To fundamentally alleviate the excavation chamber clogging during slurry tunnel boring machine(TBM)advancing in hard rock,large-diameter short screw conveyor was adopted to slurry TBM of Qingdao Jiaozhou Bay Second Un...To fundamentally alleviate the excavation chamber clogging during slurry tunnel boring machine(TBM)advancing in hard rock,large-diameter short screw conveyor was adopted to slurry TBM of Qingdao Jiaozhou Bay Second Undersea Tunnel.To evaluate the discharging performance of short screw conveyor in different cases,the full-scale transient slurry-rock two-phase model for a short screw conveyor actively discharging rocks was established using computational fluid dynamics-discrete element method(CFD-DEM)coupling approach.In the fluid domain of coupling model,the sliding mesh technology was utilized to describe the rotations of the atmospheric composite cutterhead and the short screw conveyor.In the particle domain of coupling model,the dynamic particle factories were established to produce rock particles with the rotation of the cutterhead.And the accuracy and reliability of the CFD-DEM simulation results were validated via the field test and model test.Furthermore,a comprehensive parameter analysis was conducted to examine the effects of TBM operating parameters,the geometric design of screw conveyor and the size of rocks on the discharging performance of short screw conveyor.Accordingly,a reasonable rotational speed of screw conveyor was suggested and applied to Jiaozhou Bay Second Undersea Tunnel project.The findings in this paper could provide valuable references for addressing the excavation chamber clogging during ultra-large-diameter slurry TBM tunneling in hard rock for similar future.展开更多
By determining the distribution and extent of geological structures surrounding the Mingyan Tunnel,Xicheng Town,Helong City,Jilin Province,we can evaluate the stability of the rock mass and assess potential hazards du...By determining the distribution and extent of geological structures surrounding the Mingyan Tunnel,Xicheng Town,Helong City,Jilin Province,we can evaluate the stability of the rock mass and assess potential hazards during tunnel construction.We use the high-density resistivity method to analyze the subsurface structure of the study area.Conductive anomalies are likely to represent joint and fissure systems within strongly weathered host rocks,and the bedrock surrounding the tunnel is relatively stable and does not contain well-developed faults.High-density resistivity analysis can provide valuable information in the context of tunnel engineering and safety.展开更多
The authors employ the high-density resistivity method to image the subsurface structure of a mountain in Erdaojiang District,Tonghua City,Jilin Province,China,to evaluate the potential risk of slope failure on surrou...The authors employ the high-density resistivity method to image the subsurface structure of a mountain in Erdaojiang District,Tonghua City,Jilin Province,China,to evaluate the potential risk of slope failure on surrounding residential areas and infrastructure,and identify a shallow fault that extends across the center of the mountain and is perpendicular to the mountain slope and accurately locate the spatial position and depth of another fault on the southern side of the mountain.The results provide an important basis for evaluating mountain slope stability.This study also demonstrates that the high-density resistivity method is effective for detecting mountain faults.展开更多
The disaster of seawater intrusion seriously affects people's lives and restricts economic development,so the detection and treatment of seawater intrusion is a long-term task.On the basis of field investigation a...The disaster of seawater intrusion seriously affects people's lives and restricts economic development,so the detection and treatment of seawater intrusion is a long-term task.On the basis of field investigation and water quality analysis,according to the change characteristics of apparent resistivity of groundwater after Cl-reaches 250 mg/L,the theoretical basis for the application of high-density resistivity method was determined,and the characteristic values of apparent resistivity for seawater intrusion interfaces in different geological characteristic regions in Laizhou Bay area were determined by typical profile tests.Combined with water quality investigation and other means,profiles for the high-density resistivity method were arranged,and the interfaces between saline and fresh water were accurately divided.展开更多
High-density electrical method has been proved to be an effective method for probing shallow sedimentary layers.It is principally used to identify the boundary between the Quaternary soil layer and bedrock according t...High-density electrical method has been proved to be an effective method for probing shallow sedimentary layers.It is principally used to identify the boundary between the Quaternary soil layer and bedrock according to the vertical change of apparent resistivity.However,the artificial filling layer has the characteristics of heterogeneity and high porosity,which makes it challenging to detect the artificial filling layer by high-density electrical method.The key to solve this problem is to detect the difference of conductivity between the filling layer and the underlying bedrock.This paper takes the land in Chengjiangshan area of Huaibei City,Anhui Province as the detection target.On the basis of fully analyzing the physical properties of the artificial filling layer,two-dimensional high-density electrical survey and inversion are used to define the thickness of the artificial filling layer.The research shows that the highdensity resistivity method has obvious advantages in delineating the distribution of bedrock and the thickness of the filling layer,and the reliability of the high-density electrical method in the detection of the artificial filling layer,and delineates the scope of the filling layer is verified by the borehole data.展开更多
Some unfavorable geological conditions can affect the construction of tunnels.In order to evaluate the damage degree of tunnel construction and determine the surrounding rock grade and stability of the tunnel,the auth...Some unfavorable geological conditions can affect the construction of tunnels.In order to evaluate the damage degree of tunnel construction and determine the surrounding rock grade and stability of the tunnel,the authors used high-density resistivity method to detect the surrounding rocks of Shimodong tunnel in Xicheng Town of Helong City.The underground resistivity structures of the entrance,exit and middle parts of the tunnel are obtained.Through analysis,it is found that there are no bedrock faults near the tunnel,although some joints and fissures are developed in some locations,which are characterized by low-resistivity anomalies.The tunnel structures are stable overall,favorable for safe and efficient construction.The study also proves the good application effect of the high-density resistivity method in tunnel safety detection.展开更多
The authors employ the high-density resistivity method during an archaeological investigation of Sumicheng site,an ancient city of the Tang Dynasty,to find evidence of human activities and locate a favorable target fo...The authors employ the high-density resistivity method during an archaeological investigation of Sumicheng site,an ancient city of the Tang Dynasty,to find evidence of human activities and locate a favorable target for archaeological excavation in the southern part of the outer city.There are two obvious high-resistivity structures,the south wall of the inner city and an ancient building near the south gate along the outer city wall,of which the resistivities are indicative of rammed soil foundations.The south wall of the inner city is continuous but is cut off abruptly to the east,which we suggest it is due to either wall damage or destruction.The resistivity signature of the target area is verified by archaeological excavation,proving the feasibility and effectiveness of implementing the high-density resistivity method for archaeological exploration.展开更多
In the research, pot experiment and field testing were conducted to study the effect of different crops, soil types, and irrigation modes on biogas slurry diges- tions. The results showed that when silage maize, sweet...In the research, pot experiment and field testing were conducted to study the effect of different crops, soil types, and irrigation modes on biogas slurry diges- tions. The results showed that when silage maize, sweet sorghum and Chinese cabbage were planted in purple soils, the quantities of digested biogas slurry were of 57, 157.5, and 34.5 t/hm2, respectively, while the quantities of digested biogas slurry were 70.5, 157.5 and 40.5 t/hm2 in yellow soils. Besides, the digested biogas slurries reached 36 and 27 t/hm2 as per flood irrigation and sprinkling irrigation when Chinese cabbages were planted in yellow soils. The research indicated crop variety, soil type, and irrigation method all have effects on farmland digestion of biogas slurry.展开更多
The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy ...The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy and effect can not meet the precise requirement of the inversion. Two typical models of the geological bodies were designed, and forward calculation was carried out using finite element method. The forward-modeled profiles were obtained. 1% Gaussian random error was added in the forward models and then 2D and 3D inversions using a high-density resistivity method were undertaken to realistically simulate field data and analyze the sensitivity of the 2D and 3D inversion algorithms to noise. Contrast between the 2D and 3D inversion results of least squares inversion shows that two inversion results of high-density resistivity method all can basically reflect the spatial position of an anomalous body. However, the 3D inversion can more effectively eliminate the influence of interference from Gaussian random error and better reflect the distribution of resistivity in the anomalous bodies. Overall, the 3D inversion was better than 2D inversion in terms of embodying anomalous body positions, morphology and resistivity properties.展开更多
To study the effects of different storage methods and time on content of nutrients in biogas slurry of straw, two storage methods were carried out on biogas slurry between open storage and airtight storage conditions ...To study the effects of different storage methods and time on content of nutrients in biogas slurry of straw, two storage methods were carried out on biogas slurry between open storage and airtight storage conditions at normal atmospheric temperature. The contents of N, P, K, and organic matter in biogas slurry of straw were determined in different storage times. The results showed that： during the pro-cess of biogas slurry storage, little change occurred in the content of the organic matter while the total content of N, P, K significantly declined; up to 50 days, the total content of N, P, K reduced to nearly 80%-90%. Because the contents of N, P, K in biogas slurry reduced less in airtight storage conditions so that a better re-sult was found on airtight storage methods than open storage methods in fertilizer field of biogas slurry of straw.展开更多
It is difficult to temporally and spatially track and characterize the slurry viscosity in flowing water during grouting simulation.In this study,a sequential flow and solidification(SFS)method considering the spatial...It is difficult to temporally and spatially track and characterize the slurry viscosity in flowing water during grouting simulation.In this study,a sequential flow and solidification(SFS)method considering the spatial-temporal evolution of slurry viscosity in flowing water in karst conduit is proposed.First,a time-dependent model for the threshold function of slurry viscosity is established.During the grouting process,the spatial-temporal evolution of slurry viscosity is revealed by tracking the diffusion behavior of the slurry injected at different times.This method is capable of describing the gradual solidification process of the slurry during grouting.Furthermore,a physical model of grouting in a karst conduit is developed.Second,the effectiveness of the SFS method in grouting simulation is verified by the experiment of grouting conduit in flowing water.The SFS method enables real-time monitoring of fluid velocity and pressure during grouting in flowing water and provides a feasible calculation method for revealing the grouting plugging mechanism in complex karst conduits at different engineering scales.In addition,it can be used to guide the design of grouting tests in flowing water,improve cost efficiency,and provide theoretical basis for optimizing grouting design and slurry selection.展开更多
The particle simulation method is used to solve free-surface slurry flow problems that may be encountered in several scientific and engineering fields.The main idea behind the use of the particle simulation method is ...The particle simulation method is used to solve free-surface slurry flow problems that may be encountered in several scientific and engineering fields.The main idea behind the use of the particle simulation method is to treat granular or other materials as an assembly of many particles.Compared with the continuum-mechanics-based numerical methods such as the finite element and finite volume methods,the movement of each particle is accurately described in the particle simulation method so that the free surface of a slurry flow problem can be automatically obtained.The major advantage of using the particle simulation method is that only a simple numerical algorithm is needed to solve the governing equation of a particle simulation system.For the purpose of illustrating how to use the particle simulation method to solve free-surface flow problems,three examples involving slurry flow on three different types of river beds have been considered.The related particle simulation results obtained from these three examples have demonstrated that:1) The particle simulation method is a promising and useful method for solving free-surface flow problems encountered in both the scientific and engineering fields;2) The shape and irregular roughness of a river bed can have a significant effect on the free surface morphologies of slurry flow when it passes through the river bed.展开更多
In this paper, the effectiveness, applicability and validity of chemicalephysical combined methods（CPCMs） for treatment of marine clay （MC） slurries were evaluated. The method CPCM1 combineschemical stabilization ...In this paper, the effectiveness, applicability and validity of chemicalephysical combined methods（CPCMs） for treatment of marine clay （MC） slurries were evaluated. The method CPCM1 combineschemical stabilization and vacuum preloading （VP）, while CPCM2 is similar to CPCM1 but includes boththe application of surcharge and use of geo-bags to provide confinement during surcharge preloading.The key advantage of CPCM2 using geo-bags is that the surcharge can be immediately applied on thechemically stabilized slurries. Two types of geo-bags were investigated under simulated land filling anddyke conditions, respectively. The test results show that the shear strength （cu） of treated slurry byCPCM2 is generally much higher than that by CPCM1. Besides, the use of CPCM2 can significantly reducethe treatment time due to the short drainage paths created by geo-bags. Overall, CPCM2 allows fasterconsolidation and higher preloading that help to achieve higher mechanical properties of the stabilizedslurry. There are consistent relationships between cU and water content of slurries treated by CPCM2.Several important observations were also made based on comparisons of experimental data. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.展开更多
The filling mining method is important in realizing the green mining of mineral resources.Aiming at the problems of land resource occupation,environmental pollution,and rational utilization of coal-based solid wastes ...The filling mining method is important in realizing the green mining of mineral resources.Aiming at the problems of land resource occupation,environmental pollution,and rational utilization of coal-based solid wastes such as coal gangue,fly ash,and desulfurization gypsum,a new paste filling material was developed with coal gangue,fly ash,and desulfurization gypsum as raw materials.The microstructure of the raw materials was analyzed by XRD and SEM.Combined with the Box-Behnken experimental design,the effect of each component on the fluidity of the filling slurry was analyzed through the response surface analysis.The significance of each component on its bleeding and fluidity was determined,and the optimal ratio of the filling slurry was obtained.Experimental results show that the microcosmic morphology of coal gangue,desulfurization gypsum,and gasification slag presents an irregular block and rough particle surface;the microcosmic morphology of fly ash and bottom slag presents first out spherical or quasi spherical particles.Moreover,obvious sintering traces exist on the surface of the bottom slag.The main crystal mineral of coal gangue and fly ash is SiO_(2),the desulfurization gypsum is composed of Ca(SO_(4))(H_(2)O)and Ca(CO_(3))crystal minerals,the gasification slag is composed of carbon and nitrogen compounds,and the main crystal mineral components in the bottom slag sample are SiO_(2) and Al_(x)Si_(y)O_(z) compounds.The order of significance of each key factor on slurry fluidity is as follows:C(desulfurization gypsum)>D(gasification slag and bottom slag 1:1)>A(coal gangue)>B(fly ash).The order of the significance of each key factor on slurry bleeding is as follows:B(fly ash)>C(desulfurization gypsum)>D(gasification slag and bottom slag 1:1)>A(coal gangue).Considering the material preparation,field application,and other conditions,the mass percentage of each factor content of the new paste filling material is as follows:49.5%coal gangue,8.3%fly ash,4.1%desulfurization gypsum,6.2%gasification slag,and 6.2%bottom slag.展开更多
Rheocasting with semi-solid slurry has been widely used in industrial processes in recent years.The Cup-Cast method is one of the most effective ways to produce semi-solid slurry for rheocasting.In order to study the ...Rheocasting with semi-solid slurry has been widely used in industrial processes in recent years.The Cup-Cast method is one of the most effective ways to produce semi-solid slurry for rheocasting.In order to study the effect of electromagnetic stirring on the fabrication of semi-solid slurry,we have applied the Double-Axis-Electromagnetic Stirrer(DAEMS)to the Cup-Cast method.Microstructure of the slurry was observed by an optical microscope and Electron Back-Scatter Patterns(EBSP).The results indicated that the electromagnetic stirrer made it possible to accelerate the cooling rate of the melt,thus resulting in a higher quality slurry.展开更多
The slurry method is one of the oldest techniques of deposition of aluminide coating on the nickel superalloy, titanium alloys and steel. It is characterized by relatively low costs of its realisation and necessary eq...The slurry method is one of the oldest techniques of deposition of aluminide coating on the nickel superalloy, titanium alloys and steel. It is characterized by relatively low costs of its realisation and necessary equipment. This method en-ables a simple modification of chemical composition of the coating through addition of different powders. The author showed study on the possibility of modification of the Al-Si slurry chemical composition used for aluminide coating deposition by addition of MeCrAlY powder. The slurry was deposited by immersion than the diffusion treatment at 950℃ for two hours was applied. The thickness of obtained coatings was in the range of 30 - 65 μm.展开更多
As the dimension of the slurry shield is greatly increasing, more and more attention is paid to the face stability of slurry shield-driven tunnel in recently years. A reduced-scale slurry shield model test is carried ...As the dimension of the slurry shield is greatly increasing, more and more attention is paid to the face stability of slurry shield-driven tunnel in recently years. A reduced-scale slurry shield model test is carried out based on the background of Qianjiang River Tunnel and Shanghai Yangtze River Tunnel. The results of the model test are presented in this paper with particular emphasis on the slurry shield driving parameters and the critical slurry pressure of the excavating face. It is shown that the behavior of large slurry shield-driving induced by the cutting face is mostly decided by the fluctuation of the slurry pressure in the chamber, and a smaller slurry pressure fluctuation range is presented according to the results of the physical model test. Especially, it is more difcult to control the machine in sandy silt than that in soft clay and muddy clay. The chamber pressure will fluctuate greatly when excavating in high permeability ground, and the gradient of accumulation of the flux diference could be used to evaluate the face balance of the slurry shield excavation.展开更多
The vaporization ratios of the slurry at various temperature and partial pressure were calculated with the group-contribution method,and then the phase state of the slurry in the residue fluid catalytic cracking(RFCC)...The vaporization ratios of the slurry at various temperature and partial pressure were calculated with the group-contribution method,and then the phase state of the slurry in the residue fluid catalytic cracking(RFCC) disengager was determined.This research could provide some advices on how to select the technological conditions to decrease the coking in the RFCC disengager.The oil gas temperature and the slurry partial pressure had signifi- cant effects on the vaporization ratio of the slurry.Increasing the oil gas temperature and reducing the slurry partial pressure could effectively slow down the coking speed in the RFCC disengager.According to the calculation results, a correlation was established to predict the vaporization ratio of the slurry under different operating conditions.展开更多
The main objective of this study was to determine the desiccation behavior of clay slurries. A clay slurry with high water adsorption capacity(W_L = 180%,W_P 60%,W_s = 20) was used to determine the soil water characte...The main objective of this study was to determine the desiccation behavior of clay slurries. A clay slurry with high water adsorption capacity(W_L = 180%,W_P 60%,W_s = 20) was used to determine the soil water characteristic curve(SWCC), shrinkage curve, and hydraulic conductivity. The last parameter was determined similar to the Instantaneous Profile Method using evaporation tests. Results indicated that the clay slurry had an air entry value(AEV) of 1000 kPa and a residual suction of 5000 kPa that occurred at the plastic limit and the shrinkage limit, respectively. The discrepancy between theoretical and measured shrinkage limit was due to the gradual increase in clay particle contact. Unlike soils, the saturated hydraulic conductivity varied by two orders of magnitude(4×10 ~10 m/s at 20 kPa to 3 x 10 ~12 m/s at AEV). The unsaturated k further decreased to 10 ~14 m/s at 6 x 10~4 kPa beyond which vapor flow took place.展开更多
In this experiment, the contents of serum total cholesterol (TC), triglyceride(TG),low-density lipoprotein(LDL), high-density lipoprotein(HDL) were used as indexes to observe the effects of warming-reinforcing method ...In this experiment, the contents of serum total cholesterol (TC), triglyceride(TG),low-density lipoprotein(LDL), high-density lipoprotein(HDL) were used as indexes to observe the effects of warming-reinforcing method on rabbit’s lipide, liopoprotein. The results indicated that in the warming-reinforcing group, TC decreased markedly and HDL increased obviously with significant difference as compared with the twirling-reinforcing group:TC and LDL also decreased, but no significant differencte as compared with the twirling-reinforcing group. Warming-reinforcing method can decrease lipids more effectively than twirling-reinforcing method.展开更多
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.2023YJS053)the National Natural Science Foundation of China(Grant No.52278386).
文摘To fundamentally alleviate the excavation chamber clogging during slurry tunnel boring machine(TBM)advancing in hard rock,large-diameter short screw conveyor was adopted to slurry TBM of Qingdao Jiaozhou Bay Second Undersea Tunnel.To evaluate the discharging performance of short screw conveyor in different cases,the full-scale transient slurry-rock two-phase model for a short screw conveyor actively discharging rocks was established using computational fluid dynamics-discrete element method(CFD-DEM)coupling approach.In the fluid domain of coupling model,the sliding mesh technology was utilized to describe the rotations of the atmospheric composite cutterhead and the short screw conveyor.In the particle domain of coupling model,the dynamic particle factories were established to produce rock particles with the rotation of the cutterhead.And the accuracy and reliability of the CFD-DEM simulation results were validated via the field test and model test.Furthermore,a comprehensive parameter analysis was conducted to examine the effects of TBM operating parameters,the geometric design of screw conveyor and the size of rocks on the discharging performance of short screw conveyor.Accordingly,a reasonable rotational speed of screw conveyor was suggested and applied to Jiaozhou Bay Second Undersea Tunnel project.The findings in this paper could provide valuable references for addressing the excavation chamber clogging during ultra-large-diameter slurry TBM tunneling in hard rock for similar future.
基金Supported by The National Natural Science Foundation of China(41504076)Jilin Science and Technological Development Program(20180101093JC)。
文摘By determining the distribution and extent of geological structures surrounding the Mingyan Tunnel,Xicheng Town,Helong City,Jilin Province,we can evaluate the stability of the rock mass and assess potential hazards during tunnel construction.We use the high-density resistivity method to analyze the subsurface structure of the study area.Conductive anomalies are likely to represent joint and fissure systems within strongly weathered host rocks,and the bedrock surrounding the tunnel is relatively stable and does not contain well-developed faults.High-density resistivity analysis can provide valuable information in the context of tunnel engineering and safety.
基金Supported by National Key R&D Program of China and Fundamental Research Funds for the Central Universities(2017YFC0601305)。
文摘The authors employ the high-density resistivity method to image the subsurface structure of a mountain in Erdaojiang District,Tonghua City,Jilin Province,China,to evaluate the potential risk of slope failure on surrounding residential areas and infrastructure,and identify a shallow fault that extends across the center of the mountain and is perpendicular to the mountain slope and accurately locate the spatial position and depth of another fault on the southern side of the mountain.The results provide an important basis for evaluating mountain slope stability.This study also demonstrates that the high-density resistivity method is effective for detecting mountain faults.
文摘The disaster of seawater intrusion seriously affects people's lives and restricts economic development,so the detection and treatment of seawater intrusion is a long-term task.On the basis of field investigation and water quality analysis,according to the change characteristics of apparent resistivity of groundwater after Cl-reaches 250 mg/L,the theoretical basis for the application of high-density resistivity method was determined,and the characteristic values of apparent resistivity for seawater intrusion interfaces in different geological characteristic regions in Laizhou Bay area were determined by typical profile tests.Combined with water quality investigation and other means,profiles for the high-density resistivity method were arranged,and the interfaces between saline and fresh water were accurately divided.
文摘High-density electrical method has been proved to be an effective method for probing shallow sedimentary layers.It is principally used to identify the boundary between the Quaternary soil layer and bedrock according to the vertical change of apparent resistivity.However,the artificial filling layer has the characteristics of heterogeneity and high porosity,which makes it challenging to detect the artificial filling layer by high-density electrical method.The key to solve this problem is to detect the difference of conductivity between the filling layer and the underlying bedrock.This paper takes the land in Chengjiangshan area of Huaibei City,Anhui Province as the detection target.On the basis of fully analyzing the physical properties of the artificial filling layer,two-dimensional high-density electrical survey and inversion are used to define the thickness of the artificial filling layer.The research shows that the highdensity resistivity method has obvious advantages in delineating the distribution of bedrock and the thickness of the filling layer,and the reliability of the high-density electrical method in the detection of the artificial filling layer,and delineates the scope of the filling layer is verified by the borehole data.
基金National Key R&D Program of China(2017YFC0601305)Fundamental Research Funds for the Central Universities.
文摘Some unfavorable geological conditions can affect the construction of tunnels.In order to evaluate the damage degree of tunnel construction and determine the surrounding rock grade and stability of the tunnel,the authors used high-density resistivity method to detect the surrounding rocks of Shimodong tunnel in Xicheng Town of Helong City.The underground resistivity structures of the entrance,exit and middle parts of the tunnel are obtained.Through analysis,it is found that there are no bedrock faults near the tunnel,although some joints and fissures are developed in some locations,which are characterized by low-resistivity anomalies.The tunnel structures are stable overall,favorable for safe and efficient construction.The study also proves the good application effect of the high-density resistivity method in tunnel safety detection.
基金projects of Jilin Provincial Institute of Cultural Relics and Archaeology(No.3S318B564423)National Key R&D Program of China(No.2017YFC0601305)Fundamental Research Funds for the Central Universities.
文摘The authors employ the high-density resistivity method during an archaeological investigation of Sumicheng site,an ancient city of the Tang Dynasty,to find evidence of human activities and locate a favorable target for archaeological excavation in the southern part of the outer city.There are two obvious high-resistivity structures,the south wall of the inner city and an ancient building near the south gate along the outer city wall,of which the resistivities are indicative of rammed soil foundations.The south wall of the inner city is continuous but is cut off abruptly to the east,which we suggest it is due to either wall damage or destruction.The resistivity signature of the target area is verified by archaeological excavation,proving the feasibility and effectiveness of implementing the high-density resistivity method for archaeological exploration.
基金Supported by International Science&Technology Cooperation Program of China(2013DFA61260)Sub-project of National Science and Technology Planning in Rural Areas during the 12th Five-year Plan(2011BAD36B01)~~
文摘In the research, pot experiment and field testing were conducted to study the effect of different crops, soil types, and irrigation modes on biogas slurry diges- tions. The results showed that when silage maize, sweet sorghum and Chinese cabbage were planted in purple soils, the quantities of digested biogas slurry were of 57, 157.5, and 34.5 t/hm2, respectively, while the quantities of digested biogas slurry were 70.5, 157.5 and 40.5 t/hm2 in yellow soils. Besides, the digested biogas slurries reached 36 and 27 t/hm2 as per flood irrigation and sprinkling irrigation when Chinese cabbages were planted in yellow soils. The research indicated crop variety, soil type, and irrigation method all have effects on farmland digestion of biogas slurry.
基金Projects(41074085,41374118)supported by the National Natural Science Foundation of ChinaProject(20120162110015)supported by Doctoral Fund of Ministry of Education of ChinaProject(NCET-12-0551)supported by Program for New Century Excellent Talents in University,China
文摘The 2D data processing adopted by the high-density resistivity method regards the geological structures as two degrees, which makes the results of the 2D data inversion only an approximate interpretation;the accuracy and effect can not meet the precise requirement of the inversion. Two typical models of the geological bodies were designed, and forward calculation was carried out using finite element method. The forward-modeled profiles were obtained. 1% Gaussian random error was added in the forward models and then 2D and 3D inversions using a high-density resistivity method were undertaken to realistically simulate field data and analyze the sensitivity of the 2D and 3D inversion algorithms to noise. Contrast between the 2D and 3D inversion results of least squares inversion shows that two inversion results of high-density resistivity method all can basically reflect the spatial position of an anomalous body. However, the 3D inversion can more effectively eliminate the influence of interference from Gaussian random error and better reflect the distribution of resistivity in the anomalous bodies. Overall, the 3D inversion was better than 2D inversion in terms of embodying anomalous body positions, morphology and resistivity properties.
基金Supported by Key Projects in the National Science & Technology Pillar Program during the Twelfth Five-year Plan Period(2012BAJ21B04-04)Shandong Environment Bottlenecks Analysis Project(SDHBPJ-ZB-05)~~
文摘To study the effects of different storage methods and time on content of nutrients in biogas slurry of straw, two storage methods were carried out on biogas slurry between open storage and airtight storage conditions at normal atmospheric temperature. The contents of N, P, K, and organic matter in biogas slurry of straw were determined in different storage times. The results showed that： during the pro-cess of biogas slurry storage, little change occurred in the content of the organic matter while the total content of N, P, K significantly declined; up to 50 days, the total content of N, P, K reduced to nearly 80%-90%. Because the contents of N, P, K in biogas slurry reduced less in airtight storage conditions so that a better re-sult was found on airtight storage methods than open storage methods in fertilizer field of biogas slurry of straw.
基金financial support from the National Natural Science Foundation of China(Grant Nos.52022053 and 51879153)the China National Postdoctoral Program for Innovative Talents(Grant No.BX2021172)。
文摘It is difficult to temporally and spatially track and characterize the slurry viscosity in flowing water during grouting simulation.In this study,a sequential flow and solidification(SFS)method considering the spatial-temporal evolution of slurry viscosity in flowing water in karst conduit is proposed.First,a time-dependent model for the threshold function of slurry viscosity is established.During the grouting process,the spatial-temporal evolution of slurry viscosity is revealed by tracking the diffusion behavior of the slurry injected at different times.This method is capable of describing the gradual solidification process of the slurry during grouting.Furthermore,a physical model of grouting in a karst conduit is developed.Second,the effectiveness of the SFS method in grouting simulation is verified by the experiment of grouting conduit in flowing water.The SFS method enables real-time monitoring of fluid velocity and pressure during grouting in flowing water and provides a feasible calculation method for revealing the grouting plugging mechanism in complex karst conduits at different engineering scales.In addition,it can be used to guide the design of grouting tests in flowing water,improve cost efficiency,and provide theoretical basis for optimizing grouting design and slurry selection.
基金Project(11272359)supported by the National Natural Science Foundation of China
文摘The particle simulation method is used to solve free-surface slurry flow problems that may be encountered in several scientific and engineering fields.The main idea behind the use of the particle simulation method is to treat granular or other materials as an assembly of many particles.Compared with the continuum-mechanics-based numerical methods such as the finite element and finite volume methods,the movement of each particle is accurately described in the particle simulation method so that the free surface of a slurry flow problem can be automatically obtained.The major advantage of using the particle simulation method is that only a simple numerical algorithm is needed to solve the governing equation of a particle simulation system.For the purpose of illustrating how to use the particle simulation method to solve free-surface flow problems,three examples involving slurry flow on three different types of river beds have been considered.The related particle simulation results obtained from these three examples have demonstrated that:1) The particle simulation method is a promising and useful method for solving free-surface flow problems encountered in both the scientific and engineering fields;2) The shape and irregular roughness of a river bed can have a significant effect on the free surface morphologies of slurry flow when it passes through the river bed.
基金the R&D project, titled " Creating a Marine Clay Matrix with Incineration Bottom Ash (IBA) for Land Reclamation " (Wu et al., 2014), under the Innovation for Environmental Sustainability (IES) Fund from National Environment Agency (NEA) of Singapore (ETO/CF/3/1)
文摘In this paper, the effectiveness, applicability and validity of chemicalephysical combined methods（CPCMs） for treatment of marine clay （MC） slurries were evaluated. The method CPCM1 combineschemical stabilization and vacuum preloading （VP）, while CPCM2 is similar to CPCM1 but includes boththe application of surcharge and use of geo-bags to provide confinement during surcharge preloading.The key advantage of CPCM2 using geo-bags is that the surcharge can be immediately applied on thechemically stabilized slurries. Two types of geo-bags were investigated under simulated land filling anddyke conditions, respectively. The test results show that the shear strength （cu） of treated slurry byCPCM2 is generally much higher than that by CPCM1. Besides, the use of CPCM2 can significantly reducethe treatment time due to the short drainage paths created by geo-bags. Overall, CPCM2 allows fasterconsolidation and higher preloading that help to achieve higher mechanical properties of the stabilizedslurry. There are consistent relationships between cU and water content of slurries treated by CPCM2.Several important observations were also made based on comparisons of experimental data. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.
基金We acknowledge the financial support for this work provided by the National Natural Science Foundation of China(Grant No.51774010)National Key R&D Program of China(Grant No.2019YF1904304).
文摘The filling mining method is important in realizing the green mining of mineral resources.Aiming at the problems of land resource occupation,environmental pollution,and rational utilization of coal-based solid wastes such as coal gangue,fly ash,and desulfurization gypsum,a new paste filling material was developed with coal gangue,fly ash,and desulfurization gypsum as raw materials.The microstructure of the raw materials was analyzed by XRD and SEM.Combined with the Box-Behnken experimental design,the effect of each component on the fluidity of the filling slurry was analyzed through the response surface analysis.The significance of each component on its bleeding and fluidity was determined,and the optimal ratio of the filling slurry was obtained.Experimental results show that the microcosmic morphology of coal gangue,desulfurization gypsum,and gasification slag presents an irregular block and rough particle surface;the microcosmic morphology of fly ash and bottom slag presents first out spherical or quasi spherical particles.Moreover,obvious sintering traces exist on the surface of the bottom slag.The main crystal mineral of coal gangue and fly ash is SiO_(2),the desulfurization gypsum is composed of Ca(SO_(4))(H_(2)O)and Ca(CO_(3))crystal minerals,the gasification slag is composed of carbon and nitrogen compounds,and the main crystal mineral components in the bottom slag sample are SiO_(2) and Al_(x)Si_(y)O_(z) compounds.The order of significance of each key factor on slurry fluidity is as follows:C(desulfurization gypsum)>D(gasification slag and bottom slag 1:1)>A(coal gangue)>B(fly ash).The order of the significance of each key factor on slurry bleeding is as follows:B(fly ash)>C(desulfurization gypsum)>D(gasification slag and bottom slag 1:1)>A(coal gangue).Considering the material preparation,field application,and other conditions,the mass percentage of each factor content of the new paste filling material is as follows:49.5%coal gangue,8.3%fly ash,4.1%desulfurization gypsum,6.2%gasification slag,and 6.2%bottom slag.
基金Item Sponsored by Grant-in-Aid for Young Scientists (B) (No.21760597) from the Japan Society for the Promotion of Science (JSPS)
文摘Rheocasting with semi-solid slurry has been widely used in industrial processes in recent years.The Cup-Cast method is one of the most effective ways to produce semi-solid slurry for rheocasting.In order to study the effect of electromagnetic stirring on the fabrication of semi-solid slurry,we have applied the Double-Axis-Electromagnetic Stirrer(DAEMS)to the Cup-Cast method.Microstructure of the slurry was observed by an optical microscope and Electron Back-Scatter Patterns(EBSP).The results indicated that the electromagnetic stirrer made it possible to accelerate the cooling rate of the melt,thus resulting in a higher quality slurry.
文摘The slurry method is one of the oldest techniques of deposition of aluminide coating on the nickel superalloy, titanium alloys and steel. It is characterized by relatively low costs of its realisation and necessary equipment. This method en-ables a simple modification of chemical composition of the coating through addition of different powders. The author showed study on the possibility of modification of the Al-Si slurry chemical composition used for aluminide coating deposition by addition of MeCrAlY powder. The slurry was deposited by immersion than the diffusion treatment at 950℃ for two hours was applied. The thickness of obtained coatings was in the range of 30 - 65 μm.
基金the National Natural Science Foundation of China(No.51108268)the Program for Changjiang Scholars and Innovative Research Team in University(PCSIRT,IRT1029)the Key Technol-ogy Research on Qianjiang Tunnel Project(No.2009-35333340)
文摘As the dimension of the slurry shield is greatly increasing, more and more attention is paid to the face stability of slurry shield-driven tunnel in recently years. A reduced-scale slurry shield model test is carried out based on the background of Qianjiang River Tunnel and Shanghai Yangtze River Tunnel. The results of the model test are presented in this paper with particular emphasis on the slurry shield driving parameters and the critical slurry pressure of the excavating face. It is shown that the behavior of large slurry shield-driving induced by the cutting face is mostly decided by the fluctuation of the slurry pressure in the chamber, and a smaller slurry pressure fluctuation range is presented according to the results of the physical model test. Especially, it is more difcult to control the machine in sandy silt than that in soft clay and muddy clay. The chamber pressure will fluctuate greatly when excavating in high permeability ground, and the gradient of accumulation of the flux diference could be used to evaluate the face balance of the slurry shield excavation.
基金Supported by the National-Natural Science Foundation of China （No.20406013） and Program for New Century Excellent Talents in University （No.NCET-04-0107）.
文摘The vaporization ratios of the slurry at various temperature and partial pressure were calculated with the group-contribution method,and then the phase state of the slurry in the residue fluid catalytic cracking(RFCC) disengager was determined.This research could provide some advices on how to select the technological conditions to decrease the coking in the RFCC disengager.The oil gas temperature and the slurry partial pressure had signifi- cant effects on the vaporization ratio of the slurry.Increasing the oil gas temperature and reducing the slurry partial pressure could effectively slow down the coking speed in the RFCC disengager.According to the calculation results, a correlation was established to predict the vaporization ratio of the slurry under different operating conditions.
基金the Natural Sciences and Engineering Research Council of Canada for providing financial assistance
文摘The main objective of this study was to determine the desiccation behavior of clay slurries. A clay slurry with high water adsorption capacity(W_L = 180%,W_P 60%,W_s = 20) was used to determine the soil water characteristic curve(SWCC), shrinkage curve, and hydraulic conductivity. The last parameter was determined similar to the Instantaneous Profile Method using evaporation tests. Results indicated that the clay slurry had an air entry value(AEV) of 1000 kPa and a residual suction of 5000 kPa that occurred at the plastic limit and the shrinkage limit, respectively. The discrepancy between theoretical and measured shrinkage limit was due to the gradual increase in clay particle contact. Unlike soils, the saturated hydraulic conductivity varied by two orders of magnitude(4×10 ~10 m/s at 20 kPa to 3 x 10 ~12 m/s at AEV). The unsaturated k further decreased to 10 ~14 m/s at 6 x 10~4 kPa beyond which vapor flow took place.
文摘In this experiment, the contents of serum total cholesterol (TC), triglyceride(TG),low-density lipoprotein(LDL), high-density lipoprotein(HDL) were used as indexes to observe the effects of warming-reinforcing method on rabbit’s lipide, liopoprotein. The results indicated that in the warming-reinforcing group, TC decreased markedly and HDL increased obviously with significant difference as compared with the twirling-reinforcing group:TC and LDL also decreased, but no significant differencte as compared with the twirling-reinforcing group. Warming-reinforcing method can decrease lipids more effectively than twirling-reinforcing method.
