Low Young’s modulus and high yield strength are concurrently needed to meet the performance requirements of metallic implant materials.The single-objective performance-oriented alloy design strategies face challenges...Low Young’s modulus and high yield strength are concurrently needed to meet the performance requirements of metallic implant materials.The single-objective performance-oriented alloy design strategies face challenges in effectively addressing the inherent conflict between Young’s modulus and yield strength.In this study,we developed a machine learning model for multi-objective synergistic optimization of modulus and yield strength,successfully enabling simultaneous prediction of Young’s modulus and yield strength in the Ti-Zr-Hf-Nb-Ta-Mo-Sn alloy system.The critical features influencing the modulus and strength of the alloys were systematically analyzed and identified.Moreover,a series of complex concentrated alloy(CCAs)with low Young’s modulus and high yield strength were successfully prepared based on this model.The newly developed alloys exhibited a stable single-phase BCC(body-centered-cubic)structure with Young’s modulus in the range of 40–50 GPa,yield strength of 600–915MPa,and elastic admissible strain of approximately 1.5%.The multi-objective machine learning model developed in this study can synergistically optimize low Young’s modulus and high yield strength in complex alloys,providing a novel approach for the design of advanced biomedical alloys.展开更多
Rice culm carbohydrate transport can simultaneously affect grain filling and stem lodging resistance by regulating non-structural carbohydrate(NSC) and structural carbohydrate(SC) contents. However, the relationship b...Rice culm carbohydrate transport can simultaneously affect grain filling and stem lodging resistance by regulating non-structural carbohydrate(NSC) and structural carbohydrate(SC) contents. However, the relationship between carbohydrate transposition and culm strength is not well documented. Accordingly, a high-yielding hybrid rice cultivar(Y Liangyou 2) was tested under different N fertilization regimes at two locations, Taoyuan(a special high-yield eco-site), Yunnan province and Danyang(a representative eco-site of the middle and lower Yangtze), Jiangsu province, China. Significantly higher grain yield and basal stem strength were found at Taoyuan than Danyang under all N rates throughout the two-year experiment. At heading stage, soluble sugars, starch, cellulose and lignin contents of the basal culm at Taoyuan were significantly 132.0%, 73.7%, 1.2%, and 62.7% higher than those at Danyang, respectively. At 20 days after heading, soluble sugars and starch content at Taoyuan decreased significantly compared to Danyang, but lignin content remained higher. Culm carbohydrate transport to kernels at Taoyuan was significantly greater than that at Danyang, and the proportion of soluble sugars and starch was correspondingly 62.9%lower. However, the proportion of lignin and cellulose was 22.7% higher at Taoyuan than that at Danyang. Soluble sugars and starch partitioning were significantly reduced under an increased nitrogen application rate, but SC partitioning was little affected. There were significant positive correlations between basal culm bending stress and dry weight and cellulose and lignin proportions at both locations under all N rates, suggesting that the higher SC proportion at 20 days after heading was primarily responsible for culm strength.These results suggest that high-yielding rice populations with greater culm strength require both moderate NSC transport and greater SC accumulation.展开更多
To understand the high strain rate deformation mechanism and determine the grain size,strain rate and porosity dependent yield strength of nanocrystalline materials,a new mechanical model based on the deformation mech...To understand the high strain rate deformation mechanism and determine the grain size,strain rate and porosity dependent yield strength of nanocrystalline materials,a new mechanical model based on the deformation mechanism of nanocrystalline materials under high strain rate loading was developed.As a first step of the research,the yield behavior of the nanocrystalline materials under high strain rate loading was mainly concerned in the model and uniform deformation was assumed for simplification.Nanocrystalline materials were treated as composites consisting of grain interior phase and grain boundary phase,and grain interior and grain boundary deformation mechanisms under high strain rate loading were analyzed,then Voigt model was applied to coupling grain boundary constitutive relation with mechanical model for grain interior phase to describe the overall yield mechanical behavior of nanocrystalline materials.The predictions by the developed model on the yield strength of nanocrysatlline materials at high strain rates show good agreements with various experimental data.Further discussion was presented for calculation results and relative experimental observations.展开更多
The temperature dependence of critical strain for serrated yielding in high strength A1-Zn-Mg-Cu alloy may be divided into two temperature regions.Their temperature coefficients of critical strain will be negative and...The temperature dependence of critical strain for serrated yielding in high strength A1-Zn-Mg-Cu alloy may be divided into two temperature regions.Their temperature coefficients of critical strain will be negative and positive,respectively.展开更多
Increasing plant density is an effective way to enhance maize yield, but often increases lodging rate and severity, significantly elevating the risk and cost of maize production. Therefore, lodging is a major factor r...Increasing plant density is an effective way to enhance maize yield, but often increases lodging rate and severity, significantly elevating the risk and cost of maize production. Therefore, lodging is a major factor restricting future increases in maize yield through high-density planting. This paper reviewed previous research on the relationships between maize lodging rate and plant morphology, mechanical strength of stalks, anatomical and biochemical characteristics of stalks, root characteristics, damage from pests and diseases, environmental factors, and genomic characteristics. The effects of planting density on these factors and explored possible ways to improve lodging resistance were also analyzed in this paper. The results provide a basis for future research on increasing maize lodging resistance under high-density planting conditions and can be used to develop maize cultivation practices and lodging-resistant maize cultivars.展开更多
An analytical model is established to study the influence of lattice distortion and fraction of Hf on the yield strength of the BCC TiNbTaZrHfx multi-component high entropy alloys （HEAs）. Meanwhile, the mechanism of...An analytical model is established to study the influence of lattice distortion and fraction of Hf on the yield strength of the BCC TiNbTaZrHfx multi-component high entropy alloys （HEAs）. Meanwhile, the mechanism of solid solution strengthening caused by lattice distortion is also discussed in the HEA. The distorted unit cell is introduced to indicate the lattice distortion effects induced by the differences of the atomic size and shear modulus by doping other elements in Ti-based metal. The results show that the calculated values of the alloying yield strength considering the path of least resistance are obtained with regard to various grain sizes for the equiatomic TiNbTaZrHf HEA, which is well in line with the experimental results. Furthermore, it is predicted that the alloying yield strength is the largest value in the case of the same grain size for the Hf atomic fraction of 0.122. The meaningful modeling could provide a theoretical method to investigate the yield strength and alloying design of other BCC HEAs in the future.展开更多
Precipitation behavior of Ti in high strength steels was investigated by means of the equilibrium solid solubility theory. The contributions of Ti content to yield strength were calculated. The calculated results were...Precipitation behavior of Ti in high strength steels was investigated by means of the equilibrium solid solubility theory. The contributions of Ti content to yield strength were calculated. The calculated results were verified by the hot rolling experiment for C–Mn steel and C–Mn–Ti micro alloyed steel, respectively. The research results show that the precipitates are mainly Ti N at the higher temperature. With the decreasing temperature, the proportion of Ti C in precipitates increases gradually. When the temperature drops to 800 °C, Ti C will become predominant for the precipitation of Ti. When Ti content is less than 0.014%(mass fraction), Ti has little influence on the yield strength. When Ti content is in the range of 0.014%–0.03%(mass fraction), the yield strength of Ti micro alloyed steel is greatly increased, which leads to instability of the mechanical properties of the steel. Therefore, the design of Ti content in high strength steels should avoid this Ti content range. When Ti content is higher than 0.03%, the yield strength increases stably. In this experiment, when added Ti content was controlled in the range of 0.03%–0.05%, the contribution to the yield strength of Ti micro alloyed steel can reach about 92.44 MPa.展开更多
Complex concentrated alloys(CCAs)containing the L2_(1)phase are recognized for their exceptional strength and thermal stability,positioning them as strong candidates for transformative applications in aerospace,energy...Complex concentrated alloys(CCAs)containing the L2_(1)phase are recognized for their exceptional strength and thermal stability,positioning them as strong candidates for transformative applications in aerospace,energy,and structural sectors.This investigation delves into the AlFexNiTiV_(40-x)(x=0,10,20,30,35,40;at%)CCAs,aiming to unlock the synergistic potential of BCC and L2_(1)phases.By conducting an in-depth analysis of microstructure,phase behavior,and mechanical properties,the intricate relationships between chemistry,structure,and properties are illuminated within this alloy system.The Al_(15)Fe_(35)Ni_(3)0Ti_(15)V_(5)alloy demonstrates remarkable mechanical properties,achieving a yield strength of 2140.9 MPa and ultimate compressive strength of 2699.7 MPa,primarily through solid solution strengthening and precipitation hardening.Notably,its low lattice mismatches and nanoprecipitate strengthening yield an impressive specific yield strength at 600℃(245.2 MPa(g·cm^(-3))^(-1)).Phase modulation achieves the synergistic optimization of specific strengths at both room and high temperatures in CCAs containing the L2_(1)phase,opening new avenues for designing advanced lightweight and high strength alloys for elevated-temperature applications.展开更多
基金supported by the National Key Research and Development Program of China(Grant Nos.2022YFB4602101)the National Science Fund for Distinguished Young Scholars(Grant No.52225103)+7 种基金the National Natural Science Foundation−Outstanding Youth Foundation(Grant No.52322102)the Funds for International Cooperation and Exchange of the National Natural Science Foundation of China(Grant No.W2412068)the Joint Funds of the National Natural Science Foundation of China(U2441262)the“Ten Thousand Talent Program for Prestigious Teachers”(Grant No.ZYZZ2023001)the National Natural Science Foundation of China(Grant Nos.12335017,52271003,52471002)the National Science Foundation for Young Scientists of China(Grant Nos.52201171,52201172,52401203)the Financial Support from the Fundamental Research Fund for the Central Universities of China(Grant Nos.FRF-TP-22-001C2,FRF-TP-22-005C2,FRF-TP-24-05C)the China Nuclear Power Technology Research Institute Co.Ltd.,and the China heavy-duty gas turbin technology Co.Ltd.under the project of J721.
文摘Low Young’s modulus and high yield strength are concurrently needed to meet the performance requirements of metallic implant materials.The single-objective performance-oriented alloy design strategies face challenges in effectively addressing the inherent conflict between Young’s modulus and yield strength.In this study,we developed a machine learning model for multi-objective synergistic optimization of modulus and yield strength,successfully enabling simultaneous prediction of Young’s modulus and yield strength in the Ti-Zr-Hf-Nb-Ta-Mo-Sn alloy system.The critical features influencing the modulus and strength of the alloys were systematically analyzed and identified.Moreover,a series of complex concentrated alloy(CCAs)with low Young’s modulus and high yield strength were successfully prepared based on this model.The newly developed alloys exhibited a stable single-phase BCC(body-centered-cubic)structure with Young’s modulus in the range of 40–50 GPa,yield strength of 600–915MPa,and elastic admissible strain of approximately 1.5%.The multi-objective machine learning model developed in this study can synergistically optimize low Young’s modulus and high yield strength in complex alloys,providing a novel approach for the design of advanced biomedical alloys.
基金supported by the National Natural Science Foundation of China (31501268)National Key Research and Development Program of China (2016YFD0300501)+1 种基金National Key Technology R&D Program of China (2015BAC02B02)the Agricultural Science and Technology Innovation Program of CAAS (Y2016PT12, Y2016XT01)
文摘Rice culm carbohydrate transport can simultaneously affect grain filling and stem lodging resistance by regulating non-structural carbohydrate(NSC) and structural carbohydrate(SC) contents. However, the relationship between carbohydrate transposition and culm strength is not well documented. Accordingly, a high-yielding hybrid rice cultivar(Y Liangyou 2) was tested under different N fertilization regimes at two locations, Taoyuan(a special high-yield eco-site), Yunnan province and Danyang(a representative eco-site of the middle and lower Yangtze), Jiangsu province, China. Significantly higher grain yield and basal stem strength were found at Taoyuan than Danyang under all N rates throughout the two-year experiment. At heading stage, soluble sugars, starch, cellulose and lignin contents of the basal culm at Taoyuan were significantly 132.0%, 73.7%, 1.2%, and 62.7% higher than those at Danyang, respectively. At 20 days after heading, soluble sugars and starch content at Taoyuan decreased significantly compared to Danyang, but lignin content remained higher. Culm carbohydrate transport to kernels at Taoyuan was significantly greater than that at Danyang, and the proportion of soluble sugars and starch was correspondingly 62.9%lower. However, the proportion of lignin and cellulose was 22.7% higher at Taoyuan than that at Danyang. Soluble sugars and starch partitioning were significantly reduced under an increased nitrogen application rate, but SC partitioning was little affected. There were significant positive correlations between basal culm bending stress and dry weight and cellulose and lignin proportions at both locations under all N rates, suggesting that the higher SC proportion at 20 days after heading was primarily responsible for culm strength.These results suggest that high-yielding rice populations with greater culm strength require both moderate NSC transport and greater SC accumulation.
基金Project(10502025) supported by the National Natural Science Foundation of ChinaProject(101005) supported by Fok Ying Tong Education FoundationProject(BK2007528) supported by the Natural Science Foundation of Jiangsu Province,China
文摘To understand the high strain rate deformation mechanism and determine the grain size,strain rate and porosity dependent yield strength of nanocrystalline materials,a new mechanical model based on the deformation mechanism of nanocrystalline materials under high strain rate loading was developed.As a first step of the research,the yield behavior of the nanocrystalline materials under high strain rate loading was mainly concerned in the model and uniform deformation was assumed for simplification.Nanocrystalline materials were treated as composites consisting of grain interior phase and grain boundary phase,and grain interior and grain boundary deformation mechanisms under high strain rate loading were analyzed,then Voigt model was applied to coupling grain boundary constitutive relation with mechanical model for grain interior phase to describe the overall yield mechanical behavior of nanocrystalline materials.The predictions by the developed model on the yield strength of nanocrysatlline materials at high strain rates show good agreements with various experimental data.Further discussion was presented for calculation results and relative experimental observations.
文摘The temperature dependence of critical strain for serrated yielding in high strength A1-Zn-Mg-Cu alloy may be divided into two temperature regions.Their temperature coefficients of critical strain will be negative and positive,respectively.
基金supported by the National Basic Research Program of China (973 Program, 2015CB150401)the National Key Research and Development Program of China (2016YFD0300101)the National Maize Industrial Technology System, China
文摘Increasing plant density is an effective way to enhance maize yield, but often increases lodging rate and severity, significantly elevating the risk and cost of maize production. Therefore, lodging is a major factor restricting future increases in maize yield through high-density planting. This paper reviewed previous research on the relationships between maize lodging rate and plant morphology, mechanical strength of stalks, anatomical and biochemical characteristics of stalks, root characteristics, damage from pests and diseases, environmental factors, and genomic characteristics. The effects of planting density on these factors and explored possible ways to improve lodging resistance were also analyzed in this paper. The results provide a basis for future research on increasing maize lodging resistance under high-density planting conditions and can be used to develop maize cultivation practices and lodging-resistant maize cultivars.
基金support from the National Natural Science Foundation of China (No. 11372103 and 11572118)the Hunan Provincial Science Fund for Distinguished Young Scholars (No. 2015JJ1006)+1 种基金the Fok Ying-Tong Education Foundation, China (No. 141005)the project of Innovation-driven Plan of Central South University, the State Key Laboratory of Powder Metallurgy
文摘An analytical model is established to study the influence of lattice distortion and fraction of Hf on the yield strength of the BCC TiNbTaZrHfx multi-component high entropy alloys （HEAs）. Meanwhile, the mechanism of solid solution strengthening caused by lattice distortion is also discussed in the HEA. The distorted unit cell is introduced to indicate the lattice distortion effects induced by the differences of the atomic size and shear modulus by doping other elements in Ti-based metal. The results show that the calculated values of the alloying yield strength considering the path of least resistance are obtained with regard to various grain sizes for the equiatomic TiNbTaZrHf HEA, which is well in line with the experimental results. Furthermore, it is predicted that the alloying yield strength is the largest value in the case of the same grain size for the Hf atomic fraction of 0.122. The meaningful modeling could provide a theoretical method to investigate the yield strength and alloying design of other BCC HEAs in the future.
基金Project(U1460204) supported by the Joint Funds of The Iron and Steel Key Project,ChinaProject(2015020180) supported by the Natural Science Foundation of Liaoning Province,ChinaProject(N140704002) supported by the Fundamental Research Funds for the Central Universities,China
文摘Precipitation behavior of Ti in high strength steels was investigated by means of the equilibrium solid solubility theory. The contributions of Ti content to yield strength were calculated. The calculated results were verified by the hot rolling experiment for C–Mn steel and C–Mn–Ti micro alloyed steel, respectively. The research results show that the precipitates are mainly Ti N at the higher temperature. With the decreasing temperature, the proportion of Ti C in precipitates increases gradually. When the temperature drops to 800 °C, Ti C will become predominant for the precipitation of Ti. When Ti content is less than 0.014%(mass fraction), Ti has little influence on the yield strength. When Ti content is in the range of 0.014%–0.03%(mass fraction), the yield strength of Ti micro alloyed steel is greatly increased, which leads to instability of the mechanical properties of the steel. Therefore, the design of Ti content in high strength steels should avoid this Ti content range. When Ti content is higher than 0.03%, the yield strength increases stably. In this experiment, when added Ti content was controlled in the range of 0.03%–0.05%, the contribution to the yield strength of Ti micro alloyed steel can reach about 92.44 MPa.
基金supported by the National Natural Science Foundation of China(Nos.52301043 and 51871077)Guangdong Basic and Applied Basic Research Foundation(No.2021A1515012626),Shenzhen Knowledge Innovation Plan-Fundamental Research(Discipline Distribution)(No.JCYJ20180507184623297)+1 种基金Shenzhen Science and Technology Plan-Technology Innovation(No.KQJSCX20180328165656256)the Startup Foundation from Shenzhen(Nos.NA25501001,and NA11409005).
文摘Complex concentrated alloys(CCAs)containing the L2_(1)phase are recognized for their exceptional strength and thermal stability,positioning them as strong candidates for transformative applications in aerospace,energy,and structural sectors.This investigation delves into the AlFexNiTiV_(40-x)(x=0,10,20,30,35,40;at%)CCAs,aiming to unlock the synergistic potential of BCC and L2_(1)phases.By conducting an in-depth analysis of microstructure,phase behavior,and mechanical properties,the intricate relationships between chemistry,structure,and properties are illuminated within this alloy system.The Al_(15)Fe_(35)Ni_(3)0Ti_(15)V_(5)alloy demonstrates remarkable mechanical properties,achieving a yield strength of 2140.9 MPa and ultimate compressive strength of 2699.7 MPa,primarily through solid solution strengthening and precipitation hardening.Notably,its low lattice mismatches and nanoprecipitate strengthening yield an impressive specific yield strength at 600℃(245.2 MPa(g·cm^(-3))^(-1)).Phase modulation achieves the synergistic optimization of specific strengths at both room and high temperatures in CCAs containing the L2_(1)phase,opening new avenues for designing advanced lightweight and high strength alloys for elevated-temperature applications.
基金中央引导地方科技发展专项:高堡膜在新疆经济作物上的应用及推广(ZYYD2023C07)自治区重点研发项目(2021B02002-1)+1 种基金喀什地区科技计划专项-麦后复播棉花优质高产栽培技术研究及应用(KS2023004)Agricultural Key-scientific and Core-technological Project of Shaanxi Province(2024NYGG011)。
