It is found that the incorporation of Nitrite Corrosion Inhibitor (NCI) greatly weakens the resistance of mixtures to sulfate attack. To study the mechanism of this phenomenon, in this paper, the influence of NCI add...It is found that the incorporation of Nitrite Corrosion Inhibitor (NCI) greatly weakens the resistance of mixtures to sulfate attack. To study the mechanism of this phenomenon, in this paper, the influence of NCI addition on the cement paste and microstructure change of high performance concrete specimens is studied by means of quantitative XRD, SEM tests. The results demonstrate that the incorporation of NCI accelerates the formation of calcium hydroxide and ettringite crystals, and weakens the pore refinement effect caused by the secondary hydration reaction of fly ash and microsilica. At the age up to one year, the relative crystal quantity in mixture containing NCI is always higher than that in control mixture. The reasons for the degradation in sulfate resistance of mixtures may be attributed to the increase and stability of the calcium hydroxide and ettringite crystals formed and the weakening of secondary hydration reaction. Based on the results, conclusion can be drawn that NCI should be used cautiously in practical engineering where high resistance to sulfate attack is required. (Author abstract) 7 Refs.展开更多
The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative conti...The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.展开更多
Rechargeable magnesium batteries(RMBs)possess the merits of greater theoretical capacity,cheaper magnesium metal and not easily producing branched crystals,and greater safety.Therefore,the current researches mainly co...Rechargeable magnesium batteries(RMBs)possess the merits of greater theoretical capacity,cheaper magnesium metal and not easily producing branched crystals,and greater safety.Therefore,the current researches mainly concentrate on the exploration of high-performance RMBs in the initial stage,but still face many gigantic challenges.Herein,petal-shaped nanorods CoS/CuS materials are successfully synthesized as RMBs cathode materials through a two-step metal sulfide template-free solvent-thermal synthesis method,which can effectively improve the reaction kinetics due to the petal-like nano-structure and provide rich electrochemically active sites to decrease the transport barrier of Mg^(2+),thus contributing to the enhancement of the reaction kinetics of magnesium storage in RMBs.The electrochemical performance test illustrates that CoS/CuS composite nanomaterials can considerably improve the charging and discharging specific capacity of the batteries as well as the voltage of the batteries due to the existing synergistic effect between them.The specific capacity of CoS/CuS cathode still can still be maintained as high as 62.8 mAh g^(−1)after 300 cycles at 200 mA g^(−1).And the specific capacity of this electrode material changes from 180.6 mAh g^(−1)to 30 mAh g^(−1)at the current densities from 100 mA g^(−1)to 1000 mA g^(−1),and when the current density is restored to 100 mA g^(−1),the specific capacity gradually recovered to 178.6 mAh g^(−1),which showed better rate performance and ultra-high cycling stability.This work highlights how the introduction of CuS into CoS nanostructures can benefit the reversibility and cyclicity of the magnesium storage reaction and offers an original and practical route for the modification of RMBs electrode materials with good electrochemical properties.展开更多
Bi/Bi_(2)Fe_(4)O_(9)nanocomposites consisting of Bi_(2)Fe_(4)O_(9)nanosheets decorated with Bi nanodots were synthesized by a hydrothermal method.The formation of Bi nanodots on the Bi_(2)Fe_(4)O_(9)nanosheet surfaces...Bi/Bi_(2)Fe_(4)O_(9)nanocomposites consisting of Bi_(2)Fe_(4)O_(9)nanosheets decorated with Bi nanodots were synthesized by a hydrothermal method.The formation of Bi nanodots on the Bi_(2)Fe_(4)O_(9)nanosheet surfaces was attributed to the reducibility of 2-methoxyethanol in the precursor solution.Comparative photocatalytic evaluation reveals that the Bi/Bi_(2)Fe_(4)O_(9)nanocomposites significantly enhance the degradation efficiency(99.0%)of bisphenol A compared with Bi_(2)Fe_(4)O_(9)nanosheets(64.2%)under 120 min simulated solar irradiation.This remarkable enhancement can be attributed to the established Bi/Bi_(2)Fe_(4)O_(9)heterojunction structure,which effectively facilitates the separation of photogenerated electron-hole pairs and accelerates interfacial charge transfer between the metallic Bi nanodots and semiconductor Bi_(2)Fe_(4)O_(9)nanosheets.The synergistic effects arising from this unique architecture ultimately lead to superior photocatalytic performance.展开更多
Developing advanced acoustic treatments,such as the Multi-Degree-of-Freedom(MDOF)septum liner,to realize the broadband noise reduction is critical for silent aeroengines.This study investigates experimentally the MDOF...Developing advanced acoustic treatments,such as the Multi-Degree-of-Freedom(MDOF)septum liner,to realize the broadband noise reduction is critical for silent aeroengines.This study investigates experimentally the MDOF septum liner and its impedance model on the Beihang Grazing Flow Duct(BGFD)setup,over a wide frequency range under grazing flows up to 0.5 Mach number and Sound Pressure Level(SPL)up to 150 dB,typically encountered in aeroengine nacelles.Several specimens varying in the numbers,types,and depths of septa among units are designed,fabricated,and measured.Their impedances and Transmission Losses(TL)are obtained using the mirror-based multimodal straightforward method and the mode decomposition technique,respectively.Generally,the model predictions show good agreement with the educed impedances in all cases,and such liners with a large-porosity facesheet exhibit low acoustic nonlinearities in the presence of high SPL,especially under high-velocity grazing flows.Moreover,a MDOF liner we delicately designed,compared with a conventional broadband three-layer perforated liner as the reference,is close to the resonant state at more frequencies and thus has higher and wider measured TL spectra almost from 1 kHz up to 10 kHz at studied Mach numbers,under the premise of saving 22.7 mm in the thickness.These show that,the MDOF septum liner,if well designed,can achieve an ultra-broadband efficient sound attenuation using more limited spaces in complex aeroacoustic environments.展开更多
The adsorptive denitrification performance of MIL-101(Cr)-0.5 toward pyridine,aniline or quinoline in simulated fuels with basic nitrogen content of 1732μg/g was evaluated separately.Furthermore,the effects of adsorp...The adsorptive denitrification performance of MIL-101(Cr)-0.5 toward pyridine,aniline or quinoline in simulated fuels with basic nitrogen content of 1732μg/g was evaluated separately.Furthermore,the effects of adsorption temperature,adsorption time and adsorbent dosage on their adsorptive denitrification performance were systematically investigated.The experimental results demonstrated that under a fixed adsorbent dosage of 0.05 g and a simulated fuel volume of 10 mL,the optimal removal efficiency for aniline was achieved at 30℃ within 30 min,whereas higher temperatures and longer times(40℃and 40 min)were required for effective removal of pyridine and quinoline.Density Functional Theory(DFT)calculations were conducted via Materials Studio(MS)software to study the adsorptive denitrification mechanism of MIL-101(Cr)toward these three basic nitrogen-containing compounds.The simulation calculation results revealed that the interaction between pyridine and MIL-101(Cr)primarily involved coordination adsorption.In contrast,the interaction between aniline or quinoline and MIL-101(Cr)proceeded mainly through coordination,with additional contributions fromπ-complexation and hydrogen bonding.The overall adsorption strength order is pyridine>aniline>quinoline.During the adsorption process,pyridine and quinoline transfer electrons to the MIL-101(Cr)surface through the H→C→N→Cr^(3+)pathway,while aniline transfers electrons to the MIL-101(Cr)surface through various pathways,including N→Cr^(3+),N→C→Cr^(3+)and N→H→O.Furthermore,adsorption kinetics studies indicated that the adsorption processes for all three basic nitrogen-containing compounds followed the quasi second order kinetic models.The experimental results on the effect of benzene on the adsorptive denitrification performance of MIL-101(Cr)-0.5 demonstrated that benzene exerted a more significant impact on the adsorption of aniline and quinoline.Finally,the adsorbent was regenerated using ethanol washing.It was found that MIL-101(Cr)-0.5 retained stable denitrification performance after two regeneration cycles.展开更多
To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content ...To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.展开更多
Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluatio...Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluation of their seismic performance is important and cannot be ignored.To investigate the seismic performance of large-sized high performance concrete cladding(HPCC),a series of full-scale experimental tests were conducted using a unidirectional shaking table.A steel supporting frame was used to install the HPCCs and reproduce the effects of the building under earthquake.The tests were divided into two parts:in-plane(IP)testing and out-plane(OP)testing.Three recorded accelerograms,one artificial accelerogram,and one sinusoidal accelerogram were used to conduct the shaking table tests.The results show that the maximum recorded IP responses of acceleration and interstory drift ratio were 1.04 g and 1/97,while the OP responses were 1.02 g and 1/51.The HPCCs functioned well throughout the entire experimental protocol.The fundamental frequency of the HPCCs systems rarely changed after the tests.展开更多
Purpose:ATLAS is a cross-sectional study aiming to investigate environmental and genetic determinants of athletic performance in healthy Greek competitive athletes(CA).This article presents the study design,investigat...Purpose:ATLAS is a cross-sectional study aiming to investigate environmental and genetic determinants of athletic performance in healthy Greek competitive athletes(CA).This article presents the study design,investigates the muscle strength performance(MSP)of 289 adult and teenage CA,exercisers,and physically inactive individuals(PI),and proposes predictive models of MSP for adults.Methods:Muscle maximal,speed,and explosive strength(MMS/MSS/MES)at unilateral maximal concentric flexion and extension contraction(FC/EC)were evaluated using Biodex System 3 PRO^(TM)at 60°/s,180°/s,and 300°/s,while additional performance markers were assessed through field ergometric testing.Participants were interviewed about their lifestyle,dietary habits,physical activity,injury,and medical history.Body composition was assessed via bioelectrical impedance.gDNA was extracted from biochemical samples and then genotyped.Statistical analysis was conducted using IBM SPSS Statistics v21.0 and R.Results:Age,fitness,and sex impacted correlations of MSP with body composition and anthropometric measurements(p<0.05).Among CA,females outperformed males in accuracy(p<0.001)while,males outperformed females in anaerobic power,MSP,speed,and endurance(p<0.001).Adult CA outperformed exercisers and PI in MMS,MSS,and MES(p<0.05).Multiple linear regression models,with predictors age,FFM,body extremity,training load explained the majority of variation in MMS(R^(2)_(adj):71.4%–88.9%),MSS(R^(2)_(adj):64.8%–78.4%),and MES(R^(2)_(adj):52.7%–68.4%)at EC,FC,and their mean(p<0.001).Conclusions:Muscle-strengthening strategies should be customized according to individual fitness levels,body composition,and anthropometric measurements.The innovative sex-specific regression models assessing MMS,MSS,and MES at EC and FC provide a framework for personalizing rehabilitation and skill-specific training strategies.展开更多
This study presents the development of high-performance,solvent-free polyurethane-urea(PU)elastomeric coatings engineered for rapid curing and precise sprayability.Utilizing polyoxytetramethylene glycol(PTMG)as the pr...This study presents the development of high-performance,solvent-free polyurethane-urea(PU)elastomeric coatings engineered for rapid curing and precise sprayability.Utilizing polyoxytetramethylene glycol(PTMG)as the primary polyol and a static-mixing spraying technique,the formulations were systematically optimized.It was found that a soft-segment content of 64% yields optimalmechanical properties,achieving a remarkable tensile strength exceeding 30 MPa.Crucially,the incorporation of an ultra-low concentration(0.002 wt%)of dibutyltin dilaurate catalyst was sufficient to enhance curing completeness and mechanical performance while effectively eliminating moisture-induced foaming,a common challenge in solvent-free spray applications.The gel and tack-free times were successfully reduced to the order of minutes through strategic formulation with the chain extender dimethylsulfidetoluene diamine,minimizing reliance on high catalyst loadings.Theresultant PTMG-based coatings exhibit exceptional comprehensive properties,including a tensile strength>30 MPa,elongation at break>400%,and a tear strength of 66 N/mm,significantly surpassing conventional polypropylene-diamine-based polyurea systems.Furthermore,the coatings demonstrated superior low-temperature flexibility,evidenced by a glass transition temperature of-53℃,and suppressed soft-segment crystallinity.The solvent-free nature and tunable curing kinetics of this system enable precise spraying on complex geometries,effectively overcoming thickness-control limitations for small-object applications.This work establishes a sustainable and high-performance coating solution ideal for demanding impact-and corrosionresistant protective layers.展开更多
The pursuit of symmetry has long shaped discussions in sports science,particularly in sprinting,where every fraction of a second counts.Yet,the human body is inherently asymmetrical–our hearts are slightly left,most ...The pursuit of symmetry has long shaped discussions in sports science,particularly in sprinting,where every fraction of a second counts.Yet,the human body is inherently asymmetrical–our hearts are slightly left,most favour one hand or foot,and limb lengths or joint flexibilities are rarely identical.This begs the question:Why do we insist that symmetry is essential for peak sprint performance?展开更多
Memristors have emerged as a transformative technology in the realm of electronic devices,offering unique advantages such as fast switching speeds,low power consumption,and the ability to sensor-memory-compute.The app...Memristors have emerged as a transformative technology in the realm of electronic devices,offering unique advantages such as fast switching speeds,low power consumption,and the ability to sensor-memory-compute.The applications span across non-volatile memory,neuromorphic computing,hardware security,and beyond,prompting memristors to become a versatile solution for next-generation computing and data storage systems.Despite enormous potential of memristors,the transition from laboratory prototypes to large-scale applications is challenging in terms of material stability,device reproducibility,and array scalability.This review systematically explores recent advancements in high-performance memristor technologies,focusing on performance enhancement strategies through material engineering,structural design,pulse protocol optimization,and algorithm control.We provide an in-depth analysis of key performance metrics tailored to specific applications,including non-volatile memory,neuromorphic computing,and hardware security.Furthermore,we propose a co-design framework that integrates device-level optimizations with operational-level improvements,aiming to bridge the gap between theoretical models and practical implementations.展开更多
In composite solid propellants with high aluminum(Al)content and low burning rate,incomplete combustion of the Al powder may occur.In this study,varying lithium(Li)content in Al-Li alloy powder was utilized instead of...In composite solid propellants with high aluminum(Al)content and low burning rate,incomplete combustion of the Al powder may occur.In this study,varying lithium(Li)content in Al-Li alloy powder was utilized instead of pure aluminum particles to mitigate agglomeration and enhance the combustion efficiency of solid propellants(Combustion efficiency herein refers to the completeness of metallic fuel oxidation,quantified as the ratio of actual-to-theoretical energy released during combustion)with high Al content and low burning rates.The impact of Al-Li alloy with different Li contents on combustion and agglomeration of solid propellant was investigated using explosion heat,combustion heat,differential thermal analysis(DTA),thermos-gravimetric analysis(TG),dynamic high-pressure combustion test,ignition experiment of small solid rocket motor(SRM)tests,condensation combustion product collection,and X-ray diffraction techniques(XRD).Compared with pure Al,Al-Li alloys exhibit higher combustion heat,which contributes to improved combustion efficiency in Al-Li alloy-containing propellants.DTA and TG analyses demonstrated higher reactivity and lower ignition temperatures for Al-Li alloys.High-pressure combustion experiments at 5 MPa showed that Al-Li alloy fuel significantly decreases combustion agglomeration.The results from theφ75 mm andφ165 mm SRM and XRD tests further support this finding.This study provides novel insights into the combustion and agglomeration behaviors of high-Al,low-burning-rate composite solid propellants and supports the potential application of Al-Li alloys in advanced propellant formulations.展开更多
The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-lear...The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.展开更多
In the era of materials genome engineering,data-driven machine learning has become a powerful tool for accelerating the re-search and development of metallic materials.However,the predictive accuracy and generalizatio...In the era of materials genome engineering,data-driven machine learning has become a powerful tool for accelerating the re-search and development of metallic materials.However,the predictive accuracy and generalization ability of traditional machine learning models are often limited by the scarcity and heterogeneity of available data,especially in small-sample scenarios.To address these chal-lenges,transfer learning has emerged as an effective strategy to leverage knowledge from related domains,thereby enhancing model per-formance with limited target data.This review systematically summarizes the fundamental concepts,methodologies,and representative applications of transfer learning in the prediction of metallic materials'properties.Transfer learning can be categorized into feature-based,instance-based,parameter-based,and knowledge-based methods.This work discusses their respective mechanisms,advantages,and limit-ations.Case studies demonstrate that transfer learning can significantly improve prediction accuracy,data efficiency,and model inter-pretability in tasks such as mechanical property prediction and alloy design.Furthermore,this work highlights emerging trends including hybrid,multi-task,meta,and adaptive transfer learning,which further expand the applicability of these techniques.Finally,this work out-lines future research directions,emphasizing the need for data standardization,algorithmic innovation,multimodal data fusion,and the in-tegration of physical principles to achieve robust,interpretable,and generalizable models.The perspectives presented aim to advance the intelligent design and discovery of metallic materials,promoting efficient knowledge transfer and collaborative innovation in materials science.展开更多
In the context of the revolution in new technologies,a key question is whether the rapid growth of the digital economy,driven by digital technologies,has improved regional innovation performance.Using inter-provincial...In the context of the revolution in new technologies,a key question is whether the rapid growth of the digital economy,driven by digital technologies,has improved regional innovation performance.Using inter-provincial panel data from China(2012–2022)and adopting a business environment perspective,this study applies a Panel Extended Regression Model(PERM),a Panel Simultaneous Equation Model(PSEM),and a Tobit-IV model to analyze how the development of the digital economy influences regional innovation.The results reveal a pronounced U-shaped relationship between the digital economy and the regional innovation performance at the provincial level in China,with the business environment serving as a significant mediator in this relationship.Moreover,regional innovation performance in China exhibits a“ratchet effect,”with the impact of the digital economy varying markedly across regions.While the eastern and western regions have entered an upward phase,whereby the digital economy boosts innovation,the central region displays a weaker effect.Further analysis indicates that the synergy between the business environment and the digital economy in driving innovation remains suboptimal.These findings were supported by robust checks.This study offers theoretical insights and empirical evidence that support the coordinated development of digital government and the digital factor market,as well as business environment reforms that are in alignment with the innovation demands of the digital era.展开更多
Al/NH_(4)CoF_(3)-Φ(Φ=0.5,1.0,1.5,2.0,and 3.0)binary composites and Al-NH_(4)CoF_(3)@P(VDF-HFP)ternary composites are fabricated via ultrasonication-assisted blending and electrostatic spraying.The effect of equivale...Al/NH_(4)CoF_(3)-Φ(Φ=0.5,1.0,1.5,2.0,and 3.0)binary composites and Al-NH_(4)CoF_(3)@P(VDF-HFP)ternary composites are fabricated via ultrasonication-assisted blending and electrostatic spraying.The effect of equivalence ratio(Φ)on the reaction properties is systematically investigated in the binary Al/NH_(4)CoF_(3)system.For ternary systems,electrostatic spraying allows both components to be efficiently encapsulated by P(VDF-HFP)and to achieve structural stabilization and enhanced reactivity through synergistic interfacial interactions.Morphological analysis using SEM/TEM revealed that P(VDF-HFP)formed a protective layer on Al and NH_(4)CoF_(3)particles,improving dispersion,hydrophobicity(water contact angle increased by 80.5%compared to physically mixed composites),and corrosion resistance.Thermal decomposition of NH_(4)CoF_(3)occurred at 265℃,releasing NH_(3)and HF,which triggered exothermic reactions with Al.The ternary composites exhibited a narrowed main reaction temperature range and concentrated heat release,attributed to improved interfacial contact and polymer decomposition.Combustion tests demonstrated that Al-NH_(4)CoF_(3)@P(VDF-HFP)achieved self-sustaining combustion.In addition,a simple validation was done by replacing the Al component in the aluminium-containing propellant,demonstrating its potential application in the propellant field.This work establishes a novel strategy for designing stable,high-energy composites with potential applications in advanced propulsion systems.展开更多
Isolation technology can reduce the type of structural damage that earthquakes cause.A new type of composite sliding-rolling friction composite seismic isolation bearing(SRF)with composite sliding friction and rolling...Isolation technology can reduce the type of structural damage that earthquakes cause.A new type of composite sliding-rolling friction composite seismic isolation bearing(SRF)with composite sliding friction and rolling friction is proposed.SRF is capable of realizing a parallel arrangement of sliding friction and rolling friction,and the coefficient of dynamic friction shows variability.The proposed static tests on composite bearings were conducted to investigate the effects of the number of shims,loading speed and vertical pressure on the dynamic friction factor.Test results show that the coefficient of dynamic friction first generally decreases and then increases with an increase in sliding speed,prior to again decreasing with an increase in vertical pressure.The dynamic friction factor increases and then decreases with an increase in the number of shims for a four-roll ball.It decreases and then increases with an increase in the number of shims for a five-roll ball.Based on finite element analysis,modeling and analyzing the effects of the coefficient of friction,the number of balls and the number of shims on the hysteresis performance of the support and derive its skeleton curve.The SRF hysteretic performance,dynamic friction factor and the number of rolling balls and shims show significant correlation.展开更多
Background The decline in reproductive performance of aged hens is mainly attributed to oxidative damage in reproductive organs,hepatic lipid metabolism disorders,and intestinal microbiota dysbiosis.Glycyrrhizin(GL)ha...Background The decline in reproductive performance of aged hens is mainly attributed to oxidative damage in reproductive organs,hepatic lipid metabolism disorders,and intestinal microbiota dysbiosis.Glycyrrhizin(GL)has been proven to enhance antioxidant capacity,regulate lipid metabolism and gut microbiota in mammals,but its efficacy in hens remains unclear.Hence,this study aimed to investigate whether dietary GL supplementation improves reproductive performance in hens during the late laying stage by modulating intestinal microbiota composition,hepatic lipid metabolism and ovarian antioxidant status.Results Dietary supplementation with 100 mg/kg GL significantly improved the egg production rate,egg quality,and hatching rate in aged breeder hens(P<0.05).GL supplementation also increased the serum levels of HDLC,TP and ALB,and enhanced the antioxidant capacity in both serum and ovary(P<0.05).In addition,dietary GL elevated the serum progesterone(P4)levels by enhancing the transcription level of steroid synthesis key enzymes(CYP11A1 and 3β-HSD)in the ovary(P<0.05).Dietary GL also promoted the synthesis and transport of vitellogenin(VTG)by upregulating the VTG-Ⅱ(P<0.05)and APOV1(P=0.077)expression levels in the liver,thereby increasing the number of grade follicles and small yellow follicles.Moreover,dietary GL enhanced hepatic fatty acidβ-oxidation by upregulating PPARαand CPT-I(P<0.05),and downregulating ACC expression levels(P<0.05).In agreement,liver metabolomics analysis revealed that dietary GL supplementation significantly altered hepatic metabolism,with 389 differentially identified metabolites(P<0.05).The key metabolites(e.g.,taurocholic acid,tauroursodeoxycholic acid,nicotinuric acid,glycodeoxycholic acid(hydrate))were identified,and they were mainly functionally enriched in betaalanine metabolism nicotinate,taurine and hypotaurine metabolism(P<0.05).Finally,16S rRNA gene sequencing revealed that dietary GL reversed age-induced changes in gut microbiota composition,characterized by a significant increase in Lactobacillus abundance and a decrease in Bacteroides(P<0.05).Conclusions These results collectively demonstrate that dietary supplementation with 100 mg/kg GL improved reproductive performance by reversing age-induced changes in gut microbiota,enhancing hepatic vitellogenin synthesis,and ameliorating ovarian function in aged breeder hens.This study suggests that dietary GL is a potential strategy to improve reproductive performance in broiler breeder hens during the late laying period.展开更多
Biochar and zero-valent iron are promising materials for the removal of trichloroethylene(TCE)from groundwater,but further research is still required on the synergistic mechanism and hydraulic performance in the perme...Biochar and zero-valent iron are promising materials for the removal of trichloroethylene(TCE)from groundwater,but further research is still required on the synergistic mechanism and hydraulic performance in the permeable reactive barriers(PRBs)with biochar-iron composites.In this work,biochar-iron composites were synthesized by two different methods,and subjected to the microscopic analysis,batch experiments and the PRB’s model tests.The results indicated that the removal rates of TCE on biochar-iron composites reached above 90%,and the optimal removal conditions were the initial pH of 6.0 and a biochar/iron mass ratio of 5:1.The removal of TCE on biochar-iron composites followed the pseudo-second-order and Freundlich models,and the maximum adsorption capacity of TCE was 25.95 mg/g.The adsorption of biochar and dechlorination of nZVI dominated the removal of TCE.Biochar significantly enhanced the dechlorination of TCE on nZVI through modifying the electrochemical characteristics to lower its corrosion potential of nZVI,promote direct electron transfer,and improve electronic transfer capability.M-5BC-1nZVI exhibited excellent hydraulic performance for maintaining an adequate permeability coefficient(10^(−6)to 10^(−5)m/s).展开更多
文摘It is found that the incorporation of Nitrite Corrosion Inhibitor (NCI) greatly weakens the resistance of mixtures to sulfate attack. To study the mechanism of this phenomenon, in this paper, the influence of NCI addition on the cement paste and microstructure change of high performance concrete specimens is studied by means of quantitative XRD, SEM tests. The results demonstrate that the incorporation of NCI accelerates the formation of calcium hydroxide and ettringite crystals, and weakens the pore refinement effect caused by the secondary hydration reaction of fly ash and microsilica. At the age up to one year, the relative crystal quantity in mixture containing NCI is always higher than that in control mixture. The reasons for the degradation in sulfate resistance of mixtures may be attributed to the increase and stability of the calcium hydroxide and ettringite crystals formed and the weakening of secondary hydration reaction. Based on the results, conclusion can be drawn that NCI should be used cautiously in practical engineering where high resistance to sulfate attack is required. (Author abstract) 7 Refs.
基金supported by the National Natural Science Foundation of China(Nos.U2341249,12005076,22205112)the Fundamental Research Funds for the Central Universities(No.2025201012)。
文摘The presence of a surface oxide film(B_(2)O_(3))on boron(B)particles significantly compromises their combustion efficiency and kinetic performance in fuel-rich solid propellants.This study proposes an innovative continuous modification strategy combining non-thermal plasma(NTP)etching with fluorocarbon passivation.Characterization and kinetic analysis revealed that reactive plasma species—including atomic hydrogen(H),electronically excited molecular hydrogen(H_(2)^(*)),vibrationally excited molecular hydrogen(H_(2)v),and hydrogen ions(H^(+))—dominate the reduction of B_(2)O_(3)through lowering the transition energy barrier and shifting the reaction spontaneity.Subsequent argon plasma fragmentation of C_(8)F_(18)generates fluorocarbon radicals that form conformal passivation coatings(thickness:7 nm)on purified boron surfaces.The modified boron particles exhibit 37.5℃lower exothermic peak temperature and 27.2%higher heat release(14.8 kJ/g vs.11.6 kJ/g)compared to untreated counterparts.Combustion diagnostics reveal 194%increase in maximum flame height(135.10 mm vs.46.03 mm)and 134%enhancement in flame propagation rate(4.44 cm/s vs.1.90 cm/s).This NTP-based surface engineering approach establishes a scalable pathway for developing highperformance boron-based energetic composites.
基金financially supported by the National Natural Science Foundation of China(Nos.21804008,52102209)the International Technological Collaboration Project of Shanghai(No.17520710300)+1 种基金Anhui Provincial Natural Science Foundation(No.2108085QE197)Guangdong Basic and Applied Basic Research Foundation(Nos.2022A1515010834,2020A1515110221).
文摘Rechargeable magnesium batteries(RMBs)possess the merits of greater theoretical capacity,cheaper magnesium metal and not easily producing branched crystals,and greater safety.Therefore,the current researches mainly concentrate on the exploration of high-performance RMBs in the initial stage,but still face many gigantic challenges.Herein,petal-shaped nanorods CoS/CuS materials are successfully synthesized as RMBs cathode materials through a two-step metal sulfide template-free solvent-thermal synthesis method,which can effectively improve the reaction kinetics due to the petal-like nano-structure and provide rich electrochemically active sites to decrease the transport barrier of Mg^(2+),thus contributing to the enhancement of the reaction kinetics of magnesium storage in RMBs.The electrochemical performance test illustrates that CoS/CuS composite nanomaterials can considerably improve the charging and discharging specific capacity of the batteries as well as the voltage of the batteries due to the existing synergistic effect between them.The specific capacity of CoS/CuS cathode still can still be maintained as high as 62.8 mAh g^(−1)after 300 cycles at 200 mA g^(−1).And the specific capacity of this electrode material changes from 180.6 mAh g^(−1)to 30 mAh g^(−1)at the current densities from 100 mA g^(−1)to 1000 mA g^(−1),and when the current density is restored to 100 mA g^(−1),the specific capacity gradually recovered to 178.6 mAh g^(−1),which showed better rate performance and ultra-high cycling stability.This work highlights how the introduction of CuS into CoS nanostructures can benefit the reversibility and cyclicity of the magnesium storage reaction and offers an original and practical route for the modification of RMBs electrode materials with good electrochemical properties.
基金Funded by the National Natural Science Foundation of China(No.50902108)。
文摘Bi/Bi_(2)Fe_(4)O_(9)nanocomposites consisting of Bi_(2)Fe_(4)O_(9)nanosheets decorated with Bi nanodots were synthesized by a hydrothermal method.The formation of Bi nanodots on the Bi_(2)Fe_(4)O_(9)nanosheet surfaces was attributed to the reducibility of 2-methoxyethanol in the precursor solution.Comparative photocatalytic evaluation reveals that the Bi/Bi_(2)Fe_(4)O_(9)nanocomposites significantly enhance the degradation efficiency(99.0%)of bisphenol A compared with Bi_(2)Fe_(4)O_(9)nanosheets(64.2%)under 120 min simulated solar irradiation.This remarkable enhancement can be attributed to the established Bi/Bi_(2)Fe_(4)O_(9)heterojunction structure,which effectively facilitates the separation of photogenerated electron-hole pairs and accelerates interfacial charge transfer between the metallic Bi nanodots and semiconductor Bi_(2)Fe_(4)O_(9)nanosheets.The synergistic effects arising from this unique architecture ultimately lead to superior photocatalytic performance.
基金co-supported by the National Natural Science Foundation of China(No.52206039)the Taihang Laboratory of China(No.A2053)+1 种基金the Aeronautical Science Foundation of China(No.20240011051001)the National Key R&D Program of China(No.2021YFB3703900)。
文摘Developing advanced acoustic treatments,such as the Multi-Degree-of-Freedom(MDOF)septum liner,to realize the broadband noise reduction is critical for silent aeroengines.This study investigates experimentally the MDOF septum liner and its impedance model on the Beihang Grazing Flow Duct(BGFD)setup,over a wide frequency range under grazing flows up to 0.5 Mach number and Sound Pressure Level(SPL)up to 150 dB,typically encountered in aeroengine nacelles.Several specimens varying in the numbers,types,and depths of septa among units are designed,fabricated,and measured.Their impedances and Transmission Losses(TL)are obtained using the mirror-based multimodal straightforward method and the mode decomposition technique,respectively.Generally,the model predictions show good agreement with the educed impedances in all cases,and such liners with a large-porosity facesheet exhibit low acoustic nonlinearities in the presence of high SPL,especially under high-velocity grazing flows.Moreover,a MDOF liner we delicately designed,compared with a conventional broadband three-layer perforated liner as the reference,is close to the resonant state at more frequencies and thus has higher and wider measured TL spectra almost from 1 kHz up to 10 kHz at studied Mach numbers,under the premise of saving 22.7 mm in the thickness.These show that,the MDOF septum liner,if well designed,can achieve an ultra-broadband efficient sound attenuation using more limited spaces in complex aeroacoustic environments.
基金Supported by Basic Scientific Research Project of the Liaoning Provincial Department of Education Has Been Unveiled to Facilitate Local Project Funding (JYTMS20230835)Enhanced Scientific Research Project Funded by the Departmentof Higher Education in Liaoning Province (General program)(JYTMS20230852)。
文摘The adsorptive denitrification performance of MIL-101(Cr)-0.5 toward pyridine,aniline or quinoline in simulated fuels with basic nitrogen content of 1732μg/g was evaluated separately.Furthermore,the effects of adsorption temperature,adsorption time and adsorbent dosage on their adsorptive denitrification performance were systematically investigated.The experimental results demonstrated that under a fixed adsorbent dosage of 0.05 g and a simulated fuel volume of 10 mL,the optimal removal efficiency for aniline was achieved at 30℃ within 30 min,whereas higher temperatures and longer times(40℃and 40 min)were required for effective removal of pyridine and quinoline.Density Functional Theory(DFT)calculations were conducted via Materials Studio(MS)software to study the adsorptive denitrification mechanism of MIL-101(Cr)toward these three basic nitrogen-containing compounds.The simulation calculation results revealed that the interaction between pyridine and MIL-101(Cr)primarily involved coordination adsorption.In contrast,the interaction between aniline or quinoline and MIL-101(Cr)proceeded mainly through coordination,with additional contributions fromπ-complexation and hydrogen bonding.The overall adsorption strength order is pyridine>aniline>quinoline.During the adsorption process,pyridine and quinoline transfer electrons to the MIL-101(Cr)surface through the H→C→N→Cr^(3+)pathway,while aniline transfers electrons to the MIL-101(Cr)surface through various pathways,including N→Cr^(3+),N→C→Cr^(3+)and N→H→O.Furthermore,adsorption kinetics studies indicated that the adsorption processes for all three basic nitrogen-containing compounds followed the quasi second order kinetic models.The experimental results on the effect of benzene on the adsorptive denitrification performance of MIL-101(Cr)-0.5 demonstrated that benzene exerted a more significant impact on the adsorption of aniline and quinoline.Finally,the adsorbent was regenerated using ethanol washing.It was found that MIL-101(Cr)-0.5 retained stable denitrification performance after two regeneration cycles.
基金Supported by the Science and Technology Cooperation and Exchange special project of Cooperation of Shanxi Province(202404041101014)the Fundamental Research Program of Shanxi Province(202403021212333)+3 种基金the Joint Funds of the National Natural Science Foundation of China(U24A20555)the Lvliang Key R&D of University-Local Cooperation(2023XDHZ10)the Initiation Fund for Doctoral Research of Taiyuan University of Science and Technology(20242026)the Outstanding Doctor Funding Award of Shanxi Province(20242080).
文摘To elucidate the effect of calcite-regulated activated carbon(AC)structure on low-temperature denitrification performance of SCR catalysts,this work prepared a series of Mn-Ce/De-AC-xCaCO_(3)(x is the calcite content in coal)catalysts were prepared by the incipient wetness impregnation method,followed by acid washing to remove calcium-containing minerals.Comprehensive characterization and low-temperature denitrification tests revealed that calcite-induced structural modulation of coal-derived AC significantly enhances catalytic activity.Specifically,NO conversion increased from 88.3%of Mn-Ce/De-AC to 91.7%of Mn-Ce/De-AC-1CaCO_(3)(210℃).The improved SCR denitrification activity results from the enhancement of physicochemical properties including higher Mn^(4+)content and Ce^(4+)/Ce^(3+)ratio,an abundance of chemisorbed oxygen and acidic sites,which could strengthen the SCR reaction pathways(richer NH_(3)activated species and bidentate nitrate active species).Therefore,NO removal is enhanced.
基金National Key R&D Program of China under Grant No.2024YFD1600404。
文摘Severe failures of nonstructural components have occurred during previous earthquakes.Claddings are one of the most widely used nonstructural component and are installed in many modern buildings;therefore,an evaluation of their seismic performance is important and cannot be ignored.To investigate the seismic performance of large-sized high performance concrete cladding(HPCC),a series of full-scale experimental tests were conducted using a unidirectional shaking table.A steel supporting frame was used to install the HPCCs and reproduce the effects of the building under earthquake.The tests were divided into two parts:in-plane(IP)testing and out-plane(OP)testing.Three recorded accelerograms,one artificial accelerogram,and one sinusoidal accelerogram were used to conduct the shaking table tests.The results show that the maximum recorded IP responses of acceleration and interstory drift ratio were 1.04 g and 1/97,while the OP responses were 1.02 g and 1/51.The HPCCs functioned well throughout the entire experimental protocol.The fundamental frequency of the HPCCs systems rarely changed after the tests.
文摘Purpose:ATLAS is a cross-sectional study aiming to investigate environmental and genetic determinants of athletic performance in healthy Greek competitive athletes(CA).This article presents the study design,investigates the muscle strength performance(MSP)of 289 adult and teenage CA,exercisers,and physically inactive individuals(PI),and proposes predictive models of MSP for adults.Methods:Muscle maximal,speed,and explosive strength(MMS/MSS/MES)at unilateral maximal concentric flexion and extension contraction(FC/EC)were evaluated using Biodex System 3 PRO^(TM)at 60°/s,180°/s,and 300°/s,while additional performance markers were assessed through field ergometric testing.Participants were interviewed about their lifestyle,dietary habits,physical activity,injury,and medical history.Body composition was assessed via bioelectrical impedance.gDNA was extracted from biochemical samples and then genotyped.Statistical analysis was conducted using IBM SPSS Statistics v21.0 and R.Results:Age,fitness,and sex impacted correlations of MSP with body composition and anthropometric measurements(p<0.05).Among CA,females outperformed males in accuracy(p<0.001)while,males outperformed females in anaerobic power,MSP,speed,and endurance(p<0.001).Adult CA outperformed exercisers and PI in MMS,MSS,and MES(p<0.05).Multiple linear regression models,with predictors age,FFM,body extremity,training load explained the majority of variation in MMS(R^(2)_(adj):71.4%–88.9%),MSS(R^(2)_(adj):64.8%–78.4%),and MES(R^(2)_(adj):52.7%–68.4%)at EC,FC,and their mean(p<0.001).Conclusions:Muscle-strengthening strategies should be customized according to individual fitness levels,body composition,and anthropometric measurements.The innovative sex-specific regression models assessing MMS,MSS,and MES at EC and FC provide a framework for personalizing rehabilitation and skill-specific training strategies.
基金funded by the National Natural Science Foundation of China(No.U2330207)the presidential foundation of China Academy of Engineering Physics(No.YZJJZQ2024004).
文摘This study presents the development of high-performance,solvent-free polyurethane-urea(PU)elastomeric coatings engineered for rapid curing and precise sprayability.Utilizing polyoxytetramethylene glycol(PTMG)as the primary polyol and a static-mixing spraying technique,the formulations were systematically optimized.It was found that a soft-segment content of 64% yields optimalmechanical properties,achieving a remarkable tensile strength exceeding 30 MPa.Crucially,the incorporation of an ultra-low concentration(0.002 wt%)of dibutyltin dilaurate catalyst was sufficient to enhance curing completeness and mechanical performance while effectively eliminating moisture-induced foaming,a common challenge in solvent-free spray applications.The gel and tack-free times were successfully reduced to the order of minutes through strategic formulation with the chain extender dimethylsulfidetoluene diamine,minimizing reliance on high catalyst loadings.Theresultant PTMG-based coatings exhibit exceptional comprehensive properties,including a tensile strength>30 MPa,elongation at break>400%,and a tear strength of 66 N/mm,significantly surpassing conventional polypropylene-diamine-based polyurea systems.Furthermore,the coatings demonstrated superior low-temperature flexibility,evidenced by a glass transition temperature of-53℃,and suppressed soft-segment crystallinity.The solvent-free nature and tunable curing kinetics of this system enable precise spraying on complex geometries,effectively overcoming thickness-control limitations for small-object applications.This work establishes a sustainable and high-performance coating solution ideal for demanding impact-and corrosionresistant protective layers.
文摘The pursuit of symmetry has long shaped discussions in sports science,particularly in sprinting,where every fraction of a second counts.Yet,the human body is inherently asymmetrical–our hearts are slightly left,most favour one hand or foot,and limb lengths or joint flexibilities are rarely identical.This begs the question:Why do we insist that symmetry is essential for peak sprint performance?
基金supported by the National Key R&D Project from the Minister of Science and Technology(2024YFA1211500)the National Natural Science Foundation of China(Grant Nos.62304130,62405158 and 62574123)+1 种基金the Shanghai youth science and technology star project(24QA2702800)Shanghai Key Laboratory of Chips and Systems for Intelligent Connected Vehicle。
文摘Memristors have emerged as a transformative technology in the realm of electronic devices,offering unique advantages such as fast switching speeds,low power consumption,and the ability to sensor-memory-compute.The applications span across non-volatile memory,neuromorphic computing,hardware security,and beyond,prompting memristors to become a versatile solution for next-generation computing and data storage systems.Despite enormous potential of memristors,the transition from laboratory prototypes to large-scale applications is challenging in terms of material stability,device reproducibility,and array scalability.This review systematically explores recent advancements in high-performance memristor technologies,focusing on performance enhancement strategies through material engineering,structural design,pulse protocol optimization,and algorithm control.We provide an in-depth analysis of key performance metrics tailored to specific applications,including non-volatile memory,neuromorphic computing,and hardware security.Furthermore,we propose a co-design framework that integrates device-level optimizations with operational-level improvements,aiming to bridge the gap between theoretical models and practical implementations.
基金the National Natural Science Foundation of China(Grant No.U2441263)for financial support of this work。
文摘In composite solid propellants with high aluminum(Al)content and low burning rate,incomplete combustion of the Al powder may occur.In this study,varying lithium(Li)content in Al-Li alloy powder was utilized instead of pure aluminum particles to mitigate agglomeration and enhance the combustion efficiency of solid propellants(Combustion efficiency herein refers to the completeness of metallic fuel oxidation,quantified as the ratio of actual-to-theoretical energy released during combustion)with high Al content and low burning rates.The impact of Al-Li alloy with different Li contents on combustion and agglomeration of solid propellant was investigated using explosion heat,combustion heat,differential thermal analysis(DTA),thermos-gravimetric analysis(TG),dynamic high-pressure combustion test,ignition experiment of small solid rocket motor(SRM)tests,condensation combustion product collection,and X-ray diffraction techniques(XRD).Compared with pure Al,Al-Li alloys exhibit higher combustion heat,which contributes to improved combustion efficiency in Al-Li alloy-containing propellants.DTA and TG analyses demonstrated higher reactivity and lower ignition temperatures for Al-Li alloys.High-pressure combustion experiments at 5 MPa showed that Al-Li alloy fuel significantly decreases combustion agglomeration.The results from theφ75 mm andφ165 mm SRM and XRD tests further support this finding.This study provides novel insights into the combustion and agglomeration behaviors of high-Al,low-burning-rate composite solid propellants and supports the potential application of Al-Li alloys in advanced propellant formulations.
基金financially supported by the National Science Fund for Distinguished Young Scholars,China(No.52025041)the National Natural Science Foundation of China(Nos.52450003,U2341267,and 52174294)+1 种基金the National Postdoctoral Program for Innovative Talents,China(No.BX20240437)the Fundamental Research Funds for the Central Universities,China(Nos.FRF-IDRY-23-037 and FRF-TP-20-02C2)。
文摘The rapid advancements in computer vision(CV)technology have transformed the traditional approaches to material microstructure analysis.This review outlines the history of CV and explores the applications of deep-learning(DL)-driven CV in four key areas of materials science:microstructure-based performance prediction,microstructure information generation,microstructure defect detection,and crystal structure-based property prediction.The CV has significantly reduced the cost of traditional experimental methods used in material performance prediction.Moreover,recent progress made in generating microstructure images and detecting microstructural defects using CV has led to increased efficiency and reliability in material performance assessments.The DL-driven CV models can accelerate the design of new materials with optimized performance by integrating predictions based on both crystal and microstructural data,thereby allowing for the discovery and innovation of next-generation materials.Finally,the review provides insights into the rapid interdisciplinary developments in the field of materials science and future prospects.
基金supported by the National NaturalScience Foundation of China(Nos.52301029 and 52274359)the Fundamental Research Funds for the CentralUniversities,China(No.06500165)+2 种基金the Guangdong Basicand Applied Basic Research Foundation,China(No.2022A1515140006)Young Elite Scientists Sponsorship Program by CAST(No.2023QNRC001)Beijing Young Elite Scientists Sponsorship Program by BMES,China.
文摘In the era of materials genome engineering,data-driven machine learning has become a powerful tool for accelerating the re-search and development of metallic materials.However,the predictive accuracy and generalization ability of traditional machine learning models are often limited by the scarcity and heterogeneity of available data,especially in small-sample scenarios.To address these chal-lenges,transfer learning has emerged as an effective strategy to leverage knowledge from related domains,thereby enhancing model per-formance with limited target data.This review systematically summarizes the fundamental concepts,methodologies,and representative applications of transfer learning in the prediction of metallic materials'properties.Transfer learning can be categorized into feature-based,instance-based,parameter-based,and knowledge-based methods.This work discusses their respective mechanisms,advantages,and limit-ations.Case studies demonstrate that transfer learning can significantly improve prediction accuracy,data efficiency,and model inter-pretability in tasks such as mechanical property prediction and alloy design.Furthermore,this work highlights emerging trends including hybrid,multi-task,meta,and adaptive transfer learning,which further expand the applicability of these techniques.Finally,this work out-lines future research directions,emphasizing the need for data standardization,algorithmic innovation,multimodal data fusion,and the in-tegration of physical principles to achieve robust,interpretable,and generalizable models.The perspectives presented aim to advance the intelligent design and discovery of metallic materials,promoting efficient knowledge transfer and collaborative innovation in materials science.
基金National Social Science Fund of China(18KXS009)the Sichuan Provincial Soft Science Program(22JDR0261)the Sichuan University“From 0 to 1”Innovation Research Program(2021CXC10)。
文摘In the context of the revolution in new technologies,a key question is whether the rapid growth of the digital economy,driven by digital technologies,has improved regional innovation performance.Using inter-provincial panel data from China(2012–2022)and adopting a business environment perspective,this study applies a Panel Extended Regression Model(PERM),a Panel Simultaneous Equation Model(PSEM),and a Tobit-IV model to analyze how the development of the digital economy influences regional innovation.The results reveal a pronounced U-shaped relationship between the digital economy and the regional innovation performance at the provincial level in China,with the business environment serving as a significant mediator in this relationship.Moreover,regional innovation performance in China exhibits a“ratchet effect,”with the impact of the digital economy varying markedly across regions.While the eastern and western regions have entered an upward phase,whereby the digital economy boosts innovation,the central region displays a weaker effect.Further analysis indicates that the synergy between the business environment and the digital economy in driving innovation remains suboptimal.These findings were supported by robust checks.This study offers theoretical insights and empirical evidence that support the coordinated development of digital government and the digital factor market,as well as business environment reforms that are in alignment with the innovation demands of the digital era.
基金supported by the National Natural Science Foundation of China(No.51706105)。
文摘Al/NH_(4)CoF_(3)-Φ(Φ=0.5,1.0,1.5,2.0,and 3.0)binary composites and Al-NH_(4)CoF_(3)@P(VDF-HFP)ternary composites are fabricated via ultrasonication-assisted blending and electrostatic spraying.The effect of equivalence ratio(Φ)on the reaction properties is systematically investigated in the binary Al/NH_(4)CoF_(3)system.For ternary systems,electrostatic spraying allows both components to be efficiently encapsulated by P(VDF-HFP)and to achieve structural stabilization and enhanced reactivity through synergistic interfacial interactions.Morphological analysis using SEM/TEM revealed that P(VDF-HFP)formed a protective layer on Al and NH_(4)CoF_(3)particles,improving dispersion,hydrophobicity(water contact angle increased by 80.5%compared to physically mixed composites),and corrosion resistance.Thermal decomposition of NH_(4)CoF_(3)occurred at 265℃,releasing NH_(3)and HF,which triggered exothermic reactions with Al.The ternary composites exhibited a narrowed main reaction temperature range and concentrated heat release,attributed to improved interfacial contact and polymer decomposition.Combustion tests demonstrated that Al-NH_(4)CoF_(3)@P(VDF-HFP)achieved self-sustaining combustion.In addition,a simple validation was done by replacing the Al component in the aluminium-containing propellant,demonstrating its potential application in the propellant field.This work establishes a novel strategy for designing stable,high-energy composites with potential applications in advanced propulsion systems.
文摘Isolation technology can reduce the type of structural damage that earthquakes cause.A new type of composite sliding-rolling friction composite seismic isolation bearing(SRF)with composite sliding friction and rolling friction is proposed.SRF is capable of realizing a parallel arrangement of sliding friction and rolling friction,and the coefficient of dynamic friction shows variability.The proposed static tests on composite bearings were conducted to investigate the effects of the number of shims,loading speed and vertical pressure on the dynamic friction factor.Test results show that the coefficient of dynamic friction first generally decreases and then increases with an increase in sliding speed,prior to again decreasing with an increase in vertical pressure.The dynamic friction factor increases and then decreases with an increase in the number of shims for a four-roll ball.It decreases and then increases with an increase in the number of shims for a five-roll ball.Based on finite element analysis,modeling and analyzing the effects of the coefficient of friction,the number of balls and the number of shims on the hysteresis performance of the support and derive its skeleton curve.The SRF hysteretic performance,dynamic friction factor and the number of rolling balls and shims show significant correlation.
基金supported and funded by the National Key Research and Development Program of China(2023YFD1300801)the Agricultural Science and Technology Innovation Program in Chinese Academy of Agricultural Sciences(ASTIP-IAS-08)。
文摘Background The decline in reproductive performance of aged hens is mainly attributed to oxidative damage in reproductive organs,hepatic lipid metabolism disorders,and intestinal microbiota dysbiosis.Glycyrrhizin(GL)has been proven to enhance antioxidant capacity,regulate lipid metabolism and gut microbiota in mammals,but its efficacy in hens remains unclear.Hence,this study aimed to investigate whether dietary GL supplementation improves reproductive performance in hens during the late laying stage by modulating intestinal microbiota composition,hepatic lipid metabolism and ovarian antioxidant status.Results Dietary supplementation with 100 mg/kg GL significantly improved the egg production rate,egg quality,and hatching rate in aged breeder hens(P<0.05).GL supplementation also increased the serum levels of HDLC,TP and ALB,and enhanced the antioxidant capacity in both serum and ovary(P<0.05).In addition,dietary GL elevated the serum progesterone(P4)levels by enhancing the transcription level of steroid synthesis key enzymes(CYP11A1 and 3β-HSD)in the ovary(P<0.05).Dietary GL also promoted the synthesis and transport of vitellogenin(VTG)by upregulating the VTG-Ⅱ(P<0.05)and APOV1(P=0.077)expression levels in the liver,thereby increasing the number of grade follicles and small yellow follicles.Moreover,dietary GL enhanced hepatic fatty acidβ-oxidation by upregulating PPARαand CPT-I(P<0.05),and downregulating ACC expression levels(P<0.05).In agreement,liver metabolomics analysis revealed that dietary GL supplementation significantly altered hepatic metabolism,with 389 differentially identified metabolites(P<0.05).The key metabolites(e.g.,taurocholic acid,tauroursodeoxycholic acid,nicotinuric acid,glycodeoxycholic acid(hydrate))were identified,and they were mainly functionally enriched in betaalanine metabolism nicotinate,taurine and hypotaurine metabolism(P<0.05).Finally,16S rRNA gene sequencing revealed that dietary GL reversed age-induced changes in gut microbiota composition,characterized by a significant increase in Lactobacillus abundance and a decrease in Bacteroides(P<0.05).Conclusions These results collectively demonstrate that dietary supplementation with 100 mg/kg GL improved reproductive performance by reversing age-induced changes in gut microbiota,enhancing hepatic vitellogenin synthesis,and ameliorating ovarian function in aged breeder hens.This study suggests that dietary GL is a potential strategy to improve reproductive performance in broiler breeder hens during the late laying period.
基金supported by the National Key R&D Program of China(No.2023YFC3707900)the National Natural Science Foundation of China(No.51978157).
文摘Biochar and zero-valent iron are promising materials for the removal of trichloroethylene(TCE)from groundwater,but further research is still required on the synergistic mechanism and hydraulic performance in the permeable reactive barriers(PRBs)with biochar-iron composites.In this work,biochar-iron composites were synthesized by two different methods,and subjected to the microscopic analysis,batch experiments and the PRB’s model tests.The results indicated that the removal rates of TCE on biochar-iron composites reached above 90%,and the optimal removal conditions were the initial pH of 6.0 and a biochar/iron mass ratio of 5:1.The removal of TCE on biochar-iron composites followed the pseudo-second-order and Freundlich models,and the maximum adsorption capacity of TCE was 25.95 mg/g.The adsorption of biochar and dechlorination of nZVI dominated the removal of TCE.Biochar significantly enhanced the dechlorination of TCE on nZVI through modifying the electrochemical characteristics to lower its corrosion potential of nZVI,promote direct electron transfer,and improve electronic transfer capability.M-5BC-1nZVI exhibited excellent hydraulic performance for maintaining an adequate permeability coefficient(10^(−6)to 10^(−5)m/s).
