Coal bed methane has been considered as an important energy resource.One major difficulty of purifying coal bed methane comes from the similar physical properties of CH_4 and N_2.The ZIF-8/water-glycol slurry was used...Coal bed methane has been considered as an important energy resource.One major difficulty of purifying coal bed methane comes from the similar physical properties of CH_4 and N_2.The ZIF-8/water-glycol slurry was used as a medium to separate coal bed methane by fluidifying the solid adsorbent material.The sorption equilibrium experiment of binary mixture(CH_4/N_2)and slurry was conducted.The selectivity of CH_4 to N_2 is within the range of 2-6,which proved the feasibility of the slurry separation method.The modified Langmuir equation was used to describe the gas-slurry phase equilibrium behavior,and the calculated results were in good agreement with the experimental data.A continuous absorption-adsorption and desorption process on the separation of CH_4/N_2 in slurry is proposed and its mathematical model is also developed.Sensitivity analysis is conducted to determine the operation conditions and the energy performance of the proposed process was also evaluated.Feed gas contains 30 mol%of methane and the methane concentration in product gas is 95.46 mol%with the methane recovery ratio of 90.74%.The total energy consumption for per unit volume of product gas is determined as 1.846 kWh Nm^(-3).Experimental results and process simulation provide basic data for the design and operation of pilot and industrial plant.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is...To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is proposed.This process integrates a three-column(crude distillation column,first distillation column,second distillation column)system with a 3A molecular sieve adsorption deep dehydration unit.A thermal coupling network is constructed via differential pressure design(steam from medium/high-pressure columns as mutual heat sources,reboiler liquid waste heat for feed preheating),and molecular sieve adsorption conditions are optimized.The study first performs a thermodynamic consistency test on the ethanol–water system,determines optimal non-random two-liquid(NRTL)model binary interaction parameters via experimental data regression for Aspen Plus simulation.Aiming at minimum total annual cost(TAC),Aspen Plus is used to optimize process parameters(theoretical tray number,feed location,reflux ratio,side-draw position,etc.).Economic analysis shows this process reduces CO_(2) emission costs by 27.56%,TAC by 15.58%(to 5.123×10^(6) USD·a^(−1)),and increases ethanol purity to>99.6%,providing an effective solution for green,efficient separation.展开更多
一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
Graphene,owing to its exceptional electronic,optical,thermal,and mechanical properties,has emerged as a highly promising material.Currently,the synthesis of large-area graphene films on metal substrates via chemical v...Graphene,owing to its exceptional electronic,optical,thermal,and mechanical properties,has emerged as a highly promising material.Currently,the synthesis of large-area graphene films on metal substrates via chemical vapor deposition remains the predominant approach for producing high-quality graphene.To realize the potential applications of graphene,it is essential to transfer graphene films to target substrates in a manner that is non-destructive,clean,and efficient,as this significantly affects the performance of graphene devices.This review examines the current methods for graphene transfer from three perspectives:non-destructive transfer,clean transfer,and high-efficiency transfer.It analyzes and compares the advancements and limitations of various transfer techniques.Finally,the review identifies the key challenges faced by current graphene transfer methods and anticipates future developmental prospects.展开更多
Through literature analysis and case study, the introduction history, variety selection (high bush, half high bush, low bush) and regional cultivation techniques of blueberry in China were summarized, and the practica...Through literature analysis and case study, the introduction history, variety selection (high bush, half high bush, low bush) and regional cultivation techniques of blueberry in China were summarized, and the practical effects of precision cultivation (water and fertilizer integration, wild planting) and under-forest economic model (forest-blueberry-fungus system, ecological tourism) were evaluated. It provided a technical reference for expanding the planting scale of blueberry and improving the fruit quality.展开更多
The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-do...The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-dosage and high-efficiency CFIs for diesel,1,2,3,6-tetrahydrophthalic anhydride(THPA)was introduced as a third and polar monomer to enhance the depressive effects of alkyl methacrylatetrans anethole copolymers(C_(14)MC-TA).The terpolymers of alkyl methacrylate-trans anethole-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-TA-THPA)were synthesized and compared with the binary copolymers of C_(14)MC-TA and alkyl methacrylate-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-THPA).Results showed that C_(14)MC-THPA achieved the best depressive effects on the cold filter plugging point(CFPP)and solid point(SP)by 11℃and 16℃at a dosage of 1250 mg/L and monomer ratio of 6:1,while 1500mg/L C_(14)MC-TA(1:1)reached the optimal depressive effects on the CFPP and SP by 12℃and 18℃.THPA introduction significantly improved the depressive effects of C_(14)MC-TA.Lower dosages of C_(14)MCTA-THPA in diesel exerted better improvement effects on the CFPP and SP than that of C_(14)MC-TA and C_(14)MC-THPA.When the monomer ratio and dosage were 6:0.6:0.4 and 1000 mg/L,the improvement effect of C_(14)MC-TA-THPA on diesel reached the optimum level,and the CFPP and SP were reduced by 13℃and 19℃,respectively.A 3D nonlinear surface diagram fitted by a mathematical model was also used for the first time to better understand the relationships of monomer ratios,dosages,and depressive effects of CFIs in diesel.Surface analysis results showed that C_(14)MC-TA-THPA achieved the optimum depressive effects at a monomer ratio of 6:0.66:0.34 and dosage of 1000 mg/L,and the CFPP and SP decreased by 14℃ and 19℃,respectively.The predicted results were consistent with the actual ones.Additionally,the improvement mechanism of these copolymers in diesel was also explored.展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from...The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).展开更多
Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim ...Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.展开更多
Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durabili...Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.展开更多
Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operato...Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental con...Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.展开更多
This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)sum...This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.展开更多
Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to th...Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.展开更多
Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable pat...Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.展开更多
The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurode...The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.展开更多
基金The financial supports received from the National Natural Science Foundation of China(21522609,21636009 and 21878328)the National Key Research and Development Program of China(Nos.2017YFC0307302,2016YFC0304003)+1 种基金the Science Foundation of China University of Petroleum,Beijing(No.2462018BJC004)Beijing Science and Technology Program,China(No.Z181100005118010)。
文摘Coal bed methane has been considered as an important energy resource.One major difficulty of purifying coal bed methane comes from the similar physical properties of CH_4 and N_2.The ZIF-8/water-glycol slurry was used as a medium to separate coal bed methane by fluidifying the solid adsorbent material.The sorption equilibrium experiment of binary mixture(CH_4/N_2)and slurry was conducted.The selectivity of CH_4 to N_2 is within the range of 2-6,which proved the feasibility of the slurry separation method.The modified Langmuir equation was used to describe the gas-slurry phase equilibrium behavior,and the calculated results were in good agreement with the experimental data.A continuous absorption-adsorption and desorption process on the separation of CH_4/N_2 in slurry is proposed and its mathematical model is also developed.Sensitivity analysis is conducted to determine the operation conditions and the energy performance of the proposed process was also evaluated.Feed gas contains 30 mol%of methane and the methane concentration in product gas is 95.46 mol%with the methane recovery ratio of 90.74%.The total energy consumption for per unit volume of product gas is determined as 1.846 kWh Nm^(-3).Experimental results and process simulation provide basic data for the design and operation of pilot and industrial plant.
基金financially supported by the National Nature Science Foundation of China (62504130)National Key Research and Development Program of China (2018YFB0704100)+3 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong (Y01256331)the Technology Development Project of Henan Province (252102240047)the Pico Center at SUSTech CRF which receives support from the Presidential FundDevelopment and Reform Commission of Shenzhen Municipality
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金support from the National Key Research and Development Program of China(2022YFC2106300)the National Natural Science Foundation of China(42177400).
文摘To address the challenges of high energy consumption and prominent costs in the traditional three-columns distillation process for cellulosic fuel ethanol,a distillation–molecular sieve coupling separation process is proposed.This process integrates a three-column(crude distillation column,first distillation column,second distillation column)system with a 3A molecular sieve adsorption deep dehydration unit.A thermal coupling network is constructed via differential pressure design(steam from medium/high-pressure columns as mutual heat sources,reboiler liquid waste heat for feed preheating),and molecular sieve adsorption conditions are optimized.The study first performs a thermodynamic consistency test on the ethanol–water system,determines optimal non-random two-liquid(NRTL)model binary interaction parameters via experimental data regression for Aspen Plus simulation.Aiming at minimum total annual cost(TAC),Aspen Plus is used to optimize process parameters(theoretical tray number,feed location,reflux ratio,side-draw position,etc.).Economic analysis shows this process reduces CO_(2) emission costs by 27.56%,TAC by 15.58%(to 5.123×10^(6) USD·a^(−1)),and increases ethanol purity to>99.6%,providing an effective solution for green,efficient separation.
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
基金supported by the National Key R&D Program of China(2020YFB2009002).
文摘Graphene,owing to its exceptional electronic,optical,thermal,and mechanical properties,has emerged as a highly promising material.Currently,the synthesis of large-area graphene films on metal substrates via chemical vapor deposition remains the predominant approach for producing high-quality graphene.To realize the potential applications of graphene,it is essential to transfer graphene films to target substrates in a manner that is non-destructive,clean,and efficient,as this significantly affects the performance of graphene devices.This review examines the current methods for graphene transfer from three perspectives:non-destructive transfer,clean transfer,and high-efficiency transfer.It analyzes and compares the advancements and limitations of various transfer techniques.Finally,the review identifies the key challenges faced by current graphene transfer methods and anticipates future developmental prospects.
文摘Through literature analysis and case study, the introduction history, variety selection (high bush, half high bush, low bush) and regional cultivation techniques of blueberry in China were summarized, and the practical effects of precision cultivation (water and fertilizer integration, wild planting) and under-forest economic model (forest-blueberry-fungus system, ecological tourism) were evaluated. It provided a technical reference for expanding the planting scale of blueberry and improving the fruit quality.
基金supported from the Natural Science Foundation Project of Shanghai(Nos.23ZR1425300 and 22ZR1426100)Experimental Technical Team Construction Project of Shanghai Education Commission(No.10110N230080)+1 种基金National Natural Science Foundation of China(No.22075183)Research and Innovation Project of Shanghai Municipal Education Commission(No.2023ZKZD54).
文摘The addition of cold flow improvers(CFIs)is considered as the optimum strategy to improve the cold flow properties(CFPs)of diesel fuels,but this strategy is always limited by the required large dosage.To obtain low-dosage and high-efficiency CFIs for diesel,1,2,3,6-tetrahydrophthalic anhydride(THPA)was introduced as a third and polar monomer to enhance the depressive effects of alkyl methacrylatetrans anethole copolymers(C_(14)MC-TA).The terpolymers of alkyl methacrylate-trans anethole-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-TA-THPA)were synthesized and compared with the binary copolymers of C_(14)MC-TA and alkyl methacrylate-1,2,3,6-tetrahydrophthalic anhydride(C_(14)MC-THPA).Results showed that C_(14)MC-THPA achieved the best depressive effects on the cold filter plugging point(CFPP)and solid point(SP)by 11℃and 16℃at a dosage of 1250 mg/L and monomer ratio of 6:1,while 1500mg/L C_(14)MC-TA(1:1)reached the optimal depressive effects on the CFPP and SP by 12℃and 18℃.THPA introduction significantly improved the depressive effects of C_(14)MC-TA.Lower dosages of C_(14)MCTA-THPA in diesel exerted better improvement effects on the CFPP and SP than that of C_(14)MC-TA and C_(14)MC-THPA.When the monomer ratio and dosage were 6:0.6:0.4 and 1000 mg/L,the improvement effect of C_(14)MC-TA-THPA on diesel reached the optimum level,and the CFPP and SP were reduced by 13℃and 19℃,respectively.A 3D nonlinear surface diagram fitted by a mathematical model was also used for the first time to better understand the relationships of monomer ratios,dosages,and depressive effects of CFIs in diesel.Surface analysis results showed that C_(14)MC-TA-THPA achieved the optimum depressive effects at a monomer ratio of 6:0.66:0.34 and dosage of 1000 mg/L,and the CFPP and SP decreased by 14℃ and 19℃,respectively.The predicted results were consistent with the actual ones.Additionally,the improvement mechanism of these copolymers in diesel was also explored.
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of significant,novel,and high-impact research in the fields of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金Sichuan Science and Technology Program(2025ZNSFSC1341)Fundamental Research Funds for the Central Universities(J2022-090,25CAFUC04087)。
文摘The hot compression deformation behavior of Mg-6Zn-1Mn-0.5Ca(ZM61-0.5Ca)and Mg-6Zn-1Mn-2Sn-0.5Ca(ZMT612-0.5Ca)alloys was investigated at deformation temperatures ranging from 250℃to 400℃and strain rates varying from 0.001 s^(-1) to 1 s^(-1).The results show that the addition of Sn promotes dynamic recrystallization(DRX),and CaMgSn phases can act as nucleation sites during the compression deformation.Flow stress increases with increasing the strain rate and decreasing the temperature.Both the ZM61-0.5Ca and ZMT612-0.5Ca alloys exhibit obvious DRX characteristics.CaMgSn phases can effectively inhibit dislocation motion with the addition of Sn,thus increasing the peak fl ow stress of the alloy.The addition of Sn increases the hot deformation activation energy of the ZM61-0.5Ca alloy from 199.654 kJ/mol to 276.649 kJ/mol,thus improving the thermal stability of the alloy.For the ZMT612-0.5Ca alloy,the optimal hot deformation parameters are determined to be a deformation temperature range of 350–400℃and a strain rate range of 0.001–0.01 s^(-1).
文摘Agricultural Products Processing and Storage(ISSN 3059-4510,Owner:Hunan Academy of Agricultural Sciences,China.Production and hosting:Springer Nature)is an international,peer-reviewed open access journal with the aim to offer a platform for the rapid dissemination of signifi cant,novel,and high-impact research in the fi elds of agricultural product processing science,technology,engineering,and nutrition.Additionally,supplemental issues are curated and published to facilitate in-depth discussions on special topics.
基金National MCF Energy R&D Program(2024YFE03260300)。
文摘Refractory metals,including tungsten(W),tantalum(Ta),molybdenum(Mo),and niobium(Nb),play a vital role in industries,such as nuclear energy and aerospace,owing to their exceptional melting temperatures,thermal durability,and corrosion resistance.These metals have body-centered cubic crystal structure,characterized by limited slip systems and impeded dislocation motion,resulting in significant low-temperature brittleness,which poses challenges for the conventional processing.Additive manufacturing technique provides an innovative approach,enabling the production of intricate parts without molds,which significantly improves the efficiency of material usage.This review provides a comprehensive overview of the advancements in additive manufacturing techniques for the production of refractory metals,such as W,Ta,Mo,and Nb,particularly the laser powder bed fusion.In this review,the influence mechanisms of key process parameters(laser power,scan strategy,and powder characteristics)on the evolution of material microstructure,the formation of metallurgical defects,and mechanical properties were discussed.Generally,optimizing powder characteristics,such as sphericity,implementing substrate preheating,and formulating alloying strategies can significantly improve the densification and crack resistance of manufactured parts.Meanwhile,strictly controlling the oxygen impurity content and optimizing the energy density input are also the key factors to achieve the simultaneous improvement in strength and ductility of refractory metals.Although additive manufacturing technique provides an innovative solution for processing refractory metals,critical issues,such as residual stress control,microstructure and performance anisotropy,and process stability,still need to be addressed.This review not only provides a theoretical basis for the additive manufacturing of high-performance refractory metals,but also proposes forward-looking directions for their industrial application.
基金support of the“Pioneer”and“Leading Goose”Research&Development Program of Zhejiang(2024C01028)the State Key Laboratory of Industrial Control Technology,China(ICT2024C04)are gratefully acknowledged.
文摘Digital twin technology brings more opportunities and challenges to chemical engineering in both academic and industry.A complex process could have multiple digitalization needs,including simulation,monitoring,operator training,etc.;thus,a hierarchical digital twin would be a comprehensive solution to that.In this study,a novel and general framework of the digital twin is proposed for operations in process industry.With the hierarchical structure,the framework can handle various tasks driven by different roles in process industry,including managers,engineers,and operators.To complete these tasks,the framework consists of three modules:OAS(Operation Analysis System),OMS(Operation Monitoring System),and OTS(Operator Training System).Each module focuses on one unique type of demand from the staff,as well as interactions among them enabling efficient data sharing.Based on the hierarchical framework,a digital twin system is applied for one complex industrial nitration process,which successfully enhances the operation efficiency and safety in several industrial scenarios with different demands.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
文摘Processes supported by process-aware information systems are subject to continuous and often subtle changes due to evolving operational,organizational,or regulatory factors.These changes,referred to as incremental concept drift,gradually alter the behavior or structure of processes,making their detection and localization a challenging task.Traditional process mining techniques frequently assume process stationarity and are limited in their ability to detect such drift,particularly from a control-flow perspective.The objective of this research is to develop an interpretable and robust framework capable of detecting and localizing incremental concept drift in event logs,with a specific emphasis on the structural evolution of control-flow semantics in processes.We propose DriftXMiner,a control-flow-aware hybrid framework that combines statistical,machine learning,and process model analysis techniques.The approach comprises three key components:(1)Cumulative Drift Scanner that tracks directional statistical deviations to detect early drift signals;(2)a Temporal Clustering and Drift-Aware Forest Ensemble(DAFE)to capture distributional and classification-level changes in process behavior;and(3)Petri net-based process model reconstruction,which enables the precise localization of structural drift using transition deviation metrics and replay fitness scores.Experimental validation on the BPI Challenge 2017 event log demonstrates that DriftXMiner effectively identifies and localizes gradual and incremental process drift over time.The framework achieves a detection accuracy of 92.5%,a localization precision of 90.3%,and an F1-score of 0.91,outperforming competitive baselines such as CUSUM+Histograms and ADWIN+Alpha Miner.Visual analyses further confirm that identified drift points align with transitions in control-flow models and behavioral cluster structures.DriftXMiner offers a novel and interpretable solution for incremental concept drift detection and localization in dynamic,process-aware systems.By integrating statistical signal accumulation,temporal behavior profiling,and structural process mining,the framework enables finegrained drift explanation and supports adaptive process intelligence in evolving environments.Its modular architecture supports extension to streaming data and real-time monitoring contexts.
文摘This study investigated the effects of xu-argument-based continuation writing on learners’processing of source texts.Seventy-five participants were randomly assigned to three conditions:(1)continuation writing,(2)summary writing,or(3)reading comprehension.Eye-tracking data were collected during reading,measuring early(first fixation duration,first pass duration)and late(go-past time,total fixation duration)eye movements.During writing,source-text rereading was tracked via fixation counts and durations.Results showed that task type did not affect initial lexical access,as first fixation duration showed no group differences.However,both production groups exhibited significantly longer first pass durations than the reading comprehension group.Late measures revealed a gradient pattern:the continuation writing group spent significantly longer gopast time and total fixation duration than the summary writing group,which exceeded the reading comprehension group.This indicates that continuation tasks promoted deeper cognitive engagement during reading.During writing,the continuation writing group spent more time rereading the source text with higher fixation counts than the summary writing group.These findings suggest that continuation writing triggers more intensive reader-text interaction during pre-writing and enhances comprehension-production coupling through sustained attention to input during writing.This study sheds light on the cognitive mechanisms underlying the theoretical and pedagogical value of xu-argument.
基金supported by the Foundation of National Dairy Technology Innovation Center(2022-Open Funding Project-12)Foundation of National Dairy Technology Innovation Center(2022-Scientific Research-9)+2 种基金Key Project of National Dairy Innovation Research Center of Inner Mongolia(2021-National Dairy Innovation Research Center-8)Key Projects of Research Operating Expenses of Provincial Research Institutes in Heilongjiang Province(CZKYF2021-2-B017)Key Project of Natural Science Foundation of Heilongjiang Province(ZD2022C007).
文摘Suancai has a lengthy history and a wide range of categories,which has some influence on the pickled diet culture around the world.Suancai production is transitioning to a large-scale,standardized production due to the growth of the market.It has a unique flavor and is rich in nutrients,and its abundance of free amino acids,vitamins and phenolics has many positive effects on the human body.This review gives the types and history of suancai,as well as its impact on the world’s pickled culture.The changes in nutritional composition and flavor of suancai during fermentation are summarized.It presented the production technology and influencing factors of the northeast suancai,examined the quality and safety issues in suancai,and put forth some ideas and opinions on the standardization development of the suancai industry.It also summarized the geographic distribution and flora diversity of pickles around the world.In order to provide some knowledge and guidance for the promotion of modern industrial production in the suancai industry.
基金supported by the National Key Research and Development Program of ChinaNational Natural Science Foundation of China(NSFC)Jilin Province Science and Technology Development Plan Project under Grants 2020YFA0715000,62075081,and 20220402011GH。
文摘Laser micro-nano processing technologies have been developed to address challenges that are otherwise difficult to solve in industrial applications and diverse scientific fields.These technologies offer designable patterning,arraying capabilities,three-dimensional(3D)processing,and high precision.Recent advancements in laser technologies have demonstrated their effectiveness as powerful tools for micro-nano processing of optoelectronic materials.By utilizing various laser techniques—such as laser-induced polymerization,laser ablation,laser-induced transfer,laser-directed assembly,and laser-assisted crystallization—broad applications in image sensors,displays,solar cells,lasers,anti-counterfeiting,and information encryption have been enabled.This review comprehensively summarizes recent progress in the laser micro-nano processing of optoelectronic materials,including the technologies used for preparation,patterning,arraying,and modification.These laser fabrication methods uniquely provide capabilities such as annealing,phase transitions,and ion exchange in optoelectronic materials.We also discuss the perspectives and challenges for future developments,including the advantages,disadvantages,and potential applications of different laser micro-nano processing technologies.With the rapid advancements in laser micro-nanofabrication,we foresee significant growth in advanced,high-performance optoelectronic applications.This review aims to provide researchers with insights into the current state and future prospects of laser-based micro-nano processing,encouraging further exploration and innovation in this promising field.
文摘The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.
