Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys...Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys design and development,which enables the design and development of Al alloys to upgrade from traditional empirical to the integration of compositionprocess-structure-mechanical property,thus greatly accelerating its development speed and reducing its development cost.This study combines calculation of phase diagram(CALPHAD),Finite element calculations,first principle calculations,and microstructure characterization methods to predict and regulate the formation and structure of composite precipitates from the design of highmodulus Al alloy compositions and optimize the casting process parameters to inhibit the formation of micropore defects in the casting process,and the final tensile strength of Al alloys reaches420 MPa and Young's modulus reaches more than 88 GPa,which achieves the design goal of the high strength and modulus Al alloys,and establishes a new mode of the design and development of the strength/modulus Al alloys.展开更多
In order to explore the bonding failure mechanism of high modulus carbon fiber composite materials,the tensile experiment and finite element numerical simulation for single-lap and bevel-lap joints of unidirectional l...In order to explore the bonding failure mechanism of high modulus carbon fiber composite materials,the tensile experiment and finite element numerical simulation for single-lap and bevel-lap joints of unidirectional laminates are carried out,and the stress distributions,the failure modes,and the damage contours are analyzed. The analysis shows that the main reason for the failure of the single-lap joint is that the stress concentration of the ply adjacent to the adhesive layer is serious owing to the modulus difference,and the stress cannot be effectively transmitted along the thickness direction of the laminate. When the tensile stress of the ply exceeds its ultimate strength in the loading process,the surface fiber will fail. Compared with the single-lap joint,the bevel-lap joint optimizes the stress transfer path along the thickness direction,allows each layer of the laminate to share the load,avoids the stress concentration of the surface layer,and improves the bearing capacity of the bevel-lap joint. The improved bearing capacity of the bevellap joint is twice as much as that of the single-lap joint. The research in this paper provides a new idea for the subsequent study of mechanical properties of adhesively bonded composite materials.展开更多
Along with the popularization and application of the steel bridge in China,due to the high modulus of asphalt concrete with good waterproof,anti-fatigue,anti-aging and good performance,asphalt concrete with high modul...Along with the popularization and application of the steel bridge in China,due to the high modulus of asphalt concrete with good waterproof,anti-fatigue,anti-aging and good performance,asphalt concrete with high modulus was widely used in steel bridge deck pavement,the test and comparative study of high modulus asphalt concrete were carried out based on two types of common high modulus asphalt concrete which include the casting type asphalt concrete and epoxy resin modified asphalt concrete,aims to further explore the performance features of the steel bridge deck with high modulus asphalt concrete,and provide help on the application of this asphalt concrete on the steel bridge deck.展开更多
Magnesium,being the lightest structural metal,faces limitations in alloy development due to its inherently low elastic modulus.Therefore,this study develops high-performance,high-modulus Mg-15Gd-8Y-xAl-0.3Mn(wt.%)(x=6...Magnesium,being the lightest structural metal,faces limitations in alloy development due to its inherently low elastic modulus.Therefore,this study develops high-performance,high-modulus Mg-15Gd-8Y-xAl-0.3Mn(wt.%)(x=6,8,10)alloys and investigates their microstructure and mechanical properties.The findings indicate that the alloys primarily consist of Al_(2)RE andα-Mg phases,with both the amount and size of Al_(2)RE phase increasing as the Al content rises.After extrusion,both the grains and the Al_(2)RE phase are refined.The increased modulus of the alloys is mainly due to the formation of the high-modulus Al_(2)RE phase.When the Al content is 6%,8%,and 10%,the modulus of the alloys is 51.8 GPa,53.8 GPa,and 56.1 GPa,respectively.Additionally,the Al_(2)RE and Mg5RE phases can jointly regulate the microstructure and mechanical properties of the alloys.As the Al content increases,the amount of Al_(2)RE phase increases,consuming the rare earth elements in the alloy and reducing the nano-precipitated Mg5RE phase.Consequently,with the increase in Al content,the recrystallization rate increases,and the recrystallized grains become larger.When the Al content is 6%,the alloy exhibits a bimodal structure with the smallest recrystallized grains,resulting in the highest yield strength of 341 MPa.When the Al content is 8%,the alloy has a fine,fully recrystallized structure,leading to a relatively high elongation of 9.1%.These findings provide valuable insights for designing high-modulus magnesium alloys with optimized yield strength and elongation for structural applications.展开更多
All-solid-state lithium-sulfur batteries(ASSLSBs) have become one of the most potential candidates for the next-generation high-energy systems due to their intrinsic safety and high theoretical energy density.However,...All-solid-state lithium-sulfur batteries(ASSLSBs) have become one of the most potential candidates for the next-generation high-energy systems due to their intrinsic safety and high theoretical energy density.However, PEO-based ASSLSBs face the dilemma of insufficient Coulombic efficiency and long-term stability caused by the coupling problems of dendrite growth of anode and polysulfide shuttle of cathode. In this work, 1,3,5-trioxane(TOX) is used as a functional additive to design a PEO-based composite solidstate electrolyte(denoted as TOX-CSE), which realizes the stable long-term cycle of an ASSLSB. The results show that TOX can in-situ decompose on the anode to form a composite solid electrolyte interphase(SEI) layer with rich-organic component. It yields a high average modulus of 5.0 GPa, greatly improving the mechanical stability of the SEI layer and thus inhibiting the growth of dendrites. Also,the robust SEI layer can act as a barrier to block the side reaction between polysulfides and lithium metal.As a result, a Li-Li symmetric cell assembled with a TOX-CSE exhibits prolonged cycling stability over 2000 h at 0.2 m A cm^(-2). The ASSLSB also shows a stable cycling performance of 500 cycles at 0.5 C.This work reveals the structure–activity relationship between the mechanical property of interface layer and the battery's cycling stability.展开更多
Requirements of self-compacting concrete （SCC） applied in pre-stressed mass concrete structures include high fluidity, high elastic modulus, low adiabatic temperature rise and low drying shrinkage, which cannot be s...Requirements of self-compacting concrete （SCC） applied in pre-stressed mass concrete structures include high fluidity, high elastic modulus, low adiabatic temperature rise and low drying shrinkage, which cannot be satisfied by ordinary SCC. In this study, in order to solve the problem, a few principles of SCC design were proposed and the effects of binder amount, fly ash （FA） substitution, aggregate content and gradation on the workability, temperature rise, drying shrinkage and elastic modulus of SCC were investigated. The results and analysis indicate that the primary factor influencing the fluidity was paste content, and the main methods improving the elastic modulusof SCC were a lower sand ratio and an optimized coarse aggregate gradation. Lower adiabatic temperature rise and drying shrinkage were beneficial for decreasing the cement content. Further, based on the optimization of mixture, a C50 grade SCC （with binder amount of only 480 kg/ m3, fly ash substitution of 40%, sand ratio of 51% and proper coarse aggregate gradation （Vs.~0 mm： V10-16 ram： V16.20 mm= 30%： 30%：40%）） with superior workability was successfully prepared. The temperature rise and drying shrinkage of the prepared SCC were significantly reduced, and the elastic modulus reached 37.6 GPa at 28 d.展开更多
In the present work, a third form, the so-called HP-BiNbO4 synthesized at high pressure and high temperature is investigated with the in-situ angle-dispersive x-ray diffraction（ADXRD） measurements under high pressur...In the present work, a third form, the so-called HP-BiNbO4 synthesized at high pressure and high temperature is investigated with the in-situ angle-dispersive x-ray diffraction（ADXRD） measurements under high pressure. We explore the compression behavior and phase stability of HP-BiNbO4. The structure of HP-BiNbO4 is first determined. The x-ray diffraction data reveal that the structure HP-BiNbO4 is stable under pressures up to 24.1 GPa. The ADXRD data yield a bulk modulus Ko = 185（7） GPa with a pressure derivative Ko＇= 2.9（0.8）. Furthermore, the data are compared with those of other ABO4 compounds. The results show that the bulk modulus of HP-BiNbO4（about 185 GPa） is slightly higher than that of tetragonal BiVO4 and significantly greater than those of the tungstates and molybdates.展开更多
The development of a meniscal substitute that conforms to the stringent requirements of high modulus,antiswelling,and shape compatibility continues to pose a significant challenge.Herein,the polycarbonate-based polyur...The development of a meniscal substitute that conforms to the stringent requirements of high modulus,antiswelling,and shape compatibility continues to pose a significant challenge.Herein,the polycarbonate-based polyurethane(PCU)with a covalent adaptive network is constructed by introducing the Diels-Alder(DA)bonds into the hard segments of PCU as the dynamic covalent cross-linkage.On the one hand,the stability of DA bonds at low temperatures enables them to lock molecular chains within the hard domain in an aqueous environment,thus maintaining the high robustness of the resultant elastomer under physiological conditions.On the other hand,the incorporated DA bonds can be disrupted at high temperatures,facilitating the movement of the molecular chains through heating,thus allowing for the three-dimensional(3D)printing of the meniscus scaffold whose shape closely resembles that of the native tissue.The fabricated meniscus substitute is surgically implanted into the knee joints of rabbits for 12 weeks,with in-vivo outcomes illustratively showcasing its remarkable proficiency in mitigating cartilage surface degradation.展开更多
Titanium and its alloys have been widely used for biomedical applications due to their better biomechanical and biochemical compatibility than other metallic materials such as stainless steels and Co-based alloys.A br...Titanium and its alloys have been widely used for biomedical applications due to their better biomechanical and biochemical compatibility than other metallic materials such as stainless steels and Co-based alloys.A brief review on the development of the b-type titanium alloys with high strength and low elastic modulus is given and the use of additive manufacturing technologies to produce porous titanium alloy parts,using Ti-6Al-4V as a reference,and its potential in fabricating biomedica replacements are discussed in this paper.展开更多
Shape memory polymers,with intrinsic enhanced strength and high thermal stability,are highly demanded in aerospace,engineering manufacturing,and spatial structures.In this paper,we develop a series of thermoplastic sh...Shape memory polymers,with intrinsic enhanced strength and high thermal stability,are highly demanded in aerospace,engineering manufacturing,and spatial structures.In this paper,we develop a series of thermoplastic shape memory poly(ether ether ketone)s(PEEKs)for the first time,achieving an excellent shape memory ability,high strength,and great thermal stability via a condensation polymerization.Through tuning the proportion of different bisphenol monomers,the flexibility of molecular main chains is adjusted,resulting in the regulation of transition temperature and mechanical performances.Synthesized PEEKs possess the tunable T_(g) from 143.3°C to 178.6°C,the enhanced tensile strength from 48.4 to 65.1 MPa,and Young’s modulus from 0.45 to 1.8 GPa,in addition to the excellent heat-triggered shape memory effect,as indicated by high recovery ratio(94%–98.9%)and fixity ratio(over 99.5%).Furthermore,after incorporating the magnetocaloric Fe_(3)O_(4) particles,the composites exhibit remotely noncontact magnetic-triggered shape memory behaviors(Fe_(3)O_(4) content over 10 wt%).These synthesized T_(g) tunable shape memory PEEKs and the composites have wide utilization potential in fields of engineering and aerospace structures,owing to the excellent mechanical properties,thermal stability,unique programmable deformation ability,and remote actuation.展开更多
基金supported by the National Natural Science Foundation of China(No.52073030)。
文摘Integrated computational materials engineering(ICME)is to integrate multi-scale computational simulations and key experimental methods such as macroscopic,mesoscopic,and microscopic into the whole process of Al alloys design and development,which enables the design and development of Al alloys to upgrade from traditional empirical to the integration of compositionprocess-structure-mechanical property,thus greatly accelerating its development speed and reducing its development cost.This study combines calculation of phase diagram(CALPHAD),Finite element calculations,first principle calculations,and microstructure characterization methods to predict and regulate the formation and structure of composite precipitates from the design of highmodulus Al alloy compositions and optimize the casting process parameters to inhibit the formation of micropore defects in the casting process,and the final tensile strength of Al alloys reaches420 MPa and Young's modulus reaches more than 88 GPa,which achieves the design goal of the high strength and modulus Al alloys,and establishes a new mode of the design and development of the strength/modulus Al alloys.
文摘In order to explore the bonding failure mechanism of high modulus carbon fiber composite materials,the tensile experiment and finite element numerical simulation for single-lap and bevel-lap joints of unidirectional laminates are carried out,and the stress distributions,the failure modes,and the damage contours are analyzed. The analysis shows that the main reason for the failure of the single-lap joint is that the stress concentration of the ply adjacent to the adhesive layer is serious owing to the modulus difference,and the stress cannot be effectively transmitted along the thickness direction of the laminate. When the tensile stress of the ply exceeds its ultimate strength in the loading process,the surface fiber will fail. Compared with the single-lap joint,the bevel-lap joint optimizes the stress transfer path along the thickness direction,allows each layer of the laminate to share the load,avoids the stress concentration of the surface layer,and improves the bearing capacity of the bevel-lap joint. The improved bearing capacity of the bevellap joint is twice as much as that of the single-lap joint. The research in this paper provides a new idea for the subsequent study of mechanical properties of adhesively bonded composite materials.
文摘Along with the popularization and application of the steel bridge in China,due to the high modulus of asphalt concrete with good waterproof,anti-fatigue,anti-aging and good performance,asphalt concrete with high modulus was widely used in steel bridge deck pavement,the test and comparative study of high modulus asphalt concrete were carried out based on two types of common high modulus asphalt concrete which include the casting type asphalt concrete and epoxy resin modified asphalt concrete,aims to further explore the performance features of the steel bridge deck with high modulus asphalt concrete,and provide help on the application of this asphalt concrete on the steel bridge deck.
基金supported by the National Key Research&Development Program of China(Grant Nos.2021YFB3703300)the National Natural Science Foundation of China(Grant Nos.52201115,52301142,52371107)the Shanxi Provincial Science and Technology Major Special Project plan of“Taking the lead in unveiling the list”(Grant Nos.202201050201012).
文摘Magnesium,being the lightest structural metal,faces limitations in alloy development due to its inherently low elastic modulus.Therefore,this study develops high-performance,high-modulus Mg-15Gd-8Y-xAl-0.3Mn(wt.%)(x=6,8,10)alloys and investigates their microstructure and mechanical properties.The findings indicate that the alloys primarily consist of Al_(2)RE andα-Mg phases,with both the amount and size of Al_(2)RE phase increasing as the Al content rises.After extrusion,both the grains and the Al_(2)RE phase are refined.The increased modulus of the alloys is mainly due to the formation of the high-modulus Al_(2)RE phase.When the Al content is 6%,8%,and 10%,the modulus of the alloys is 51.8 GPa,53.8 GPa,and 56.1 GPa,respectively.Additionally,the Al_(2)RE and Mg5RE phases can jointly regulate the microstructure and mechanical properties of the alloys.As the Al content increases,the amount of Al_(2)RE phase increases,consuming the rare earth elements in the alloy and reducing the nano-precipitated Mg5RE phase.Consequently,with the increase in Al content,the recrystallization rate increases,and the recrystallized grains become larger.When the Al content is 6%,the alloy exhibits a bimodal structure with the smallest recrystallized grains,resulting in the highest yield strength of 341 MPa.When the Al content is 8%,the alloy has a fine,fully recrystallized structure,leading to a relatively high elongation of 9.1%.These findings provide valuable insights for designing high-modulus magnesium alloys with optimized yield strength and elongation for structural applications.
基金National Natural Science Foundation of China (Grant Nos. 22178125 and 21875071)。
文摘All-solid-state lithium-sulfur batteries(ASSLSBs) have become one of the most potential candidates for the next-generation high-energy systems due to their intrinsic safety and high theoretical energy density.However, PEO-based ASSLSBs face the dilemma of insufficient Coulombic efficiency and long-term stability caused by the coupling problems of dendrite growth of anode and polysulfide shuttle of cathode. In this work, 1,3,5-trioxane(TOX) is used as a functional additive to design a PEO-based composite solidstate electrolyte(denoted as TOX-CSE), which realizes the stable long-term cycle of an ASSLSB. The results show that TOX can in-situ decompose on the anode to form a composite solid electrolyte interphase(SEI) layer with rich-organic component. It yields a high average modulus of 5.0 GPa, greatly improving the mechanical stability of the SEI layer and thus inhibiting the growth of dendrites. Also,the robust SEI layer can act as a barrier to block the side reaction between polysulfides and lithium metal.As a result, a Li-Li symmetric cell assembled with a TOX-CSE exhibits prolonged cycling stability over 2000 h at 0.2 m A cm^(-2). The ASSLSB also shows a stable cycling performance of 500 cycles at 0.5 C.This work reveals the structure–activity relationship between the mechanical property of interface layer and the battery's cycling stability.
基金Funded by National Natural Science Foundation of China(Nos.U1134008 and 51302090)the Fundamental Research Funds for the Central Universities(No.2015ZJ0005)
文摘Requirements of self-compacting concrete （SCC） applied in pre-stressed mass concrete structures include high fluidity, high elastic modulus, low adiabatic temperature rise and low drying shrinkage, which cannot be satisfied by ordinary SCC. In this study, in order to solve the problem, a few principles of SCC design were proposed and the effects of binder amount, fly ash （FA） substitution, aggregate content and gradation on the workability, temperature rise, drying shrinkage and elastic modulus of SCC were investigated. The results and analysis indicate that the primary factor influencing the fluidity was paste content, and the main methods improving the elastic modulusof SCC were a lower sand ratio and an optimized coarse aggregate gradation. Lower adiabatic temperature rise and drying shrinkage were beneficial for decreasing the cement content. Further, based on the optimization of mixture, a C50 grade SCC （with binder amount of only 480 kg/ m3, fly ash substitution of 40%, sand ratio of 51% and proper coarse aggregate gradation （Vs.~0 mm： V10-16 ram： V16.20 mm= 30%： 30%：40%）） with superior workability was successfully prepared. The temperature rise and drying shrinkage of the prepared SCC were significantly reduced, and the elastic modulus reached 37.6 GPa at 28 d.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51472171 and 11427810)the Chinese Academy of Sciences(Grant Nos.KJCX2-SW-NO3 and KJCX2-SW-N20)
文摘In the present work, a third form, the so-called HP-BiNbO4 synthesized at high pressure and high temperature is investigated with the in-situ angle-dispersive x-ray diffraction（ADXRD） measurements under high pressure. We explore the compression behavior and phase stability of HP-BiNbO4. The structure of HP-BiNbO4 is first determined. The x-ray diffraction data reveal that the structure HP-BiNbO4 is stable under pressures up to 24.1 GPa. The ADXRD data yield a bulk modulus Ko = 185（7） GPa with a pressure derivative Ko＇= 2.9（0.8）. Furthermore, the data are compared with those of other ABO4 compounds. The results show that the bulk modulus of HP-BiNbO4（about 185 GPa） is slightly higher than that of tetragonal BiVO4 and significantly greater than those of the tungstates and molybdates.
基金supported by the National Key Research and Development Program of China(Grant No.2018YFA0703100).
文摘The development of a meniscal substitute that conforms to the stringent requirements of high modulus,antiswelling,and shape compatibility continues to pose a significant challenge.Herein,the polycarbonate-based polyurethane(PCU)with a covalent adaptive network is constructed by introducing the Diels-Alder(DA)bonds into the hard segments of PCU as the dynamic covalent cross-linkage.On the one hand,the stability of DA bonds at low temperatures enables them to lock molecular chains within the hard domain in an aqueous environment,thus maintaining the high robustness of the resultant elastomer under physiological conditions.On the other hand,the incorporated DA bonds can be disrupted at high temperatures,facilitating the movement of the molecular chains through heating,thus allowing for the three-dimensional(3D)printing of the meniscus scaffold whose shape closely resembles that of the native tissue.The fabricated meniscus substitute is surgically implanted into the knee joints of rabbits for 12 weeks,with in-vivo outcomes illustratively showcasing its remarkable proficiency in mitigating cartilage surface degradation.
基金financially supported by the National High Technology Research and Development Program of China (No.2015AA033702)the National Basic Research Program of China (Nos.2012CB619103 and 2012CB933901)the National Natural Science Foundation of China (Nos.51271180 and 51271182)
文摘Titanium and its alloys have been widely used for biomedical applications due to their better biomechanical and biochemical compatibility than other metallic materials such as stainless steels and Co-based alloys.A brief review on the development of the b-type titanium alloys with high strength and low elastic modulus is given and the use of additive manufacturing technologies to produce porous titanium alloy parts,using Ti-6Al-4V as a reference,and its potential in fabricating biomedica replacements are discussed in this paper.
基金supported by the Heilongjiang Touyan Innovation Team Program。
文摘Shape memory polymers,with intrinsic enhanced strength and high thermal stability,are highly demanded in aerospace,engineering manufacturing,and spatial structures.In this paper,we develop a series of thermoplastic shape memory poly(ether ether ketone)s(PEEKs)for the first time,achieving an excellent shape memory ability,high strength,and great thermal stability via a condensation polymerization.Through tuning the proportion of different bisphenol monomers,the flexibility of molecular main chains is adjusted,resulting in the regulation of transition temperature and mechanical performances.Synthesized PEEKs possess the tunable T_(g) from 143.3°C to 178.6°C,the enhanced tensile strength from 48.4 to 65.1 MPa,and Young’s modulus from 0.45 to 1.8 GPa,in addition to the excellent heat-triggered shape memory effect,as indicated by high recovery ratio(94%–98.9%)and fixity ratio(over 99.5%).Furthermore,after incorporating the magnetocaloric Fe_(3)O_(4) particles,the composites exhibit remotely noncontact magnetic-triggered shape memory behaviors(Fe_(3)O_(4) content over 10 wt%).These synthesized T_(g) tunable shape memory PEEKs and the composites have wide utilization potential in fields of engineering and aerospace structures,owing to the excellent mechanical properties,thermal stability,unique programmable deformation ability,and remote actuation.
