Furthermore,the outstanding temperature stability of the sensor was validated through wearable application and robotic hands strain sensing conducted under varied environment temperatures.This work provides a viable design pathway for developing flexible sensors with an inherently low temperature coefficient of resistance.展开更多
Granular materials exhibit complex macroscopic mechanical behaviors closely related to their microscalemicrostructural features.Traditional macroscopic phenomenological elasto-plastic models,however,usually have compl...Granular materials exhibit complex macroscopic mechanical behaviors closely related to their microscalemicrostructural features.Traditional macroscopic phenomenological elasto-plastic models,however,usually have complex formulations and lack explicit relations to these microstructural features.To avoid these limitations,this study proposes a micromechanics-based softening hyperelastic model for granular materials,integrating softening hyperelasticity withmicrostructural insights to capture strain softening,critical state,and strain localization behaviors.The model has two key advantages:(1)a clear conceptualization,straightforward formulation,and ease of numerical implementation(via Abaqus UMAT subroutine in this study);(2)explicit incorporation of micro-scale features(e.g.,contact stiffness,particle size,porosity)to reveal their influences on macroscopic responses.An isotropic directional distribution density of contacts and three specific microstructures are considered,and their softening hyperelastic constitutive modulus tensors are explicitly derived.By introducing a softening factor and critical failure energy density,the model can describe geomaterial behaviors,simulating residual strength,X-shaped shear bands,and strain localization evolution.Numerical validations in comparison with themacro-scale hyperelastic model,Abaqus Drucker-Prager model,and the experiment confirm its accuracy.Parametric studies reveal critical dependencies:a normal to tangential contact stiffness ratio of 2-8(depending on stiffness magnitude),an internal length of 2-4 mm to ensure shear band formation,and a critical failure energy density(≤10 kJ/m^(3))to trigger strain softening and localization.Influences of the specific microstructures on strain localization and softening are investigated.The model also shows mesh independence due to the introduction of an internal length.The model’s applicability is further demonstrated by slope stability analysis,capturing slip surface evolution,and load-displacement characteristics.This study develops a robust microstructure-aware hyperelastic framework to describe the mechanical behaviors of granular materials,providing multiscale insights for geotechnical engineering applications.展开更多
Large magnetic entropy change(△S_(M))can realize a prominent heat transformation under the magnetic field and directly strengthen the efficacy of the magnetocaloric effect,which provides a pioneering environmentally ...Large magnetic entropy change(△S_(M))can realize a prominent heat transformation under the magnetic field and directly strengthen the efficacy of the magnetocaloric effect,which provides a pioneering environmentally friendly solidstate strategy to improve refrigeration capacities and efficiencies.The second-order magnetic transition(SOMT)materials have broader△S_(M) peaks without thermal hysteresis,making them highly attractive in magnetic refrigeration,especially in the room temperature range.Here,we report a significant enhancement of△S_(M) at room temperature in single-crystal Mn_(5)Ge_(3).In this SOMT system,we realize a 60%improvement of-△S_(M)^(max) from 3.5 J/kg·K to 5.6 J/kg·K at T=300 K.This considerable enhancement of△S_(M) is achieved by intentionally introducing strain energy through high-pressure constrained deformation.Both experimental results and Monte Carlo simulations demonstrate that the enhancement of△S_(M) originates from the microscopic strain and lattice deformation induced by strain energy after deformation.This strain energy will reconstruct the energy landscape of this ferromagnetic system and enhance magnetization,resulting in a giant intensity of magnetocaloric responses.Our findings provide an approach to increase magnetic entropy change and may give fresh ideas for exploring advanced magnetocaloric materials.展开更多
This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture ...This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.展开更多
A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relax...A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.展开更多
Rapid quantification of seismic-induced damage immediately following an earthquake is critical for determining whether a structure is safe for continued occupation or requires evacuation.This study proposes a novel da...Rapid quantification of seismic-induced damage immediately following an earthquake is critical for determining whether a structure is safe for continued occupation or requires evacuation.This study proposes a novel damage identification method that utilizes limited strain data points,significantly reducing installation,maintenance,and data analysis costs compared to traditional distributed sensor networks.The approach integrates finite element(FE)modeling to generate capacity curves through pushover analysis,incorporates noise-augmented datasets for Artificial Neural Network(ANN)training,and classifies structural conditions into four damage levels:Operational(OP),Immediate Occupancy(IO),Life Safety(LS),and Collapse Prevention(CP).To evaluate the method’s accuracy and efficiency,it was applied to two reinforced concrete(RC)frames;a single-story frame tested experimentally under cyclic loading and a three-story frame analyzed under various lateral load patterns.Strain data from selected beam and column ends were used as ANN inputs,while the corresponding damage classes served as outputs.Confusion matrix results demonstrated high true positive rates(>85%for the single-story and>90%for the three-story frame),even with a reduced number of sensors.The model also exhibited strong robustness to White Gaussian Noise(SNR=2.5-5 dB)and generalized effectively to nonlinear time-history analyses under scaled ground motions(PGA=0.1-1.0 g).Feature selection using the MRMR and ANOVA algorithms further enhanced computational efficiency.Overall,the proposed ANN-based framework has strong potential for real-time structural health monitoring applications.展开更多
High-performance fiber fabrics and composites experienced transverse compression deformation at ultrahigh strain rates near the impact point when subjected to high-velocity impacts,which significantly affected their b...High-performance fiber fabrics and composites experienced transverse compression deformation at ultrahigh strain rates near the impact point when subjected to high-velocity impacts,which significantly affected their ballistic limits.In this paper,a fiber-scale experimental method for characterizing ultrahigh strain-rate transverse compression behavior was proposed.To begin with,in order to measure the extremely low stress and strain in small specimens,the conventional Hopkinson bar was reduced to the hundred-micron scale,thereby achieving wave impedance matching with single fibers.In addition,tangential and normal laser Doppler velocimetry(LDV)methods were employed to realize non-contact,high-precision,and high-speed axial velocity measurements of micron-scale incident and transmission bars,respectively.Meanwhile,a microscopic observation system was used to facilitate the installation of miniature fiber samples.The experimental setup and procedures were introduced,and the system accuracy was verified through sample-free loading tests based on one-dimensional stress wave propagation theory.Dynamic compression experiments on Graphene-UHMWPE fibers were carried out,followed by post-compression microstructural characterization via scanning electron microscopy(SEM).Results demonstrated that successful mechanical characterization was achieved at strain rates exceeding 105,an order of magnitude higher than the previously reported maximum rates.Furthermore,during the loading process,the fibers underwent uniform compression deformation while exhibiting pronounced strain-rate effects.This method offers a novel approach for dynamic mechanical characterization of microscale single fibers,enabling the development of comprehensive strain-ratedependent material models to guide the design of advanced composites and high-performance fibers.展开更多
High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiat...High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiation resistance.Recent experimental studies have demonstrated that W-Ta-Cr-V alloys exhibit excellent irradiation resistance under helium(He)ion irradiation.However,the underlying mechanisms,especially the migration behavior of He atoms,remain unclear.In this work,the influences of uniaxial tensile and compressive strain on He migration in W-Ta-Cr-V complex alloys have been systematically studied through first-principles calculations.Our results demonstrate that He atoms preferentially occupy the tetrahedral interstitial sites,with interstitial formation energies significantly reduced compared to pure W.The introduction of Ta,Cr,and V alloying elements markedly increases the He migration barriers,effectively suppressing He diffusion.Compressive strain increases the migration barriers,inhibiting He bubbles nucleation and growth,while tensile strain decreases the barriers,facilitating bubble formation.Compared to pure W,the W-Ta-Cr-V alloys exhibit both lower He interstitial formation energies and higher migration barriers,with further enhancement under compressive strain.Specifically,compressive strain of 6%increases the He migration barrier of the W-Ta-Cr-V alloy by 0.166 e V,which further widens the difference relative to pure W.These findings provide a theoretical explanation for the superior irradiation resistance of tungsten-based alloys observed experimentally and promote the understanding of irradiation damage in these alloys under strain.展开更多
Tellurene,a chiral chain semiconductor with a narrow bandgap and exceptional strain sensitivity,emerges as a pivotal material for tailoring electronic and optoelectronic properties via strain engineering.This study el...Tellurene,a chiral chain semiconductor with a narrow bandgap and exceptional strain sensitivity,emerges as a pivotal material for tailoring electronic and optoelectronic properties via strain engineering.This study elucidates the fundamental mechanisms of ultrafast laser shock imprinting(LSI)in two-dimensional tellurium(Te),establishing a direct relationship between strain field orientation,mold topology,and anisotropic structural evolution.This is the first demonstration of ultrafast LSI on chiral chain Te unveiling orientation-sensitive dislocation networks.By applying controlled strain fields parallel or transverse to Te’s helical chains,we uncover two distinct deformation regimes.Strain aligned parallel to the chain’s direction induces gliding and rotation governed by weak interchain interactions,preserving covalent intrachain bonds and vibrational modes.In contrast,transverse strain drives shear-mediated multimodal deformations—tensile stretching,compression,and bending—resulting in significant lattice distortions and electronic property modulation.We discovered the critical role of mold topology on deformation:sharp-edged gratings generate localized shear forces surpassing those from homogeneous strain fields via smooth CD molds,triggering dislocation tangle formation,lattice reorientation,and inhomogeneous plastic deformation.Asymmetrical strain configurations enable localized structural transformations while retaining single-crystal integrity in adjacent regions—a balance essential for functional device integration.These insights position LSI as a precision tool for nanoscale strain engineering,capable of sculpting 2D material morphologies without compromising crystallinity.By bridging ultrafast mechanics with chiral chain material science,this work advances the design of strain-tunable devices for next-generation electronics and optoelectronics,while establishing a universal framework for manipulating anisotropic 2D systems under extreme strain rates.This work discovered crystallographic orientation-dependent deformation mechanisms in 2D Te,linking parallel strain to chain gliding and transverse strain to shear-driven multimodal distortion.It demonstrates mold geometry as a critical lever for strain localization and dislocation dynamics,with sharp-edged gratings enabling unprecedented control over lattice reorientation.Crucially,the identification of strain field conditions that reconcile severe plastic deformation with single-crystal retention offers a pathway to functional nanostructure fabrication,redefining LSI’s potential in ultrafast strain engineering of chiral chain materials.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
Microorganisms are crucial for the breakdown of proteins and lipids in dry-fermented sausages and are intimately associated with the flavor profile of sausages.In this study,we used a mixed starter culture to ferment ...Microorganisms are crucial for the breakdown of proteins and lipids in dry-fermented sausages and are intimately associated with the flavor profile of sausages.In this study,we used a mixed starter culture to ferment sausages and investigated the flavor turnover.During the fermentation of salami,the data from free amino acids(FAAs),free fatty acids(FFAs)and volatile flavor substances were used to assess the quality of salami.At the end of fermentation,the total FAAs increased from 1171.32 to 4582.48 mg/kg in the control group and 5053.25 mg/kg in the experimental group.Additionally,following inoculation with the mixed starter culture,the levels of glutamic acid,lysine,methionine,valine and leucine were significantly higher(P<0.05)than those in the control group.Oleic acid(C_(18:1))and chondritic acid(C_(16:0))were the two most abundant FFAs in both salami samples with 45.86%and 26.07%on the 23^(th)day in mixed culture inoculated salami.The mixed starter inoculated group had significantly lower saturated fatty acids and higher percentage levels of monounsaturated fatty acids than the control group(P<0.05).In the volatile flavor substance analysis,a total of 61 volatile compounds were found.Ester compounds were progressively enriched with drying time,significantly increasing the flavor substances,like ethyl diphosgene,1-octen-3-ol,and 2,3-butanediol at P<0.05.The correlation analysis between the core flora and volatile flavor compounds during fermentation and maturation of salami indicates Lactobacillus sakei and Lactobacillus rhamnosus were significantly higher and positively correlated with the major volatile organic compounds,which are the key core microorganisms affecting the flavor quality of fermented sausages.展开更多
文摘An aerobic bacterium strain, F-3-4, capable of effectively degrading 2,6-di-tert-butylphenol(2,6-DTBP), was isolated and screened out from an acrylic fiber wastewater and the biofilm in the wastewater treatment facilities. This strain was identified as Alcaligenes sp. through morphological, physiological and biochemical examinations. After cultivation, the strain was enhanced by 26.3% in its degradation capacity for 2,6-DTBP. Results indicated that the strain was able to utilize 2,6-DTBP, lysine, lactamine, citrate, n-utenedioic acid and malic acid as the sole carbon and energy source, alkalinize acetamide, asparagine, L-histidine, acetate, citrate and propionate, but failed to utilize glucose, D-fructose, D-seminose, D-xylose, serine and phenylalanine as the sole carbon and energy source. The optimal growth conditions were determined to be: temperature 37℃, pH 7.0, inoculum size 0.1% and shaker rotary speed 250 r/min. Under the optimal conditions, the degradation kinetics of 2,6-DTBP with an initial concentration of 100 mg/L was studied. Results indicated that 62.4% of 2,6-DTBP was removed after 11 d. The degradation kinetics could be expressed by Eckenfelder equation with a half life of 9.38 d. In addition, the initial concentration of 2,6-DTBP played an important role on the degradation ability of the strain. The maximum initial concentration of 2,6-DTBP was determined to be 200 mg/L. Above this level, the strain was overloaded and exhibited significant inhibition.
基金the financial support provided by the National Natural Science Foundation of China(22075290,21972068,52164028)the Beijing Natural Science Foundation(Z200012)+3 种基金the State Key Laboratory of Multiphase Complex Systemsthe Institute of Process Engineeringthe Chinese Academy of Sciences(MPCS-2021-A-05)the Nanjing IPE Institute of Green Manufacturing Industry(E0010725).
文摘Dealloying by which the transition metal is partially or completely leached from an alloy precursor is an effective way to optimize the fundamental effects for further enhancing the electrocatalysis of a catalyst.Herein,to address the deficiencies associated with the commonly used dealloying methods,for example,electrochemical and sulfuric acid/nitric acid treatment,we report an acetic acid-assisted mild strategy to dealloy Cu atoms from the outer surface layers of CuPd alloy nanoparticles to achieve high-efficiency electrocatalysis for oxygen reduction and ethanol oxidation in an alkaline electrolyte.The leaching of Cu atoms by acetic acid exerts an additional compressive strain effect on the surface layers and exposes more active Pd atoms,which is beneficial for boosting the catalytic performance of a dealloyed catalyst for the oxygen reduction reaction(ORR)and the ethanol oxidation reaction(EOR).In particular,for ORR,the CuPd nanoparticles with a Pd/Cu molar ratio of 2:1 after acetic dealloying show a half-wave potential of 0.912 V(vs.RHE)and a mass activity of 0.213 AmgPd^(-1)at 0.9 V,respectively,while for EOR,the same dealloyed sample has a mass activity and a specific activity of 8.4 Amg^(-1)and 8.23 mA cm^(-2),respectively,much better than their dealloyed counterparts at other temperatures and commercial Pd/C as well as a Pt/C catalyst.
基金supported by the National Key R&D Program of China(2020YFB2009002).
文摘Graphene,owing to its exceptional electronic,optical,thermal,and mechanical properties,has emerged as a highly promising material.Currently,the synthesis of large-area graphene films on metal substrates via chemical vapor deposition remains the predominant approach for producing high-quality graphene.To realize the potential applications of graphene,it is essential to transfer graphene films to target substrates in a manner that is non-destructive,clean,and efficient,as this significantly affects the performance of graphene devices.This review examines the current methods for graphene transfer from three perspectives:non-destructive transfer,clean transfer,and high-efficiency transfer.It analyzes and compares the advancements and limitations of various transfer techniques.Finally,the review identifies the key challenges faced by current graphene transfer methods and anticipates future developmental prospects.
文摘Through literature analysis and case study, the introduction history, variety selection (high bush, half high bush, low bush) and regional cultivation techniques of blueberry in China were summarized, and the practical effects of precision cultivation (water and fertilizer integration, wild planting) and under-forest economic model (forest-blueberry-fungus system, ecological tourism) were evaluated. It provided a technical reference for expanding the planting scale of blueberry and improving the fruit quality.
基金supported from the Natural Science Foundation Project of Shanghai(Nos.23ZR1425300 and 22ZR1426100)Experimental Technical Team Construction Project of Shanghai Education Commission(No.10110N230080)+1 种基金National Natural Science Foundation of China(No.22075183)Research and Innovation Project of Shanghai Municipal Education Commission(No.2023ZKZD54).
文摘The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-dosage and high-efficiency CFIs for diesel,1,2,3,6-tetrahydrophthalic anhydride(THPA)was introduced as a third and polar monomer to enhance the depressive effects of alkyl methacrylatetrans anethole copolymers(C_(14)MC-TA).The terpolymers of alkyl methacrylate-trans anethole-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-TA-THPA)were synthesized and compared with the binary copolymers of C_(14)MC-TA and alkyl methacrylate-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-THPA).Results showed that C_(14)MC-THPA achieved the best depressive effects on the cold filter plugging point(CFPP)and solid point(SP)by 11℃and 16℃at a dosage of 1250 mg/L and monomer ratio of 6:1,while 1500mg/L C_(14)MC-TA(1:1)reached the optimal depressive effects on the CFPP and SP by 12℃and 18℃.THPA introduction significantly improved the depressive effects of C_(14)MC-TA.Lower dosages of C_(14)MCTA-THPA in diesel exerted better improvement effects on the CFPP and SP than that of C_(14)MC-TA and C_(14)MC-THPA.When the monomer ratio and dosage were 6:0.6:0.4 and 1000 mg/L,the improvement effect of C_(14)MC-TA-THPA on diesel reached the optimum level,and the CFPP and SP were reduced by 13℃and 19℃,respectively.A 3D nonlinear surface diagram fitted by a mathematical model was also used for the first time to better understand the relationships of monomer ratios,dosages,and depressive effects of CFIs in diesel.Surface analysis results showed that C_(14)MC-TA-THPA achieved the optimum depressive effects at a monomer ratio of 6:0.66:0.34 and dosage of 1000 mg/L,and the CFPP and SP decreased by 14℃ and 19℃,respectively.The predicted results were consistent with the actual ones.Additionally,the improvement mechanism of these copolymers in diesel was also explored.
基金financially supported by the National Natural Science Foundation of China(No.52073294)National Key R&D Program of China(No.2021YFB4000700)+1 种基金Project of Stable Support for Youth Team in Basic Research Field of the Chinese Academy of Sciences,China(No.YSBR-017)The authors are highly grateful to Mr.Fan-Ming Zhao for Cryogenic Mechanical Testing.
文摘With the development of electronic technologies,piezoresistive sensors have attracted increasing attention.Among them,aerogels with high elasticity,as a type of three-dimensional porous material,are widely used in the field of piezoresistive sensors.Nowadays,with the extension of science and technology areas,fields involving low-temperature environments have emerged,which has led to an increasing demand for piezoresistive sensors that can serve at cryogenic temperatures.However,most studies on aerogels have only focused on their sensing performance at room temperature,and there is a lack of research on aerogel sensors that can work at low temperatures.In this work,piezoresistive sensors based on cotton fibers were proposed for applications at 77 K.As one of the most important natural polymers,cotton fibers have the ability to maintain elasticity at very low temperatures.Cotton fiber-based aerogels with high elasticity and cyclic stability were obtained by controlling the freeze-casting parameters and size distribution of cotton fibers,and they showed excellent pressure sensing properties,including a wide sensing range and remarkable long-term stability.This study bridges the gap in cryogenic sensing materials and provides insights into microstructure-property relationships,advancing applications in aerospace and cryogenic engineering.
基金financially supported by the National Natural Science Foundation of China(No.22271074)Natural Science Foundation of Hebei Province(Nos.B2023208042,B2022208032,B2021208066,E2024208084,and E2024208088)+2 种基金Science Research Project of Hebei Education Department(No.JZX2024013)Special Fund for Local Scientific and Technological Development under the Guidance of the Central Government(No.236Z3704G)Hebei Province High Level Talent Funding(No.A202001010)。
文摘Owing to their good biocompatibility,polysaccharide hydrogels have broad application prospects in the field of flexible strain sensors.However,there are still significant challenges in the preparation of polysaccharide hydrogels with good mechanical properties.MCA-Li Cl hydrogels were prepared by introducing methacrylated hyaluronic acid(Me HA)into the polymer network in the presence of acrylic acid(AA),acryloyloxyethyltrimethyl ammonium chloride(CATAC),and metal ions.The polymer network not only has a chemically cross-linked network and a tough network structure,but also benefits from a variety of supramolecular interactions,such as hydrogen bonding and coordination covalent bonding,resulting in excellent mechanical properties,with an elongation at break of 1390%,a tensile strength of up to 1200 k Pa,a toughness of 9.4546 MJ/m^(3),and adhesive properties towards various substrates.At the same time,the hydrogel has a high conductivity(5.33 mS/cm)and high strain-sensing sensitivity(Gauge factor=2.55).The flexible strain sensor assembled from the prepared MCA-Li Cl hydrogel can be used to detect human movements,from micro-expressions(smiles,swallowing)to pulse signals and other physiological activities,as well as large-scale joint movements(wrists,elbows,knees,fingers,etc.),realizing the real-time monitoring of full-scale human movements.The prepared hydrogels have potential applications in wearable devices,electronic skin,and strain-sensor components.
基金supported by the Program for National Natural Science Foundation of China(No.11675231)the Sichuan Science and Technology Program(Nos.2022YFG0263 and 2024NSFSC1097)the Scientific Research Starting Foundation for talents(Nos.21zx7109 and 22zx7175,24ycx1005).
文摘Single-crystal GaN epilayers were irradiated with heavy inert gas ions(2.3-MeV Ne^(8+),5.3-MeV Kr^(19+))to fluences ranging from 1.0×1.0^(11) to 1.0×1.0^(15)ions∕cm^(2).The strain-related damage accumulation versus ion fluences was studied using highresolution X-ray diffraction(HRXRD)and ultraviolet–visible(UV–Vis)spectroscopy.The results showed that the damage accumulation was mainly dominated by nuclear energy loss.When the ion fluence was less than∼0.055 displacement per atom(dpa),the lattice expansions and lattice strains markedly increased linearly with increasing ion fluences,accompanied by a slow enhancement in the dislocation densities,distortion parameters,and Urbach energy for both ion irradiations.Above this fluence(∼0.055 dpa),the lattice strains presented a slight increase,whereas a remarkable increase was observed in the dislocation densities,distortion parameters,and Urbach energy with the ion fluences after both ion irradiations.∼0.055 dpa is the threshold ion fluence for defect evolution and lattice damage related to strain.The mechanisms underlying the damage accumulation are discussed in detail.
基金supported by NSFC Grants(Nos.12032004,11872114,and 11502150)Natural Science Foundation of Hebei Province of China(No.A2016210060)+1 种基金The Higher Education Youth Talents Program of Hebei Province of China(No.BJ2017052)Science and Technology Project of Hebei Education Department(No.QN2020204)。
文摘MoTe_(2) has emerged as a promising candidate in the field of integrated circuits,memristive devices,and catalysts,owing to its polymorphic nature across different phases.Experimentally,strain engineering has been demonstrated as an effective approach for manipulating the phase transition of MoTe_(2),but the mechanism remains unclear.The strain-dependent phase transition and its micro-mechanisms have been investigated based on first principle calculations.As demonstrated,critical strain and phase transition path from H→T'phases are strongly governed by the applied strain's orientation,magnitude,and triaxiality.At the atomic level,nonzero movements of Te atoms within the phase transition domain with mechanical unloading have been clarified,together with an advanced understanding on the impact of strain on Te-vacancies migration.These insights advanced the knowledge of MoTe_(2) phase transition behavior and demonstrated the large space to explore potential applications through strain,defect,and phase engineering.
基金financially supported by National Natural Science Foundation of China(52575458,52405424,52275575)Science and Technology Programme of Fujian Province(2024J010011,2024H0002)。
文摘Temperature stability is essential for the precision of flexible sensors.However,constrained by the composite principle of heterogeneous materials,the existing self-compensating methods encounter substantial challenges.To tackle this,high-entropy alloy nanofibers were utilized to construct a flexible strain sensor with inherent temperature stability.This approach leverages the electrohydrodynamic direct writing;a precursor conductive network was established through the electrospinning of a high-entropy alloy acetate and polyvinylidene difluoride solution blend.Subsequently,annealing treatment facilitated metallization,resulting in the synergistic preservation of polymer stretchability and the low temperature coefficient of resistance properties of high-entropy alloys inside the nanofibers.The test results demonstrate that the high-entropy alloys flexible strain sensor exhibits a remarkably low temperature coefficient of resistance(45.59 ppm K^(-1))across the range of-10 to 70℃,a sensitivity coefficient GF of 1.12 with a 50%strain range,and a response time of 310 ms.After 6000 stretching cycles,no baseline drift or failure occurred,indicating excellent cyclic stability.Furthermore,the outstanding temperature stability of the sensor was validated through wearable application and robotic hands strain sensing conducted under varied environment temperatures.This work provides a viable design pathway for developing flexible sensors with an inherently low temperature coefficient of resistance.
基金supported by the National Natural Science Foundation of China through grant numbers 12002245 and 12172263the Science and Technology Research Program of Chongqing Municipal Education Commission through grant number KJQN202300742+1 种基金the National Natural Science Foundation of ChongqingMunicipality through grant number CSTB2025NSCQ-GPX0841Chongqing Jiaotong University through grant number F1220038.
文摘Granular materials exhibit complex macroscopic mechanical behaviors closely related to their microscalemicrostructural features.Traditional macroscopic phenomenological elasto-plastic models,however,usually have complex formulations and lack explicit relations to these microstructural features.To avoid these limitations,this study proposes a micromechanics-based softening hyperelastic model for granular materials,integrating softening hyperelasticity withmicrostructural insights to capture strain softening,critical state,and strain localization behaviors.The model has two key advantages:(1)a clear conceptualization,straightforward formulation,and ease of numerical implementation(via Abaqus UMAT subroutine in this study);(2)explicit incorporation of micro-scale features(e.g.,contact stiffness,particle size,porosity)to reveal their influences on macroscopic responses.An isotropic directional distribution density of contacts and three specific microstructures are considered,and their softening hyperelastic constitutive modulus tensors are explicitly derived.By introducing a softening factor and critical failure energy density,the model can describe geomaterial behaviors,simulating residual strength,X-shaped shear bands,and strain localization evolution.Numerical validations in comparison with themacro-scale hyperelastic model,Abaqus Drucker-Prager model,and the experiment confirm its accuracy.Parametric studies reveal critical dependencies:a normal to tangential contact stiffness ratio of 2-8(depending on stiffness magnitude),an internal length of 2-4 mm to ensure shear band formation,and a critical failure energy density(≤10 kJ/m^(3))to trigger strain softening and localization.Influences of the specific microstructures on strain localization and softening are investigated.The model also shows mesh independence due to the introduction of an internal length.The model’s applicability is further demonstrated by slope stability analysis,capturing slip surface evolution,and load-displacement characteristics.This study develops a robust microstructure-aware hyperelastic framework to describe the mechanical behaviors of granular materials,providing multiscale insights for geotechnical engineering applications.
基金Project supported by the National Key Research and Decelopment Program of China(Grant No.2021YFB3500302)the National Natural Science Foundation of China(Grant Nos.U22A20116 and 52371200)the Innovation Capability Improvement Project of Hebei Province,China(Grant No.22567605H)。
文摘Large magnetic entropy change(△S_(M))can realize a prominent heat transformation under the magnetic field and directly strengthen the efficacy of the magnetocaloric effect,which provides a pioneering environmentally friendly solidstate strategy to improve refrigeration capacities and efficiencies.The second-order magnetic transition(SOMT)materials have broader△S_(M) peaks without thermal hysteresis,making them highly attractive in magnetic refrigeration,especially in the room temperature range.Here,we report a significant enhancement of△S_(M) at room temperature in single-crystal Mn_(5)Ge_(3).In this SOMT system,we realize a 60%improvement of-△S_(M)^(max) from 3.5 J/kg·K to 5.6 J/kg·K at T=300 K.This considerable enhancement of△S_(M) is achieved by intentionally introducing strain energy through high-pressure constrained deformation.Both experimental results and Monte Carlo simulations demonstrate that the enhancement of△S_(M) originates from the microscopic strain and lattice deformation induced by strain energy after deformation.This strain energy will reconstruct the energy landscape of this ferromagnetic system and enhance magnetization,resulting in a giant intensity of magnetocaloric responses.Our findings provide an approach to increase magnetic entropy change and may give fresh ideas for exploring advanced magnetocaloric materials.
基金support from the National Natural Science Foundation of China(Grant No.42407256)the State Key Laboratory of Hydraulics and Mountain River Engineering,China(Grant No.SKHL2113)the Sichuan Science and Technology Program(Grant No.2024YFHZ0341).
文摘This paper develops a semi-analytical solution for pile penetration in natural soft clays using the strain path method(SPM).The stress-strain behavior of soils is characterized by the S-CLAY1S model,which can capture the anisotropic evolution and destructuring nature of soft clays.By integrating the S-CLAY1S model into the theoretical framework of the SPM,a set of ordinary differential equations is formulated with respect to the vertical coordinate of soil particles.The distribution of excess pore water pressure(EPWP)following pile installation is approximated through one-dimensional(1D)radial integration around the pile shaft.The distribution of stresses and EPWP,along with the evolution of fabric anisotropy within the soil surrounding the pile,is presented to illustrate the response of pile penetration in natural soft clays.The proposed solution is validated against existing theoretical solutions using the SPM and cavity expansion method(CEM),along with experimental data.The findings demonstrate that the SPM reveals lower radial effective stresses and EPWP at the pile shaft than that of CEM.Pile penetration alters the soil's anisotropic properties,inducing rotational hardening and affecting post-installation stress distribution.Soil destructuration eliminates bonding among particles near the pile,resulting in a complete disruption of soil structure at the pile surface,which is particularly pronounced for higher initial soil structure ratios.Minimal variation was observed in the three principal stresses and shear stress on the cone side surface as the angle increased from 18°to 60°,except for a slight reduction in EPWP.
基金support of her postdoctoral research at the GFZ Helmholtz Centre for Geosciences.P.Pan acknowledges the financial support of the National Natural Science Foundation of China(Grant No.52339001)H.Hofmann and Y.Ji acknowledge the financial support of the Helmholtz Association's Initiative and Networking Fund for the Helmholtz Young Investigator Group ARES(contract number VH-NG-1516).
文摘A multi-stage stress relaxation test was performed on a granodiorite sample to understand the deformation process prior to the macroscopic failure of brittle rocks,as well as the transient response during stress relaxation.Distributed optical fiber sensing was used to measure strains across the sample surface by helically wrapping the single-mode fiber around the cylindrical sample.Close agreement was observed between the circumferential strains obtained from the optical fibers and the extensometer.The reconstructed full-field strain contours show strain heterogeneity from the crack closure phase,and the strains in the later deformation phase are dominantly localized within the former high-strain zone.The Gini coefficient was used to quantify the degree of strain localization and shows an initial increase during the crack closure phase,a decrease during the linear elastic phase,and a subsequent increase during the post-yielding phase.This behavior corresponds to a process of initial localization from an imperfect boundary condition,homogenization,and eventual relocalization prior to the macroscopic failure of the sample.The transient strain rate decay during the stress relaxation phase was quantified using the p-value in the“Omori-like"power law function.A higher initial stress at the onset of relaxation results in a lower p-value,indicating a slower strain rate decay.As the sample approaches macroscopic failure,the lowest p-value shifts from the most damaged zone to adjacent areas,suggesting stress redistribution or crack propagation in deformed crystalline rocks under stress relaxation conditions.
基金funded by UTM Fundamental Research Grant(PY/2024/01221,Cost centre no.:Q.J130000.3822.23H73)HiCoE Grant Scheme(Cost centre no.:R.J130000.7822.4J738)。
文摘Rapid quantification of seismic-induced damage immediately following an earthquake is critical for determining whether a structure is safe for continued occupation or requires evacuation.This study proposes a novel damage identification method that utilizes limited strain data points,significantly reducing installation,maintenance,and data analysis costs compared to traditional distributed sensor networks.The approach integrates finite element(FE)modeling to generate capacity curves through pushover analysis,incorporates noise-augmented datasets for Artificial Neural Network(ANN)training,and classifies structural conditions into four damage levels:Operational(OP),Immediate Occupancy(IO),Life Safety(LS),and Collapse Prevention(CP).To evaluate the method’s accuracy and efficiency,it was applied to two reinforced concrete(RC)frames;a single-story frame tested experimentally under cyclic loading and a three-story frame analyzed under various lateral load patterns.Strain data from selected beam and column ends were used as ANN inputs,while the corresponding damage classes served as outputs.Confusion matrix results demonstrated high true positive rates(>85%for the single-story and>90%for the three-story frame),even with a reduced number of sensors.The model also exhibited strong robustness to White Gaussian Noise(SNR=2.5-5 dB)and generalized effectively to nonlinear time-history analyses under scaled ground motions(PGA=0.1-1.0 g).Feature selection using the MRMR and ANOVA algorithms further enhanced computational efficiency.Overall,the proposed ANN-based framework has strong potential for real-time structural health monitoring applications.
基金financial support provided by the National Natural Science Foundation of China(Grant No.12302472)the Science and Technology Support Program of Jiangsu Province(Grant No.BK20230874)+2 种基金the Aeronautical Science Fund(ASF)(Grant No.2023Z057052005)the Research Fund of State Key Laboratory of Mechanics and Control for Aerospace Structures(Nanjing University of Aeronautics and Astronautics)(Grant No.MCAS-I-0124G02)the funding received from Jiangsu Hanvo Safety Product Co.,Ltd。
文摘High-performance fiber fabrics and composites experienced transverse compression deformation at ultrahigh strain rates near the impact point when subjected to high-velocity impacts,which significantly affected their ballistic limits.In this paper,a fiber-scale experimental method for characterizing ultrahigh strain-rate transverse compression behavior was proposed.To begin with,in order to measure the extremely low stress and strain in small specimens,the conventional Hopkinson bar was reduced to the hundred-micron scale,thereby achieving wave impedance matching with single fibers.In addition,tangential and normal laser Doppler velocimetry(LDV)methods were employed to realize non-contact,high-precision,and high-speed axial velocity measurements of micron-scale incident and transmission bars,respectively.Meanwhile,a microscopic observation system was used to facilitate the installation of miniature fiber samples.The experimental setup and procedures were introduced,and the system accuracy was verified through sample-free loading tests based on one-dimensional stress wave propagation theory.Dynamic compression experiments on Graphene-UHMWPE fibers were carried out,followed by post-compression microstructural characterization via scanning electron microscopy(SEM).Results demonstrated that successful mechanical characterization was achieved at strain rates exceeding 105,an order of magnitude higher than the previously reported maximum rates.Furthermore,during the loading process,the fibers underwent uniform compression deformation while exhibiting pronounced strain-rate effects.This method offers a novel approach for dynamic mechanical characterization of microscale single fibers,enabling the development of comprehensive strain-ratedependent material models to guide the design of advanced composites and high-performance fibers.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11505003 and 52325103)the Anhui Provincial Natural Science Foundation(Grant No.2108085MA25)。
文摘High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiation resistance.Recent experimental studies have demonstrated that W-Ta-Cr-V alloys exhibit excellent irradiation resistance under helium(He)ion irradiation.However,the underlying mechanisms,especially the migration behavior of He atoms,remain unclear.In this work,the influences of uniaxial tensile and compressive strain on He migration in W-Ta-Cr-V complex alloys have been systematically studied through first-principles calculations.Our results demonstrate that He atoms preferentially occupy the tetrahedral interstitial sites,with interstitial formation energies significantly reduced compared to pure W.The introduction of Ta,Cr,and V alloying elements markedly increases the He migration barriers,effectively suppressing He diffusion.Compressive strain increases the migration barriers,inhibiting He bubbles nucleation and growth,while tensile strain decreases the barriers,facilitating bubble formation.Compared to pure W,the W-Ta-Cr-V alloys exhibit both lower He interstitial formation energies and higher migration barriers,with further enhancement under compressive strain.Specifically,compressive strain of 6%increases the He migration barrier of the W-Ta-Cr-V alloy by 0.166 e V,which further widens the difference relative to pure W.These findings provide a theoretical explanation for the superior irradiation resistance of tungsten-based alloys observed experimentally and promote the understanding of irradiation damage in these alloys under strain.
基金financial support from NSF ExpandQISE program.The synthesis of tellurene was supported by NSF under grant no.CMMI-2046936supports from Purdue Research Foundation.
文摘Tellurene,a chiral chain semiconductor with a narrow bandgap and exceptional strain sensitivity,emerges as a pivotal material for tailoring electronic and optoelectronic properties via strain engineering.This study elucidates the fundamental mechanisms of ultrafast laser shock imprinting(LSI)in two-dimensional tellurium(Te),establishing a direct relationship between strain field orientation,mold topology,and anisotropic structural evolution.This is the first demonstration of ultrafast LSI on chiral chain Te unveiling orientation-sensitive dislocation networks.By applying controlled strain fields parallel or transverse to Te’s helical chains,we uncover two distinct deformation regimes.Strain aligned parallel to the chain’s direction induces gliding and rotation governed by weak interchain interactions,preserving covalent intrachain bonds and vibrational modes.In contrast,transverse strain drives shear-mediated multimodal deformations—tensile stretching,compression,and bending—resulting in significant lattice distortions and electronic property modulation.We discovered the critical role of mold topology on deformation:sharp-edged gratings generate localized shear forces surpassing those from homogeneous strain fields via smooth CD molds,triggering dislocation tangle formation,lattice reorientation,and inhomogeneous plastic deformation.Asymmetrical strain configurations enable localized structural transformations while retaining single-crystal integrity in adjacent regions—a balance essential for functional device integration.These insights position LSI as a precision tool for nanoscale strain engineering,capable of sculpting 2D material morphologies without compromising crystallinity.By bridging ultrafast mechanics with chiral chain material science,this work advances the design of strain-tunable devices for next-generation electronics and optoelectronics,while establishing a universal framework for manipulating anisotropic 2D systems under extreme strain rates.This work discovered crystallographic orientation-dependent deformation mechanisms in 2D Te,linking parallel strain to chain gliding and transverse strain to shear-driven multimodal distortion.It demonstrates mold geometry as a critical lever for strain localization and dislocation dynamics,with sharp-edged gratings enabling unprecedented control over lattice reorientation.Crucially,the identification of strain field conditions that reconcile severe plastic deformation with single-crystal retention offers a pathway to functional nanostructure fabrication,redefining LSI’s potential in ultrafast strain engineering of chiral chain materials.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by the National Key Research and Development Program of China(2023YFD2100104)Henan Provincial Major Science and Technology Special Fund(231100110400).
文摘Microorganisms are crucial for the breakdown of proteins and lipids in dry-fermented sausages and are intimately associated with the flavor profile of sausages.In this study,we used a mixed starter culture to ferment sausages and investigated the flavor turnover.During the fermentation of salami,the data from free amino acids(FAAs),free fatty acids(FFAs)and volatile flavor substances were used to assess the quality of salami.At the end of fermentation,the total FAAs increased from 1171.32 to 4582.48 mg/kg in the control group and 5053.25 mg/kg in the experimental group.Additionally,following inoculation with the mixed starter culture,the levels of glutamic acid,lysine,methionine,valine and leucine were significantly higher(P<0.05)than those in the control group.Oleic acid(C_(18:1))and chondritic acid(C_(16:0))were the two most abundant FFAs in both salami samples with 45.86%and 26.07%on the 23^(th)day in mixed culture inoculated salami.The mixed starter inoculated group had significantly lower saturated fatty acids and higher percentage levels of monounsaturated fatty acids than the control group(P<0.05).In the volatile flavor substance analysis,a total of 61 volatile compounds were found.Ester compounds were progressively enriched with drying time,significantly increasing the flavor substances,like ethyl diphosgene,1-octen-3-ol,and 2,3-butanediol at P<0.05.The correlation analysis between the core flora and volatile flavor compounds during fermentation and maturation of salami indicates Lactobacillus sakei and Lactobacillus rhamnosus were significantly higher and positively correlated with the major volatile organic compounds,which are the key core microorganisms affecting the flavor quality of fermented sausages.
