In order to realize the high speed data acquisition and fast Fourier analysis, the paper put forward a kind of high speed data acquisition and analysis system based on FPGA, the system uses Cyclone series FPGA with hi...In order to realize the high speed data acquisition and fast Fourier analysis, the paper put forward a kind of high speed data acquisition and analysis system based on FPGA, the system uses Cyclone series FPGA with high-speed A/D converter, and use the fast Fourier custom analysis nucleation of Altera company, using the standard TCP/IP protocol communication with PC, match up the master machine based on Matlab GUI analysis software. We experiment high speed data acquisition and fast Fourier analysis for a plurality of groups of high frequency analog signals, at the same time the results display on the computer. The experimental results validate the fast Fourier analysis theory, and has realized the low cost, high performance data acquisition and analysis of the complete system design.展开更多
A field-programmable gate array(FPGA)based high-speed broadband data acquisition system is designed.The system has a dual channel simultaneous acquisition function.The maximum sampling rate is 500 MSa/s and bandwidth ...A field-programmable gate array(FPGA)based high-speed broadband data acquisition system is designed.The system has a dual channel simultaneous acquisition function.The maximum sampling rate is 500 MSa/s and bandwidth is200 MHz,which solves the large bandwidth,high-speed signal acquisition and processing problems.At present,the data acquisition system is successfully used in broadband receiver test systems.展开更多
The article proposes a new architecture based on RAID 0 tech in computer science for signal processing field to store high speed data. It is composed of SSD driven by FPGA, called SSD-based RAID on FPGA. This new arch...The article proposes a new architecture based on RAID 0 tech in computer science for signal processing field to store high speed data. It is composed of SSD driven by FPGA, called SSD-based RAID on FPGA. This new architecture features high storage rate, mass capacity and small volume, and it is an efficient solution to store high speed data. The article describes the construction of SRF in details, and shows the test result of a demo system based on the architecture.展开更多
In this paper, we present a background and theory of the effect of Surface Acoustic Wave (SAW) Filter Module (SFM) in-band ripple on high data rate communications parameters such as the Error Vector Magnitude (EVM). I...In this paper, we present a background and theory of the effect of Surface Acoustic Wave (SAW) Filter Module (SFM) in-band ripple on high data rate communications parameters such as the Error Vector Magnitude (EVM). In addition, we present analyses and statements for the choice of unbalanced S-parameters set of the SFM over balanced S-parameters set of the SFM in measurements and Agilent’s Advance Design System (ADS) Ptolemy simulations. A test and measurement setup using Agilent’s equipment will be presented.展开更多
A numerical control (NC) tool path of digital CAD model is widely generated as a set of short line segments in machining. However, there are three shortcomings in the linear tool path, such as discontinuities of tange...A numerical control (NC) tool path of digital CAD model is widely generated as a set of short line segments in machining. However, there are three shortcomings in the linear tool path, such as discontinuities of tangency and curvature, huge number of line segments, and short lengths of line segments. These disadvantages hinder the development of high speed machining. To smooth the linear tool path and improve machining efficiency of short line segments, this paper presents an optimal feed interpolator based on G^2 continuous Bézier curves for the linear tool path. First, the areas suitable for fitting are screened out based on the geometric characteristics of continuous short segments (CSSs). CSSs in every area are compressed and fitted into a G^2 Continuous Bézier curve by using the least square method. Then a series of cubic Bézier curves are generated. However, the junction between adjacent Bézier curves is only G^0 continuous. By adjusting the control points and inserting Bézier transition curves between adjacent Bézier curves, the G^2 continuous tool path is constructed. The fitting error is estimated by the second-order Taylor formula. Without iteration, the fitting algorithm can be implemented in real-time environment. Second, the optimal feed interpolator considering the comprehensive constraints (such as the chord error constraint, the maximum normal acceleration, servo capacity of each axis, etc.) is proposed. Simulation and experiment are conducted. The results shows that the proposed method can generate smooth path, decrease the amount of segments and reduce machining time for machining of linear tool path. The proposed research provides an effective method for high-speed machining of complex 2-D/3-D profiles described by short line segments.展开更多
Fault frequency of catenary is related to meteo-rological conditions. In this work, based on the historical data, catenary fault frequency and weather-related fault rate are introduced to analyse the correlation betwe...Fault frequency of catenary is related to meteo-rological conditions. In this work, based on the historical data, catenary fault frequency and weather-related fault rate are introduced to analyse the correlation between catenary faults and meteorological conditions, and further the effect of meteorological conditions on catenary oper-ation. Moreover, machine learning is used for catenary fault prediction. As with the single decision tree, only a small number of training samples can be classified cor-rectly by each weak classifier, the AdaBoost algorithm is adopted to adjust the weights of misclassified samples and weak classifiers, and train multiple weak classifiers. Finally, the weak classifiers are combined to construct a strong classifier, with which the final prediction result is obtained. In order to validate the prediction method, an example is provided based on the historical data from a railway bureau of China. The result shows that the mapping relation between meteorological conditions and catenary faults can be established accurately by AdaBoost algorithm. The AdaBoost algorithm can accurately predict a catenary fault if the meteorological conditions are provided.展开更多
The focus of this study is to explore the statis-tical distribution models of high-speed railway (HSR) train delays. Based on actual HSR operational data, the delay causes and their classification, delay frequency, nu...The focus of this study is to explore the statis-tical distribution models of high-speed railway (HSR) train delays. Based on actual HSR operational data, the delay causes and their classification, delay frequency, number of affected trains, and space–time delay distributions are discussed. Eleven types of delay events are classified, and a detailed analysis of delay distribution for each classifica-tion is presented. Models of delay probability delay prob-ability distribution for each cause are proposed. Different distribution functions, including the lognormal, exponen-tial, gamma, uniform, logistic, and normal distribution, were selected to estimate and model delay patterns. The most appropriate distribution, which can approximate the delay duration corresponding to each cause, is derived. Subsequently, the Kolmogorov–Smirnov (K–S) test was used to test the goodness of fit of different train delay distribution models and the associated parameter values. The test results show that the distribution of the test data is consistent with that of the selected models. The fitting distribution models show the execution effect of the timetable and help in finding out the potential conflicts in real-time train operations.展开更多
This paper introduces the design and development of a new computerized data acquisition system for the coal fired magnetohydrodynamical (MHD) electrical power generation experiments. Compared to the previous system, ...This paper introduces the design and development of a new computerized data acquisition system for the coal fired magnetohydrodynamical (MHD) electrical power generation experiments. Compared to the previous system, it has a higher sampling rate and an improved simultaneity performance. It also improves the data collection method and sensor design for the measurement of Faraday voltages and Faraday currents. The system has been successfully used in many regular MHD generator tests. It provides an excellent base for the future research and development of the Coal fired MHD electrical power generation.展开更多
When designing large-sized complex machinery products, the design focus is always on the overall per- formance; however, there exist no design theory and method based on performance driven. In view of the defi- ciency...When designing large-sized complex machinery products, the design focus is always on the overall per- formance; however, there exist no design theory and method based on performance driven. In view of the defi- ciency of the existing design theory, according to the performance features of complex mechanical products, the performance indices are introduced into the traditional design theory of ＂Requirement-Function-Structure＂ to construct a new five-domain design theory of ＂Client Requirement-Function-Performance-Structure-Design Parameter＂. To support design practice based on this new theory, a product data model is established by using per- formance indices and the mapping relationship between them and the other four domains. When the product data model is applied to high-speed train design and combining the existing research result and relevant standards, the corresponding data model and its structure involving five domains of high-speed trains are established, which can provide technical support for studying the relationships between typical performance indices and design parame- ters and the fast achievement of a high-speed train scheme design. The five domains provide a reference for the design specification and evaluation criteria of high speed train and a new idea for the train＇s parameter design.展开更多
Field Programmable Gate Array(FPGA),combined with ARM(Advanced RISC Machines) is increasingly employed in the portable data acquisition(DAQ) system for nuclear experiments to reduce the system volume and achieve power...Field Programmable Gate Array(FPGA),combined with ARM(Advanced RISC Machines) is increasingly employed in the portable data acquisition(DAQ) system for nuclear experiments to reduce the system volume and achieve powerful and multifunctional capacity.High-speed data transmission between FPGA and ARM is one of the most challenging issues for system implementation.In this paper,we propose a method to realize the high-speed data transmission by using the FPGA to acquire massive data from FEE(Front-end electronics) and send it to the ARM whilst the ARM to transmit the data to the remote computer through the TCP/IP protocol for later process.This paper mainly introduces the interface design of the high-speed transmission method between the FPGA and the ARM,the transmission logic of the FPGA,and the program design of the ARM.The theoretical research shows that the maximal transmission speed between the FPGA and the ARM through this way can reach 50 MB/s.In a realistic nuclear physics experiment,this portable DAQ system achieved 2.2 MB/s data acquisition speed.展开更多
文摘In order to realize the high speed data acquisition and fast Fourier analysis, the paper put forward a kind of high speed data acquisition and analysis system based on FPGA, the system uses Cyclone series FPGA with high-speed A/D converter, and use the fast Fourier custom analysis nucleation of Altera company, using the standard TCP/IP protocol communication with PC, match up the master machine based on Matlab GUI analysis software. We experiment high speed data acquisition and fast Fourier analysis for a plurality of groups of high frequency analog signals, at the same time the results display on the computer. The experimental results validate the fast Fourier analysis theory, and has realized the low cost, high performance data acquisition and analysis of the complete system design.
文摘A field-programmable gate array(FPGA)based high-speed broadband data acquisition system is designed.The system has a dual channel simultaneous acquisition function.The maximum sampling rate is 500 MSa/s and bandwidth is200 MHz,which solves the large bandwidth,high-speed signal acquisition and processing problems.At present,the data acquisition system is successfully used in broadband receiver test systems.
文摘The article proposes a new architecture based on RAID 0 tech in computer science for signal processing field to store high speed data. It is composed of SSD driven by FPGA, called SSD-based RAID on FPGA. This new architecture features high storage rate, mass capacity and small volume, and it is an efficient solution to store high speed data. The article describes the construction of SRF in details, and shows the test result of a demo system based on the architecture.
文摘In this paper, we present a background and theory of the effect of Surface Acoustic Wave (SAW) Filter Module (SFM) in-band ripple on high data rate communications parameters such as the Error Vector Magnitude (EVM). In addition, we present analyses and statements for the choice of unbalanced S-parameters set of the SFM over balanced S-parameters set of the SFM in measurements and Agilent’s Advance Design System (ADS) Ptolemy simulations. A test and measurement setup using Agilent’s equipment will be presented.
基金Supported by National Natural Science Foundation of China(Grant No.50875171)National Hi-tech Research and Development Program of China(863 Program,Grant No.2009AA04Z150)
文摘A numerical control (NC) tool path of digital CAD model is widely generated as a set of short line segments in machining. However, there are three shortcomings in the linear tool path, such as discontinuities of tangency and curvature, huge number of line segments, and short lengths of line segments. These disadvantages hinder the development of high speed machining. To smooth the linear tool path and improve machining efficiency of short line segments, this paper presents an optimal feed interpolator based on G^2 continuous Bézier curves for the linear tool path. First, the areas suitable for fitting are screened out based on the geometric characteristics of continuous short segments (CSSs). CSSs in every area are compressed and fitted into a G^2 Continuous Bézier curve by using the least square method. Then a series of cubic Bézier curves are generated. However, the junction between adjacent Bézier curves is only G^0 continuous. By adjusting the control points and inserting Bézier transition curves between adjacent Bézier curves, the G^2 continuous tool path is constructed. The fitting error is estimated by the second-order Taylor formula. Without iteration, the fitting algorithm can be implemented in real-time environment. Second, the optimal feed interpolator considering the comprehensive constraints (such as the chord error constraint, the maximum normal acceleration, servo capacity of each axis, etc.) is proposed. Simulation and experiment are conducted. The results shows that the proposed method can generate smooth path, decrease the amount of segments and reduce machining time for machining of linear tool path. The proposed research provides an effective method for high-speed machining of complex 2-D/3-D profiles described by short line segments.
基金supported by the Scientific and Technological Research and Development Program of China Railway Corporation under Grant N2018G023by the Science and Technology Projects of Sichuan Province under Grants 2018RZ0075
文摘Fault frequency of catenary is related to meteo-rological conditions. In this work, based on the historical data, catenary fault frequency and weather-related fault rate are introduced to analyse the correlation between catenary faults and meteorological conditions, and further the effect of meteorological conditions on catenary oper-ation. Moreover, machine learning is used for catenary fault prediction. As with the single decision tree, only a small number of training samples can be classified cor-rectly by each weak classifier, the AdaBoost algorithm is adopted to adjust the weights of misclassified samples and weak classifiers, and train multiple weak classifiers. Finally, the weak classifiers are combined to construct a strong classifier, with which the final prediction result is obtained. In order to validate the prediction method, an example is provided based on the historical data from a railway bureau of China. The result shows that the mapping relation between meteorological conditions and catenary faults can be established accurately by AdaBoost algorithm. The AdaBoost algorithm can accurately predict a catenary fault if the meteorological conditions are provided.
基金supported by the National Key R&D Plan (No.2017YFB1200701)National Nature Science Foundation of China (No.U1834209 and 71871188)the support of the Railways Technology Development Plan of China Railway Corporation (No.2016X008-J)supported by State Key Lab of Railway Control and Safety Open Topics Fund (No.RCS2019K007)
文摘The focus of this study is to explore the statis-tical distribution models of high-speed railway (HSR) train delays. Based on actual HSR operational data, the delay causes and their classification, delay frequency, number of affected trains, and space–time delay distributions are discussed. Eleven types of delay events are classified, and a detailed analysis of delay distribution for each classifica-tion is presented. Models of delay probability delay prob-ability distribution for each cause are proposed. Different distribution functions, including the lognormal, exponen-tial, gamma, uniform, logistic, and normal distribution, were selected to estimate and model delay patterns. The most appropriate distribution, which can approximate the delay duration corresponding to each cause, is derived. Subsequently, the Kolmogorov–Smirnov (K–S) test was used to test the goodness of fit of different train delay distribution models and the associated parameter values. The test results show that the distribution of the test data is consistent with that of the selected models. The fitting distribution models show the execution effect of the timetable and help in finding out the potential conflicts in real-time train operations.
文摘This paper introduces the design and development of a new computerized data acquisition system for the coal fired magnetohydrodynamical (MHD) electrical power generation experiments. Compared to the previous system, it has a higher sampling rate and an improved simultaneity performance. It also improves the data collection method and sensor design for the measurement of Faraday voltages and Faraday currents. The system has been successfully used in many regular MHD generator tests. It provides an excellent base for the future research and development of the Coal fired MHD electrical power generation.
基金Supported by National Natural Science Foundation of China(Grant Nos.51275432,51505390)Sichuan Application Foundation Projects(Grant No.2016JY0098)Independent Research Project of TPL(Grant No.TPL1501)
文摘When designing large-sized complex machinery products, the design focus is always on the overall per- formance; however, there exist no design theory and method based on performance driven. In view of the defi- ciency of the existing design theory, according to the performance features of complex mechanical products, the performance indices are introduced into the traditional design theory of ＂Requirement-Function-Structure＂ to construct a new five-domain design theory of ＂Client Requirement-Function-Performance-Structure-Design Parameter＂. To support design practice based on this new theory, a product data model is established by using per- formance indices and the mapping relationship between them and the other four domains. When the product data model is applied to high-speed train design and combining the existing research result and relevant standards, the corresponding data model and its structure involving five domains of high-speed trains are established, which can provide technical support for studying the relationships between typical performance indices and design parame- ters and the fast achievement of a high-speed train scheme design. The five domains provide a reference for the design specification and evaluation criteria of high speed train and a new idea for the train＇s parameter design.
文摘Field Programmable Gate Array(FPGA),combined with ARM(Advanced RISC Machines) is increasingly employed in the portable data acquisition(DAQ) system for nuclear experiments to reduce the system volume and achieve powerful and multifunctional capacity.High-speed data transmission between FPGA and ARM is one of the most challenging issues for system implementation.In this paper,we propose a method to realize the high-speed data transmission by using the FPGA to acquire massive data from FEE(Front-end electronics) and send it to the ARM whilst the ARM to transmit the data to the remote computer through the TCP/IP protocol for later process.This paper mainly introduces the interface design of the high-speed transmission method between the FPGA and the ARM,the transmission logic of the FPGA,and the program design of the ARM.The theoretical research shows that the maximal transmission speed between the FPGA and the ARM through this way can reach 50 MB/s.In a realistic nuclear physics experiment,this portable DAQ system achieved 2.2 MB/s data acquisition speed.
