Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration eff...Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration efficiency,complex denitration system,and high investment and operating cost.Here we put forward a novel polymer non-catalytic reduction(PNCR)technology that utilized a new type of polymer agent to remove NO_(x),and the proposed PNCR technology was applied to the existing waste-to-energy plant to test the denitration performance.The PNCR technology demonstrated excellent denitration performance with a NO_(x) emission concentration of<100 mg/Nm^(3) and high denitration efficiency of>75%at the temperature range of 800-900℃,which showed the application feasibility even on the complex and unstable industrial operating conditions.In addition,PNCR and hybrid polymer/selective non-catalytic reduction(PNCR/SNCR)technology possessed remarkable economic advantages including low investment fee and low operating cost of<10 CNY per ton of municipal solid waste(MSW)compared with selective catalytic reduction(SCR)technology.The excellent denitration performance of PNCR technology forebodes a broad industrial application prospect in the field of flue gas cleaning for waste-to-energy plants.展开更多
Conventional superconducting nanowire single-photon detectors(SNSPDs)have been typically limited in their applications due to their size,weight,and power consumption,which confine their use to laboratory settings.Howe...Conventional superconducting nanowire single-photon detectors(SNSPDs)have been typically limited in their applications due to their size,weight,and power consumption,which confine their use to laboratory settings.However,with the rapid development of remote imaging,sensing technologies,and long-range quantum communication with fewer topographical constraints,the demand for high-efficiency single-photon detectors integrated with avionic platforms is rapidly growing.We herein designed and manufactured the first drone-based SNSPD system with a system detection efficiency(SDE)as high as 91.8%.This drone-based system incorporates high-performance NbTiN SNSPDs,a self-developed miniature liquid helium dewar,and custom-built integrated electrical setups,making it capable of being launched in complex topographical conditions.Such a drone-based SNSPD system may open the use of SNSPDs for applications that demand high SDE in complex environments.展开更多
In this paper,a wideband true time delay line for X-band is designed to overcome the beam dispersion problem in a high-resolution spaceborne synthetic aperture radar phased array antenna system.The delay line loads th...In this paper,a wideband true time delay line for X-band is designed to overcome the beam dispersion problem in a high-resolution spaceborne synthetic aperture radar phased array antenna system.The delay line loads the electromagnetic bandgap structure on the upper surface of the substrate integrated waveguide.This is equivalent to including an additional inductance-capacitance for energy storage,which realizes the slow-wave effect.A microstrip line-SIW tapered transition structure is introduced to achieve a low loss and a large bandwidth.In the frequency band between 8-12 GHz,the measured results show that the delay multiplier of the delay line reaches 4 times,i.e.,delay line’s delay time is 4 times larger than 50Ωmicrostrip line with same length.Furthermore,the delay fluctuation,i.e.,the difference between the maximum and minimum delay as a percentage of the standard delay is only 2.5%,the insertion loss is less than-2.5 dB,and the return loss is less than-15 dB.Compared with the existing delay lines,the proposed delay line has the advantages of high delay efficiency,low delay error,wide bandwidth and low loss,which has good practical value and application prospects.展开更多
High-density linkage maps are essential tools for genome analysis of various biological traits. Our developed compact multi-gel system, HEGS （high efficiency genome scanning） is a high-throughput and high-cost-perfo...High-density linkage maps are essential tools for genome analysis of various biological traits. Our developed compact multi-gel system, HEGS （high efficiency genome scanning） is a high-throughput and high-cost-performance electrophoresis apparatus. Using this system, a high-density （average interval 2.3 cM） map with 1 065 AFLP and 63 SSR markers was constructed from recombinant inbred lines of a japonica and indica hybrid in just two months of electrophoreses by a single person. More than 50% of the mapped AFLP markers were commonly polymorphic for several combinations between japonica and indica rice and 15% were applicable for genetically closer crosses between upland and lowland types of japonica rice. This system can be used for rapid analyses of all kinds of markers.展开更多
Renewable power modules such as the thermoelectric generator and the PV panel are featured by low output voltage and low power.Aiming at maximum output power,a high energy efficiency module integrated converter(MIC),a...Renewable power modules such as the thermoelectric generator and the PV panel are featured by low output voltage and low power.Aiming at maximum output power,a high energy efficiency module integrated converter(MIC),as shown in Fig.1,and its control strategy for series connected distributed(SCD)renewable power systems,as shown in Fig.2,are proposed.The topology of the MIC is an improved one of the conventional H-bridge Buck-Boost converter.展开更多
Chinese cabbage(Brassica rapa subsp.pekinensis)is a widely cultivated vegetable crop in Asia with significant economic importance(Li et al.,2024;Yu et al.,2024).As a potyvirus with the broad host range,turnip mosaic v...Chinese cabbage(Brassica rapa subsp.pekinensis)is a widely cultivated vegetable crop in Asia with significant economic importance(Li et al.,2024;Yu et al.,2024).As a potyvirus with the broad host range,turnip mosaic virus(TuMV)is a major pathogen affecting Chinese cabbages,leading to severe yield losses(Li et al.,2019).Traditional control measures have shown limited efficacy,and the long-term use of chemical pesticides has led to significant issues such as environmental pollution and pathogen resistance(Samara et al.,2021;Lu et al.,2022).Biologicallyderived pesticides have garnered considerable attention owing to their eco-friendly attributes(Ayilara et al.,2023).γ-Aminobutyric acid(GABA),initially discovered in potato tubers,has been proven to regulate immune responses and enhance resistance to fungal and bacterial pathogens by modulating reactive oxygen species and stress-related hormone signals(Tarkowski et al.,2020;Wang et al.,2025).But biologically-derived agents typically face challenges such as large particle size and instability,which limit their practical application and bioavailability(Daraban et al.,2023).展开更多
The manufacturing industry is the core support for the development of the real economy.While promoting rapid economic growth,it also brings severe resource and environmental challenges.China's manufacturing indust...The manufacturing industry is the core support for the development of the real economy.While promoting rapid economic growth,it also brings severe resource and environmental challenges.China's manufacturing industry has ranked first in the world in terms of energy consumption,accounting for 56%of China's total energy consumption.Its electricity consumption exceeds 50%of the total social electricity consumption,and its carbon emissions reach 1.81 billion tons,accounting for 34% of the national total.Against this backdrop,enhancing the sustainability of high-end equipment manufacturing industries represented by aerospace has become a major strategic need for China's modernization,and it also provides strong support for solving global environmental problems.展开更多
BACKGROUND In 2017,our institution implemented a high efficiency(HE)pathway for lower limb orthopedic surgery.The employed strategy included patient selection,surgical instrument standardization,preoperative surgical ...BACKGROUND In 2017,our institution implemented a high efficiency(HE)pathway for lower limb orthopedic surgery.The employed strategy included patient selection,surgical instrument standardization,preoperative surgical nerve blocks,avoidance of general anesthesia and bypassing phase one recovery.We conducted a historic cohort study whose primary outcome was the postoperative recovery time between the HE and traditional(T)pathway.AIM To determine whether the implementation of a HE pathway was correlated with a reduction in postoperative recovery time.METHODS Patients who had unilateral elective lower limb orthopedic procedures through the T and HE pathway were screened between 2017 to 2019.Patients were at least 18 years old,and American Society of Anesthesiologists(ASA)Physical Status I to III without major systemic comorbidities were included.Propensity score was generated using multivariable regression taking age,body mass index,sex,ASA class and surgical type as covariates using nearest neighbour methods between the two pathways.Mann Whitney U test were used to analyzed total postoperative time.RESULTS There was an associated reduction in total postoperative recovery time of 63 minutes(95%CI:-69 to-57)in the HE group.The operating room time and total length of stay also had an associated decrease of 20 minutes(95%CI:-23 to-17)and 84 minutes(95%CI:-92 to-75)respectively.CONCLUSION Utilizing multifaceted strategies to improve perioperative efficiency was associated with a reduction in the postoperative recovery time in our retrospective study.This model can be a potential strategy to deal with surgical backlog in the face of ongoing human resource challenges.展开更多
The agricultural sector, encompassing agriculture, forestry, and land use, significantly contributes to global greenhouse gas(GHG) emissions, accounting for 23% of the total(IPCC 2019). It faces substantial challenges...The agricultural sector, encompassing agriculture, forestry, and land use, significantly contributes to global greenhouse gas(GHG) emissions, accounting for 23% of the total(IPCC 2019). It faces substantial challenges due to population growth and the urgent need to reduce its GHG emissions. Livestock husbandry, a crucial component of agriculture, accounts for a significant proportion of agricultural GHG emissions(Nugrahaeningtyas et al. 2024). Reducing emissions from livestock is essential not only for addressing climate change but also for protecting the ecological environment and achieving sustainable development. This is a critical task for the future of our planet and the well-being of future generations.展开更多
A novel Eu^(3+)-doped fluorapatite red phosphor Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2)Eu^(3+)with pure phase was synthesized in this study.Density functional theory(DFT)calculation and diffuse reflection spectrum a...A novel Eu^(3+)-doped fluorapatite red phosphor Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2)Eu^(3+)with pure phase was synthesized in this study.Density functional theory(DFT)calculation and diffuse reflection spectrum analysis reveal its potential as a matrix for phosphors excited by ultraviolet light.Eu^(3+)has a^(7)F_(0)→^(5)L_(6)transition at 394 nm,and the prepared phosphor exhibits a high emission intensity at 614 nm,which may be attributed to the^(5)D_(0)-^(7)F_(2)energy transition at the lower symmetry site of Eu^(3+).The optimal doping concentration of the phosphor is determined to be 11 mol%,with concentration quenching attributed to the exchange interaction mechanism.The overall color purity of the phosphor is up to 99.88%,with an internal quantum efficiency as high as 91.15%.Notably,Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2):11 mol%Eu^(3+)(CYBSF:11 mol%Eu^(3+))phosphors exhibit good thermal stability,with a thermal quenching temperature(T1/2)of 552 K and the intensity of emission at 423 K still at 88.89%of that at 298 K.The activation energy of the phosphor is up to 0.30287 eV.Its comprehensive luminescence performance surpasses that of commercial red phosphor,making it suitable for near ultraviolet excited warm white light emitting diode(NUV-WLED)with a high color rendering index(Ra=82)and a correlated color temperature(CCT)of 4339 K.Moreover,the phosphor achieves latent fingerprint visualization and anti-counterfeiting ink on different material surfaces:glass,aluminum foil,plastic and paper.Overall,the fluorapatite CYBSF:11 mol%Eu^(3+)phosphor holds great potential for multimodal applications due to its high quantum efficiency and good thermal stability.展开更多
Through the analysis of the impact of changes in the cotton planting industry on cotton production structure and benefit in Shandong under the national cotton production pattern in past ten years,based on the guarante...Through the analysis of the impact of changes in the cotton planting industry on cotton production structure and benefit in Shandong under the national cotton production pattern in past ten years,based on the guarantee of food security and the overall ecological regional layout of Shandong s agricultural characteristic and advantageous industries,we proposed that through the development of high-quality short-season cotton and the industrial application of high-efficiency technologies,a green and high-efficiency farming system should be established to comprehensively reduce cotton planting costs,improve comparative benefits,and realize green and efficient optimization technologies that unify the stable production of cotton and high-quality cotton supply and the industrial path supported by the new industrial model.It is aimed to speed up the upgrading and transformation of the existing traditional cotton cropping system,reconstruct a ternary structure of grains,economic crops and fodder in the ecological suitable cotton areas and sub-suitable cotton areas in Shandong,and maintain a series of new green and ecological cotton rotation industrial models including the“double security”of the grain and cotton industries,the ecological“double superiority”of "cotton and fodder",and the high-efficiency"double increase"of cotton and garlic,providing a certain foundation for the research on technological integration innovation and industrial structure optimization of the green,efficient and high-quality development and transformation of the cotton industry in Shandong during the"14 th Five-Year Plan"period.展开更多
Studies for many years have indicated that the seed yield of (Glycine max L. Merr.) soybean can be increased by increasing photosynthetic efficiency. The yield of cultivars with high photosynthetic efficiency (HPE) in...Studies for many years have indicated that the seed yield of (Glycine max L. Merr.) soybean can be increased by increasing photosynthetic efficiency. The yield of cultivars with high photosynthetic efficiency (HPE) increased by 30% - 40% in comparison with the cultivars with normal photosynthetic efficiency, indicating that the breeding of soybean by increasing RPE may have a bright prospect. HPE breeding can be used as the temporal monitoring in the breeding process to avoid the divergency of the predetermined goal, although HPE breeding does not shorten the breeding time. It was observed that limited C-4 pathway exists in soybean leaf and pod, suggesting that by increasing the genetic expression of some C-4 enzymes in C-3 crops through traditional or genetic engineering techniques, new breakthroughs in increasing the photosynthetic efficiency of C-3 plant may be practicable in the future.展开更多
Two new AlTiN coated cemented carbide drills with Al content of 40% and 55% in weight are developed for high efficiency dry drilling of 40Cr. By studying tool durability, machined hole quality, tool wear mechanism, ch...Two new AlTiN coated cemented carbide drills with Al content of 40% and 55% in weight are developed for high efficiency dry drilling of 40Cr. By studying tool durability, machined hole quality, tool wear mechanism, chip deformation, and lubrication, the dry drilling performance of the two kinds of coated drills is analyzed. Experimental results show that the AlTiN coated drills are suitable for high efficiency dry drilling and can obtain higher quality of machined holes. The tool durability of the drill with 55% Al content is 1. 3 times of that of the drill with 40% Al content at the cutting speed of 90 m/min. The wear mechanism of two AlTiN coatings are studied in experiments. During dry drilling process, oxidative wear appears in both two kinds of drills. The oxide film is formed on the top of the coated drill containing Al content of 55%. And the oxide film helps to increase its high temperature resistance and decrease the coating flaking, thus the drill is failed because of coating subsidence. The drill with less Al content is failed due to peeling and breakage. The lubricated condition in dry drilling is improved by the high Al content coating. It helps to reduce the cutting deformation and benefits to improve the quality of machined holes. The AlTiN coating with higher Al content shows longer tool life and higher quality of machined holes in high efficiency dry drilling. Its tool life increases by 30% compared with that of the coating with less Al content.展开更多
[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to exp...[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to explore the relationship be-tween agronomic traits and row type with phosphorus efficiency. [Method] Under available phosphorus mass fractions of 1.32 and 36.6 mg/kg, 172 barley varieties, including 79 two-rowed foreign barley, 22 multiple-rowed foreign barley, 58 two-rowed Chinese barley and 13 multiple-rowed Chinese barley, were selected to com-pare differences in phosphorus efficiency-related agronomic traits. Plant height, spike length, number of unfil ed grains, number of unfil ed grains, main panicle weight, to-tal panicle weight, total stem weight, weight of aerial part and heading stage were surveyed for statistical analysis. [Result] The results showed that, various agronomic traits were larger under fertilization condition than under non-fertilization condition ex-cept number of unfil ed grains and heading stage. Plant high, spike length, weight of aerial part and heading stage varied greatly under non-fertilization condition; number of fil ed grains, number of unfil ed grains and total stem weight varied greatly under fertilization condition. In two-rowed barley, plant height and number of fil ed grains of Chinese varieties were higher than those of foreign varieties, while other agronomic traits such as spike length, number of unfil ed grains, main panicle weight, total panicle weight, total stem weight, weight of aerial part and heading stage of foreign varieties were higher than those of Chinese varieties. Spike length and weight of aerial part in multiple-rowed and two-rowed foreign barley were higher than those in Chinese barley. In multiple-rowed barley, plant height, number of unfil ed grains, total panicle weight and total stem weight of foreign varieties were higher under non-fer-tilization condition and lower under fertilization condition compared with those of Chi-nese varieties; number of fil ed grains, main panicle weight and heading stage of foreign varieties were lower under non-fertilization condition and higher under fertil-ization condition compared with those of Chinese varieties. [Conclusion] Heading stage, number of fil ed grains, number of unfil ed grains and total stem weight are more sensitive to phosphorus efficiency. Multiple-rowed barley is more sensitive to phosphorus efficiency than two-rowed barley.展开更多
Green manufacturing （GM） and high efficiency machining technology are inevitable trends in the field of advanced manufacturing of the 21st century. To ensure green and high-efficiency machining, a new high efficienc...Green manufacturing （GM） and high efficiency machining technology are inevitable trends in the field of advanced manufacturing of the 21st century. To ensure green and high-efficiency machining, a new high efficiency cooling technology-cryogenic pneumatic mist jet impinging cooling （CPMJI） technology is presented. For obtaining the best cooling effect, a little quantity of coolant is carried by high speed cryogenic air （-20 C ） and reaches the machining zone in the form of mist jet to enhance heat transfer. Experimental results indicate that under the conditions of 40 m/s in the jet impinging speed and 10 mm in the jet impinging distance, the critical heat flux（CHF） nearly reaches 6× 10^7 W/m^2, more than six times of the CHF of the grinding burn with a value of （8～10）×10^6 W/m^2.展开更多
To understand the high yield and efficiency technique in hybrid rice Zhongzheyou No. 1, we conducted the correlation analysis, regression analysis and path analysis of hybrid rice Zhongzheyou No. 1 based on the data o...To understand the high yield and efficiency technique in hybrid rice Zhongzheyou No. 1, we conducted the correlation analysis, regression analysis and path analysis of hybrid rice Zhongzheyou No. 1 based on the data of its ear, grain and weight at different yield levels. From this study, we put forward the high yield and efficiency technique in Zhongzheyou No. 1 .. on the basis of certain effective ear number, filled grains per ear should be mainly targeted with a consideration to 1 000-grain weight.展开更多
A novel AC to DC charge pump with high performance is presented. Due to the pMOS structure and threshold voltage canceling technology, the efficiency and the output voltage are greatly improved. Test results show that...A novel AC to DC charge pump with high performance is presented. Due to the pMOS structure and threshold voltage canceling technology, the efficiency and the output voltage are greatly improved. Test results show that the output voltage and power efficiency are improved by 125% and 104% respectively at 13.56MHz for a 1V sinusoidal input compared to the traditional MOS diodes structure.展开更多
The experimental investigation of axial-flow pump has been rapidly developed to meet the needs of South-to-North Water Diversion Project of China. Owing to the boundary conditions of hub, blade tip clearance, much of ...The experimental investigation of axial-flow pump has been rapidly developed to meet the needs of South-to-North Water Diversion Project of China. Owing to the boundary conditions of hub, blade tip clearance, much of the physical phenomena and laws involved in this complex flow field can＇t be fully determined. The flow characteristics of the high efficiency axial-flow pump have been simulated by RNG k-e turbulence model and SIMPLEC arithmetic based on FLUENT software. Numerical results indicate that the data from the prediction show agreement with the experimental results, static pressure on pressure side of blades increases slightly at circumferential direction with radius increasing, and keep almost constant at the same radial while increasing gradually from inlet to exit on the suction side along flow direction at design conditions. The static pressure, total pressure and velocity at inlet, impeller outlet and vane outlet were measured by a five-hole probe, and a contrastive experiment was done to investigate the influence of hub leakage. The experimental results show that inlet flow is almost axial and the prerotation is very small at various conditions. The meridional velocity and circulation distribution are almost identical at impeller outlet at design conditions due to steady flow and high efficiency. The residual circulation exits at downstream of the guide vane, and the circumferential velocity component increases linearly from hub to tip at small flow rate conditions. Hub leakage in adjustable blades results in the decrease of the meridional velocity and circulation at blade exit near hub. The results of numerical simulation and experiments supply important flow structure information for the high-efficiency axial-flow pump.展开更多
Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign gen...Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign genes into wheat. By using the mature embryos derived from 20 different wheat lines including Shi 4185, Yumai 66, Lunxuan 987, CB037, Yangmai 6, Xinchun 9, Bobwhite, Han 6172, Zheng 9023, Jimai 20, Ningchun 4, and Jing 411, the effects of some factors including inoculation methods, initiating culture media, organic additives, antioxidants, and auxins on the regeneration from the explants were evaluated. The results indicated that the scraping embryo culture was better than the whole embryo culture, the Aa medium was better than the SD2 medium and dicamba was better than 2,4-D in increasing the regeneration frequency. An Adi medium was established in this study by adding silver nitrate, cysteine, ascorbic acid, dicamba, glutamine into the Aa medium at the concentration of 4,40, 100, 2, and 5 mg L^-1, respectively. By using the Adi medium and the scraping technique, the regeneration frequencies of the mature embryos of CB037, Lunxuan 987, Hart 6172, Yangmai 6, Bobwhite, Zheng 9023, Shi 4 185, and Jimai 20 became 85.6, 60,1, 46.0, 42.1,42.0, 34.0, 33.0, and 32.0%, respectively, which were about 5-8 times higher than that obtained from the conventional culture mediums and techniques. This novel regeneration system could be helpful in wheat transformation.展开更多
The integral shrouded blisk provides better performance with minimum weight,but its semi-open structure presents problems for its production.Manufacturing processes of these components require a removal of about 70%-9...The integral shrouded blisk provides better performance with minimum weight,but its semi-open structure presents problems for its production.Manufacturing processes of these components require a removal of about 70%-90%of material from their blanks.Multi-axis electrical discharge machining(EDM)is commonly used for these processes,but its poor efficiency cannot meet the requirements of mass production.Strong flushing assisted high-current discharge is able to improve the machining efficiency.In this paper,this method was applied to manufacture the integral shrouded blisk.An electrode design method was proposed.Taking the largest revolving entity inside the flow channel as the base geometry,this laminated arc-shaped hollow electrode meets the requirements such as high pressure flushing,tool wear compensation,and easy to be made.A 4-axis linkage machining tool path with planetary motion was proposed.Taking an integral guide vane ring as an example,it has been experimentally verified that the time consumption for each channel using this method was reduced to a half of the ordinary EDM method,while the finished surface quality remains same.展开更多
基金supported by the National Natural Science Foundation of China(No.92367107)。
文摘Ultra-low emission of nitrogen oxide(NO_(x))is an irreversible trend for the development of waste-to-energy industry.But traditional approaches to remove NO_(x) face significant challenge s,such as low denitration efficiency,complex denitration system,and high investment and operating cost.Here we put forward a novel polymer non-catalytic reduction(PNCR)technology that utilized a new type of polymer agent to remove NO_(x),and the proposed PNCR technology was applied to the existing waste-to-energy plant to test the denitration performance.The PNCR technology demonstrated excellent denitration performance with a NO_(x) emission concentration of<100 mg/Nm^(3) and high denitration efficiency of>75%at the temperature range of 800-900℃,which showed the application feasibility even on the complex and unstable industrial operating conditions.In addition,PNCR and hybrid polymer/selective non-catalytic reduction(PNCR/SNCR)technology possessed remarkable economic advantages including low investment fee and low operating cost of<10 CNY per ton of municipal solid waste(MSW)compared with selective catalytic reduction(SCR)technology.The excellent denitration performance of PNCR technology forebodes a broad industrial application prospect in the field of flue gas cleaning for waste-to-energy plants.
基金the Innovation Program for Quantum Science and Technology(Grant No.2023ZD0300100)the National Key Research and Development Program of China(Grant Nos.2023YFB3809600 and 2023YFC3007801)+1 种基金the National Natural Science Foundation of China(Grant Nos.62301543 and U24A20320)the Shanghai Sailing Program(Grant No.21YF1455700).
文摘Conventional superconducting nanowire single-photon detectors(SNSPDs)have been typically limited in their applications due to their size,weight,and power consumption,which confine their use to laboratory settings.However,with the rapid development of remote imaging,sensing technologies,and long-range quantum communication with fewer topographical constraints,the demand for high-efficiency single-photon detectors integrated with avionic platforms is rapidly growing.We herein designed and manufactured the first drone-based SNSPD system with a system detection efficiency(SDE)as high as 91.8%.This drone-based system incorporates high-performance NbTiN SNSPDs,a self-developed miniature liquid helium dewar,and custom-built integrated electrical setups,making it capable of being launched in complex topographical conditions.Such a drone-based SNSPD system may open the use of SNSPDs for applications that demand high SDE in complex environments.
基金Supported by the National Natural Science Foundation of China(61971401)。
文摘In this paper,a wideband true time delay line for X-band is designed to overcome the beam dispersion problem in a high-resolution spaceborne synthetic aperture radar phased array antenna system.The delay line loads the electromagnetic bandgap structure on the upper surface of the substrate integrated waveguide.This is equivalent to including an additional inductance-capacitance for energy storage,which realizes the slow-wave effect.A microstrip line-SIW tapered transition structure is introduced to achieve a low loss and a large bandwidth.In the frequency band between 8-12 GHz,the measured results show that the delay multiplier of the delay line reaches 4 times,i.e.,delay line’s delay time is 4 times larger than 50Ωmicrostrip line with same length.Furthermore,the delay fluctuation,i.e.,the difference between the maximum and minimum delay as a percentage of the standard delay is only 2.5%,the insertion loss is less than-2.5 dB,and the return loss is less than-15 dB.Compared with the existing delay lines,the proposed delay line has the advantages of high delay efficiency,low delay error,wide bandwidth and low loss,which has good practical value and application prospects.
文摘High-density linkage maps are essential tools for genome analysis of various biological traits. Our developed compact multi-gel system, HEGS （high efficiency genome scanning） is a high-throughput and high-cost-performance electrophoresis apparatus. Using this system, a high-density （average interval 2.3 cM） map with 1 065 AFLP and 63 SSR markers was constructed from recombinant inbred lines of a japonica and indica hybrid in just two months of electrophoreses by a single person. More than 50% of the mapped AFLP markers were commonly polymorphic for several combinations between japonica and indica rice and 15% were applicable for genetically closer crosses between upland and lowland types of japonica rice. This system can be used for rapid analyses of all kinds of markers.
文摘Renewable power modules such as the thermoelectric generator and the PV panel are featured by low output voltage and low power.Aiming at maximum output power,a high energy efficiency module integrated converter(MIC),as shown in Fig.1,and its control strategy for series connected distributed(SCD)renewable power systems,as shown in Fig.2,are proposed.The topology of the MIC is an improved one of the conventional H-bridge Buck-Boost converter.
基金supported by the National Natural Science Foundation of China(Grant Nos.32402564,32330096,32372631)Hebei Natural Science Foundation(Grant No.C2024204246)+1 种基金the Pinduoduo-China Agricultural University Research Fund(Grant No.PC2023B02018)the 2115 Talent Development Program of China Agricultural University.
文摘Chinese cabbage(Brassica rapa subsp.pekinensis)is a widely cultivated vegetable crop in Asia with significant economic importance(Li et al.,2024;Yu et al.,2024).As a potyvirus with the broad host range,turnip mosaic virus(TuMV)is a major pathogen affecting Chinese cabbages,leading to severe yield losses(Li et al.,2019).Traditional control measures have shown limited efficacy,and the long-term use of chemical pesticides has led to significant issues such as environmental pollution and pathogen resistance(Samara et al.,2021;Lu et al.,2022).Biologicallyderived pesticides have garnered considerable attention owing to their eco-friendly attributes(Ayilara et al.,2023).γ-Aminobutyric acid(GABA),initially discovered in potato tubers,has been proven to regulate immune responses and enhance resistance to fungal and bacterial pathogens by modulating reactive oxygen species and stress-related hormone signals(Tarkowski et al.,2020;Wang et al.,2025).But biologically-derived agents typically face challenges such as large particle size and instability,which limit their practical application and bioavailability(Daraban et al.,2023).
基金the support of the National Natural Science Foundation of China(Nos.52205476 and 52175415)the Natural Science Foundation of Jiangsu Province(No.BK20242040)+1 种基金the Fundamental Research Funds for the Central Universities(No.NG2024008)the Fund of Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology(No.1005ZAA20003-14)。
文摘The manufacturing industry is the core support for the development of the real economy.While promoting rapid economic growth,it also brings severe resource and environmental challenges.China's manufacturing industry has ranked first in the world in terms of energy consumption,accounting for 56%of China's total energy consumption.Its electricity consumption exceeds 50%of the total social electricity consumption,and its carbon emissions reach 1.81 billion tons,accounting for 34% of the national total.Against this backdrop,enhancing the sustainability of high-end equipment manufacturing industries represented by aerospace has become a major strategic need for China's modernization,and it also provides strong support for solving global environmental problems.
文摘BACKGROUND In 2017,our institution implemented a high efficiency(HE)pathway for lower limb orthopedic surgery.The employed strategy included patient selection,surgical instrument standardization,preoperative surgical nerve blocks,avoidance of general anesthesia and bypassing phase one recovery.We conducted a historic cohort study whose primary outcome was the postoperative recovery time between the HE and traditional(T)pathway.AIM To determine whether the implementation of a HE pathway was correlated with a reduction in postoperative recovery time.METHODS Patients who had unilateral elective lower limb orthopedic procedures through the T and HE pathway were screened between 2017 to 2019.Patients were at least 18 years old,and American Society of Anesthesiologists(ASA)Physical Status I to III without major systemic comorbidities were included.Propensity score was generated using multivariable regression taking age,body mass index,sex,ASA class and surgical type as covariates using nearest neighbour methods between the two pathways.Mann Whitney U test were used to analyzed total postoperative time.RESULTS There was an associated reduction in total postoperative recovery time of 63 minutes(95%CI:-69 to-57)in the HE group.The operating room time and total length of stay also had an associated decrease of 20 minutes(95%CI:-23 to-17)and 84 minutes(95%CI:-92 to-75)respectively.CONCLUSION Utilizing multifaceted strategies to improve perioperative efficiency was associated with a reduction in the postoperative recovery time in our retrospective study.This model can be a potential strategy to deal with surgical backlog in the face of ongoing human resource challenges.
文摘The agricultural sector, encompassing agriculture, forestry, and land use, significantly contributes to global greenhouse gas(GHG) emissions, accounting for 23% of the total(IPCC 2019). It faces substantial challenges due to population growth and the urgent need to reduce its GHG emissions. Livestock husbandry, a crucial component of agriculture, accounts for a significant proportion of agricultural GHG emissions(Nugrahaeningtyas et al. 2024). Reducing emissions from livestock is essential not only for addressing climate change but also for protecting the ecological environment and achieving sustainable development. This is a critical task for the future of our planet and the well-being of future generations.
基金supported by the National Natural Science Foundation of China(52372013)Natural Science Foundation of Shanghai(22ZR1460600)。
文摘A novel Eu^(3+)-doped fluorapatite red phosphor Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2)Eu^(3+)with pure phase was synthesized in this study.Density functional theory(DFT)calculation and diffuse reflection spectrum analysis reveal its potential as a matrix for phosphors excited by ultraviolet light.Eu^(3+)has a^(7)F_(0)→^(5)L_(6)transition at 394 nm,and the prepared phosphor exhibits a high emission intensity at 614 nm,which may be attributed to the^(5)D_(0)-^(7)F_(2)energy transition at the lower symmetry site of Eu^(3+).The optimal doping concentration of the phosphor is determined to be 11 mol%,with concentration quenching attributed to the exchange interaction mechanism.The overall color purity of the phosphor is up to 99.88%,with an internal quantum efficiency as high as 91.15%.Notably,Ca_(2)Y_(8)(BO_(4))_(2)(SiO_(4))_(4)F_(2):11 mol%Eu^(3+)(CYBSF:11 mol%Eu^(3+))phosphors exhibit good thermal stability,with a thermal quenching temperature(T1/2)of 552 K and the intensity of emission at 423 K still at 88.89%of that at 298 K.The activation energy of the phosphor is up to 0.30287 eV.Its comprehensive luminescence performance surpasses that of commercial red phosphor,making it suitable for near ultraviolet excited warm white light emitting diode(NUV-WLED)with a high color rendering index(Ra=82)and a correlated color temperature(CCT)of 4339 K.Moreover,the phosphor achieves latent fingerprint visualization and anti-counterfeiting ink on different material surfaces:glass,aluminum foil,plastic and paper.Overall,the fluorapatite CYBSF:11 mol%Eu^(3+)phosphor holds great potential for multimodal applications due to its high quantum efficiency and good thermal stability.
基金Shandong Provincial Cotton Green,High-yield and Efficient Creation Project(LNMZ[2017]5).
文摘Through the analysis of the impact of changes in the cotton planting industry on cotton production structure and benefit in Shandong under the national cotton production pattern in past ten years,based on the guarantee of food security and the overall ecological regional layout of Shandong s agricultural characteristic and advantageous industries,we proposed that through the development of high-quality short-season cotton and the industrial application of high-efficiency technologies,a green and high-efficiency farming system should be established to comprehensively reduce cotton planting costs,improve comparative benefits,and realize green and efficient optimization technologies that unify the stable production of cotton and high-quality cotton supply and the industrial path supported by the new industrial model.It is aimed to speed up the upgrading and transformation of the existing traditional cotton cropping system,reconstruct a ternary structure of grains,economic crops and fodder in the ecological suitable cotton areas and sub-suitable cotton areas in Shandong,and maintain a series of new green and ecological cotton rotation industrial models including the“double security”of the grain and cotton industries,the ecological“double superiority”of "cotton and fodder",and the high-efficiency"double increase"of cotton and garlic,providing a certain foundation for the research on technological integration innovation and industrial structure optimization of the green,efficient and high-quality development and transformation of the cotton industry in Shandong during the"14 th Five-Year Plan"period.
文摘Studies for many years have indicated that the seed yield of (Glycine max L. Merr.) soybean can be increased by increasing photosynthetic efficiency. The yield of cultivars with high photosynthetic efficiency (HPE) increased by 30% - 40% in comparison with the cultivars with normal photosynthetic efficiency, indicating that the breeding of soybean by increasing RPE may have a bright prospect. HPE breeding can be used as the temporal monitoring in the breeding process to avoid the divergency of the predetermined goal, although HPE breeding does not shorten the breeding time. It was observed that limited C-4 pathway exists in soybean leaf and pod, suggesting that by increasing the genetic expression of some C-4 enzymes in C-3 crops through traditional or genetic engineering techniques, new breakthroughs in increasing the photosynthetic efficiency of C-3 plant may be practicable in the future.
文摘Two new AlTiN coated cemented carbide drills with Al content of 40% and 55% in weight are developed for high efficiency dry drilling of 40Cr. By studying tool durability, machined hole quality, tool wear mechanism, chip deformation, and lubrication, the dry drilling performance of the two kinds of coated drills is analyzed. Experimental results show that the AlTiN coated drills are suitable for high efficiency dry drilling and can obtain higher quality of machined holes. The tool durability of the drill with 55% Al content is 1. 3 times of that of the drill with 40% Al content at the cutting speed of 90 m/min. The wear mechanism of two AlTiN coatings are studied in experiments. During dry drilling process, oxidative wear appears in both two kinds of drills. The oxide film is formed on the top of the coated drill containing Al content of 55%. And the oxide film helps to increase its high temperature resistance and decrease the coating flaking, thus the drill is failed because of coating subsidence. The drill with less Al content is failed due to peeling and breakage. The lubricated condition in dry drilling is improved by the high Al content coating. It helps to reduce the cutting deformation and benefits to improve the quality of machined holes. The AlTiN coating with higher Al content shows longer tool life and higher quality of machined holes in high efficiency dry drilling. Its tool life increases by 30% compared with that of the coating with less Al content.
基金Supported by China Agriculture Research System(CARS-05)National Natural Science Foundation of China(No.31260326)Personnel Training Plan of Technological Innovation of Yunnan Province(No.2012HB050)~~
文摘[Objective] This study aimed to investigate differences in phosphorus effi-ciency between two-rowed barley and multiple-rowed barley and differences in phos-phorus efficiency among various agronomic traits, and to explore the relationship be-tween agronomic traits and row type with phosphorus efficiency. [Method] Under available phosphorus mass fractions of 1.32 and 36.6 mg/kg, 172 barley varieties, including 79 two-rowed foreign barley, 22 multiple-rowed foreign barley, 58 two-rowed Chinese barley and 13 multiple-rowed Chinese barley, were selected to com-pare differences in phosphorus efficiency-related agronomic traits. Plant height, spike length, number of unfil ed grains, number of unfil ed grains, main panicle weight, to-tal panicle weight, total stem weight, weight of aerial part and heading stage were surveyed for statistical analysis. [Result] The results showed that, various agronomic traits were larger under fertilization condition than under non-fertilization condition ex-cept number of unfil ed grains and heading stage. Plant high, spike length, weight of aerial part and heading stage varied greatly under non-fertilization condition; number of fil ed grains, number of unfil ed grains and total stem weight varied greatly under fertilization condition. In two-rowed barley, plant height and number of fil ed grains of Chinese varieties were higher than those of foreign varieties, while other agronomic traits such as spike length, number of unfil ed grains, main panicle weight, total panicle weight, total stem weight, weight of aerial part and heading stage of foreign varieties were higher than those of Chinese varieties. Spike length and weight of aerial part in multiple-rowed and two-rowed foreign barley were higher than those in Chinese barley. In multiple-rowed barley, plant height, number of unfil ed grains, total panicle weight and total stem weight of foreign varieties were higher under non-fer-tilization condition and lower under fertilization condition compared with those of Chi-nese varieties; number of fil ed grains, main panicle weight and heading stage of foreign varieties were lower under non-fertilization condition and higher under fertil-ization condition compared with those of Chinese varieties. [Conclusion] Heading stage, number of fil ed grains, number of unfil ed grains and total stem weight are more sensitive to phosphorus efficiency. Multiple-rowed barley is more sensitive to phosphorus efficiency than two-rowed barley.
文摘Green manufacturing （GM） and high efficiency machining technology are inevitable trends in the field of advanced manufacturing of the 21st century. To ensure green and high-efficiency machining, a new high efficiency cooling technology-cryogenic pneumatic mist jet impinging cooling （CPMJI） technology is presented. For obtaining the best cooling effect, a little quantity of coolant is carried by high speed cryogenic air （-20 C ） and reaches the machining zone in the form of mist jet to enhance heat transfer. Experimental results indicate that under the conditions of 40 m/s in the jet impinging speed and 10 mm in the jet impinging distance, the critical heat flux（CHF） nearly reaches 6× 10^7 W/m^2, more than six times of the CHF of the grinding burn with a value of （8～10）×10^6 W/m^2.
文摘To understand the high yield and efficiency technique in hybrid rice Zhongzheyou No. 1, we conducted the correlation analysis, regression analysis and path analysis of hybrid rice Zhongzheyou No. 1 based on the data of its ear, grain and weight at different yield levels. From this study, we put forward the high yield and efficiency technique in Zhongzheyou No. 1 .. on the basis of certain effective ear number, filled grains per ear should be mainly targeted with a consideration to 1 000-grain weight.
文摘A novel AC to DC charge pump with high performance is presented. Due to the pMOS structure and threshold voltage canceling technology, the efficiency and the output voltage are greatly improved. Test results show that the output voltage and power efficiency are improved by 125% and 104% respectively at 13.56MHz for a 1V sinusoidal input compared to the traditional MOS diodes structure.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2007AA05Z207)National Science and Technology Support Scheme of China (Grant No. 2008BAF34B10)Jiangsu Provincial Graduate Student Innovation Foundation of China (Grant No. CX08B_064Z)
文摘The experimental investigation of axial-flow pump has been rapidly developed to meet the needs of South-to-North Water Diversion Project of China. Owing to the boundary conditions of hub, blade tip clearance, much of the physical phenomena and laws involved in this complex flow field can＇t be fully determined. The flow characteristics of the high efficiency axial-flow pump have been simulated by RNG k-e turbulence model and SIMPLEC arithmetic based on FLUENT software. Numerical results indicate that the data from the prediction show agreement with the experimental results, static pressure on pressure side of blades increases slightly at circumferential direction with radius increasing, and keep almost constant at the same radial while increasing gradually from inlet to exit on the suction side along flow direction at design conditions. The static pressure, total pressure and velocity at inlet, impeller outlet and vane outlet were measured by a five-hole probe, and a contrastive experiment was done to investigate the influence of hub leakage. The experimental results show that inlet flow is almost axial and the prerotation is very small at various conditions. The meridional velocity and circulation distribution are almost identical at impeller outlet at design conditions due to steady flow and high efficiency. The residual circulation exits at downstream of the guide vane, and the circumferential velocity component increases linearly from hub to tip at small flow rate conditions. Hub leakage in adjustable blades results in the decrease of the meridional velocity and circulation at blade exit near hub. The results of numerical simulation and experiments supply important flow structure information for the high-efficiency axial-flow pump.
基金funded by the National Natural Science Foundation of China (30971776)the National Transgenic Organism Research Program of China(2008ZX08010-004)
文摘Establishment of a highly efficient regeneration system for the mature embryo of wheat will provide a convenient tool for wheat tissue culture and transformation, thereby facilitating the transformation of foreign genes into wheat. By using the mature embryos derived from 20 different wheat lines including Shi 4185, Yumai 66, Lunxuan 987, CB037, Yangmai 6, Xinchun 9, Bobwhite, Han 6172, Zheng 9023, Jimai 20, Ningchun 4, and Jing 411, the effects of some factors including inoculation methods, initiating culture media, organic additives, antioxidants, and auxins on the regeneration from the explants were evaluated. The results indicated that the scraping embryo culture was better than the whole embryo culture, the Aa medium was better than the SD2 medium and dicamba was better than 2,4-D in increasing the regeneration frequency. An Adi medium was established in this study by adding silver nitrate, cysteine, ascorbic acid, dicamba, glutamine into the Aa medium at the concentration of 4,40, 100, 2, and 5 mg L^-1, respectively. By using the Adi medium and the scraping technique, the regeneration frequencies of the mature embryos of CB037, Lunxuan 987, Hart 6172, Yangmai 6, Bobwhite, Zheng 9023, Shi 4 185, and Jimai 20 became 85.6, 60,1, 46.0, 42.1,42.0, 34.0, 33.0, and 32.0%, respectively, which were about 5-8 times higher than that obtained from the conventional culture mediums and techniques. This novel regeneration system could be helpful in wheat transformation.
基金the Applied Technology Research and Development Projects of Hei Longjiang Province,China.(No.GA16A404)。
文摘The integral shrouded blisk provides better performance with minimum weight,but its semi-open structure presents problems for its production.Manufacturing processes of these components require a removal of about 70%-90%of material from their blanks.Multi-axis electrical discharge machining(EDM)is commonly used for these processes,but its poor efficiency cannot meet the requirements of mass production.Strong flushing assisted high-current discharge is able to improve the machining efficiency.In this paper,this method was applied to manufacture the integral shrouded blisk.An electrode design method was proposed.Taking the largest revolving entity inside the flow channel as the base geometry,this laminated arc-shaped hollow electrode meets the requirements such as high pressure flushing,tool wear compensation,and easy to be made.A 4-axis linkage machining tool path with planetary motion was proposed.Taking an integral guide vane ring as an example,it has been experimentally verified that the time consumption for each channel using this method was reduced to a half of the ordinary EDM method,while the finished surface quality remains same.
