Advanced oxidation processes have been widely studied for organic pollutants treatment in water,but the degradation performance of radical-dominated pathway was severely inhibited by the side reactions between the ani...Advanced oxidation processes have been widely studied for organic pollutants treatment in water,but the degradation performance of radical-dominated pathway was severely inhibited by the side reactions between the anions and radicals,especially in high salinity conditions.Here,a singlet oxygen(^(1)O_(2))-dominated non-radical process was developed for organic pollutants degradation in high salinity wastewater,with layered crednerite(CuMnO_(2))as catalysts and peroxymonosulfate(PMS)as oxidant.Based on the experiments and density functional theory calculations,^(1)O_(2)was the dominating reactive species and the constructed Cu-O-Mn with electron-deficient Mn captured electron from PMS promoting the generation of^(1)O_(2).The rapid degradation of bisphenol A(BPA)was achieved by CuMnO_(2)/PMS system,which was 5-fold and 21-fold higher than that in Mn_(2)O_(3)/PMS system and Cu_(2)O/PMS system.The CuMnO_(2)/PMS system shown prominent BPA removal performance under high salinity conditions,prominent PMS utilization efficiency,outstanding total organic carbon removal rate,wide range of applicable pH and good stability.This work unveiled that the^(1)O_(2)-dominated non-radical process of CuMnO_(2)/PMS system overcame the inhibitory effect of anions in high salinity conditions,which provided a promising technique to remove organic pollutants from high saline wastewater.展开更多
The formation mechanism of high salinity geothermal water is significant for utilizing geothermal resources and mineral resources.The high salinity in geothermal water may be derived from the geothermal mother fluid o...The formation mechanism of high salinity geothermal water is significant for utilizing geothermal resources and mineral resources.The high salinity in geothermal water may be derived from the geothermal mother fluid or from the evaporite dissolution.It is difficult to distinguish between these two sources because they may have similar hydrochemistry.In this paper,water chemistry and stable isotopes were used to explore the high salinity geothermal water in Yanchanghe geothermal field,central China.It is a lowtemperature hydrothermal system in the inland karst area.The thermal water is Cl-Na type with high salinity(TDS>8,400 mg/L).The modified silicon thermometer is more suitable and the reasonable result is about 58.8℃.The maximum circulation depth is 1.9 km.Using the temperature of hot and cold water to estimate the mixing ratio is 58%-81%.Saturation index(SI),Na/1000-K/100-Mg1/2 and Gibbs diagram suggest that the main source of salt in geothermal water is derived from the evaporite dissolution,which provides Cl-of 11,264-31,279 mg/L and Na+of 9,272-21,236 mg/L.We found the combination of temperature and hydrogeochemistry can be used to investigate the formation mechanism and mixing process of high-salinity geothermal water formed in a karst low-temperature hydrothermal system.展开更多
Drilling fluids face failure during drilling deep reservoir with high temperature and high salt.The experimental results show that high temperature and salinity reduce the negative charge on the surface of bentonite i...Drilling fluids face failure during drilling deep reservoir with high temperature and high salt.The experimental results show that high temperature and salinity reduce the negative charge on the surface of bentonite in the drilling fluid and cause the coalescence of bentonite particles.As a result,the particles coalesce,the grid structure is destroyed,and the rheological properties,rock-carrying capacity and filtration properties are lost.To resolve the foregoing,in this study,0.05-wt%carbon nanotubes are introduced into a 4%bentonite drilling fluid under conditions where the temperature and concentration of added Na Cl reach 180°C and 10 wt%,respectively.The carbon nanotubes adsorb on the bentonite surface and increase the space among bentonite particles.The steric hindrance prevents the coalescence of bentonite in high temperature and high salt environment.Thus bentonite maintains the small size distribution of bentonite and supports the bentonite grid structure in the drilling fluid.As a result,the rock-carrying capacity of the drilling fluid increases by 85.1%.Moreover,the mud cake formed by the accumulation of small-sized bentonite particles is dense;consequently,the filtration of bentonite drilling fluid reduced by 30.2%.展开更多
Precipitation of calcium carbonate （CaCOs） scale on heat transfer surfaces is a serious and expensive problem widely occurring in numerous industrial processes. In this study, we compared the scale inhibition effect...Precipitation of calcium carbonate （CaCOs） scale on heat transfer surfaces is a serious and expensive problem widely occurring in numerous industrial processes. In this study, we compared the scale inhibition effect of six kinds of commercial scale inhibitors and screened out the best one （scale inhibitor SQ-1211） to investigate its scale inhibition performance in highly saline conditions at high temperature through static scale inhibition tests. The influences of scale inhibitor dosage, temperature, heating time and pH on the inhibition efficiency of the optimal scale inhibitor were investigated. The morphologies and crystal structures of the precipitates were characterized by Scanning Electron Microscopy and X-ray Diffraction analysis. Results showed that the scale inhibition efficiency of the optimal scale inhibitor decreased with the increase of the reaction temperature. When the concentration of Ca^2＋ was 1600 mg/L, the scale inhibition rate could reach 90.7% at 80℃ at pH 8. The optimal scale inhibitor could effectively retard scaling at high temperature. In the presence of the optimal scale inhibitor, the main crystal structure of CaCOs changed from calcite to aragonite.展开更多
In this study,an up-flow anaerobic sludge blanket(UASB) reactor was applied to treat the high salinity wastewater from heavy oil production process.At a HRT of ≥24 h,the COD removal reached as high as 65.08% at an in...In this study,an up-flow anaerobic sludge blanket(UASB) reactor was applied to treat the high salinity wastewater from heavy oil production process.At a HRT of ≥24 h,the COD removal reached as high as 65.08% at an influent COD ranging from 350mg/L to 640mg/L.An average of 74.33% oil reduction was also achieved in the UASB reactor at an initial oil concentration between 112mg/L and 205mg/L.These results indicated that this heavy oil production related wastewater could be degraded efficiently in the UASB reactor.Granular sludge was formed in this reactor.In addition,two models,built on the back propagation neural network(BPNN) theory and linear regression techniques were developed for the simulation of the UASB system performance in the oily wastewater biodegradation.The average error of COD and oil removal was-0.65% and 0.84%,respectively.The results indicated that the models built on the BPNN theory were wellfitted to the detected data,and were able to simulate and predict the removal of COD and oil by the UASB reactor.展开更多
In this study, the water budget in the treatment of high salinity landfill-leachate was estimated and the influence of evapotranspiration （ET） on treatment performance was investigated. The salinity of the inside of...In this study, the water budget in the treatment of high salinity landfill-leachate was estimated and the influence of evapotranspiration （ET） on treatment performance was investigated. The salinity of the inside of horizontal subsurface flow constructed wetland （HSF） of the raw leachate inflow was 15.0± 3.4 g.Cl/L which was in the level of the salinity of the survival limit of reed, and that of the double diluted leachate inflow was 9.3 ± 1.9 g.CI7L. There were large differences in the vegetation between HSF of the raw leachate inflow and that of the double diluted leachate inflow. The dense vegetation bed of double diluted leachate inflow during the growing season （April-October） provided a high ET and a large water loss, which made great contributions to the reduction of the outflow load of COD and T-N. The HSF with die-back reeds in the non-growing season （November-March） provided a slight ET and a small water loss and made less of a contribution to pollutant removal compared to the HSF with dense vegetation bed during the growing season. However, the HSF with die-back reeds during the non-growing season exhibited higher removal performance than the unplanted HSF.展开更多
The direct electrolysis of high-salinity water(e.g.,seawater)presents significant potential for large-scale green hydrogen production.However,challenges such as corrosion and catalyst poisoning,driven by high concentr...The direct electrolysis of high-salinity water(e.g.,seawater)presents significant potential for large-scale green hydrogen production.However,challenges such as corrosion and catalyst poisoning,driven by high concentrations of Cl−,severely impact the efficiency and stability of both oxygen evolution reaction and hydrogen evolution reaction,posing a major obstacle to their industrialization.Therefore,developing high-performance electrocatalysts with anti-corrosion and anti-poisoning properties is critical for achieving stable and efficient electrolysis in high-salinity environments,making this a prominent challenge in contemporary research.This review presents a thorough analysis of the challenges and advancements in the production of green hydrogen through seawater electrolysis.We compile various approaches to enhance the selectivity of the oxygen evolution reaction(OER)and hydrogen evolution reaction(HER),as well as corrosion resistance in high-salinity water electrolysis.These approaches include improvements in catalyst intrinsic activity,electrolyte design and introduct protective barrier layers.Finally,the prospects for the development of seawater electrolysis for hydrogen production are presented.展开更多
Polymerflooding is an effective method widely applied for enhancing oil recovery(EOR)by reducing the mobility ratio between theinjected water and crude oil.However,traditional polymers encounter challenges in high sali...Polymerflooding is an effective method widely applied for enhancing oil recovery(EOR)by reducing the mobility ratio between theinjected water and crude oil.However,traditional polymers encounter challenges in high salinity reservoirs due to their salt sensitivity.Toovercome this challenge,we synthesized a zwitterion polymer(PAMNS)with salt-induced tackifying property through copolymerization ofacrylamide and a zwitterion monomer,methylacrylamide propyl-N,N-dimethylbutylsulfonate(NS).NS monomer is obtained from thereaction between 1,4-butanesultone and dimethylamino propyl methylacrylamide.In this study,the rheological properties,salt responsiveness,and EOR efficiency of PAMNS were evaluated.Results demonstrate that PAMNS exhibits desirable salt-induced tackifyingcharacteristics,with viscosity increasing up to 2.4 times as the NaCl concentration reaches a salinity of 30×10^(4)mg L^(-1).Furthermore,highvalence ions possess a much stronger effect on enhancing viscosity,manifested as Mg^(2+)>Ca^(2+)>Na^(+).Molecular dynamics simulations(MD)andfluid dynamics experiment results demonstrate that PAMNS molecules exhibit a more stretched state and enhanced intermolecularassociations in high-salinity environments.It is because of the salt-induced tackifying,PAMNS demonstrates superior performance inpolymerflooding experiments under salinity ranges from 5×10^(4)mg L^(-1)to 20×10^(4)mg L^(-1),leading to 10.38–19.83%higher EOR thantraditional polymers.展开更多
Polymer-based EOR methods in low-permeability reservoirs face injectivity issues and increased fracturing due to near wellbore plugging,as well as high-pressure gradients in these reservoirs.Polymer may cause pore blo...Polymer-based EOR methods in low-permeability reservoirs face injectivity issues and increased fracturing due to near wellbore plugging,as well as high-pressure gradients in these reservoirs.Polymer may cause pore blockage and undergo shear degradation and even oxidative degradation at high temperatures in the presence of very hard brine.Low-tension gas(LTG) flooding has the potential to be applied successfully for low-permeability carbonate reservoirs even in the presence of high formation brine salinity.In LTG flooding,the interfacial tension between oil and water is reduced to ultra-low values(10^-3 dyne/cm) by injecting an optimized surfactant formulation to maximize mobilization of residual oil post-waterflood.Gas(nitrogen,hydrocarbon gases or C02) is co-injected along with the surfactant slug to generate in situ foam which reduces the mobility ratio between the displaced(oil) and displacing phases,thus improving the displacement efficiency of the oil.In this work,the mechanism governing LTG flooding in low-permeability,high-salinity reservoirs was studied at a microscopic level using microemulsion properties and on a macroscopic scale by laboratory-scale coreflooding experiments.The main injection parameters studied were injected slug salinity and the interrelation between surfactant concentration and injected foam quality,and how they influence oil mobilization and displacement efficiency.Qualitative assessment of the results was performed by studying oil recovery,oil fractional flow,oil bank breakthrough and effluent salinity and pressure drop characteristics.展开更多
Plugging agents have been widely used to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,the harsh conditions of fractured-vuggy carbonate reservoirs yield a significant challenge in maintaining a...Plugging agents have been widely used to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,the harsh conditions of fractured-vuggy carbonate reservoirs yield a significant challenge in maintaining a long-term stabilization of plugging agents.In this work,we developed an anti-hightemperature and high-salinity polymer gel(APG)with excellent resistance to high temperature(140℃)and ultra-high salinity(240000 mg/L).The rheology and microstructure of APG were characterized before and after gelation.Core plugging tests on fractured cubic cores were conducted to quantify the plugging performance of the gel system.Experimental results showed that the Sclerglucan and Cobalt(Ⅱ)Chloride Hexahydrate filled the three-dimensional(3-D)network with various morphologies,providing extra protection to the cross-linking points of the 3D network structure of APG and thus,leading to a prolongation of the dehydration time.The dehydration rate of APG was only 5%within 30days,and the strength of APG could be maintained at a rigid or near-rigid level over 150 days.Moreover,APG exhibited satisfactory shear and scour resistance.Core plugging tests showed that APG could achieve a plugging rate of 90%and demonstrate ignorable minor damage to the substrate.Our results indicate that APG can serve as a great candidate in channel plugging in fractured-vuggy carbonate reservoirs where fractures are fully developed.展开更多
High salt and low temperature are the bottlenecks for the remove of oil contaminants by enriched crude-oil degrading microbiota in Liaohe Estuarine Wetland(LEW),China.To improve the performance of crude-oil removal,mi...High salt and low temperature are the bottlenecks for the remove of oil contaminants by enriched crude-oil degrading microbiota in Liaohe Estuarine Wetland(LEW),China.To improve the performance of crude-oil removal,microbiota was further immobilized by two methods,i.e.,sodium alginate(SA),and polyvinyl alcohol and sodium alginate(PVA+SA).Results showed that the crude oil was effectively removed by the enrichment with an average degrading ratio of 19.42-31.45 mg(L d)^(−1).The optimal inoculum size for the n-alkanes removal was 10%and 99.89%.Some members of genera Acinetobacter,Actinophytocola,Aquabac-terium,Dysgonomonas,Frigidibacter,Sphingobium,Serpens,and Pseudomonas dominated in crude-oil degrading microflora.Though the removal efficiency was lower than free bacteria when the temperature was 15℃,SA and PVA+SA immobilization im-proved the resistance to salinity.The composite crude-oil degrading microbiota in this study demonstrated a perspective potential for crude oil removal from surface water under high salinity and low temperature conditions.展开更多
Macroalgae that inhabit intertidal zones are exposed to the air for several hours during low tide and must endure desiccation and high variations in temperature, light intensity, and salinity. Pyropia yezoensis (Rhodo...Macroalgae that inhabit intertidal zones are exposed to the air for several hours during low tide and must endure desiccation and high variations in temperature, light intensity, and salinity. Pyropia yezoensis (Rhodophyta, Bangiales), a typical intertidal red macroalga that is commercially cultivated in the northwestern Pacific Ocean, was investigated under different dehydration stresses of desiccation, high salinity, and high mannitol concentration. Using chlorophyll fluorescence imaging, photosynthetic activities of P. yezoensis thalli were analyzed using six parameters derived from quenching curves and rapid light curves. A distinct discrepancy was revealed in photosynthetic responses to different dehydration stresses. Dehydration caused by exposure to air resulted in rapid decreases in photosynthetic activities, which were always lower than two other stresses at the same water loss (WL) level. High salinity only reduced photosynthesis significantly at its maximum WL of 40% but maintained a relatively stable maximum quantum yield of photosystem II (PSII) (Fv/Fm). High mannitol concentration induced maximum WL of 20% for a longer time (60 min) than the other two treatments and caused no adverse influences on the six parameters at different WL except for a significant decrease in non-photochemical quenching (NPQ) at 20% WL. Illustrated by chlorophyll fluorescence images, severe spatial heterogeneities were induced by desiccation with lower values in the upper parts than the middle or basal parts of the thalli. The NPQ and rETRmax (maximum relative electron transport rate) demonstrated clear distinctions for evaluating photosynthetic responses, indicating their sensitivity and applicability. The findings of this study indicated that the natural dehydration of exposure to air results in stronger and more heterogeneous effects than those of high salinity or high mannitol concentration.展开更多
Assuming a reservoir with a typical salt-lake background in the Qaidam Basin as a testbed,in this study the var-iation law of the rock electrical parameters has been determined through water displacement experiments w...Assuming a reservoir with a typical salt-lake background in the Qaidam Basin as a testbed,in this study the var-iation law of the rock electrical parameters has been determined through water displacement experiments with different salinities.As made evident by the results,the saturation index increases with the degree of water injec-tion.When the salinity of the injected water is lower than 80000 ppm,the resistivity of the rock samplefirst decreases,then it remains almost constant in an intermediate stage,andfinally it grows,thereby giving rise to a‘U’profile behavior.As the salinity decreases,the water saturation corresponding to the inflection point of the resistivity becomes lower,thereby leading to a wider‘U’type range and a higher terminal resistivity.For dif-ferent samples,higher initial resistivity of the sample in the oil-bearing state,and higher resistivity after low-sali-nity water washing are obtained when a thicker lithology is considered.展开更多
A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion e...A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.展开更多
In-depth profile control is a crucial technique employed to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,it is a challenge to achieve in-depth profile control.In this paper,two types of organic...In-depth profile control is a crucial technique employed to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,it is a challenge to achieve in-depth profile control.In this paper,two types of organic gel systems,namely s-MPG and MSRG,tailored for fractured-vuggy reservoirs with 140℃ and 22×10^(4) mg/L have been developed.FTIR was used to analyze the functional groups of s-MPG and MSRG.Additionally,the quality retention rates of s-MPG and MSRG were assessed using TG-DSC,yielding results of 92.85%and 92.65%,respectively.The dilution rates of s-MPG and MSRG are found to be 18.69%and 26.69%,respectively,demonstrating excellent compatibility and adaptability.The enhancement performance depends on the synergistic effect that the anti-dilution s-MPG effectively separates bottom water,while high-strength MSRG separates the oil layer.Moreover,the EOR perfor-mances of s-MPG synergy with MSRG in various types of fractured-vuggy carbonate models were also evaluated.The highest oil recovery of 12%is achieved in fracture network model.Laboratory results indicate that the synergistic combination of s-MPG and MSRG for water plugging in fractured-vuggy carbonate reservoirs results in a more effective enhancement of oil recovery compared to using a sin-gle gel system for plugging.Finally,the s-MPG synergy with MSRG has been applied in actual fractured-vuggy carbonate reservoirs.As expected,the water cut of typical well is reduced from 100%to 30%and the increased oil production is 1142 t totally.Therefore,this study presents a novel approach to achieving in-depth profile control by leveraging the synergistic effect of s-MPG with MSRG in fractured-vuggy carbonate reservoirs.展开更多
A new polymer system, referred to simply as the AP-P4 polymer system, aims at solving the problems of high temperature, high salinity and the poor shearing resistance, all of which are encountered by conventional ...A new polymer system, referred to simply as the AP-P4 polymer system, aims at solving the problems of high temperature, high salinity and the poor shearing resistance, all of which are encountered by conventional polymers (such as polyacrylamide) used in profile control, profile performance improvement and EOR operations in the Zhongyuan Oilfield, Sinopec. This system has been developed on the basis of the specific molecular structure and the better properties of high temperature resistance, high salinity resistance and strong shearing resistance of the new type of AP-P4 association polymer. Acidity modifying agents and cross-linking agents (MZ-YL, MZ-BE, MZ-XS), compatible with the new polymer system, are selected. Results of performance tests have shown that the new polymer system has excellent thickening, high temperature, high salinity and shearing resistance and anti-dehydrating properties. In 2003, it underwent its first pilot test in 26 wells in China, with remarkable effects in increasing oil production and decreasing water production. The newly developed polymer system and its application technology described in this paper may play a guiding role in polymer profile control operations in the oil reservoirs of high temperature and high salinity.展开更多
Iron(Fe) bioavailability to plants is reduced in saline soils;however, the exact mechanisms underlying this effect are not yet completely understood. Siderophore-expressing rhizobacteria may represent a promising alte...Iron(Fe) bioavailability to plants is reduced in saline soils;however, the exact mechanisms underlying this effect are not yet completely understood. Siderophore-expressing rhizobacteria may represent a promising alternative to chemical fertilizers by simultaneously tackling salt-stress effects and Fe limitation in saline soils. In addition to draught, plants growing in arid soils face two other major challenges: high salinity and Fe deficiency. Salinity attenuates growth, affects plant physiology, and causes nutrient imbalance,which is, in fact, one of the major consequences of saline stress. Iron is a micronutrient essential for plant development, and it is required by several metalloenzymes involved in photosynthesis and respiration. Iron deficiency is associated with chlorosis and low crop productivity. The role of microbial siderophores in Fe supply to plants and the effect of plant growth-promoting rhizobacteria(PGPR) on the mitigation of saline stress in crop culture are well documented. However, the dual effect of siderophore-producing PGPR, both on salt stress and Fe limitation, is still poorly explored. This review provides a critical overview of the combined effects of Fe limitation and soil salinization as challenges to modern agriculture and intends to summarize some indirect evidence that argues in favour of siderophore-producing PGPR as biofertilization agents in salinized soils. Recent developments and future perspectives on the use of PGPR are discussed as clues to sustainable agricultural practices in the context of present and future climate change scenarios.展开更多
Recently,nanoparticles have been used along with surfactants for enhancing oil recovery.Although the recent studies show that oil recovery is enhanced using nanoparticle/surfactant solutions,some effective parameters ...Recently,nanoparticles have been used along with surfactants for enhancing oil recovery.Although the recent studies show that oil recovery is enhanced using nanoparticle/surfactant solutions,some effective parameters and mechanisms involved in the oil recovery have not yet been investigated.Therefore,the temperature effect on the stability of nanoparticle/surfactant solutions and ultimate oil recovery has been studied in this work,and the optimal concentrations of both SiO2 nanoparticle and surfactant(sodium dodecyl sulfate)have been determined by the Central Composite Design method.In addition,the simultaneous effects of parameters and their interactions have been investigated.Study of the stability of the injected solutions indicates that the nanoparticle concentration is the most important factor affecting the solution stability.The surfactant makes the solution more stable if used in appropriate concentrations below the CMC.According to the micromodel flooding results,the most effective factor for enhancing oil recovery is temperature compared to the nanoparticle and surfactant concentrations.Therefore,in floodings with higher porous medium temperature,the oil viscosity reduction is considerable,and more oil is recovered.In addition,the surfactant concentration plays a more effective role in reservoirs with higher temperatures.In other words,at a surfactant concentration of 250 ppm,the ultimate oil recovery is improved about 20%with a temperature increase of 20°C.However,when the surfactant concentration is equal to 750 ppm,the temperature increase enhances the ultimate oil recovery by only about 7%.Finally,the nanoparticle and surfactant optimum concentrations determined by Design-Expert software were equal to 46 and 159 ppm,respectively.It is worthy to note that obtained results are validated by the confirmation test.展开更多
Soil respiration in wetlands surrounding lakes is a vital component of the soil carbon cycle in arid regions. However, information remains limited on the soil respiration around highly saline lakes during the plant gr...Soil respiration in wetlands surrounding lakes is a vital component of the soil carbon cycle in arid regions. However, information remains limited on the soil respiration around highly saline lakes during the plant growing season. Here, we aimed to evaluate diurnal and seasonal variation in soil respiration to elucidate the controlling factors in the wetland of Ebinur Lake, Xinjiang Uygur Autonomous Region, western China. We used a soil carbon flux automatic analyzer （LI-840A） to measure soil respiration rates during the growing season （April to November） in two fields covered by reeds and tamarisk and one field with no vegetation （bare soil） from 2015 to 2016. The results showed a single peak in the diurnal pattern of soil respiration from 11：00 to 17：00 for plots covered in reeds, tamarisk, and bare soil, with minimum values being detected from 03：00 to 07：00. During the growing season, the soil respiration of reeds and tamarisk peaked during the thriving period （4.16 and 3.75 μmol.m-2.s-1, respectively）, while that of bare soil peaked during the intermediate growth period （0.74 pmol-m-2-s-1）. The soil respiration in all three plots was lowest during the wintering period （0.08, 0.09, and -0.87 μmol.m-2.s-1, respectively）. Air temperature and relative humidity significantly influenced soil respiration. A significant linear relationship was detected between soil respiration and soil temperature for reeds, tamarisk, and bare soil. The average Q10 of reeds and tamarisk were larger than that of bare soil. However, soil moisture content was not the main factor controlling soil respiration. Soil respiration was negatively correlated with soil pH and soil salinity in all three plot types. In contrast, soil respiration was positively correlated with organic carbon. Overall,CO2 emissions and greenhouse gases had a relatively weak effect on the wetlands surrounding the highly saline Ebinur Lake.展开更多
This work presents the design of a robust foam formulation that tolerates harsh reservoir conditions(high salinity,high divalent ion concentration,high temperature,light oil,and hydrocarbon injection gas)in a sandston...This work presents the design of a robust foam formulation that tolerates harsh reservoir conditions(high salinity,high divalent ion concentration,high temperature,light oil,and hydrocarbon injection gas)in a sandstone reservoir.For this,we selected anionic Alpha Olefin Sulfonate(AOS)surfactants and studied their synergistic effects in mixtures with zwitterionic betaines to enhance foam performance.The laboratory workflow used to define the best formulation followed a de-risking approach in three consecutive phases.First,(phase 1)the main surfactant(AOS)was selected among a series of commercial candidates in static conditions.Then,(phase 2)the betaine booster to be combined with the previously selected AOS was chosen and their ratio optimized in static conditions.Subsequently,(phase 3)the surfactant/booster ratio was optimized under dynamic conditions in a porous medium in the absence and the presence of oil.As a result of this study,a mixture of an AOS C14-C16 and cocamidopropyl hydroxysultaine(CAPHS)was selected as the one having the best performance.The designed formulation was proven to be robust in a wide range of conditions.It generated a strong and stable foam at reservoir conditions,overcoming variations in salinity and foam quality,and tolerated the presence of oil.展开更多
基金supported by the Open Fund of Guangdong Provincial Key Laboratory of Solid Wastes Pollution Control and Recycling (No.2020B121201003)the National Natural Science Foundation of China (Nos.21876099,22106088,and 22276110)+1 种基金the Key Research&Developmental Program of Shandong Province (No.2021CXGC011202)the Fundamental Research Funds of Shandong University (No.zy202102)。
文摘Advanced oxidation processes have been widely studied for organic pollutants treatment in water,but the degradation performance of radical-dominated pathway was severely inhibited by the side reactions between the anions and radicals,especially in high salinity conditions.Here,a singlet oxygen(^(1)O_(2))-dominated non-radical process was developed for organic pollutants degradation in high salinity wastewater,with layered crednerite(CuMnO_(2))as catalysts and peroxymonosulfate(PMS)as oxidant.Based on the experiments and density functional theory calculations,^(1)O_(2)was the dominating reactive species and the constructed Cu-O-Mn with electron-deficient Mn captured electron from PMS promoting the generation of^(1)O_(2).The rapid degradation of bisphenol A(BPA)was achieved by CuMnO_(2)/PMS system,which was 5-fold and 21-fold higher than that in Mn_(2)O_(3)/PMS system and Cu_(2)O/PMS system.The CuMnO_(2)/PMS system shown prominent BPA removal performance under high salinity conditions,prominent PMS utilization efficiency,outstanding total organic carbon removal rate,wide range of applicable pH and good stability.This work unveiled that the^(1)O_(2)-dominated non-radical process of CuMnO_(2)/PMS system overcame the inhibitory effect of anions in high salinity conditions,which provided a promising technique to remove organic pollutants from high saline wastewater.
基金supported by the National Natural Science Foundation of China(Grant number:41440027)。
文摘The formation mechanism of high salinity geothermal water is significant for utilizing geothermal resources and mineral resources.The high salinity in geothermal water may be derived from the geothermal mother fluid or from the evaporite dissolution.It is difficult to distinguish between these two sources because they may have similar hydrochemistry.In this paper,water chemistry and stable isotopes were used to explore the high salinity geothermal water in Yanchanghe geothermal field,central China.It is a lowtemperature hydrothermal system in the inland karst area.The thermal water is Cl-Na type with high salinity(TDS>8,400 mg/L).The modified silicon thermometer is more suitable and the reasonable result is about 58.8℃.The maximum circulation depth is 1.9 km.Using the temperature of hot and cold water to estimate the mixing ratio is 58%-81%.Saturation index(SI),Na/1000-K/100-Mg1/2 and Gibbs diagram suggest that the main source of salt in geothermal water is derived from the evaporite dissolution,which provides Cl-of 11,264-31,279 mg/L and Na+of 9,272-21,236 mg/L.We found the combination of temperature and hydrogeochemistry can be used to investigate the formation mechanism and mixing process of high-salinity geothermal water formed in a karst low-temperature hydrothermal system.
基金financially supported by the Natural Science Foundation of China(Grants 51904328)the Natural Science Foundation of China(Grants U1762212)Fundamental Research Funds for the Central Universities(Grants 27R1702031A)
文摘Drilling fluids face failure during drilling deep reservoir with high temperature and high salt.The experimental results show that high temperature and salinity reduce the negative charge on the surface of bentonite in the drilling fluid and cause the coalescence of bentonite particles.As a result,the particles coalesce,the grid structure is destroyed,and the rheological properties,rock-carrying capacity and filtration properties are lost.To resolve the foregoing,in this study,0.05-wt%carbon nanotubes are introduced into a 4%bentonite drilling fluid under conditions where the temperature and concentration of added Na Cl reach 180°C and 10 wt%,respectively.The carbon nanotubes adsorb on the bentonite surface and increase the space among bentonite particles.The steric hindrance prevents the coalescence of bentonite in high temperature and high salt environment.Thus bentonite maintains the small size distribution of bentonite and supports the bentonite grid structure in the drilling fluid.As a result,the rock-carrying capacity of the drilling fluid increases by 85.1%.Moreover,the mud cake formed by the accumulation of small-sized bentonite particles is dense;consequently,the filtration of bentonite drilling fluid reduced by 30.2%.
基金supported by the Major Bidding Projects in Shandong Province (No. SDZS-2012-SHBT01)
文摘Precipitation of calcium carbonate （CaCOs） scale on heat transfer surfaces is a serious and expensive problem widely occurring in numerous industrial processes. In this study, we compared the scale inhibition effect of six kinds of commercial scale inhibitors and screened out the best one （scale inhibitor SQ-1211） to investigate its scale inhibition performance in highly saline conditions at high temperature through static scale inhibition tests. The influences of scale inhibitor dosage, temperature, heating time and pH on the inhibition efficiency of the optimal scale inhibitor were investigated. The morphologies and crystal structures of the precipitates were characterized by Scanning Electron Microscopy and X-ray Diffraction analysis. Results showed that the scale inhibition efficiency of the optimal scale inhibitor decreased with the increase of the reaction temperature. When the concentration of Ca^2＋ was 1600 mg/L, the scale inhibition rate could reach 90.7% at 80℃ at pH 8. The optimal scale inhibitor could effectively retard scaling at high temperature. In the presence of the optimal scale inhibitor, the main crystal structure of CaCOs changed from calcite to aragonite.
基金the support provided by the Research & Technology Development Project of China National Petroleum Corporation (06A0302)Postdoctor Innovation Funds in Shandong Province (201002039)the Fundamental Research Funds for the Central Universities (27R1204023A)
文摘In this study,an up-flow anaerobic sludge blanket(UASB) reactor was applied to treat the high salinity wastewater from heavy oil production process.At a HRT of ≥24 h,the COD removal reached as high as 65.08% at an influent COD ranging from 350mg/L to 640mg/L.An average of 74.33% oil reduction was also achieved in the UASB reactor at an initial oil concentration between 112mg/L and 205mg/L.These results indicated that this heavy oil production related wastewater could be degraded efficiently in the UASB reactor.Granular sludge was formed in this reactor.In addition,two models,built on the back propagation neural network(BPNN) theory and linear regression techniques were developed for the simulation of the UASB system performance in the oily wastewater biodegradation.The average error of COD and oil removal was-0.65% and 0.84%,respectively.The results indicated that the models built on the BPNN theory were wellfitted to the detected data,and were able to simulate and predict the removal of COD and oil by the UASB reactor.
文摘In this study, the water budget in the treatment of high salinity landfill-leachate was estimated and the influence of evapotranspiration （ET） on treatment performance was investigated. The salinity of the inside of horizontal subsurface flow constructed wetland （HSF） of the raw leachate inflow was 15.0± 3.4 g.Cl/L which was in the level of the salinity of the survival limit of reed, and that of the double diluted leachate inflow was 9.3 ± 1.9 g.CI7L. There were large differences in the vegetation between HSF of the raw leachate inflow and that of the double diluted leachate inflow. The dense vegetation bed of double diluted leachate inflow during the growing season （April-October） provided a high ET and a large water loss, which made great contributions to the reduction of the outflow load of COD and T-N. The HSF with die-back reeds in the non-growing season （November-March） provided a slight ET and a small water loss and made less of a contribution to pollutant removal compared to the HSF with dense vegetation bed during the growing season. However, the HSF with die-back reeds during the non-growing season exhibited higher removal performance than the unplanted HSF.
基金supported from the National Natural Science Foundation of China(Nos.52072197,52174283,and 22301156)the Natural Science Foundation of Shandong Province(No.ZR2024QB012),the Qingdao Natural Science Foundation(No.24-4-4-zrjj-16-jch)+1 种基金Shandong Province“Double-Hundred Talent Plan”(No.WST2020003)Qingdao New Energy Shandong Laboratory Open Project(No.QNESLOP 202305).
文摘The direct electrolysis of high-salinity water(e.g.,seawater)presents significant potential for large-scale green hydrogen production.However,challenges such as corrosion and catalyst poisoning,driven by high concentrations of Cl−,severely impact the efficiency and stability of both oxygen evolution reaction and hydrogen evolution reaction,posing a major obstacle to their industrialization.Therefore,developing high-performance electrocatalysts with anti-corrosion and anti-poisoning properties is critical for achieving stable and efficient electrolysis in high-salinity environments,making this a prominent challenge in contemporary research.This review presents a thorough analysis of the challenges and advancements in the production of green hydrogen through seawater electrolysis.We compile various approaches to enhance the selectivity of the oxygen evolution reaction(OER)and hydrogen evolution reaction(HER),as well as corrosion resistance in high-salinity water electrolysis.These approaches include improvements in catalyst intrinsic activity,electrolyte design and introduct protective barrier layers.Finally,the prospects for the development of seawater electrolysis for hydrogen production are presented.
基金support of the National Natural Science Foundation of China(No.52120105007)the National Key Research and Development Program of China(2019Y FA0708700)are gratefully acknowledged.
文摘Polymerflooding is an effective method widely applied for enhancing oil recovery(EOR)by reducing the mobility ratio between theinjected water and crude oil.However,traditional polymers encounter challenges in high salinity reservoirs due to their salt sensitivity.Toovercome this challenge,we synthesized a zwitterion polymer(PAMNS)with salt-induced tackifying property through copolymerization ofacrylamide and a zwitterion monomer,methylacrylamide propyl-N,N-dimethylbutylsulfonate(NS).NS monomer is obtained from thereaction between 1,4-butanesultone and dimethylamino propyl methylacrylamide.In this study,the rheological properties,salt responsiveness,and EOR efficiency of PAMNS were evaluated.Results demonstrate that PAMNS exhibits desirable salt-induced tackifyingcharacteristics,with viscosity increasing up to 2.4 times as the NaCl concentration reaches a salinity of 30×10^(4)mg L^(-1).Furthermore,highvalence ions possess a much stronger effect on enhancing viscosity,manifested as Mg^(2+)>Ca^(2+)>Na^(+).Molecular dynamics simulations(MD)andfluid dynamics experiment results demonstrate that PAMNS molecules exhibit a more stretched state and enhanced intermolecularassociations in high-salinity environments.It is because of the salt-induced tackifying,PAMNS demonstrates superior performance inpolymerflooding experiments under salinity ranges from 5×10^(4)mg L^(-1)to 20×10^(4)mg L^(-1),leading to 10.38–19.83%higher EOR thantraditional polymers.
基金supported by Petroleum Development Oman and Shell Global Solutions International。
文摘Polymer-based EOR methods in low-permeability reservoirs face injectivity issues and increased fracturing due to near wellbore plugging,as well as high-pressure gradients in these reservoirs.Polymer may cause pore blockage and undergo shear degradation and even oxidative degradation at high temperatures in the presence of very hard brine.Low-tension gas(LTG) flooding has the potential to be applied successfully for low-permeability carbonate reservoirs even in the presence of high formation brine salinity.In LTG flooding,the interfacial tension between oil and water is reduced to ultra-low values(10^-3 dyne/cm) by injecting an optimized surfactant formulation to maximize mobilization of residual oil post-waterflood.Gas(nitrogen,hydrocarbon gases or C02) is co-injected along with the surfactant slug to generate in situ foam which reduces the mobility ratio between the displaced(oil) and displacing phases,thus improving the displacement efficiency of the oil.In this work,the mechanism governing LTG flooding in low-permeability,high-salinity reservoirs was studied at a microscopic level using microemulsion properties and on a macroscopic scale by laboratory-scale coreflooding experiments.The main injection parameters studied were injected slug salinity and the interrelation between surfactant concentration and injected foam quality,and how they influence oil mobilization and displacement efficiency.Qualitative assessment of the results was performed by studying oil recovery,oil fractional flow,oil bank breakthrough and effluent salinity and pressure drop characteristics.
基金financial support of the Science Foundation of China University of Petroleum,Beijing(Grant No.2462020XKBH013)The Science Foundation of China University of Petroleum,Beijing(Grant No.2462017YJRC037)+1 种基金Sponsored by CNPC Innovation Found(Grant No.2021DQ02-0202)Horizontal project of Sinopec Northwest Oilfield Company(Grant No.202108ZB0046)are also significantly acknowledged
文摘Plugging agents have been widely used to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,the harsh conditions of fractured-vuggy carbonate reservoirs yield a significant challenge in maintaining a long-term stabilization of plugging agents.In this work,we developed an anti-hightemperature and high-salinity polymer gel(APG)with excellent resistance to high temperature(140℃)and ultra-high salinity(240000 mg/L).The rheology and microstructure of APG were characterized before and after gelation.Core plugging tests on fractured cubic cores were conducted to quantify the plugging performance of the gel system.Experimental results showed that the Sclerglucan and Cobalt(Ⅱ)Chloride Hexahydrate filled the three-dimensional(3-D)network with various morphologies,providing extra protection to the cross-linking points of the 3D network structure of APG and thus,leading to a prolongation of the dehydration time.The dehydration rate of APG was only 5%within 30days,and the strength of APG could be maintained at a rigid or near-rigid level over 150 days.Moreover,APG exhibited satisfactory shear and scour resistance.Core plugging tests showed that APG could achieve a plugging rate of 90%and demonstrate ignorable minor damage to the substrate.Our results indicate that APG can serve as a great candidate in channel plugging in fractured-vuggy carbonate reservoirs where fractures are fully developed.
基金supported by the National Key R&D Program of China(No.2018YFD0900805)the Start up Foundation for Introducing Talent of Nanjing Univer-sity of Information Science and Technology。
文摘High salt and low temperature are the bottlenecks for the remove of oil contaminants by enriched crude-oil degrading microbiota in Liaohe Estuarine Wetland(LEW),China.To improve the performance of crude-oil removal,microbiota was further immobilized by two methods,i.e.,sodium alginate(SA),and polyvinyl alcohol and sodium alginate(PVA+SA).Results showed that the crude oil was effectively removed by the enrichment with an average degrading ratio of 19.42-31.45 mg(L d)^(−1).The optimal inoculum size for the n-alkanes removal was 10%and 99.89%.Some members of genera Acinetobacter,Actinophytocola,Aquabac-terium,Dysgonomonas,Frigidibacter,Sphingobium,Serpens,and Pseudomonas dominated in crude-oil degrading microflora.Though the removal efficiency was lower than free bacteria when the temperature was 15℃,SA and PVA+SA immobilization im-proved the resistance to salinity.The composite crude-oil degrading microbiota in this study demonstrated a perspective potential for crude oil removal from surface water under high salinity and low temperature conditions.
基金supported by National Key R&D Program of China(2018YFC1406704 and 2020YFD0900702).
文摘Macroalgae that inhabit intertidal zones are exposed to the air for several hours during low tide and must endure desiccation and high variations in temperature, light intensity, and salinity. Pyropia yezoensis (Rhodophyta, Bangiales), a typical intertidal red macroalga that is commercially cultivated in the northwestern Pacific Ocean, was investigated under different dehydration stresses of desiccation, high salinity, and high mannitol concentration. Using chlorophyll fluorescence imaging, photosynthetic activities of P. yezoensis thalli were analyzed using six parameters derived from quenching curves and rapid light curves. A distinct discrepancy was revealed in photosynthetic responses to different dehydration stresses. Dehydration caused by exposure to air resulted in rapid decreases in photosynthetic activities, which were always lower than two other stresses at the same water loss (WL) level. High salinity only reduced photosynthesis significantly at its maximum WL of 40% but maintained a relatively stable maximum quantum yield of photosystem II (PSII) (Fv/Fm). High mannitol concentration induced maximum WL of 20% for a longer time (60 min) than the other two treatments and caused no adverse influences on the six parameters at different WL except for a significant decrease in non-photochemical quenching (NPQ) at 20% WL. Illustrated by chlorophyll fluorescence images, severe spatial heterogeneities were induced by desiccation with lower values in the upper parts than the middle or basal parts of the thalli. The NPQ and rETRmax (maximum relative electron transport rate) demonstrated clear distinctions for evaluating photosynthetic responses, indicating their sensitivity and applicability. The findings of this study indicated that the natural dehydration of exposure to air results in stronger and more heterogeneous effects than those of high salinity or high mannitol concentration.
基金The authors would like to acknowledge the financial support from the Jiangsu Key Laboratory of Oil-Gas Storage and Transportation Technology(Grant No.CDYQCY202201)funded by the Key Laboratory of Shallow Geothermal Energy,Ministry of Natural Resources of the People’s Republic of China.The authors thank the anonymous reviewers for their constructive and valuable opinions gratefully.
文摘Assuming a reservoir with a typical salt-lake background in the Qaidam Basin as a testbed,in this study the var-iation law of the rock electrical parameters has been determined through water displacement experiments with different salinities.As made evident by the results,the saturation index increases with the degree of water injec-tion.When the salinity of the injected water is lower than 80000 ppm,the resistivity of the rock samplefirst decreases,then it remains almost constant in an intermediate stage,andfinally it grows,thereby giving rise to a‘U’profile behavior.As the salinity decreases,the water saturation corresponding to the inflection point of the resistivity becomes lower,thereby leading to a wider‘U’type range and a higher terminal resistivity.For dif-ferent samples,higher initial resistivity of the sample in the oil-bearing state,and higher resistivity after low-sali-nity water washing are obtained when a thicker lithology is considered.
基金Supported by the National Natural Science Foundation of China under Grant No 11335003
文摘A polymeric nanopore membrane with selective ionic transport has been proposed as a potential device to convert the chemical potential energy in salinity gradients to electrical power. However, its energy conversion efficiency and power density are often limited due to the challenge in reliably controlling the size of the nanopores with the conventional chemical etching method. Here we report that without chemical etching, polyimide （PI） membranes irradiated with GeV heavy ions have negatively charged nanopores, showing nearly perfect selectivity for cations over anions, and they can generate electrical power from salinity gradients. We further demonstrate that the power generation efficiency of the PI membrane approaches the theoretical limit, and the maximum power density reaches 130m W/m2 with a modified etching method, outperforming the previous energy conversion device that was made of polymeric nanopore membranes.
基金support of Sinopec Northwest Oilfield Company,Xinjiang Urumqi(Grant No.KJ202336).
文摘In-depth profile control is a crucial technique employed to enhance oil recovery in fractured-vuggy carbonate reservoirs.However,it is a challenge to achieve in-depth profile control.In this paper,two types of organic gel systems,namely s-MPG and MSRG,tailored for fractured-vuggy reservoirs with 140℃ and 22×10^(4) mg/L have been developed.FTIR was used to analyze the functional groups of s-MPG and MSRG.Additionally,the quality retention rates of s-MPG and MSRG were assessed using TG-DSC,yielding results of 92.85%and 92.65%,respectively.The dilution rates of s-MPG and MSRG are found to be 18.69%and 26.69%,respectively,demonstrating excellent compatibility and adaptability.The enhancement performance depends on the synergistic effect that the anti-dilution s-MPG effectively separates bottom water,while high-strength MSRG separates the oil layer.Moreover,the EOR perfor-mances of s-MPG synergy with MSRG in various types of fractured-vuggy carbonate models were also evaluated.The highest oil recovery of 12%is achieved in fracture network model.Laboratory results indicate that the synergistic combination of s-MPG and MSRG for water plugging in fractured-vuggy carbonate reservoirs results in a more effective enhancement of oil recovery compared to using a sin-gle gel system for plugging.Finally,the s-MPG synergy with MSRG has been applied in actual fractured-vuggy carbonate reservoirs.As expected,the water cut of typical well is reduced from 100%to 30%and the increased oil production is 1142 t totally.Therefore,this study presents a novel approach to achieving in-depth profile control by leveraging the synergistic effect of s-MPG with MSRG in fractured-vuggy carbonate reservoirs.
文摘A new polymer system, referred to simply as the AP-P4 polymer system, aims at solving the problems of high temperature, high salinity and the poor shearing resistance, all of which are encountered by conventional polymers (such as polyacrylamide) used in profile control, profile performance improvement and EOR operations in the Zhongyuan Oilfield, Sinopec. This system has been developed on the basis of the specific molecular structure and the better properties of high temperature resistance, high salinity resistance and strong shearing resistance of the new type of AP-P4 association polymer. Acidity modifying agents and cross-linking agents (MZ-YL, MZ-BE, MZ-XS), compatible with the new polymer system, are selected. Results of performance tests have shown that the new polymer system has excellent thickening, high temperature, high salinity and shearing resistance and anti-dehydrating properties. In 2003, it underwent its first pilot test in 26 wells in China, with remarkable effects in increasing oil production and decreasing water production. The newly developed polymer system and its application technology described in this paper may play a guiding role in polymer profile control operations in the oil reservoirs of high temperature and high salinity.
基金financially supported by Project PTDC/BIA-MIC/29736/2017funded by the European Regional Development Fund(FEDER)through COMPETE2020-Programa Operacional Competitividade e Internacionalizacao(POCI)and the Portuguese Foundation for Science and Technology(FCT/MCTES)by the Centre for Environmental and Marine Studies(CESAM,Portugal)(UID/AMB/50017-POCI-01-0145-FEDER-007638)
文摘Iron(Fe) bioavailability to plants is reduced in saline soils;however, the exact mechanisms underlying this effect are not yet completely understood. Siderophore-expressing rhizobacteria may represent a promising alternative to chemical fertilizers by simultaneously tackling salt-stress effects and Fe limitation in saline soils. In addition to draught, plants growing in arid soils face two other major challenges: high salinity and Fe deficiency. Salinity attenuates growth, affects plant physiology, and causes nutrient imbalance,which is, in fact, one of the major consequences of saline stress. Iron is a micronutrient essential for plant development, and it is required by several metalloenzymes involved in photosynthesis and respiration. Iron deficiency is associated with chlorosis and low crop productivity. The role of microbial siderophores in Fe supply to plants and the effect of plant growth-promoting rhizobacteria(PGPR) on the mitigation of saline stress in crop culture are well documented. However, the dual effect of siderophore-producing PGPR, both on salt stress and Fe limitation, is still poorly explored. This review provides a critical overview of the combined effects of Fe limitation and soil salinization as challenges to modern agriculture and intends to summarize some indirect evidence that argues in favour of siderophore-producing PGPR as biofertilization agents in salinized soils. Recent developments and future perspectives on the use of PGPR are discussed as clues to sustainable agricultural practices in the context of present and future climate change scenarios.
基金financially supported by the Iran Nanotechnology Initiative Council
文摘Recently,nanoparticles have been used along with surfactants for enhancing oil recovery.Although the recent studies show that oil recovery is enhanced using nanoparticle/surfactant solutions,some effective parameters and mechanisms involved in the oil recovery have not yet been investigated.Therefore,the temperature effect on the stability of nanoparticle/surfactant solutions and ultimate oil recovery has been studied in this work,and the optimal concentrations of both SiO2 nanoparticle and surfactant(sodium dodecyl sulfate)have been determined by the Central Composite Design method.In addition,the simultaneous effects of parameters and their interactions have been investigated.Study of the stability of the injected solutions indicates that the nanoparticle concentration is the most important factor affecting the solution stability.The surfactant makes the solution more stable if used in appropriate concentrations below the CMC.According to the micromodel flooding results,the most effective factor for enhancing oil recovery is temperature compared to the nanoparticle and surfactant concentrations.Therefore,in floodings with higher porous medium temperature,the oil viscosity reduction is considerable,and more oil is recovered.In addition,the surfactant concentration plays a more effective role in reservoirs with higher temperatures.In other words,at a surfactant concentration of 250 ppm,the ultimate oil recovery is improved about 20%with a temperature increase of 20°C.However,when the surfactant concentration is equal to 750 ppm,the temperature increase enhances the ultimate oil recovery by only about 7%.Finally,the nanoparticle and surfactant optimum concentrations determined by Design-Expert software were equal to 46 and 159 ppm,respectively.It is worthy to note that obtained results are validated by the confirmation test.
文摘Soil respiration in wetlands surrounding lakes is a vital component of the soil carbon cycle in arid regions. However, information remains limited on the soil respiration around highly saline lakes during the plant growing season. Here, we aimed to evaluate diurnal and seasonal variation in soil respiration to elucidate the controlling factors in the wetland of Ebinur Lake, Xinjiang Uygur Autonomous Region, western China. We used a soil carbon flux automatic analyzer （LI-840A） to measure soil respiration rates during the growing season （April to November） in two fields covered by reeds and tamarisk and one field with no vegetation （bare soil） from 2015 to 2016. The results showed a single peak in the diurnal pattern of soil respiration from 11：00 to 17：00 for plots covered in reeds, tamarisk, and bare soil, with minimum values being detected from 03：00 to 07：00. During the growing season, the soil respiration of reeds and tamarisk peaked during the thriving period （4.16 and 3.75 μmol.m-2.s-1, respectively）, while that of bare soil peaked during the intermediate growth period （0.74 pmol-m-2-s-1）. The soil respiration in all three plots was lowest during the wintering period （0.08, 0.09, and -0.87 μmol.m-2.s-1, respectively）. Air temperature and relative humidity significantly influenced soil respiration. A significant linear relationship was detected between soil respiration and soil temperature for reeds, tamarisk, and bare soil. The average Q10 of reeds and tamarisk were larger than that of bare soil. However, soil moisture content was not the main factor controlling soil respiration. Soil respiration was negatively correlated with soil pH and soil salinity in all three plot types. In contrast, soil respiration was positively correlated with organic carbon. Overall,CO2 emissions and greenhouse gases had a relatively weak effect on the wetlands surrounding the highly saline Ebinur Lake.
基金funded by the Centro para el Desarrollo Tecnologico Industrial(CDTI)of the Spanish Ministry of Science and Innovation(IDI-20170503)the Fundacion Cepsa with the Escuela Tecnica Superior de Ingenieros de Minas y Energia of the Universidad Politecnica de Madrid(UPM)。
文摘This work presents the design of a robust foam formulation that tolerates harsh reservoir conditions(high salinity,high divalent ion concentration,high temperature,light oil,and hydrocarbon injection gas)in a sandstone reservoir.For this,we selected anionic Alpha Olefin Sulfonate(AOS)surfactants and studied their synergistic effects in mixtures with zwitterionic betaines to enhance foam performance.The laboratory workflow used to define the best formulation followed a de-risking approach in three consecutive phases.First,(phase 1)the main surfactant(AOS)was selected among a series of commercial candidates in static conditions.Then,(phase 2)the betaine booster to be combined with the previously selected AOS was chosen and their ratio optimized in static conditions.Subsequently,(phase 3)the surfactant/booster ratio was optimized under dynamic conditions in a porous medium in the absence and the presence of oil.As a result of this study,a mixture of an AOS C14-C16 and cocamidopropyl hydroxysultaine(CAPHS)was selected as the one having the best performance.The designed formulation was proven to be robust in a wide range of conditions.It generated a strong and stable foam at reservoir conditions,overcoming variations in salinity and foam quality,and tolerated the presence of oil.
