Osmotic energy,existing between the seawater and river water,is a renewable energy source,which can be directly converted into electricity by ion-exchange membranes(IEM).In traditional IEMs,the ion transport channels ...Osmotic energy,existing between the seawater and river water,is a renewable energy source,which can be directly converted into electricity by ion-exchange membranes(IEM).In traditional IEMs,the ion transport channels are formed by nanophase separation of hydrophilic ion carriers and hydrophobic segments.It is difficult to realize high-density ion channels with controlled spatial arrangement and length scale of ion carriers.Herein,we construct high-density 1D ion wires as transmission channels.Through molecular design,hydrophilic imidazole groups and hydrophobic alkyl tails were introduced into the repeat units,which self-assembled into 1D ion transporting core and protecting shell along the main chains.The areal density of the ionic wire arrays is up to~10^(12)cm^(-2),which is the highest value.The ionic wires ensure both high ion flux transport and high selectivity,achieving an ultrahigh-power density of 40.5 W m^(-2)at a 500-fold salinity gradient.Besides,the ionic wire array membrane is well recyclable and antibacterial.The ionic wires provide novel concept for next generation of high-performance membranes.展开更多
Metal-support interactions and hydrogen spillover effects in heterogeneous catalysts play a crucial role in aromatic hydrogenation reactions;however,these effects are limited by the metal dispersion on the catalyst an...Metal-support interactions and hydrogen spillover effects in heterogeneous catalysts play a crucial role in aromatic hydrogenation reactions;however,these effects are limited by the metal dispersion on the catalyst and the number of acceptable H*receptors.This study prepares highly dispersed Ni nanoparticles(NPs)catalysts on a Beta substrate via precursor structure topology transformation.In contrast to traditional support materials,the coordination and electronic structure changes between the Ni NPs and the support were achieved,further optimizing the active interface sites and enhancing hydrogen activation and hydrogenation performance.Additionally,the-OH groups at the strong acid sites in zeolite effectively intensified the hydrogen spillover effect as receptors for H^(*)migration and anchoring,accelerating the hydrogenation rate of aromatic rings.Under solvent-free conditions,this catalyst was used for the hydrogenation reaction of aromatic-rich oils,directly producing a C_(8)-C_(14)branched cycloalkanes mixture with an aromatic conversion rate of>99%.The cycloalkanes mixture produced by this method features high density(0.92 g/mL)and a low freezing point(<-60℃),making it suitable for use as high-density aviation fuel or as an additive to enhance the volumetric heat value of conventional aviation fuels in practical applications.展开更多
In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative ro...In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative rotary shear system(RSS)to address these deficiencies through controlled mandrel rotation and cooling rates.We successfully prepared self-reinforced HDPE pipes with a three-layer structure combining spherical and shish-kebab crystals.Rotational processing aligned the molecular chains in the ring direction and formed shish-kebab crystals.As a result,the annular tensile strength of the rotationally processed three-layer shish-kebab structure(TSK)pipe increased from 26.7 MPa to 76.3 MPa,an enhancement of 185.8%.Notably,while maintaining excellent tensile strength(73.4 MPa),the elongation at break of the spherulite shishkebab spherulite(SKS)tubes was improved to 50.1%,as compared to 33.8%in the case of shish-kebab spherulite shish-kebab(KSK)tubes.This improvement can be attributed to the changes in the micro-morphology and polymer structure within the SKS tubes,specifically due to the formation of small-sized shish-kebab crystals and the low degrees of interlocking.In addition,2D-SAXS analysis revealed that KSK tubes have higher tensile strength due to smaller crystal sizes and larger shish dimensions,forming dense interlocking structures.In contrast,the SKS and TSK tubes had thicker amorphous regions and smaller shish sizes,resulting in reduced interlocking and mechanical performance.展开更多
Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfil...Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfill soil,predominantly composed of silty clay,demonstrates high water retention capacity and elevated moisture content,leading to a pronounced resistivity contrast with the bedrock exposed by quarrying activities.To investigate the distribution of backfill soil subsurface and assess backfilling effectiveness in the study area,this study conducted a comprehensive geophysical investigation utilizing the high-density electrical resistivity tomography(ERT).A total of 19 ERT survey lines were deployed across three distinct areas in Liuyao Village,Huaibei City,Anhui Province,China.The inversion results,derived from both two-dimensional(2D)and three-dimensional(3D),reveal distinct electrical properties of the subsurface materials:the backfill soil layer shows low resistivity features,the fill stone layer exhibits medium to high resistivity,and the bedrock shows the highest resistivity.The 2D inversion results,from the data measured using the Wenner array effectively capture the spatial distribution and structural features of the backfill soil layer.The findings indicate a gradual east-west thinning of the clay layer within the quarry.Furthermore,the northern pit area exhibits a uniform distribution of backfill soil layer,indicative of effective backfilling operations.In contrast,the southern pit area lacks a well-defined clay layer,suggesting suboptimal backfilling effectiveness.展开更多
High-density interconnect(HDI)soft electronics that can integrate multiple individual functions into one miniaturized monolithic system is promising for applications related to smart healthcare,soft robotics,and human...High-density interconnect(HDI)soft electronics that can integrate multiple individual functions into one miniaturized monolithic system is promising for applications related to smart healthcare,soft robotics,and human-machine interactions.However,despite the recent advances,the development of three-dimensional(3D)soft electronics with both high resolution and high integration is still challenging because of the lack of efficient manufacturing methods to guarantee interlayer alignment of the high-density vias and reliable interlayer electrical conductivity.Here,an advanced 3D laser printing pathway,based on femtosecond laser direct writing(FLDW),is demonstrated for preparing liquid metal(LM)-based any layer HDI soft electronics.FLDW technology,with the characteristics of high spatial resolution and high precision,allows the maskless fabrication of high-resolution embedded LM microchannels and high-density vertical interconnect accesses for 3D integrated circuits.High-aspect-ratio blind/through LM microstructures are formed inside the elastomer due to the supermetalphobicity induced during laser ablation.The LM-based HDI circuit featuring high resolution(~1.5μm)and high integration(10-layer electrical interconnection)is achieved for customized soft electronics,including various customized multilayer passive electric components,soft multilayer circuit,and cross-scale multimode sensors.The 3D laser printing method provides a versatile approach for developing chip-level soft electronics.展开更多
Dislocation strengthening,as one of the methods to simultaneously enhance the room temperature strength and ductility of alloys,does not achieve the desired strengthening and plasticity effect during elevated-temperat...Dislocation strengthening,as one of the methods to simultaneously enhance the room temperature strength and ductility of alloys,does not achieve the desired strengthening and plasticity effect during elevated-temperature deformation.Here,we report a novel strategy to boost the dislocation multiplication and accumulation during deformation at elevated temperatures through dynamic strain aging(DSA).With the introduction of the rare-earth element Ho in Mg-Y-Zn alloy,Ho atoms diffuse toward dislocations during deformation at elevated temperatures,provoking the DSA effect,which increases the dislocation density significantly via the interactions of mobile dislocations and Ho atoms.The resulting alloy achieves a great enhancement of dislocation hardening and obtains the dual benefits of high strength and good ductility simultaneously at high homologous temperatures.The present work provides an effective strategy to enhancing the strength and ductility for elevated-temperature materials.展开更多
In the context of rapid urbanization,high-density construction areas face significant challenges,including the reduction of ecological spaces and the deterioration of their functions.Planning and managing ecological s...In the context of rapid urbanization,high-density construction areas face significant challenges,including the reduction of ecological spaces and the deterioration of their functions.Planning and managing ecological spaces have emerged as essential strategies to address the conflict between urban development and ecological conservation.Using Jinjiang City,Fujian Province as the case study,this paper systematically examines the significance and primary challenges of ecological space planning in highdensity construction areas.It also identifies prevailing issues within the current research domain,including“an overemphasis on top-level design at the expense of implementation,a focus on isolated aspects rather than systemic integration,and prioritization of control over coordination”.This study proposes the key aspects of ecological space planning and management in high-density construction areas,focusing on three fundamental dimensions:human-centered demand orientation,the integration of top-down and bottomup linkage mechanisms,and a differentiated control system.Drawing on the full-element assessment of the ecosystem,ecological network construction,and full-process control system implemented in Jinjiang City,an integrated approach to ecological space governance,encompassing assessment,planning,and control,has been developed.This approach offers both theoretical insights and practical guidance for optimizing ecological spaces in comparable urban contexts.展开更多
BACKGROUND The association between the uric acid-to-high-density lipoprotein cholesterol ratio(UHR)and mental health among individuals with type 2 diabetes mellitus(T2DM)has not been thoroughly investigated.AIM To exa...BACKGROUND The association between the uric acid-to-high-density lipoprotein cholesterol ratio(UHR)and mental health among individuals with type 2 diabetes mellitus(T2DM)has not been thoroughly investigated.AIM To examine the link between UHR and symptoms of depression and anxiety in patients with T2DM.METHODS A cross-sectional analysis was carried out from March 2023 to April 2024,involving participants diagnosed with T2DM.Data on sociodemographic characteristics,clinical parameters,and UHR values were systematically gathered.The Self-Rating Depression Scale(SDS)and Self-Rating Anxiety Scale(SAS)were utilized to evaluate depressive and anxiety symptoms,respectively.To assess the relationships between UHR and SDS/SAS scores,linear regression models were employed,incorporating adjustments for potential confounding variables.Additionally,smooth curve fitting and threshold effect analyses were conducted to explore potential nonlinear relationships.RESULTS A total of 285 patients with T2DM were included.Initial univariate analysis demonstrated a significant positive correlation between elevated UHR levels and higher SDS and SAS scores.Multivariate regression analysis revealed that a one-unit rise in UHR was associated with a 1.13-point increase in SDS scores(95%CI:0.69-1.58)and a 0.57-point increase in SAS scores(95%CI:0.20-0.93).After controlling for confounders,UHR remained positively correlated with SDS(β=1.55,95%CI:0.57-2.53)and SAS(β=0.72,95%CI:0.35-1.09).Nonlinear analysis identified critical thresholds at UHR values of 5.02 for SDS and 4.00 for SAS,beyond which the relationships between UHR and psychological symptom scores became markedly stronger(P<0.05).CONCLUSION Higher UHR levels are significantly linked to exacerbated depressive and anxiety symptoms in patients with T2DM.These results indicate that UHR may function as a promising biomarker to identify individuals at greater risk of mental health complications within this population.展开更多
Rapeseed mustard(Brassica juncea L.) is the third most important oilseed crop in the world, but the geneticmechanism underlying its massive phenotypic variation remains largely unexplored. In this study, specific leng...Rapeseed mustard(Brassica juncea L.) is the third most important oilseed crop in the world, but the geneticmechanism underlying its massive phenotypic variation remains largely unexplored. In this study, specific length amplified fragment sequencing(SLAF-Seq) was used to resequence a population comprising 197 F8recombinantinbred lines(RILs) derived from a cross between vegetable-type Qichi881 and oilseed-type YufengZC of B. juncea. In total, 438,895 high-quality SLAFs were discovered, 47,644 of which were polymorphic, and 3,887 of the polymorphic markers met the requirements for genetic map construction. The final map included 3,887 markers on 18 linkage groups and was 1,830.23 centiMorgan(cM) in length, with an average distance of 0.47 cM between adjacent markers. Using the newly constructed high-density genetic map, a total of 53 QTLs for erucicacid(EA), oleic acid(OA), and linolenic acid(LNA) were detected and integrated into eight consensus QTLswith two for each of these traits. For each of these three traits, two candidate genes were cloned and sequence analysis indicated colocalization with their respective consensus QTLs. The co-dominant allele-specific markers for Bju.FAD3.A03 and Bju.FAD3.B07 were developed and showed co-localization with their consensus QTLs andco-segregation with LNA content, further supporting the results of QTL mapping and bioinformatic analysis. Theexpression levels of the cloned homologous genes were also determined, and the genes were tightly correlatedwith the EA, OA and LNA contents of different lines. The results of this study will facilitate the improvement offatty acid traits and molecular breeding of B. juncea. Further uses of the high-density genetic map created in this study are also discussed.展开更多
Stroke survivors often face significant challenges when performing daily self-care activities due to upper limb motor impairments.Traditional surface electromyography(sEMG)analysis typically focuses on isolated hand p...Stroke survivors often face significant challenges when performing daily self-care activities due to upper limb motor impairments.Traditional surface electromyography(sEMG)analysis typically focuses on isolated hand postures,overlooking the complexity of object-interactive behaviors that are crucial for promoting patient independence.This study introduces a novel framework that combines high-density sEMG(HD-sEMG)signals with an improved Whale Optimization Algorithm(IWOA)-optimized Long Short-Term Memory(LSTM)network to address this limitation.The key contributions of this work include:(1)the creation of a specialized HD-sEMG dataset that captures nine continuous self-care behaviors,along with time and posture markers,to better reflect real-world patient interactions;(2)the development of a multi-channel feature fusion module based on Pascal’s theorem,which enables efficient signal segmentation and spatial–temporal feature extraction;and(3)the enhancement of the IWOA algorithm,which integrates optimal point set initialization,a diversity-driven pooling mechanism,and cosine-based differential evolution to optimize LSTM hyperparameters,thereby improving convergence and global search capabilities.Experimental results demonstrate superior performance,achieving 99.58%accuracy in self-care behavior recognition and 86.19%accuracy for 17 continuous gestures on the Ninapro db2 benchmark.The framework operates with low latency,meeting the real-time requirements for assistive devices.By enabling precise,context-aware recognition of daily activities,this work advances personalized rehabilitation technologies,empowering stroke patients to regain autonomy in self-care tasks.The proposed methodology offers a robust,scalable solution for clinical applications,bridging the gap between laboratory-based gesture recognition and practical,patient-centered care.展开更多
Space-Based Solar Power(SBSP) presents a promising solution for achieving carbon neutrality and Renewable Electricity 100%(RE100) goals by offering a stable and continuous energy supply. However, its commercialization...Space-Based Solar Power(SBSP) presents a promising solution for achieving carbon neutrality and Renewable Electricity 100%(RE100) goals by offering a stable and continuous energy supply. However, its commercialization faces significant obstacles due to the technical challenges of long-distance microwave Wireless Power Transmission(WPT) from geostationary orbit. Even ground-based kilometer-scale WPT experiments remain difficult because of limited testing infrastructure, high costs, and strict electromagnetic wave regulations. Since the 1975 NASA-Raytheon experiment, which successfully recovered 30 kW of power over 1.55 km, there has been little progress in extending the transmission distance or increasing the retrieved power. This study proposes a cost-effective methodology for conducting long-range WPT experiments in constrained environments by utilizing existing infrastructure. A deep space antenna operating at 2.08 GHz with an output power of 2.3 kW and a gain of 55.3 dBi was used as the transmitter. Two test configurations were implemented: a 1.81 km ground-to-air test using an aerostat to elevate the receiver and a 1.82 km ground-to-ground test using a ladder truck positioned on a plateau. The rectenna consists of a lightweight 3×3 patch antenna array(0.9 m × 0.9 m), accompanied by a steering device and LED indicators to verify power reception. The aerostat-based test achieved a power density of 154.6 mW/m2, which corresponds to approximately 6.2% of the theoretical maximum. The performance gap is primarily attributed to near-field interference, detuning of the patch antenna, rectifier mismatch, and alignment issues. These limitations are expected to be mitigated through improved patch antenna fabrication, a transition from GaN to GaAs rectifiers optimized for lower input power, and the implementation of an automated alignment system. With these enhancements, the recovered power is expected to improve by approximately four to five times. The results demonstrate a practical and scalable framework for long-range WPT experiments under constrained conditions and provide key insights for advancing SBSP technology.展开更多
Founded in September 2020,the International SparkLink Alliance(iSLA)now has approximately 1,200 members in diverse sectors including terminals,homes,vehicles,manufacturing,transportation,finance and healthcare.The iSL...Founded in September 2020,the International SparkLink Alliance(iSLA)now has approximately 1,200 members in diverse sectors including terminals,homes,vehicles,manufacturing,transportation,finance and healthcare.The iSLA has established a technical standards system for wireless short-range communication covering full-stack standards such as the end-to-end protocol system.展开更多
Wi-Fi technology has evolved significantly since its introduction in 1997,advancing to Wi-Fi 6 as the latest standard,with Wi-Fi 7 currently under development.Despite these advancements,integrating machine learning in...Wi-Fi technology has evolved significantly since its introduction in 1997,advancing to Wi-Fi 6 as the latest standard,with Wi-Fi 7 currently under development.Despite these advancements,integrating machine learning into Wi-Fi networks remains challenging,especially in decentralized environments with multiple access points(mAPs).This paper is a short review that summarizes the potential applications of federated reinforcement learning(FRL)across eight key areas of Wi-Fi functionality,including channel access,link adaptation,beamforming,multi-user transmissions,channel bonding,multi-link operation,spatial reuse,and multi-basic servic set(multi-BSS)coordination.FRL is highlighted as a promising framework for enabling decentralized training and decision-making while preserving data privacy.To illustrate its role in practice,we present a case study on link activation in a multi-link operation(MLO)environment with multiple APs.Through theoretical discussion and simulation results,the study demonstrates how FRL can improve performance and reliability,paving the way for more adaptive and collaborative Wi-Fi networks in the era of Wi-Fi 7 and beyond.展开更多
In the wireless energy transmission service composition optimization problem,a key challenge is accurately capturing users’preferences for service criteria under complex influencing factors,and optimally selecting a ...In the wireless energy transmission service composition optimization problem,a key challenge is accurately capturing users’preferences for service criteria under complex influencing factors,and optimally selecting a composition solution under their budget constraints.Existing studies typically evaluate satisfaction solely based on energy transmission capacity,while overlooking critical factors such as price and trustworthiness of the provider,leading to a mismatch between optimization outcomes and user needs.To address this gap,we construct a user satisfaction evaluation model for multi-user and multi-provider scenarios,systematically incorporating service price,transmission capacity,and trustworthiness into the satisfaction assessment framework.Furthermore,we propose a Budget-Aware Preference Adjustment Model that predicts users’baseline preference weights from historical data and dynamically adjusts them according to budget levels,thereby reflecting user preferences more realistically under varying budget constraints.In addition,to tackle the composition optimization problem,we develop a ReflectiveEvolutionary Large Language Model—Guided Ant Colony Optimization algorithm,which leverages the reflective evolution capability of large language models to iteratively generate and refine heuristic information that guides the search process.Experimental results demonstrate that the proposed framework effectively integrates personalized preferences with budget sensitivity,accurately predicts users’preferences,and significantly enhances their satisfaction under complex constraints.展开更多
This paper studies wireless vehicular communication(VehCom)in intelligent transportation systems using an orthogonal frequency division multiplexing with index modulation(OFDM-IM).In the concept of IM,data is transmit...This paper studies wireless vehicular communication(VehCom)in intelligent transportation systems using an orthogonal frequency division multiplexing with index modulation(OFDM-IM).In the concept of IM,data is transmitted not only through the modulated symbols but also via the indices of the active subcarriers.In contrast to the original OFDM,OFDM-IM activates only non-zero subcarriers,increasing energy efficiency.However,the pilotassisted channel estimation(CE)method is a significant challenge in OFDM-IM,where the desired pilot subcarrier interval is related to the OFDM-IM subblock length.This paper proposes a walsh-scattered pilot-assisted CE for OFDM-IM VehCom.The optimum walsh-scattered pilot assignment is proposed to improve the transmission efficiency.Furthermore,a space-time block code with a high transmit diversity gain is employed for OFDM-IM VehCom to enhance VehCom's signal quality.The results show that the proposed method performs higher CE accuracy and better bit-error rate with significant spectral and energy efficiencies than conventional methods.展开更多
The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy ...The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy and effect can not meet the precise requirement of the inversion. Two typical models of the geological bodies were designed, and forward calculation was carried out using finite element method. The forward-modeled profiles were obtained. 1% Gaussian random error was added in the forward models and then 2D and 3D inversions using a high-density resistivity method were undertaken to realistically simulate field data and analyze the sensitivity of the 2D and 3D inversion algorithms to noise. Contrast between the 2D and 3D inversion results of least squares inversion shows that two inversion results of high-density resistivity method all can basically reflect the spatial position of an anomalous body. However, the 3D inversion can more effectively eliminate the influence of interference from Gaussian random error and better reflect the distribution of resistivity in the anomalous bodies. Overall, the 3D inversion was better than 2D inversion in terms of embodying anomalous body positions, morphology and resistivity properties.展开更多
Various previous studies have found a negative cor-relation between the risk of cardiovascular events and serum high-density lipoprotein(HDL) cholesterol levels. The reverse cholesterol transport, a pathway of choles-...Various previous studies have found a negative cor-relation between the risk of cardiovascular events and serum high-density lipoprotein(HDL) cholesterol levels. The reverse cholesterol transport, a pathway of choles-terol from peripheral tissue to liver which has several potent antiatherogenic properties. For instance, the particles of HDL mediate to transport cholesterol from cells in arterial tissues, particularly from atherosclerotic plaques, to the liver. Both ATP-binding cassette trans-porters(ABC) A1 and ABCG1 are membrane cholesterol transporters and have been implicated in mediating cholesterol effluxes from cells in the presence of HDL and apolipoprotein A-I, a major protein constituent of HDL. Previous studies demonstrated that ABCA1 and ABCG1 or the interaction between ABCA1 and ABCG1 exerted antiatherosclerotic effects. As a therapeutic approach for increasing HDL cholesterol levels, much focus has been placed on increasing HDL cholesterol levels as well as enhancing HDL biochemical functions. HDL therapies that use injections of reconstituted HDL, apoA-I mimetics, or full-length apoA-I have shown dramatic effectiveness. In particular, a novel apoA-I mi-metic peptide, Fukuoka University ApoA-I Mimetic Pep-tide, effectively removes cholesterol via specific ABCA1 and other transporters, such as ABCG1, and has an an-tiatherosclerotic effect by enhancing the biological func-tions of HDL without changing circulating HDL choles-terol levels. Thus, HDL-targeting therapy has significant atheroprotective potential, as it uses lipid transporter-targeting agents, and may prove to be a therapeutic tool for atherosclerotic cardiovascular diseases.展开更多
Synthesizing high-density fuel from lignocellulose can not only achieve green and low-carbon development,but also expand the feedstock source of hydrocarbon fuel.Here,we reported a route of producing high-density fuel...Synthesizing high-density fuel from lignocellulose can not only achieve green and low-carbon development,but also expand the feedstock source of hydrocarbon fuel.Here,we reported a route of producing high-density fuel from lignin oil and hemicellulose derivative cyclopentanol through alkylation and hydrodeoxygenation,HY with SiO_(2)/Al_(2)O_(3) molar ratio of 5.3 was screened as the alkylation catalyst in the reaction of model phenolic compounds and mixtures,and the reaction conditions were optimized to achieve conversion of phenolic compounds higher than 87%and selectivity of bicyclic and tricyclic products higher than 99%.Then two phenolic pools simulating the composition of two typic lignin oils were studied to validate the alkylation and analyze the competition mechanism of phenolic compounds in mixture system.Finally,real lignin oil from depolymerized of beech powder was tested,and notably80%of phenolic monomers in the oil were converted into fuel precursor.After hydrodeoxygenation,the alkylated product was converted to fuel blend with a density of 0.91 g/mL at 20℃and a freezing point lower than-60℃,very promising as high density fuel.This work provides a facile and energyefficient way of synthesizing high-performance jet fuel directly from lignocellulosic derivatives,which decreases processing energy consumption and improve the utilization rate of feedstock.展开更多
BACKGROUND:An increase in high-density lipoprotein(HDL)is well associated with a decreased cardiovascular risk,especially atherosclerosis.Recent studies suggest that lower levels of HDL may also be associated with an ...BACKGROUND:An increase in high-density lipoprotein(HDL)is well associated with a decreased cardiovascular risk,especially atherosclerosis.Recent studies suggest that lower levels of HDL may also be associated with an increased risk of sepsis and an increased rate of mortality in septic patients.However,this conclusion remains controversial.METHODS:MEDLINE,EMBASE,and CENTRAL databases were searched from inception to September 30,2019.All studies were conducted to evaluate the correlation of lipoprotein levels and the risk and outcomes of sepsis in adult patients.The primary outcomes were the risk and mortality of sepsis.RESULTS:Seven studies comprising 791 patients were included.Lower levels of HDL had no marked relevance with the risk of sepsis(odds radio[OR]for each 1 mg/dL increase,0.94;95%CI 0.86–1.02;P=0.078),whereas lower HDL levels were related to an increased mortality rate in septic patients(OR for below about median HDL levels,2.00;95%CI 1.23–3.24;P=0.005).CONCLUSION:This meta-analysis did not reveal a signifi cant association between lower HDL levels and an increase in the risk of sepsis,whereas it showed that lower HDL levels are associated with a higher mortality rate in septic adult patients.These findings suggest that HDL may be considered as a promising factor for the prevention and treatment of sepsis in the future.展开更多
Objective:Disturbances in lipid and lipoprotein profiles in patients after kidney transplantation (Tx) are still not understood. Methods:Serum levels of lipids,lipoprotein,triglyceride-rich lipoproteins (TRLs),and hig...Objective:Disturbances in lipid and lipoprotein profiles in patients after kidney transplantation (Tx) are still not understood. Methods:Serum levels of lipids,lipoprotein,triglyceride-rich lipoproteins (TRLs),and high-density lipoprotein (HDL) particles were determined,lipid and lipoprotein ratios were calculated,and their relationships in Tx patients with hypertriglyceridemia (HTG) and lower apolipoprotein AI (apoAI) concentration were examined. Serum lipid and lipoprotein levels were measured in 109 Tx patients and 89 healthy subjects. HDL particle levels were de-termined by enzyme-linked immunosorbent assay (ELISA). Results:Tx patients had disturbed concentration,com-position,and metabolism of TRLs and HDL particles. Multivariance analysis showed significant and positive correlation between HDL cholesterol/apoAI (HDL-C/apoAI) and HDL-C/HDL ratios,which indicates that both ratios could sensi-tively reflect changes in the HDL subclasses and their distribution into smaller size particles. In Tx patients,the de-creased HDL-C/apoAI ratio indicates that,along with the decreased apoAI concentration,the HDL-C level is de-creased. However,a low HDL-C/HDL ratio indicates that HDL particles in Tx patients transport lesser content of HDL-C but more triglyceride (TG) (high TG/HDL ratio),and thus are hypercatabolized and removed; therefore,con-centration of HDL particles in serum was decreased. Conclusion:The decrease of HDL-C/apoAI ratio seems to be a good marker of HDL subclass distribution into smaller size particles.展开更多
基金financially supported by the Key R&D Program of Shandong Province(2022SFGC0801)the National Natural Science Foundation of China(No.22005162 and 22175009)the Natural Science Foundation of Shandong Province(No.ZR2020QE093)。
文摘Osmotic energy,existing between the seawater and river water,is a renewable energy source,which can be directly converted into electricity by ion-exchange membranes(IEM).In traditional IEMs,the ion transport channels are formed by nanophase separation of hydrophilic ion carriers and hydrophobic segments.It is difficult to realize high-density ion channels with controlled spatial arrangement and length scale of ion carriers.Herein,we construct high-density 1D ion wires as transmission channels.Through molecular design,hydrophilic imidazole groups and hydrophobic alkyl tails were introduced into the repeat units,which self-assembled into 1D ion transporting core and protecting shell along the main chains.The areal density of the ionic wire arrays is up to~10^(12)cm^(-2),which is the highest value.The ionic wires ensure both high ion flux transport and high selectivity,achieving an ultrahigh-power density of 40.5 W m^(-2)at a 500-fold salinity gradient.Besides,the ionic wire array membrane is well recyclable and antibacterial.The ionic wires provide novel concept for next generation of high-performance membranes.
基金financially supported by the National Natural Science Foundation of China(Grant 22278439,21776313)the Shandong Province Higher Education Youth Innovation Technology Support Program(Grant 2022KJ074)。
文摘Metal-support interactions and hydrogen spillover effects in heterogeneous catalysts play a crucial role in aromatic hydrogenation reactions;however,these effects are limited by the metal dispersion on the catalyst and the number of acceptable H*receptors.This study prepares highly dispersed Ni nanoparticles(NPs)catalysts on a Beta substrate via precursor structure topology transformation.In contrast to traditional support materials,the coordination and electronic structure changes between the Ni NPs and the support were achieved,further optimizing the active interface sites and enhancing hydrogen activation and hydrogenation performance.Additionally,the-OH groups at the strong acid sites in zeolite effectively intensified the hydrogen spillover effect as receptors for H^(*)migration and anchoring,accelerating the hydrogenation rate of aromatic rings.Under solvent-free conditions,this catalyst was used for the hydrogenation reaction of aromatic-rich oils,directly producing a C_(8)-C_(14)branched cycloalkanes mixture with an aromatic conversion rate of>99%.The cycloalkanes mixture produced by this method features high density(0.92 g/mL)and a low freezing point(<-60℃),making it suitable for use as high-density aviation fuel or as an additive to enhance the volumetric heat value of conventional aviation fuels in practical applications.
基金supported by the National Natural Science Foundation of China(Nos.52373045 and 52033005).
文摘In rotationally extruded fittings,high-density polyethylene(HDPE)pipes prepared using conventional processing methods often suffer from poor pressure resistance and low toughness.This study introduces an innovative rotary shear system(RSS)to address these deficiencies through controlled mandrel rotation and cooling rates.We successfully prepared self-reinforced HDPE pipes with a three-layer structure combining spherical and shish-kebab crystals.Rotational processing aligned the molecular chains in the ring direction and formed shish-kebab crystals.As a result,the annular tensile strength of the rotationally processed three-layer shish-kebab structure(TSK)pipe increased from 26.7 MPa to 76.3 MPa,an enhancement of 185.8%.Notably,while maintaining excellent tensile strength(73.4 MPa),the elongation at break of the spherulite shishkebab spherulite(SKS)tubes was improved to 50.1%,as compared to 33.8%in the case of shish-kebab spherulite shish-kebab(KSK)tubes.This improvement can be attributed to the changes in the micro-morphology and polymer structure within the SKS tubes,specifically due to the formation of small-sized shish-kebab crystals and the low degrees of interlocking.In addition,2D-SAXS analysis revealed that KSK tubes have higher tensile strength due to smaller crystal sizes and larger shish dimensions,forming dense interlocking structures.In contrast,the SKS and TSK tubes had thicker amorphous regions and smaller shish sizes,resulting in reduced interlocking and mechanical performance.
基金Supported by National Key Research and Development Program of China(No.2023YFC3707901)。
文摘Evaluation of backfilling effectiveness plays a crucial role in the geological environment management and restoration of abandoned open-pit quarries,providing a scientific basis for subsequent greening efforts.Backfill soil,predominantly composed of silty clay,demonstrates high water retention capacity and elevated moisture content,leading to a pronounced resistivity contrast with the bedrock exposed by quarrying activities.To investigate the distribution of backfill soil subsurface and assess backfilling effectiveness in the study area,this study conducted a comprehensive geophysical investigation utilizing the high-density electrical resistivity tomography(ERT).A total of 19 ERT survey lines were deployed across three distinct areas in Liuyao Village,Huaibei City,Anhui Province,China.The inversion results,derived from both two-dimensional(2D)and three-dimensional(3D),reveal distinct electrical properties of the subsurface materials:the backfill soil layer shows low resistivity features,the fill stone layer exhibits medium to high resistivity,and the bedrock shows the highest resistivity.The 2D inversion results,from the data measured using the Wenner array effectively capture the spatial distribution and structural features of the backfill soil layer.The findings indicate a gradual east-west thinning of the clay layer within the quarry.Furthermore,the northern pit area exhibits a uniform distribution of backfill soil layer,indicative of effective backfilling operations.In contrast,the southern pit area lacks a well-defined clay layer,suggesting suboptimal backfilling effectiveness.
基金supported by the National Science Foundation of China under the Grant Nos.12127806 and 62175195the International Joint Research Laboratory for Micro/Nano Manufacturing and Measurement Technologies。
文摘High-density interconnect(HDI)soft electronics that can integrate multiple individual functions into one miniaturized monolithic system is promising for applications related to smart healthcare,soft robotics,and human-machine interactions.However,despite the recent advances,the development of three-dimensional(3D)soft electronics with both high resolution and high integration is still challenging because of the lack of efficient manufacturing methods to guarantee interlayer alignment of the high-density vias and reliable interlayer electrical conductivity.Here,an advanced 3D laser printing pathway,based on femtosecond laser direct writing(FLDW),is demonstrated for preparing liquid metal(LM)-based any layer HDI soft electronics.FLDW technology,with the characteristics of high spatial resolution and high precision,allows the maskless fabrication of high-resolution embedded LM microchannels and high-density vertical interconnect accesses for 3D integrated circuits.High-aspect-ratio blind/through LM microstructures are formed inside the elastomer due to the supermetalphobicity induced during laser ablation.The LM-based HDI circuit featuring high resolution(~1.5μm)and high integration(10-layer electrical interconnection)is achieved for customized soft electronics,including various customized multilayer passive electric components,soft multilayer circuit,and cross-scale multimode sensors.The 3D laser printing method provides a versatile approach for developing chip-level soft electronics.
基金supported by the National Key Research and Development Project(2023YFA1609100)the NSFC Funding(U2141207,52171111,52001083)+6 种基金Natural Science Foundation of Heilongjiang(YQ2023E026)China Postdoctoral Science foundation(2024M754149)Postdoctoral Fellowship Program of CPSF(GZC20242192)support from the National Science Foundation(DMR-1611180 and 1809640)with the program directors,DrsHKU Seed Fund for Collaborative Research(#2207101618)support by Croucher Senior Research Fellowship and City U Project(Project No.9229019)Shenzhen Science and Technology Program(Project No.JCYJ20220818101203007)。
文摘Dislocation strengthening,as one of the methods to simultaneously enhance the room temperature strength and ductility of alloys,does not achieve the desired strengthening and plasticity effect during elevated-temperature deformation.Here,we report a novel strategy to boost the dislocation multiplication and accumulation during deformation at elevated temperatures through dynamic strain aging(DSA).With the introduction of the rare-earth element Ho in Mg-Y-Zn alloy,Ho atoms diffuse toward dislocations during deformation at elevated temperatures,provoking the DSA effect,which increases the dislocation density significantly via the interactions of mobile dislocations and Ho atoms.The resulting alloy achieves a great enhancement of dislocation hardening and obtains the dual benefits of high strength and good ductility simultaneously at high homologous temperatures.The present work provides an effective strategy to enhancing the strength and ductility for elevated-temperature materials.
文摘In the context of rapid urbanization,high-density construction areas face significant challenges,including the reduction of ecological spaces and the deterioration of their functions.Planning and managing ecological spaces have emerged as essential strategies to address the conflict between urban development and ecological conservation.Using Jinjiang City,Fujian Province as the case study,this paper systematically examines the significance and primary challenges of ecological space planning in highdensity construction areas.It also identifies prevailing issues within the current research domain,including“an overemphasis on top-level design at the expense of implementation,a focus on isolated aspects rather than systemic integration,and prioritization of control over coordination”.This study proposes the key aspects of ecological space planning and management in high-density construction areas,focusing on three fundamental dimensions:human-centered demand orientation,the integration of top-down and bottomup linkage mechanisms,and a differentiated control system.Drawing on the full-element assessment of the ecosystem,ecological network construction,and full-process control system implemented in Jinjiang City,an integrated approach to ecological space governance,encompassing assessment,planning,and control,has been developed.This approach offers both theoretical insights and practical guidance for optimizing ecological spaces in comparable urban contexts.
基金Supported by Science and Technology Program of Quzhou,China,No.2022K67Zhejiang Medical Association Clinical Research Fund Project,No.2024ZYC-A526and the Research Project of Quzhou People’s Hospital,No.KYQD2024-006.
文摘BACKGROUND The association between the uric acid-to-high-density lipoprotein cholesterol ratio(UHR)and mental health among individuals with type 2 diabetes mellitus(T2DM)has not been thoroughly investigated.AIM To examine the link between UHR and symptoms of depression and anxiety in patients with T2DM.METHODS A cross-sectional analysis was carried out from March 2023 to April 2024,involving participants diagnosed with T2DM.Data on sociodemographic characteristics,clinical parameters,and UHR values were systematically gathered.The Self-Rating Depression Scale(SDS)and Self-Rating Anxiety Scale(SAS)were utilized to evaluate depressive and anxiety symptoms,respectively.To assess the relationships between UHR and SDS/SAS scores,linear regression models were employed,incorporating adjustments for potential confounding variables.Additionally,smooth curve fitting and threshold effect analyses were conducted to explore potential nonlinear relationships.RESULTS A total of 285 patients with T2DM were included.Initial univariate analysis demonstrated a significant positive correlation between elevated UHR levels and higher SDS and SAS scores.Multivariate regression analysis revealed that a one-unit rise in UHR was associated with a 1.13-point increase in SDS scores(95%CI:0.69-1.58)and a 0.57-point increase in SAS scores(95%CI:0.20-0.93).After controlling for confounders,UHR remained positively correlated with SDS(β=1.55,95%CI:0.57-2.53)and SAS(β=0.72,95%CI:0.35-1.09).Nonlinear analysis identified critical thresholds at UHR values of 5.02 for SDS and 4.00 for SAS,beyond which the relationships between UHR and psychological symptom scores became markedly stronger(P<0.05).CONCLUSION Higher UHR levels are significantly linked to exacerbated depressive and anxiety symptoms in patients with T2DM.These results indicate that UHR may function as a promising biomarker to identify individuals at greater risk of mental health complications within this population.
基金funded by the Scientific and Technological Key Program of Guizhou Province, China (Qiankehezhicheng [2022] Key 031)the National Natural Science Foundation of China (32160483 and 32360497)+2 种基金the Post-Funded Project for the National Natural Science Foundation of China from Guizhou University ([2023]093)the Key Laboratory of Molecular Breeding for Grain and Oil Crops in Guizhou Province, China (Qiankehezhongyindi [2023]008)the Key Laboratory of Functional Agriculture of Guizhou Provincial Higher Education Institutions, China (Qianjiaoji [2023] 007)。
文摘Rapeseed mustard(Brassica juncea L.) is the third most important oilseed crop in the world, but the geneticmechanism underlying its massive phenotypic variation remains largely unexplored. In this study, specific length amplified fragment sequencing(SLAF-Seq) was used to resequence a population comprising 197 F8recombinantinbred lines(RILs) derived from a cross between vegetable-type Qichi881 and oilseed-type YufengZC of B. juncea. In total, 438,895 high-quality SLAFs were discovered, 47,644 of which were polymorphic, and 3,887 of the polymorphic markers met the requirements for genetic map construction. The final map included 3,887 markers on 18 linkage groups and was 1,830.23 centiMorgan(cM) in length, with an average distance of 0.47 cM between adjacent markers. Using the newly constructed high-density genetic map, a total of 53 QTLs for erucicacid(EA), oleic acid(OA), and linolenic acid(LNA) were detected and integrated into eight consensus QTLswith two for each of these traits. For each of these three traits, two candidate genes were cloned and sequence analysis indicated colocalization with their respective consensus QTLs. The co-dominant allele-specific markers for Bju.FAD3.A03 and Bju.FAD3.B07 were developed and showed co-localization with their consensus QTLs andco-segregation with LNA content, further supporting the results of QTL mapping and bioinformatic analysis. Theexpression levels of the cloned homologous genes were also determined, and the genes were tightly correlatedwith the EA, OA and LNA contents of different lines. The results of this study will facilitate the improvement offatty acid traits and molecular breeding of B. juncea. Further uses of the high-density genetic map created in this study are also discussed.
基金supported by the National Natural Science Foundation of China(72061006)the research on the auxiliary diagnosis system of chronic injury of levator scapulae based on the concept of digital twin(Contract No:Qian Kehe Support[2023]General 117)Research on indoor intelligent assisted walking robot for the rehabilitation of walking ability of the elderly(Contract No:Qian kehe Support[2023]General 124).
文摘Stroke survivors often face significant challenges when performing daily self-care activities due to upper limb motor impairments.Traditional surface electromyography(sEMG)analysis typically focuses on isolated hand postures,overlooking the complexity of object-interactive behaviors that are crucial for promoting patient independence.This study introduces a novel framework that combines high-density sEMG(HD-sEMG)signals with an improved Whale Optimization Algorithm(IWOA)-optimized Long Short-Term Memory(LSTM)network to address this limitation.The key contributions of this work include:(1)the creation of a specialized HD-sEMG dataset that captures nine continuous self-care behaviors,along with time and posture markers,to better reflect real-world patient interactions;(2)the development of a multi-channel feature fusion module based on Pascal’s theorem,which enables efficient signal segmentation and spatial–temporal feature extraction;and(3)the enhancement of the IWOA algorithm,which integrates optimal point set initialization,a diversity-driven pooling mechanism,and cosine-based differential evolution to optimize LSTM hyperparameters,thereby improving convergence and global search capabilities.Experimental results demonstrate superior performance,achieving 99.58%accuracy in self-care behavior recognition and 86.19%accuracy for 17 continuous gestures on the Ninapro db2 benchmark.The framework operates with low latency,meeting the real-time requirements for assistive devices.By enabling precise,context-aware recognition of daily activities,this work advances personalized rehabilitation technologies,empowering stroke patients to regain autonomy in self-care tasks.The proposed methodology offers a robust,scalable solution for clinical applications,bridging the gap between laboratory-based gesture recognition and practical,patient-centered care.
文摘Space-Based Solar Power(SBSP) presents a promising solution for achieving carbon neutrality and Renewable Electricity 100%(RE100) goals by offering a stable and continuous energy supply. However, its commercialization faces significant obstacles due to the technical challenges of long-distance microwave Wireless Power Transmission(WPT) from geostationary orbit. Even ground-based kilometer-scale WPT experiments remain difficult because of limited testing infrastructure, high costs, and strict electromagnetic wave regulations. Since the 1975 NASA-Raytheon experiment, which successfully recovered 30 kW of power over 1.55 km, there has been little progress in extending the transmission distance or increasing the retrieved power. This study proposes a cost-effective methodology for conducting long-range WPT experiments in constrained environments by utilizing existing infrastructure. A deep space antenna operating at 2.08 GHz with an output power of 2.3 kW and a gain of 55.3 dBi was used as the transmitter. Two test configurations were implemented: a 1.81 km ground-to-air test using an aerostat to elevate the receiver and a 1.82 km ground-to-ground test using a ladder truck positioned on a plateau. The rectenna consists of a lightweight 3×3 patch antenna array(0.9 m × 0.9 m), accompanied by a steering device and LED indicators to verify power reception. The aerostat-based test achieved a power density of 154.6 mW/m2, which corresponds to approximately 6.2% of the theoretical maximum. The performance gap is primarily attributed to near-field interference, detuning of the patch antenna, rectifier mismatch, and alignment issues. These limitations are expected to be mitigated through improved patch antenna fabrication, a transition from GaN to GaAs rectifiers optimized for lower input power, and the implementation of an automated alignment system. With these enhancements, the recovered power is expected to improve by approximately four to five times. The results demonstrate a practical and scalable framework for long-range WPT experiments under constrained conditions and provide key insights for advancing SBSP technology.
文摘Founded in September 2020,the International SparkLink Alliance(iSLA)now has approximately 1,200 members in diverse sectors including terminals,homes,vehicles,manufacturing,transportation,finance and healthcare.The iSLA has established a technical standards system for wireless short-range communication covering full-stack standards such as the end-to-end protocol system.
基金funded by the Deanship of Scientific Research(DSR)at King Abdulaziz University,Jeddah,Saudi Arabia,grant number RG-2-611-42(A.O.A.).
文摘Wi-Fi technology has evolved significantly since its introduction in 1997,advancing to Wi-Fi 6 as the latest standard,with Wi-Fi 7 currently under development.Despite these advancements,integrating machine learning into Wi-Fi networks remains challenging,especially in decentralized environments with multiple access points(mAPs).This paper is a short review that summarizes the potential applications of federated reinforcement learning(FRL)across eight key areas of Wi-Fi functionality,including channel access,link adaptation,beamforming,multi-user transmissions,channel bonding,multi-link operation,spatial reuse,and multi-basic servic set(multi-BSS)coordination.FRL is highlighted as a promising framework for enabling decentralized training and decision-making while preserving data privacy.To illustrate its role in practice,we present a case study on link activation in a multi-link operation(MLO)environment with multiple APs.Through theoretical discussion and simulation results,the study demonstrates how FRL can improve performance and reliability,paving the way for more adaptive and collaborative Wi-Fi networks in the era of Wi-Fi 7 and beyond.
基金supported by the National Natural Science Foundation of China under Grant 62472264the Natural Science Distinguished Youth Foundation of Shandong Province under Grant ZR2025QA13。
文摘In the wireless energy transmission service composition optimization problem,a key challenge is accurately capturing users’preferences for service criteria under complex influencing factors,and optimally selecting a composition solution under their budget constraints.Existing studies typically evaluate satisfaction solely based on energy transmission capacity,while overlooking critical factors such as price and trustworthiness of the provider,leading to a mismatch between optimization outcomes and user needs.To address this gap,we construct a user satisfaction evaluation model for multi-user and multi-provider scenarios,systematically incorporating service price,transmission capacity,and trustworthiness into the satisfaction assessment framework.Furthermore,we propose a Budget-Aware Preference Adjustment Model that predicts users’baseline preference weights from historical data and dynamically adjusts them according to budget levels,thereby reflecting user preferences more realistically under varying budget constraints.In addition,to tackle the composition optimization problem,we develop a ReflectiveEvolutionary Large Language Model—Guided Ant Colony Optimization algorithm,which leverages the reflective evolution capability of large language models to iteratively generate and refine heuristic information that guides the search process.Experimental results demonstrate that the proposed framework effectively integrates personalized preferences with budget sensitivity,accurately predicts users’preferences,and significantly enhances their satisfaction under complex constraints.
文摘This paper studies wireless vehicular communication(VehCom)in intelligent transportation systems using an orthogonal frequency division multiplexing with index modulation(OFDM-IM).In the concept of IM,data is transmitted not only through the modulated symbols but also via the indices of the active subcarriers.In contrast to the original OFDM,OFDM-IM activates only non-zero subcarriers,increasing energy efficiency.However,the pilotassisted channel estimation(CE)method is a significant challenge in OFDM-IM,where the desired pilot subcarrier interval is related to the OFDM-IM subblock length.This paper proposes a walsh-scattered pilot-assisted CE for OFDM-IM VehCom.The optimum walsh-scattered pilot assignment is proposed to improve the transmission efficiency.Furthermore,a space-time block code with a high transmit diversity gain is employed for OFDM-IM VehCom to enhance VehCom's signal quality.The results show that the proposed method performs higher CE accuracy and better bit-error rate with significant spectral and energy efficiencies than conventional methods.
基金Projects(41074085,41374118)supported by the National Natural Science Foundation of ChinaProject(20120162110015)supported by Doctoral Fund of Ministry of Education of ChinaProject(NCET-12-0551)supported by Program for New Century Excellent Talents in University,China
文摘The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy and effect can not meet the precise requirement of the inversion. Two typical models of the geological bodies were designed, and forward calculation was carried out using finite element method. The forward-modeled profiles were obtained. 1% Gaussian random error was added in the forward models and then 2D and 3D inversions using a high-density resistivity method were undertaken to realistically simulate field data and analyze the sensitivity of the 2D and 3D inversion algorithms to noise. Contrast between the 2D and 3D inversion results of least squares inversion shows that two inversion results of high-density resistivity method all can basically reflect the spatial position of an anomalous body. However, the 3D inversion can more effectively eliminate the influence of interference from Gaussian random error and better reflect the distribution of resistivity in the anomalous bodies. Overall, the 3D inversion was better than 2D inversion in terms of embodying anomalous body positions, morphology and resistivity properties.
文摘Various previous studies have found a negative cor-relation between the risk of cardiovascular events and serum high-density lipoprotein(HDL) cholesterol levels. The reverse cholesterol transport, a pathway of choles-terol from peripheral tissue to liver which has several potent antiatherogenic properties. For instance, the particles of HDL mediate to transport cholesterol from cells in arterial tissues, particularly from atherosclerotic plaques, to the liver. Both ATP-binding cassette trans-porters(ABC) A1 and ABCG1 are membrane cholesterol transporters and have been implicated in mediating cholesterol effluxes from cells in the presence of HDL and apolipoprotein A-I, a major protein constituent of HDL. Previous studies demonstrated that ABCA1 and ABCG1 or the interaction between ABCA1 and ABCG1 exerted antiatherosclerotic effects. As a therapeutic approach for increasing HDL cholesterol levels, much focus has been placed on increasing HDL cholesterol levels as well as enhancing HDL biochemical functions. HDL therapies that use injections of reconstituted HDL, apoA-I mimetics, or full-length apoA-I have shown dramatic effectiveness. In particular, a novel apoA-I mi-metic peptide, Fukuoka University ApoA-I Mimetic Pep-tide, effectively removes cholesterol via specific ABCA1 and other transporters, such as ABCG1, and has an an-tiatherosclerotic effect by enhancing the biological func-tions of HDL without changing circulating HDL choles-terol levels. Thus, HDL-targeting therapy has significant atheroprotective potential, as it uses lipid transporter-targeting agents, and may prove to be a therapeutic tool for atherosclerotic cardiovascular diseases.
基金supported by the National Key Research and Development Program(2021YFC2104400)the Tianjin Science and Technology Plan Project(21JCQNJC00340)the Haihe Laboratory of Sustainable Chemical Transformations。
文摘Synthesizing high-density fuel from lignocellulose can not only achieve green and low-carbon development,but also expand the feedstock source of hydrocarbon fuel.Here,we reported a route of producing high-density fuel from lignin oil and hemicellulose derivative cyclopentanol through alkylation and hydrodeoxygenation,HY with SiO_(2)/Al_(2)O_(3) molar ratio of 5.3 was screened as the alkylation catalyst in the reaction of model phenolic compounds and mixtures,and the reaction conditions were optimized to achieve conversion of phenolic compounds higher than 87%and selectivity of bicyclic and tricyclic products higher than 99%.Then two phenolic pools simulating the composition of two typic lignin oils were studied to validate the alkylation and analyze the competition mechanism of phenolic compounds in mixture system.Finally,real lignin oil from depolymerized of beech powder was tested,and notably80%of phenolic monomers in the oil were converted into fuel precursor.After hydrodeoxygenation,the alkylated product was converted to fuel blend with a density of 0.91 g/mL at 20℃and a freezing point lower than-60℃,very promising as high density fuel.This work provides a facile and energyefficient way of synthesizing high-performance jet fuel directly from lignocellulosic derivatives,which decreases processing energy consumption and improve the utilization rate of feedstock.
文摘BACKGROUND:An increase in high-density lipoprotein(HDL)is well associated with a decreased cardiovascular risk,especially atherosclerosis.Recent studies suggest that lower levels of HDL may also be associated with an increased risk of sepsis and an increased rate of mortality in septic patients.However,this conclusion remains controversial.METHODS:MEDLINE,EMBASE,and CENTRAL databases were searched from inception to September 30,2019.All studies were conducted to evaluate the correlation of lipoprotein levels and the risk and outcomes of sepsis in adult patients.The primary outcomes were the risk and mortality of sepsis.RESULTS:Seven studies comprising 791 patients were included.Lower levels of HDL had no marked relevance with the risk of sepsis(odds radio[OR]for each 1 mg/dL increase,0.94;95%CI 0.86–1.02;P=0.078),whereas lower HDL levels were related to an increased mortality rate in septic patients(OR for below about median HDL levels,2.00;95%CI 1.23–3.24;P=0.005).CONCLUSION:This meta-analysis did not reveal a signifi cant association between lower HDL levels and an increase in the risk of sepsis,whereas it showed that lower HDL levels are associated with a higher mortality rate in septic adult patients.These findings suggest that HDL may be considered as a promising factor for the prevention and treatment of sepsis in the future.
基金Project (Nos. PW 55/09 and DS 41/09) supported by the Department of Laboratory Diagnostics, Medical University of Lublin, Poland
文摘Objective:Disturbances in lipid and lipoprotein profiles in patients after kidney transplantation (Tx) are still not understood. Methods:Serum levels of lipids,lipoprotein,triglyceride-rich lipoproteins (TRLs),and high-density lipoprotein (HDL) particles were determined,lipid and lipoprotein ratios were calculated,and their relationships in Tx patients with hypertriglyceridemia (HTG) and lower apolipoprotein AI (apoAI) concentration were examined. Serum lipid and lipoprotein levels were measured in 109 Tx patients and 89 healthy subjects. HDL particle levels were de-termined by enzyme-linked immunosorbent assay (ELISA). Results:Tx patients had disturbed concentration,com-position,and metabolism of TRLs and HDL particles. Multivariance analysis showed significant and positive correlation between HDL cholesterol/apoAI (HDL-C/apoAI) and HDL-C/HDL ratios,which indicates that both ratios could sensi-tively reflect changes in the HDL subclasses and their distribution into smaller size particles. In Tx patients,the de-creased HDL-C/apoAI ratio indicates that,along with the decreased apoAI concentration,the HDL-C level is de-creased. However,a low HDL-C/HDL ratio indicates that HDL particles in Tx patients transport lesser content of HDL-C but more triglyceride (TG) (high TG/HDL ratio),and thus are hypercatabolized and removed; therefore,con-centration of HDL particles in serum was decreased. Conclusion:The decrease of HDL-C/apoAI ratio seems to be a good marker of HDL subclass distribution into smaller size particles.
